1 /* 2 * CFI parallel flash with AMD command set emulation 3 * 4 * Copyright (c) 2005 Jocelyn Mayer 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License as published by the Free Software Foundation; either 9 * version 2.1 of the License, or (at your option) any later version. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 18 */ 19 20 /* 21 * For now, this code can emulate flashes of 1, 2 or 4 bytes width. 22 * Supported commands/modes are: 23 * - flash read 24 * - flash write 25 * - flash ID read 26 * - sector erase 27 * - chip erase 28 * - unlock bypass command 29 * - CFI queries 30 * 31 * It does not support flash interleaving. 32 * It does not implement software data protection as found in many real chips 33 */ 34 35 #include "qemu/osdep.h" 36 #include "hw/block/block.h" 37 #include "hw/block/flash.h" 38 #include "hw/qdev-properties.h" 39 #include "hw/qdev-properties-system.h" 40 #include "qapi/error.h" 41 #include "qemu/error-report.h" 42 #include "qemu/bitmap.h" 43 #include "qemu/timer.h" 44 #include "sysemu/block-backend.h" 45 #include "qemu/host-utils.h" 46 #include "qemu/module.h" 47 #include "hw/sysbus.h" 48 #include "migration/vmstate.h" 49 #include "trace.h" 50 51 #define PFLASH_LAZY_ROMD_THRESHOLD 42 52 53 /* 54 * The size of the cfi_table indirectly depends on this and the start of the 55 * PRI table directly depends on it. 4 is the maximum size (and also what 56 * seems common) without changing the PRT table address. 57 */ 58 #define PFLASH_MAX_ERASE_REGIONS 4 59 60 /* Special write cycles for CFI queries. */ 61 enum { 62 WCYCLE_CFI = 7, 63 WCYCLE_AUTOSELECT_CFI = 8, 64 }; 65 66 struct PFlashCFI02 { 67 /*< private >*/ 68 SysBusDevice parent_obj; 69 /*< public >*/ 70 71 BlockBackend *blk; 72 uint32_t uniform_nb_blocs; 73 uint32_t uniform_sector_len; 74 uint32_t total_sectors; 75 uint32_t nb_blocs[PFLASH_MAX_ERASE_REGIONS]; 76 uint32_t sector_len[PFLASH_MAX_ERASE_REGIONS]; 77 uint32_t chip_len; 78 uint8_t mappings; 79 uint8_t width; 80 uint8_t be; 81 int wcycle; /* if 0, the flash is read normally */ 82 int bypass; 83 int ro; 84 uint8_t cmd; 85 uint8_t status; 86 /* FIXME: implement array device properties */ 87 uint16_t ident0; 88 uint16_t ident1; 89 uint16_t ident2; 90 uint16_t ident3; 91 uint16_t unlock_addr0; 92 uint16_t unlock_addr1; 93 uint8_t cfi_table[0x4d]; 94 QEMUTimer timer; 95 /* 96 * The device replicates the flash memory across its memory space. Emulate 97 * that by having a container (.mem) filled with an array of aliases 98 * (.mem_mappings) pointing to the flash memory (.orig_mem). 99 */ 100 MemoryRegion mem; 101 MemoryRegion *mem_mappings; /* array; one per mapping */ 102 MemoryRegion orig_mem; 103 bool rom_mode; 104 int read_counter; /* used for lazy switch-back to rom mode */ 105 int sectors_to_erase; 106 uint64_t erase_time_remaining; 107 unsigned long *sector_erase_map; 108 char *name; 109 void *storage; 110 }; 111 112 /* 113 * Toggle status bit DQ7. 114 */ 115 static inline void toggle_dq7(PFlashCFI02 *pfl) 116 { 117 pfl->status ^= 0x80; 118 } 119 120 /* 121 * Set status bit DQ7 to bit 7 of value. 122 */ 123 static inline void set_dq7(PFlashCFI02 *pfl, uint8_t value) 124 { 125 pfl->status &= 0x7F; 126 pfl->status |= value & 0x80; 127 } 128 129 /* 130 * Toggle status bit DQ6. 131 */ 132 static inline void toggle_dq6(PFlashCFI02 *pfl) 133 { 134 pfl->status ^= 0x40; 135 } 136 137 /* 138 * Turn on DQ3. 139 */ 140 static inline void assert_dq3(PFlashCFI02 *pfl) 141 { 142 pfl->status |= 0x08; 143 } 144 145 /* 146 * Turn off DQ3. 147 */ 148 static inline void reset_dq3(PFlashCFI02 *pfl) 149 { 150 pfl->status &= ~0x08; 151 } 152 153 /* 154 * Toggle status bit DQ2. 155 */ 156 static inline void toggle_dq2(PFlashCFI02 *pfl) 157 { 158 pfl->status ^= 0x04; 159 } 160 161 /* 162 * Set up replicated mappings of the same region. 