1 /* 2 * Exynos4210 UART Emulation 3 * 4 * Copyright (C) 2011 Samsung Electronics Co Ltd. 5 * Maksim Kozlov, <m.kozlov@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 15 * for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 * 20 */ 21 22 #include "qemu/osdep.h" 23 #include "hw/sysbus.h" 24 #include "qemu/error-report.h" 25 #include "sysemu/sysemu.h" 26 #include "sysemu/char.h" 27 28 #include "hw/arm/exynos4210.h" 29 30 #undef DEBUG_UART 31 #undef DEBUG_UART_EXTEND 32 #undef DEBUG_IRQ 33 #undef DEBUG_Rx_DATA 34 #undef DEBUG_Tx_DATA 35 36 #define DEBUG_UART 0 37 #define DEBUG_UART_EXTEND 0 38 #define DEBUG_IRQ 0 39 #define DEBUG_Rx_DATA 0 40 #define DEBUG_Tx_DATA 0 41 42 #if DEBUG_UART 43 #define PRINT_DEBUG(fmt, args...) \ 44 do { \ 45 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 46 } while (0) 47 48 #if DEBUG_UART_EXTEND 49 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 50 do { \ 51 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 52 } while (0) 53 #else 54 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 55 do {} while (0) 56 #endif /* EXTEND */ 57 58 #else 59 #define PRINT_DEBUG(fmt, args...) \ 60 do {} while (0) 61 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 62 do {} while (0) 63 #endif 64 65 #define PRINT_ERROR(fmt, args...) \ 66 do { \ 67 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 68 } while (0) 69 70 /* 71 * Offsets for UART registers relative to SFR base address 72 * for UARTn 73 * 74 */ 75 #define ULCON 0x0000 /* Line Control */ 76 #define UCON 0x0004 /* Control */ 77 #define UFCON 0x0008 /* FIFO Control */ 78 #define UMCON 0x000C /* Modem Control */ 79 #define UTRSTAT 0x0010 /* Tx/Rx Status */ 80 #define UERSTAT 0x0014 /* UART Error Status */ 81 #define UFSTAT 0x0018 /* FIFO Status */ 82 #define UMSTAT 0x001C /* Modem Status */ 83 #define UTXH 0x0020 /* Transmit Buffer */ 84 #define URXH 0x0024 /* Receive Buffer */ 85 #define UBRDIV 0x0028 /* Baud Rate Divisor */ 86 #define UFRACVAL 0x002C /* Divisor Fractional Value */ 87 #define UINTP 0x0030 /* Interrupt Pending */ 88 #define UINTSP 0x0034 /* Interrupt Source Pending */ 89 #define UINTM 0x0038 /* Interrupt Mask */ 90 91 /* 92 * for indexing register in the uint32_t array 93 * 94 * 'reg' - register offset (see offsets definitions above) 95 * 96 */ 97 #define I_(reg) (reg / sizeof(uint32_t)) 98 99 typedef struct Exynos4210UartReg { 100 const char *name; /* the only reason is the debug output */ 101 hwaddr offset; 102 uint32_t reset_value; 103 } Exynos4210UartReg; 104 105 static Exynos4210UartReg exynos4210_uart_regs[] = { 106 {"ULCON", ULCON, 0x00000000}, 107 {"UCON", UCON, 0x00003000}, 108 {"UFCON", UFCON, 0x00000000}, 109 {"UMCON", UMCON, 0x00000000}, 110 {"UTRSTAT", UTRSTAT, 0x00000006}, /* RO */ 111 {"UERSTAT", UERSTAT, 0x00000000}, /* RO */ 112 {"UFSTAT", UFSTAT, 0x00000000}, /* RO */ 113 {"UMSTAT", UMSTAT, 0x00000000}, /* RO */ 114 {"UTXH", UTXH, 0x5c5c5c5c}, /* WO, undefined reset value*/ 115 {"URXH", URXH, 0x00000000}, /* RO */ 116 {"UBRDIV", UBRDIV, 0x00000000}, 117 {"UFRACVAL", UFRACVAL, 0x00000000}, 118 {"UINTP", UINTP, 0x00000000}, 119 {"UINTSP", UINTSP, 0x00000000}, 120 {"UINTM", UINTM, 0x00000000}, 121 }; 122 123 #define EXYNOS4210_UART_REGS_MEM_SIZE 0x3C 124 125 /* UART FIFO Control */ 126 #define UFCON_FIFO_ENABLE 0x1 127 #define UFCON_Rx_FIFO_RESET 0x2 128 #define UFCON_Tx_FIFO_RESET 0x4 129 #define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT 8 130 #define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT) 131 #define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT 4 132 #define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT) 133 134 /* Uart FIFO Status */ 135 #define