1 /* 2 * Exynos4210 UART Emulation 3 * 4 * Copyright (C) 2011 Samsung Electronics Co Ltd. 5 * Maksim Kozlov, <m.kozlov@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 15 * for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 * 20 */ 21 22 #include "hw/sysbus.h" 23 #include "sysemu/sysemu.h" 24 #include "char/char.h" 25 26 #include "hw/arm/exynos4210.h" 27 28 #undef DEBUG_UART 29 #undef DEBUG_UART_EXTEND 30 #undef DEBUG_IRQ 31 #undef DEBUG_Rx_DATA 32 #undef DEBUG_Tx_DATA 33 34 #define DEBUG_UART 0 35 #define DEBUG_UART_EXTEND 0 36 #define DEBUG_IRQ 0 37 #define DEBUG_Rx_DATA 0 38 #define DEBUG_Tx_DATA 0 39 40 #if DEBUG_UART 41 #define PRINT_DEBUG(fmt, args...) \ 42 do { \ 43 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 44 } while (0) 45 46 #if DEBUG_UART_EXTEND 47 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 48 do { \ 49 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 50 } while (0) 51 #else 52 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 53 do {} while (0) 54 #endif /* EXTEND */ 55 56 #else 57 #define PRINT_DEBUG(fmt, args...) \ 58 do {} while (0) 59 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 60 do {} while (0) 61 #endif 62 63 #define PRINT_ERROR(fmt, args...) \ 64 do { \ 65 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 66 } while (0) 67 68 /* 69 * Offsets for UART registers relative to SFR base address 70 * for UARTn 71 * 72 */ 73 #define ULCON 0x0000 /* Line Control */ 74 #define UCON 0x0004 /* Control */ 75 #define UFCON 0x0008 /* FIFO Control */ 76 #define UMCON 0x000C /* Modem Control */ 77 #define UTRSTAT 0x0010 /* Tx/Rx Status */ 78 #define UERSTAT 0x0014 /* UART Error Status */ 79 #define UFSTAT 0x0018 /* FIFO Status */ 80 #define UMSTAT 0x001C /* Modem Status */ 81 #define UTXH 0x0020 /* Transmit Buffer */ 82 #define URXH 0x0024 /* Receive Buffer */ 83 #define UBRDIV 0x0028 /* Baud Rate Divisor */ 84 #define UFRACVAL 0x002C /* Divisor Fractional Value */ 85 #define UINTP 0x0030 /* Interrupt Pending */ 86 #define UINTSP 0x0034 /* Interrupt Source Pending */ 87 #define UINTM 0x0038 /* Interrupt Mask */ 88 89 /* 90 * for indexing register in the uint32_t array 91 * 92 * 'reg' - register offset (see offsets definitions above) 93 * 94 */ 95 #define I_(reg) (reg / sizeof(uint32_t)) 96 97 typedef struct Exynos4210UartReg { 98 const char *name; /* the only reason is the debug output */ 99 hwaddr offset; 100 uint32_t reset_value; 101 } Exynos4210UartReg; 102 103 static Exynos4210UartReg exynos4210_uart_regs[] = { 104 {"ULCON", ULCON, 0x00000000}, 105 {"UCON", UCON, 0x00003000}, 106 {"UFCON", UFCON, 0x00000000}, 107 {"UMCON", UMCON, 0x00000000}, 108 {"UTRSTAT", UTRSTAT, 0x00000006}, /* RO */ 109 {"UERSTAT", UERSTAT, 0x00000000}, /* RO */ 110 {"UFSTAT", UFSTAT, 0x00000000}, /* RO */ 111 {"UMSTAT", UMSTAT, 0x00000000}, /* RO */ 112 {"UTXH", UTXH, 0x5c5c5c5c}, /* WO, undefined reset value*/ 113 {"URXH", URXH, 0x00000000}, /* RO */ 114 {"UBRDIV", UBRDIV, 0x00000000}, 115 {"UFRACVAL", UFRACVAL, 0x00000000}, 116 {"UINTP", UINTP, 0x00000000}, 117 {"UINTSP", UINTSP, 0x00000000}, 118 {"UINTM", UINTM, 0x00000000}, 119 }; 120 121 #define EXYNOS4210_UART_REGS_MEM_SIZE 0x3C 122 123 /* UART FIFO Control */ 124 #define UFCON_FIFO_ENABLE 0x1 125 #define UFCON_Rx_FIFO_RESET 0x2 126 #define UFCON_Tx_FIFO_RESET 0x4 127 #define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT 8 128 #define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT) 129 #define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT 4 130 #define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT) 131 132 /* Uart FIFO Status */ 133 #define UFSTAT_Rx_FIFO_COUNT 0xff 134 #define