1 /* 2 * QEMU GRLIB APB UART Emulator 3 * 4 * Copyright (c) 2010-2019 AdaCore 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/irq.h" 27 #include "hw/qdev-properties.h" 28 #include "hw/qdev-properties-system.h" 29 #include "hw/sparc/grlib.h" 30 #include "hw/sysbus.h" 31 #include "qemu/module.h" 32 #include "chardev/char-fe.h" 33 34 #include "trace.h" 35 #include "qom/object.h" 36 37 #define UART_REG_SIZE 20 /* Size of memory mapped registers */ 38 39 /* UART status register fields */ 40 #define UART_DATA_READY (1 << 0) 41 #define UART_TRANSMIT_SHIFT_EMPTY (1 << 1) 42 #define UART_TRANSMIT_FIFO_EMPTY (1 << 2) 43 #define UART_BREAK_RECEIVED (1 << 3) 44 #define UART_OVERRUN (1 << 4) 45 #define UART_PARITY_ERROR (1 << 5) 46 #define UART_FRAMING_ERROR (1 << 6) 47 #define UART_TRANSMIT_FIFO_HALF (1 << 7) 48 #define UART_RECEIVE_FIFO_HALF (1 << 8) 49 #define UART_TRANSMIT_FIFO_FULL (1 << 9) 50 #define UART_RECEIVE_FIFO_FULL (1 << 10) 51 52 /* UART control register fields */ 53 #define UART_RECEIVE_ENABLE (1 << 0) 54 #define UART_TRANSMIT_ENABLE (1 << 1) 55 #define UART_RECEIVE_INTERRUPT (1 << 2) 56 #define UART_TRANSMIT_INTERRUPT (1 << 3) 57 #define UART_PARITY_SELECT (1 << 4) 58 #define UART_PARITY_ENABLE (1 << 5) 59 #define UART_FLOW_CONTROL (1 << 6) 60 #define UART_LOOPBACK (1 << 7) 61 #define UART_EXTERNAL_CLOCK (1 << 8) 62 #define UART_RECEIVE_FIFO_INTERRUPT (1 << 9) 63 #define UART_TRANSMIT_FIFO_INTERRUPT (1 << 10) 64 #define UART_FIFO_DEBUG_MODE (1 << 11) 65 #define UART_OUTPUT_ENABLE (1 << 12) 66 #define UART_FIFO_AVAILABLE (1 << 31) 67 68 /* Memory mapped register offsets */ 69 #define DATA_OFFSET 0x00 70 #define STATUS_OFFSET 0x04 71 #define CONTROL_OFFSET 0x08 72 #define SCALER_OFFSET 0x0C /* not supported */ 73 #define FIFO_DEBUG_OFFSET 0x10 /* not supported */ 74 75 #define FIFO_LENGTH 1024 76 77 OBJECT_DECLARE_SIMPLE_TYPE(UART, GRLIB_APB_UART) 78 79 struct UART { 80 SysBusDevice parent_obj; 81 82 MemoryRegion iomem; 83 qemu_irq irq; 84 85 CharBackend chr; 86 87 /* registers */ 88 uint32_t status; 89 uint32_t control; 90 91 /* FIFO */ 92 char buffer[FIFO_LENGTH]; 93 int len; 94 int current; 95 }; 96 97 static int uart_data_to_read(UART *uart) 98 { 99 return uart->current < uart->len; 100 } 101 102 static char uart_pop(UART *uart) 103 { 104 char ret; 105 106 if (uart->len == 0) { 107 uart->status &= ~UART_DATA_READY; 108 return 0; 109 } 110 111 ret = uart->buffer[uart->current++]; 112 113 if (uart->current >= uart->len) { 114 /* Flush */ 115 uart->len = 0; 116 uart->current = 0; 117 } 118 119 if (!uart_data_to_read(uart)) { 120 uart->status &= ~UART_DATA_READY; 121 } 122 123 return ret; 124 } 125 126 static void uart_add_to_fifo(UART *uart, 127 const uint8_t *buffer, 128 int length) 129 { 130 if (uart->len + length > FIFO_LENGTH) { 131 abort(); 132 } 133 memcpy(uart->buffer + uart->len, buffer, length); 134 uart->len += length; 135 } 136 137 static int grlib_apbuart_can_receive(void *opaque) 138 { 139 UART *uart = opaque; 140 141 return FIFO_LENGTH - uart->len; 142 } 143 144 static void grlib_apbuart_receive(void *opaque, const uint8_t *buf, int size) 145 { 146 UART *uart = opaque; 147 148 if (uart->control & UART_RECEIVE_ENABLE) { 149 uart_add_to_fifo(uart, buf, size); 150 151 uart->status |= UART_DATA_READY; 152 153 if (uart->control & UART_RECEIVE_INTERRUPT) { 154 qemu_irq_pulse(uart->irq); 155 } 156 } 157 } 158 159 static void grlib_apbuart_event(void *opaque, QEMUChrEvent event) 160 { 161 trace_grlib_apbuart_event(event); 162 } 163 164 165 