1 /* 2 * QEMU ESCC (Z8030/Z8530/Z85C30/SCC/ESCC) serial port emulation 3 * 4 * Copyright (c) 2003-2005 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/hw.h" 27 #include "hw/sysbus.h" 28 #include "hw/char/escc.h" 29 #include "chardev/char-fe.h" 30 #include "chardev/char-serial.h" 31 #include "ui/console.h" 32 #include "ui/input.h" 33 #include "trace.h" 34 35 /* 36 * Chipset docs: 37 * "Z80C30/Z85C30/Z80230/Z85230/Z85233 SCC/ESCC User Manual", 38 * http://www.zilog.com/docs/serial/scc_escc_um.pdf 39 * 40 * On Sparc32 this is the serial port, mouse and keyboard part of chip STP2001 41 * (Slave I/O), also produced as NCR89C105. See 42 * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt 43 * 44 * The serial ports implement full AMD AM8530 or Zilog Z8530 chips, 45 * mouse and keyboard ports don't implement all functions and they are 46 * only asynchronous. There is no DMA. 47 * 48 * Z85C30 is also used on PowerMacs. There are some small differences 49 * between Sparc version (sunzilog) and PowerMac (pmac): 50 * Offset between control and data registers 51 * There is some kind of lockup bug, but we can ignore it 52 * CTS is inverted 53 * DMA on pmac using DBDMA chip 54 * pmac can do IRDA and faster rates, sunzilog can only do 38400 55 * pmac baud rate generator clock is 3.6864 MHz, sunzilog 4.9152 MHz 56 */ 57 58 /* 59 * Modifications: 60 * 2006-Aug-10 Igor Kovalenko : Renamed KBDQueue to SERIOQueue, implemented 61 * serial mouse queue. 62 * Implemented serial mouse protocol. 63 * 64 * 2010-May-23 Artyom Tarasenko: Reworked IUS logic 65 */ 66 67 typedef enum { 68 chn_a, chn_b, 69 } ChnID; 70 71 #define CHN_C(s) ((s)->chn == chn_b? 'b' : 'a') 72 73 typedef enum { 74 ser, kbd, mouse, 75 } ChnType; 76 77 #define SERIO_QUEUE_SIZE 256 78 79 typedef struct { 80 uint8_t data[SERIO_QUEUE_SIZE]; 81 int rptr, wptr, count; 82 } SERIOQueue; 83 84 #define SERIAL_REGS 16 85 typedef struct ChannelState { 86 qemu_irq irq; 87 uint32_t rxint, txint, rxint_under_svc, txint_under_svc; 88 struct ChannelState *otherchn; 89 uint32_t reg; 90 uint8_t wregs[SERIAL_REGS], rregs[SERIAL_REGS]; 91 SERIOQueue queue; 92 CharBackend chr; 93 int e0_mode, led_mode, caps_lock_mode, num_lock_mode; 94 int disabled; 95 int clock; 96 uint32_t vmstate_dummy; 97 ChnID chn; // this channel, A (base+4) or B (base+0) 98 ChnType type; 99 uint8_t rx, tx; 100 QemuInputHandlerState *hs; 101 } ChannelState; 102 103 #define ESCC(obj) OBJECT_CHECK(ESCCState, (obj), TYPE_ESCC) 104 105 typedef struct ESCCState { 106 SysBusDevice parent_obj; 107 108 struct ChannelState chn[2]; 109 uint32_t it_shift; 110 MemoryRegion mmio; 111 uint32_t disabled; 112 uint32_t frequency; 113 } ESCCState; 114 115 #define SERIAL_CTRL 0 116 #define SERIAL_DATA 1 117 118 #define W_CMD 0 119 #define CMD_PTR_MASK 0x07 120 #define CMD_CMD_MASK 0x38 121 #define CMD_HI 0x08 122 #define CMD_CLR_TXINT 0x28 123 #define CMD_CLR_IUS 0x38 124 #define W_INTR 1 125 #define INTR_INTALL 0x01 126 #define INTR_TXINT 0x02 127 #define INTR_RXMODEMSK 0x18 128 #define INTR_RXINT1ST 0x08 129 #define INTR_RXINTALL 0x10 130 #define W_IVEC 2 131 #define W_RXCTRL 3 132 #define RXCTRL_RXEN 0x01 133 #define W_TXCTRL1 4 134 #define TXCTRL1_PAREN 0x01 135 #define TXCTRL1_PAREV 0x02 136 #define TXCTRL1_1STOP 0x04 137 #define TXCTRL1_1HSTOP 0x08 138 #define TXCTRL1_2STOP 0x0c 139 #define TXCTRL1_STPMSK 0x0c 140 #define TXCTRL1_CLK1X 0x00 141 #define TXCTRL1_CLK16X 0x40 142 #define TXCTRL1_CLK32X 0x80 143 #define TXCTRL1_CLK64X 