1 /* 2 * CFI parallel flash with AMD command set emulation 3 * 4 * Copyright (c) 2005 Jocelyn Mayer 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License as published by the Free Software Foundation; either 9 * version 2 of the License, or (at your option) any later version. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 18 */ 19 20 /* 21 * For now, this code can emulate flashes of 1, 2 or 4 bytes width. 22 * Supported commands/modes are: 23 * - flash read 24 * - flash write 25 * - flash ID read 26 * - sector erase 27 * - chip erase 28 * - unlock bypass command 29 * - CFI queries 30 * 31 * It does not support flash interleaving. 32 * It does not implement boot blocs with reduced size 33 * It does not implement software data protection as found in many real chips 34 * It does not implement erase suspend/resume commands 35 * It does not implement multiple sectors erase 36 */ 37 38 #include "qemu/osdep.h" 39 #include "hw/hw.h" 40 #include "hw/block/flash.h" 41 #include "qapi/error.h" 42 #include "qemu/timer.h" 43 #include "sysemu/block-backend.h" 44 #include "qemu/host-utils.h" 45 #include "hw/sysbus.h" 46 #include "trace.h" 47 48 //#define PFLASH_DEBUG 49 #ifdef PFLASH_DEBUG 50 #define DPRINTF(fmt, ...) \ 51 do { \ 52 fprintf(stderr, "PFLASH: " fmt , ## __VA_ARGS__); \ 53 } while (0) 54 #else 55 #define DPRINTF(fmt, ...) do { } while (0) 56 #endif 57 58 #define PFLASH_LAZY_ROMD_THRESHOLD 42 59 60 #define CFI_PFLASH02(obj) OBJECT_CHECK(pflash_t, (obj), TYPE_CFI_PFLASH02) 61 62 struct pflash_t { 63 /*< private >*/ 64 SysBusDevice parent_obj; 65 /*< public >*/ 66 67 BlockBackend *blk; 68 uint32_t sector_len; 69 uint32_t nb_blocs; 70 uint32_t chip_len; 71 uint8_t mappings; 72 uint8_t width; 73 uint8_t be; 74 int wcycle; /* if 0, the flash is read normally */ 75 int bypass; 76 int ro; 77 uint8_t cmd; 78 uint8_t status; 79 /* FIXME: implement array device properties */ 80 uint16_t ident0; 81 uint16_t ident1; 82 uint16_t ident2; 83 uint16_t ident3; 84 uint16_t unlock_addr0; 85 uint16_t unlock_addr1; 86 uint8_t cfi_table[0x52]; 87 QEMUTimer *timer; 88 /* The device replicates the flash memory across its memory space. Emulate 89 * that by having a container (.mem) filled with an array of aliases 90 * (.mem_mappings) pointing to the flash memory (.orig_mem). 91 */ 92 MemoryRegion mem; 93 MemoryRegion *mem_mappings; /* array; one per mapping */ 94 MemoryRegion orig_mem; 95 int rom_mode; 96 int read_counter; /* used for lazy switch-back to rom mode */ 97 char *name; 98 void *storage; 99 }; 100 101 /* 102 * Set up replicated mappings of the same region. 