1 /* 2 * QEMU ETRAX System Emulator 3 * 4 * Copyright (c) 2007 Edgar E. Iglesias, Axis Communications AB. 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/sysbus.h" 27 #include "sysemu/char.h" 28 #include "qemu/log.h" 29 30 #define D(x) 31 32 #define RW_TR_CTRL (0x00 / 4) 33 #define RW_TR_DMA_EN (0x04 / 4) 34 #define RW_REC_CTRL (0x08 / 4) 35 #define RW_DOUT (0x1c / 4) 36 #define RS_STAT_DIN (0x20 / 4) 37 #define R_STAT_DIN (0x24 / 4) 38 #define RW_INTR_MASK (0x2c / 4) 39 #define RW_ACK_INTR (0x30 / 4) 40 #define R_INTR (0x34 / 4) 41 #define R_MASKED_INTR (0x38 / 4) 42 #define R_MAX (0x3c / 4) 43 44 #define STAT_DAV 16 45 #define STAT_TR_IDLE 22 46 #define STAT_TR_RDY 24 47 48 #define TYPE_ETRAX_FS_SERIAL "etraxfs,serial" 49 #define ETRAX_SERIAL(obj) \ 50 OBJECT_CHECK(ETRAXSerial, (obj), TYPE_ETRAX_FS_SERIAL) 51 52 typedef struct ETRAXSerial { 53 SysBusDevice parent_obj; 54 55 MemoryRegion mmio; 56 CharDriverState *chr; 57 qemu_irq irq; 58 59 int pending_tx; 60 61 uint8_t rx_fifo[16]; 62 unsigned int rx_fifo_pos; 63 unsigned int rx_fifo_len; 64 65 /* Control registers. */ 66 uint32_t regs[R_MAX]; 67 } ETRAXSerial; 68 69 static void ser_update_irq(ETRAXSerial *s) 70 { 71 72 if (s->rx_fifo_len) { 73 s->regs[R_INTR] |= 8; 74 } else { 75 s->regs[R_INTR] &= ~8; 76 } 77 78 s->regs[R_MASKED_INTR] = s->regs[R_INTR] & s->regs[RW_INTR_MASK]; 79 qemu_set_irq(s->irq, !!s->regs[R_MASKED_INTR]); 80 } 81 82 static uint64_t 83 ser_read(void *opaque, hwaddr addr, unsigned int size) 84 { 85 ETRAXSerial *s = opaque; 86 uint32_t r = 0; 87 88 addr >>= 2; 89 switch (addr) 90 { 91 case R_STAT_DIN: 92 r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15]; 93 if (s->rx_fifo_len) { 94 r |= 1 << STAT_DAV; 95 } 96 r |= 1 << STAT_TR_RDY; 97 r |= 1 << STAT_TR_IDLE; 98 break; 99 case RS_STAT_DIN: 100 r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15]; 101 if (s->rx_fifo_len) { 102 r |= 1 << STAT_DAV; 103 s->rx_fifo_len--; 104 } 105 r |= 1 << STAT_TR_RDY; 106 r |= 1 << STAT_TR_IDLE; 107 break; 108 default: 109 r = s->regs[addr]; 110 D(qemu_log("%s " TARGET_FMT_plx "=%x\n", __func__, addr, r)); 111 break; 112 } 113 return r; 114 } 115 116 static void 117 ser_write(void *opaque, hwaddr addr, 118 uint64_t val64, unsigned int size) 119 { 120 ETRAXSerial *s = opaque; 121 uint32_t value = val64; 122 unsigned char ch = val64; 123 124 D(qemu_log("%s " TARGET_FMT_plx "=%x\n", __func__, addr, value)); 125 addr >>= 2; 126 switch (addr) 127 { 128 case RW_DOUT: 129 qemu_chr_fe_write(s->chr, &ch, 1); 130 s->regs[R_INTR] |= 3; 131 s->pending_tx = 1; 132 s->regs[addr] = value; 133 break; 134 case RW_ACK_INTR: 135 if (s->pending_tx) { 136 value &= ~1; 137 s->pending_tx = 0; 138 D(qemu_log("fixedup value=%x r_intr=%x\n", 139 value, s->regs[R_INTR])); 