1 /* 2 * Exynos4210 UART Emulation 3 * 4 * Copyright (C) 2011 Samsung Electronics Co Ltd. 5 * Maksim Kozlov, <m.kozlov@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 15 * for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 * 20 */ 21 22 #include "qemu/osdep.h" 23 #include "hw/sysbus.h" 24 #include "migration/vmstate.h" 25 #include "qemu/error-report.h" 26 #include "qemu/module.h" 27 #include "qemu/timer.h" 28 #include "chardev/char-fe.h" 29 #include "chardev/char-serial.h" 30 31 #include "hw/arm/exynos4210.h" 32 #include "hw/irq.h" 33 #include "hw/qdev-properties.h" 34 35 #include "trace.h" 36 37 /* 38 * Offsets for UART registers relative to SFR base address 39 * for UARTn 40 * 41 */ 42 #define ULCON 0x0000 /* Line Control */ 43 #define UCON 0x0004 /* Control */ 44 #define UFCON 0x0008 /* FIFO Control */ 45 #define UMCON 0x000C /* Modem Control */ 46 #define UTRSTAT 0x0010 /* Tx/Rx Status */ 47 #define UERSTAT 0x0014 /* UART Error Status */ 48 #define UFSTAT 0x0018 /* FIFO Status */ 49 #define UMSTAT 0x001C /* Modem Status */ 50 #define UTXH 0x0020 /* Transmit Buffer */ 51 #define URXH 0x0024 /* Receive Buffer */ 52 #define UBRDIV 0x0028 /* Baud Rate Divisor */ 53 #define UFRACVAL 0x002C /* Divisor Fractional Value */ 54 #define UINTP 0x0030 /* Interrupt Pending */ 55 #define UINTSP 0x0034 /* Interrupt Source Pending */ 56 #define UINTM 0x0038 /* Interrupt Mask */ 57 58 /* 59 * for indexing register in the uint32_t array 60 * 61 * 'reg' - register offset (see offsets definitions above) 62 * 63 */ 64 #define I_(reg) (reg / sizeof(uint32_t)) 65 66 typedef struct Exynos4210UartReg { 67 const char *name; /* the only reason is the debug output */ 68 hwaddr offset; 69 uint32_t reset_value; 70 } Exynos4210UartReg; 71 72 static const Exynos4210UartReg exynos4210_uart_regs[] = { 73 {"ULCON", ULCON, 0x00000000}, 74 {"UCON", UCON, 0x00003000}, 75 {"UFCON", UFCON, 0x00000000}, 76 {"UMCON", UMCON, 0x00000000}, 77 {"UTRSTAT", UTRSTAT, 0x00000006}, /* RO */ 78 {"UERSTAT", UERSTAT, 0x00000000}, /* RO */ 79 {"UFSTAT", UFSTAT, 0x00000000}, /* RO */ 80 {"UMSTAT", UMSTAT, 0x00000000}, /* RO */ 81 {"UTXH", UTXH, 0x5c5c5c5c}, /* WO, undefined reset value*/ 82 {"URXH", URXH, 0x00000000}, /* RO */ 83 {"UBRDIV", UBRDIV, 0x00000000}, 84 {"UFRACVAL", UFRACVAL, 0x00000000}, 85 {"UINTP", UINTP, 0x00000000}, 86 {"UINTSP", UINTSP, 0x00000000}, 87 {"UINTM", UINTM, 0x00000000}, 88 }; 89 90 #define EXYNOS4210_UART_REGS_MEM_SIZE 0x3C 91 92 /* UART FIFO Control */ 93 #define UFCON_FIFO_ENABLE 0x1 94 #define UFCON_Rx_FIFO_RESET 0x2 95 #define UFCON_Tx_FIFO_RESET 0x4 96 #define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT 8 97 #define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT) 98 #define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT 4 99 #define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT) 100 101 /* Uart FIFO Status */ 102 #define UFSTAT_Rx_FIFO_COUNT 0xff 103 #define UFSTAT_Rx_FIFO_FULL 0x100 104 #define UFSTAT_Rx_FIFO_ERROR 0x200 105 #define UFSTAT_Tx_FIFO_COUNT_SHIFT 16 106 #define UFSTAT_Tx_FIFO_COUNT (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT) 107 #define UFSTAT_Tx_FIFO_FULL_SHIFT 24 108 #define UFSTAT_Tx_FIFO_FULL (1 << UFSTAT_Tx_FIFO_FULL_SHIFT) 109 110 /* UART Interrupt Source Pending */ 111 #define UINTSP_RXD 0x1 /* Receive interrupt */ 112 #define UINTSP_ERROR 0x2 /* Error interrupt */ 113 #define UINTSP_TXD 0x4 /* Transmit interrupt */ 114 #define UINTSP_MODEM 0x8 /* Modem interrupt */ 115 116 /* UART Line Control */ 117 #define ULCON_IR_MODE_SHIFT 6 118 #define ULCON_PARITY_SHIFT 3 119 #define ULCON_STOP_BIT_SHIFT 1 120 121 /* UART Tx/Rx Status */ 122 #define UTRSTAT_Rx_TIMEOUT 0x8 123 #define UTRSTAT_TRANSMITTER_EMPTY 0x4 124 #define UTRSTAT_Tx_BUFFER_EMPTY 0x2 125 #define UTRSTAT_Rx_BUFFER_DATA_READY 0x1 126 127 /* UART Error Status */ 128 #define UERSTAT_OVERRUN 0x1 129 #define UERSTAT_PARITY 0x2 130 #define UERSTAT_FRAME 0x4 131 #define UERSTAT_BREAK 0x8 132 133 typedef struct { 134 uint8_t *data; 135 uint32_t sp, rp; /* store and retrieve pointers */ 136 uint32_t size; 137 } Exynos4210UartFIFO; 138 139 #define TYPE_EXYNOS4210_UART "exynos4210.uart" 140 #define EXYNOS4210_UART(obj) \ 141 OBJECT_CHECK(Exynos4210UartState, (obj), TYPE_EXYNOS4210_UART) 142 143 typedef struct Exynos4210UartState { 144 SysBusDevice parent_obj; 145 146 MemoryRegion iomem; 147 148 uint32_t reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)]; 149 Exynos4210UartFIFO rx; 150 Exynos4210UartFIFO tx; 151 152 QEMUTimer *fifo_timeout_timer; 153 uint64_t wordtime; /* word time in ns */ 154 155 CharBackend chr; 156 qemu_irq irq; 157 qemu_irq dmairq; 158 159 uint32_t channel; 160 161 } Exynos4210UartState; 162 163 164 /* Used only for tracing */ 165 static const char *exynos4210_uart_regname(hwaddr offset) 166 { 167 168 int i; 169 170 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { 171 if (offset == exynos4210_uart_regs[i].offset) { 172 return exynos4210_uart_regs[i].name; 173 } 174 } 175 176 return NULL; 177 } 178 179 180 static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch) 181 { 182 q->data[q->sp] = ch; 183 q->sp = (q->sp + 1) % q->size; 184 } 185 186 static uint8_t fifo_retrieve(Exynos4210UartFIFO *q) 187 { 188 uint8_t ret = q->data[q->rp]; 189 q->rp = (q->rp + 1) % q->size; 190 return ret; 191 } 192 193 static int fifo_elements_number(const Exynos4210UartFIFO *q) 194 { 195 if (q->sp < q->rp) { 196 return q->size - q->rp + q->sp; 197 } 198 199 return q->sp - q->rp; 200 } 201 202 static int fifo_empty_elements_number(const Exynos4210UartFIFO *q) 203 { 204 return q->size - fifo_elements_number(q); 205 } 206 207 static void fifo_reset(Exynos4210UartFIFO *q) 208 { 209 g_free(q->data); 210 q->data = NULL; 211 212 q->data = (uint8_t *)g_malloc0(q->size); 213 214 q->sp = 0; 215 q->rp = 0; 216 } 217 218 static uint32_t exynos4210_uart_FIFO_trigger_level(uint32_t channel, 219 uint32_t reg) 220 { 221 uint32_t level; 222 223 switch (channel) { 224 case 0: 225 level = reg * 32; 226 break; 227 case 1: 228 case 4: 229 level = reg * 8; 230 break; 231 case 2: 232 case 3: 233 level = reg * 2; 234 break; 235 default: 236 level = 0; 237 trace_exynos_uart_channel_error(channel); 238 break; 239 } 240 return level; 241 } 242 243 static uint32_t 244 exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState *s) 245 { 246 uint32_t reg; 247 248 reg = (s->reg[I_(UFCON)] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >> 249 UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT; 250 251 return exynos4210_uart_FIFO_trigger_level(s->channel, reg); 252 } 253 254 static uint32_t 255 exynos4210_uart_Rx_FIFO_trigger_level(const Exynos4210UartState *s) 256 { 257 uint32_t reg; 258 259 reg = ((s->reg[I_(UFCON)] & UFCON_Rx_FIFO_TRIGGER_LEVEL) >> 260 UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT) + 1; 261 262 return exynos4210_uart_FIFO_trigger_level(s->channel, reg); 263 } 264 265 /* 266 * Update Rx DMA busy signal if Rx DMA is enabled. For simplicity, 267 * mark DMA as busy if DMA is enabled and the receive buffer is empty. 