1 /*
2 * QEMU model of the Canon DIGIC UART block.
3 *
4 * Copyright (C) 2013 Antony Pavlov <antonynpavlov@gmail.com>
5 *
6 * This model is based on reverse engineering efforts
7 * made by CHDK (http://chdk.wikia.com) and
8 * Magic Lantern (http://www.magiclantern.fm) projects
9 * contributors.
10 *
11 * See "Serial terminal" docs here:
12 * http://magiclantern.wikia.com/wiki/Register_Map#Misc_Registers
13 *
14 * The QEMU model of the Milkymist UART block by Michael Walle
15 * is used as a template.
16 *
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License as published by
19 * the Free Software Foundation; either version 2 of the License, or
20 * (at your option) any later version.
21 *
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
25 * GNU General Public License for more details.
26 *
27 */
28
29 #include "qemu/osdep.h"
30 #include "hw/sysbus.h"
31 #include "migration/vmstate.h"
32 #include "chardev/char-fe.h"
33 #include "qemu/log.h"
34 #include "qemu/module.h"
35
36 #include "hw/char/digic-uart.h"
37 #include "hw/qdev-properties.h"
38 #include "hw/qdev-properties-system.h"
39
40 enum {
41 ST_RX_RDY = (1 << 0),
42 ST_TX_RDY = (1 << 1),
43 };
44
digic_uart_read(void * opaque,hwaddr addr,unsigned size)45 static uint64_t digic_uart_read(void *opaque, hwaddr addr,
46 unsigned size)
47 {
48 DigicUartState *s = opaque;
49 uint64_t ret = 0;
50
51 addr >>= 2;
52
53 switch (addr) {
54 case R_RX:
55 s->reg_st &= ~(ST_RX_RDY);
56 ret = s->reg_rx;
57 break;
58
59 case R_ST:
60 ret = s->reg_st;
61 break;
62
63 default:
64 qemu_log_mask(LOG_UNIMP,
65 "digic-uart: read access to unknown register 0x"
66 HWADDR_FMT_plx "\n", addr << 2);
67 }
68
69 return ret;
70 }
71
digic_uart_write(void * opaque,hwaddr addr,uint64_t value,unsigned size)72 static void digic_uart_write(void *opaque, hwaddr addr, uint64_t value,
73 unsigned size)
74 {
75 DigicUartState *s = opaque;
76 unsigned char ch = value;
77
78 addr >>= 2;
79
80 switch (addr) {
81 case R_TX:
82 /* XXX this blocks entire thread. Rewrite to use
83 * qemu_chr_fe_write and background I/O callbacks */
84 qemu_chr_fe_write_all(&s->chr, &ch, 1);
85 break;
86
87 case R_ST:
88 /*
89 * Ignore write to R_ST.
90 *
91 * The point is that this register is actively used
92 * during receiving and transmitting symbols,
93 * but we don't know the function of most of bits.
94 *
95 * Ignoring writes to R_ST is only a simplification
96 * of the model. It has no perceptible side effects
97 * for existing guests.
98 */
99 break;
100
101 default:
102 qemu_log_mask(LOG_UNIMP,
103 "digic-uart: write access to unknown register 0x"
104 HWADDR_FMT_plx "\n", addr << 2);
105 }
106 }
107
108 static const MemoryRegionOps uart_mmio_ops = {
109 .read = digic_uart_read,
110 .write = digic_uart_write,
111 .valid = {
112 .min_access_size = 4,
113 .max_access_size = 4,
114 },
115 .endianness = DEVICE_NATIVE_ENDIAN,
116 };
117
uart_can_rx(void * opaque)118 static int uart_can_rx(void *opaque)
119 {
120 DigicUartState *s = opaque;
121
122 return !(s->reg_st & ST_RX_RDY);
123 }
124
uart_rx(void * opaque,const uint8_t * buf,int size)125 static void uart_rx(void *opaque, const uint8_t *buf, int size)
126 {
127 DigicUartState *s = opaque;
128
129 assert(uart_can_rx(opaque));
130
131 s->reg_st |= ST_RX_RDY;
132 s->reg_rx = *buf;
133 }
134
uart_event(void * opaque,QEMUChrEvent event)135 static void uart_event(void *opaque, QEMUChrEvent event)
136 {
137 }
138
digic_uart_reset(DeviceState * d)139 static void digic_uart_reset(DeviceState *d)
140 {
141 DigicUartState *s = DIGIC_UART(d);
142
143 s->reg_rx = 0;
144 s->reg_st = ST_TX_RDY;
145 }
146
digic_uart_realize(DeviceState * dev,Error ** errp)147 static void digic_uart_realize(DeviceState *dev, Error **errp)
148 {
149 DigicUartState *s = DIGIC_UART(dev);
150
151 qemu_chr_fe_set_handlers(&s->chr, uart_can_rx, uart_rx,
152 uart_event, NULL, s, NULL, true);
153 }
154
digic_uart_init(Object * obj)155 static void digic_uart_init(Object *obj)
156 {
157 DigicUartState *s = DIGIC_UART(obj);
158
159 memory_region_init_io(&s->regs_region, OBJECT(s), &uart_mmio_ops, s,
160 TYPE_DIGIC_UART, 0x18);
161 sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->regs_region);
162 }
163
164 static const VMStateDescription vmstate_digic_uart = {
165 .name = "digic-uart",
166 .version_id = 1,
167 .minimum_version_id = 1,
168 .fields = (const VMStateField[]) {
169 VMSTATE_UINT32(reg_rx, DigicUartState),
170 VMSTATE_UINT32(reg_st, DigicUartState),
171 VMSTATE_END_OF_LIST()
172 }
173 };
174
175 static Property digic_uart_properties[] = {
176 DEFINE_PROP_CHR("chardev", DigicUartState, chr),
177 DEFINE_PROP_END_OF_LIST(),
178 };
179
digic_uart_class_init(ObjectClass * klass,void * data)180 static void digic_uart_class_init(ObjectClass *klass, void *data)
181 {
182 DeviceClass *dc = DEVICE_CLASS(klass);
183
184 dc->realize = digic_uart_realize;
185 dc->reset = digic_uart_reset;
186 dc->vmsd = &vmstate_digic_uart;
187 device_class_set_props(dc, digic_uart_properties);
188 }
189
190 static const TypeInfo digic_uart_info = {
191 .name = TYPE_DIGIC_UART,
192 .parent = TYPE_SYS_BUS_DEVICE,
193 .instance_size = sizeof(DigicUartState),
194 .instance_init = digic_uart_init,
195 .class_init = digic_uart_class_init,
196 };
197
digic_uart_register_types(void)198 static void digic_uart_register_types(void)
199 {
200 type_register_static(&digic_uart_info);
201 }
202
203 type_init(digic_uart_register_types)
204