0xc0 144 #define TXCTRL1_CLKMSK 0xc0 145 #define W_TXCTRL2 5 146 #define TXCTRL2_TXEN 0x08 147 #define TXCTRL2_BITMSK 0x60 148 #define TXCTRL2_5BITS 0x00 149 #define TXCTRL2_7BITS 0x20 150 #define TXCTRL2_6BITS 0x40 151 #define TXCTRL2_8BITS 0x60 152 #define W_SYNC1 6 153 #define W_SYNC2 7 154 #define W_TXBUF 8 155 #define W_MINTR 9 156 #define MINTR_STATUSHI 0x10 157 #define MINTR_RST_MASK 0xc0 158 #define MINTR_RST_B 0x40 159 #define MINTR_RST_A 0x80 160 #define MINTR_RST_ALL 0xc0 161 #define W_MISC1 10 162 #define W_CLOCK 11 163 #define CLOCK_TRXC 0x08 164 #define W_BRGLO 12 165 #define W_BRGHI 13 166 #define W_MISC2 14 167 #define MISC2_PLLDIS 0x30 168 #define W_EXTINT 15 169 #define EXTINT_DCD 0x08 170 #define EXTINT_SYNCINT 0x10 171 #define EXTINT_CTSINT 0x20 172 #define EXTINT_TXUNDRN 0x40 173 #define EXTINT_BRKINT 0x80 174 175 #define R_STATUS 0 176 #define STATUS_RXAV 0x01 177 #define STATUS_ZERO 0x02 178 #define STATUS_TXEMPTY 0x04 179 #define STATUS_DCD 0x08 180 #define STATUS_SYNC 0x10 181 #define STATUS_CTS 0x20 182 #define STATUS_TXUNDRN 0x40 183 #define STATUS_BRK 0x80 184 #define R_SPEC 1 185 #define SPEC_ALLSENT 0x01 186 #define SPEC_BITS8 0x06 187 #define R_IVEC 2 188 #define IVEC_TXINTB 0x00 189 #define IVEC_LONOINT 0x06 190 #define IVEC_LORXINTA 0x0c 191 #define IVEC_LORXINTB 0x04 192 #define IVEC_LOTXINTA 0x08 193 #define IVEC_HINOINT 0x60 194 #define IVEC_HIRXINTA 0x30 195 #define IVEC_HIRXINTB 0x20 196 #define IVEC_HITXINTA 0x10 197 #define R_INTR 3 198 #define INTR_EXTINTB 0x01 199 #define INTR_TXINTB 0x02 200 #define INTR_RXINTB 0x04 201 #define INTR_EXTINTA 0x08 202 #define INTR_TXINTA 0x10 203 #define INTR_RXINTA 0x20 204 #define R_IPEN 4 205 #define R_TXCTRL1 5 206 #define R_TXCTRL2 6 207 #define R_BC 7 208 #define R_RXBUF 8 209 #define R_RXCTRL 9 210 #define R_MISC 10 211 #define R_MISC1 11 212 #define R_BRGLO 12 213 #define R_BRGHI 13 214 #define R_MISC1I 14 215 #define R_EXTINT 15 216 217 static void handle_kbd_command(ChannelState *s, int val); 218 static int serial_can_receive(void *opaque); 219 static void serial_receive_byte(ChannelState *s, int ch); 220 221 static void clear_queue(void *opaque) 222 { 223 ChannelState *s = opaque; 224 SERIOQueue *q = &s->queue; 225 q->rptr = q->wptr = q->count = 0; 226 } 227 228 static void put_queue(void *opaque, int b) 229 { 230 ChannelState *s = opaque; 231 SERIOQueue *q = &s->queue; 232 233 trace_escc_put_queue(CHN_C(s), b); 234 if (q->count >= SERIO_QUEUE_SIZE) 235 return; 236 q->data[q->wptr] = b; 237 if (++q->wptr == SERIO_QUEUE_SIZE) 238 q->wptr = 0; 239 q->count++; 240 serial_receive_byte(s, 0); 241 } 242 243 static uint32_t get_queue(void *opaque) 244 { 245 ChannelState *s = opaque; 246 SERIOQueue *q = &s->queue; 247 int val; 248 249 if (q->count == 0) { 250 return 0; 251 } else { 252 val = q->data[q->rptr]; 253 if (++q->rptr == SERIO_QUEUE_SIZE) 254 q->rptr = 0; 255 q->count--; 256 } 257 trace_escc_get_queue(CHN_C(s), val); 258 if (q->count > 0) 259 serial_receive_byte(s, 0); 260 return val; 261 } 262 263 static int escc_update_irq_chn(ChannelState *s) 264 { 265 if ((((s->wregs[W_INTR] & INTR_TXINT) && (s->txint == 1)) || 266 // tx ints enabled, pending 267 ((((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINT1ST) || 268 ((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINTALL)) && 269 s->rxint == 1) || // rx ints enabled, pending 270 ((s->wregs[W_EXTINT] & EXTINT_BRKINT) && 271 (s->rregs[R_STATUS] & STATUS_BRK)))) { // break int