163 */ 164 static void pflash_setup_mappings(PFlashCFI02 *pfl) 165 { 166 unsigned i; 167 hwaddr size = memory_region_size(&pfl->orig_mem); 168 169 memory_region_init(&pfl->mem, OBJECT(pfl), "pflash", pfl->mappings * size); 170 pfl->mem_mappings = g_new(MemoryRegion, pfl->mappings); 171 for (i = 0; i < pfl->mappings; ++i) { 172 memory_region_init_alias(&pfl->mem_mappings[i], OBJECT(pfl), 173 "pflash-alias", &pfl->orig_mem, 0, size); 174 memory_region_add_subregion(&pfl->mem, i * size, &pfl->mem_mappings[i]); 175 } 176 } 177 178 static void pflash_reset_state_machine(PFlashCFI02 *pfl) 179 { 180 trace_pflash_reset(pfl->name); 181 pfl->cmd = 0x00; 182 pfl->wcycle = 0; 183 } 184 185 static void pflash_mode_read_array(PFlashCFI02 *pfl) 186 { 187 trace_pflash_mode_read_array(pfl->name); 188 pflash_reset_state_machine(pfl); 189 pfl->rom_mode = true; 190 memory_region_rom_device_set_romd(&pfl->orig_mem, true); 191 } 192 193 static size_t pflash_regions_count(PFlashCFI02 *pfl) 194 { 195 return pfl->cfi_table[0x2c]; 196 } 197 198 /* 199 * Returns the time it takes to erase the number of sectors scheduled for 200 * erasure based on CFI address 0x21 which is "Typical timeout per individual 201 * block erase 2^N ms." 202 */ 203 static uint64_t pflash_erase_time(PFlashCFI02 *pfl) 204 { 205 /* 206 * If there are no sectors to erase (which can happen if all of the sectors 207 * to be erased are protected), then erase takes 100 us. Protected sectors 208 * aren't supported so this should never happen. 209 */ 210 return ((1ULL << pfl->cfi_table[0x21]) * pfl->sectors_to_erase) * SCALE_US; 211 } 212 213 /* 214 * Returns true if the device is currently in erase suspend mode. 215 */ 216 static inline bool pflash_erase_suspend_mode(PFlashCFI02 *pfl) 217 { 218 return pfl->erase_time_remaining > 0; 219 } 220 221 static void pflash_timer(void *opaque) 222 { 223 PFlashCFI02 *pfl = opaque; 224 225 trace_pflash_timer_expired(pfl->name, pfl->cmd); 226 if (pfl->cmd == 0x30) { 227 /* 228 * Sector erase. If DQ3 is 0 when the timer expires, then the 50 229 * us erase timeout has expired so we need to start the timer for the 230 * sector erase algorithm. Otherwise, the erase completed and we should 231 * go back to read array mode. 232 */ 233 if ((pfl->status & 0x08) == 0) { 234 assert_dq3(pfl); 235 uint64_t timeout = pflash_erase_time(pfl); 236 timer_mod(&pfl->timer, 237 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + timeout); 238 trace_pflash_erase_timeout(pfl->name, pfl->sectors_to_erase); 239 return; 240 } 241 trace_pflash_erase_complete(pfl->name); 242 bitmap_zero(pfl->sector_erase_map, pfl->total_sectors); 243 pfl->sectors_to_erase = 0; 244 reset_dq3(pfl); 245 } 246 247 /* Reset flash */ 248 toggle_dq7(pfl); 249 if (pfl->bypass) { 250 pfl->wcycle = 2; 251 pfl->cmd = 0; 252 } else { 253 pflash_mode_read_array(pfl); 254 } 255 } 256 257 /* 258 * Read data from flash. 259 */ 260 static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset, 261 unsigned int width) 262 { 263 uint8_t *p = (uint8_t *)pfl->storage + offset; 264 uint64_t ret = pfl->be ? ldn_be_p(p, width) : ldn_le_p(p, width); 265 trace_pflash_data_read(pfl->name, offset, width, ret); 266 return ret; 267 } 268 269 typedef struct { 270 uint32_t len; 271 uint32_t num; 272 } SectorInfo; 273 274 /* 275 * offset should be a byte offset of the QEMU device and _not_ a device 276 * offset. 277 */ 278 static SectorInfo pflash_sector_info(PFlashCFI02 *pfl, hwaddr offset) 279 { 280 assert(offset < pfl->chip_len); 281 hwaddr addr = 0; 282 uint32_t sector_num = 0; 283 for (int i = 0; i < pflash_regions_count(pfl); ++i) { 284 uint64_t region_size = (uint64_t)pfl->nb_blocs[i] * pfl->sector_len[i]; 285 if (addr <= offset && offset < addr + region_size) { 286 return (SectorInfo) { 287 .len = pfl->sector_len[i], 288 .num = sector_num + (offset - addr) / pfl->sector_len[i], 289 }; 290 } 291 sector_num += pfl->nb_blocs[i]; 292 addr += region_size; 293 } 294 abort(); 295 } 296 297 /* 298 * Returns true if the offset refers to a flash sector that is currently being 299 * erased. 