UFSTAT_Rx_FIFO_FULL 0x100 135 #define UFSTAT_Rx_FIFO_ERROR 0x200 136 #define UFSTAT_Tx_FIFO_COUNT_SHIFT 16 137 #define UFSTAT_Tx_FIFO_COUNT (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT) 138 #define UFSTAT_Tx_FIFO_FULL_SHIFT 24 139 #define UFSTAT_Tx_FIFO_FULL (1 << UFSTAT_Tx_FIFO_FULL_SHIFT) 140 141 /* UART Interrupt Source Pending */ 142 #define UINTSP_RXD 0x1 /* Receive interrupt */ 143 #define UINTSP_ERROR 0x2 /* Error interrupt */ 144 #define UINTSP_TXD 0x4 /* Transmit interrupt */ 145 #define UINTSP_MODEM 0x8 /* Modem interrupt */ 146 147 /* UART Line Control */ 148 #define ULCON_IR_MODE_SHIFT 6 149 #define ULCON_PARITY_SHIFT 3 150 #define ULCON_STOP_BIT_SHIFT 1 151 152 /* UART Tx/Rx Status */ 153 #define UTRSTAT_TRANSMITTER_EMPTY 0x4 154 #define UTRSTAT_Tx_BUFFER_EMPTY 0x2 155 #define UTRSTAT_Rx_BUFFER_DATA_READY 0x1 156 157 /* UART Error Status */ 158 #define UERSTAT_OVERRUN 0x1 159 #define UERSTAT_PARITY 0x2 160 #define UERSTAT_FRAME 0x4 161 #define UERSTAT_BREAK 0x8 162 163 typedef struct { 164 uint8_t *data; 165 uint32_t sp, rp; /* store and retrieve pointers */ 166 uint32_t size; 167 } Exynos4210UartFIFO; 168 169 typedef struct { 170 SysBusDevice busdev; 171 MemoryRegion iomem; 172 173 uint32_t reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)]; 174 Exynos4210UartFIFO rx; 175 Exynos4210UartFIFO tx; 176 177 CharDriverState *chr; 178 qemu_irq irq; 179 180 uint32_t channel; 181 182 } Exynos4210UartState; 183 184 185 #if DEBUG_UART 186 /* Used only for debugging inside PRINT_DEBUG_... macros */ 187 static const char *exynos4210_uart_regname(hwaddr offset) 188 { 189 190 int regs_number = sizeof(exynos4210_uart_regs) / sizeof(Exynos4210UartReg); 191 int i; 192 193 for (i = 0; i < regs_number; i++) { 194 if (offset == exynos4210_uart_regs[i].offset) { 195 return exynos4210_uart_regs[i].name; 196 } 197 } 198 199 return NULL; 200 } 201 #endif 202 203 204 static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch) 205 { 206 q->data[q->sp] = ch; 207 q->sp = (q->sp + 1) % q->size; 208 } 209 210 static uint8_t fifo_retrieve(Exynos4210UartFIFO *q) 211 { 212 uint8_t ret = q->data[q->rp]; 213 q->rp = (q->rp + 1) % q->size; 214 return ret; 215 } 216 217 static int fifo_elements_number(Exynos4210UartFIFO *q) 218 { 219 if (q->sp < q->rp) { 220 return q->size - q->rp + q->sp; 221 } 222 223 return q->sp - q->rp; 224 } 225 226 static int fifo_empty_elements_number(Exynos4210UartFIFO *q) 227 { 228 return q->size - fifo_elements_number(q); 229 } 230 231 static void fifo_reset(Exynos4210UartFIFO *q) 232 { 233 if (q->data != NULL) { 234 g_free(q->data); 235 q->data = NULL; 236 } 237 238 q->data = (uint8_t *)g_malloc0(q->size); 239 240 q->sp = 0; 241 q->rp = 0; 242 } 243 244 static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(Exynos4210UartState *s) 245 { 246 uint32_t level = 0; 247 uint32_t reg; 248 249 reg = (s->reg[I_(UFCON)] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >> 250 UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT; 251 252 switch (s->channel) { 253 case 0: 254 level = reg * 32; 255 break; 256 case 1: 257 case 4: 258 level = reg * 8; 259 break; 260 case 2: 261 case 3: 262 level = reg * 2; 263 break; 264 default: 265 level = 0; 266 PRINT_ERROR("Wrong UART channel number: %d\n", s->channel); 267 } 268 269 return level; 270 } 271 272 static void exynos4210_uart_update_irq(Exynos4210UartState *s) 273 { 274 /* 275 * The Tx interrupt is always requested if the number of data in the 276 * transmit FIFO is smaller than the trigger level. 