103 */ 104 static void pflash_setup_mappings(pflash_t *pfl) 105 { 106 unsigned i; 107 hwaddr size = memory_region_size(&pfl->orig_mem); 108 109 memory_region_init(&pfl->mem, OBJECT(pfl), "pflash", pfl->mappings * size); 110 pfl->mem_mappings = g_new(MemoryRegion, pfl->mappings); 111 for (i = 0; i < pfl->mappings; ++i) { 112 memory_region_init_alias(&pfl->mem_mappings[i], OBJECT(pfl), 113 "pflash-alias", &pfl->orig_mem, 0, size); 114 memory_region_add_subregion(&pfl->mem, i * size, &pfl->mem_mappings[i]); 115 } 116 } 117 118 static void pflash_register_memory(pflash_t *pfl, int rom_mode) 119 { 120 memory_region_rom_device_set_romd(&pfl->orig_mem, rom_mode); 121 pfl->rom_mode = rom_mode; 122 } 123 124 static void pflash_timer (void *opaque) 125 { 126 pflash_t *pfl = opaque; 127 128 trace_pflash_timer_expired(pfl->cmd); 129 /* Reset flash */ 130 pfl->status ^= 0x80; 131 if (pfl->bypass) { 132 pfl->wcycle = 2; 133 } else { 134 pflash_register_memory(pfl, 1); 135 pfl->wcycle = 0; 136 } 137 pfl->cmd = 0; 138 } 139 140 static uint32_t pflash_read (pflash_t *pfl, hwaddr offset, 141 int width, int be) 142 { 143 hwaddr boff; 144 uint32_t ret; 145 uint8_t *p; 146 147 ret = -1; 148 trace_pflash_read(offset, pfl->cmd, width, pfl->wcycle); 149 /* Lazy reset to ROMD mode after a certain amount of read accesses */ 150 if (!pfl->rom_mode && pfl->wcycle == 0 && 151 ++pfl->read_counter > PFLASH_LAZY_ROMD_THRESHOLD) { 152 pflash_register_memory(pfl, 1); 153 } 154 offset &= pfl->chip_len - 1; 155 boff = offset & 0xFF; 156 if (pfl->width == 2) 157 boff = boff >> 1; 158 else if (pfl->width == 4) 159 boff = boff >> 2; 160 switch (pfl->cmd) { 161 default: 162 /* This should never happen : reset state & treat it as a read*/ 163 DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd); 164 pfl->wcycle = 0; 165 pfl->cmd = 0; 166 /* fall through to the read code */ 167 case 0x80: 168 /* We accept reads during second unlock sequence... */ 169 case 0x00: 170 flash_read: 171 /* Flash area read */ 172 p = pfl->storage; 173 switch (width) { 174 case 1: 175 ret = p[offset]; 176 trace_pflash_data_read8(offset, ret); 177 break; 178 case 2: 179 if (be) { 180 ret = p[offset] << 8; 181 ret |= p[offset + 1]; 182 } else { 183 ret = p[offset]; 184 ret |= p[offset + 1] << 8; 185 } 186 trace_pflash_data_read16(offset, ret); 187 break; 188 case 4: 189 if (be) { 190 ret = p[offset] << 24; 191 ret |= p[offset + 1] << 16; 192 ret |= p[offset + 2] << 8; 193 ret |= p[offset + 3]; 194 } else { 195 ret = p[offset]; 196 ret |= p[offset + 1] << 8; 197 ret |= p[offset + 2] << 16; 198 ret |= p[offset + 3] << 24; 199 } 200 trace_pflash_data_read32(offset, ret); 201 break; 202 } 203 break; 204 case 0x90: 205 /* flash ID read */ 206 switch (boff) { 207 case 0x00: 208 case 0x01: 209 ret = boff & 0x01 ? pfl->ident1 : pfl->ident0; 210 break; 211 case 0x02: 212 ret = 0x00; /* Pretend all sectors are unprotected */ 213 break; 214 case 0x0E: 215 case 0x0F: 216 ret = boff & 0x01 ? pfl->ident3 : pfl->ident2; 217 if (ret == (uint8_t)-1) { 218 goto flash_read; 219 } 220 break; 221 default: 222 goto flash_read; 223 } 224 DPRINTF("%s: ID " TARGET_FMT_plx " %x\n", __func__, boff, ret); 225 break; 226 case 0xA0: 227 case 0x10: 228 case 0x30: 229 /* Status register read */ 230 ret = pfl->status; 231 DPRINTF("%s: status %x\n", __func__, ret); 232 /* Toggle bit 6 */ 233 pfl->status ^= 0x40; 234 break; 235 case 0x98: 236 /* CFI