1 /* 2 * Exynos4210 UART Emulation 3 * 4 * Copyright (C) 2011 Samsung Electronics Co Ltd. 5 * Maksim Kozlov, <m.kozlov@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 15 * for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 * 20 */ 21 22 #include "qemu/osdep.h" 23 #include "hw/sysbus.h" 24 #include "qemu/error-report.h" 25 #include "sysemu/sysemu.h" 26 #include "chardev/char-fe.h" 27 #include "chardev/char-serial.h" 28 29 #include "hw/arm/exynos4210.h" 30 31 #undef DEBUG_UART 32 #undef DEBUG_UART_EXTEND 33 #undef DEBUG_IRQ 34 #undef DEBUG_Rx_DATA 35 #undef DEBUG_Tx_DATA 36 37 #define DEBUG_UART 0 38 #define DEBUG_UART_EXTEND 0 39 #define DEBUG_IRQ 0 40 #define DEBUG_Rx_DATA 0 41 #define DEBUG_Tx_DATA 0 42 43 #if DEBUG_UART 44 #define PRINT_DEBUG(fmt, args...) \ 45 do { \ 46 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 47 } while (0) 48 49 #if DEBUG_UART_EXTEND 50 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 51 do { \ 52 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 53 } while (0) 54 #else 55 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 56 do {} while (0) 57 #endif /* EXTEND */ 58 59 #else 60 #define PRINT_DEBUG(fmt, args...) \ 61 do {} while (0) 62 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 63 do {} while (0) 64 #endif 65 66 #define PRINT_ERROR(fmt, args...) \ 67 do { \ 68 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 69 } while (0) 70 71 /* 72 * Offsets for UART registers relative to SFR base address 73 * for UARTn 74 * 75 */ 76 #define ULCON 0x0000 /* Line Control */ 77 #define UCON 0x0004 /* Control */ 78 #define UFCON 0x0008 /* FIFO Control */ 79 #define UMCON 0x000C /* Modem Control */ 80 #define UTRSTAT 0x0010 /* Tx/Rx Status */ 81 #define UERSTAT 0x0014 /* UART Error Status */ 82 #define UFSTAT 0x0018 /* FIFO Status */ 83 #define UMSTAT 0x001C /* Modem Status */ 84 #define UTXH 0x0020 /* Transmit Buffer */ 85 #define URXH 0x0024 /* Receive Buffer */ 86 #define UBRDIV 0x0028 /* Baud Rate Divisor */ 87 #define UFRACVAL 0x002C /* Divisor Fractional Value */ 88 #define UINTP 0x0030 /* Interrupt Pending */ 89 #define UINTSP 0x0034 /* Interrupt Source Pending */ 90 #define UINTM 0x0038 /* Interrupt Mask */ 91 92 /* 93 * for indexing register in the uint32_t array 94 * 95 * 'reg' - register offset (see offsets definitions above) 96 * 97 */ 98 #define I_(reg) (reg / sizeof(uint32_t)) 99 100 typedef struct Exynos4210UartReg { 101 const char *name; /* the only reason is the debug output */ 102 hwaddr offset; 103 uint32_t reset_value; 104 } Exynos4210UartReg; 105 106 static const Exynos4210UartReg exynos4210_uart_regs[] = { 107 {"ULCON", ULCON, 0x00000000}, 108 {"UCON", UCON, 0x00003000}, 109 {"UFCON", UFCON, 0x00000000}, 110 {"UMCON", UMCON, 0x00000000}, 111 {"UTRSTAT", UTRSTAT, 0x00000006}, /* RO */ 112 {"UERSTAT", UERSTAT, 0x00000000}, /* RO */ 113 {"UFSTAT", UFSTAT, 0x00000000}, /* RO */ 114 {"UMSTAT", UMSTAT, 0x00000000}, /* RO */ 115 {"UTXH", UTXH, 0x5c5c5c5c}, /* WO, undefined reset value*/ 116 {"URXH", URXH, 0x00000000}, /* RO */ 117 {"UBRDIV", UBRDIV, 0x00000000}, 118 {"UFRACVAL", UFRACVAL, 0x00000000}, 119 {"UINTP", UINTP, 0x00000000}, 120 {"UINTSP", UINTSP, 0x00000000}, 121 {"UINTM", UINTM, 0x00000000}, 122 }; 123 124 #define EXYNOS4210_UART_REGS_MEM_SIZE 0x3C 125 126 /* UART FIFO Control */ 127 #define UFCON_FIFO_ENABLE 0x1 128 #define UFCON_Rx_FIFO_RESET 0x2 129 #define UFCON_Tx_FIFO_RESET 0x4 130 #define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT 8 131 #define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT) 132 #define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT 4 133 #define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT) 134 135 /* Uart FIFO Status */ 136 #define UFSTAT_Rx_FIFO_COUNT 0xff 137 #define UFSTAT_Rx_FIFO_FULL 0x100 138 #define UFSTAT_Rx_FIFO_ERROR 0x200 139 #define UFSTAT_Tx_FIFO_COUNT_SHIFT 16 140 #define UFSTAT_Tx_FIFO_COUNT (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT) 141 #define UFSTAT_Tx_FIFO_FULL_SHIFT 24 142 #define UFSTAT_Tx_FIFO_FULL (1 << UFSTAT_Tx_FIFO_FULL_SHIFT) 143 144 /* UART Interrupt Source Pending */ 145 #define UINTSP_RXD 0x1 /* Receive interrupt */ 146 #define UINTSP_ERROR 0x2 /* Error interrupt */ 147 #define UINTSP_TXD 0x4 /* Transmit interrupt */ 148 #define UINTSP_MODEM 0x8 /* Modem interrupt */ 149 150 /* UART Line Control */ 151 #define ULCON_IR_MODE_SHIFT 6 152 #define ULCON_PARITY_SHIFT 3 153 #define ULCON_STOP_BIT_SHIFT 1 154 155 /* UART Tx/Rx Status */ 156 #define UTRSTAT_TRANSMITTER_EMPTY 0x4 157 #define UTRSTAT_Tx_BUFFER_EMPTY 0x2 158 #define UTRSTAT_Rx_BUFFER_DATA_READY 0x1 159 160 /* UART Error Status */ 161 #define UERSTAT_OVERRUN 0x1 162 #define UERSTAT_PARITY 0x2 163 #define UERSTAT_FRAME 0x4 164 #define UERSTAT_BREAK 0x8 165 166 typedef struct { 167 uint8_t *data; 168 uint32_t sp, rp; /* store and retrieve pointers */ 169 uint32_t size; 170 } Exynos4210UartFIFO; 171 172 #define TYPE_EXYNOS4210_UART "exynos4210.uart" 173 #define EXYNOS4210_UART(obj) \ 174 OBJECT_CHECK(Exynos4210UartState, (obj), TYPE_EXYNOS4210_UART) 175 176 typedef struct Exynos4210UartState { 177 SysBusDevice parent_obj; 178 179 MemoryRegion iomem; 180 181 uint32_t reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)]; 182 Exynos4210UartFIFO rx; 183 Exynos4210UartFIFO tx; 184 185 CharBackend chr; 186 qemu_irq irq; 187 188 uint32_t channel; 189 190 } Exynos4210UartState; 191 192 193 #if DEBUG_UART 194 /* Used only for debugging inside PRINT_DEBUG_... macros */ 195 static const char *exynos4210_uart_regname(hwaddr offset) 196 { 197 198 int i; 199 200 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { 201 if (offset == exynos4210_uart_regs[i].offset) { 202 return exynos4210_uart_regs[i].name; 203 } 204 } 205 206 return NULL; 207 } 208 #endif 209 210 211 static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch) 212 { 213 q->data[q->sp] = ch; 214 q->sp = (q->sp + 1) % q->size; 215 } 216 217 static uint8_t fifo_retrieve(Exynos4210UartFIFO *q) 218 { 219 uint8_t ret = q->data[q->rp]; 220 q->rp = (q->rp + 1) % q->size; 221 return ret; 222 } 223 224 static int fifo_elements_number(const Exynos4210UartFIFO *q) 225 { 226 if (q->sp < q->rp) { 227 return q->size - q->rp + q->sp; 228 } 229 230 return q->sp - q->rp; 231 } 232 233 static int fifo_empty_elements_number(const Exynos4210UartFIFO *q) 234 { 235 return q->size - fifo_elements_number(q); 236 } 237 238 static void fifo_reset(Exynos4210UartFIFO *q) 239 { 240 g_free(q->data); 241 q->data = NULL; 242 243 q->data = (uint8_t *)g_malloc0(q->size); 244 245 q->sp = 0; 246 q->rp = 0; 247 } 248 249 static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState *s) 250 { 251 uint32_t level = 0; 252 uint32_t reg; 253 254 reg = (s->reg[I_(UFCON)] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >> 255 UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT; 256 257 switch (s->channel) { 258 case 0: 259 level = reg * 32; 260 break; 261 case 1: 262 case 4: 263 level = reg * 8; 264 break; 265 case 2: 266 case 3: 267 level = reg * 2; 268 break; 269 default: 270 level = 0; 271 PRINT_ERROR("Wrong UART channel number: %d\n", s->channel); 272 } 273 274 return level; 275 } 276 277 static void exynos4210_uart_update_irq(Exynos4210UartState *s) 278 { 279 /* 280 * The Tx interrupt is always requested if the number of data in the 281 * transmit FIFO is smaller than the trigger level. 