1 /* 2 * IMX31 UARTS 3 * 4 * Copyright (c) 2008 OKL 5 * Originally Written by Hans Jiang 6 * Copyright (c) 2011 NICTA Pty Ltd. 7 * 8 * This work is licensed under the terms of the GNU GPL, version 2 or later. 9 * See the COPYING file in the top-level directory. 10 * 11 * This is a `bare-bones' implementation of the IMX series serial ports. 12 * TODO: 13 * -- implement FIFOs. The real hardware has 32 word transmit 14 * and receive FIFOs; we currently use a 1-char buffer 15 * -- implement DMA 16 * -- implement BAUD-rate and modem lines, for when the backend 17 * is a real serial device. 18 */ 19 20 #include "hw/hw.h" 21 #include "hw/sysbus.h" 22 #include "sysemu/sysemu.h" 23 #include "char/char.h" 24 #include "hw/arm/imx.h" 25 26 //#define DEBUG_SERIAL 1 27 #ifdef DEBUG_SERIAL 28 #define DPRINTF(fmt, args...) \ 29 do { printf("imx_serial: " fmt , ##args); } while (0) 30 #else 31 #define DPRINTF(fmt, args...) do {} while (0) 32 #endif 33 34 /* 35 * Define to 1 for messages about attempts to 36 * access unimplemented registers or similar. 37 */ 38 //#define DEBUG_IMPLEMENTATION 1 39 #ifdef DEBUG_IMPLEMENTATION 40 # define IPRINTF(fmt, args...) \ 41 do { fprintf(stderr, "imx_serial: " fmt, ##args); } while (0) 42 #else 43 # define IPRINTF(fmt, args...) do {} while (0) 44 #endif 45 46 typedef struct { 47 SysBusDevice busdev; 48 MemoryRegion iomem; 49 int32_t readbuff; 50 51 uint32_t usr1; 52 uint32_t usr2; 53 uint32_t ucr1; 54 uint32_t ucr2; 55 uint32_t uts1; 56 57 /* 58 * The registers below are implemented just so that the 59 * guest OS sees what it has written 60 */ 61 uint32_t onems; 62 uint32_t ufcr; 63 uint32_t ubmr; 64 uint32_t ubrc; 65 uint32_t ucr3; 66 67 qemu_irq irq; 68 CharDriverState *chr; 69 } IMXSerialState; 70 71 static const VMStateDescription vmstate_imx_serial = { 72 .name = "imx-serial", 73 .version_id = 1, 74 .minimum_version_id = 1, 75 .minimum_version_id_old = 1, 76 .fields = (VMStateField[]) { 77 VMSTATE_INT32(readbuff, IMXSerialState), 78 VMSTATE_UINT32(usr1, IMXSerialState), 79 VMSTATE_UINT32(usr2, IMXSerialState), 80 VMSTATE_UINT32(ucr1, IMXSerialState), 81 VMSTATE_UINT32(uts1, IMXSerialState), 82 VMSTATE_UINT32(onems, IMXSerialState), 83 VMSTATE_UINT32(ufcr, IMXSerialState), 84 VMSTATE_UINT32(ubmr, IMXSerialState), 85 VMSTATE_UINT32(ubrc, IMXSerialState), 86 VMSTATE_UINT32(ucr3, IMXSerialState), 87 VMSTATE_END_OF_LIST() 88 }, 89 }; 90 91 92 #define URXD_CHARRDY (1<<15) /* character read is valid */ 93 #define URXD_ERR (1<<14) /* Character has error */ 94 #define URXD_BRK (1<<11) /* Break received */ 95 96 #define USR1_PARTYER (1<<15) /* Parity Error */ 97 #define USR1_RTSS (1<<14) /* RTS pin status */ 98 #define USR1_TRDY (1<<13) /* Tx ready */ 99 #define USR1_RTSD (1<<12) /* RTS delta: pin changed state */ 100 #define USR1_ESCF (1<<11) /* Escape sequence interrupt */ 101 #define USR1_FRAMERR (1<<10) /* Framing error */ 102 #define USR1_RRDY (1<<9) /* receiver ready */ 103 #define USR1_AGTIM (1<<8) /* Aging timer interrupt */ 104 #define USR1_DTRD (1<<7) /* DTR changed */ 105 #define USR1_RXDS (1<<6) /* Receiver is idle */ 106 #define USR1_AIRINT (1<<5) /* Aysnch IR interrupt */ 107 #define USR1_AWAKE (1<<4) /* Falling edge detected on RXd pin */ 108 109 #define USR2_ADET (1<<15) /* Autobaud complete */ 110 #define USR2_TXFE (1<<14) /* Transmit FIFO empty */ 111 #define USR2_DTRF (1<<13) /* DTR/DSR transition */ 112 #define USR2_IDLE (1<<12) /* UART has been idle for too long */ 113 #define USR2_ACST (1<<11) /* Autobaud counter stopped */ 114 #define USR2_RIDELT (1<<10) /* Ring Indicator delta */ 115 #define USR2_RIIN (1<<9) /* Ring Indicator Input */ 116 #define USR2_IRINT (1<<8) /* Serial Infrared Interrupt */ 117 #define USR2_WAKE (1<<7) /* Start bit detected */ 118 #define USR2_DCDDELT (1<<6) /* Data Carrier Detect delta */ 119 #define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */ 120 #define USR2_RTSF (1<<4) /* RTS transition */ 121 #define USR2_TXDC (1<<3) /* Transmission complete */ 122 #define USR2_BRCD (1<<2) /* Break condition detected */ 123 #define USR2_ORE (1<<1) /* Overrun error */ 124 #define USR2_RDR (1<<0) /* Receive data ready */ 125 126 #define UCR1_TRDYEN (1<<13) /* Tx Ready Interrupt Enable */ 127 #define UCR1_RRDYEN (1<<9) /* Rx Ready Interrupt Enable */ 128 #define UCR1_TXMPTYEN (1<<6) /* Tx Empty Interrupt Enable */ 129 #define UCR1_UARTEN (1<<0) /* UART Enable */ 130 131 #define UCR2_TXEN (1<<2) /* Transmitter enable */ 132 #define UCR2_RXEN (1<<1) /* Receiver enable */ 133 #define UCR2_SRST (1<<0) /* Reset complete */ 134 135 #define UTS1_TXEMPTY (1<<6) 136 #define UTS1_RXEMPTY (1<<5) 137 #define UTS1_TXFULL (1<<4) 138 #define UTS1_RXFULL (1<<3) 139 140 static void imx_update(IMXSerialState *s) 141 { 142 uint32_t flags; 143 144 flags = (s->usr1 & s->ucr1) & (USR1_TRDY|USR1_RRDY); 145 if (!(s->ucr1 & UCR1_TXMPTYEN)) { 146 flags &= ~USR1_TRDY; 147 } 148 149 qemu_set_irq(s->irq, !!flags); 150 } 151 152 static void imx_serial_reset(IMXSerialState *s) 153 { 154 155 s->usr1 = USR1_TRDY | USR1_RXDS; 156 /* 157 * Fake attachment of a terminal: assert RTS. 158 */ 159 s->usr1 |= USR1_RTSS; 160 s->usr2 = USR2_TXFE | USR2_TXDC | USR2_DCDIN; 161 s->uts1 = UTS1_RXEMPTY | UTS1_TXEMPTY; 162 s->ucr1 = 0; 163 s->ucr2 = UCR2_SRST; 164 s->ucr3 = 0x700; 165 s->ubmr = 0; 166 s->ubrc = 4; 167 s->readbuff = URXD_ERR; 168 } 169 170 static void imx_serial_reset_at_boot(DeviceState *dev) 171 { 172 IMXSerialState *s = container_of(dev, IMXSerialState, busdev.qdev); 173 174 imx_serial_reset(s); 175 176 /* 177 * enable the uart on boot, so messages from the linux decompresser 178 * are visible. On real hardware this is done by the boot rom 179 * before anything else is loaded. 180 */ 181 s->ucr1 = UCR1_UARTEN; 182 s->ucr2 = UCR2_TXEN; 183 184 } 185 186 static uint64_t imx_serial_read(void *opaque, hwaddr offset, 187 unsigned size) 188 { 189 IMXSerialState *s = (IMXSerialState *)opaque; 190 uint32_t c; 191 192 DPRINTF("read(offset=%x)\n", offset >> 2); 193 switch (offset >> 2) { 194 case 0x0: /* URXD */ 195 c = s->readbuff; 196 if (!