268 */ 269 static void exynos4210_uart_update_dmabusy(Exynos4210UartState *s) 270 { 271 bool rx_dma_enabled = (s->reg[I_(UCON)] & 0x03) == 0x02; 272 uint32_t count = fifo_elements_number(&s->rx); 273 274 if (rx_dma_enabled && !count) { 275 qemu_irq_raise(s->dmairq); 276 trace_exynos_uart_dmabusy(s->channel); 277 } else { 278 qemu_irq_lower(s->dmairq); 279 trace_exynos_uart_dmaready(s->channel); 280 } 281 } 282 283 static void exynos4210_uart_update_irq(Exynos4210UartState *s) 284 { 285 /* 286 * The Tx interrupt is always requested if the number of data in the 287 * transmit FIFO is smaller than the trigger level. 288 */ 289 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 290 uint32_t count = (s->reg[I_(UFSTAT)] & UFSTAT_Tx_FIFO_COUNT) >> 291 UFSTAT_Tx_FIFO_COUNT_SHIFT; 292 293 if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) { 294 s->reg[I_(UINTSP)] |= UINTSP_TXD; 295 } 296 297 /* 298 * Rx interrupt if trigger level is reached or if rx timeout 299 * interrupt is disabled and there is data in the receive buffer 300 */ 301 count = fifo_elements_number(&s->rx); 302 if ((count && !(s->reg[I_(UCON)] & 0x80)) || 303 count >= exynos4210_uart_Rx_FIFO_trigger_level(s)) { 304 exynos4210_uart_update_dmabusy(s); 305 s->reg[I_(UINTSP)] |= UINTSP_RXD; 306 timer_del(s->fifo_timeout_timer); 307 } 308 } else if (s->reg[I_(UTRSTAT)] & UTRSTAT_Rx_BUFFER_DATA_READY) { 309 exynos4210_uart_update_dmabusy(s); 310 s->reg[I_(UINTSP)] |= UINTSP_RXD; 311 } 312 313 s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)]; 314 315 if (s->reg[I_(UINTP)]) { 316 qemu_irq_raise(s->irq); 317 trace_exynos_uart_irq_raised(s->channel, s->reg[I_(UINTP)]); 318 } else { 319 qemu_irq_lower(s->irq); 320 trace_exynos_uart_irq_lowered(s->channel); 321 } 322 } 323 324 static void exynos4210_uart_timeout_int(void *opaque) 325 { 326 Exynos4210UartState *s = opaque; 327 328 trace_exynos_uart_rx_timeout(s->channel, s->reg[I_(UTRSTAT)], 329 s->reg[I_(UINTSP)]); 330 331 if ((s->reg[I_(UTRSTAT)] & UTRSTAT_Rx_BUFFER_DATA_READY) || 332 (s->reg[I_(UCON)] & (1 << 11))) { 333 s->reg[I_(UINTSP)] |= UINTSP_RXD; 334 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_TIMEOUT; 335 exynos4210_uart_update_dmabusy(s); 336 exynos4210_uart_update_irq(s); 337 } 338 } 339 340 static void exynos4210_uart_update_parameters(Exynos4210UartState *s) 341 { 342 int speed, parity, data_bits, stop_bits; 343 QEMUSerialSetParams ssp; 344 uint64_t uclk_rate; 345 346 if (s->reg[I_(UBRDIV)] == 0) { 347 return; 348 } 349 350 if (s->reg[I_(ULCON)] & 0x20) { 351 if (s->reg[I_(ULCON)] & 0x28) { 352 parity = 'E'; 353 } else { 354 parity = 'O'; 355 } 356 } else { 357 parity = 'N'; 358 } 359 360 if (s->reg[I_(ULCON)] & 0x4) { 361 stop_bits = 2; 362 } else { 363 stop_bits = 1; 364 } 365 366 data_bits = (s->reg[I_(ULCON)] & 0x3) + 5; 367 368 uclk_rate = 24000000; 369 370 speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) + 371 (s->reg[I_(UFRACVAL)] & 0x7) + 16); 372 373 ssp.speed = speed; 374 ssp.parity = parity; 375 ssp.data_bits = data_bits; 376 ssp.stop_bits = stop_bits; 377 378 s->wordtime = NANOSECONDS_PER_SECOND * (data_bits + stop_bits + 1) / speed; 379 380 