1 /* 2 * Exynos4210 UART Emulation 3 * 4 * Copyright (C) 2011 Samsung Electronics Co Ltd. 5 * Maksim Kozlov, <m.kozlov@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 15 * for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 * 20 */ 21 22 #include "qemu/osdep.h" 23 #include "hw/sysbus.h" 24 #include "migration/vmstate.h" 25 #include "qemu/error-report.h" 26 #include "qemu/module.h" 27 #include "chardev/char-fe.h" 28 #include "chardev/char-serial.h" 29 30 #include "hw/arm/exynos4210.h" 31 #include "hw/irq.h" 32 #include "hw/qdev-properties.h" 33 34 #undef DEBUG_UART 35 #undef DEBUG_UART_EXTEND 36 #undef DEBUG_IRQ 37 #undef DEBUG_Rx_DATA 38 #undef DEBUG_Tx_DATA 39 40 #define DEBUG_UART 0 41 #define DEBUG_UART_EXTEND 0 42 #define DEBUG_IRQ 0 43 #define DEBUG_Rx_DATA 0 44 #define DEBUG_Tx_DATA 0 45 46 #if DEBUG_UART 47 #define PRINT_DEBUG(fmt, args...) \ 48 do { \ 49 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 50 } while (0) 51 52 #if DEBUG_UART_EXTEND 53 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 54 do { \ 55 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 56 } while (0) 57 #else 58 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 59 do {} while (0) 60 #endif /* EXTEND */ 61 62 #else 63 #define PRINT_DEBUG(fmt, args...) \ 64 do {} while (0) 65 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 66 do {} while (0) 67 #endif 68 69 #define PRINT_ERROR(fmt, args...) \ 70 do { \ 71 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 72 } while (0) 73 74 /* 75 * Offsets for UART registers relative to SFR base address 76 * for UARTn 77 * 78 */ 79 #define ULCON 0x0000 /* Line Control */ 80 #define UCON 0x0004 /* Control */ 81 #define UFCON 0x0008 /* FIFO Control */ 82 #define UMCON 0x000C /* Modem Control */ 83 #define UTRSTAT 0x0010 /* Tx/Rx Status */ 84 #define UERSTAT 0x0014 /* UART Error Status */ 85 #define UFSTAT 0x0018 /* FIFO Status */ 86 #define UMSTAT 0x001C /* Modem Status */ 87 #define UTXH 0x0020 /* Transmit Buffer */ 88 #define URXH 0x0024 /* Receive Buffer */ 89 #define UBRDIV 0x0028 /* Baud Rate Divisor */ 90 #define UFRACVAL 0x002C /* Divisor Fractional Value */ 91 #define UINTP 0x0030 /* Interrupt Pending */ 92 #define UINTSP 0x0034 /* Interrupt Source Pending */ 93 #define UINTM 0x0038 /* Interrupt Mask */ 94 95 /* 96 * for indexing register in the uint32_t array 97 * 98 * 'reg' - register offset (see offsets definitions above) 99 * 100 */ 101 #define I_(reg) (reg / sizeof(uint32_t)) 102 103 typedef struct Exynos4210UartReg { 104 const char *name; /* the only reason is the debug output */ 105 hwaddr offset; 106 uint32_t reset_value; 107 } Exynos4210UartReg; 108 109 static const Exynos4210UartReg exynos4210_uart_regs[] = { 110 {"ULCON", ULCON, 0x00000000}, 111 {"UCON", UCON, 0x00003000}, 112 {"UFCON", UFCON, 0x00000000}, 113 {"UMCON", UMCON, 0x00000000}, 114 {"UTRSTAT", UTRSTAT, 0x00000006}, /* RO */ 115 {"UERSTAT", UERSTAT, 0x00000000}, /* RO */ 116 {"UFSTAT", UFSTAT, 0x00000000}, /* RO */ 117 {"UMSTAT", UMSTAT, 0x00000000}, /* RO */ 118 {"UTXH", UTXH, 0x5c5c5c5c}, /* WO, undefined reset value*/ 119 {"URXH", URXH, 0x00000000}, /* RO */ 120 {"UBRDIV", UBRDIV, 0x00000000}, 121 {"UFRACVAL", UFRACVAL, 0x00000000}, 122 {"UINTP", UINTP, 0x00000000}, 123 {"UINTSP", UINTSP, 0x00000000}, 124 {"UINTM", UINTM, 0x00000000}, 125 }; 126 127 #define EXYNOS4210_UART_REGS_MEM_SIZE 0x3C 128 129 /* UART FIFO Control */ 130 #define UFCON_FIFO_ENABLE 0x1 131 #define UFCON_Rx_FIFO_RESET 0x2 132 #define UFCON_Tx_FIFO_RESET 0x4 133 #define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT 8 134 #define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT) 