query mode */ 237 if (boff < sizeof(pfl->cfi_table)) { 238 ret = pfl->cfi_table[boff]; 239 } else { 240 ret = 0; 241 } 242 break; 243 } 244 245 return ret; 246 } 247 248 /* update flash content on disk */ 249 static void pflash_update(pflash_t *pfl, int offset, 250 int size) 251 { 252 int offset_end; 253 if (pfl->blk) { 254 offset_end = offset + size; 255 /* widen to sector boundaries */ 256 offset = QEMU_ALIGN_DOWN(offset, BDRV_SECTOR_SIZE); 257 offset_end = QEMU_ALIGN_UP(offset_end, BDRV_SECTOR_SIZE); 258 blk_pwrite(pfl->blk, offset, pfl->storage + offset, 259 offset_end - offset, 0); 260 } 261 } 262 263 static void pflash_write (pflash_t *pfl, hwaddr offset, 264 uint32_t value, int width, int be) 265 { 266 hwaddr boff; 267 uint8_t *p; 268 uint8_t cmd; 269 270 cmd = value; 271 if (pfl->cmd != 0xA0 && cmd == 0xF0) { 272 #if 0 273 DPRINTF("%s: flash reset asked (%02x %02x)\n", 274 __func__, pfl->cmd, cmd); 275 #endif 276 goto reset_flash; 277 } 278 trace_pflash_write(offset, value, width, pfl->wcycle); 279 offset &= pfl->chip_len - 1; 280 281 DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d\n", __func__, 282 offset, value, width); 283 boff = offset & (pfl->sector_len - 1); 284 if (pfl->width == 2) 285 boff = boff >> 1; 286 else if (pfl->width == 4) 287 boff = boff >> 2; 288 switch (pfl->wcycle) { 289 case 0: 290 /* Set the device in I/O access mode if required */ 291 if (pfl->rom_mode) 292 pflash_register_memory(pfl, 0); 293 pfl->read_counter = 0; 294 /* We're in read mode */ 295 check_unlock0: 296 if (boff == 0x55 && cmd == 0x98) { 297 enter_CFI_mode: 298 /* Enter CFI query mode */ 299 pfl->wcycle = 7; 300 pfl->cmd = 0x98; 301 return; 302 } 303 if (boff != pfl->unlock_addr0 || cmd != 0xAA) { 304 DPRINTF("%s: unlock0 failed " TARGET_FMT_plx " %02x %04x\n", 305 __func__, boff, cmd, pfl->unlock_addr0); 306 goto reset_flash; 307 } 308 DPRINTF("%s: unlock sequence started\n", __func__); 309 break; 310 case 1: 311 /* We started an unlock sequence */ 312 check_unlock1: 313 if (boff != pfl->unlock_addr1 || cmd != 0x55) { 314 DPRINTF("%s: unlock1 failed " TARGET_FMT_plx " %02x\n", __func__, 315 boff, cmd); 316 goto reset_flash; 317 } 318 DPRINTF("%s: unlock sequence done\n", __func__); 319 break; 320 case 2: 321 /* We finished an unlock sequence */ 322 if (!pfl->bypass && boff != pfl->unlock_addr0) { 323 DPRINTF("%s: command failed " TARGET_FMT_plx " %02x\n", __func__, 324 boff, cmd); 325 goto reset_flash; 326 } 327 switch (cmd) { 328 case 0x20: 329 pfl->bypass = 1; 330 goto do_bypass; 331 case 0x80: 332 case 0x90: 333 case 0xA0: 334 pfl->cmd = cmd; 335 DPRINTF("%s: starting command %02x\n", __func__, cmd); 336 break; 337 default: 338 DPRINTF("%s: unknown command %02x\n", __func__, cmd); 339 goto reset_flash; 340 } 341 break; 342 case 3: 343 switch (pfl->cmd) { 344 case 0x80: 345 /* We need another unlock sequence */ 346 goto check_unlock0; 347 case 0xA0: 348 trace_pflash_data_write(offset, value, width, 0); 349 p = pfl->storage; 350 if (!pfl->ro) { 