UFSTAT_Rx_FIFO_COUNT 0xff 136 #define UFSTAT_Rx_FIFO_FULL 0x100 137 #define UFSTAT_Rx_FIFO_ERROR 0x200 138 #define UFSTAT_Tx_FIFO_COUNT_SHIFT 16 139 #define UFSTAT_Tx_FIFO_COUNT (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT) 140 #define UFSTAT_Tx_FIFO_FULL_SHIFT 24 141 #define UFSTAT_Tx_FIFO_FULL (1 << UFSTAT_Tx_FIFO_FULL_SHIFT) 142 143 /* UART Interrupt Source Pending */ 144 #define UINTSP_RXD 0x1 /* Receive interrupt */ 145 #define UINTSP_ERROR 0x2 /* Error interrupt */ 146 #define UINTSP_TXD 0x4 /* Transmit interrupt */ 147 #define UINTSP_MODEM 0x8 /* Modem interrupt */ 148 149 /* UART Line Control */ 150 #define ULCON_IR_MODE_SHIFT 6 151 #define ULCON_PARITY_SHIFT 3 152 #define ULCON_STOP_BIT_SHIFT 1 153 154 /* UART Tx/Rx Status */ 155 #define UTRSTAT_TRANSMITTER_EMPTY 0x4 156 #define UTRSTAT_Tx_BUFFER_EMPTY 0x2 157 #define UTRSTAT_Rx_BUFFER_DATA_READY 0x1 158 159 /* UART Error Status */ 160 #define UERSTAT_OVERRUN 0x1 161 #define UERSTAT_PARITY 0x2 162 #define UERSTAT_FRAME 0x4 163 #define UERSTAT_BREAK 0x8 164 165 typedef struct { 166 uint8_t *data; 167 uint32_t sp, rp; /* store and retrieve pointers */ 168 uint32_t size; 169 } Exynos4210UartFIFO; 170 171 #define TYPE_EXYNOS4210_UART "exynos4210.uart" 172 #define EXYNOS4210_UART(obj) \ 173 OBJECT_CHECK(Exynos4210UartState, (obj), TYPE_EXYNOS4210_UART) 174 175 typedef struct Exynos4210UartState { 176 SysBusDevice parent_obj; 177 178 MemoryRegion iomem; 179 180 uint32_t reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)]; 181 Exynos4210UartFIFO rx; 182 Exynos4210UartFIFO tx; 183 184 CharBackend chr; 185 qemu_irq irq; 186 187 uint32_t channel; 188 189 } Exynos4210UartState; 190 191 192 #if DEBUG_UART 193 /* Used only for debugging inside PRINT_DEBUG_... macros */ 194 static const char *exynos4210_uart_regname(hwaddr offset) 195 { 196 197 int i; 198 199 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { 200 if (offset == exynos4210_uart_regs[i].offset) { 201 return exynos4210_uart_regs[i].name; 202 } 203 } 204 205 return NULL; 206 } 207 #endif 208 209 210 static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch) 211 { 212 q->data[q->sp] = ch; 213 q->sp = (q->sp + 1) % q->size; 214 } 215 216 static uint8_t fifo_retrieve(Exynos4210UartFIFO *q) 217 { 218 uint8_t ret = q->data[q->rp]; 219 q->rp = (q->rp + 1) % q->size; 220 return ret; 221 } 222 223 static int fifo_elements_number(Exynos4210UartFIFO *q) 224 { 225 if (q->sp < q->rp) { 226 return q->size - q->rp + q->sp; 227 } 228 229 return q->sp - q->rp; 230 } 231 232 static int fifo_empty_elements_number(Exynos4210UartFIFO *q) 233 { 234 return q->size - fifo_elements_number(q); 235 } 236 237 static void fifo_reset(Exynos4210UartFIFO *q) 238 { 239 g_free(q->data); 240 q->data = NULL; 241 242 q->data = (uint8_t *)g_malloc0(q->size); 243 244 q->sp = 0; 245 q->rp = 0; 246 } 247 248 static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(Exynos4210UartState *s) 249 { 250 uint32_t level = 0; 251 uint32_t reg; 252 253 reg = (s->reg[I_(UFCON)] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >> 254 UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT; 255 256 switch (s->channel) { 257 case 0: 258 level = reg * 32; 259 break; 260 case 1: 261 case 4: 262 level = reg * 8; 263 break; 264 case 2: 265 case 3: 266 level = reg * 2; 267 break; 268 default: 269 level = 0; 270 PRINT_ERROR("Wrong UART channel number: %d\n", s->channel); 271 } 272 273 return level; 274 } 275 276 static void exynos4210_uart_update_irq(Exynos4210UartState *s) 277 { 278 /* 279 * The Tx interrupt is always requested if the number of data in the 280 * transmit FIFO is smaller than the trigger level. 