1 /* 2 * Exynos4210 UART Emulation 3 * 4 * Copyright (C) 2011 Samsung Electronics Co Ltd. 5 * Maksim Kozlov, <m.kozlov@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 15 * for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 * 20 */ 21 22 #include "qemu/osdep.h" 23 #include "hw/sysbus.h" 24 #include "qemu/error-report.h" 25 #include "sysemu/sysemu.h" 26 #include "sysemu/char.h" 27 28 #include "hw/arm/exynos4210.h" 29 30 #undef DEBUG_UART 31 #undef DEBUG_UART_EXTEND 32 #undef DEBUG_IRQ 33 #undef DEBUG_Rx_DATA 34 #undef DEBUG_Tx_DATA 35 36 #define DEBUG_UART 0 37 #define DEBUG_UART_EXTEND 0 38 #define DEBUG_IRQ 0 39 #define DEBUG_Rx_DATA 0 40 #define DEBUG_Tx_DATA 0 41 42 #if DEBUG_UART 43 #define PRINT_DEBUG(fmt, args...) \ 44 do { \ 45 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 46 } while (0) 47 48 #if DEBUG_UART_EXTEND 49 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 50 do { \ 51 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 52 } while (0) 53 #else 54 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 55 do {} while (0) 56 #endif /* EXTEND */ 57 58 #else 59 #define PRINT_DEBUG(fmt, args...) \ 60 do {} while (0) 61 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 62 do {} while (0) 63 #endif 64 65 #define PRINT_ERROR(fmt, args...) \ 66 do { \ 67 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 68 } while (0) 69 70 /* 71 * Offsets for UART registers relative to SFR base address 72 * for UARTn 73 * 74 */ 75 #define ULCON 0x0000 /* Line Control */ 76 #define UCON 0x0004 /* Control */ 77 #define UFCON 0x0008 /* FIFO Control */ 78 #define UMCON 0x000C /* Modem Control */ 79 #define UTRSTAT 0x0010 /* Tx/Rx Status */ 80 #define UERSTAT 0x0014 /* UART Error Status */ 81 #define UFSTAT 0x0018 /* FIFO Status */ 82 #define UMSTAT 0x001C /* Modem Status */ 83 #define UTXH 0x0020 /* Transmit Buffer */ 84 #define URXH 0x0024 /* Receive Buffer */ 85 #define UBRDIV 0x0028 /* Baud Rate Divisor */ 86 #define UFRACVAL 0x002C /* Divisor Fractional Value */ 87 #define UINTP 0x0030 /* Interrupt Pending */ 88 #define UINTSP 0x0034 /* Interrupt Source Pending */ 89 #define UINTM 0x0038 /* Interrupt Mask */ 90 91 /* 92 * for indexing register in the uint32_t array 93 * 94 * 'reg' - register offset (see offsets definitions above) 95 * 96 */ 97 #define I_(reg) (reg / sizeof(uint32_t)) 98 99 typedef struct Exynos4210UartReg { 100 const char *name; /* the only reason is the debug output */ 101 hwaddr offset; 102 uint32_t reset_value; 103 } Exynos4210UartReg; 104 105 static const Exynos4210UartReg exynos4210_uart_regs[] = { 106 {"ULCON", ULCON, 0x00000000}, 107 {"UCON", UCON, 0x00003000}, 108 {"UFCON", UFCON, 0x00000000}, 109 {"UMCON", UMCON, 0x00000000}, 110 {"UTRSTAT", UTRSTAT, 0x00000006}, /* RO */ 111 {"UERSTAT", UERSTAT, 0x00000000}, /* RO */ 112 {"UFSTAT", UFSTAT, 0x00000000}, /* RO */ 113 {"UMSTAT", UMSTAT, 0x00000000}, /* RO */ 114 {"UTXH", UTXH, 0x5c5c5c5c}, /* WO, undefined reset value*/ 115 {"URXH", URXH, 0x00000000}, /* RO */ 116 {"UBRDIV", UBRDIV, 0x00000000}, 117 {"UFRACVAL", UFRACVAL, 0x00000000}, 118 {"UINTP", UINTP, 0x00000000}, 119 {"UINTSP", UINTSP, 0x00000000}, 120 {"UINTM", UINTM, 0x00000000}, 121 }; 122 123 #define EXYNOS4210_UART_REGS_MEM_SIZE 0x3C 124 125 /* UART FIFO Control */ 126 #define UFCON_FIFO_ENABLE 0x1 127 #define UFCON_Rx_FIFO_RESET 0x2 128 #define UFCON_Tx_FIFO_RESET 0x4 129 #define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT 8 130 #define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT) 131 #define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT 4 132 #define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT) 133 134 /* Uart FIFO Status */ 135 #define