282 */ 283 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 284 285 uint32_t count = (s->reg[I_(UFSTAT)] & UFSTAT_Tx_FIFO_COUNT) >> 286 UFSTAT_Tx_FIFO_COUNT_SHIFT; 287 288 if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) { 289 s->reg[I_(UINTSP)] |= UINTSP_TXD; 290 } 291 } 292 293 s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)]; 294 295 if (s->reg[I_(UINTP)]) { 296 qemu_irq_raise(s->irq); 297 298 #if DEBUG_IRQ 299 fprintf(stderr, "UART%d: IRQ has been raised: %08x\n", 300 s->channel, s->reg[I_(UINTP)]); 301 #endif 302 303 } else { 304 qemu_irq_lower(s->irq); 305 } 306 } 307 308 static void exynos4210_uart_update_parameters(Exynos4210UartState *s) 309 { 310 int speed, parity, data_bits, stop_bits; 311 QEMUSerialSetParams ssp; 312 uint64_t uclk_rate; 313 314 if (s->reg[I_(UBRDIV)] == 0) { 315 return; 316 } 317 318 if (s->reg[I_(ULCON)] & 0x20) { 319 if (s->reg[I_(ULCON)] & 0x28) { 320 parity = 'E'; 321 } else { 322 parity = 'O'; 323 } 324 } else { 325 parity = 'N'; 326 } 327 328 if (s->reg[I_(ULCON)] & 0x4) { 329 stop_bits = 2; 330 } else { 331 stop_bits = 1; 332 } 333 334 data_bits = (s->reg[I_(ULCON)] & 0x3) + 5; 335 336 uclk_rate = 24000000; 337 338 speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) + 339 (s->reg[I_(UFRACVAL)] & 0x7) + 16); 340 341 ssp.speed = speed; 342 ssp.parity = parity; 343 ssp.data_bits = data_bits; 344 ssp.stop_bits = stop_bits; 345 346 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 347 348 PRINT_DEBUG("UART%d: speed: %d, parity: %c, data: %d, stop: %d\n", 349 s->channel, speed, parity, data_bits, stop_bits); 350 } 351 352 static void exynos4210_uart_write(void *opaque, hwaddr offset, 353 uint64_t val, unsigned size) 354 { 355 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 356 uint8_t ch; 357 358 PRINT_DEBUG_EXTEND("UART%d: <0x%04x> %s <- 0x%08llx\n", s->channel, 359 offset, exynos4210_uart_regname(offset), (long long unsigned int)val); 360 361 switch (offset) { 362 case ULCON: 363 case UBRDIV: 364 case UFRACVAL: 365 s->reg[I_(offset)] = val; 366 exynos4210_uart_update_parameters(s); 367 break; 368 case UFCON: 369 s->reg[I_(UFCON)] = val; 370 if (val & UFCON_Rx_FIFO_RESET) { 371 fifo_reset(&s->rx); 372 s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET; 373 PRINT_DEBUG("UART%d: Rx FIFO Reset\n", s->channel); 374 } 375 if (val & UFCON_Tx_FIFO_RESET) { 376 fifo_reset(&s->tx); 377 s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET; 378 PRINT_DEBUG("UART%d: Tx FIFO Reset\n", s->channel); 379 } 380 break; 381 382 case UTXH: 383 if (qemu_chr_fe_backend_connected(&s->chr)) { 384 s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY | 385 UTRSTAT_Tx_BUFFER_EMPTY); 386 ch = (uint8_t)val; 387 /* XXX this blocks entire thread. Rewrite to use 388 * qemu_chr_fe_write and background I/O callbacks */ 389 qemu_chr_fe_write_all(&s->chr, &ch, 1); 390 #if DEBUG_Tx_DATA 391 fprintf(stderr, "%c", ch); 392 #endif 393 s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY | 394 UTRSTAT_Tx_BUFFER_EMPTY; 395 s->reg[I_(UINTSP)] |= UINTSP_TXD; 396 exynos4210_uart_update_irq(s); 397 } 398 break; 399 400 case UINTP: 401 s->reg[I_(UINTP)] &= ~val; 402 s->reg[I_(UINTSP)] &= ~val; 403 PRINT_DEBUG("UART%d: UINTP [%04x] have been cleared: %08x\n", 404 s->channel, offset, s->reg[I_(UINTP)]); 405 exynos4210_uart_update_irq(s); 406 break; 407 case UTRSTAT: 408 case UERSTAT: 409 case UFSTAT: 410 case UMSTAT: 411 case URXH: 412 PRINT_DEBUG("UART%d: Trying to write into RO register: %s [%04x]\n", 413 s->channel, exynos4210_uart_regname(offset), offset); 414 break; 415 case UINTSP: 416 s->reg[I_(UINTSP)] &= ~val; 417 break; 418 case UINTM: 419 s->reg[I_(UINTM)] = val; 420 exynos4210_uart_update_irq(s); 421 break; 422 case UCON: 423 case UMCON: 424 default: 425 s->reg[I_(offset)] = val; 426 break; 427 } 428 } 429 static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset, 430 unsigned size) 431 { 432 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 433 uint32_t res; 434 435 switch (offset) { 436 case UERSTAT: /* Read Only */ 437 res = s->reg[I_(UERSTAT)]; 438 s->reg[I_(UERSTAT)] = 0; 439 return res; 440 case UFSTAT: /* Read Only */ 441 s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff; 442 if (fifo_empty_elements_number(&s->rx) == 0) { 443 s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL; 444 s->reg[I_(UFSTAT)] &= ~0xff; 445 } 446 return s->reg[I_(UFSTAT)]; 447 case URXH: 448 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 449 if (fifo_elements_number(&s->rx)) { 450 res = fifo_retrieve(&s->rx); 451 #if DEBUG_Rx_DATA 452 fprintf(stderr, "%c", res); 453 #endif 454 if (!fifo_elements_number(&s->rx)) { 455 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 456 } else { 457 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 458 } 459 } else { 460 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 461 exynos4210_uart_update_irq(s); 462 res = 0; 463 } 464 } else { 465 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY; 466 res = s->reg[I_(URXH)]; 467 } 468 return res; 469 case UTXH: 470 PRINT_DEBUG("UART%d: Trying to read from WO register: %s [%04x]\n", 471 s->channel, exynos4210_uart_regname(offset), offset); 472 break; 473 default: 474 return s->reg[I_(offset)]; 475 } 476 477 return 0; 478 } 479 480 static const MemoryRegionOps exynos4210_uart_ops = { 481 .read = exynos4210_uart_read, 482 .write = exynos4210_uart_write, 483 .endianness = DEVICE_NATIVE_ENDIAN, 484 .valid = { 485 .max_access_size = 4, 486 .unaligned = false 487 }, 488 }; 489 490 static int exynos4210_uart_can_receive(void *opaque) 491 { 492 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 493 494 return fifo_empty_elements_number(&s->rx); 495 } 496 497 498 static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size) 499 { 500 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 501 int i; 502 503 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) { 504 if (fifo_empty_elements_number(&s->rx) < size) { 505 for (i = 0; i < fifo_empty_elements_number(&s->rx); i++) { 506 fifo_store(&s->rx, buf[i]); 507 } 508 s->reg[I_(UINTSP)] |= UINTSP_ERROR; 509 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 510 } else { 511 for (i = 0; i < size; i++) { 512 fifo_store(&s->rx, buf[i]); 513 } 514 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 515 } 516 /* XXX: Around here we maybe should check Rx trigger level */ 517 s->reg[I_(UINTSP)] |= UINTSP_RXD; 518 } else { 519 s->reg[I_(URXH)] = buf[0]; 520 s->reg[I_(UINTSP)] |= UINTSP_RXD; 521 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY; 522 } 523 524 exynos4210_uart_update_irq(s); 525 } 526 527 528 static void exynos4210_uart_event(void *opaque, int event) 529 { 530 Exynos4210UartState *s = (Exynos4210UartState *)opaque; 531 532 if (event == CHR_EVENT_BREAK) { 533 /* When the RxDn is held in logic 0, then a null byte is pushed into the 534 * fifo */ 535 fifo_store(&s->rx, '\0'); 536 s->reg[I_(UERSTAT)] |= UERSTAT_BREAK; 537 exynos4210_uart_update_irq(s); 538 } 539 } 540 541 542 static void exynos4210_uart_reset(DeviceState *dev) 543 { 544 Exynos4210UartState *s = EXYNOS4210_UART(dev); 545 int i; 546 547 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { 548 s->reg[I_(exynos4210_uart_regs[i].offset)] = 549 exynos4210_uart_regs[i].reset_value; 550 } 551 552 fifo_reset(&s->rx); 553 fifo_reset(&s->tx); 554 555 PRINT_DEBUG("UART%d: Rx FIFO size: %d\n", s->channel, s->rx.size); 556 } 557 558 static const VMStateDescription vmstate_exynos4210_uart_fifo = { 559 .name = "exynos4210.uart.fifo", 560 .version_id = 1, 561 .minimum_version_id = 1, 562 .fields = (VMStateField[]) { 563 VMSTATE_UINT32(sp, Exynos4210UartFIFO), 564 VMSTATE_UINT32(rp, Exynos4210UartFIFO), 565 VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, size), 566 VMSTATE_END_OF_LIST() 567 } 568 }; 569 570 static const VMStateDescription vmstate_exynos4210_uart = { 571 .name = "exynos4210.uart", 572 .version_id = 1, 573 .minimum_version_id = 1, 574 .fields = (VMStateField[]) { 575 VMSTATE_STRUCT(rx, Exynos4210UartState, 1, 576 vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO), 577 VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState, 578 EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)), 579 VMSTATE_END_OF_LIST() 580 } 581 }; 582 583 DeviceState *exynos4210_uart_create(hwaddr addr, 584 int fifo_size, 585 int channel, 586 Chardev *chr, 587 qemu_irq irq) 588 { 589 DeviceState *dev; 590 SysBusDevice *bus; 591 592 dev = qdev_create(NULL, TYPE_EXYNOS4210_UART); 593 594 qdev_prop_set_chr(dev, "chardev", chr); 595 qdev_prop_set_uint32(dev, "channel", channel); 596 qdev_prop_set_uint32(dev, "rx-size", fifo_size); 597 qdev_prop_set_uint32(dev, "tx-size", fifo_size); 598 599 bus = SYS_BUS_DEVICE(dev); 600 qdev_init_nofail(dev); 601 if (addr != (hwaddr)-1) { 602 sysbus_mmio_map(bus, 0, addr); 603 } 604 sysbus_connect_irq(bus, 0, irq); 605 606 return dev; 607 } 608 609 static void exynos4210_uart_init(Object *obj) 610 { 611 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 612 Exynos4210UartState *s = EXYNOS4210_UART(dev); 613 614 /* memory mapping */ 615 memory_region_init_io(&s->iomem, obj, &exynos4210_uart_ops, s, 616 "exynos4210.uart", EXYNOS4210_UART_REGS_MEM_SIZE); 617 sysbus_init_mmio(dev, &s->iomem); 618 619 sysbus_init_irq(dev, &s->irq); 620 } 621 622 static void exynos4210_uart_realize(DeviceState *dev, Error **errp) 623 { 624 Exynos4210UartState *s = EXYNOS4210_UART(dev); 625 626 qemu_chr_fe_set_handlers(&s->chr, exynos4210_uart_can_receive, 627 exynos4210_uart_receive, exynos4210_uart_event, 628 NULL, s, NULL, true); 629 } 630 631 static Property exynos4210_uart_properties[] = { 632 DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr), 633 DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0), 634 DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16), 635 DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16), 636 DEFINE_PROP_END_OF_LIST(), 637 }; 638 639 static void exynos4210_uart_class_init(ObjectClass *klass, void *data) 640 { 641 DeviceClass *dc = DEVICE_CLASS(klass); 642 643 dc->realize = exynos4210_uart_realize; 644 dc->reset = exynos4210_uart_reset; 645 dc->props = exynos4210_uart_properties; 646 dc->vmsd = &vmstate_exynos4210_uart; 647 } 648 649 static const TypeInfo exynos4210_uart_info = { 650 .name = TYPE_EXYNOS4210_UART, 651 .parent = TYPE_SYS_BUS_DEVICE, 652 .instance_size = sizeof(Exynos4210UartState), 653 .instance_init = exynos4210_uart_init, 654 .class_init = exynos4210_uart_class_init, 655 }; 656 657 static void exynos4210_uart_register(void) 658 { 659 type_register_static(&exynos4210_uart_info); 660 } 661 662 type_init(exynos4210_uart_register) 663