1 /* 2 * QEMU ESCC (Z8030/Z8530/Z85C30/SCC/ESCC) serial port emulation 3 * 4 * Copyright (c) 2003-2005 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/irq.h" 27 #include "hw/qdev-properties.h" 28 #include "hw/sysbus.h" 29 #include "migration/vmstate.h" 30 #include "qemu/module.h" 31 #include "hw/char/escc.h" 32 #include "ui/console.h" 33 #include "trace.h" 34 35 /* 36 * Chipset docs: 37 * "Z80C30/Z85C30/Z80230/Z85230/Z85233 SCC/ESCC User Manual", 38 * http://www.zilog.com/docs/serial/scc_escc_um.pdf 39 * 40 * On Sparc32 this is the serial port, mouse and keyboard part of chip STP2001 41 * (Slave I/O), also produced as NCR89C105. See 42 * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt 43 * 44 * The serial ports implement full AMD AM8530 or Zilog Z8530 chips, 45 * mouse and keyboard ports don't implement all functions and they are 46 * only asynchronous. There is no DMA. 47 * 48 * Z85C30 is also used on PowerMacs and m68k Macs. 49 * 50 * There are some small differences between Sparc version (sunzilog) 51 * and PowerMac (pmac): 52 * Offset between control and data registers 53 * There is some kind of lockup bug, but we can ignore it 54 * CTS is inverted 55 * DMA on pmac using DBDMA chip 56 * pmac can do IRDA and faster rates, sunzilog can only do 38400 57 * pmac baud rate generator clock is 3.6864 MHz, sunzilog 4.9152 MHz 58 * 59 * Linux driver for m68k Macs is the same as for PowerMac (pmac_zilog), 60 * but registers are grouped by type and not by channel: 61 * channel is selected by bit 0 of the address (instead of bit 1) 62 * and register is selected by bit 1 of the address (instead of bit 0). 63 */ 64 65 /* 66 * Modifications: 67 * 2006-Aug-10 Igor Kovalenko : Renamed KBDQueue to SERIOQueue, implemented 68 * serial mouse queue. 69 * Implemented serial mouse protocol. 70 * 71 * 2010-May-23 Artyom Tarasenko: Reworked IUS logic 72 */ 73 74 #define CHN_C(s) ((s)->chn == escc_chn_b ? 'b' : 'a') 75 76 #define SERIAL_CTRL 0 77 #define SERIAL_DATA 1 78 79 #define W_CMD 0 80 #define CMD_PTR_MASK 0x07 81 #define CMD_CMD_MASK 0x38 82 #define CMD_HI 0x08 83 #define CMD_CLR_TXINT 0x28 84 #define CMD_CLR_IUS 0x38 85 #define W_INTR 1 86 #define INTR_INTALL 0x01 87 #define INTR_TXINT 0x02 88 #define INTR_RXMODEMSK 0x18 89 #define INTR_RXINT1ST 0x08 90 #define INTR_RXINTALL 0x10 91 #define W_IVEC 2 92 #define W_RXCTRL 3 93 #define RXCTRL_RXEN 0x01 94 #define W_TXCTRL1 4 95 #define TXCTRL1_PAREN 0x01 96 #define TXCTRL1_PAREV 0x02 97 #define TXCTRL1_1STOP 0x04 98 #define TXCTRL1_1HSTOP 0x08 99 #define TXCTRL1_2STOP 0x0c 100 #define TXCTRL1_STPMSK 0x0c 101 #define TXCTRL1_CLK1X 0x00 102 #define TXCTRL1_CLK16X 0x40 103 #define TXCTRL1_CLK32X 0x80 104 #define TXCTRL1_CLK64X 0xc0 105 #define TXCTRL1_CLKMSK 0xc0 106 #define W_TXCTRL2 5 107 #define TXCTRL2_TXEN 0x08 108 #define TXCTRL2_BITMSK 0x60 109 #define TXCTRL2_5BITS 0x00 110 #define