UFSTAT_Rx_FIFO_COUNT 0xff 136 #define UFSTAT_Rx_FIFO_FULL 0x100 137 #define UFSTAT_Rx_FIFO_ERROR 0x200 138 #define UFSTAT_Tx_FIFO_COUNT_SHIFT 16 139 #define UFSTAT_Tx_FIFO_COUNT (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT) 140 #define UFSTAT_Tx_FIFO_FULL_SHIFT 24 141 #define UFSTAT_Tx_FIFO_FULL (1 << UFSTAT_Tx_FIFO_FULL_SHIFT) 142 143 /* UART Interrupt Source Pending */ 144 #define UINTSP_RXD 0x1 /* Receive interrupt */ 145 #define UINTSP_ERROR 0x2 /* Error interrupt */ 146 #define UINTSP_TXD 0x4 /* Transmit interrupt */ 147 #define UINTSP_MODEM 0x8 /* Modem interrupt */ 148 149 /* UART Line Control */ 150 #define ULCON_IR_MODE_SHIFT 6 151 #define ULCON_PARITY_SHIFT 3 152 #define ULCON_STOP_BIT_SHIFT 1 153 154 /* UART Tx/Rx Status */ 155 #define UTRSTAT_TRANSMITTER_EMPTY 0x4 156 #define UTRSTAT_Tx_BUFFER_EMPTY 0x2 157 #define UTRSTAT_Rx_BUFFER_DATA_READY 0x1 158 159 /* UART Error Status */ 160 #define UERSTAT_OVERRUN 0x1 161 #define UERSTAT_PARITY 0x2 162 #define UERSTAT_FRAME 0x4 163 #define UERSTAT_BREAK 0x8 164 165 typedef struct { 166 uint8_t *data; 167 uint32_t sp, rp; /* store and retrieve pointers */ 168 uint32_t size; 169 } Exynos4210UartFIFO; 170 171 #define TYPE_EXYNOS4210_UART "exynos4210.uart" 172 #define EXYNOS4210_UART(obj) \ 173 OBJECT_CHECK(Exynos4210UartState, (obj), TYPE_EXYNOS4210_UART) 174 175 typedef struct Exynos4210UartState { 176 SysBusDevice parent_obj; 177 178 MemoryRegion iomem; 179 180 uint32_t reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)]; 181 Exynos4210UartFIFO rx; 182 Exynos4210UartFIFO tx; 183 184 CharBackend chr; 185 qemu_irq irq; 186 187 uint32_t channel; 188 189 } Exynos4210UartState; 190 191 192 #if DEBUG_UART 193 /* Used only for debugging inside PRINT_DEBUG_... macros */ 194 static const char *exynos4210_uart_regname(hwaddr offset) 195 { 196 197 int i; 198 199 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { 200 if (offset == exynos4210_uart_regs[i].offset) { 201 return exynos4210_uart_regs[i].name; 202 } 203 } 204 205 return NULL; 206 } 207 #endif 208 209 210 static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch) 211 { 212 q->data[q->sp] = ch; 213 q->sp = (q->sp + 1) % q->size; 214 } 215 216 static uint8_t fifo_retrieve(Exynos4210UartFIFO *q) 217 { 218 uint8_t ret = q->data[q->rp]; 219 q->rp = (q->rp + 1) % q->size; 220 return ret; 221 } 222 223 static int fifo_elements_number(const Exynos4210UartFIFO *q) 224 { 225 if (q->sp < q->rp) { 226 return q->size - q->rp + q->sp; 227 } 228 229 return q->sp - q->rp; 230 } 231 232 static int fifo_empty_elements_number(const Exynos4210UartFIFO *q) 233 { 234 return q->size - fifo_elements_number(q); 235 } 236 237 static void fifo_reset(Exynos4210UartFIFO *q) 238 { 239 g_free(q->data); 240 q->data = NULL; 241 242 q->data = (uint8_t *)g_malloc0(q->size); 243 244 q->sp = 0; 245 q->rp = 0; 246 } 247 248 static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState *s) 249 { 250 uint32_t level = 0; 251 uint32_t reg; 252 253 reg = (s->reg[I_(UFCON)] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >> 254 UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT; 255 256 switch (s->channel) { 257 case 0: 258 level = reg * 32; 259 break; 260 case 1: 261 case 4: 262 level = reg * 8; 263 break; 264 case 2: 265 case 3: 266 level = reg * 2; 267 break; 268 default: 269 level = 0; 270 PRINT_ERROR("Wrong UART channel number: %d\n", s->channel); 271 } 272 273 return level; 274 } 275 276 static void exynos4210_uart_update_irq(Exynos4210UartState *s) 277 { 278 /* 279 * The Tx interrupt is always requested if the number of data in the 280 * transmit FIFO is smaller than the trigger level. 