140 } 141 s->regs[addr] = value; 142 s->regs[R_INTR] &= ~value; 143 D(printf("r_intr=%x\n", s->regs[R_INTR])); 144 break; 145 default: 146 s->regs[addr] = value; 147 break; 148 } 149 ser_update_irq(s); 150 } 151 152 static const MemoryRegionOps ser_ops = { 153 .read = ser_read, 154 .write = ser_write, 155 .endianness = DEVICE_NATIVE_ENDIAN, 156 .valid = { 157 .min_access_size = 4, 158 .max_access_size = 4 159 } 160 }; 161 162 static void serial_receive(void *opaque, const uint8_t *buf, int size) 163 { 164 ETRAXSerial *s = opaque; 165 int i; 166 167 /* Got a byte. */ 168 if (s->rx_fifo_len >= 16) { 169 D(qemu_log("WARNING: UART dropped char.\n")); 170 return; 171 } 172 173 for (i = 0; i < size; i++) { 174 s->rx_fifo[s->rx_fifo_pos] = buf[i]; 175 s->rx_fifo_pos++; 176 s->rx_fifo_pos &= 15; 177 s->rx_fifo_len++; 178 } 179 180 ser_update_irq(s); 181 } 182 183 static int serial_can_receive(void *opaque) 184 { 185 ETRAXSerial *s = opaque; 186 187 /* Is the receiver enabled? */ 188 if (!(s->regs[RW_REC_CTRL] & (1 << 3))) { 189 return 0; 190 } 191 192 return sizeof(s->rx_fifo) - s->rx_fifo_len; 193 } 194 195 static void serial_event(void *opaque, int event) 196 { 197 198 } 199 200 static void etraxfs_ser_reset(DeviceState *d) 201 { 202 ETRAXSerial *s = ETRAX_SERIAL(d); 203 204 /* transmitter begins ready and idle. */ 205 s->regs[RS_STAT_DIN] |= (1 << STAT_TR_RDY); 206 s->regs[RS_STAT_DIN] |= (1 << STAT_TR_IDLE); 207 208 s->regs[RW_REC_CTRL] = 0x10000; 209 210 } 211 212 static int etraxfs_ser_init(SysBusDevice *dev) 213 { 214 ETRAXSerial *s = ETRAX_SERIAL(dev); 215 216 sysbus_init_irq(dev, &s->irq); 217 memory_region_init_io(&s->mmio, OBJECT(s), &ser_ops, s, 218 "etraxfs-serial", R_MAX * 4); 219 sysbus_init_mmio(dev, &s->mmio); 220 221 /* FIXME use a qdev chardev prop instead of qemu_char_get_next_serial() */ 222 s->chr = qemu_char_get_next_serial(); 223 if (s->chr) { 224 qemu_chr_add_handlers(s->chr, 225 serial_can_receive, serial_receive, 226 serial_event, s); 227 } 228 return 0; 229 } 230 231 static void etraxfs_ser_class_init(ObjectClass *klass, void *data) 232 { 233 DeviceClass *dc = DEVICE_CLASS(klass); 234 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 235 236 k->init = etraxfs_ser_init; 237 dc->reset = etraxfs_ser_reset; 238 /* Reason: init() method uses qemu_char_get_next_serial() */ 239 dc->cannot_instantiate_with_device_add_yet = true; 240 } 241 242 static const TypeInfo etraxfs_ser_info = { 243 .name = TYPE_ETRAX_FS_SERIAL, 244 .parent = TYPE_SYS_BUS_DEVICE, 245 .instance_size = sizeof(ETRAXSerial), 246 .class_init = etraxfs_ser_class_init, 247 }; 248 249 static void etraxfs_serial_register_types(void) 250 { 251 type_register_static(&etraxfs_ser_info); 252 } 253 254 type_init(etraxfs_serial_register_types) 255