TXCTRL2_7BITS 0x20 111 #define TXCTRL2_6BITS 0x40 112 #define TXCTRL2_8BITS 0x60 113 #define W_SYNC1 6 114 #define W_SYNC2 7 115 #define W_TXBUF 8 116 #define W_MINTR 9 117 #define MINTR_STATUSHI 0x10 118 #define MINTR_RST_MASK 0xc0 119 #define MINTR_RST_B 0x40 120 #define MINTR_RST_A 0x80 121 #define MINTR_RST_ALL 0xc0 122 #define W_MISC1 10 123 #define W_CLOCK 11 124 #define CLOCK_TRXC 0x08 125 #define W_BRGLO 12 126 #define W_BRGHI 13 127 #define W_MISC2 14 128 #define MISC2_PLLDIS 0x30 129 #define W_EXTINT 15 130 #define EXTINT_DCD 0x08 131 #define EXTINT_SYNCINT 0x10 132 #define EXTINT_CTSINT 0x20 133 #define EXTINT_TXUNDRN 0x40 134 #define EXTINT_BRKINT 0x80 135 136 #define R_STATUS 0 137 #define STATUS_RXAV 0x01 138 #define STATUS_ZERO 0x02 139 #define STATUS_TXEMPTY 0x04 140 #define STATUS_DCD 0x08 141 #define STATUS_SYNC 0x10 142 #define STATUS_CTS 0x20 143 #define STATUS_TXUNDRN 0x40 144 #define STATUS_BRK 0x80 145 #define R_SPEC 1 146 #define SPEC_ALLSENT 0x01 147 #define SPEC_BITS8 0x06 148 #define R_IVEC 2 149 #define IVEC_TXINTB 0x00 150 #define IVEC_LONOINT 0x06 151 #define IVEC_LORXINTA 0x0c 152 #define IVEC_LORXINTB 0x04 153 #define IVEC_LOTXINTA 0x08 154 #define IVEC_HINOINT 0x60 155 #define IVEC_HIRXINTA 0x30 156 #define IVEC_HIRXINTB 0x20 157 #define IVEC_HITXINTA 0x10 158 #define R_INTR 3 159 #define INTR_EXTINTB 0x01 160 #define INTR_TXINTB 0x02 161 #define INTR_RXINTB 0x04 162 #define INTR_EXTINTA 0x08 163 #define INTR_TXINTA 0x10 164 #define INTR_RXINTA 0x20 165 #define R_IPEN 4 166 #define R_TXCTRL1 5 167 #define R_TXCTRL2 6 168 #define R_BC 7 169 #define R_RXBUF 8 170 #define R_RXCTRL 9 171 #define R_MISC 10 172 #define R_MISC1 11 173 #define R_BRGLO 12 174 #define R_BRGHI 13 175 #define R_MISC1I 14 176 #define R_EXTINT 15 177 178 static void handle_kbd_command(ESCCChannelState *s, int val); 179 static int serial_can_receive(void *opaque); 180 static void serial_receive_byte(ESCCChannelState *s, int ch); 181 182 static int reg_shift(ESCCState *s) 183 { 184 return s->bit_swap ? s->it_shift + 1 : s->it_shift; 185 } 186 187 static int chn_shift(ESCCState *s) 188 { 189 return s->bit_swap ? s->it_shift : s->it_shift + 1; 190 } 191 192 static void clear_queue(void *opaque) 193 { 194 ESCCChannelState *s = opaque; 195 ESCCSERIOQueue *q = &s->queue; 196 q->rptr = q->wptr = q->count = 0; 197 } 198 199 static void put_queue(void *opaque, int b) 200 { 201 ESCCChannelState *s = opaque; 202 ESCCSERIOQueue *q = &s->queue; 203 204 trace_escc_put_queue(CHN_C(s), b); 205 if (q->count >= ESCC_SERIO_QUEUE_SIZE) { 206 return; 207 } 208 q->data[q->wptr] = b; 209 if (++q->wptr == ESCC_SERIO_QUEUE_SIZE) { 210 q->wptr = 0; 211 } 212 q->count++; 213 serial_receive_byte(s, 0); 214 } 215 216 static uint32_t get_queue(void *opaque) 217 { 218 ESCCChannelState *s = opaque; 219 ESCCSERIOQueue *q = &s->queue; 220 int val; 221 222 if (q->count == 0) { 223 return 0; 224 } else { 225 val = q->data[q->rptr]; 226 if (++q->rptr == ESCC_SERIO_QUEUE_SIZE) { 227 q->rptr = 0; 228 } 229 q->count--; 230 } 231 trace_escc_get_queue(CHN_C(s), val); 232 if (q->count > 0) 233 serial_receive_byte(s, 0); 234 return val; 235 } 236 237 static int escc_update_irq_chn(ESCCChannelState *s) 238 { 239 if ((((s->wregs[W_INTR] & INTR_TXINT) && (s->txint == 1)) || 240 // tx ints enabled, pending 241 ((((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINT1ST) || 242 ((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINTALL)) && 243 s->rxint == 1) || // rx ints enabled, pending 244 ((s->wregs[W_EXTINT] & EXTINT_BRKINT) && 245 (s->rregs[R_STATUS] & STATUS_BRK)))) { // break int e&p 246 return 1; 247 } 248 return 0; 249 } 250 251 static void escc_update_irq(ESCCChannelState *s) 252 { 253 int irq; 254 255 irq = escc_update_irq_chn(s); 256 irq |= escc_update_irq_chn(s->otherchn); 257 258 trace_escc_update_irq(irq); 259 qemu_set_irq(s->irq, irq); 260 } 261 262 static void escc_reset_chn(ESCCChannelState *s) 263 { 264 int i; 265 266 s->reg = 0; 267 for (i = 0; i < ESCC_SERIAL_REGS; i++) { 268 s->rregs[i] = 0; 269 s->wregs[i] = 0; 270 } 271 s->wregs[W_TXCTRL1] = TXCTRL1_1STOP; // 1X divisor, 1 stop bit, no parity 272 s->wregs[W_MINTR] = MINTR_RST_ALL; 273 s->wregs[W_CLOCK] = CLOCK_TRXC; // Synch mode tx clock = TRxC 274 s->wregs[W_MISC2] = MISC2_PLLDIS; // PLL disabled 275 s->wregs[W_EXTINT] = EXTINT_DCD | EXTINT_SYNCINT | EXTINT_CTSINT | 276 EXTINT_TXUNDRN | EXTINT_BRKINT; // Enable most interrupts 277 if (s->disabled) 278 s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_DCD | STATUS_SYNC | 279 STATUS_CTS | STATUS_TXUNDRN; 280 else 281 s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_TXUNDRN; 282 s->rregs[R_SPEC] = SPEC_BITS8 | SPEC_ALLSENT; 283 284 s->rx = s->tx = 0; 285 s->rxint = s->txint = 0; 286 s->rxint_under_svc = s->txint_under_svc = 0; 287 s->e0_mode = s->led_mode = s->caps_lock_mode = s->num_lock_mode = 0; 288 clear_queue(s); 289 } 290 291 static void escc_reset(DeviceState *d) 292 { 293 ESCCState *s = ESCC(d); 294 295 escc_reset_chn(&s->chn[0]); 296 escc_reset_chn(&s->chn[1]); 297 } 298 299 static inline void set_rxint(ESCCChannelState *s) 300 { 301 s->rxint = 1; 302 /* XXX: missing daisy chainnig: escc_chn_b rx should have a lower priority 303 than chn_a rx/tx/special_condition service*/ 304 s->rxint_under_svc = 1; 305 if (s->chn == escc_chn_a) { 306 s->rregs[R_INTR] |= INTR_RXINTA; 307 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 308 s->otherchn->rregs[R_IVEC] = IVEC_HIRXINTA; 309 else 310 s->otherchn->rregs[R_IVEC] = IVEC_LORXINTA; 311 } else { 312 s->otherchn->rregs[R_INTR] |= INTR_RXINTB; 313 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 314 s->rregs[R_IVEC] = IVEC_HIRXINTB; 315 else 316 s->rregs[R_IVEC] = IVEC_LORXINTB; 317 } 318 escc_update_irq(s); 