1 /*
2 * Exynos4210 UART Emulation
3 *
4 * Copyright (C) 2011 Samsung Electronics Co Ltd.
5 * Maksim Kozlov, <m.kozlov@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
15 * for more details.
16 *
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
19 *
20 */
21
22 #include "qemu/osdep.h"
23 #include "hw/sysbus.h"
24 #include "migration/vmstate.h"
25 #include "qapi/error.h"
26 #include "qemu/error-report.h"
27 #include "qemu/module.h"
28 #include "qemu/timer.h"
29 #include "chardev/char-fe.h"
30 #include "chardev/char-serial.h"
31
32 #include "hw/arm/exynos4210.h"
33 #include "hw/irq.h"
34 #include "hw/qdev-properties.h"
35 #include "hw/qdev-properties-system.h"
36
37 #include "trace.h"
38 #include "qom/object.h"
39
40 /*
41 * Offsets for UART registers relative to SFR base address
42 * for UARTn
43 *
44 */
45 #define ULCON 0x0000 /* Line Control */
46 #define UCON 0x0004 /* Control */
47 #define UFCON 0x0008 /* FIFO Control */
48 #define UMCON 0x000C /* Modem Control */
49 #define UTRSTAT 0x0010 /* Tx/Rx Status */
50 #define UERSTAT 0x0014 /* UART Error Status */
51 #define UFSTAT 0x0018 /* FIFO Status */
52 #define UMSTAT 0x001C /* Modem Status */
53 #define UTXH 0x0020 /* Transmit Buffer */
54 #define URXH 0x0024 /* Receive Buffer */
55 #define UBRDIV 0x0028 /* Baud Rate Divisor */
56 #define UFRACVAL 0x002C /* Divisor Fractional Value */
57 #define UINTP 0x0030 /* Interrupt Pending */
58 #define UINTSP 0x0034 /* Interrupt Source Pending */
59 #define UINTM 0x0038 /* Interrupt Mask */
60
61 /*
62 * for indexing register in the uint32_t array
63 *
64 * 'reg' - register offset (see offsets definitions above)
65 *
66 */
67 #define I_(reg) (reg / sizeof(uint32_t))
68
69 typedef struct Exynos4210UartReg {
70 const char *name; /* the only reason is the debug output */
71 hwaddr offset;
72 uint32_t reset_value;
73 } Exynos4210UartReg;
74
75 static const Exynos4210UartReg exynos4210_uart_regs[] = {
76 {"ULCON", ULCON, 0x00000000},
77 {"UCON", UCON, 0x00003000},
78 {"UFCON", UFCON, 0x00000000},
79 {"UMCON", UMCON, 0x00000000},
80 {"UTRSTAT", UTRSTAT, 0x00000006}, /* RO */
81 {"UERSTAT", UERSTAT, 0x00000000}, /* RO */
82 {"UFSTAT", UFSTAT, 0x00000000}, /* RO */
83 {"UMSTAT", UMSTAT, 0x00000000}, /* RO */
84 {"UTXH", UTXH, 0x5c5c5c5c}, /* WO, undefined reset value*/
85 {"URXH", URXH, 0x00000000}, /* RO */
86 {"UBRDIV", UBRDIV, 0x00000000},
87 {"UFRACVAL", UFRACVAL, 0x00000000},
88 {"UINTP", UINTP, 0x00000000},
89 {"UINTSP", UINTSP, 0x00000000},
90 {"UINTM", UINTM, 0x00000000},
91 };
92
93 #define EXYNOS4210_UART_REGS_MEM_SIZE 0x3C
94
95 /* UART FIFO Control */
96 #define UFCON_FIFO_ENABLE 0x1
97 #define UFCON_Rx_FIFO_RESET 0x2
98 #define UFCON_Tx_FIFO_RESET 0x4
99 #define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT 8
100 #define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT)
101 #define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT 4
102 #define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT)
103
104 /* Uart FIFO Status */
105 #define UFSTAT_Rx_FIFO_COUNT 0xff
106 #define UFSTAT_Rx_FIFO_FULL 0x100
107 #define UFSTAT_Rx_FIFO_ERROR 0x200
108 #define UFSTAT_Tx_FIFO_COUNT_SHIFT 16