351 switch (width) { 352 case 1: 353 p[offset] &= value; 354 pflash_update(pfl, offset, 1); 355 break; 356 case 2: 357 if (be) { 358 p[offset] &= value >> 8; 359 p[offset + 1] &= value; 360 } else { 361 p[offset] &= value; 362 p[offset + 1] &= value >> 8; 363 } 364 pflash_update(pfl, offset, 2); 365 break; 366 case 4: 367 if (be) { 368 p[offset] &= value >> 24; 369 p[offset + 1] &= value >> 16; 370 p[offset + 2] &= value >> 8; 371 p[offset + 3] &= value; 372 } else { 373 p[offset] &= value; 374 p[offset + 1] &= value >> 8; 375 p[offset + 2] &= value >> 16; 376 p[offset + 3] &= value >> 24; 377 } 378 pflash_update(pfl, offset, 4); 379 break; 380 } 381 } 382 pfl->status = 0x00 | ~(value & 0x80); 383 /* Let's pretend write is immediate */ 384 if (pfl->bypass) 385 goto do_bypass; 386 goto reset_flash; 387 case 0x90: 388 if (pfl->bypass && cmd == 0x00) { 389 /* Unlock bypass reset */ 390 goto reset_flash; 391 } 392 /* We can enter CFI query mode from autoselect mode */ 393 if (boff == 0x55 && cmd == 0x98) 394 goto enter_CFI_mode; 395 /* No break here */ 396 default: 397 DPRINTF("%s: invalid write for command %02x\n", 398 __func__, pfl->cmd); 399 goto reset_flash; 400 } 401 case 4: 402 switch (pfl->cmd) { 403 case 0xA0: 404 /* Ignore writes while flash data write is occurring */ 405 /* As we suppose write is immediate, this should never happen */ 406 return; 407 case 0x80: 408 goto check_unlock1; 409 default: 410 /* Should never happen */ 411 DPRINTF("%s: invalid command state %02x (wc 4)\n", 412 __func__, pfl->cmd); 413 goto reset_flash; 414 } 415 break; 416 case 5: 417 switch (cmd) { 418 case 0x10: 419 if (boff != pfl->unlock_addr0) { 420 DPRINTF("%s: chip erase: invalid address " TARGET_FMT_plx "\n", 421 __func__, offset); 422 goto reset_flash; 423 } 424 /* Chip erase */ 425 DPRINTF("%s: start chip erase\n", __func__); 426 if (!pfl->ro) { 427 memset(pfl->storage, 0xFF, pfl->chip_len); 428 pflash_update(pfl, 0, pfl->chip_len); 429 } 430 pfl->status = 0x00; 431 /* Let's wait 5 seconds before chip erase is done */ 432 timer_mod(pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 433 (NANOSECONDS_PER_SECOND * 5)); 434 break; 435 case 0x30: 436 /* Sector erase */ 437 p = pfl->storage; 438 offset &= ~(pfl->sector_len - 1); 439 DPRINTF("%s: start sector erase at " TARGET_FMT_plx "\n", __func__, 440 offset); 441 if (!pfl->ro) { 442 memset(p + offset, 0xFF, pfl->sector_len); 443 pflash_update(pfl, offset, pfl->sector_len); 444 } 445 pfl->status = 0x00; 446 /* Let's wait 1/2 second before sector erase is done */ 447 timer_mod(pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 448 (NANOSECONDS_PER_SECOND / 2)); 449 break; 450 default: 451 DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd); 452 goto reset_flash; 453 } 454 pfl->cmd = cmd; 455 break; 456 case 6: 457 switch (pfl->cmd) { 458 case 0x10: 459 /* Ignore writes during chip erase */ 460 return; 461 case 0x30: 462 /* Ignore writes during sector erase */ 463 return; 464 default: 465 /* Should never