xref: /openbmc/qemu/hw/char/etraxfs_ser.c (revision 9944d320)
1 /*
2  * QEMU ETRAX System Emulator
3  *
4  * Copyright (c) 2007 Edgar E. Iglesias, Axis Communications AB.
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 
25 #include "hw/sysbus.h"
26 #include "char/char.h"
27 #include "qemu/log.h"
28 
29 #define D(x)
30 
31 #define RW_TR_CTRL     (0x00 / 4)
32 #define RW_TR_DMA_EN   (0x04 / 4)
33 #define RW_REC_CTRL    (0x08 / 4)
34 #define RW_DOUT        (0x1c / 4)
35 #define RS_STAT_DIN    (0x20 / 4)
36 #define R_STAT_DIN     (0x24 / 4)
37 #define RW_INTR_MASK   (0x2c / 4)
38 #define RW_ACK_INTR    (0x30 / 4)
39 #define R_INTR         (0x34 / 4)
40 #define R_MASKED_INTR  (0x38 / 4)
41 #define R_MAX          (0x3c / 4)
42 
43 #define STAT_DAV     16
44 #define STAT_TR_IDLE 22
45 #define STAT_TR_RDY  24
46 
47 struct etrax_serial
48 {
49     SysBusDevice busdev;
50     MemoryRegion mmio;
51     CharDriverState *chr;
52     qemu_irq irq;
53 
54     int pending_tx;
55 
56     uint8_t rx_fifo[16];
57     unsigned int rx_fifo_pos;
58     unsigned int rx_fifo_len;
59 
60     /* Control registers.  */
61     uint32_t regs[R_MAX];
62 };
63 
64 static void ser_update_irq(struct etrax_serial *s)
65 {
66 
67     if (s->rx_fifo_len) {
68         s->regs[R_INTR] |= 8;
69     } else {
70         s->regs[R_INTR] &= ~8;
71     }
72 
73     s->regs[R_MASKED_INTR] = s->regs[R_INTR] & s->regs[RW_INTR_MASK];
74     qemu_set_irq(s->irq, !!s->regs[R_MASKED_INTR]);
75 }
76 
77 static uint64_t
78 ser_read(void *opaque, hwaddr addr, unsigned int size)
79 {
80     struct etrax_serial *s = opaque;
81     uint32_t r = 0;
82 
83     addr >>= 2;
84     switch (addr)
85     {
86         case R_STAT_DIN:
87             r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15];
88             if (s->rx_fifo_len) {
89                 r |= 1 << STAT_DAV;
90             }
91             r |= 1 << STAT_TR_RDY;
92             r |= 1 << STAT_TR_IDLE;
93             break;
94         case RS_STAT_DIN:
95             r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15];
96             if (s->rx_fifo_len) {
97                 r |= 1 << STAT_DAV;
98                 s->rx_fifo_len--;
99             }
100             r |= 1 << STAT_TR_RDY;
101             r |= 1 << STAT_TR_IDLE;
102             break;
103         default:
104             r = s->regs[addr];
105             D(qemu_log("%s " TARGET_FMT_plx "=%x\n", __func__, addr, r));
106             break;
107     }
108     return r;
109 }
110 
111 static void
112 ser_write(void *opaque, hwaddr addr,
113           uint64_t val64, unsigned int size)
114 {
115     struct etrax_serial *s = opaque;
116     uint32_t value = val64;
117     unsigned char ch = val64;
118 
119     D(qemu_log("%s " TARGET_FMT_plx "=%x\n",  __func__, addr, value));
120     addr >>= 2;
121     switch (addr)
122     {
123         case RW_DOUT:
124             qemu_chr_fe_write(s->chr, &ch, 1);
125             s->regs[R_INTR] |= 3;
126             s->pending_tx = 1;
127             s->regs[addr] = value;
128             break;
129         case RW_ACK_INTR:
130             if (s->pending_tx) {
131                 value &= ~1;
132                 s->pending_tx = 0;
133                 D(qemu_log("fixedup value=%x r_intr=%x\n",
134                            value, s->regs[R_INTR]));
135             }
136             s->regs[addr] = value;
137             s->regs[R_INTR] &= ~value;
138             D(printf("r_intr=%x\n", s->regs[R_INTR]));
139             break;
140         default:
141             s->regs[addr] = value;
142             break;
143     }
144     ser_update_irq(s);
145 }
146 
147 static const MemoryRegionOps ser_ops = {
148     .read = ser_read,
149     .write = ser_write,
150     .endianness = DEVICE_NATIVE_ENDIAN,
151     .valid = {
152         .min_access_size = 4,
153         .max_access_size = 4
154     }
155 };
156 
157 static void serial_receive(void *opaque, const uint8_t *buf, int size)
158 {
159     struct etrax_serial *s = opaque;
160     int i;
161 
162     /* Got a byte.  */
163     if (s->rx_fifo_len >= 16) {
164         qemu_log("WARNING: UART dropped char.\n");
165         return;
166     }
167 
168     for (i = 0; i < size; i++) {
169         s->rx_fifo[s->rx_fifo_pos] = buf[i];
170         s->rx_fifo_pos++;
171         s->rx_fifo_pos &= 15;
172         s->rx_fifo_len++;
173     }
174 
175     ser_update_irq(s);
176 }
177 
178 static int serial_can_receive(void *opaque)
179 {
180     struct etrax_serial *s = opaque;
181     int r;
182 
183     /* Is the receiver enabled?  */
184     if (!(s->regs[RW_REC_CTRL] & (1 << 3))) {
185         return 0;
186     }
187 
188     r = sizeof(s->rx_fifo) - s->rx_fifo_len;
189     return r;
190 }
191 
192 static void serial_event(void *opaque, int event)
193 {
194 
195 }
196 
197 static void etraxfs_ser_reset(DeviceState *d)
198 {
199     struct etrax_serial *s = container_of(d, typeof(*s), busdev.qdev);
200 
201     /* transmitter begins ready and idle.  */
202     s->regs[RS_STAT_DIN] |= (1 << STAT_TR_RDY);
203     s->regs[RS_STAT_DIN] |= (1 << STAT_TR_IDLE);
204 
205     s->regs[RW_REC_CTRL] = 0x10000;
206 
207 }
208 
209 static int etraxfs_ser_init(SysBusDevice *dev)
210 {
211     struct etrax_serial *s = FROM_SYSBUS(typeof (*s), dev);
212 
213     sysbus_init_irq(dev, &s->irq);
214     memory_region_init_io(&s->mmio, &ser_ops, s, "etraxfs-serial", R_MAX * 4);
215     sysbus_init_mmio(dev, &s->mmio);
216 
217     s->chr = qemu_char_get_next_serial();
218     if (s->chr)
219         qemu_chr_add_handlers(s->chr,
220                       serial_can_receive, serial_receive,
221                       serial_event, s);
222     return 0;
223 }
224 
225 static void etraxfs_ser_class_init(ObjectClass *klass, void *data)
226 {
227     DeviceClass *dc = DEVICE_CLASS(klass);
228     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
229 
230     k->init = etraxfs_ser_init;
231     dc->reset = etraxfs_ser_reset;
232 }
233 
234 static const TypeInfo etraxfs_ser_info = {
235     .name          = "etraxfs,serial",
236     .parent        = TYPE_SYS_BUS_DEVICE,
237     .instance_size = sizeof(struct etrax_serial),
238     .class_init    = etraxfs_ser_class_init,
239 };
240 
241 static void etraxfs_serial_register_types(void)
242 {
243     type_register_static(&etraxfs_ser_info);
244 }
245 
246 type_init(etraxfs_serial_register_types)
247