319 } 320 321 static inline void set_txint(ESCCChannelState *s) 322 { 323 s->txint = 1; 324 if (!s->rxint_under_svc) { 325 s->txint_under_svc = 1; 326 if (s->chn == escc_chn_a) { 327 if (s->wregs[W_INTR] & INTR_TXINT) { 328 s->rregs[R_INTR] |= INTR_TXINTA; 329 } 330 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 331 s->otherchn->rregs[R_IVEC] = IVEC_HITXINTA; 332 else 333 s->otherchn->rregs[R_IVEC] = IVEC_LOTXINTA; 334 } else { 335 s->rregs[R_IVEC] = IVEC_TXINTB; 336 if (s->wregs[W_INTR] & INTR_TXINT) { 337 s->otherchn->rregs[R_INTR] |= INTR_TXINTB; 338 } 339 } 340 escc_update_irq(s); 341 } 342 } 343 344 static inline void clr_rxint(ESCCChannelState *s) 345 { 346 s->rxint = 0; 347 s->rxint_under_svc = 0; 348 if (s->chn == escc_chn_a) { 349 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 350 s->otherchn->rregs[R_IVEC] = IVEC_HINOINT; 351 else 352 s->otherchn->rregs[R_IVEC] = IVEC_LONOINT; 353 s->rregs[R_INTR] &= ~INTR_RXINTA; 354 } else { 355 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 356 s->rregs[R_IVEC] = IVEC_HINOINT; 357 else 358 s->rregs[R_IVEC] = IVEC_LONOINT; 359 s->otherchn->rregs[R_INTR] &= ~INTR_RXINTB; 360 } 361 if (s->txint) 362 set_txint(s); 363 escc_update_irq(s); 364 } 365 366 static inline void clr_txint(ESCCChannelState *s) 367 { 368 s->txint = 0; 369 s->txint_under_svc = 0; 370 if (s->chn == escc_chn_a) { 371 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 372 s->otherchn->rregs[R_IVEC] = IVEC_HINOINT; 373 else 374 s->otherchn->rregs[R_IVEC] = IVEC_LONOINT; 375 s->rregs[R_INTR] &= ~INTR_TXINTA; 376 } else { 377 s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB; 378 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 379 s->rregs[R_IVEC] = IVEC_HINOINT; 380 else 381 s->rregs[R_IVEC] = IVEC_LONOINT; 382 s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB; 383 } 384 if (s->rxint) 385 set_rxint(s); 386 escc_update_irq(s); 387 } 388 389 static void escc_update_parameters(ESCCChannelState *s) 390 { 391 int speed, parity, data_bits, stop_bits; 392 QEMUSerialSetParams ssp; 393 394 if (!qemu_chr_fe_backend_connected(&s->chr) || s->type != escc_serial) 395 return; 396 397 if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREN) { 398 if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREV) 399 parity = 'E'; 400 else 401 parity = 'O'; 402 } else { 403 parity = 'N'; 404 } 405 if ((s->wregs[W_TXCTRL1] & TXCTRL1_STPMSK) == TXCTRL1_2STOP) 406 stop_bits = 2; 407 else 408 stop_bits = 1; 409 switch (s->wregs[W_TXCTRL2] & TXCTRL2_BITMSK) { 410 case TXCTRL2_5BITS: 411 data_bits = 5; 412 break; 413 case TXCTRL2_7BITS: 414 data_bits = 7; 415 break; 416 case TXCTRL2_6BITS: 417 data_bits = 6; 418 break; 419 default: 420 case TXCTRL2_8BITS: 421 data_bits = 8; 422 break; 423 } 424 speed = s->clock / ((s->wregs[W_BRGLO] | (s->wregs[W_BRGHI] << 8)) + 2); 425 switch (s->wregs[W_TXCTRL1] & TXCTRL1_CLKMSK) { 426 case TXCTRL1_CLK1X: 427 break; 428 case TXCTRL1_CLK16X: 429 speed /= 16; 430 break; 431 case TXCTRL1_CLK32X: 432 speed /= 32; 433 break; 434 default: 435 case TXCTRL1_CLK64X: 436 speed /= 64; 437 break; 438 } 439 ssp.speed = speed; 440 ssp.parity = parity; 441 ssp.data_bits = data_bits; 442 ssp.stop_bits = stop_bits; 443 trace_escc_update_parameters(CHN_C(s), speed, parity, data_bits, stop_bits); 444 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 445 } 446 447 static void escc_mem_write(void *opaque, hwaddr addr, 448 uint64_t val, unsigned size) 449 { 450 ESCCState *serial = opaque; 451 ESCCChannelState *s; 452 uint32_t saddr; 453 int newreg, channel; 454 455 val &= 0xff; 456 saddr = (addr >> reg_shift(serial)) & 1; 457 channel = (addr >> chn_shift(serial)) & 1; 458 s = &serial->chn[channel]; 459 switch (saddr) { 460 case SERIAL_CTRL: 461 trace_escc_mem_writeb_ctrl(CHN_C(s), s->reg, val & 0xff); 462 newreg = 0; 463 switch (s->reg) { 464 case W_CMD: 465 newreg = val & CMD_PTR_MASK; 466 val &= CMD_CMD_MASK; 467 switch (val) { 468 case CMD_HI: 469 newreg |= CMD_HI; 470 break; 471 case CMD_CLR_TXINT: 472 clr_txint(s); 473 break; 474 case CMD_CLR_IUS: 475 if (s->rxint_under_svc) { 476 s->rxint_under_svc = 0; 477 if (s->txint) { 478 set_txint(s); 479 } 480 } else if (s->txint_under_svc) { 481 s->txint_under_svc = 0; 482 } 483 escc_update_irq(s); 484 break; 485 default: 486 break; 487 } 488 break; 489 case W_INTR ... W_RXCTRL: 490 case W_SYNC1 ... W_TXBUF: 491 case W_MISC1 ... W_CLOCK: 492 case W_MISC2 ... W_EXTINT: 493 s->wregs[s->reg] = val; 494 break; 495 case W_TXCTRL1: 496 case W_TXCTRL2: 497 s->wregs[s->reg] = val; 498 escc_update_parameters(s); 499 break; 500 case W_BRGLO: 501 case W_BRGHI: 502 s->wregs[s->reg] = val; 503 s->rregs[s->reg] = val; 504 escc_update_parameters(s); 505 break; 506 case W_MINTR: 507 switch (val & MINTR_RST_MASK) { 508 case 0: 509 default: 510 break; 511 case MINTR_RST_B: 512 escc_reset_chn(&serial->chn[0]); 513 return; 514 case MINTR_RST_A: 515 escc_reset_chn(&serial->chn[1]); 516 return; 517 case MINTR_RST_ALL: 518 escc_reset(DEVICE(serial)); 519 return; 520 } 521 break; 522 default: 523 break; 524 } 525 if (s->reg == 0) 526 s->reg = newreg; 527 else 528 s->reg = 0; 529 break; 530 case SERIAL_DATA: 531 trace_escc_mem_writeb_data(CHN_C(s), val); 532 /* 533 * Lower the irq when data is written to the Tx buffer and no other 534 * interrupts are currently pending. The irq will be raised again once 535 * the Tx buffer becomes empty below. 