e&p 272 return 1; 273 } 274 return 0; 275 } 276 277 static void escc_update_irq(ChannelState *s) 278 { 279 int irq; 280 281 irq = escc_update_irq_chn(s); 282 irq |= escc_update_irq_chn(s->otherchn); 283 284 trace_escc_update_irq(irq); 285 qemu_set_irq(s->irq, irq); 286 } 287 288 static void escc_reset_chn(ChannelState *s) 289 { 290 int i; 291 292 s->reg = 0; 293 for (i = 0; i < SERIAL_REGS; i++) { 294 s->rregs[i] = 0; 295 s->wregs[i] = 0; 296 } 297 s->wregs[W_TXCTRL1] = TXCTRL1_1STOP; // 1X divisor, 1 stop bit, no parity 298 s->wregs[W_MINTR] = MINTR_RST_ALL; 299 s->wregs[W_CLOCK] = CLOCK_TRXC; // Synch mode tx clock = TRxC 300 s->wregs[W_MISC2] = MISC2_PLLDIS; // PLL disabled 301 s->wregs[W_EXTINT] = EXTINT_DCD | EXTINT_SYNCINT | EXTINT_CTSINT | 302 EXTINT_TXUNDRN | EXTINT_BRKINT; // Enable most interrupts 303 if (s->disabled) 304 s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_DCD | STATUS_SYNC | 305 STATUS_CTS | STATUS_TXUNDRN; 306 else 307 s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_TXUNDRN; 308 s->rregs[R_SPEC] = SPEC_BITS8 | SPEC_ALLSENT; 309 310 s->rx = s->tx = 0; 311 s->rxint = s->txint = 0; 312 s->rxint_under_svc = s->txint_under_svc = 0; 313 s->e0_mode = s->led_mode = s->caps_lock_mode = s->num_lock_mode = 0; 314 clear_queue(s); 315 } 316 317 static void escc_reset(DeviceState *d) 318 { 319 ESCCState *s = ESCC(d); 320 321 escc_reset_chn(&s->chn[0]); 322 escc_reset_chn(&s->chn[1]); 323 } 324 325 static inline void set_rxint(ChannelState *s) 326 { 327 s->rxint = 1; 328 /* XXX: missing daisy chainnig: chn_b rx should have a lower priority 329 than chn_a rx/tx/special_condition service*/ 330 s->rxint_under_svc = 1; 331 if (s->chn == chn_a) { 332 s->rregs[R_INTR] |= INTR_RXINTA; 333 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 334 s->otherchn->rregs[R_IVEC] = IVEC_HIRXINTA; 335 else 336 s->otherchn->rregs[R_IVEC] = IVEC_LORXINTA; 337 } else { 338 s->otherchn->rregs[R_INTR] |= INTR_RXINTB; 339 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 340 s->rregs[R_IVEC] = IVEC_HIRXINTB; 341 else 342 s->rregs[R_IVEC] = IVEC_LORXINTB; 343 } 344 escc_update_irq(s); 345 } 346 347 static inline void set_txint(ChannelState *s) 348 { 349 s->txint = 1; 350 if (!s->rxint_under_svc) { 351 s->txint_under_svc = 1; 352 if (s->chn == chn_a) { 353 if (s->wregs[W_INTR] & INTR_TXINT) { 354 s->rregs[R_INTR] |= INTR_TXINTA; 355 } 356 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 357 s->otherchn->rregs[R_IVEC] = IVEC_HITXINTA; 358 else 359 s->otherchn->rregs[R_IVEC] = IVEC_LOTXINTA; 360 } else { 361 s->rregs[R_IVEC] = IVEC_TXINTB; 362 if (s->wregs[W_INTR] & INTR_TXINT) { 363 s->otherchn->rregs[R_INTR] |= INTR_TXINTB; 364 } 365 } 366 escc_update_irq(s); 367 } 368 } 369 370 static inline void clr_rxint(ChannelState *s) 371 { 372 s->rxint = 0; 373 s->rxint_under_svc = 0; 374 if (s->chn == chn_a) { 375 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 376 s->otherchn->rregs[R_IVEC] = IVEC_HINOINT; 377 else 378 s->otherchn->rregs[R_IVEC] = IVEC_LONOINT; 379 s->rregs[R_INTR] &= ~INTR_RXINTA; 380 } else { 381 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 382 s->rregs[R_IVEC] = IVEC_HINOINT; 383 else 384 s->rregs[R_IVEC] = IVEC_LONOINT; 385 s->otherchn->rregs[R_INTR] &= ~INTR_RXINTB; 386 } 387 if (s->txint) 388 set_txint(s); 389 escc_update_irq(s); 390 } 391 392 static inline void clr_txint(ChannelState *s) 393 { 394 s->txint = 0; 395 s->txint_under_svc = 0; 396 if (s->chn == chn_a) { 397 