281 */ 282 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 283 284 uint32_t count = (s->reg[I_(UFSTAT)] & UFSTAT_Tx_FIFO_COUNT) >> 285 UFSTAT_Tx_FIFO_COUNT_SHIFT; 286 287 if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) { 288 s->reg[I_(UINTSP)] |= UINTSP_TXD; 289 } 290 } 291 292 s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)]; 293 294 if (s->reg[I_(UINTP)]) { 295 qemu_irq_raise(s->irq); 296 297 #if DEBUG_IRQ 298 fprintf(stderr, "UART%d: IRQ has been raised: %08x\n", 299 s->channel, s->reg[I_(UINTP)]); 300 #endif 301 302 } else { 303 qemu_irq_lower(s->irq); 304 } 305 } 306 307 static void exynos4210_uart_update_parameters(Exynos4210UartState *s) 308 { 309 int speed, parity, data_bits, stop_bits, frame_size; 310 QEMUSerialSetParams ssp; 311 uint64_t uclk_rate; 312 313 if (s->reg[I_(UBRDIV)] == 0) { 314 return; 315 } 316 317 frame_size = 1; /* start bit */ 318 if (s->reg[I_(ULCON)] & 0x20) { 319 frame_size++; /* parity bit */ 320 if (s->reg[I_(ULCON)] & 0x28) { 321 parity = 'E'; 322 } else { 323 parity = 'O'; 324 } 325 } else { 326 parity = 'N'; 327 } 328 329 if (s->reg[I_(ULCON)] & 0x4) { 330 stop_bits = 2; 331 } else { 332 stop_bits = 1; 333 } 334 335 data_bits = (s->reg[I_(ULCON)] & 0x3) + 5; 336 337 frame_size += data_bits + stop_bits; 338 339 uclk_rate = 24000000; 340 341 speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) + 342 (s->reg[I_(UFRACVAL)] & 0x7) + 16); 343 344 ssp.speed = speed; 345 ssp.parity = parity; 346 ssp.data_bits = data_bits; 347 ssp.stop_bits = stop_bits; 348 349 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 350 351 PRINT_DEBUG("UART%d: speed: %d, parity: %c, data: %d, stop: %d\n", 352 s->channel, speed, parity, data_bits, stop_bits); 353 } 354 355 static void exynos4210_uart_write(void *opaque, hwaddr offset, 356 uint64_t val, unsigned size) 357 { 358 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 359 uint8_t ch; 360 361 PRINT_DEBUG_EXTEND("UART%d: <0x%04x> %s <- 0x%08llx\n", s->channel, 362 offset, exynos4210_uart_regname(offset), (long long unsigned int)val); 363 364 switch (offset) { 365 case ULCON: 366 case UBRDIV: 367 case UFRACVAL: 368 s->reg[I_(offset)] = val; 369 exynos4210_uart_update_parameters(s); 370 break; 371 case UFCON: 372 s->reg[I_(UFCON)] = val; 373 if (val & UFCON_Rx_FIFO_RESET) { 374 fifo_reset(&s->rx); 375 s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET; 376 PRINT_DEBUG("UART%d: Rx FIFO Reset\n", s->channel); 377 } 378 if (val & UFCON_Tx_FIFO_RESET) { 379 fifo_reset(&s->tx); 380 s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET; 381 PRINT_DEBUG("UART%d: Tx FIFO Reset\n", s->channel); 382 } 383 break; 384 385 case UTXH: 386 if (qemu_chr_fe_get_driver(&s->chr)) { 387 s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY | 388 UTRSTAT_Tx_BUFFER_EMPTY); 389 ch = (uint8_t)val; 390 /* XXX this blocks entire thread. Rewrite to use 391 * qemu_chr_fe_write and background I/O callbacks */ 392 qemu_chr_fe_write_all(&s->chr, &ch, 1); 393 #if DEBUG_Tx_DATA 394 fprintf(stderr, "%c", ch); 395 #endif 396 s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY | 397 UTRSTAT_Tx_BUFFER_EMPTY; 398 s->reg[I_(UINTSP)] |= UINTSP_TXD; 399 exynos4210_uart_update_irq(s); 400 } 401 break; 402 403 case UINTP: 404 s->reg[I_(UINTP)] &= ~val; 405 s->reg[I_(UINTSP)] &= ~val; 406 PRINT_DEBUG("UART%d: UINTP [%04x] have been cleared: %08x\n", 407 s->channel, offset, s->reg[I_(UINTP)]); 408 exynos4210_uart_update_irq(s); 409 break; 410 case UTRSTAT: 411 case UERSTAT: 412 case UFSTAT: 413 case UMSTAT: 414 case URXH: 415 PRINT_DEBUG("UART%d: Trying to write into RO register: %s [%04x]\n", 416 s->channel, exynos4210_uart_regname(offset), offset); 417 break; 418 case UINTSP: 419 s->reg[I_(UINTSP)] &= ~val; 420 break; 421 