300 */ 301 static bool pflash_sector_is_erasing(PFlashCFI02 *pfl, hwaddr offset) 302 { 303 long sector_num = pflash_sector_info(pfl, offset).num; 304 return test_bit(sector_num, pfl->sector_erase_map); 305 } 306 307 static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) 308 { 309 PFlashCFI02 *pfl = opaque; 310 hwaddr boff; 311 uint64_t ret; 312 313 /* Lazy reset to ROMD mode after a certain amount of read accesses */ 314 if (!pfl->rom_mode && pfl->wcycle == 0 && 315 ++pfl->read_counter > PFLASH_LAZY_ROMD_THRESHOLD) { 316 pflash_mode_read_array(pfl); 317 } 318 offset &= pfl->chip_len - 1; 319 boff = offset & 0xFF; 320 if (pfl->width == 2) { 321 boff = boff >> 1; 322 } else if (pfl->width == 4) { 323 boff = boff >> 2; 324 } 325 switch (pfl->cmd) { 326 default: 327 /* This should never happen : reset state & treat it as a read*/ 328 trace_pflash_read_unknown_state(pfl->name, pfl->cmd); 329 pflash_reset_state_machine(pfl); 330 /* fall through to the read code */ 331 case 0x80: /* Erase (unlock) */ 332 /* We accept reads during second unlock sequence... */ 333 case 0x00: 334 if (pflash_erase_suspend_mode(pfl) && 335 pflash_sector_is_erasing(pfl, offset)) { 336 /* Toggle bit 2, but not 6. */ 337 toggle_dq2(pfl); 338 /* Status register read */ 339 ret = pfl->status; 340 trace_pflash_read_status(pfl->name, ret); 341 break; 342 } 343 /* Flash area read */ 344 ret = pflash_data_read(pfl, offset, width); 345 break; 346 case 0x90: /* flash ID read */ 347 switch (boff) { 348 case 0x00: 349 case 0x01: 350 ret = boff & 0x01 ? pfl->ident1 : pfl->ident0; 351 break; 352 case 0x02: 353 ret = 0x00; /* Pretend all sectors are unprotected */ 354 break; 355 case 0x0E: 356 case 0x0F: 357 ret = boff & 0x01 ? pfl->ident3 : pfl->ident2; 358 if (ret != (uint8_t)-1) { 359 break; 360 } 361 /* Fall through to data read. */ 362 default: 363 ret = pflash_data_read(pfl, offset, width); 364 } 365 trace_pflash_read_done(pfl->name, boff, ret); 366 break; 367 case 0x10: /* Chip Erase */ 368 case 0x30: /* Sector Erase */ 369 /* Toggle bit 2 during erase, but not program. */ 370 toggle_dq2(pfl); 371 /* fall through */ 372 case 0xA0: /* Program */ 373 /* Toggle bit 6 */ 374 toggle_dq6(pfl); 375 /* Status register read */ 376 ret = pfl->status; 377 trace_pflash_read_status(pfl->name, ret); 378 break; 379 case 0x98: 380 /* CFI query mode */ 381 if (boff < sizeof(pfl->cfi_table)) { 382 ret = pfl->cfi_table[boff]; 383 } else { 384 ret = 0; 385 } 386 break; 387 } 388 trace_pflash_io_read(pfl->name, offset, width, ret, pfl->cmd, pfl->wcycle); 389 390 return ret; 391 } 392 393 /* update flash content on disk */ 394 static void pflash_update(PFlashCFI02 *pfl, int offset, int size) 395 { 396 int offset_end; 397 int ret; 398 if (pfl->blk) { 399 offset_end = offset + size; 400 /* widen to sector boundaries */ 401 offset = QEMU_ALIGN_DOWN(offset, BDRV_SECTOR_SIZE); 402 offset_end = QEMU_ALIGN_UP(offset_end, BDRV_SECTOR_SIZE); 403 ret = blk_pwrite(pfl->blk, offset, pfl->storage + offset, 404 offset_end - offset, 0); 405 if (ret < 0) { 406 /* TODO set error bit in status */ 407 error_report("Could not update PFLASH: %s", strerror(-ret)); 408 } 409 } 410 } 411 412 static void pflash_sector_erase(PFlashCFI02 *pfl, hwaddr offset) 413 { 414 SectorInfo sector_info = pflash_sector_info(pfl, offset); 415 uint64_t sector_len = sector_info.len; 416 offset &= ~(sector_len - 1); 417 trace_pflash_sector_erase_start(pfl->name, pfl->width * 2, offset, 418 pfl->width * 2, offset + sector_len - 1); 419 if (!pfl->ro) { 420 uint8_t *p = pfl->storage; 421 memset(p + offset, 0xff, sector_len); 422 