135 #define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT 4 136 #define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT) 137 138 /* Uart FIFO Status */ 139 #define UFSTAT_Rx_FIFO_COUNT 0xff 140 #define UFSTAT_Rx_FIFO_FULL 0x100 141 #define UFSTAT_Rx_FIFO_ERROR 0x200 142 #define UFSTAT_Tx_FIFO_COUNT_SHIFT 16 143 #define UFSTAT_Tx_FIFO_COUNT (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT) 144 #define UFSTAT_Tx_FIFO_FULL_SHIFT 24 145 #define UFSTAT_Tx_FIFO_FULL (1 << UFSTAT_Tx_FIFO_FULL_SHIFT) 146 147 /* UART Interrupt Source Pending */ 148 #define UINTSP_RXD 0x1 /* Receive interrupt */ 149 #define UINTSP_ERROR 0x2 /* Error interrupt */ 150 #define UINTSP_TXD 0x4 /* Transmit interrupt */ 151 #define UINTSP_MODEM 0x8 /* Modem interrupt */ 152 153 /* UART Line Control */ 154 #define ULCON_IR_MODE_SHIFT 6 155 #define ULCON_PARITY_SHIFT 3 156 #define ULCON_STOP_BIT_SHIFT 1 157 158 /* UART Tx/Rx Status */ 159 #define UTRSTAT_TRANSMITTER_EMPTY 0x4 160 #define UTRSTAT_Tx_BUFFER_EMPTY 0x2 161 #define UTRSTAT_Rx_BUFFER_DATA_READY 0x1 162 163 /* UART Error Status */ 164 #define UERSTAT_OVERRUN 0x1 165 #define UERSTAT_PARITY 0x2 166 #define UERSTAT_FRAME 0x4 167 #define UERSTAT_BREAK 0x8 168 169 typedef struct { 170 uint8_t *data; 171 uint32_t sp, rp; /* store and retrieve pointers */ 172 uint32_t size; 173 } Exynos4210UartFIFO; 174 175 #define TYPE_EXYNOS4210_UART "exynos4210.uart" 176 #define EXYNOS4210_UART(obj) \ 177 OBJECT_CHECK(Exynos4210UartState, (obj), TYPE_EXYNOS4210_UART) 178 179 typedef struct Exynos4210UartState { 180 SysBusDevice parent_obj; 181 182 MemoryRegion iomem; 183 184 uint32_t reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)]; 185 Exynos4210UartFIFO rx; 186 Exynos4210UartFIFO tx; 187 188 CharBackend chr; 189 qemu_irq irq; 190 191 uint32_t channel; 192 193 } Exynos4210UartState; 194 195 196 #if DEBUG_UART 197 /* Used only for debugging inside PRINT_DEBUG_... macros */ 198 static const char *exynos4210_uart_regname(hwaddr offset) 199 { 200 201 int i; 202 203 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { 204 if (offset == exynos4210_uart_regs[i].offset) { 205 return exynos4210_uart_regs[i].name; 206 } 207 } 208 209 return NULL; 210 } 211 #endif 212 213 214 static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch) 215 { 216 q->data[q->sp] = ch; 217 q->sp = (q->sp + 1) % q->size; 218 } 219 220 static uint8_t fifo_retrieve(Exynos4210UartFIFO *q) 221 { 222 uint8_t ret = q->data[q->rp]; 223 q->rp = (q->rp + 1) % q->size; 224 return ret; 225 } 226 227 static int fifo_elements_number(const Exynos4210UartFIFO *q) 228 { 229 if (q->sp < q->rp) { 230 return q->size - q->rp + q->sp; 231 } 232 233 return q->sp - q->rp; 234 } 235 236 static int fifo_empty_elements_number(const Exynos4210UartFIFO *q) 237 { 238 return q->size - fifo_elements_number(q); 239 } 240 241 static void fifo_reset(Exynos4210UartFIFO *q) 242 { 243 g_free(q->data); 244 q->data = NULL; 245 246 q->data = (uint8_t *)g_malloc0(q->size); 247 248 q->sp = 0; 249 q->rp = 0; 250 } 251 252 static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState *s) 253 { 254 uint32_t level = 0; 255 uint32_t reg; 256 257 reg = (s->reg[I_(UFCON)] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >> 258 UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT; 259 260 switch (s->channel) { 261 case 0: 262 level = reg * 32; 263 break; 264 case 1: 265 case 4: 266 level = reg * 8; 267 break; 268 case 2: 269 case 3: 270 level = reg * 2; 271 break; 272 default: 273 level = 0; 274 PRINT_ERROR("Wrong UART channel number: %d\n", s->channel); 275 } 276 277 return level; 278 } 279 280 static void exynos4210_uart_update_irq(Exynos4210UartState *s) 281 { 282 /* 283 * The Tx interrupt is always requested if the number of data in the 284 * transmit FIFO is smaller than the trigger level. 