109 #define UFSTAT_Tx_FIFO_COUNT (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT)
110 #define UFSTAT_Tx_FIFO_FULL_SHIFT 24
111 #define UFSTAT_Tx_FIFO_FULL (1 << UFSTAT_Tx_FIFO_FULL_SHIFT)
112
113 /* UART Interrupt Source Pending */
114 #define UINTSP_RXD 0x1 /* Receive interrupt */
115 #define UINTSP_ERROR 0x2 /* Error interrupt */
116 #define UINTSP_TXD 0x4 /* Transmit interrupt */
117 #define UINTSP_MODEM 0x8 /* Modem interrupt */
118
119 /* UART Line Control */
120 #define ULCON_IR_MODE_SHIFT 6
121 #define ULCON_PARITY_SHIFT 3
122 #define ULCON_STOP_BIT_SHIFT 1
123
124 /* UART Tx/Rx Status */
125 #define UTRSTAT_Rx_TIMEOUT 0x8
126 #define UTRSTAT_TRANSMITTER_EMPTY 0x4
127 #define UTRSTAT_Tx_BUFFER_EMPTY 0x2
128 #define UTRSTAT_Rx_BUFFER_DATA_READY 0x1
129
130 /* UART Error Status */
131 #define UERSTAT_OVERRUN 0x1
132 #define UERSTAT_PARITY 0x2
133 #define UERSTAT_FRAME 0x4
134 #define UERSTAT_BREAK 0x8
135
136 typedef struct {
137 uint8_t *data;
138 uint32_t sp, rp; /* store and retrieve pointers */
139 uint32_t size;
140 } Exynos4210UartFIFO;
141
142 #define TYPE_EXYNOS4210_UART "exynos4210.uart"
143 OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210UartState, EXYNOS4210_UART)
144
145 struct Exynos4210UartState {
146 SysBusDevice parent_obj;
147
148 MemoryRegion iomem;
149
150 uint32_t reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)];
151 Exynos4210UartFIFO rx;
152 Exynos4210UartFIFO tx;
153
154 QEMUTimer *fifo_timeout_timer;
155 uint64_t wordtime; /* word time in ns */
156
157 CharBackend chr;
158 qemu_irq irq;
159 qemu_irq dmairq;
160
161 uint32_t channel;
162
163 };
164
165
166 /* Used only for tracing */
exynos4210_uart_regname(hwaddr offset)167 static const char *exynos4210_uart_regname(hwaddr offset)
168 {
169
170 int i;
171
172 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) {
173 if (offset == exynos4210_uart_regs[i].offset) {
174 return exynos4210_uart_regs[i].name;
175 }
176 }
177
178 return NULL;
179 }
180
181
fifo_store(Exynos4210UartFIFO * q,uint8_t ch)182 static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch)
183 {
184 q->data[q->sp] = ch;
185 q->sp = (q->sp + 1) % q->size;
186 }
187
fifo_retrieve(Exynos4210UartFIFO * q)188 static uint8_t fifo_retrieve(Exynos4210UartFIFO *q)
189 {
190 uint8_t ret = q->data[q->rp];
191 q->rp = (q->rp + 1) % q->size;
192 return ret;
193 }
194
fifo_elements_number(const Exynos4210UartFIFO * q)195 static int fifo_elements_number(const Exynos4210UartFIFO *q)
196 {
197 if (q->sp < q->rp) {
198 return q->size - q->rp + q->sp;
199 }
200
201 return q->sp - q->rp;
202 }
203
fifo_empty_elements_number(const Exynos4210UartFIFO * q)204 static int fifo_empty_elements_number(const Exynos4210UartFIFO *q)
205 {
206 return q->size - fifo_elements_number(q);
207 }
208
fifo_reset(Exynos4210UartFIFO * q)209 static void fifo_reset(Exynos4210UartFIFO *q)
210 {
211 g_free(q->data);
212 q->data = NULL;
213
214 q->data = g_malloc0(q->size);
215
216 q->sp = 0;
217 q->rp = 0;
218 }
219
exynos4210_uart_FIFO_trigger_level(uint32_t channel,uint32_t reg)220 static uint32_t exynos4210_uart_FIFO_trigger_level(uint32_t channel,
221 uint32_t reg)