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 398 s->otherchn->rregs[R_IVEC] = IVEC_HINOINT; 399 else 400 s->otherchn->rregs[R_IVEC] = IVEC_LONOINT; 401 s->rregs[R_INTR] &= ~INTR_TXINTA; 402 } else { 403 s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB; 404 if (s->wregs[W_MINTR] & MINTR_STATUSHI) 405 s->rregs[R_IVEC] = IVEC_HINOINT; 406 else 407 s->rregs[R_IVEC] = IVEC_LONOINT; 408 s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB; 409 } 410 if (s->rxint) 411 set_rxint(s); 412 escc_update_irq(s); 413 } 414 415 static void escc_update_parameters(ChannelState *s) 416 { 417 int speed, parity, data_bits, stop_bits; 418 QEMUSerialSetParams ssp; 419 420 if (!qemu_chr_fe_backend_connected(&s->chr) || s->type != ser) 421 return; 422 423 if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREN) { 424 if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREV) 425 parity = 'E'; 426 else 427 parity = 'O'; 428 } else { 429 parity = 'N'; 430 } 431 if ((s->wregs[W_TXCTRL1] & TXCTRL1_STPMSK) == TXCTRL1_2STOP) 432 stop_bits = 2; 433 else 434 stop_bits = 1; 435 switch (s->wregs[W_TXCTRL2] & TXCTRL2_BITMSK) { 436 case TXCTRL2_5BITS: 437 data_bits = 5; 438 break; 439 case TXCTRL2_7BITS: 440 data_bits = 7; 441 break; 442 case TXCTRL2_6BITS: 443 data_bits = 6; 444 break; 445 default: 446 case TXCTRL2_8BITS: 447 data_bits = 8; 448 break; 449 } 450 speed = s->clock / ((s->wregs[W_BRGLO] | (s->wregs[W_BRGHI] << 8)) + 2); 451 switch (s->wregs[W_TXCTRL1] & TXCTRL1_CLKMSK) { 452 case TXCTRL1_CLK1X: 453 break; 454 case TXCTRL1_CLK16X: 455 speed /= 16; 456 break; 457 case TXCTRL1_CLK32X: 458 speed /= 32; 459 break; 460 default: 461 case TXCTRL1_CLK64X: 462 speed /= 64; 463 break; 464 } 465 ssp.speed = speed; 466 ssp.parity = parity; 467 ssp.data_bits = data_bits; 468 ssp.stop_bits = stop_bits; 469 trace_escc_update_parameters(CHN_C(s), speed, parity, data_bits, stop_bits); 470 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 471 } 472 473 static void escc_mem_write(void *opaque, hwaddr addr, 474 uint64_t val, unsigned size) 475 { 476 ESCCState *serial = opaque; 477 ChannelState *s; 478 uint32_t saddr; 479 int newreg, channel; 480 481 val &= 0xff; 482 saddr = (addr >> serial->it_shift) & 1; 483 channel = (addr >> (serial->it_shift + 1)) & 1; 484 s = &serial->chn[channel]; 485 switch (saddr) { 486 case SERIAL_CTRL: 487 trace_escc_mem_writeb_ctrl(CHN_C(s), s->reg, val & 0xff); 488 newreg = 0; 489 switch (s->reg) { 490 case W_CMD: 491 newreg = val & CMD_PTR_MASK; 492 val &= CMD_CMD_MASK; 493 switch (val) { 494 case CMD_HI: 495 newreg |= CMD_HI; 496 break; 497 case CMD_CLR_TXINT: 498 clr_txint(s); 499 break; 500 case CMD_CLR_IUS: 501 if (s->rxint_under_svc) { 502 s->rxint_under_svc = 0; 503 if (s->txint) { 504 set_txint(s); 505 } 506 } else if (s->txint_under_svc) { 507 s->txint_under_svc = 0; 508 } 509 escc_update_irq(s); 510 break; 511 default: 512 break; 513 } 514 break; 515 case W_INTR ... W_RXCTRL: 516 case W_SYNC1 ... W_TXBUF: 517 case W_MISC1 ... W_CLOCK: 518 case W_MISC2 ... W_EXTINT: 519 s->wregs[s->reg] = val; 520 break; 521 case W_TXCTRL1: 522 case W_TXCTRL2: 523 s->wregs[s->reg] = val; 524 escc_update_parameters(s); 525 break; 526 case W_BRGLO: 527 case W_BRGHI: 528 s->wregs[s->reg] = val; 529 s->rregs[s->reg] = val; 530 escc_update_parameters(s); 531 break; 532 case W_MINTR: 533 switch (val & MINTR_RST_MASK) { 534 case 0: 535 default: 536 break; 537 case MINTR_RST_B: 538 escc_reset_chn(&serial->chn[0]); 539 return; 540 case