happen */ 466 DPRINTF("%s: invalid command state %02x (wc 6)\n", 467 __func__, pfl->cmd); 468 goto reset_flash; 469 } 470 break; 471 case 7: /* Special value for CFI queries */ 472 DPRINTF("%s: invalid write in CFI query mode\n", __func__); 473 goto reset_flash; 474 default: 475 /* Should never happen */ 476 DPRINTF("%s: invalid write state (wc 7)\n", __func__); 477 goto reset_flash; 478 } 479 pfl->wcycle++; 480 481 return; 482 483 /* Reset flash */ 484 reset_flash: 485 trace_pflash_reset(); 486 pfl->bypass = 0; 487 pfl->wcycle = 0; 488 pfl->cmd = 0; 489 return; 490 491 do_bypass: 492 pfl->wcycle = 2; 493 pfl->cmd = 0; 494 } 495 496 static uint64_t pflash_be_readfn(void *opaque, hwaddr addr, unsigned size) 497 { 498 return pflash_read(opaque, addr, size, 1); 499 } 500 501 static void pflash_be_writefn(void *opaque, hwaddr addr, 502 uint64_t value, unsigned size) 503 { 504 pflash_write(opaque, addr, value, size, 1); 505 } 506 507 static uint64_t pflash_le_readfn(void *opaque, hwaddr addr, unsigned size) 508 { 509 return pflash_read(opaque, addr, size, 0); 510 } 511 512 static void pflash_le_writefn(void *opaque, hwaddr addr, 513 uint64_t value, unsigned size) 514 { 515 pflash_write(opaque, addr, value, size, 0); 516 } 517 518 static const MemoryRegionOps pflash_cfi02_ops_be = { 519 .read = pflash_be_readfn, 520 .write = pflash_be_writefn, 521 .valid.min_access_size = 1, 522 .valid.max_access_size = 4, 523 .endianness = DEVICE_NATIVE_ENDIAN, 524 }; 525 526 static const MemoryRegionOps pflash_cfi02_ops_le = { 527 .read = pflash_le_readfn, 528 .write = pflash_le_writefn, 529 .valid.min_access_size = 1, 530 .valid.max_access_size = 4, 531 .endianness = DEVICE_NATIVE_ENDIAN, 532 }; 533 534 static void pflash_cfi02_realize(DeviceState *dev, Error **errp) 535 { 536 pflash_t *pfl = CFI_PFLASH02(dev); 537 uint32_t chip_len; 538 int ret; 539 Error *local_err = NULL; 540 541 if (pfl->sector_len == 0) { 542 error_setg(errp, "attribute \"sector-length\" not specified or zero."); 543 return; 544 } 545 if (pfl->nb_blocs == 0) { 546 error_setg(errp, "attribute \"num-blocks\" not specified or zero."); 547 return; 548 } 549 if (pfl->name == NULL) { 550 error_setg(errp, "attribute \"name\" not specified."); 551 return; 552 } 553 554 chip_len = pfl->sector_len * pfl->nb_blocs; 555 /* XXX: to be fixed */ 556 #if 0 557 if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) && 558 total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024)) 559 return NULL; 560 #endif 561 562 memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), pfl->be ? 563 &pflash_cfi02_ops_be : &pflash_cfi02_ops_le, 564 pfl, pfl->name, chip_len, &local_err); 565 if (local_err) { 566 error_propagate(errp, local_err); 567 return; 568 } 569 570 pfl->storage = memory_region_get_ram_ptr(&pfl->orig_mem); 571 pfl->chip_len = chip_len; 572 573 if (pfl->blk) { 574 uint64_t perm; 575 pfl->ro = blk_is_read_only(pfl->blk); 576 perm = BLK_PERM_CONSISTENT_READ | (pfl->ro ? 