536 */ 537 s->txint = 0; 538 escc_update_irq(s); 539 s->tx = val; 540 if (s->wregs[W_TXCTRL2] & TXCTRL2_TXEN) { // tx enabled 541 if (qemu_chr_fe_backend_connected(&s->chr)) { 542 /* XXX this blocks entire thread. Rewrite to use 543 * qemu_chr_fe_write and background I/O callbacks */ 544 qemu_chr_fe_write_all(&s->chr, &s->tx, 1); 545 } else if (s->type == escc_kbd && !s->disabled) { 546 handle_kbd_command(s, val); 547 } 548 } 549 s->rregs[R_STATUS] |= STATUS_TXEMPTY; // Tx buffer empty 550 s->rregs[R_SPEC] |= SPEC_ALLSENT; // All sent 551 set_txint(s); 552 break; 553 default: 554 break; 555 } 556 } 557 558 static uint64_t escc_mem_read(void *opaque, hwaddr addr, 559 unsigned size) 560 { 561 ESCCState *serial = opaque; 562 ESCCChannelState *s; 563 uint32_t saddr; 564 uint32_t ret; 565 int channel; 566 567 saddr = (addr >> reg_shift(serial)) & 1; 568 channel = (addr >> chn_shift(serial)) & 1; 569 s = &serial->chn[channel]; 570 switch (saddr) { 571 case SERIAL_CTRL: 572 trace_escc_mem_readb_ctrl(CHN_C(s), s->reg, s->rregs[s->reg]); 573 ret = s->rregs[s->reg]; 574 s->reg = 0; 575 return ret; 576 case SERIAL_DATA: 577 s->rregs[R_STATUS] &= ~STATUS_RXAV; 578 clr_rxint(s); 579 if (s->type == escc_kbd || s->type == escc_mouse) { 580 ret = get_queue(s); 581 } else { 582 ret = s->rx; 583 } 584 trace_escc_mem_readb_data(CHN_C(s), ret); 585 qemu_chr_fe_accept_input(&s->chr); 586 return ret; 587 default: 588 break; 589 } 590 return 0; 591 } 592 593 static const MemoryRegionOps escc_mem_ops = { 594 .read = escc_mem_read, 595 .write = escc_mem_write, 596 .endianness = DEVICE_NATIVE_ENDIAN, 597 .valid = { 598 .min_access_size = 1, 599 .max_access_size = 1, 600 }, 601 }; 602 603 static int serial_can_receive(void *opaque) 604 { 605 ESCCChannelState *s = opaque; 606 int ret; 607 608 if (((s->wregs[W_RXCTRL] & RXCTRL_RXEN) == 0) // Rx not enabled 609 || ((s->rregs[R_STATUS] & STATUS_RXAV) == STATUS_RXAV)) 610 // char already available 611 ret = 0; 612 else 613 ret = 1; 614 return ret; 615 } 616 617 static void serial_receive_byte(ESCCChannelState *s, int ch) 618 { 619 trace_escc_serial_receive_byte(CHN_C(s), ch); 620 s->rregs[R_STATUS] |= STATUS_RXAV; 621 s->rx = ch; 622 set_rxint(s); 623 } 624 625 static void serial_receive_break(ESCCChannelState *s) 626 { 627 s->rregs[R_STATUS] |= STATUS_BRK; 628 escc_update_irq(s); 629 } 630 631 static void serial_receive1(void *opaque, const uint8_t *buf, int size) 632 { 633 ESCCChannelState *s = opaque; 634 serial_receive_byte(s, buf[0]); 635 } 636 637 static void serial_event(void *opaque, QEMUChrEvent event) 638 { 639 ESCCChannelState *s = opaque; 640 if (event == CHR_EVENT_BREAK) 641 serial_receive_break(s); 642 } 643 644 static const VMStateDescription vmstate_escc_chn = { 645 .name ="escc_chn", 646 .version_id = 2, 647 .minimum_version_id = 1, 648 .fields = (VMStateField[]) { 649 VMSTATE_UINT32(vmstate_dummy, ESCCChannelState), 650 VMSTATE_UINT32(reg, ESCCChannelState), 651 VMSTATE_UINT32(rxint, ESCCChannelState), 652 VMSTATE_UINT32(txint, ESCCChannelState), 653 VMSTATE_UINT32(rxint_under_svc, ESCCChannelState), 654 VMSTATE_UINT32(txint_under_svc, ESCCChannelState), 655 VMSTATE_UINT8(rx, ESCCChannelState), 656 VMSTATE_UINT8(tx, ESCCChannelState), 