MINTR_RST_A: 541 escc_reset_chn(&serial->chn[1]); 542 return; 543 case MINTR_RST_ALL: 544 escc_reset(DEVICE(serial)); 545 return; 546 } 547 break; 548 default: 549 break; 550 } 551 if (s->reg == 0) 552 s->reg = newreg; 553 else 554 s->reg = 0; 555 break; 556 case SERIAL_DATA: 557 trace_escc_mem_writeb_data(CHN_C(s), val); 558 s->tx = val; 559 if (s->wregs[W_TXCTRL2] & TXCTRL2_TXEN) { // tx enabled 560 if (qemu_chr_fe_backend_connected(&s->chr)) { 561 /* XXX this blocks entire thread. Rewrite to use 562 * qemu_chr_fe_write and background I/O callbacks */ 563 qemu_chr_fe_write_all(&s->chr, &s->tx, 1); 564 } else if (s->type == kbd && !s->disabled) { 565 handle_kbd_command(s, val); 566 } 567 } 568 s->rregs[R_STATUS] |= STATUS_TXEMPTY; // Tx buffer empty 569 s->rregs[R_SPEC] |= SPEC_ALLSENT; // All sent 570 set_txint(s); 571 break; 572 default: 573 break; 574 } 575 } 576 577 static uint64_t escc_mem_read(void *opaque, hwaddr addr, 578 unsigned size) 579 { 580 ESCCState *serial = opaque; 581 ChannelState *s; 582 uint32_t saddr; 583 uint32_t ret; 584 int channel; 585 586 saddr = (addr >> serial->it_shift) & 1; 587 channel = (addr >> (serial->it_shift + 1)) & 1; 588 s = &serial->chn[channel]; 589 switch (saddr) { 590 case SERIAL_CTRL: 591 trace_escc_mem_readb_ctrl(CHN_C(s), s->reg, s->rregs[s->reg]); 592 ret = s->rregs[s->reg]; 593 s->reg = 0; 594 return ret; 595 case SERIAL_DATA: 596 s->rregs[R_STATUS] &= ~STATUS_RXAV; 597 clr_rxint(s); 598 if (s->type == kbd || s->type == mouse) 599 ret = get_queue(s); 600 else 601 ret = s->rx; 602 trace_escc_mem_readb_data(CHN_C(s), ret); 603 qemu_chr_fe_accept_input(&s->chr); 604 return ret; 605 default: 606 break; 607 } 608 return 0; 609 } 610 611 static const MemoryRegionOps escc_mem_ops = { 612 .read = escc_mem_read, 613 .write = escc_mem_write, 614 .endianness = DEVICE_NATIVE_ENDIAN, 615 .valid = { 616 .min_access_size = 1, 617 .max_access_size = 1, 618 }, 619 }; 620 621 static int serial_can_receive(void *opaque) 622 { 623 ChannelState *s = opaque; 624 int ret; 625 626 if (((s->wregs[W_RXCTRL] & RXCTRL_RXEN) == 0) // Rx not enabled 627 || ((s->rregs[R_STATUS] & STATUS_RXAV) == STATUS_RXAV)) 628 // char already available 629 ret = 0; 630 else 631 ret = 1; 632 return ret; 633 } 634 635 static void serial_receive_byte(ChannelState *s, int ch) 636 { 637 trace_escc_serial_receive_byte(CHN_C(s), ch); 638 s->rregs[R_STATUS] |= STATUS_RXAV; 639 s->rx = ch; 640 set_rxint(s); 641 } 642 643 static void serial_receive_break(ChannelState *s) 644 { 645 s->rregs[R_STATUS] |= STATUS_BRK; 646 escc_update_irq(s); 647 } 648 649 static void serial_receive1(void *opaque, const uint8_t *buf, int size) 650 { 651 ChannelState *s = opaque; 652 serial_receive_byte(s, buf[0]); 653 } 654 655 static void serial_event(void *opaque, int event) 656 { 657 ChannelState *s = opaque; 658 if (event == CHR_EVENT_BREAK) 659 serial_receive_break(s); 660 } 661 662 static const VMStateDescription vmstate_escc_chn = { 663 .name ="escc_chn", 664 .version_id = 2, 665 .minimum_version_id = 1, 666 .fields = (VMStateField[]) { 667 VMSTATE_UINT32(vmstate_dummy, ChannelState), 668 VMSTATE_UINT32(reg, ChannelState), 669 VMSTATE_UINT32(rxint, ChannelState), 670 VMSTATE_UINT32(txint, ChannelState), 671 VMSTATE_UINT32(rxint_under_svc, ChannelState), 672 VMSTATE_UINT32(txint_under_svc, ChannelState), 673 VMSTATE_UINT8(rx, ChannelState), 674 VMSTATE_UINT8(tx, ChannelState), 675 VMSTATE_BUFFER(wregs, ChannelState), 676 VMSTATE_BUFFER(rregs, ChannelState), 