1 /* 2 * QEMU ETRAX System Emulator 3 * 4 * Copyright (c) 2007 Edgar E. Iglesias, Axis Communications AB. 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/irq.h" 27 #include "hw/qdev-properties.h" 28 #include "hw/sysbus.h" 29 #include "chardev/char-fe.h" 30 #include "qemu/log.h" 31 #include "qemu/module.h" 32 33 #define D(x) 34 35 #define RW_TR_CTRL (0x00 / 4) 36 #define RW_TR_DMA_EN (0x04 / 4) 37 #define RW_REC_CTRL (0x08 / 4) 38 #define RW_DOUT (0x1c / 4) 39 #define RS_STAT_DIN (0x20 / 4) 40 #define R_STAT_DIN (0x24 / 4) 41 #define RW_INTR_MASK (0x2c / 4) 42 #define RW_ACK_INTR (0x30 / 4) 43 #define R_INTR (0x34 / 4) 44 #define R_MASKED_INTR (0x38 / 4) 45 #define R_MAX (0x3c / 4) 46 47 #define STAT_DAV 16 48 #define STAT_TR_IDLE 22 49 #define STAT_TR_RDY 24 50 51 #define TYPE_ETRAX_FS_SERIAL "etraxfs,serial" 52 #define ETRAX_SERIAL(obj) \ 53 OBJECT_CHECK(ETRAXSerial, (obj), TYPE_ETRAX_FS_SERIAL) 54 55 typedef struct ETRAXSerial { 56 SysBusDevice parent_obj; 57 58 MemoryRegion mmio; 59 CharBackend chr; 60 qemu_irq irq; 61 62 int pending_tx; 63 64 uint8_t rx_fifo[16]; 65 unsigned int rx_fifo_pos; 66 unsigned int rx_fifo_len; 67 68 /* Control registers. */ 69 uint32_t regs[R_MAX]; 70 } ETRAXSerial; 71 72 static void ser_update_irq(ETRAXSerial *s) 73 { 74 75 if (s->rx_fifo_len) { 76 s->regs[R_INTR] |= 8; 77 } else { 78 s->regs[R_INTR] &= ~8; 79 } 80 81 s->regs[R_MASKED_INTR] = s->regs[R_INTR] & s->regs[RW_INTR_MASK]; 82 qemu_set_irq(s->irq, !!s->regs[R_MASKED_INTR]); 83 } 84 85 static uint64_t 86 ser_read(void *opaque, hwaddr addr, unsigned int size) 87 { 88 ETRAXSerial *s = opaque; 89 uint32_t r = 0; 90 91 addr >>= 2; 92 switch (addr) 93 { 94 case R_STAT_DIN: 95 r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15]; 96 if (s->rx_fifo_len) { 97 r |= 1 << STAT_DAV; 98 } 99 r |= 1 << STAT_TR_RDY; 100 r |= 1 << STAT_TR_IDLE; 101 break; 102 case RS_STAT_DIN: 103 r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15]; 104 if (s->rx_fifo_len) { 105 r |= 1 << STAT_DAV; 106 s->rx_fifo_len--; 107 } 108 r |= 1 << STAT_TR_RDY; 109 r |= 1 << STAT_TR_IDLE; 110 break; 111 default: 112 r = s->regs[addr]; 113 D(qemu_log("%s " TARGET_FMT_plx "=%x\n", __func__, addr, r)); 114 break; 115 } 116 return r; 117 } 118 119 static void 120 ser_write(void *opaque, hwaddr addr, 121 uint64_t val64, unsigned int size) 122 { 123 ETRAXSerial *s = opaque; 124 uint32_t value = val64; 125 unsigned char ch = val64; 126 127 D(qemu_log("%s " TARGET_FMT_plx "=%x\n", __func__, addr, value)); 128 addr >>= 2; 129 switch (addr) 130 { 131 case RW_DOUT: 132 /* XXX this blocks entire thread. Rewrite to use 133 * qemu_chr_fe_write and background I/O callbacks */ 134 qemu_chr_fe_write_all(&s->chr, &ch, 1); 135 s->regs[R_INTR] |= 3; 136 s->pending_tx = 1; 137 s->regs[addr] = value; 138 break; 139 case RW_ACK_INTR: 140 if (s->pending_tx) { 141 value &= ~1; 142 s->pending_tx = 0; 143 D(qemu_log("fixedup