285 */ 286 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 287 288 uint32_t count = (s->reg[I_(UFSTAT)] & UFSTAT_Tx_FIFO_COUNT) >> 289 UFSTAT_Tx_FIFO_COUNT_SHIFT; 290 291 if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) { 292 s->reg[I_(UINTSP)] |= UINTSP_TXD; 293 } 294 } 295 296 s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)]; 297 298 if (s->reg[I_(UINTP)]) { 299 qemu_irq_raise(s->irq); 300 301 #if DEBUG_IRQ 302 fprintf(stderr, "UART%d: IRQ has been raised: %08x\n", 303 s->channel, s->reg[I_(UINTP)]); 304 #endif 305 306 } else { 307 qemu_irq_lower(s->irq); 308 } 309 } 310 311 static void exynos4210_uart_update_parameters(Exynos4210UartState *s) 312 { 313 int speed, parity, data_bits, stop_bits; 314 QEMUSerialSetParams ssp; 315 uint64_t uclk_rate; 316 317 if (s->reg[I_(UBRDIV)] == 0) { 318 return; 319 } 320 321 if (s->reg[I_(ULCON)] & 0x20) { 322 if (s->reg[I_(ULCON)] & 0x28) { 323 parity = 'E'; 324 } else { 325 parity = 'O'; 326 } 327 } else { 328 parity = 'N'; 329 } 330 331 if (s->reg[I_(ULCON)] & 0x4) { 332 stop_bits = 2; 333 } else { 334 stop_bits = 1; 335 } 336 337 data_bits = (s->reg[I_(ULCON)] & 0x3) + 5; 338 339 uclk_rate = 24000000; 340 341 speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) + 342 (s->reg[I_(UFRACVAL)] & 0x7) + 16); 343 344 ssp.speed = speed; 345 ssp.parity = parity; 346 ssp.data_bits = data_bits; 347 ssp.stop_bits = stop_bits; 348 349 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 350 351 PRINT_DEBUG("UART%d: speed: %d, parity: %c, data: %d, stop: %d\n", 352 s->channel, speed, parity, data_bits, stop_bits); 353 } 354 355 static void exynos4210_uart_write(void *opaque, hwaddr offset, 356 uint64_t val, unsigned size) 357 { 358 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 359 uint8_t ch; 360 361 PRINT_DEBUG_EXTEND("UART%d: <0x%04x> %s <- 0x%08llx\n", s->channel, 362 offset, exynos4210_uart_regname(offset), (long long unsigned int)val); 363 364 switch (offset) { 365 case ULCON: 366 case UBRDIV: 367 case UFRACVAL: 368 s->reg[I_(offset)] = val; 369 exynos4210_uart_update_parameters(s); 370 break; 371 case UFCON: 372 s->reg[I_(UFCON)] = val; 373 if (val & UFCON_Rx_FIFO_RESET) { 374 fifo_reset(&s->rx); 375 s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET; 376 PRINT_DEBUG("UART%d: Rx FIFO Reset\n", s->channel); 377 } 378 if (val & UFCON_Tx_FIFO_RESET) { 379 fifo_reset(&s->tx); 380 s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET; 381 PRINT_DEBUG("UART%d: Tx FIFO Reset\n", s->channel); 382 } 383 break; 384 385 case UTXH: 386 if (qemu_chr_fe_backend_connected(&s->chr)) { 387 s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY | 388 UTRSTAT_Tx_BUFFER_EMPTY); 389 ch = (uint8_t)val; 390 /* XXX this blocks entire thread. Rewrite to use 391 * qemu_chr_fe_write and background I/O callbacks */ 392 qemu_chr_fe_write_all(&s->chr, &ch, 1); 393 #if DEBUG_Tx_DATA 394 fprintf(stderr, "%c", ch); 395 #endif 396 s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY | 397 UTRSTAT_Tx_BUFFER_EMPTY; 398 s->reg[I_(UINTSP)] |= UINTSP_TXD; 399 exynos4210_uart_update_irq(s); 400 } 401 break; 402 403 case UINTP: 404 s->reg[I_(UINTP)] &= ~val; 405 s->reg[I_(UINTSP)] &= ~val; 406 PRINT_DEBUG("UART%d: UINTP [%04x] have been cleared: %08x\n", 407 s->channel, offset, s->reg[I_(UINTP)]); 408 exynos4210_uart_update_irq(s); 409 break; 410 case UTRSTAT: 411 case UERSTAT: 412 case UFSTAT: 413 case UMSTAT: 414 