pflash_update(pfl, offset, sector_len); 423 } 424 set_dq7(pfl, 0x00); 425 ++pfl->sectors_to_erase; 426 set_bit(sector_info.num, pfl->sector_erase_map); 427 /* Set (or reset) the 50 us timer for additional erase commands. */ 428 timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 50000); 429 } 430 431 static void pflash_write(void *opaque, hwaddr offset, uint64_t value, 432 unsigned int width) 433 { 434 PFlashCFI02 *pfl = opaque; 435 hwaddr boff; 436 uint8_t *p; 437 uint8_t cmd; 438 439 trace_pflash_io_write(pfl->name, offset, width, value, pfl->wcycle); 440 cmd = value; 441 if (pfl->cmd != 0xA0) { 442 /* Reset does nothing during chip erase and sector erase. */ 443 if (cmd == 0xF0 && pfl->cmd != 0x10 && pfl->cmd != 0x30) { 444 if (pfl->wcycle == WCYCLE_AUTOSELECT_CFI) { 445 /* Return to autoselect mode. */ 446 pfl->wcycle = 3; 447 pfl->cmd = 0x90; 448 return; 449 } 450 goto reset_flash; 451 } 452 } 453 offset &= pfl->chip_len - 1; 454 455 boff = offset; 456 if (pfl->width == 2) { 457 boff = boff >> 1; 458 } else if (pfl->width == 4) { 459 boff = boff >> 2; 460 } 461 /* Only the least-significant 11 bits are used in most cases. */ 462 boff &= 0x7FF; 463 switch (pfl->wcycle) { 464 case 0: 465 /* Set the device in I/O access mode if required */ 466 if (pfl->rom_mode) { 467 pfl->rom_mode = false; 468 memory_region_rom_device_set_romd(&pfl->orig_mem, false); 469 } 470 pfl->read_counter = 0; 471 /* We're in read mode */ 472 check_unlock0: 473 if (boff == 0x55 && cmd == 0x98) { 474 /* Enter CFI query mode */ 475 pfl->wcycle = WCYCLE_CFI; 476 pfl->cmd = 0x98; 477 return; 478 } 479 /* Handle erase resume in erase suspend mode, otherwise reset. */ 480 if (cmd == 0x30) { /* Erase Resume */ 481 if (pflash_erase_suspend_mode(pfl)) { 482 /* Resume the erase. */ 483 timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 484 pfl->erase_time_remaining); 485 pfl->erase_time_remaining = 0; 486 pfl->wcycle = 6; 487 pfl->cmd = 0x30; 488 set_dq7(pfl, 0x00); 489 assert_dq3(pfl); 490 return; 491 } 492 goto reset_flash; 493 } 494 /* Ignore erase suspend. */ 495 if (cmd == 0xB0) { /* Erase Suspend */ 496 return; 497 } 498 if (boff != pfl->unlock_addr0 || cmd != 0xAA) { 499 trace_pflash_unlock0_failed(pfl->name, boff, 500 cmd, pfl->unlock_addr0); 501 goto reset_flash; 502 } 503 trace_pflash_write(pfl->name, "unlock sequence started"); 504 break; 505 case 1: 506 /* We started an unlock sequence */ 507 check_unlock1: 508 if (boff != pfl->unlock_addr1 || cmd != 0x55) { 509 trace_pflash_unlock1_failed(pfl->name, boff, cmd); 510 goto reset_flash; 511 } 512 trace_pflash_write(pfl->name, "unlock sequence done"); 513 break; 514 case 2: 515 /* We finished an unlock sequence */ 516 if (!pfl->bypass && boff != pfl->unlock_addr0) { 517 trace_pflash_write_failed(pfl->name, boff, cmd); 518 goto reset_flash; 519 } 520 switch (cmd) { 521 case 0x20: 522 pfl->bypass = 1; 523 goto do_bypass; 524 case 0x80: /* Erase */ 525 case 0x90: /* Autoselect */ 526 case 0xA0: /* Program */ 527 pfl->cmd = cmd; 528 trace_pflash_write_start(pfl->name, cmd); 529 break; 530 default: 531 trace_pflash_write_unknown(pfl->name, cmd); 532 goto reset_flash; 533 } 534 break; 535 case 3: 536 switch (pfl->cmd) { 537 case 0x80: /* Erase */ 538 /* We need another unlock sequence */ 539 goto check_unlock0; 540 case 0xA0: /* Program */ 541 if (pflash_erase_suspend_mode(pfl) && 542 pflash_sector_is_erasing(pfl, offset)) { 543 /* Ignore writes to erasing sectors. */ 544 if (pfl->bypass) { 545 goto do_bypass; 546 } 547 goto reset_flash; 548 } 549 trace_pflash_data_write(pfl->name, offset, width, value, 0); 550 if (!pfl->ro) { 551 p = (uint8_t *)pfl->storage + offset; 552 if (pfl->be) { 553 uint64_t current = ldn_be_p(p, width); 554 stn_be_p(p, width, current & value); 555 } else { 556 uint64_t current = ldn_le_p(p, width); 557 stn_le_p(p, width, current & value); 558 } 559 pflash_update(pfl, offset, width); 560 } 561 /* 562 * While programming, status bit DQ7 should hold the opposite 563 * value from how it was programmed. 