1 /* 2 * QEMU GRLIB APB UART Emulator 3 * 4 * Copyright (c) 2010-2019 AdaCore 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/irq.h" 27 #include "hw/qdev-properties.h" 28 #include "hw/sparc/grlib.h" 29 #include "hw/sysbus.h" 30 #include "qemu/module.h" 31 #include "chardev/char-fe.h" 32 33 #include "trace.h" 34 #include "qom/object.h" 35 36 #define UART_REG_SIZE 20 /* Size of memory mapped registers */ 37 38 /* UART status register fields */ 39 #define UART_DATA_READY (1 << 0) 40 #define UART_TRANSMIT_SHIFT_EMPTY (1 << 1) 41 #define UART_TRANSMIT_FIFO_EMPTY (1 << 2) 42 #define UART_BREAK_RECEIVED (1 << 3) 43 #define UART_OVERRUN (1 << 4) 44 #define UART_PARITY_ERROR (1 << 5) 45 #define UART_FRAMING_ERROR (1 << 6) 46 #define UART_TRANSMIT_FIFO_HALF (1 << 7) 47 #define UART_RECEIVE_FIFO_HALF (1 << 8) 48 #define UART_TRANSMIT_FIFO_FULL (1 << 9) 49 #define UART_RECEIVE_FIFO_FULL (1 << 10) 50 51 /* UART control register fields */ 52 #define UART_RECEIVE_ENABLE (1 << 0) 53 #define UART_TRANSMIT_ENABLE (1 << 1) 54 #define UART_RECEIVE_INTERRUPT (1 << 2) 55 #define UART_TRANSMIT_INTERRUPT (1 << 3) 56 #define UART_PARITY_SELECT (1 << 4) 57 #define UART_PARITY_ENABLE (1 << 5) 58 #define UART_FLOW_CONTROL (1 << 6) 59 #define UART_LOOPBACK (1 << 7) 60 #define UART_EXTERNAL_CLOCK (1 << 8) 61 #define UART_RECEIVE_FIFO_INTERRUPT (1 << 9) 62 #define UART_TRANSMIT_FIFO_INTERRUPT (1 << 10) 63 #define UART_FIFO_DEBUG_MODE (1 << 11) 64 #define UART_OUTPUT_ENABLE (1 << 12) 65 #define UART_FIFO_AVAILABLE (1 << 31) 66 67 /* Memory mapped register offsets */ 68 #define DATA_OFFSET 0x00 69 #define STATUS_OFFSET 0x04 70 #define CONTROL_OFFSET 0x08 71 #define SCALER_OFFSET 0x0C /* not supported */ 72 #define FIFO_DEBUG_OFFSET 0x10 /* not supported */ 73 74 #define FIFO_LENGTH 1024 75 76 OBJECT_DECLARE_SIMPLE_TYPE(UART, GRLIB_APB_UART) 77 78 struct UART { 79 SysBusDevice parent_obj; 80 81 MemoryRegion iomem; 82 qemu_irq irq; 83 84 CharBackend chr; 85 86 /* registers */ 87 uint32_t status; 88 uint32_t control; 89 90 /* FIFO */ 91 char buffer[FIFO_LENGTH]; 92 int len; 93 int current; 94 }; 95 96 static int uart_data_to_read(UART *uart) 97 { 98 return uart->current < uart->len; 99 } 100 101 static char uart_pop(UART *uart) 102 { 103 char ret; 104 105 if (uart->len == 0) { 106 uart->status &= ~UART_DATA_READY; 107 return 0; 108 } 109 110 ret = uart->buffer[uart->current++]; 111 112 if (uart->current >= uart->len) { 113 /* Flush */ 114 uart->len = 0; 115 uart->current = 0; 116 } 117 118 if (!uart_data_to_read(uart)) { 119 uart->status &= ~UART_DATA_READY; 120 } 121 122 return ret; 123 } 124 125 static void uart_add_to_fifo(UART *uart, 126 const uint8_t *buffer, 127 int length) 128 { 129 if (uart->len + length > FIFO_LENGTH) { 130 abort(); 131 } 132 memcpy(uart->buffer + uart->len, buffer, length); 133 uart->len += length; 134 } 135 136 static int grlib_apbuart_can_receive(void *opaque) 137 { 138 UART *uart = opaque; 139 140 return FIFO_LENGTH - uart->len; 141 } 142 143 static void grlib_apbuart_receive(void *opaque, const uint8_t *buf, int size) 144 { 145 UART *uart = opaque; 146 147 if (uart->control & UART_RECEIVE_ENABLE) { 148 uart_add_to_fifo(uart, buf, size); 149 150 uart->status |= UART_DATA_READY; 151 152 if (uart->control & UART_RECEIVE_INTERRUPT) { 153 qemu_irq_pulse(uart->irq); 154 } 155 } 156 } 157 158 static void grlib_apbuart_event(void *opaque, QEMUChrEvent event) 159 { 160 trace_grlib_apbuart_event(event); 161 } 162 163 164 static uint64_t