(s->uts1 & UTS1_RXEMPTY)) { 197 /* Character is valid */ 198 c |= URXD_CHARRDY; 199 s->usr1 &= ~USR1_RRDY; 200 s->usr2 &= ~USR2_RDR; 201 s->uts1 |= UTS1_RXEMPTY; 202 imx_update(s); 203 qemu_chr_accept_input(s->chr); 204 } 205 return c; 206 207 case 0x20: /* UCR1 */ 208 return s->ucr1; 209 210 case 0x21: /* UCR2 */ 211 return s->ucr2; 212 213 case 0x25: /* USR1 */ 214 return s->usr1; 215 216 case 0x26: /* USR2 */ 217 return s->usr2; 218 219 case 0x2A: /* BRM Modulator */ 220 return s->ubmr; 221 222 case 0x2B: /* Baud Rate Count */ 223 return s->ubrc; 224 225 case 0x2d: /* Test register */ 226 return s->uts1; 227 228 case 0x24: /* UFCR */ 229 return s->ufcr; 230 231 case 0x2c: 232 return s->onems; 233 234 case 0x22: /* UCR3 */ 235 return s->ucr3; 236 237 case 0x23: /* UCR4 */ 238 case 0x29: /* BRM Incremental */ 239 return 0x0; /* TODO */ 240 241 default: 242 IPRINTF("imx_serial_read: bad offset: 0x%x\n", (int)offset); 243 return 0; 244 } 245 } 246 247 static void imx_serial_write(void *opaque, hwaddr offset, 248 uint64_t value, unsigned size) 249 { 250 IMXSerialState *s = (IMXSerialState *)opaque; 251 unsigned char ch; 252 253 DPRINTF("write(offset=%x, value = %x) to %s\n", 254 offset >> 2, 255 (unsigned int)value, s->chr ? s->chr->label : "NODEV"); 256 257 switch (offset >> 2) { 258 case 0x10: /* UTXD */ 259 ch = value; 260 if (s->ucr2 & UCR2_TXEN) { 261 if (s->chr) { 262 qemu_chr_fe_write(s->chr, &ch, 1); 263 } 264 s->usr1 &= ~USR1_TRDY; 265 imx_update(s); 266 s->usr1 |= USR1_TRDY; 267 imx_update(s); 268 } 269 break; 270 271 case 0x20: /* UCR1 */ 272 s->ucr1 = value & 0xffff; 273 DPRINTF("write(ucr1=%x)\n", (unsigned int)value); 274 imx_update(s); 275 break; 276 277 case 0x21: /* UCR2 */ 278 /* 279 * Only a few bits in control register 2 are implemented as yet. 280 * If it's intended to use a real serial device as a back-end, this 281 * register will have to be implemented more fully. 282 */ 283 if (!(value & UCR2_SRST)) { 284 imx_serial_reset(s); 285 imx_update(s); 286 value |= UCR2_SRST; 287 } 288 if (value & UCR2_RXEN) { 289 if (!(s->ucr2 & UCR2_RXEN)) { 290 qemu_chr_accept_input(s->chr); 291 } 292 } 293 s->ucr2 = value & 0xffff; 294 break; 295 296 case 0x25: /* USR1 */ 297 value &= USR1_AWAKE | USR1_AIRINT | USR1_DTRD | USR1_AGTIM | 298 USR1_FRAMERR | USR1_ESCF | USR1_RTSD | USR1_PARTYER; 299 s->usr1 &= ~value; 300 break; 301 302 case 0x26: /* USR2 */ 303 /* 304 * Writing 1 to some bits clears them; all other 305 * values are ignored 306 */ 307 value &= USR2_ADET | USR2_DTRF | USR2_IDLE | USR2_ACST | 308 USR2_RIDELT | USR2_IRINT | USR2_WAKE | 309 USR2_DCDDELT | USR2_RTSF | USR2_BRCD | USR2_ORE; 310 s->usr2 &= ~value; 311 break; 312 313 /* 314 * Linux expects to see what it writes to these registers 315 * We don't currently alter the baud rate 316 */ 317 case 0x29: /* UBIR */ 318 s->ubrc = value & 0xffff; 319 break; 320 321 case 0x2a: /* UBMR */ 322 s->ubmr = value & 0xffff; 323 break; 324 325 case 0x2c: /* One ms reg */ 326 s->onems = value & 0xffff; 327 break; 328 329 case 0x24: /* FIFO control register */ 330 s->ufcr = value & 0xffff; 331 break; 332 333 case 0x22: /* UCR3 */ 334 s->ucr3 = value & 0xffff; 335 break; 336 337 case 0x2d: /* UTS1 */ 338 case 0x23: /* UCR4 */ 339 IPRINTF("Unimplemented Register %x written to\n", offset >> 2); 340 /* TODO */ 341 break; 342 343 default: 344 IPRINTF("imx_serial_write: Bad offset 0x%x\n", (int)offset); 345 } 346 } 347 348 static int imx_can_receive(void *opaque) 349 { 350 IMXSerialState *s = (IMXSerialState *)opaque; 351 return !