564 */ 565 set_dq7(pfl, ~value); 566 /* Let's pretend write is immediate */ 567 if (pfl->bypass) 568 goto do_bypass; 569 goto reset_flash; 570 case 0x90: /* Autoselect */ 571 if (pfl->bypass && cmd == 0x00) { 572 /* Unlock bypass reset */ 573 goto reset_flash; 574 } 575 /* 576 * We can enter CFI query mode from autoselect mode, but we must 577 * return to autoselect mode after a reset. 578 */ 579 if (boff == 0x55 && cmd == 0x98) { 580 /* Enter autoselect CFI query mode */ 581 pfl->wcycle = WCYCLE_AUTOSELECT_CFI; 582 pfl->cmd = 0x98; 583 return; 584 } 585 /* fall through */ 586 default: 587 trace_pflash_write_invalid(pfl->name, pfl->cmd); 588 goto reset_flash; 589 } 590 case 4: 591 switch (pfl->cmd) { 592 case 0xA0: /* Program */ 593 /* Ignore writes while flash data write is occurring */ 594 /* As we suppose write is immediate, this should never happen */ 595 return; 596 case 0x80: /* Erase */ 597 goto check_unlock1; 598 default: 599 /* Should never happen */ 600 trace_pflash_write_invalid_state(pfl->name, pfl->cmd, 5); 601 goto reset_flash; 602 } 603 break; 604 case 5: 605 if (pflash_erase_suspend_mode(pfl)) { 606 /* Erasing is not supported in erase suspend mode. */ 607 goto reset_flash; 608 } 609 switch (cmd) { 610 case 0x10: /* Chip Erase */ 611 if (boff != pfl->unlock_addr0) { 612 trace_pflash_chip_erase_invalid(pfl->name, offset); 613 goto reset_flash; 614 } 615 /* Chip erase */ 616 trace_pflash_chip_erase_start(pfl->name); 617 if (!pfl->ro) { 618 memset(pfl->storage, 0xff, pfl->chip_len); 619 pflash_update(pfl, 0, pfl->chip_len); 620 } 621 set_dq7(pfl, 0x00); 622 /* Wait the time specified at CFI address 0x22. */ 623 timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 624 (1ULL << pfl->cfi_table[0x22]) * SCALE_MS); 625 break; 626 case 0x30: /* Sector erase */ 627 pflash_sector_erase(pfl, offset); 628 break; 629 default: 630 trace_pflash_write_invalid_command(pfl->name, cmd); 631 goto reset_flash; 632 } 633 pfl->cmd = cmd; 634 break; 635 case 6: 636 switch (pfl->cmd) { 637 case 0x10: /* Chip Erase */ 638 /* Ignore writes during chip erase */ 639 return; 640 case 0x30: /* Sector erase */ 641 if (cmd == 0xB0) { 642 /* 643 * If erase suspend happens during the erase timeout (so DQ3 is 644 * 0), then the device suspends erasing immediately. Set the 645 * remaining time to be the total time to erase. Otherwise, 646 * there is a maximum amount of time it can take to enter 647 * suspend mode. Let's ignore that and suspend immediately and 648 * set the remaining time to the actual time remaining on the 649 * timer. 650 */ 651 if ((pfl->status & 0x08) == 0) { 652 pfl->erase_time_remaining = pflash_erase_time(pfl); 653 } else { 654 int64_t delta = timer_expire_time_ns(&pfl->timer) - 655 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 656 /* Make sure we have a positive time remaining. */ 657 pfl->erase_time_remaining = delta <= 0 ? 1 : delta; 658 } 659 reset_dq3(pfl); 660 timer_del(&pfl->timer); 661 pflash_reset_state_machine(pfl); 662 return; 663 } 664 /* 665 * If DQ3 is 0, additional sector erase commands can be 666 * written and anything else (other than an erase suspend) resets 667 * the device. 