222 {
223 uint32_t level;
224
225 switch (channel) {
226 case 0:
227 level = reg * 32;
228 break;
229 case 1:
230 case 4:
231 level = reg * 8;
232 break;
233 case 2:
234 case 3:
235 level = reg * 2;
236 break;
237 default:
238 level = 0;
239 trace_exynos_uart_channel_error(channel);
240 break;
241 }
242 return level;
243 }
244
245 static uint32_t
exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState * s)246 exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState *s)
247 {
248 uint32_t reg;
249
250 reg = (s->reg[I_(UFCON)] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >>
251 UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT;
252
253 return exynos4210_uart_FIFO_trigger_level(s->channel, reg);
254 }
255
256 static uint32_t
exynos4210_uart_Rx_FIFO_trigger_level(const Exynos4210UartState * s)257 exynos4210_uart_Rx_FIFO_trigger_level(const Exynos4210UartState *s)
258 {
259 uint32_t reg;
260
261 reg = ((s->reg[I_(UFCON)] & UFCON_Rx_FIFO_TRIGGER_LEVEL) >>
262 UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT) + 1;
263
264 return exynos4210_uart_FIFO_trigger_level(s->channel, reg);
265 }
266
267 /*
268 * Update Rx DMA busy signal if Rx DMA is enabled. For simplicity,
269 * mark DMA as busy if DMA is enabled and the receive buffer is empty.
270 */
exynos4210_uart_update_dmabusy(Exynos4210UartState * s)271 static void exynos4210_uart_update_dmabusy(Exynos4210UartState *s)
272 {
273 bool rx_dma_enabled = (s->reg[I_(UCON)] & 0x03) == 0x02;
274 uint32_t count = fifo_elements_number(&s->rx);
275
276 if (rx_dma_enabled && !count) {
277 qemu_irq_raise(s->dmairq);
278 trace_exynos_uart_dmabusy(s->channel);
279 } else {
280 qemu_irq_lower(s->dmairq);
281 trace_exynos_uart_dmaready(s->channel);
282 }
283 }
284
exynos4210_uart_update_irq(Exynos4210UartState * s)285 static void exynos4210_uart_update_irq(Exynos4210UartState *s)
286 {
287 /*
288 * The Tx interrupt is always requested if the number of data in the
289 * transmit FIFO is smaller than the trigger level.
290 */
291 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
292 uint32_t count = (s->reg[I_(UFSTAT)] & UFSTAT_Tx_FIFO_COUNT) >>
293 UFSTAT_Tx_FIFO_COUNT_SHIFT;
294
295 if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) {
296 s->reg[I_(UINTSP)] |= UINTSP_TXD;
297 }
298
299 /*
300 * Rx interrupt if trigger level is reached or if rx timeout
301 * interrupt is disabled and there is data in the receive buffer
302 */
303 count = fifo_elements_number(&s->rx);
304 if ((count && !(s->reg[I_(UCON)] & 0x80)) ||
305 count >= exynos4210_uart_Rx_FIFO_trigger_level(s)) {
306 exynos4210_uart_update_dmabusy(s);
307 s->reg[I_(UINTSP)] |= UINTSP_RXD;
308 timer_del(s->fifo_timeout_timer);
309 }
310 } else if (s->reg[I_(UTRSTAT)] & UTRSTAT_Rx_BUFFER_DATA_READY) {
311 exynos4210_uart_update_dmabusy(s);
312 s->reg[I_(UINTSP)] |= UINTSP_RXD;
313 }
314
315 s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)];
316
317 if (s->reg[I_(UINTP)]) {
318 qemu_irq_raise(s->irq);
319 trace_exynos_uart_irq_raised(s->channel, s->reg[I_(UINTP)]);
320 } else {
321 qemu_irq_lower(s->irq);
322 trace_exynos_uart_irq_lowered(s->channel);
323 }
324 }
325