0 : BLK_PERM_WRITE); 577 ret = blk_set_perm(pfl->blk, perm, BLK_PERM_ALL, errp); 578 if (ret < 0) { 579 return; 580 } 581 } else { 582 pfl->ro = 0; 583 } 584 585 if (pfl->blk) { 586 /* read the initial flash content */ 587 ret = blk_pread(pfl->blk, 0, pfl->storage, chip_len); 588 if (ret < 0) { 589 vmstate_unregister_ram(&pfl->orig_mem, DEVICE(pfl)); 590 error_setg(errp, "failed to read the initial flash content"); 591 return; 592 } 593 } 594 595 pflash_setup_mappings(pfl); 596 pfl->rom_mode = 1; 597 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem); 598 599 pfl->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, pflash_timer, pfl); 600 pfl->wcycle = 0; 601 pfl->cmd = 0; 602 pfl->status = 0; 603 /* Hardcoded CFI table (mostly from SG29 Spansion flash) */ 604 /* Standard "QRY" string */ 605 pfl->cfi_table[0x10] = 'Q'; 606 pfl->cfi_table[0x11] = 'R'; 607 pfl->cfi_table[0x12] = 'Y'; 608 /* Command set (AMD/Fujitsu) */ 609 pfl->cfi_table[0x13] = 0x02; 610 pfl->cfi_table[0x14] = 0x00; 611 /* Primary extended table address */ 612 pfl->cfi_table[0x15] = 0x31; 613 pfl->cfi_table[0x16] = 0x00; 614 /* Alternate command set (none) */ 615 pfl->cfi_table[0x17] = 0x00; 616 pfl->cfi_table[0x18] = 0x00; 617 /* Alternate extended table (none) */ 618 pfl->cfi_table[0x19] = 0x00; 619 pfl->cfi_table[0x1A] = 0x00; 620 /* Vcc min */ 621 pfl->cfi_table[0x1B] = 0x27; 622 /* Vcc max */ 623 pfl->cfi_table[0x1C] = 0x36; 624 /* Vpp min (no Vpp pin) */ 625 pfl->cfi_table[0x1D] = 0x00; 626 /* Vpp max (no Vpp pin) */ 627 pfl->cfi_table[0x1E] = 0x00; 628 /* Reserved */ 629 pfl->cfi_table[0x1F] = 0x07; 630 /* Timeout for min size buffer write (NA) */ 631 pfl->cfi_table[0x20] = 0x00; 632 /* Typical timeout for block erase (512 ms) */ 633 pfl->cfi_table[0x21] = 0x09; 634 /* Typical timeout for full chip erase (4096 ms) */ 635 pfl->cfi_table[0x22] = 0x0C; 636 /* Reserved */ 637 pfl->cfi_table[0x23] = 0x01; 638 /* Max timeout for buffer write (NA) */ 639 pfl->cfi_table[0x24] = 0x00; 640 /* Max timeout for block erase */ 641 pfl->cfi_table[0x25] = 0x0A; 642 /* Max timeout for chip erase */ 643 pfl->cfi_table[0x26] = 0x0D; 644 /* Device size */ 645 pfl->cfi_table[0x27] = ctz32(chip_len); 646 /* Flash device interface (8 & 16 bits) */ 647 pfl->cfi_table[0x28] = 0x02; 648 pfl->cfi_table[0x29] = 0x00; 649 /* Max number of bytes in multi-bytes write */ 650 /* XXX: disable buffered write as it's not supported */ 651 // pfl->cfi_table[0x2A] = 0x05; 652 pfl->cfi_table[0x2A] = 0x00; 653 pfl->cfi_table[0x2B] = 0x00; 654 /* Number of erase block regions (uniform) */ 655 pfl->cfi_table[0x2C] = 0x01; 656 /* Erase block region 1 */ 657 pfl->cfi_table[0x2D] = pfl->nb_blocs - 1; 658 pfl->cfi_table[0x2E] = (pfl->nb_blocs - 1) >> 8; 659 pfl->cfi_table[0x2F] = pfl->sector_len >> 8; 660 pfl->cfi_table[0x30] = pfl->sector_len >> 16; 661 662 /* Extended */ 663 pfl->cfi_table[0x31] = 'P'; 664 pfl->cfi_table[0x32] = 'R'; 665 pfl->cfi_table[0x33] = 'I'; 666 667 pfl->cfi_table[0x34] = '1'; 668 pfl->cfi_table[0x35] = '0'; 669 670 