grlib_apbuart_read(void *opaque, hwaddr addr, 165 unsigned size) 166 { 167 UART *uart = opaque; 168 169 addr &= 0xff; 170 171 /* Unit registers */ 172 switch (addr) { 173 case DATA_OFFSET: 174 case DATA_OFFSET + 3: /* when only one byte read */ 175 return uart_pop(uart); 176 177 case STATUS_OFFSET: 178 /* Read Only */ 179 return uart->status; 180 181 case CONTROL_OFFSET: 182 return uart->control; 183 184 case SCALER_OFFSET: 185 /* Not supported */ 186 return 0; 187 188 default: 189 trace_grlib_apbuart_readl_unknown(addr); 190 return 0; 191 } 192 } 193 194 static void grlib_apbuart_write(void *opaque, hwaddr addr, 195 uint64_t value, unsigned size) 196 { 197 UART *uart = opaque; 198 unsigned char c = 0; 199 200 addr &= 0xff; 201 202 /* Unit registers */ 203 switch (addr) { 204 case DATA_OFFSET: 205 case DATA_OFFSET + 3: /* When only one byte write */ 206 /* Transmit when character device available and transmitter enabled */ 207 if (qemu_chr_fe_backend_connected(&uart->chr) && 208 (uart->control & UART_TRANSMIT_ENABLE)) { 209 c = value & 0xFF; 210 /* XXX this blocks entire thread. Rewrite to use 211 * qemu_chr_fe_write and background I/O callbacks */ 212 qemu_chr_fe_write_all(&uart->chr, &c, 1); 213 /* Generate interrupt */ 214 if (uart->control & UART_TRANSMIT_INTERRUPT) { 215 qemu_irq_pulse(uart->irq); 216 } 217 } 218 return; 219 220 case STATUS_OFFSET: 221 /* Read Only */ 222 return; 223 224 case CONTROL_OFFSET: 225 uart->control = value; 226 return; 227 228 case SCALER_OFFSET: 229 /* Not supported */ 230 return; 231 232 default: 233 break; 234 } 235 236 trace_grlib_apbuart_writel_unknown(addr, value); 237 } 238 239 static const MemoryRegionOps grlib_apbuart_ops = { 240 .write = grlib_apbuart_write, 241 .read = grlib_apbuart_read, 242 .endianness = DEVICE_NATIVE_ENDIAN, 243 }; 244 245 static void grlib_apbuart_realize(DeviceState *dev, Error **errp) 246 { 247 UART *uart = GRLIB_APB_UART(dev); 248 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 249 250 qemu_chr_fe_set_handlers(&uart->chr, 251 grlib_apbuart_can_receive, 252 grlib_apbuart_receive, 253 grlib_apbuart_event, 254 NULL, uart, NULL, true); 255 256 sysbus_init_irq(sbd, &uart->irq); 257 258 memory_region_init_io(&uart->iomem, OBJECT(uart), &grlib_apbuart_ops, uart, 259 "uart", UART_REG_SIZE); 260 261 sysbus_init_mmio(sbd, &uart->iomem); 262 } 263 264 static void grlib_apbuart_reset(DeviceState *d) 265 { 266 UART *uart = GRLIB_APB_UART(d); 267 268 /* Transmitter FIFO and shift registers are always empty in QEMU */ 269 uart->status = UART_TRANSMIT_FIFO_EMPTY | UART_TRANSMIT_SHIFT_EMPTY; 270 /* Everything is off */ 271 uart->control = 0; 272 /* Flush receive FIFO */ 273 uart->len = 0; 274 uart->current = 0; 275 } 276 277 static Property grlib_apbuart_properties[] = { 278 DEFINE_PROP_CHR("chrdev", UART, chr), 279 DEFINE_PROP_END_OF_LIST(), 280 }; 281 282 static void grlib_apbuart_class_init(ObjectClass *klass, void *data) 283 { 284 DeviceClass *dc = DEVICE_CLASS(klass); 285 286 dc->realize = grlib_apbuart_realize; 287 dc->reset = grlib_apbuart_reset; 288 device_class_set_props(dc, grlib_apbuart_properties); 289 } 290 291 static const TypeInfo grlib_apbuart_info = { 292 .name = TYPE_GRLIB_APB_UART, 293 .parent = TYPE_SYS_BUS_DEVICE, 294 .instance_size = sizeof(UART), 295 .class_init = grlib_apbuart_class_init, 296 }; 297 298 static void grlib_apbuart_register_types(void) 299 { 300 type_register_static(&grlib_apbuart_info); 301 } 302 303 type_init(grlib_apbuart_register_types) 304