668 */ 669 if ((pfl->status & 0x08) == 0) { 670 if (cmd == 0x30) { 671 pflash_sector_erase(pfl, offset); 672 } else { 673 goto reset_flash; 674 } 675 } 676 /* Ignore writes during the actual erase. */ 677 return; 678 default: 679 /* Should never happen */ 680 trace_pflash_write_invalid_state(pfl->name, pfl->cmd, 6); 681 goto reset_flash; 682 } 683 break; 684 /* Special values for CFI queries */ 685 case WCYCLE_CFI: 686 case WCYCLE_AUTOSELECT_CFI: 687 trace_pflash_write(pfl->name, "invalid write in CFI query mode"); 688 goto reset_flash; 689 default: 690 /* Should never happen */ 691 trace_pflash_write(pfl->name, "invalid write state (wc 7)"); 692 goto reset_flash; 693 } 694 pfl->wcycle++; 695 696 return; 697 698 /* Reset flash */ 699 reset_flash: 700 pfl->bypass = 0; 701 pflash_reset_state_machine(pfl); 702 return; 703 704 do_bypass: 705 pfl->wcycle = 2; 706 pfl->cmd = 0; 707 } 708 709 static const MemoryRegionOps pflash_cfi02_ops = { 710 .read = pflash_read, 711 .write = pflash_write, 712 .valid.min_access_size = 1, 713 .valid.max_access_size = 4, 714 .endianness = DEVICE_NATIVE_ENDIAN, 715 }; 716 717 static void pflash_cfi02_fill_cfi_table(PFlashCFI02 *pfl, int nb_regions) 718 { 719 /* Hardcoded CFI table (mostly from SG29 Spansion flash) */ 720 const uint16_t pri_ofs = 0x40; 721 /* Standard "QRY" string */ 722 pfl->cfi_table[0x10] = 'Q'; 723 pfl->cfi_table[0x11] = 'R'; 724 pfl->cfi_table[0x12] = 'Y'; 725 /* Command set (AMD/Fujitsu) */ 726 pfl->cfi_table[0x13] = 0x02; 727 pfl->cfi_table[0x14] = 0x00; 728 /* Primary extended table address */ 729 pfl->cfi_table[0x15] = pri_ofs; 730 pfl->cfi_table[0x16] = pri_ofs >> 8; 731 /* Alternate command set (none) */ 732 pfl->cfi_table[0x17] = 0x00; 733 pfl->cfi_table[0x18] = 0x00; 734 /* Alternate extended table (none) */ 735 pfl->cfi_table[0x19] = 0x00; 736 pfl->cfi_table[0x1A] = 0x00; 737 /* Vcc min */ 738 pfl->cfi_table[0x1B] = 0x27; 739 /* Vcc max */ 740 pfl->cfi_table[0x1C] = 0x36; 741 /* Vpp min (no Vpp pin) */ 742 pfl->cfi_table[0x1D] = 0x00; 743 /* Vpp max (no Vpp pin) */ 744 pfl->cfi_table[0x1E] = 0x00; 745 /* Timeout per single byte/word write (128 ms) */ 746 pfl->cfi_table[0x1F] = 0x07; 747 /* Timeout for min size buffer write (NA) */ 748 pfl->cfi_table[0x20] = 0x00; 749 /* Typical timeout for block erase (512 ms) */ 750 pfl->cfi_table[0x21] = 0x09; 751 /* Typical timeout for full chip erase (4096 ms) */ 752 pfl->cfi_table[0x22] = 0x0C; 753 /* Reserved */ 754 pfl->cfi_table[0x23] = 0x01; 755 /* Max timeout for buffer write (NA) */ 756 pfl->cfi_table[0x24] = 0x00; 757 /* Max timeout for block erase */ 758 pfl->cfi_table[0x25] = 0x0A; 759 /* Max timeout for chip erase */ 760 pfl->cfi_table[0x26] = 0x0D; 761 /* Device size */ 762 pfl->cfi_table[0x27] = ctz32(pfl->chip_len); 763 /* Flash device interface (8 & 16 bits) */ 764 pfl->cfi_table[0x28] = 0x02; 765 pfl->cfi_table[0x29] = 0x00; 766 /* Max number of bytes in multi-bytes write */ 767 /* 768 * XXX: disable buffered write as it's not supported 769 * pfl->cfi_table[0x2A] = 0x05; 770 */ 771 pfl->cfi_table[0x2A] = 0x00; 772 pfl->cfi_table[0x2B] = 0x00; 773 /* Number of erase block regions */ 774 pfl->cfi_table[0x2c] = nb_regions; 775 /* Erase block regions */ 776 for (int i = 0; i < nb_regions; ++i) { 777 uint32_t sector_len_per_device = pfl->sector_len[i]; 778 pfl->cfi_table[0x2d + 4 * i] = pfl->nb_blocs[i] - 1; 779 pfl->cfi_table[0x2e + 4 * i] = (pfl->nb_blocs[i] - 1) >> 8; 780 pfl->cfi_table[0x2f + 4 * i] = sector_len_per_device >> 8; 781 pfl->cfi_table[0x30 + 4 * i] = sector_len_per_device >> 16; 782 } 783 assert(0x2c + 4 * nb_regions < pri_ofs); 784 785 /* Extended */ 786 pfl->cfi_table[0x00 + pri_ofs] = 'P'; 787 pfl->cfi_table[0x01 + pri_ofs] = 'R'; 788 pfl->cfi_table[0x02 + pri_ofs] = 'I'; 789 790 /* Extended version 1.0 */ 791 pfl->cfi_table[0x03 + pri_ofs] = '1'; 792 pfl->cfi_table[0x04 + pri_ofs] = '0'; 793 794 /* Address sensitive unlock required. */ 795 pfl->cfi_table[0x05 + pri_ofs] = 0x00; 796 /* Erase suspend to read/write. */ 797 pfl->cfi_table[0x06 + pri_ofs] = 0x02; 798 /* Sector protect not supported. */ 799 pfl->cfi_table[0x07 + pri_ofs] = 0x00; 800 /* Temporary sector unprotect not supported. */ 801 pfl->cfi_table[0x08 + pri_ofs] = 0x00; 802 803 /* Sector protect/unprotect scheme. */ 804 pfl->cfi_table[0x09 + pri_ofs] = 