case URXH: 415 PRINT_DEBUG("UART%d: Trying to write into RO register: %s [%04x]\n", 416 s->channel, exynos4210_uart_regname(offset), offset); 417 break; 418 case UINTSP: 419 s->reg[I_(UINTSP)] &= ~val; 420 break; 421 case UINTM: 422 s->reg[I_(UINTM)] = val; 423 exynos4210_uart_update_irq(s); 424 break; 425 case UCON: 426 case UMCON: 427 default: 428 s->reg[I_(offset)] = val; 429 break; 430 } 431 } 432 static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset, 433 unsigned size) 434 { 435 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 436 uint32_t res; 437 438 switch (offset) { 439 case UERSTAT: /* Read Only */ 440 res = s->reg[I_(UERSTAT)]; 441 s->reg[I_(UERSTAT)] = 0; 442 return res; 443 case UFSTAT: /* Read Only */ 444 s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff; 445 if (fifo_empty_elements_number(&s->rx) == 0) { 446 s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL; 447 s->reg[I_(UFSTAT)] &= ~0xff; 448 } 449 return s->reg[I_(UFSTAT)]; 450 case URXH: 451 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 452 if (fifo_elements_number(&s->rx)) { 453 res = fifo_retrieve(&s->rx); 454 #if DEBUG_Rx_DATA 455 fprintf(stderr, "%c", res); 456 #endif 457 if (!fifo_elements_number(&s->rx)) { 458 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 459 } else { 460 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 461 } 462 } else { 463 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 464 exynos4210_uart_update_irq(s); 465 res = 0; 466 } 467 } else { 468 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 469 res = s->reg[I_(URXH)]; 470 } 471 return res; 472 case UTXH: 473 PRINT_DEBUG("UART%d: Trying to read from WO register: %s [%04x]\n", 474 s->channel, exynos4210_uart_regname(offset), offset); 475 break; 476 default: 477 return s->reg[I_(offset)]; 478 } 479 480 return 0; 481 } 482 483 static const MemoryRegionOps exynos4210_uart_ops = { 484 .read = exynos4210_uart_read, 485 .write = exynos4210_uart_write, 486 .endianness = DEVICE_NATIVE_ENDIAN, 487 .valid = { 488 .max_access_size = 4, 489 .unaligned = false 490 }, 491 }; 492 493 static int exynos4210_uart_can_receive(void *opaque) 494 { 495 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 496 497 return fifo_empty_elements_number(&s->rx); 498 } 499 500 501 static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size) 502 { 503 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 504 int i; 505 506 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 507 if (fifo_empty_elements_number(&s->rx) < size) { 508 for (i = 0; i < fifo_empty_elements_number(&s->rx); i++) { 509 fifo_store(&s->rx, buf[i]); 510 } 511 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 512 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 513 } else { 514 for (i = 0; i < size; i++) { 515 fifo_store(&s->rx, buf[i]); 516 } 517 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 518 } 519 /* XXX: Around here we maybe should check Rx trigger level */ 520 s->reg[I_(UINTSP)] |= UINTSP_RXD; 521 } else { 522 s->reg[I_(URXH)] = buf[0]; 523 s->reg[I_(UINTSP)] |= UINTSP_RXD; 524 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 525 } 526 527 exynos4210_uart_update_irq(s); 528 } 529 530 531 static void exynos4210_uart_event(void *opaque, QEMUChrEvent event) 532 { 533 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 534 535 if (event == CHR_EVENT_BREAK) { 536 /* When the RxDn is held in logic 0, then a null byte is pushed into the 537 * fifo */ 538 fifo_store(&s->rx, '\0'); 539 s->reg[I_(UERSTAT)] |= UERSTAT_BREAK; 540 exynos4210_uart_update_irq(s); 541 } 542 } 543 544 545 static void