(s->usr1 & USR1_RRDY); 352 } 353 354 static void imx_put_data(void *opaque, uint32_t value) 355 { 356 IMXSerialState *s = (IMXSerialState *)opaque; 357 DPRINTF("received char\n"); 358 s->usr1 |= USR1_RRDY; 359 s->usr2 |= USR2_RDR; 360 s->uts1 &= ~UTS1_RXEMPTY; 361 s->readbuff = value; 362 imx_update(s); 363 } 364 365 static void imx_receive(void *opaque, const uint8_t *buf, int size) 366 { 367 imx_put_data(opaque, *buf); 368 } 369 370 static void imx_event(void *opaque, int event) 371 { 372 if (event == CHR_EVENT_BREAK) { 373 imx_put_data(opaque, URXD_BRK); 374 } 375 } 376 377 378 static const struct MemoryRegionOps imx_serial_ops = { 379 .read = imx_serial_read, 380 .write = imx_serial_write, 381 .endianness = DEVICE_NATIVE_ENDIAN, 382 }; 383 384 static int imx_serial_init(SysBusDevice *dev) 385 { 386 IMXSerialState *s = FROM_SYSBUS(IMXSerialState, dev); 387 388 389 memory_region_init_io(&s->iomem, &imx_serial_ops, s, "imx-serial", 0x1000); 390 sysbus_init_mmio(dev, &s->iomem); 391 sysbus_init_irq(dev, &s->irq); 392 393 if (s->chr) { 394 qemu_chr_add_handlers(s->chr, imx_can_receive, imx_receive, 395 imx_event, s); 396 } else { 397 DPRINTF("No char dev for uart at 0x%lx\n", 398 (unsigned long)s->iomem.ram_addr); 399 } 400 401 return 0; 402 } 403 404 void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq) 405 { 406 DeviceState *dev; 407 SysBusDevice *bus; 408 CharDriverState *chr; 409 const char chr_name[] = "serial"; 410 char label[ARRAY_SIZE(chr_name) + 1]; 411 412 dev = qdev_create(NULL, "imx-serial"); 413 414 if (uart >= MAX_SERIAL_PORTS) { 415 hw_error("Cannot assign uart %d: QEMU supports only %d ports\n", 416 uart, MAX_SERIAL_PORTS); 417 } 418 chr = serial_hds[uart]; 419 if (!chr) { 420 snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, uart); 421 chr = qemu_chr_new(label, "null", NULL); 422 if (!(chr)) { 423 hw_error("Can't assign serial port to imx-uart%d.\n", uart); 424 } 425 } 426 427 qdev_prop_set_chr(dev, "chardev", chr); 428 bus = SYS_BUS_DEVICE(dev); 429 qdev_init_nofail(dev); 430 if (addr != (hwaddr)-1) { 431 sysbus_mmio_map(bus, 0, addr); 432 } 433 sysbus_connect_irq(bus, 0, irq); 434 435 } 436 437 438 static Property imx32_serial_properties[] = { 439 DEFINE_PROP_CHR("chardev", IMXSerialState, chr), 440 DEFINE_PROP_END_OF_LIST(), 441 }; 442 443 static void imx_serial_class_init(ObjectClass *klass, void *data) 444 { 445 DeviceClass *dc = DEVICE_CLASS(klass); 446 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 447 448 k->init = imx_serial_init; 449 dc->vmsd = &vmstate_imx_serial; 450 dc->reset = imx_serial_reset_at_boot; 451 dc->desc = "i.MX series UART"; 452 dc->props = imx32_serial_properties; 453 } 454 455 static const TypeInfo imx_serial_info = { 456 .name = "imx-serial", 457 .parent = TYPE_SYS_BUS_DEVICE, 458 .instance_size = sizeof(IMXSerialState), 459 .class_init = imx_serial_class_init, 460 }; 461 462 static void imx_serial_register_types(void) 463 { 464 type_register_static(&imx_serial_info); 465 } 466 467 type_init(imx_serial_register_types) 468