277 */ 278 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 279 280 uint32_t count = (s->reg[I_(UFSTAT)] & UFSTAT_Tx_FIFO_COUNT) >> 281 UFSTAT_Tx_FIFO_COUNT_SHIFT; 282 283 if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) { 284 s->reg[I_(UINTSP)] |= UINTSP_TXD; 285 } 286 } 287 288 s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)]; 289 290 if (s->reg[I_(UINTP)]) { 291 qemu_irq_raise(s->irq); 292 293 #if DEBUG_IRQ 294 fprintf(stderr, "UART%d: IRQ has been raised: %08x\n", 295 s->channel, s->reg[I_(UINTP)]); 296 #endif 297 298 } else { 299 qemu_irq_lower(s->irq); 300 } 301 } 302 303 static void exynos4210_uart_update_parameters(Exynos4210UartState *s) 304 { 305 int speed, parity, data_bits, stop_bits, frame_size; 306 QEMUSerialSetParams ssp; 307 uint64_t uclk_rate; 308 309 if (s->reg[I_(UBRDIV)] == 0) { 310 return; 311 } 312 313 frame_size = 1; /* start bit */ 314 if (s->reg[I_(ULCON)] & 0x20) { 315 frame_size++; /* parity bit */ 316 if (s->reg[I_(ULCON)] & 0x28) { 317 parity = 'E'; 318 } else { 319 parity = 'O'; 320 } 321 } else { 322 parity = 'N'; 323 } 324 325 if (s->reg[I_(ULCON)] & 0x4) { 326 stop_bits = 2; 327 } else { 328 stop_bits = 1; 329 } 330 331 data_bits = (s->reg[I_(ULCON)] & 0x3) + 5; 332 333 frame_size += data_bits + stop_bits; 334 335 uclk_rate = 24000000; 336 337 speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) + 338 (s->reg[I_(UFRACVAL)] & 0x7) + 16); 339 340 ssp.speed = speed; 341 ssp.parity = parity; 342 ssp.data_bits = data_bits; 343 ssp.stop_bits = stop_bits; 344 345 qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 346 347 PRINT_DEBUG("UART%d: speed: %d, parity: %c, data: %d, stop: %d\n", 348 s->channel, speed, parity, data_bits, stop_bits); 349 } 350 351 static void exynos4210_uart_write(void *opaque, hwaddr offset, 352 uint64_t val, unsigned size) 353 { 354 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 355 uint8_t ch; 356 357 PRINT_DEBUG_EXTEND("UART%d: <0x%04x> %s <- 0x%08llx\n", s->channel, 358 offset, exynos4210_uart_regname(offset), (long long unsigned int)val); 359 360 switch (offset) { 361 case ULCON: 362 case UBRDIV: 363 case UFRACVAL: 364 s->reg[I_(offset)] = val; 365 exynos4210_uart_update_parameters(s); 366 break; 367 case UFCON: 368 s->reg[I_(UFCON)] = val; 369 if (val & UFCON_Rx_FIFO_RESET) { 370 fifo_reset(&s->rx); 371 s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET; 372 PRINT_DEBUG("UART%d: Rx FIFO Reset\n", s->channel); 373 } 374 if (val & UFCON_Tx_FIFO_RESET) { 375 fifo_reset(&s->tx); 376 s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET; 377 PRINT_DEBUG("UART%d: Tx FIFO Reset\n", s->channel); 378 } 379 break; 380 381 case UTXH: 382 if (s->chr) { 383 s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY | 384 UTRSTAT_Tx_BUFFER_EMPTY); 385 ch = (uint8_t)val; 386 qemu_chr_fe_write(s->chr, &ch, 1); 387 #if DEBUG_Tx_DATA 388 fprintf(stderr, "%c", ch); 389 #endif 390 s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY | 391 UTRSTAT_Tx_BUFFER_EMPTY; 392 s->reg[I_(UINTSP)] |= UINTSP_TXD; 393 exynos4210_uart_update_irq(s); 394 } 395 break; 396 397 case UINTP: 398 s->reg[I_(UINTP)] &= ~val; 399 s->reg[I_(UINTSP)] &= ~val; 400 PRINT_DEBUG("UART%d: UINTP [%04x] have been cleared: %08x\n", 401 s->channel, offset, s->reg[I_(UINTP)]); 402 exynos4210_uart_update_irq(s); 403 break; 404 case UTRSTAT: 405 case UERSTAT: 406 case UFSTAT: 407 case UMSTAT: 408 case URXH: 409 PRINT_DEBUG("UART%d: Trying to write into RO register: %s [%04x]\n", 410 s->channel, exynos4210_uart_regname(offset), offset); 411 break; 412 case UINTSP: 413 s->reg[I_(UINTSP)] &= ~val; 414 break; 415 case UINTM: 416 s->reg[I_(UINTM)] = val; 417 exynos4210_uart_update_irq(s); 418 break; 419 case UCON: 420 case UMCON: 421 default: 422 s->reg[I_(offset)] = val; 423 break; 424 } 425 } 426 