0x00; 805 806 /* Simultaneous operation not supported. */ 807 pfl->cfi_table[0x0a + pri_ofs] = 0x00; 808 /* Burst mode not supported. */ 809 pfl->cfi_table[0x0b + pri_ofs] = 0x00; 810 /* Page mode not supported. */ 811 pfl->cfi_table[0x0c + pri_ofs] = 0x00; 812 assert(0x0c + pri_ofs < ARRAY_SIZE(pfl->cfi_table)); 813 } 814 815 static void pflash_cfi02_realize(DeviceState *dev, Error **errp) 816 { 817 ERRP_GUARD(); 818 PFlashCFI02 *pfl = PFLASH_CFI02(dev); 819 int ret; 820 821 if (pfl->uniform_sector_len == 0 && pfl->sector_len[0] == 0) { 822 error_setg(errp, "attribute \"sector-length\" not specified or zero."); 823 return; 824 } 825 if (pfl->uniform_nb_blocs == 0 && pfl->nb_blocs[0] == 0) { 826 error_setg(errp, "attribute \"num-blocks\" not specified or zero."); 827 return; 828 } 829 if (pfl->name == NULL) { 830 error_setg(errp, "attribute \"name\" not specified."); 831 return; 832 } 833 834 int nb_regions; 835 pfl->chip_len = 0; 836 pfl->total_sectors = 0; 837 for (nb_regions = 0; nb_regions < PFLASH_MAX_ERASE_REGIONS; ++nb_regions) { 838 if (pfl->nb_blocs[nb_regions] == 0) { 839 break; 840 } 841 pfl->total_sectors += pfl->nb_blocs[nb_regions]; 842 uint64_t sector_len_per_device = pfl->sector_len[nb_regions]; 843 844 /* 845 * The size of each flash sector must be a power of 2 and it must be 846 * aligned at the same power of 2. 847 */ 848 if (sector_len_per_device & 0xff || 849 sector_len_per_device >= (1 << 24) || 850 !is_power_of_2(sector_len_per_device)) 851 { 852 error_setg(errp, "unsupported configuration: " 853 "sector length[%d] per device = %" PRIx64 ".", 854 nb_regions, sector_len_per_device); 855 return; 856 } 857 if (pfl->chip_len & (sector_len_per_device - 1)) { 858 error_setg(errp, "unsupported configuration: " 859 "flash region %d not correctly aligned.", 860 nb_regions); 861 return; 862 } 863 864 pfl->chip_len += (uint64_t)pfl->sector_len[nb_regions] * 865 pfl->nb_blocs[nb_regions]; 866 } 867 868 uint64_t uniform_len = (uint64_t)pfl->uniform_nb_blocs * 869 pfl->uniform_sector_len; 870 if (nb_regions == 0) { 871 nb_regions = 1; 872 pfl->nb_blocs[0] = pfl->uniform_nb_blocs; 873 pfl->sector_len[0] = pfl->uniform_sector_len; 874 pfl->chip_len = uniform_len; 875 pfl->total_sectors = pfl->uniform_nb_blocs; 876 } else if (uniform_len != 0 && uniform_len != pfl->chip_len) { 877 error_setg(errp, "\"num-blocks\"*\"sector-length\" " 878 "different from \"num-blocks0\"*\'sector-length0\" + ... + " 879 "\"num-blocks3\"*\"sector-length3\""); 880 return; 881 } 882 883 memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), 884 &pflash_cfi02_ops, pfl, pfl->name, 885 pfl->chip_len, errp); 886 if (*errp) { 887 return; 888 } 889 890 pfl->storage = memory_region_get_ram_ptr(&pfl->orig_mem); 891 892 if (pfl->blk) { 893 uint64_t perm; 894 pfl->ro = !blk_supports_write_perm(pfl->blk); 895 perm = BLK_PERM_CONSISTENT_READ | (pfl->ro ? 0 : BLK_PERM_WRITE); 896 ret = blk_set_perm(pfl->blk, perm, BLK_PERM_ALL, errp); 897 if (ret < 0) { 898 return; 899 } 900 } else { 901 pfl->ro = 0; 902 } 903 904 if (pfl->blk) { 905 if (!blk_check_size_and_read_all(pfl->blk, pfl->storage, 906 pfl->chip_len, errp)) { 907 vmstate_unregister_ram(&pfl->orig_mem, DEVICE(pfl)); 908 return; 909 } 910 } 911 912 /* Only 11 bits are used in the comparison. */ 913 pfl->unlock_addr0 &= 0x7FF; 914 pfl->unlock_addr1 &= 0x7FF; 915 916 /* Allocate memory for a bitmap for sectors being erased. */ 917 pfl->sector_erase_map = bitmap_new(pfl->total_sectors); 918 919 pfl->rom_mode = true; 920 if (pfl->mappings > 1) { 921 pflash_setup_mappings(pfl); 922 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem); 923 } else { 924 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->orig_mem); 925 } 926 927 timer_init_ns(&pfl->timer, QEMU_CLOCK_VIRTUAL, pflash_timer, pfl); 928 pfl->status = 0; 929 930 