281 */ 282 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 283 284 uint32_t count = (s->reg[I_(UFSTAT)] & UFSTAT_Tx_FIFO_COUNT) >> 285 UFSTAT_Tx_FIFO_COUNT_SHIFT; 286 287 if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) { 288 s->reg[I_(UINTSP)] |= UINTSP_TXD; 289 } 290 } 291 292 s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)]; 293 294 if (s->reg[I_(UINTP)]) { 295 qemu_irq_raise(s->irq); 296 297 #if DEBUG_IRQ 298 fprintf(stderr, "UART%d: IRQ has been raised: %08x\n", 299 s->channel, s->reg[I_(UINTP)]); 300 #endif 301 302 } else { 303 qemu_irq_lower(s->irq); 304 } 305 } 306 307 static void exynos4210_uart_update_parameters(Exynos4210UartState *s) 308 { 309 int speed, parity, data_bits, stop_bits; 310 QEMUSerialSetParams ssp; 311 uint64_t uclk_rate; 312 313 if (s->reg[I_(UBRDIV)] == 0) { 314 return; 315 } 316 317 if (s->reg[I_(ULCON)] & 0x20) { 318 if (s->reg[I_(ULCON)] & 0x28) { 319 parity = 'E'; 320 } else { 321 parity = 'O'; 322 } 323 } else { 324 parity = 'N'; 325 } 326 327 if (s->reg[I_(ULCON)] & 0x4) { 328 stop_bits = 2; 329 } else { 330 stop_bits = 1; 331 } 332 333 data_bits = (s->reg[I_(ULCON)] & 0x3) + 5; 334 335 uclk_rate = 24000000; 336 337 speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) + 338 (s->reg[I_(UFRACVAL)] & 0x7) + 16); 339 340 ssp.speed = speed; 341 ssp.parity = parity; 342 ssp.data_bits = data_bits; 343 ssp.stop_bits = stop_bits; 344 345 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 346 347 PRINT_DEBUG("UART%d: speed: %d, parity: %c, data: %d, stop: %d\n", 348 s->channel, speed, parity, data_bits, stop_bits); 349 } 350 351 static void exynos4210_uart_write(void *opaque, hwaddr offset, 352 uint64_t val, unsigned size) 353 { 354 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 355 uint8_t ch; 356 357 PRINT_DEBUG_EXTEND("UART%d: <0x%04x> %s <- 0x%08llx\n", s->channel, 358 offset, exynos4210_uart_regname(offset), (long long unsigned int)val); 359 360 switch (offset) { 361 case ULCON: 362 case UBRDIV: 363 case UFRACVAL: 364 s->reg[I_(offset)] = val; 365 exynos4210_uart_update_parameters(s); 366 break; 367 case UFCON: 368 s->reg[I_(UFCON)] = val; 369 if (val & UFCON_Rx_FIFO_RESET) { 370 fifo_reset(&s->rx); 371 s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET; 372 PRINT_DEBUG("UART%d: Rx FIFO Reset\n", s->channel); 373 } 374 if (val & UFCON_Tx_FIFO_RESET) { 375 fifo_reset(&s->tx); 376 s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET; 377 PRINT_DEBUG("UART%d: Tx FIFO Reset\n", s->channel); 378 } 379 break; 380 381 case UTXH: 382 if (qemu_chr_fe_get_driver(&s->chr)) { 383 s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY | 384 UTRSTAT_Tx_BUFFER_EMPTY); 385 ch = (uint8_t)val; 386 /* XXX this blocks entire thread. Rewrite to use 387 * qemu_chr_fe_write and background I/O callbacks */ 388 qemu_chr_fe_write_all(&s->chr, &ch, 1); 389 #if DEBUG_Tx_DATA 390 fprintf(stderr, "%c", ch); 391 #endif 392 s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY | 393 UTRSTAT_Tx_BUFFER_EMPTY; 394 s->reg[I_(UINTSP)] |= UINTSP_TXD; 395 exynos4210_uart_update_irq(s); 396 } 397 break; 398 399 case UINTP: 400 s->reg[I_(UINTP)] &= ~val; 401 s->reg[I_(UINTSP)] &= ~val; 402 PRINT_DEBUG("UART%d: UINTP [%04x] have been cleared: %08x\n", 403 s->channel, offset, s->reg[I_(UINTP)]); 404 exynos4210_uart_update_irq(s); 405 break; 406 case UTRSTAT: 407 case UERSTAT: 408 case UFSTAT: 409 case UMSTAT: 410 case URXH: 411 PRINT_DEBUG("UART%d: Trying to write into RO register: %s [%04x]\n", 412 s->channel, exynos4210_uart_regname(offset), offset); 413 break; 414 case UINTSP: 415 s->reg[I_(UINTSP)] &= ~val; 416 break; 417 case UINTM: 418 s->reg[I_(UINTM)] = val; 419 exynos4210_uart_update_irq(s); 420 break; 421 case UCON: 422 case UMCON: 423 default: 424 