pfl->cfi_table[0x36] = 0x00; 671 pfl->cfi_table[0x37] = 0x00; 672 pfl->cfi_table[0x38] = 0x00; 673 pfl->cfi_table[0x39] = 0x00; 674 675 pfl->cfi_table[0x3a] = 0x00; 676 677 pfl->cfi_table[0x3b] = 0x00; 678 pfl->cfi_table[0x3c] = 0x00; 679 } 680 681 static Property pflash_cfi02_properties[] = { 682 DEFINE_PROP_DRIVE("drive", struct pflash_t, blk), 683 DEFINE_PROP_UINT32("num-blocks", struct pflash_t, nb_blocs, 0), 684 DEFINE_PROP_UINT32("sector-length", struct pflash_t, sector_len, 0), 685 DEFINE_PROP_UINT8("width", struct pflash_t, width, 0), 686 DEFINE_PROP_UINT8("mappings", struct pflash_t, mappings, 0), 687 DEFINE_PROP_UINT8("big-endian", struct pflash_t, be, 0), 688 DEFINE_PROP_UINT16("id0", struct pflash_t, ident0, 0), 689 DEFINE_PROP_UINT16("id1", struct pflash_t, ident1, 0), 690 DEFINE_PROP_UINT16("id2", struct pflash_t, ident2, 0), 691 DEFINE_PROP_UINT16("id3", struct pflash_t, ident3, 0), 692 DEFINE_PROP_UINT16("unlock-addr0", struct pflash_t, unlock_addr0, 0), 693 DEFINE_PROP_UINT16("unlock-addr1", struct pflash_t, unlock_addr1, 0), 694 DEFINE_PROP_STRING("name", struct pflash_t, name), 695 DEFINE_PROP_END_OF_LIST(), 696 }; 697 698 static void pflash_cfi02_class_init(ObjectClass *klass, void *data) 699 { 700 DeviceClass *dc = DEVICE_CLASS(klass); 701 702 dc->realize = pflash_cfi02_realize; 703 dc->props = pflash_cfi02_properties; 704 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 705 } 706 707 static const TypeInfo pflash_cfi02_info = { 708 .name = TYPE_CFI_PFLASH02, 709 .parent = TYPE_SYS_BUS_DEVICE, 710 .instance_size = sizeof(struct pflash_t), 711 .class_init = pflash_cfi02_class_init, 712 }; 713 714 static void pflash_cfi02_register_types(void) 715 { 716 type_register_static(&pflash_cfi02_info); 717 } 718 719 type_init(pflash_cfi02_register_types) 720 721 pflash_t *pflash_cfi02_register(hwaddr base, 722 DeviceState *qdev, const char *name, 723 hwaddr size, 724 BlockBackend *blk, uint32_t sector_len, 725 int nb_blocs, int nb_mappings, int width, 726 uint16_t id0, uint16_t id1, 727 uint16_t id2, uint16_t id3, 728 uint16_t unlock_addr0, uint16_t unlock_addr1, 729 int be) 730 { 731 DeviceState *dev = qdev_create(NULL, TYPE_CFI_PFLASH02); 732 733 if (blk) { 734 qdev_prop_set_drive(dev, "drive", blk, &error_abort); 735 } 736 qdev_prop_set_uint32(dev, "num-blocks", nb_blocs); 737 qdev_prop_set_uint32(dev, "sector-length", sector_len); 738 qdev_prop_set_uint8(dev, "width", width); 739 qdev_prop_set_uint8(dev, "mappings", nb_mappings); 740 qdev_prop_set_uint8(dev, "big-endian", !!be); 741 qdev_prop_set_uint16(dev, "id0", id0); 742 qdev_prop_set_uint16(dev, "id1", id1); 743 qdev_prop_set_uint16(dev, "id2", id2); 744 qdev_prop_set_uint16(dev, "id3", id3); 745 qdev_prop_set_uint16(dev, "unlock-addr0", unlock_addr0); 746 qdev_prop_set_uint16(dev, "unlock-addr1", unlock_addr1); 747 qdev_prop_set_string(dev, "name", name); 748 qdev_init_nofail(dev); 749 750 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 751 return CFI_PFLASH02(dev); 752 } 753