pflash_cfi02_fill_cfi_table(pfl, nb_regions); 931 } 932 933 static void pflash_cfi02_reset(DeviceState *dev) 934 { 935 PFlashCFI02 *pfl = PFLASH_CFI02(dev); 936 937 pflash_reset_state_machine(pfl); 938 } 939 940 static Property pflash_cfi02_properties[] = { 941 DEFINE_PROP_DRIVE("drive", PFlashCFI02, blk), 942 DEFINE_PROP_UINT32("num-blocks", PFlashCFI02, uniform_nb_blocs, 0), 943 DEFINE_PROP_UINT32("sector-length", PFlashCFI02, uniform_sector_len, 0), 944 DEFINE_PROP_UINT32("num-blocks0", PFlashCFI02, nb_blocs[0], 0), 945 DEFINE_PROP_UINT32("sector-length0", PFlashCFI02, sector_len[0], 0), 946 DEFINE_PROP_UINT32("num-blocks1", PFlashCFI02, nb_blocs[1], 0), 947 DEFINE_PROP_UINT32("sector-length1", PFlashCFI02, sector_len[1], 0), 948 DEFINE_PROP_UINT32("num-blocks2", PFlashCFI02, nb_blocs[2], 0), 949 DEFINE_PROP_UINT32("sector-length2", PFlashCFI02, sector_len[2], 0), 950 DEFINE_PROP_UINT32("num-blocks3", PFlashCFI02, nb_blocs[3], 0), 951 DEFINE_PROP_UINT32("sector-length3", PFlashCFI02, sector_len[3], 0), 952 DEFINE_PROP_UINT8("width", PFlashCFI02, width, 0), 953 DEFINE_PROP_UINT8("mappings", PFlashCFI02, mappings, 0), 954 DEFINE_PROP_UINT8("big-endian", PFlashCFI02, be, 0), 955 DEFINE_PROP_UINT16("id0", PFlashCFI02, ident0, 0), 956 DEFINE_PROP_UINT16("id1", PFlashCFI02, ident1, 0), 957 DEFINE_PROP_UINT16("id2", PFlashCFI02, ident2, 0), 958 DEFINE_PROP_UINT16("id3", PFlashCFI02, ident3, 0), 959 DEFINE_PROP_UINT16("unlock-addr0", PFlashCFI02, unlock_addr0, 0), 960 DEFINE_PROP_UINT16("unlock-addr1", PFlashCFI02, unlock_addr1, 0), 961 DEFINE_PROP_STRING("name", PFlashCFI02, name), 962 DEFINE_PROP_END_OF_LIST(), 963 }; 964 965 static void pflash_cfi02_unrealize(DeviceState *dev) 966 { 967 PFlashCFI02 *pfl = PFLASH_CFI02(dev); 968 timer_del(&pfl->timer); 969 g_free(pfl->sector_erase_map); 970 } 971 972 static void pflash_cfi02_class_init(ObjectClass *klass, void *data) 973 { 974 DeviceClass *dc = DEVICE_CLASS(klass); 975 976 dc->realize = pflash_cfi02_realize; 977 dc->reset = pflash_cfi02_reset; 978 dc->unrealize = pflash_cfi02_unrealize; 979 device_class_set_props(dc, pflash_cfi02_properties); 980 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 981 } 982 983 static const TypeInfo pflash_cfi02_info = { 984 .name = TYPE_PFLASH_CFI02, 985 .parent = TYPE_SYS_BUS_DEVICE, 986 .instance_size = sizeof(PFlashCFI02), 987 .class_init = pflash_cfi02_class_init, 988 }; 989 990 static void pflash_cfi02_register_types(void) 991 { 992 type_register_static(&pflash_cfi02_info); 993 } 994 995 type_init(pflash_cfi02_register_types) 996 997 PFlashCFI02 *pflash_cfi02_register(hwaddr base, 998 const char *name, 999 hwaddr size, 1000 BlockBackend *blk, 1001 uint32_t sector_len, 1002 int nb_mappings, int width, 1003 uint16_t id0, uint16_t id1, 1004 uint16_t id2, uint16_t id3, 1005 uint16_t unlock_addr0, 1006 uint16_t unlock_addr1, 1007 int be) 1008 { 1009 DeviceState *dev = qdev_new(TYPE_PFLASH_CFI02); 1010 1011 if (blk) { 1012 qdev_prop_set_drive(dev, "drive", blk); 1013 } 1014 assert(QEMU_IS_ALIGNED(size, sector_len)); 1015 qdev_prop_set_uint32(dev, "num-blocks", size / sector_len); 1016 qdev_prop_set_uint32(dev, "sector-length", sector_len); 1017 qdev_prop_set_uint8(dev, "width", width); 1018 qdev_prop_set_uint8(dev, "mappings", nb_mappings); 1019 qdev_prop_set_uint8(dev, "big-endian", !!be); 1020 qdev_prop_set_uint16(dev, "id0", id0); 1021 qdev_prop_set_uint16(dev, "id1", id1); 1022 qdev_prop_set_uint16(dev, "id2", id2); 1023 qdev_prop_set_uint16(dev, "id3", id3); 1024 qdev_prop_set_uint16(dev, "unlock-addr0", unlock_addr0); 1025 qdev_prop_set_uint16(dev, "unlock-addr1", unlock_addr1); 1026 qdev_prop_set_string(dev, "name", name); 1027 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 1028 1029 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 1030 return PFLASH_CFI02(dev); 1031 } 1032