exynos4210_uart_timeout_int(void * opaque)326 static void exynos4210_uart_timeout_int(void *opaque)
327 {
328 Exynos4210UartState *s = opaque;
329
330 trace_exynos_uart_rx_timeout(s->channel, s->reg[I_(UTRSTAT)],
331 s->reg[I_(UINTSP)]);
332
333 if ((s->reg[I_(UTRSTAT)] & UTRSTAT_Rx_BUFFER_DATA_READY) ||
334 (s->reg[I_(UCON)] & (1 << 11))) {
335 s->reg[I_(UINTSP)] |= UINTSP_RXD;
336 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_TIMEOUT;
337 exynos4210_uart_update_dmabusy(s);
338 exynos4210_uart_update_irq(s);
339 }
340 }
341
exynos4210_uart_update_parameters(Exynos4210UartState * s)342 static void exynos4210_uart_update_parameters(Exynos4210UartState *s)
343 {
344 int speed, parity, data_bits, stop_bits;
345 QEMUSerialSetParams ssp;
346 uint64_t uclk_rate;
347
348 if (s->reg[I_(UBRDIV)] == 0) {
349 return;
350 }
351
352 if (s->reg[I_(ULCON)] & 0x20) {
353 if (s->reg[I_(ULCON)] & 0x28) {
354 parity = 'E';
355 } else {
356 parity = 'O';
357 }
358 } else {
359 parity = 'N';
360 }
361
362 if (s->reg[I_(ULCON)] & 0x4) {
363 stop_bits = 2;
364 } else {
365 stop_bits = 1;
366 }
367
368 data_bits = (s->reg[I_(ULCON)] & 0x3) + 5;
369
370 uclk_rate = 24000000;
371
372 speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) +
373 (s->reg[I_(UFRACVAL)] & 0x7) + 16);
374
375 ssp.speed = speed;
376 ssp.parity = parity;
377 ssp.data_bits = data_bits;
378 ssp.stop_bits = stop_bits;
379
380 s->wordtime = NANOSECONDS_PER_SECOND * (data_bits + stop_bits + 1) / speed;
381
382 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
383
384 trace_exynos_uart_update_params(
385 s->channel, speed, parity, data_bits, stop_bits, s->wordtime);
386 }
387
exynos4210_uart_rx_timeout_set(Exynos4210UartState * s)388 static void exynos4210_uart_rx_timeout_set(Exynos4210UartState *s)
389 {
390 if (s->reg[I_(UCON)] & 0x80) {
391 uint32_t timeout = ((s->reg[I_(UCON)] >> 12) & 0x0f) * s->wordtime;
392
393 timer_mod(s->fifo_timeout_timer,
394 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + timeout);
395 } else {
396 timer_del(s->fifo_timeout_timer);
397 }
398 }
399
exynos4210_uart_write(void * opaque,hwaddr offset,uint64_t val,unsigned size)400 static void exynos4210_uart_write(void *opaque, hwaddr offset,
401 uint64_t val, unsigned size)
402 {
403 Exynos4210UartState *s = (Exynos4210UartState *)opaque;
404 uint8_t ch;
405
406 trace_exynos_uart_write(s->channel, offset,
407 exynos4210_uart_regname(offset), val);
408
409 switch (offset) {
410 case ULCON:
411 case UBRDIV:
412 case UFRACVAL:
413 s->reg[I_(offset)] = val;
414 exynos4210_uart_update_parameters(s);
415 break;
416 case UFCON:
417 s->reg[I_(UFCON)] = val;
418 if (val & UFCON_Rx_FIFO_RESET) {
419 fifo_reset(&s->rx);
420 s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET;
421 trace_exynos_uart_rx_fifo_reset(s->channel);
422 }
423 if (val & UFCON_Tx_FIFO_RESET) {
424 fifo_reset(&s->tx);
425 s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET;
426 trace_exynos_uart_tx_fifo_reset(s->channel);
427 }
428 break;
429
430 case UTXH:
431 if (qemu_chr_fe_backend_connected(&s->chr)) {
432 s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY |
433 UTRSTAT_Tx_BUFFER_EMPTY);