677 VMSTATE_END_OF_LIST() 678 } 679 }; 680 681 static const VMStateDescription vmstate_escc = { 682 .name ="escc", 683 .version_id = 2, 684 .minimum_version_id = 1, 685 .fields = (VMStateField[]) { 686 VMSTATE_STRUCT_ARRAY(chn, ESCCState, 2, 2, vmstate_escc_chn, 687 ChannelState), 688 VMSTATE_END_OF_LIST() 689 } 690 }; 691 692 MemoryRegion *escc_init(hwaddr base, qemu_irq irqA, qemu_irq irqB, 693 Chardev *chrA, Chardev *chrB, 694 int clock, int it_shift) 695 { 696 DeviceState *dev; 697 SysBusDevice *s; 698 ESCCState *d; 699 700 dev = qdev_create(NULL, TYPE_ESCC); 701 qdev_prop_set_uint32(dev, "disabled", 0); 702 qdev_prop_set_uint32(dev, "frequency", clock); 703 qdev_prop_set_uint32(dev, "it_shift", it_shift); 704 qdev_prop_set_chr(dev, "chrB", chrB); 705 qdev_prop_set_chr(dev, "chrA", chrA); 706 qdev_prop_set_uint32(dev, "chnBtype", ser); 707 qdev_prop_set_uint32(dev, "chnAtype", ser); 708 qdev_init_nofail(dev); 709 s = SYS_BUS_DEVICE(dev); 710 sysbus_connect_irq(s, 0, irqB); 711 sysbus_connect_irq(s, 1, irqA); 712 if (base) { 713 sysbus_mmio_map(s, 0, base); 714 } 715 716 d = ESCC(s); 717 return &d->mmio; 718 } 719 720 static const uint8_t qcode_to_keycode[Q_KEY_CODE__MAX] = { 721 [Q_KEY_CODE_SHIFT] = 99, 722 [Q_KEY_CODE_SHIFT_R] = 110, 723 [Q_KEY_CODE_ALT] = 19, 724 [Q_KEY_CODE_ALT_R] = 13, 725 [Q_KEY_CODE_CTRL] = 76, 726 [Q_KEY_CODE_CTRL_R] = 76, 727 [Q_KEY_CODE_ESC] = 29, 728 [Q_KEY_CODE_1] = 30, 729 [Q_KEY_CODE_2] = 31, 730 [Q_KEY_CODE_3] = 32, 731 [Q_KEY_CODE_4] = 33, 732 [Q_KEY_CODE_5] = 34, 733 [Q_KEY_CODE_6] = 35, 734 [Q_KEY_CODE_7] = 36, 735 [Q_KEY_CODE_8] = 37, 736 [Q_KEY_CODE_9] = 38, 737 [Q_KEY_CODE_0] = 39, 738 [Q_KEY_CODE_MINUS] = 40, 739 [Q_KEY_CODE_EQUAL] = 41, 740 [Q_KEY_CODE_BACKSPACE] = 43, 741 [Q_KEY_CODE_TAB] = 53, 742 [Q_KEY_CODE_Q] = 54, 743 [Q_KEY_CODE_W] = 55, 744 [Q_KEY_CODE_E] = 56, 745 [Q_KEY_CODE_R] = 57, 746 [Q_KEY_CODE_T] = 58, 747 [Q_KEY_CODE_Y] = 59, 748 [Q_KEY_CODE_U] = 60, 749 [Q_KEY_CODE_I] = 61, 750 [Q_KEY_CODE_O] = 62, 751 [Q_KEY_CODE_P] = 63, 752 [Q_KEY_CODE_BRACKET_LEFT] = 64, 753 [Q_KEY_CODE_BRACKET_RIGHT] = 65, 754 [Q_KEY_CODE_RET] = 89, 755 [Q_KEY_CODE_A] = 77, 756 [Q_KEY_CODE_S] = 78, 757 [Q_KEY_CODE_D] = 79, 758 [Q_KEY_CODE_F] = 80, 759 [Q_KEY_CODE_G] = 81, 760 [Q_KEY_CODE_H] = 82, 761 [Q_KEY_CODE_J] = 83, 762 [Q_KEY_CODE_K] = 84, 763 [Q_KEY_CODE_L] = 85, 764 [Q_KEY_CODE_SEMICOLON] = 86, 765 [Q_KEY_CODE_APOSTROPHE] = 87, 766 [Q_KEY_CODE_GRAVE_ACCENT] = 42, 767 [Q_KEY_CODE_BACKSLASH] = 88, 768 [Q_KEY_CODE_Z] = 100, 769 [Q_KEY_CODE_X] = 101, 770 [Q_KEY_CODE_C] = 102, 771 [Q_KEY_CODE_V] = 103, 772 [Q_KEY_CODE_B] = 104, 773 [Q_KEY_CODE_N] = 105, 774 [Q_KEY_CODE_M] = 106, 775 [Q_KEY_CODE_COMMA] = 107, 776 [Q_KEY_CODE_DOT] = 108, 777 [Q_KEY_CODE_SLASH] = 109, 778 [Q_KEY_CODE_ASTERISK] = 47, 779 [Q_KEY_CODE_SPC] = 121, 780 [Q_KEY_CODE_CAPS_LOCK] = 119, 781 [Q_KEY_CODE_F1] = 5, 782 [Q_KEY_CODE_F2] = 6, 783 [Q_KEY_CODE_F3] = 8, 784 [Q_KEY_CODE_F4] = 10, 785 [Q_KEY_CODE_F5] = 12, 786 [Q_KEY_CODE_F6] = 14, 787 [Q_KEY_CODE_F7] = 16, 788 [Q_KEY_CODE_F8] = 17, 789 [Q_KEY_CODE_F9] = 18, 790 [Q_KEY_CODE_F10] = 7, 791 [Q_KEY_CODE_NUM_LOCK] = 98, 792 [Q_KEY_CODE_SCROLL_LOCK] = 23, 793 [Q_KEY_CODE_KP_DIVIDE] = 46, 794 [Q_KEY_CODE_KP_MULTIPLY] = 47, 795 [Q_KEY_CODE_KP_SUBTRACT] = 71, 796 [Q_KEY_CODE_KP_ADD] = 125, 797 [Q_KEY_CODE_KP_ENTER] = 90, 798 [Q_KEY_CODE_KP_DECIMAL] = 50, 799 [Q_KEY_CODE_KP_0] = 94, 800 [Q_KEY_CODE_KP_1] = 112, 801 [Q_KEY_CODE_KP_2] = 113, 802 [Q_KEY_CODE_KP_3] = 