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 381 382 trace_exynos_uart_update_params( 383 s->channel, speed, parity, data_bits, stop_bits, s->wordtime); 384 } 385 386 static void exynos4210_uart_rx_timeout_set(Exynos4210UartState *s) 387 { 388 if (s->reg[I_(UCON)] & 0x80) { 389 uint32_t timeout = ((s->reg[I_(UCON)] >> 12) & 0x0f) * s->wordtime; 390 391 timer_mod(s->fifo_timeout_timer, 392 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + timeout); 393 } else { 394 timer_del(s->fifo_timeout_timer); 395 } 396 } 397 398 static void exynos4210_uart_write(void *opaque, hwaddr offset, 399 uint64_t val, unsigned size) 400 { 401 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 402 uint8_t ch; 403 404 trace_exynos_uart_write(s->channel, offset, 405 exynos4210_uart_regname(offset), val); 406 407 switch (offset) { 408 case ULCON: 409 case UBRDIV: 410 case UFRACVAL: 411 s->reg[I_(offset)] = val; 412 exynos4210_uart_update_parameters(s); 413 break; 414 case UFCON: 415 s->reg[I_(UFCON)] = val; 416 if (val & UFCON_Rx_FIFO_RESET) { 417 fifo_reset(&s->rx); 418 s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET; 419 trace_exynos_uart_rx_fifo_reset(s->channel); 420 } 421 if (val & UFCON_Tx_FIFO_RESET) { 422 fifo_reset(&s->tx); 423 s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET; 424 trace_exynos_uart_tx_fifo_reset(s->channel); 425 } 426 break; 427 428 case UTXH: 429 if (qemu_chr_fe_backend_connected(&s->chr)) { 430 s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY | 431 UTRSTAT_Tx_BUFFER_EMPTY); 432 ch = (uint8_t)val; 433 /* XXX this blocks entire thread. Rewrite to use 434 * qemu_chr_fe_write and background I/O callbacks */ 435 qemu_chr_fe_write_all(&s->chr, &ch, 1); 436 trace_exynos_uart_tx(s->channel, ch); 437 s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY | 438 UTRSTAT_Tx_BUFFER_EMPTY; 439 s->reg[I_(UINTSP)] |= UINTSP_TXD; 440 exynos4210_uart_update_irq(s); 441 } 442 break; 443 444 case UINTP: 445 s->reg[I_(UINTP)] &= ~val; 446 s->reg[I_(UINTSP)] &= ~val; 447 trace_exynos_uart_intclr(s->channel, s->reg[I_(UINTP)]); 448 exynos4210_uart_update_irq(s); 449 break; 450 case UTRSTAT: 451 if (val & UTRSTAT_Rx_TIMEOUT) { 452 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_TIMEOUT; 453 } 454 break; 455 case UERSTAT: 456 case UFSTAT: 457 case UMSTAT: 458 case URXH: 459 trace_exynos_uart_ro_write( 460 s->channel, exynos4210_uart_regname(offset), offset); 461 break; 462 case UINTSP: 463 s->reg[I_(UINTSP)] &= ~val; 464 break; 465 case UINTM: 466 s->reg[I_(UINTM)] = val; 467 exynos4210_uart_update_irq(s); 468 break; 469 case UCON: 470 case UMCON: 471 default: 472 s->reg[I_(offset)] = val; 473 break; 474 } 475 } 476 477 static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset, 478 unsigned size) 479 { 480 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 481 uint32_t res; 482 483 switch (offset) { 484 case UERSTAT: /* Read Only */ 485 res = s->reg[I_(UERSTAT)]; 486 s->reg[I_(UERSTAT)] = 0; 487 trace_exynos_uart_read(s->channel, offset, 488 exynos4210_uart_regname(offset), res); 489 return res; 490 case UFSTAT: /* Read Only */ 491 s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff; 492 if (fifo_empty_elements_number(&s->rx) == 0) { 493 s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL; 494 s->reg[I_(UFSTAT)] &= ~0xff; 495 } 496 trace_exynos_uart_read(s->channel, offset, 497 exynos4210_uart_regname(offset), 498 s->reg[I_(UFSTAT)]); 