434 ch = (uint8_t)val;
435 /* XXX this blocks entire thread. Rewrite to use
436 * qemu_chr_fe_write and background I/O callbacks */
437 qemu_chr_fe_write_all(&s->chr, &ch, 1);
438 trace_exynos_uart_tx(s->channel, ch);
439 s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY |
440 UTRSTAT_Tx_BUFFER_EMPTY;
441 s->reg[I_(UINTSP)] |= UINTSP_TXD;
442 exynos4210_uart_update_irq(s);
443 }
444 break;
445
446 case UINTP:
447 s->reg[I_(UINTP)] &= ~val;
448 s->reg[I_(UINTSP)] &= ~val;
449 trace_exynos_uart_intclr(s->channel, s->reg[I_(UINTP)]);
450 exynos4210_uart_update_irq(s);
451 break;
452 case UTRSTAT:
453 if (val & UTRSTAT_Rx_TIMEOUT) {
454 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_TIMEOUT;
455 }
456 break;
457 case UERSTAT:
458 case UFSTAT:
459 case UMSTAT:
460 case URXH:
461 trace_exynos_uart_ro_write(
462 s->channel, exynos4210_uart_regname(offset), offset);
463 break;
464 case UINTSP:
465 s->reg[I_(UINTSP)] &= ~val;
466 break;
467 case UINTM:
468 s->reg[I_(UINTM)] = val;
469 exynos4210_uart_update_irq(s);
470 break;
471 case UCON:
472 case UMCON:
473 default:
474 s->reg[I_(offset)] = val;
475 break;
476 }
477 }
478
exynos4210_uart_read(void * opaque,hwaddr offset,unsigned size)479 static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset,
480 unsigned size)
481 {
482 Exynos4210UartState *s = (Exynos4210UartState *)opaque;
483 uint32_t res;
484
485 switch (offset) {
486 case UERSTAT: /* Read Only */
487 res = s->reg[I_(UERSTAT)];
488 s->reg[I_(UERSTAT)] = 0;
489 trace_exynos_uart_read(s->channel, offset,
490 exynos4210_uart_regname(offset), res);
491 return res;
492 case UFSTAT: /* Read Only */
493 s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff;
494 if (fifo_empty_elements_number(&s->rx) == 0) {
495 s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL;
496 s->reg[I_(UFSTAT)] &= ~0xff;
497 }
498 trace_exynos_uart_read(s->channel, offset,
499 exynos4210_uart_regname(offset),
500 s->reg[I_(UFSTAT)]);
501 return s->reg[I_(UFSTAT)];
502 case URXH:
503 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
504 if (fifo_elements_number(&s->rx)) {
505 res = fifo_retrieve(&s->rx);
506 trace_exynos_uart_rx(s->channel, res);
507 if (!fifo_elements_number(&s->rx)) {
508 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
509 } else {
510 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
511 }
512 } else {
513 trace_exynos_uart_rx_error(s->channel);
514 s->reg[I_(UINTSP)] |= UINTSP_ERROR;
515 exynos4210_uart_update_irq(s);
516 res = 0;
517 }
518 } else {
519 s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
520 res = s->reg[I_(URXH)];
521 }
522 qemu_chr_fe_accept_input(&s->chr);
523 exynos4210_uart_update_dmabusy(s);
524 trace_exynos_uart_read(s->channel, offset,
525 exynos4210_uart_regname(offset), res);
526 return res;
527 case UTXH:
528 trace_exynos_uart_wo_read(s->channel, exynos4210_uart_regname(offset),
529 offset);
530 break;
531 default:
532 trace_exynos_uart_read(s->channel, offset,
533 exynos4210_uart_regname(offset),
534 s->reg[I_(offset)]);
535 return s->reg[I_(offset)];
536 }
537
538 trace_exynos_uart_read(s->channel, offset, exynos4210_uart_regname(offset),
539 0);