657 VMSTATE_BUFFER(wregs, ESCCChannelState), 658 VMSTATE_BUFFER(rregs, ESCCChannelState), 659 VMSTATE_END_OF_LIST() 660 } 661 }; 662 663 static const VMStateDescription vmstate_escc = { 664 .name ="escc", 665 .version_id = 2, 666 .minimum_version_id = 1, 667 .fields = (VMStateField[]) { 668 VMSTATE_STRUCT_ARRAY(chn, ESCCState, 2, 2, vmstate_escc_chn, 669 ESCCChannelState), 670 VMSTATE_END_OF_LIST() 671 } 672 }; 673 674 static void sunkbd_handle_event(DeviceState *dev, QemuConsole *src, 675 InputEvent *evt) 676 { 677 ESCCChannelState *s = (ESCCChannelState *)dev; 678 int qcode, keycode; 679 InputKeyEvent *key; 680 681 assert(evt->type == INPUT_EVENT_KIND_KEY); 682 key = evt->u.key.data; 683 qcode = qemu_input_key_value_to_qcode(key->key); 684 trace_escc_sunkbd_event_in(qcode, QKeyCode_str(qcode), 685 key->down); 686 687 if (qcode == Q_KEY_CODE_CAPS_LOCK) { 688 if (key->down) { 689 s->caps_lock_mode ^= 1; 690 if (s->caps_lock_mode == 2) { 691 return; /* Drop second press */ 692 } 693 } else { 694 s->caps_lock_mode ^= 2; 695 if (s->caps_lock_mode == 3) { 696 return; /* Drop first release */ 697 } 698 } 699 } 700 701 if (qcode == Q_KEY_CODE_NUM_LOCK) { 702 if (key->down) { 703 s->num_lock_mode ^= 1; 704 if (s->num_lock_mode == 2) { 705 return; /* Drop second press */ 706 } 707 } else { 708 s->num_lock_mode ^= 2; 709 if (s->num_lock_mode == 3) { 710 return; /* Drop first release */ 711 } 712 } 713 } 714 715 if (qcode > qemu_input_map_qcode_to_sun_len) { 716 return; 717 } 718 719 keycode = qemu_input_map_qcode_to_sun[qcode]; 720 if (!key->down) { 721 keycode |= 0x80; 722 } 723 trace_escc_sunkbd_event_out(keycode); 724 put_queue(s, keycode); 725 } 726 727 static QemuInputHandler sunkbd_handler = { 728 .name = "sun keyboard", 729 .mask = INPUT_EVENT_MASK_KEY, 730 .event = sunkbd_handle_event, 731 }; 732 733 static void handle_kbd_command(ESCCChannelState *s, int val) 734 { 735 trace_escc_kbd_command(val); 736 if (s->led_mode) { // Ignore led byte 737 s->led_mode = 0; 738 return; 739 } 740 switch (val) { 741 case 1: // Reset, return type code 742 clear_queue(s); 743 put_queue(s, 0xff); 744 put_queue(s, 4); // Type 4 745 put_queue(s, 0x7f); 746 break; 747 case 0xe: // Set leds 748 s->led_mode = 1; 749 break; 750 case 7: // Query layout 751 case 0xf: 752 clear_queue(s); 753 put_queue(s, 0xfe); 754 put_queue(s, 0x21); /* en-us layout */ 755 break; 756 default: 757 break; 758 } 759 } 760 761 static void sunmouse_event(void *opaque, 762 int dx, int dy, int dz, int buttons_state) 763 { 764 ESCCChannelState *s = opaque; 765 int ch; 766 767 trace_escc_sunmouse_event(dx, dy, buttons_state); 768 ch = 0x80 | 0x7; /* protocol start byte, no buttons pressed */ 769 770 if (buttons_state & MOUSE_EVENT_LBUTTON) 771 ch ^= 0x4; 772 if (buttons_state & MOUSE_EVENT_MBUTTON) 773 ch ^= 0x2; 774 if (buttons_state & MOUSE_EVENT_RBUTTON) 775 ch ^= 0x1; 776 