499 return s->reg[I_(UFSTAT)]; 500 case URXH: 501 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 502 if (fifo_elements_number(&s->rx)) { 503 res = fifo_retrieve(&s->rx); 504 trace_exynos_uart_rx(s->channel, res); 505 if (!fifo_elements_number(&s->rx)) { 506 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 507 } else { 508 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 509 } 510 } else { 511 trace_exynos_uart_rx_error(s->channel); 512 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 513 exynos4210_uart_update_irq(s); 514 res = 0; 515 } 516 } else { 517 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 518 res = s->reg[I_(URXH)]; 519 } 520 exynos4210_uart_update_dmabusy(s); 521 trace_exynos_uart_read(s->channel, offset, 522 exynos4210_uart_regname(offset), res); 523 return res; 524 case UTXH: 525 trace_exynos_uart_wo_read(s->channel, exynos4210_uart_regname(offset), 526 offset); 527 break; 528 default: 529 trace_exynos_uart_read(s->channel, offset, 530 exynos4210_uart_regname(offset), 531 s->reg[I_(offset)]); 532 return s->reg[I_(offset)]; 533 } 534 535 trace_exynos_uart_read(s->channel, offset, exynos4210_uart_regname(offset), 536 0); 537 return 0; 538 } 539 540 static const MemoryRegionOps exynos4210_uart_ops = { 541 .read = exynos4210_uart_read, 542 .write = exynos4210_uart_write, 543 .endianness = DEVICE_NATIVE_ENDIAN, 544 .valid = { 545 .max_access_size = 4, 546 .unaligned = false 547 }, 548 }; 549 550 static int exynos4210_uart_can_receive(void *opaque) 551 { 552 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 553 554 return fifo_empty_elements_number(&s->rx); 555 } 556 557 static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size) 558 { 559 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 560 int i; 561 562 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 563 if (fifo_empty_elements_number(&s->rx) < size) { 564 size = fifo_empty_elements_number(&s->rx); 565 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 566 } 567 for (i = 0; i < size; i++) { 568 fifo_store(&s->rx, buf[i]); 569 } 570 exynos4210_uart_rx_timeout_set(s); 571 } else { 572 s->reg[I_(URXH)] = buf[0]; 573 } 574 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 575 576 exynos4210_uart_update_irq(s); 577 } 578 579 580 static void exynos4210_uart_event(void *opaque, QEMUChrEvent event) 581 { 582 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 583 584 if (event == CHR_EVENT_BREAK) { 585 /* When the RxDn is held in logic 0, then a null byte is pushed into the 586 * fifo */ 587 fifo_store(&s->rx, '\0'); 588 s->reg[I_(UERSTAT)] |= UERSTAT_BREAK; 589 exynos4210_uart_update_irq(s); 590 } 591 } 592 593 594 static void exynos4210_uart_reset(DeviceState *dev) 595 { 596 Exynos4210UartState *s = EXYNOS4210_UART(dev); 597 int i; 598 599 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { 600 s->reg[I_(exynos4210_uart_regs[i].offset)] = 601 exynos4210_uart_regs[i].reset_value; 602 } 603 604 fifo_reset(&s->rx); 605 fifo_reset(&s->tx); 606 607 trace_exynos_uart_rxsize(s->channel, s->rx.size); 608 } 609 610 static int exynos4210_uart_post_load(void *opaque, int version_id) 611 { 612 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 613 614 exynos4210_uart_update_parameters(s); 615 exynos4210_uart_rx_timeout_set(s); 616 617 return 0; 618 } 619 620 static const VMStateDescription vmstate_exynos4210_uart_fifo = { 621 .name = "exynos4210.uart.fifo", 