1 /* 2 * QEMU model of the Canon DIGIC UART block. 3 * 4 * Copyright (C) 2013 Antony Pavlov <antonynpavlov@gmail.com> 5 * 6 * This model is based on reverse engineering efforts 7 * made by CHDK (http://chdk.wikia.com) and 8 * Magic Lantern (http://www.magiclantern.fm) projects 9 * contributors. 10 * 11 * See "Serial terminal" docs here: 12 * http://magiclantern.wikia.com/wiki/Register_Map#Misc_Registers 13 * 14 * The QEMU model of the Milkymist UART block by Michael Walle 15 * is used as a template. 16 * 17 * This program is free software; you can redistribute it and/or modify 18 * it under the terms of the GNU General Public License as published by 19 * the Free Software Foundation; either version 2 of the License, or 20 * (at your option) any later version. 21 * 22 * This program is distributed in the hope that it will be useful, 23 * but WITHOUT ANY WARRANTY; without even the implied warranty of 24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 25 * GNU General Public License for more details. 26 * 27 */ 28 29 #include "hw/hw.h" 30 #include "hw/sysbus.h" 31 #include "sysemu/char.h" 32 33 #include "hw/char/digic-uart.h" 34 35 enum { 36 ST_RX_RDY = (1 << 0), 37 ST_TX_RDY = (1 << 1), 38 }; 39 40 static uint64_t digic_uart_read(void *opaque, hwaddr addr, 41 unsigned size) 42 { 43 DigicUartState *s = opaque; 44 uint64_t ret = 0; 45 46 addr >>= 2; 47 48 switch (addr) { 49 case R_RX: 50 s->reg_st &= ~(ST_RX_RDY); 51 ret = s->reg_rx; 52 break; 53 54 case R_ST: 55 ret = s->reg_st; 56 break; 57 58 default: 59 qemu_log_mask(LOG_UNIMP, 60 "digic-uart: read access to unknown register 0x" 61 TARGET_FMT_plx, addr << 2); 62 } 63 64 return ret; 65 } 66 67 static void digic_uart_write(void *opaque, hwaddr addr, uint64_t value, 68 unsigned size) 69 { 70 DigicUartState *s = opaque; 71 unsigned char ch = value; 72 73 addr >>= 2; 74 75 switch (addr) { 76 case R_TX: 77 if (s->chr) { 78 qemu_chr_fe_write_all(s->chr, &ch, 1); 79 } 80 break; 81 82 case R_ST: 83 /* 84 * Ignore write to R_ST. 85 * 86 * The point is that this register is actively used 87 * during receiving and transmitting symbols, 88 * but we don't know the function of most of bits. 89 * 90 * Ignoring writes to R_ST is only a simplification 91 * of the model. It has no perceptible side effects 92 * for existing guests. 93 */ 94 break; 95 96 default: 97 qemu_log_mask(LOG_UNIMP, 98 "digic-uart: write access to unknown register 0x" 99 TARGET_FMT_plx, addr << 2); 100 } 101 } 102 103 static const MemoryRegionOps uart_mmio_ops = { 104 .read = digic_uart_read, 105 .write = digic_uart_write, 106 .valid = { 107 .min_access_size = 4, 108 .max_access_size = 4, 109 }, 110 .endianness = DEVICE_NATIVE_ENDIAN, 111 }; 112 113 static int uart_can_rx(void *opaque) 114 { 115 DigicUartState *s = opaque; 116 117 return !(s->reg_st & ST_RX_RDY); 118 } 119 120 static void uart_rx(void *opaque, const uint8_t *buf, int size) 121 { 122 DigicUartState *s = opaque; 123 124 assert(uart_can_rx(opaque)); 125 126 s->reg_st |= ST_RX_RDY; 127 s->reg_rx = *buf; 128 } 129 130 static void uart_event(void *opaque, int event) 131 { 132 } 133 134 static void digic_uart_reset(DeviceState *d) 135 { 136 DigicUartState *s = DIGIC_UART(d); 137 138 s->reg_rx = 0; 139 s->reg_st = ST_TX_RDY; 140 } 141 142 static void digic_uart_realize(DeviceState *dev, Error **errp) 143 { 144 DigicUartState *s = DIGIC_UART(dev); 145 146 s->chr = qemu_char_get_next_serial(); 147 if (s->chr) { 148 qemu_chr_add_handlers(s->chr, uart_can_rx, uart_rx, uart_event, s); 149 } 150 } 151 152 static void digic_uart_init(Object *obj) 153 { 154 DigicUartState *s = DIGIC_UART(obj); 155 156 memory_region_init_io(&s->regs_region, OBJECT(s), &uart_mmio_ops, s, 157 TYPE_DIGIC_UART, 0x18); 158 sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->regs_region); 159 } 160 161 static const VMStateDescription vmstate_digic_uart = { 162 .name = "digic-uart", 163 .version_id = 1, 164 .minimum_version_id = 1, 165 .minimum_version_id_old = 1, 166 .fields = (VMStateField[]) { 167 VMSTATE_UINT32(reg_rx, DigicUartState), 168 VMSTATE_UINT32(reg_st, DigicUartState), 169 VMSTATE_END_OF_LIST() 170 } 171 }; 172 173 static void digic_uart_class_init(ObjectClass *klass, void *data) 174 { 175 DeviceClass *dc = DEVICE_CLASS(klass); 176 177 dc->realize = digic_uart_realize; 178 dc->reset = digic_uart_reset; 179 dc->vmsd = &vmstate_digic_uart; 180 } 181 182 static const TypeInfo digic_uart_info = { 183 .name = TYPE_DIGIC_UART, 184 .parent = TYPE_SYS_BUS_DEVICE, 185 .instance_size = sizeof(DigicUartState), 186 .instance_init = digic_uart_init, 187 .class_init = digic_uart_class_init, 188 }; 189 190 static void digic_uart_register_types(void) 191 { 192 type_register_static(&digic_uart_info); 193 } 194 195 type_init(digic_uart_register_types) 196