114, 803 [Q_KEY_CODE_KP_4] = 91, 804 [Q_KEY_CODE_KP_5] = 92, 805 [Q_KEY_CODE_KP_6] = 93, 806 [Q_KEY_CODE_KP_7] = 68, 807 [Q_KEY_CODE_KP_8] = 69, 808 [Q_KEY_CODE_KP_9] = 70, 809 [Q_KEY_CODE_LESS] = 124, 810 [Q_KEY_CODE_F11] = 9, 811 [Q_KEY_CODE_F12] = 11, 812 [Q_KEY_CODE_HOME] = 52, 813 [Q_KEY_CODE_PGUP] = 96, 814 [Q_KEY_CODE_PGDN] = 123, 815 [Q_KEY_CODE_END] = 74, 816 [Q_KEY_CODE_LEFT] = 24, 817 [Q_KEY_CODE_UP] = 20, 818 [Q_KEY_CODE_DOWN] = 27, 819 [Q_KEY_CODE_RIGHT] = 28, 820 [Q_KEY_CODE_INSERT] = 44, 821 [Q_KEY_CODE_DELETE] = 66, 822 [Q_KEY_CODE_STOP] = 1, 823 [Q_KEY_CODE_AGAIN] = 3, 824 [Q_KEY_CODE_PROPS] = 25, 825 [Q_KEY_CODE_UNDO] = 26, 826 [Q_KEY_CODE_FRONT] = 49, 827 [Q_KEY_CODE_COPY] = 51, 828 [Q_KEY_CODE_OPEN] = 72, 829 [Q_KEY_CODE_PASTE] = 73, 830 [Q_KEY_CODE_FIND] = 95, 831 [Q_KEY_CODE_CUT] = 97, 832 [Q_KEY_CODE_LF] = 111, 833 [Q_KEY_CODE_HELP] = 118, 834 [Q_KEY_CODE_META_L] = 120, 835 [Q_KEY_CODE_META_R] = 122, 836 [Q_KEY_CODE_COMPOSE] = 67, 837 [Q_KEY_CODE_PRINT] = 22, 838 [Q_KEY_CODE_SYSRQ] = 21, 839 }; 840 841 static void sunkbd_handle_event(DeviceState *dev, QemuConsole *src, 842 InputEvent *evt) 843 { 844 ChannelState *s = (ChannelState *)dev; 845 int qcode, keycode; 846 InputKeyEvent *key; 847 848 assert(evt->type == INPUT_EVENT_KIND_KEY); 849 key = evt->u.key.data; 850 qcode = qemu_input_key_value_to_qcode(key->key); 851 trace_escc_sunkbd_event_in(qcode, QKeyCode_lookup[qcode], 852 key->down); 853 854 if (qcode == Q_KEY_CODE_CAPS_LOCK) { 855 if (key->down) { 856 s->caps_lock_mode ^= 1; 857 if (s->caps_lock_mode == 2) { 858 return; /* Drop second press */ 859 } 860 } else { 861 s->caps_lock_mode ^= 2; 862 if (s->caps_lock_mode == 3) { 863 return; /* Drop first release */ 864 } 865 } 866 } 867 868 if (qcode == Q_KEY_CODE_NUM_LOCK) { 869 if (key->down) { 870 s->num_lock_mode ^= 1; 871 if (s->num_lock_mode == 2) { 872 return; /* Drop second press */ 873 } 874 } else { 875 s->num_lock_mode ^= 2; 876 if (s->num_lock_mode == 3) { 877 return; /* Drop first release */ 878 } 879 } 880 } 881 882 keycode = qcode_to_keycode[qcode]; 883 if (!key->down) { 884 keycode |= 0x80; 885 } 886 trace_escc_sunkbd_event_out(keycode); 887 put_queue(s, keycode); 888 } 889 890 static QemuInputHandler sunkbd_handler = { 891 .name = "sun keyboard", 892 .mask = INPUT_EVENT_MASK_KEY, 893 .event = sunkbd_handle_event, 894 }; 895 896 static void handle_kbd_command(ChannelState *s, int val) 897 { 898 trace_escc_kbd_command(val); 899 if (s->led_mode) { // Ignore led byte 900 s->led_mode = 0; 901 return; 902 } 903 switch (val) { 904 case 1: // Reset, return type code 905 clear_queue(s); 906 put_queue(s, 0xff); 907 put_queue(s, 4); // Type 4 908 put_queue(s, 0x7f); 909 break; 910 case 0xe: // Set leds 911 s->led_mode = 1; 912 break; 913 case 7: // Query layout 914 case 0xf: 915 clear_queue(s); 916 put_queue(s, 0xfe); 917 put_queue(s, 0x21); /* en-us layout */ 918 break; 919 default: 920 break; 921 } 922 } 923 924 static void sunmouse_event(void *opaque, 925 int dx, int dy, int dz, int buttons_state) 926 { 927 ChannelState *s = opaque; 928 int ch; 929 930 trace_escc_sunmouse_event(dx, dy, buttons_state); 931 ch = 0x80 | 0x7; /* protocol start byte, no buttons pressed */ 932 933 if (buttons_state & MOUSE_EVENT_LBUTTON) 934 ch ^= 0x4; 935 if (buttons_state & MOUSE_EVENT_MBUTTON) 936 ch ^= 0x2; 937 if (buttons_state & MOUSE_EVENT_RBUTTON) 938 ch ^= 0x1; 939 940 put_queue(s, ch); 941 942 ch = dx; 943 944 if (ch > 127) 945 ch = 127; 946 else