622 .version_id = 1, 623 .minimum_version_id = 1, 624 .post_load = exynos4210_uart_post_load, 625 .fields = (VMStateField[]) { 626 VMSTATE_UINT32(sp, Exynos4210UartFIFO), 627 VMSTATE_UINT32(rp, Exynos4210UartFIFO), 628 VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, size), 629 VMSTATE_END_OF_LIST() 630 } 631 }; 632 633 static const VMStateDescription vmstate_exynos4210_uart = { 634 .name = "exynos4210.uart", 635 .version_id = 1, 636 .minimum_version_id = 1, 637 .fields = (VMStateField[]) { 638 VMSTATE_STRUCT(rx, Exynos4210UartState, 1, 639 vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO), 640 VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState, 641 EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)), 642 VMSTATE_END_OF_LIST() 643 } 644 }; 645 646 DeviceState *exynos4210_uart_create(hwaddr addr, 647 int fifo_size, 648 int channel, 649 Chardev *chr, 650 qemu_irq irq) 651 { 652 DeviceState *dev; 653 SysBusDevice *bus; 654 655 dev = qdev_create(NULL, TYPE_EXYNOS4210_UART); 656 657 qdev_prop_set_chr(dev, "chardev", chr); 658 qdev_prop_set_uint32(dev, "channel", channel); 659 qdev_prop_set_uint32(dev, "rx-size", fifo_size); 660 qdev_prop_set_uint32(dev, "tx-size", fifo_size); 661 662 bus = SYS_BUS_DEVICE(dev); 663 qdev_init_nofail(dev); 664 if (addr != (hwaddr)-1) { 665 sysbus_mmio_map(bus, 0, addr); 666 } 667 sysbus_connect_irq(bus, 0, irq); 668 669 return dev; 670 } 671 672 static void exynos4210_uart_init(Object *obj) 673 { 674 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 675 Exynos4210UartState *s = EXYNOS4210_UART(dev); 676 677 s->wordtime = NANOSECONDS_PER_SECOND * 10 / 9600; 678 679 /* memory mapping */ 680 memory_region_init_io(&s->iomem, obj, &exynos4210_uart_ops, s, 681 "exynos4210.uart", EXYNOS4210_UART_REGS_MEM_SIZE); 682 sysbus_init_mmio(dev, &s->iomem); 683 684 sysbus_init_irq(dev, &s->irq); 685 sysbus_init_irq(dev, &s->dmairq); 686 } 687 688 static void exynos4210_uart_realize(DeviceState *dev, Error **errp) 689 { 690 Exynos4210UartState *s = EXYNOS4210_UART(dev); 691 692 s->fifo_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, 693 exynos4210_uart_timeout_int, s); 694 695 qemu_chr_fe_set_handlers(&s->chr, exynos4210_uart_can_receive, 696 exynos4210_uart_receive, exynos4210_uart_event, 697 NULL, s, NULL, true); 698 } 699 700 static Property exynos4210_uart_properties[] = { 701 DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr), 702 DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0), 703 DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16), 704 DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16), 705 DEFINE_PROP_END_OF_LIST(), 706 }; 707 708 static void exynos4210_uart_class_init(ObjectClass *klass, void *data) 709 { 710 DeviceClass *dc = DEVICE_CLASS(klass); 711 712 dc->realize = exynos4210_uart_realize; 713 dc->reset = exynos4210_uart_reset; 714 device_class_set_props(dc, exynos4210_uart_properties); 715 dc->vmsd = &vmstate_exynos4210_uart; 716 } 717 718 static const TypeInfo exynos4210_uart_info = { 719 .name = TYPE_EXYNOS4210_UART, 720 .parent = TYPE_SYS_BUS_DEVICE, 721 .instance_size = sizeof(Exynos4210UartState), 722 .instance_init = exynos4210_uart_init, 723 .class_init = exynos4210_uart_class_init, 724 }; 725 726 static void exynos4210_uart_register(void) 727 { 728 type_register_static(&exynos4210_uart_info); 729 } 730 731 type_init(exynos4210_uart_register) 732