777 put_queue(s, ch); 778 779 ch = dx; 780 781 if (ch > 127) 782 ch = 127; 783 else if (ch < -127) 784 ch = -127; 785 786 put_queue(s, ch & 0xff); 787 788 ch = -dy; 789 790 if (ch > 127) 791 ch = 127; 792 else if (ch < -127) 793 ch = -127; 794 795 put_queue(s, ch & 0xff); 796 797 // MSC protocol specify two extra motion bytes 798 799 put_queue(s, 0); 800 put_queue(s, 0); 801 } 802 803 static void escc_init1(Object *obj) 804 { 805 ESCCState *s = ESCC(obj); 806 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 807 unsigned int i; 808 809 for (i = 0; i < 2; i++) { 810 sysbus_init_irq(dev, &s->chn[i].irq); 811 s->chn[i].chn = 1 - i; 812 } 813 s->chn[0].otherchn = &s->chn[1]; 814 s->chn[1].otherchn = &s->chn[0]; 815 816 sysbus_init_mmio(dev, &s->mmio); 817 } 818 819 static void escc_realize(DeviceState *dev, Error **errp) 820 { 821 ESCCState *s = ESCC(dev); 822 unsigned int i; 823 824 s->chn[0].disabled = s->disabled; 825 s->chn[1].disabled = s->disabled; 826 827 memory_region_init_io(&s->mmio, OBJECT(dev), &escc_mem_ops, s, "escc", 828 ESCC_SIZE << s->it_shift); 829 830 for (i = 0; i < 2; i++) { 831 if (qemu_chr_fe_backend_connected(&s->chn[i].chr)) { 832 s->chn[i].clock = s->frequency / 2; 833 qemu_chr_fe_set_handlers(&s->chn[i].chr, serial_can_receive, 834 serial_receive1, serial_event, NULL, 835 &s->chn[i], NULL, true); 836 } 837 } 838 839 if (s->chn[0].type == escc_mouse) { 840 qemu_add_mouse_event_handler(sunmouse_event, &s->chn[0], 0, 841 "QEMU Sun Mouse"); 842 } 843 if (s->chn[1].type == escc_kbd) { 844 s->chn[1].hs = qemu_input_handler_register((DeviceState *)(&s->chn[1]), 845 &sunkbd_handler); 846 } 847 } 848 849 static Property escc_properties[] = { 850 DEFINE_PROP_UINT32("frequency", ESCCState, frequency, 0), 851 DEFINE_PROP_UINT32("it_shift", ESCCState, it_shift, 0), 852 DEFINE_PROP_BOOL("bit_swap", ESCCState, bit_swap, false), 853 DEFINE_PROP_UINT32("disabled", ESCCState, disabled, 0), 854 DEFINE_PROP_UINT32("chnBtype", ESCCState, chn[0].type, 0), 855 DEFINE_PROP_UINT32("chnAtype", ESCCState, chn[1].type, 0), 856 DEFINE_PROP_CHR("chrB", ESCCState, chn[0].chr), 857 DEFINE_PROP_CHR("chrA", ESCCState, chn[1].chr), 858 DEFINE_PROP_END_OF_LIST(), 859 }; 860 861 static void escc_class_init(ObjectClass *klass, void *data) 862 { 863 DeviceClass *dc = DEVICE_CLASS(klass); 864 865 dc->reset = escc_reset; 866 dc->realize = escc_realize; 867 dc->vmsd = &vmstate_escc; 868 device_class_set_props(dc, escc_properties); 869 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 870 } 871 872 static const TypeInfo escc_info = { 873 .name = TYPE_ESCC, 874 .parent = TYPE_SYS_BUS_DEVICE, 875 .instance_size = sizeof(ESCCState), 876 .instance_init = escc_init1, 877 .class_init = escc_class_init, 878 }; 879 880 static void escc_register_types(void) 881 { 882 type_register_static(&escc_info); 883 } 884 885 type_init(escc_register_types) 886