static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset, 427 unsigned size) 428 { 429 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 430 uint32_t res; 431 432 switch (offset) { 433 case UERSTAT: /* Read Only */ 434 res = s->reg[I_(UERSTAT)]; 435 s->reg[I_(UERSTAT)] = 0; 436 return res; 437 case UFSTAT: /* Read Only */ 438 s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff; 439 if (fifo_empty_elements_number(&s->rx) == 0) { 440 s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL; 441 s->reg[I_(UFSTAT)] &= ~0xff; 442 } 443 return s->reg[I_(UFSTAT)]; 444 case URXH: 445 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 446 if (fifo_elements_number(&s->rx)) { 447 res = fifo_retrieve(&s->rx); 448 #if DEBUG_Rx_DATA 449 fprintf(stderr, "%c", res); 450 #endif 451 if (!fifo_elements_number(&s->rx)) { 452 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 453 } else { 454 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 455 } 456 } else { 457 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 458 exynos4210_uart_update_irq(s); 459 res = 0; 460 } 461 } else { 462 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 463 res = s->reg[I_(URXH)]; 464 } 465 return res; 466 case UTXH: 467 PRINT_DEBUG("UART%d: Trying to read from WO register: %s [%04x]\n", 468 s->channel, exynos4210_uart_regname(offset), offset); 469 break; 470 default: 471 return s->reg[I_(offset)]; 472 } 473 474 return 0; 475 } 476 477 static const MemoryRegionOps exynos4210_uart_ops = { 478 .read = exynos4210_uart_read, 479 .write = exynos4210_uart_write, 480 .endianness = DEVICE_NATIVE_ENDIAN, 481 .valid = { 482 .max_access_size = 4, 483 .unaligned = false 484 }, 485 }; 486 487 static int exynos4210_uart_can_receive(void *opaque) 488 { 489 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 490 491 return fifo_empty_elements_number(&s->rx); 492 } 493 494 495 static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size) 496 { 497 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 498 int i; 499 500 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 501 if (fifo_empty_elements_number(&s->rx) < size) { 502 for (i = 0; i < fifo_empty_elements_number(&s->rx); i++) { 503 fifo_store(&s->rx, buf[i]); 504 } 505 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 506 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 507 } else { 508 for (i = 0; i < size; i++) { 509 fifo_store(&s->rx, buf[i]); 510 } 511 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 512 } 513 /* XXX: Around here we maybe should check Rx trigger level */ 514 s->reg[I_(UINTSP)] |= UINTSP_RXD; 515 } else { 516 s->reg[I_(URXH)] = buf[0]; 517 s->reg[I_(UINTSP)] |= UINTSP_RXD; 518 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 519 } 520 521 exynos4210_uart_update_irq(s); 522 } 523 524 525 static void exynos4210_uart_event(void *opaque, int event) 526 { 527 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 528 529 if (event == CHR_EVENT_BREAK) { 530 /* When the RxDn is held in logic 0, then a null byte is pushed into the 531 * fifo */ 532 fifo_store(&s->rx, '\0'); 533 s->reg[I_(UERSTAT)] |= UERSTAT_BREAK; 534 exynos4210_uart_update_irq(s); 535 } 536 } 537 538 539 static void exynos4210_uart_reset(DeviceState *dev) 540 { 541 Exynos4210UartState *s = 542 container_of(dev, Exynos4210UartState, busdev.qdev); 543 int regs_number = sizeof(exynos4210_uart_regs)/sizeof(Exynos4210UartReg); 544 int i; 545 546 for (i = 0; i < regs_number; i++) { 547 s->reg[I_(exynos4210_uart_regs[i].offset)] = 548 exynos4210_uart_regs[i].reset_value; 549 } 550 551 fifo_reset(&s->rx); 552 fifo_reset(&s->tx); 553 554 PRINT_DEBUG("UART%d: Rx FIFO size: %d\n", s->channel, s->rx.size); 555 } 556 557 static const VMStateDescription vmstate_exynos4210_uart_fifo = { 558 .name = "exynos4210.uart.fifo", 559 .version_id = 1, 560 .minimum_version_id = 1, 561 .minimum_version_id_old = 1, 562 .fields = (VMStateField[]) { 563 VMSTATE_UINT32(sp, Exynos4210UartFIFO), 564 VMSTATE_UINT32(rp, Exynos4210UartFIFO), 565 VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, 0, size), 566 VMSTATE_END_OF_LIST() 567 } 568 }; 569 570 static const VMStateDescription vmstate_exynos4210_uart = { 571 .name = "exynos4210.uart", 572 .version_id = 1, 573 .minimum_version_id = 1, 574 .minimum_version_id_old = 1, 575 .fields = (VMStateField[]) { 576 VMSTATE_STRUCT(rx, Exynos4210UartState, 1, 577 vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO), 578 VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState, 579 EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)), 580 VMSTATE_END_OF_LIST() 581 } 582 }; 583 584 DeviceState *exynos4210_uart_create(hwaddr addr, 585 int fifo_size, 586 int channel, 587 CharDriverState *chr, 588 qemu_irq irq) 589 { 590 DeviceState *dev; 591 SysBusDevice *bus; 592 593 const char chr_name[] = "serial"; 594 char label[ARRAY_SIZE(chr_name) + 1]; 595 596 dev = qdev_create(NULL, "exynos4210.uart"); 597 598 if (!chr) { 599 if (channel >= MAX_SERIAL_PORTS) { 600 hw_error("Only %d serial ports are supported by QEMU.\n", 601 MAX_SERIAL_PORTS); 602 } 603 chr = serial_hds[channel]; 604 if (!chr) { 605 snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, channel); 606 chr = qemu_chr_new(label, "null", NULL); 607 if (!(chr)) { 608 hw_error("Can't assign serial port to UART%d.\n", channel); 609 } 610 } 611 } 612 613 qdev_prop_set_chr(dev, "chardev", chr); 614 qdev_prop_set_uint32(dev, "channel", channel); 615 qdev_prop_set_uint32(dev, "rx-size", fifo_size); 616 qdev_prop_set_uint32(dev, "tx-size", fifo_size); 617 618 bus = SYS_BUS_DEVICE(dev); 619 qdev_init_nofail(dev); 620 if (addr != (hwaddr)-1) { 621 sysbus_mmio_map(bus, 0, addr); 622 } 623 sysbus_connect_irq(bus, 0, irq); 624 625 return dev; 626 } 627 628 static int exynos4210_uart_init(SysBusDevice *dev) 629 { 630 Exynos4210UartState *s = FROM_SYSBUS(Exynos4210UartState, dev); 631 632 /* memory mapping */ 633 memory_region_init_io(&s->iomem, &exynos4210_uart_ops, s, "exynos4210.uart", 634 EXYNOS4210_UART_REGS_MEM_SIZE); 635 sysbus_init_mmio(dev, &s->iomem); 636 637 sysbus_init_irq(dev, &s->irq); 638 639 qemu_chr_add_handlers(s->chr, exynos4210_uart_can_receive, 640 exynos4210_uart_receive, exynos4210_uart_event, s); 641 642 return 0; 643 } 644 645 static Property exynos4210_uart_properties[] = { 646 DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr), 647 DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0), 648 DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16), 649 DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16), 650 DEFINE_PROP_END_OF_LIST(), 651 }; 652 653 static void exynos4210_uart_class_init(ObjectClass *klass, void *data) 654 { 655 DeviceClass *dc = DEVICE_CLASS(klass); 656 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 657 658 k->init = exynos4210_uart_init; 659 dc->reset = exynos4210_uart_reset; 660 dc->props = exynos4210_uart_properties; 661 dc->vmsd = &vmstate_exynos4210_uart; 662 } 663 664 static const TypeInfo exynos4210_uart_info = { 665 .name = "exynos4210.uart", 666 .parent = TYPE_SYS_BUS_DEVICE, 667 .instance_size = sizeof(Exynos4210UartState), 668 .class_init = exynos4210_uart_class_init, 669 }; 670 671 static void exynos4210_uart_register(void) 672 { 673 type_register_static(&exynos4210_uart_info); 674 } 675 676 type_init(exynos4210_uart_register) 677