if (ch < -127) 947 ch = -127; 948 949 put_queue(s, ch & 0xff); 950 951 ch = -dy; 952 953 if (ch > 127) 954 ch = 127; 955 else if (ch < -127) 956 ch = -127; 957 958 put_queue(s, ch & 0xff); 959 960 // MSC protocol specify two extra motion bytes 961 962 put_queue(s, 0); 963 put_queue(s, 0); 964 } 965 966 void slavio_serial_ms_kbd_init(hwaddr base, qemu_irq irq, 967 int disabled, int clock, int it_shift) 968 { 969 DeviceState *dev; 970 SysBusDevice *s; 971 972 dev = qdev_create(NULL, TYPE_ESCC); 973 qdev_prop_set_uint32(dev, "disabled", disabled); 974 qdev_prop_set_uint32(dev, "frequency", clock); 975 qdev_prop_set_uint32(dev, "it_shift", it_shift); 976 qdev_prop_set_chr(dev, "chrB", NULL); 977 qdev_prop_set_chr(dev, "chrA", NULL); 978 qdev_prop_set_uint32(dev, "chnBtype", mouse); 979 qdev_prop_set_uint32(dev, "chnAtype", kbd); 980 qdev_init_nofail(dev); 981 s = SYS_BUS_DEVICE(dev); 982 sysbus_connect_irq(s, 0, irq); 983 sysbus_connect_irq(s, 1, irq); 984 sysbus_mmio_map(s, 0, base); 985 } 986 987 static void escc_init1(Object *obj) 988 { 989 ESCCState *s = ESCC(obj); 990 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 991 unsigned int i; 992 993 for (i = 0; i < 2; i++) { 994 sysbus_init_irq(dev, &s->chn[i].irq); 995 s->chn[i].chn = 1 - i; 996 } 997 s->chn[0].otherchn = &s->chn[1]; 998 s->chn[1].otherchn = &s->chn[0]; 999 1000 sysbus_init_mmio(dev, &s->mmio); 1001 } 1002 1003 static void escc_realize(DeviceState *dev, Error **errp) 1004 { 1005 ESCCState *s = ESCC(dev); 1006 unsigned int i; 1007 1008 s->chn[0].disabled = s->disabled; 1009 s->chn[1].disabled = s->disabled; 1010 1011 memory_region_init_io(&s->mmio, OBJECT(dev), &escc_mem_ops, s, "escc", 1012 ESCC_SIZE << s->it_shift); 1013 1014 for (i = 0; i < 2; i++) { 1015 if (qemu_chr_fe_backend_connected(&s->chn[i].chr)) { 1016 s->chn[i].clock = s->frequency / 2; 1017 qemu_chr_fe_set_handlers(&s->chn[i].chr, serial_can_receive, 1018 serial_receive1, serial_event, NULL, 1019 &s->chn[i], NULL, true); 1020 } 1021 } 1022 1023 if (s->chn[0].type == mouse) { 1024 qemu_add_mouse_event_handler(sunmouse_event, &s->chn[0], 0, 1025 "QEMU Sun Mouse"); 1026 } 1027 if (s->chn[1].type == kbd) { 1028 s->chn[1].hs = qemu_input_handler_register((DeviceState *)(&s->chn[1]), 1029 &sunkbd_handler); 1030 } 1031 } 1032 1033 static Property escc_properties[] = { 1034 DEFINE_PROP_UINT32("frequency", ESCCState, frequency, 0), 1035 DEFINE_PROP_UINT32("it_shift", ESCCState, it_shift, 0), 1036 DEFINE_PROP_UINT32("disabled", ESCCState, disabled, 0), 1037 DEFINE_PROP_UINT32("chnBtype", ESCCState, chn[0].type, 0), 1038 DEFINE_PROP_UINT32("chnAtype", ESCCState, chn[1].type, 0), 1039 DEFINE_PROP_CHR("chrB", ESCCState, chn[0].chr), 1040 DEFINE_PROP_CHR("chrA", ESCCState, chn[1].chr), 1041 DEFINE_PROP_END_OF_LIST(), 1042 }; 1043 1044 static void escc_class_init(ObjectClass *klass, void *data) 1045 { 1046 DeviceClass *dc = DEVICE_CLASS(klass); 1047 1048 dc->reset = escc_reset; 1049 dc->realize = escc_realize; 1050 dc->vmsd = &vmstate_escc; 1051 dc->props = escc_properties; 1052 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 1053 } 1054 1055 static const TypeInfo escc_info = { 1056 .name = TYPE_ESCC, 1057 .parent = TYPE_SYS_BUS_DEVICE, 1058 .instance_size = sizeof(ESCCState), 1059 .instance_init = escc_init1, 1060 .class_init = escc_class_init, 1061 }; 1062 1063 static void escc_register_types(void) 1064 { 1065 type_register_static(&escc_info); 1066 } 1067 1068 type_init(escc_register_types) 1069