s->reg[I_(offset)] = val; 425 break; 426 } 427 } 428 static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset, 429 unsigned size) 430 { 431 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 432 uint32_t res; 433 434 switch (offset) { 435 case UERSTAT: /* Read Only */ 436 res = s->reg[I_(UERSTAT)]; 437 s->reg[I_(UERSTAT)] = 0; 438 return res; 439 case UFSTAT: /* Read Only */ 440 s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff; 441 if (fifo_empty_elements_number(&s->rx) == 0) { 442 s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL; 443 s->reg[I_(UFSTAT)] &= ~0xff; 444 } 445 return s->reg[I_(UFSTAT)]; 446 case URXH: 447 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 448 if (fifo_elements_number(&s->rx)) { 449 res = fifo_retrieve(&s->rx); 450 #if DEBUG_Rx_DATA 451 fprintf(stderr, "%c", res); 452 #endif 453 if (!fifo_elements_number(&s->rx)) { 454 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 455 } else { 456 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 457 } 458 } else { 459 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 460 exynos4210_uart_update_irq(s); 461 res = 0; 462 } 463 } else { 464 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 465 res = s->reg[I_(URXH)]; 466 } 467 return res; 468 case UTXH: 469 PRINT_DEBUG("UART%d: Trying to read from WO register: %s [%04x]\n", 470 s->channel, exynos4210_uart_regname(offset), offset); 471 break; 472 default: 473 return s->reg[I_(offset)]; 474 } 475 476 return 0; 477 } 478 479 static const MemoryRegionOps exynos4210_uart_ops = { 480 .read = exynos4210_uart_read, 481 .write = exynos4210_uart_write, 482 .endianness = DEVICE_NATIVE_ENDIAN, 483 .valid = { 484 .max_access_size = 4, 485 .unaligned = false 486 }, 487 }; 488 489 static int exynos4210_uart_can_receive(void *opaque) 490 { 491 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 492 493 return fifo_empty_elements_number(&s->rx); 494 } 495 496 497 static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size) 498 { 499 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 500 int i; 501 502 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 503 if (fifo_empty_elements_number(&s->rx) < size) { 504 for (i = 0; i < fifo_empty_elements_number(&s->rx); i++) { 505 fifo_store(&s->rx, buf[i]); 506 } 507 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 508 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 509 } else { 510 for (i = 0; i < size; i++) { 511 fifo_store(&s->rx, buf[i]); 512 } 513 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 514 } 515 /* XXX: Around here we maybe should check Rx trigger level */ 516 s->reg[I_(UINTSP)] |= UINTSP_RXD; 517 } else { 518 s->reg[I_(URXH)] = buf[0]; 519 s->reg[I_(UINTSP)] |= UINTSP_RXD; 520 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 521 } 522 523 exynos4210_uart_update_irq(s); 524 } 525 526 527 static void exynos4210_uart_event(void *opaque, int event) 528 { 529 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 530 531 if (event == CHR_EVENT_BREAK) { 532 /* When the RxDn is held in logic 0, then a null byte is pushed into the 533 * fifo */ 534 fifo_store(&s->rx, '\0'); 535 s->reg[I_(UERSTAT)] |= UERSTAT_BREAK; 536 exynos4210_uart_update_irq(s); 537 } 538 } 539 540 541 static void exynos4210_uart_reset(DeviceState *dev) 542 { 543 Exynos4210UartState *s = EXYNOS4210_UART(dev); 544 int i; 545 546 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { 547 s->reg[I_(exynos4210_uart_regs[i].offset)] = 548 exynos4210_uart_regs[i].reset_value; 549 } 550 551 fifo_reset(&s->rx); 552 fifo_reset(&s->tx); 553 554 PRINT_DEBUG("UART%d: Rx FIFO size: %d\n", s->channel, s->rx.size); 555 } 556 557 static const VMStateDescription