540 return 0;
541 }
542
543 static const MemoryRegionOps exynos4210_uart_ops = {
544 .read = exynos4210_uart_read,
545 .write = exynos4210_uart_write,
546 .endianness = DEVICE_NATIVE_ENDIAN,
547 .valid = {
548 .max_access_size = 4,
549 .unaligned = false
550 },
551 };
552
exynos4210_uart_can_receive(void * opaque)553 static int exynos4210_uart_can_receive(void *opaque)
554 {
555 Exynos4210UartState *s = (Exynos4210UartState *)opaque;
556
557 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
558 return fifo_empty_elements_number(&s->rx);
559 } else {
560 return !(s->reg[I_(UTRSTAT)] & UTRSTAT_Rx_BUFFER_DATA_READY);
561 }
562 }
563
exynos4210_uart_receive(void * opaque,const uint8_t * buf,int size)564 static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size)
565 {
566 Exynos4210UartState *s = (Exynos4210UartState *)opaque;
567 int i;
568
569 if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
570 if (fifo_empty_elements_number(&s->rx) < size) {
571 size = fifo_empty_elements_number(&s->rx);
572 s->reg[I_(UINTSP)] |= UINTSP_ERROR;
573 }
574 for (i = 0; i < size; i++) {
575 fifo_store(&s->rx, buf[i]);
576 }
577 exynos4210_uart_rx_timeout_set(s);
578 } else {
579 s->reg[I_(URXH)] = buf[0];
580 }
581 s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
582
583 exynos4210_uart_update_irq(s);
584 }
585
586
exynos4210_uart_event(void * opaque,QEMUChrEvent event)587 static void exynos4210_uart_event(void *opaque, QEMUChrEvent event)
588 {
589 Exynos4210UartState *s = (Exynos4210UartState *)opaque;
590
591 if (event == CHR_EVENT_BREAK) {
592 /* When the RxDn is held in logic 0, then a null byte is pushed into the
593 * fifo */
594 fifo_store(&s->rx, '\0');
595 s->reg[I_(UERSTAT)] |= UERSTAT_BREAK;
596 exynos4210_uart_update_irq(s);
597 }
598 }
599
600
exynos4210_uart_reset(DeviceState * dev)601 static void exynos4210_uart_reset(DeviceState *dev)
602 {
603 Exynos4210UartState *s = EXYNOS4210_UART(dev);
604 int i;
605
606 for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) {
607 s->reg[I_(exynos4210_uart_regs[i].offset)] =
608 exynos4210_uart_regs[i].reset_value;
609 }
610
611 fifo_reset(&s->rx);
612 fifo_reset(&s->tx);
613
614 trace_exynos_uart_rxsize(s->channel, s->rx.size);
615 }
616
exynos4210_uart_post_load(void * opaque,int version_id)617 static int exynos4210_uart_post_load(void *opaque, int version_id)
618 {
619 Exynos4210UartState *s = (Exynos4210UartState *)opaque;
620
621 exynos4210_uart_update_parameters(s);
622 exynos4210_uart_rx_timeout_set(s);
623
624 return 0;
625 }
626
627 static const VMStateDescription vmstate_exynos4210_uart_fifo = {
628 .name = "exynos4210.uart.fifo",
629 .version_id = 1,
630 .minimum_version_id = 1,
631 .fields = (const VMStateField[]) {
632 VMSTATE_UINT32(sp, Exynos4210UartFIFO),
633 VMSTATE_UINT32(rp, Exynos4210UartFIFO),
634 VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, size),
635 VMSTATE_END_OF_LIST()
636 }
637 };
638
639 static const VMStateDescription vmstate_exynos4210_uart = {
640 .name = "exynos4210.uart",
641 .version_id = 1,
642 .minimum_version_id = 1,
643 .post_load = exynos4210_uart_post_load,
644 .fields = (const VMStateField[]) {