exynos4210_uart_reset(DeviceState *dev) 546 { 547 Exynos4210UartState *s = EXYNOS4210_UART(dev); 548 int i; 549 550 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { 551 s->reg[I_(exynos4210_uart_regs[i].offset)] = 552 exynos4210_uart_regs[i].reset_value; 553 } 554 555 fifo_reset(&s->rx); 556 fifo_reset(&s->tx); 557 558 PRINT_DEBUG("UART%d: Rx FIFO size: %d\n", s->channel, s->rx.size); 559 } 560 561 static const VMStateDescription vmstate_exynos4210_uart_fifo = { 562 .name = "exynos4210.uart.fifo", 563 .version_id = 1, 564 .minimum_version_id = 1, 565 .fields = (VMStateField[]) { 566 VMSTATE_UINT32(sp, Exynos4210UartFIFO), 567 VMSTATE_UINT32(rp, Exynos4210UartFIFO), 568 VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, size), 569 VMSTATE_END_OF_LIST() 570 } 571 }; 572 573 static const VMStateDescription vmstate_exynos4210_uart = { 574 .name = "exynos4210.uart", 575 .version_id = 1, 576 .minimum_version_id = 1, 577 .fields = (VMStateField[]) { 578 VMSTATE_STRUCT(rx, Exynos4210UartState, 1, 579 vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO), 580 VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState, 581 EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)), 582 VMSTATE_END_OF_LIST() 583 } 584 }; 585 586 DeviceState *exynos4210_uart_create(hwaddr addr, 587 int fifo_size, 588 int channel, 589 Chardev *chr, 590 qemu_irq irq) 591 { 592 DeviceState *dev; 593 SysBusDevice *bus; 594 595 dev = qdev_create(NULL, TYPE_EXYNOS4210_UART); 596 597 qdev_prop_set_chr(dev, "chardev", chr); 598 qdev_prop_set_uint32(dev, "channel", channel); 599 qdev_prop_set_uint32(dev, "rx-size", fifo_size); 600 qdev_prop_set_uint32(dev, "tx-size", fifo_size); 601 602 bus = SYS_BUS_DEVICE(dev); 603 qdev_init_nofail(dev); 604 if (addr != (hwaddr)-1) { 605 sysbus_mmio_map(bus, 0, addr); 606 } 607 sysbus_connect_irq(bus, 0, irq); 608 609 return dev; 610 } 611 612 static void exynos4210_uart_init(Object *obj) 613 { 614 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 615 Exynos4210UartState *s = EXYNOS4210_UART(dev); 616 617 /* memory mapping */ 618 memory_region_init_io(&s->iomem, obj, &exynos4210_uart_ops, s, 619 "exynos4210.uart", EXYNOS4210_UART_REGS_MEM_SIZE); 620 sysbus_init_mmio(dev, &s->iomem); 621 622 sysbus_init_irq(dev, &s->irq); 623 } 624 625 static void exynos4210_uart_realize(DeviceState *dev, Error **errp) 626 { 627 Exynos4210UartState *s = EXYNOS4210_UART(dev); 628 629 qemu_chr_fe_set_handlers(&s->chr, exynos4210_uart_can_receive, 630 exynos4210_uart_receive, exynos4210_uart_event, 631 NULL, s, NULL, true); 632 } 633 634 static Property exynos4210_uart_properties[] = { 635 DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr), 636 DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0), 637 DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16), 638 DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16), 639 DEFINE_PROP_END_OF_LIST(), 640 }; 641 642 static void exynos4210_uart_class_init(ObjectClass *klass, void *data) 643 { 644 DeviceClass *dc = DEVICE_CLASS(klass); 645 646 dc->realize = exynos4210_uart_realize; 647 dc->reset = exynos4210_uart_reset; 648 dc->props = exynos4210_uart_properties; 649 dc->vmsd = &vmstate_exynos4210_uart; 650 } 651 652 static const TypeInfo exynos4210_uart_info = { 653 .name = TYPE_EXYNOS4210_UART, 654 .parent = TYPE_SYS_BUS_DEVICE, 655 .instance_size = sizeof(Exynos4210UartState), 656 .instance_init = exynos4210_uart_init, 657 .class_init = exynos4210_uart_class_init, 658 }; 659 660 static void exynos4210_uart_register(void) 661 { 662 type_register_static(&exynos4210_uart_info); 663 } 664 665 type_init(exynos4210_uart_register) 666