1 /* 2 * QEMU GRLIB APB UART Emulator 3 * 4 * Copyright (c) 2010-2011 AdaCore 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/sysbus.h" 27 #include "chardev/char-fe.h" 28 29 #include "trace.h" 30 31 #define UART_REG_SIZE 20 /* Size of memory mapped registers */ 32 33 /* UART status register fields */ 34 #define UART_DATA_READY (1 << 0) 35 #define UART_TRANSMIT_SHIFT_EMPTY (1 << 1) 36 #define UART_TRANSMIT_FIFO_EMPTY (1 << 2) 37 #define UART_BREAK_RECEIVED (1 << 3) 38 #define UART_OVERRUN (1 << 4) 39 #define UART_PARITY_ERROR (1 << 5) 40 #define UART_FRAMING_ERROR (1 << 6) 41 #define UART_TRANSMIT_FIFO_HALF (1 << 7) 42 #define UART_RECEIVE_FIFO_HALF (1 << 8) 43 #define UART_TRANSMIT_FIFO_FULL (1 << 9) 44 #define UART_RECEIVE_FIFO_FULL (1 << 10) 45 46 /* UART control register fields */ 47 #define UART_RECEIVE_ENABLE (1 << 0) 48 #define UART_TRANSMIT_ENABLE (1 << 1) 49 #define UART_RECEIVE_INTERRUPT (1 << 2) 50 #define UART_TRANSMIT_INTERRUPT (1 << 3) 51 #define UART_PARITY_SELECT (1 << 4) 52 #define UART_PARITY_ENABLE (1 << 5) 53 #define UART_FLOW_CONTROL (1 << 6) 54 #define UART_LOOPBACK (1 << 7) 55 #define UART_EXTERNAL_CLOCK (1 << 8) 56 #define UART_RECEIVE_FIFO_INTERRUPT (1 << 9) 57 #define UART_TRANSMIT_FIFO_INTERRUPT (1 << 10) 58 #define UART_FIFO_DEBUG_MODE (1 << 11) 59 #define UART_OUTPUT_ENABLE (1 << 12) 60 #define UART_FIFO_AVAILABLE (1 << 31) 61 62 /* Memory mapped register offsets */ 63 #define DATA_OFFSET 0x00 64 #define STATUS_OFFSET 0x04 65 #define CONTROL_OFFSET 0x08 66 #define SCALER_OFFSET 0x0C /* not supported */ 67 #define FIFO_DEBUG_OFFSET 0x10 /* not supported */ 68 69 #define FIFO_LENGTH 1024 70 71 #define TYPE_GRLIB_APB_UART "grlib,apbuart" 72 #define GRLIB_APB_UART(obj) \ 73 OBJECT_CHECK(UART, (obj), TYPE_GRLIB_APB_UART) 74 75 typedef struct UART { 76 SysBusDevice parent_obj; 77 78 MemoryRegion iomem; 79 qemu_irq irq; 80 81 CharBackend chr; 82 83 /* registers */ 84 uint32_t status; 85 uint32_t control; 86 87 /* FIFO */ 88 char buffer[FIFO_LENGTH]; 89 int len; 90 int current; 91 } UART; 92 93 static int uart_data_to_read(UART *uart) 94 { 95 return uart->current < uart->len; 96 } 97 98 static char uart_pop(UART *uart) 99 { 100 char ret; 101 102 if (uart->len == 0) { 103 uart->status &= ~UART_DATA_READY; 104 return 0; 105 } 106 107 ret = uart->buffer[uart->current++]; 108 109 if (uart->current >= uart->len) { 110 /* Flush */ 111 uart->len = 0; 112 uart->current = 0; 113 } 114 115 if (!uart_data_to_read(uart)) { 116 uart->status &= ~UART_DATA_READY; 117 } 118 119 return ret; 120 } 121 122 static void uart_add_to_fifo(UART *uart, 123 const uint8_t *buffer, 124 int length) 125 { 126 if (uart->len + length > FIFO_LENGTH) { 127 abort(); 128 } 129 memcpy(uart->buffer + uart->len, buffer, length); 130 uart->len += length; 131 } 132 133 static int grlib_apbuart_can_receive(void *opaque) 134 { 135 UART *uart = opaque; 136 137 return FIFO_LENGTH - uart->len; 138 } 139 140 static void grlib_apbuart_receive(void *opaque, const uint8_t *buf, int size) 141 { 142 UART *uart = opaque; 143 144 if (uart->control & UART_RECEIVE_ENABLE) { 145 uart_add_to_fifo(uart, buf, size); 146 147 uart->status |= UART_DATA_READY; 148 149 if (uart->control & UART_RECEIVE_INTERRUPT) { 150 qemu_irq_pulse(uart->irq); 151 } 152 } 153 } 154 155 static void grlib_apbuart_event(void *opaque, int event) 156 { 157 trace_grlib_apbuart_event(event); 158 } 159 160 161 static uint64_t grlib_apbuart_read(void *opaque, hwaddr addr, 162 unsigned size) 163 { 164 UART *uart = opaque; 165 166 addr &= 0xff; 167 168 /* Unit registers */ 169 switch (addr) { 170 case DATA_OFFSET: 171 case DATA_OFFSET + 3: /* when only one byte read */ 172 return uart_pop(uart); 173 174 case STATUS_OFFSET: 175 /* Read Only */ 176 return uart->status; 177 178 case CONTROL_OFFSET: 179 return uart->control; 180 181 case SCALER_OFFSET: 182 /* Not supported */ 183 return 0; 184 185 default: 186 trace_grlib_apbuart_readl_unknown(addr); 187 return 0; 188 } 189 } 190 191 static void grlib_apbuart_write(void *opaque, hwaddr addr, 192 uint64_t value, unsigned size) 193 { 194 UART *uart = opaque; 195 unsigned char c = 0; 196 197 addr &= 0xff; 198 199 /* Unit registers */ 200 switch (addr) { 201 case DATA_OFFSET: 202 case DATA_OFFSET + 3: /* When only one byte write */ 203 /* Transmit when character device available and transmitter enabled */ 204 if (qemu_chr_fe_backend_connected(&uart->chr) && 205 (uart->control & UART_TRANSMIT_ENABLE)) { 206 c = value & 0xFF; 207 /* XXX this blocks entire thread. Rewrite to use 208 * qemu_chr_fe_write and background I/O callbacks */ 209 qemu_chr_fe_write_all(&uart->chr, &c, 1); 210 /* Generate interrupt */ 211 if (uart->control & UART_TRANSMIT_INTERRUPT) { 212 qemu_irq_pulse(uart->irq); 213 } 214 } 215 return; 216 217 case STATUS_OFFSET: 218 /* Read Only */ 219 return; 220 221 case CONTROL_OFFSET: 222 uart->control = value; 223 return; 224 225 case SCALER_OFFSET: 226 /* Not supported */ 227 return; 228 229 default: 230 break; 231 } 232 233 trace_grlib_apbuart_writel_unknown(addr, value); 234 } 235 236 static const MemoryRegionOps grlib_apbuart_ops = { 237 .write = grlib_apbuart_write, 238 .read = grlib_apbuart_read, 239 .endianness = DEVICE_NATIVE_ENDIAN, 240 }; 241 242 static int grlib_apbuart_init(SysBusDevice *dev) 243 { 244 UART *uart = GRLIB_APB_UART(dev); 245 246 qemu_chr_fe_set_handlers(&uart->chr, 247 grlib_apbuart_can_receive, 248 grlib_apbuart_receive, 249 grlib_apbuart_event, 250 NULL, uart, NULL, true); 251 252 sysbus_init_irq(dev, &uart->irq); 253 254 memory_region_init_io(&uart->iomem, OBJECT(uart), &grlib_apbuart_ops, uart, 255 "uart", UART_REG_SIZE); 256 257 sysbus_init_mmio(dev, &uart->iomem); 258 259 return 0; 260 } 261 262 static void grlib_apbuart_reset(DeviceState *d) 263 { 264 UART *uart = GRLIB_APB_UART(d); 265 266 /* Transmitter FIFO and shift registers are always empty in QEMU */ 267 uart->status = UART_TRANSMIT_FIFO_EMPTY | UART_TRANSMIT_SHIFT_EMPTY; 268 /* Everything is off */ 269 uart->control = 0; 270 /* Flush receive FIFO */ 271 uart->len = 0; 272 uart->current = 0; 273 } 274 275 static Property grlib_apbuart_properties[] = { 276 DEFINE_PROP_CHR("chrdev", UART, chr), 277 DEFINE_PROP_END_OF_LIST(), 278 }; 279 280 static void grlib_apbuart_class_init(ObjectClass *klass, void *data) 281 { 282 DeviceClass *dc = DEVICE_CLASS(klass); 283 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 284 285 k->init = grlib_apbuart_init; 286 dc->reset = grlib_apbuart_reset; 287 dc->props = grlib_apbuart_properties; 288 } 289 290 static const TypeInfo grlib_apbuart_info = { 291 .name = TYPE_GRLIB_APB_UART, 292 .parent = TYPE_SYS_BUS_DEVICE, 293 .instance_size = sizeof(UART), 294 .class_init = grlib_apbuart_class_init, 295 }; 296 297 static void grlib_apbuart_register_types(void) 298 { 299 type_register_static(&grlib_apbuart_info); 300 } 301 302 type_init(grlib_apbuart_register_types) 303