645 VMSTATE_STRUCT(rx, Exynos4210UartState, 1,
646 vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO),
647 VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState,
648 EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)),
649 VMSTATE_END_OF_LIST()
650 }
651 };
652
exynos4210_uart_create(hwaddr addr,int fifo_size,int channel,Chardev * chr,qemu_irq irq)653 DeviceState *exynos4210_uart_create(hwaddr addr,
654 int fifo_size,
655 int channel,
656 Chardev *chr,
657 qemu_irq irq)
658 {
659 DeviceState *dev;
660 SysBusDevice *bus;
661
662 dev = qdev_new(TYPE_EXYNOS4210_UART);
663
664 qdev_prop_set_chr(dev, "chardev", chr);
665 qdev_prop_set_uint32(dev, "channel", channel);
666 qdev_prop_set_uint32(dev, "rx-size", fifo_size);
667 qdev_prop_set_uint32(dev, "tx-size", fifo_size);
668
669 bus = SYS_BUS_DEVICE(dev);
670 sysbus_realize_and_unref(bus, &error_fatal);
671 if (addr != (hwaddr)-1) {
672 sysbus_mmio_map(bus, 0, addr);
673 }
674 sysbus_connect_irq(bus, 0, irq);
675
676 return dev;
677 }
678
exynos4210_uart_init(Object * obj)679 static void exynos4210_uart_init(Object *obj)
680 {
681 SysBusDevice *dev = SYS_BUS_DEVICE(obj);
682 Exynos4210UartState *s = EXYNOS4210_UART(dev);
683
684 s->wordtime = NANOSECONDS_PER_SECOND * 10 / 9600;
685
686 /* memory mapping */
687 memory_region_init_io(&s->iomem, obj, &exynos4210_uart_ops, s,
688 "exynos4210.uart", EXYNOS4210_UART_REGS_MEM_SIZE);
689 sysbus_init_mmio(dev, &s->iomem);
690
691 sysbus_init_irq(dev, &s->irq);
692 sysbus_init_irq(dev, &s->dmairq);
693 }
694
exynos4210_uart_realize(DeviceState * dev,Error ** errp)695 static void exynos4210_uart_realize(DeviceState *dev, Error **errp)
696 {
697 Exynos4210UartState *s = EXYNOS4210_UART(dev);
698
699 s->fifo_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
700 exynos4210_uart_timeout_int, s);
701
702 qemu_chr_fe_set_handlers(&s->chr, exynos4210_uart_can_receive,
703 exynos4210_uart_receive, exynos4210_uart_event,
704 NULL, s, NULL, true);
705 }
706
707 static Property exynos4210_uart_properties[] = {
708 DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr),
709 DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0),
710 DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16),
711 DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16),
712 DEFINE_PROP_END_OF_LIST(),
713 };
714
exynos4210_uart_class_init(ObjectClass * klass,void * data)715 static void exynos4210_uart_class_init(ObjectClass *klass, void *data)
716 {
717 DeviceClass *dc = DEVICE_CLASS(klass);
718
719 dc->realize = exynos4210_uart_realize;
720 dc->reset = exynos4210_uart_reset;
721 device_class_set_props(dc, exynos4210_uart_properties);
722 dc->vmsd = &vmstate_exynos4210_uart;
723 }
724
725 static const TypeInfo exynos4210_uart_info = {
726 .name = TYPE_EXYNOS4210_UART,
727 .parent = TYPE_SYS_BUS_DEVICE,
728 .instance_size = sizeof(Exynos4210UartState),
729 .instance_init = exynos4210_uart_init,
730 .class_init = exynos4210_uart_class_init,
731 };
732
exynos4210_uart_register(void)733 static void exynos4210_uart_register(void)
734 {
735 type_register_static(&exynos4210_uart_info);
736 }
737
738 type_init(exynos4210_uart_register)
739