static uint64_t grlib_apbuart_read(void *opaque, hwaddr addr, 166 unsigned size) 167 { 168 UART *uart = opaque; 169 170 addr &= 0xff; 171 172 /* Unit registers */ 173 switch (addr) { 174 case DATA_OFFSET: 175 case DATA_OFFSET + 3: /* when only one byte read */ 176 return uart_pop(uart); 177 178 case STATUS_OFFSET: 179 /* Read Only */ 180 return uart->status; 181 182 case CONTROL_OFFSET: 183 return uart->control; 184 185 case SCALER_OFFSET: 186 /* Not supported */ 187 return 0; 188 189 default: 190 trace_grlib_apbuart_readl_unknown(addr); 191 return 0; 192 } 193 } 194 195 static void grlib_apbuart_write(void *opaque, hwaddr addr, 196 uint64_t value, unsigned size) 197 { 198 UART *uart = opaque; 199 unsigned char c = 0; 200 201 addr &= 0xff; 202 203 /* Unit registers */ 204 switch (addr) { 205 case DATA_OFFSET: 206 case DATA_OFFSET + 3: /* When only one byte write */ 207 /* Transmit when character device available and transmitter enabled */ 208 if (qemu_chr_fe_backend_connected(&uart->chr) && 209 (uart->control & UART_TRANSMIT_ENABLE)) { 210 c = value & 0xFF; 211 /* XXX this blocks entire thread. Rewrite to use 212 * qemu_chr_fe_write and background I/O callbacks */ 213 qemu_chr_fe_write_all(&uart->chr, &c, 1); 214 /* Generate interrupt */ 215 if (uart->control & UART_TRANSMIT_INTERRUPT) { 216 qemu_irq_pulse(uart->irq); 217 } 218 } 219 return; 220 221 case STATUS_OFFSET: 222 /* Read Only */ 223 return; 224 225 case CONTROL_OFFSET: 226 uart->control = value; 227 return; 228 229 case SCALER_OFFSET: 230 /* Not supported */ 231 return; 232 233 default: 234 break; 235 } 236 237 trace_grlib_apbuart_writel_unknown(addr, value); 238 } 239 240 static const MemoryRegionOps grlib_apbuart_ops = { 241 .write = grlib_apbuart_write, 242 .read = grlib_apbuart_read, 243 .endianness = DEVICE_NATIVE_ENDIAN, 244 }; 245 246 static void grlib_apbuart_realize(DeviceState *dev, Error **errp) 247 { 248 UART *uart = GRLIB_APB_UART(dev); 249 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 250 251 qemu_chr_fe_set_handlers(&uart->chr, 252 grlib_apbuart_can_receive, 253 grlib_apbuart_receive, 254 grlib_apbuart_event, 255 NULL, uart, NULL, true); 256 257 sysbus_init_irq(sbd, &uart->irq); 258 259 memory_region_init_io(&uart->iomem, OBJECT(uart), &grlib_apbuart_ops, uart, 260 "uart", UART_REG_SIZE); 261 262 sysbus_init_mmio(sbd, &uart->iomem); 263 } 264 265 static void grlib_apbuart_reset(DeviceState *d) 266 { 267 UART *uart = GRLIB_APB_UART(d); 268 269 /* Transmitter FIFO and shift registers are always empty in QEMU */ 270 uart->status = UART_TRANSMIT_FIFO_EMPTY | UART_TRANSMIT_SHIFT_EMPTY; 271 /* Everything is off */ 272 uart->control = 0; 273 /* Flush receive FIFO */ 274 uart->len = 0; 275 uart->current = 0; 276 } 277 278 static Property grlib_apbuart_properties[] = { 279 DEFINE_PROP_CHR("chrdev", UART, chr), 280 DEFINE_PROP_END_OF_LIST(), 281 }; 282 283 static void grlib_apbuart_class_init(ObjectClass *klass, void *data) 284 { 285 DeviceClass *dc = DEVICE_CLASS(klass); 286 287 dc->realize = grlib_apbuart_realize; 288 dc->reset = grlib_apbuart_reset; 289 device_class_set_props(dc, grlib_apbuart_properties); 290 } 291 292 static const TypeInfo grlib_apbuart_info = { 293 .name = TYPE_GRLIB_APB_UART, 294 .parent = TYPE_SYS_BUS_DEVICE, 295 .instance_size = sizeof(UART), 296 .class_init = grlib_apbuart_class_init, 297 }; 298 299 static void grlib_apbuart_register_types(void) 300 { 301 type_register_static(&grlib_apbuart_info); 302 } 303 304 type_init(grlib_apbuart_register_types) 305