vmstate_exynos4210_uart_fifo = { 558 .name = "exynos4210.uart.fifo", 559 .version_id = 1, 560 .minimum_version_id = 1, 561 .fields = (VMStateField[]) { 562 VMSTATE_UINT32(sp, Exynos4210UartFIFO), 563 VMSTATE_UINT32(rp, Exynos4210UartFIFO), 564 VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, size), 565 VMSTATE_END_OF_LIST() 566 } 567 }; 568 569 static const VMStateDescription vmstate_exynos4210_uart = { 570 .name = "exynos4210.uart", 571 .version_id = 1, 572 .minimum_version_id = 1, 573 .fields = (VMStateField[]) { 574 VMSTATE_STRUCT(rx, Exynos4210UartState, 1, 575 vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO), 576 VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState, 577 EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)), 578 VMSTATE_END_OF_LIST() 579 } 580 }; 581 582 DeviceState *exynos4210_uart_create(hwaddr addr, 583 int fifo_size, 584 int channel, 585 Chardev *chr, 586 qemu_irq irq) 587 { 588 DeviceState *dev; 589 SysBusDevice *bus; 590 591 const char chr_name[] = "serial"; 592 char label[ARRAY_SIZE(chr_name) + 1]; 593 594 dev = qdev_create(NULL, TYPE_EXYNOS4210_UART); 595 596 if (!chr) { 597 if (channel >= MAX_SERIAL_PORTS) { 598 error_report("Only %d serial ports are supported by QEMU", 599 MAX_SERIAL_PORTS); 600 exit(1); 601 } 602 chr = serial_hds[channel]; 603 if (!chr) { 604 snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, channel); 605 chr = qemu_chr_new(label, "null"); 606 if (!(chr)) { 607 error_report("Can't assign serial port to UART%d", channel); 608 exit(1); 609 } 610 } 611 } 612 613 qdev_prop_set_chr(dev, "chardev", chr); 614 qdev_prop_set_uint32(dev, "channel", channel); 615 qdev_prop_set_uint32(dev, "rx-size", fifo_size); 616 qdev_prop_set_uint32(dev, "tx-size", fifo_size); 617 618 bus = SYS_BUS_DEVICE(dev); 619 qdev_init_nofail(dev); 620 if (addr != (hwaddr)-1) { 621 sysbus_mmio_map(bus, 0, addr); 622 } 623 sysbus_connect_irq(bus, 0, irq); 624 625 return dev; 626 } 627 628 static void exynos4210_uart_init(Object *obj) 629 { 630 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 631 Exynos4210UartState *s = EXYNOS4210_UART(dev); 632 633 /* memory mapping */ 634 memory_region_init_io(&s->iomem, obj, &exynos4210_uart_ops, s, 635 "exynos4210.uart", EXYNOS4210_UART_REGS_MEM_SIZE); 636 sysbus_init_mmio(dev, &s->iomem); 637 638 sysbus_init_irq(dev, &s->irq); 639 } 640 641 static void exynos4210_uart_realize(DeviceState *dev, Error **errp) 642 { 643 Exynos4210UartState *s = EXYNOS4210_UART(dev); 644 645 qemu_chr_fe_set_handlers(&s->chr, exynos4210_uart_can_receive, 646 exynos4210_uart_receive, exynos4210_uart_event, 647 s, NULL, true); 648 } 649 650 static Property exynos4210_uart_properties[] = { 651 DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr), 652 DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0), 653 DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16), 654 DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16), 655 DEFINE_PROP_END_OF_LIST(), 656 }; 657 658 static void exynos4210_uart_class_init(ObjectClass *klass, void *data) 659 { 660 DeviceClass *dc = DEVICE_CLASS(klass); 661 662 dc->realize = exynos4210_uart_realize; 663 dc->reset = exynos4210_uart_reset; 664 dc->props = exynos4210_uart_properties; 665 dc->vmsd = &vmstate_exynos4210_uart; 666 } 667 668 static const TypeInfo exynos4210_uart_info = { 669 .name = TYPE_EXYNOS4210_UART, 670 .parent = TYPE_SYS_BUS_DEVICE, 671 .instance_size = sizeof(Exynos4210UartState), 672 .instance_init = exynos4210_uart_init, 673 .class_init = exynos4210_uart_class_init, 674 }; 675 676 static void exynos4210_uart_register(void) 677 { 678 type_register_static(&exynos4210_uart_info); 679 } 680 681 type_init(exynos4210_uart_register) 682