case UINTM: 422 s->reg[I_(UINTM)] = val; 423 exynos4210_uart_update_irq(s); 424 break; 425 case UCON: 426 case UMCON: 427 default: 428 s->reg[I_(offset)] = val; 429 break; 430 } 431 } 432 static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset, 433 unsigned size) 434 { 435 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 436 uint32_t res; 437 438 switch (offset) { 439 case UERSTAT: /* Read Only */ 440 res = s->reg[I_(UERSTAT)]; 441 s->reg[I_(UERSTAT)] = 0; 442 return res; 443 case UFSTAT: /* Read Only */ 444 s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff; 445 if (fifo_empty_elements_number(&s->rx) == 0) { 446 s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL; 447 s->reg[I_(UFSTAT)] &= ~0xff; 448 } 449 return s->reg[I_(UFSTAT)]; 450 case URXH: 451 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 452 if (fifo_elements_number(&s->rx)) { 453 res = fifo_retrieve(&s->rx); 454 #if DEBUG_Rx_DATA 455 fprintf(stderr, "%c", res); 456 #endif 457 if (!fifo_elements_number(&s->rx)) { 458 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 459 } else { 460 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 461 } 462 } else { 463 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 464 exynos4210_uart_update_irq(s); 465 res = 0; 466 } 467 } else { 468 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 469 res = s->reg[I_(URXH)]; 470 } 471 return res; 472 case UTXH: 473 PRINT_DEBUG("UART%d: Trying to read from WO register: %s [%04x]\n", 474 s->channel, exynos4210_uart_regname(offset), offset); 475 break; 476 default: 477 return s->reg[I_(offset)]; 478 } 479 480 return 0; 481 } 482 483 static const MemoryRegionOps exynos4210_uart_ops = { 484 .read = exynos4210_uart_read, 485 .write = exynos4210_uart_write, 486 .endianness = DEVICE_NATIVE_ENDIAN, 487 .valid = { 488 .max_access_size = 4, 489 .unaligned = false 490 }, 491 }; 492 493 static int exynos4210_uart_can_receive(void *opaque) 494 { 495 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 496 497 return fifo_empty_elements_number(&s->rx); 498 } 499 500 501 static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size) 502 { 503 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 504 int i; 505 506 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 507 if (fifo_empty_elements_number(&s->rx) < size) { 508 for (i = 0; i < fifo_empty_elements_number(&s->rx); i++) { 509 fifo_store(&s->rx, buf[i]); 510 } 511 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 512 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 513 } else { 514 for (i = 0; i < size; i++) { 515 fifo_store(&s->rx, buf[i]); 516 } 517 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 518 } 519 /* XXX: Around here we maybe should check Rx trigger level */ 520 s->reg[I_(UINTSP)] |= UINTSP_RXD; 521 } else { 522 s->reg[I_(URXH)] = buf[0]; 523 s->reg[I_(UINTSP)] |= UINTSP_RXD; 524 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 525 } 526 527 exynos4210_uart_update_irq(s); 528 } 529 530 531 static void exynos4210_uart_event(void *opaque, int event) 532 { 533 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 534 535 if (event == CHR_EVENT_BREAK) { 536 /* When the RxDn is held in logic 0, then a null byte is pushed into the 537 * fifo */ 538 fifo_store(&s->rx, '\0'); 539 s->reg[I_(UERSTAT)] |= UERSTAT_BREAK; 540 exynos4210_uart_update_irq(s); 541 } 542 } 543 544 545 static void exynos4210_uart_reset(DeviceState *dev) 546 { 547 Exynos4210UartState *s = EXYNOS4210_UART(dev); 548 int i; 549 550 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { 551 s->reg[I_(exynos4210_uart_regs[i].offset)] = 552 exynos4210_uart_regs[i].reset_value; 553 } 554 555 fifo_reset(&s->rx); 556 fifo_reset(&s->tx); 