value=%x r_intr=%x\n", 144 value, s->regs[R_INTR])); 145 } 146 s->regs[addr] = value; 147 s->regs[R_INTR] &= ~value; 148 D(printf("r_intr=%x\n", s->regs[R_INTR])); 149 break; 150 default: 151 s->regs[addr] = value; 152 break; 153 } 154 ser_update_irq(s); 155 } 156 157 static const MemoryRegionOps ser_ops = { 158 .read = ser_read, 159 .write = ser_write, 160 .endianness = DEVICE_NATIVE_ENDIAN, 161 .valid = { 162 .min_access_size = 4, 163 .max_access_size = 4 164 } 165 }; 166 167 static Property etraxfs_ser_properties[] = { 168 DEFINE_PROP_CHR("chardev", ETRAXSerial, chr), 169 DEFINE_PROP_END_OF_LIST(), 170 }; 171 172 static void serial_receive(void *opaque, const uint8_t *buf, int size) 173 { 174 ETRAXSerial *s = opaque; 175 int i; 176 177 /* Got a byte. */ 178 if (s->rx_fifo_len >= 16) { 179 D(qemu_log("WARNING: UART dropped char.\n")); 180 return; 181 } 182 183 for (i = 0; i < size; i++) { 184 s->rx_fifo[s->rx_fifo_pos] = buf[i]; 185 s->rx_fifo_pos++; 186 s->rx_fifo_pos &= 15; 187 s->rx_fifo_len++; 188 } 189 190 ser_update_irq(s); 191 } 192 193 static int serial_can_receive(void *opaque) 194 { 195 ETRAXSerial *s = opaque; 196 197 /* Is the receiver enabled? */ 198 if (!(s->regs[RW_REC_CTRL] & (1 << 3))) { 199 return 0; 200 } 201 202 return sizeof(s->rx_fifo) - s->rx_fifo_len; 203 } 204 205 static void serial_event(void *opaque, int event) 206 { 207 208 } 209 210 static void etraxfs_ser_reset(DeviceState *d) 211 { 212 ETRAXSerial *s = ETRAX_SERIAL(d); 213 214 /* transmitter begins ready and idle. */ 215 s->regs[RS_STAT_DIN] |= (1 << STAT_TR_RDY); 216 s->regs[RS_STAT_DIN] |= (1 << STAT_TR_IDLE); 217 218 s->regs[RW_REC_CTRL] = 0x10000; 219 220 } 221 222 static void etraxfs_ser_init(Object *obj) 223 { 224 ETRAXSerial *s = ETRAX_SERIAL(obj); 225 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 226 227 sysbus_init_irq(dev, &s->irq); 228 memory_region_init_io(&s->mmio, obj, &ser_ops, s, 229 "etraxfs-serial", R_MAX * 4); 230 sysbus_init_mmio(dev, &s->mmio); 231 } 232 233 static void etraxfs_ser_realize(DeviceState *dev, Error **errp) 234 { 235 ETRAXSerial *s = ETRAX_SERIAL(dev); 236 237 qemu_chr_fe_set_handlers(&s->chr, 238 serial_can_receive, serial_receive, 239 serial_event, NULL, s, NULL, true); 240 } 241 242 static void etraxfs_ser_class_init(ObjectClass *klass, void *data) 243 { 244 DeviceClass *dc = DEVICE_CLASS(klass); 245 246 dc->reset = etraxfs_ser_reset; 247 dc->props = etraxfs_ser_properties; 248 dc->realize = etraxfs_ser_realize; 249 } 250 251 static const TypeInfo etraxfs_ser_info = { 252 .name = TYPE_ETRAX_FS_SERIAL, 253 .parent = TYPE_SYS_BUS_DEVICE, 254 .instance_size = sizeof(ETRAXSerial), 255 .instance_init = etraxfs_ser_init, 256 .class_init = etraxfs_ser_class_init, 257 }; 258 259 static void etraxfs_serial_register_types(void) 260 { 261 type_register_static(&etraxfs_ser_info); 262 } 263 264 type_init(etraxfs_serial_register_types) 265