557 558 PRINT_DEBUG("UART%d: Rx FIFO size: %d\n", s->channel, s->rx.size); 559 } 560 561 static const VMStateDescription vmstate_exynos4210_uart_fifo = { 562 .name = "exynos4210.uart.fifo", 563 .version_id = 1, 564 .minimum_version_id = 1, 565 .fields = (VMStateField[]) { 566 VMSTATE_UINT32(sp, Exynos4210UartFIFO), 567 VMSTATE_UINT32(rp, Exynos4210UartFIFO), 568 VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, 0, size), 569 VMSTATE_END_OF_LIST() 570 } 571 }; 572 573 static const VMStateDescription vmstate_exynos4210_uart = { 574 .name = "exynos4210.uart", 575 .version_id = 1, 576 .minimum_version_id = 1, 577 .fields = (VMStateField[]) { 578 VMSTATE_STRUCT(rx, Exynos4210UartState, 1, 579 vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO), 580 VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState, 581 EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)), 582 VMSTATE_END_OF_LIST() 583 } 584 }; 585 586 DeviceState *exynos4210_uart_create(hwaddr addr, 587 int fifo_size, 588 int channel, 589 CharDriverState *chr, 590 qemu_irq irq) 591 { 592 DeviceState *dev; 593 SysBusDevice *bus; 594 595 const char chr_name[] = "serial"; 596 char label[ARRAY_SIZE(chr_name) + 1]; 597 598 dev = qdev_create(NULL, TYPE_EXYNOS4210_UART); 599 600 if (!chr) { 601 if (channel >= MAX_SERIAL_PORTS) { 602 error_report("Only %d serial ports are supported by QEMU", 603 MAX_SERIAL_PORTS); 604 exit(1); 605 } 606 chr = serial_hds[channel]; 607 if (!chr) { 608 snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, channel); 609 chr = qemu_chr_new(label, "null"); 610 if (!(chr)) { 611 error_report("Can't assign serial port to UART%d", channel); 612 exit(1); 613 } 614 } 615 } 616 617 qdev_prop_set_chr(dev, "chardev", chr); 618 qdev_prop_set_uint32(dev, "channel", channel); 619 qdev_prop_set_uint32(dev, "rx-size", fifo_size); 620 qdev_prop_set_uint32(dev, "tx-size", fifo_size); 621 622 bus = SYS_BUS_DEVICE(dev); 623 qdev_init_nofail(dev); 624 if (addr != (hwaddr)-1) { 625 sysbus_mmio_map(bus, 0, addr); 626 } 627 sysbus_connect_irq(bus, 0, irq); 628 629 return dev; 630 } 631 632 static int exynos4210_uart_init(SysBusDevice *dev) 633 { 634 Exynos4210UartState *s = EXYNOS4210_UART(dev); 635 636 /* memory mapping */ 637 memory_region_init_io(&s->iomem, OBJECT(s), &exynos4210_uart_ops, s, 638 "exynos4210.uart", EXYNOS4210_UART_REGS_MEM_SIZE); 639 sysbus_init_mmio(dev, &s->iomem); 640 641 sysbus_init_irq(dev, &s->irq); 642 643 qemu_chr_fe_set_handlers(&s->chr, exynos4210_uart_can_receive, 644 exynos4210_uart_receive, exynos4210_uart_event, 645 s, NULL, true); 646 647 return 0; 648 } 649 650 static Property exynos4210_uart_properties[] = { 651 DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr), 652 DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0), 653 DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16), 654 DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16), 655 DEFINE_PROP_END_OF_LIST(), 656 }; 657 658 static void exynos4210_uart_class_init(ObjectClass *klass, void *data) 659 { 660 DeviceClass *dc = DEVICE_CLASS(klass); 661 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 662 663 k->init = exynos4210_uart_init; 664 dc->reset = exynos4210_uart_reset; 665 dc->props = exynos4210_uart_properties; 666 dc->vmsd = &vmstate_exynos4210_uart; 667 } 668 669 static const TypeInfo exynos4210_uart_info = { 670 .name = TYPE_EXYNOS4210_UART, 671 .parent = TYPE_SYS_BUS_DEVICE, 672 .instance_size = sizeof(Exynos4210UartState), 673 .class_init = exynos4210_uart_class_init, 674 }; 675 676 static void exynos4210_uart_register(void) 677 { 678 type_register_static(&exynos4210_uart_info); 679 } 680 681 type_init(exynos4210_uart_register) 682