1 /* 2 * CFI parallel flash with AMD command set emulation 3 * 4 * Copyright (c) 2005 Jocelyn Mayer 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License as published by the Free Software Foundation; either 9 * version 2 of the License, or (at your option) any later version. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 18 */ 19 20 /* 21 * For now, this code can emulate flashes of 1, 2 or 4 bytes width. 22 * Supported commands/modes are: 23 * - flash read 24 * - flash write 25 * - flash ID read 26 * - sector erase 27 * - chip erase 28 * - unlock bypass command 29 * - CFI queries 30 * 31 * It does not support flash interleaving. 32 * It does not implement boot blocs with reduced size 33 * It does not implement software data protection as found in many real chips 34 * It does not implement erase suspend/resume commands 35 * It does not implement multiple sectors erase 36 */ 37 38 #include "qemu/osdep.h" 39 #include "hw/hw.h" 40 #include "hw/block/flash.h" 41 #include "qapi/error.h" 42 #include "qemu/timer.h" 43 #include "sysemu/block-backend.h" 44 #include "qemu/host-utils.h" 45 #include "hw/sysbus.h" 46 47 //#define PFLASH_DEBUG 48 #ifdef PFLASH_DEBUG 49 #define DPRINTF(fmt, ...) \ 50 do { \ 51 fprintf(stderr, "PFLASH: " fmt , ## __VA_ARGS__); \ 52 } while (0) 53 #else 54 #define DPRINTF(fmt, ...) do { } while (0) 55 #endif 56 57 #define PFLASH_LAZY_ROMD_THRESHOLD 42 58 59 #define CFI_PFLASH02(obj) OBJECT_CHECK(pflash_t, (obj), TYPE_CFI_PFLASH02) 60 61 struct pflash_t { 62 /*< private >*/ 63 SysBusDevice parent_obj; 64 /*< public >*/ 65 66 BlockBackend *blk; 67 uint32_t sector_len; 68 uint32_t nb_blocs; 69 uint32_t chip_len; 70 uint8_t mappings; 71 uint8_t width; 72 uint8_t be; 73 int wcycle; /* if 0, the flash is read normally */ 74 int bypass; 75 int ro; 76 uint8_t cmd; 77 uint8_t status; 78 /* FIXME: implement array device properties */ 79 uint16_t ident0; 80 uint16_t ident1; 81 uint16_t ident2; 82 uint16_t ident3; 83 uint16_t unlock_addr0; 84 uint16_t unlock_addr1; 85 uint8_t cfi_table[0x52]; 86 QEMUTimer *timer; 87 /* The device replicates the flash memory across its memory space. Emulate 88 * that by having a container (.mem) filled with an array of aliases 89 * (.mem_mappings) pointing to the flash memory (.orig_mem). 90 */ 91 MemoryRegion mem; 92 MemoryRegion *mem_mappings; /* array; one per mapping */ 93 MemoryRegion orig_mem; 94 int rom_mode; 95 int read_counter; /* used for lazy switch-back to rom mode */ 96 char *name; 97 void *storage; 98 }; 99 100 /* 101 * Set up replicated mappings of the same region. 102 */ 103 static void pflash_setup_mappings(pflash_t *pfl) 104 { 105 unsigned i; 106 hwaddr size = memory_region_size(&pfl->orig_mem); 107 108 memory_region_init(&pfl->mem, OBJECT(pfl), "pflash", pfl->mappings * size); 109 pfl->mem_mappings = g_new(MemoryRegion, pfl->mappings); 110 for (i = 0; i < pfl->mappings; ++i) { 111 memory_region_init_alias(&pfl->mem_mappings[i], OBJECT(pfl), 112 "pflash-alias", &pfl->orig_mem, 0, size); 113 memory_region_add_subregion(&pfl->mem, i * size, &pfl->mem_mappings[i]); 114 } 115 } 116 117 static void pflash_register_memory(pflash_t *pfl, int rom_mode) 118 { 119 memory_region_rom_device_set_romd(&pfl->orig_mem, rom_mode); 120 pfl->rom_mode = rom_mode; 121 } 122 123 static void pflash_timer (void *opaque) 124 { 125 pflash_t *pfl = opaque; 126 127 DPRINTF("%s: command %02x done\n", __func__, pfl->cmd); 128 /* Reset flash */ 129 pfl->status ^= 0x80; 130 if (pfl->bypass) { 131 pfl->wcycle = 2; 132 } else { 133 pflash_register_memory(pfl, 1); 134 pfl->wcycle = 0; 135 } 136 pfl->cmd = 0; 137 } 138 139 static uint32_t pflash_read (pflash_t *pfl, hwaddr offset, 140 int width, int be) 141 { 142 hwaddr boff; 143 uint32_t ret; 144 uint8_t *p; 145 146 DPRINTF("%s: offset " TARGET_FMT_plx "\n", __func__, offset); 147 ret = -1; 148 /* Lazy reset to ROMD mode after a certain amount of read accesses */ 149 if (!pfl->rom_mode && pfl->wcycle == 0 && 150 ++pfl->read_counter > PFLASH_LAZY_ROMD_THRESHOLD) { 151 pflash_register_memory(pfl, 1); 152 } 153 offset &= pfl->chip_len - 1; 154 boff = offset & 0xFF; 155 if (pfl->width == 2) 156 boff = boff >> 1; 157 else if (pfl->width == 4) 158 boff = boff >> 2; 159 switch (pfl->cmd) { 160 default: 161 /* This should never happen : reset state & treat it as a read*/ 162 DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd); 163 pfl->wcycle = 0; 164 pfl->cmd = 0; 165 /* fall through to the read code */ 166 case 0x80: 167 /* We accept reads during second unlock sequence... */ 168 case 0x00: 169 flash_read: 170 /* Flash area read */ 171 p = pfl->storage; 172 switch (width) { 173 case 1: 174 ret = p[offset]; 175 // DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret); 176 break; 177 case 2: 178 if (be) { 179 ret = p[offset] << 8; 180 ret |= p[offset + 1]; 181 } else { 182 ret = p[offset]; 183 ret |= p[offset + 1] << 8; 184 } 185 // DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret); 186 break; 187 case 4: 188 if (be) { 189 ret = p[offset] << 24; 190 ret |= p[offset + 1] << 16; 191 ret |= p[offset + 2] << 8; 192 ret |= p[offset + 3]; 193 } else { 194 ret = p[offset]; 195 ret |= p[offset + 1] << 8; 196 ret |= p[offset + 2] << 16; 197 ret |= p[offset + 3] << 24; 198 } 199 // DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret); 200 break; 201 } 202 break; 203 case 0x90: 204 /* flash ID read */ 205 switch (boff) { 206 case 0x00: 207 case 0x01: 208 ret = boff & 0x01 ? pfl->ident1 : pfl->ident0; 209 break; 210 case 0x02: 211 ret = 0x00; /* Pretend all sectors are unprotected */ 212 break; 213 case 0x0E: 214 case 0x0F: 215 ret = boff & 0x01 ? pfl->ident3 : pfl->ident2; 216 if (ret == (uint8_t)-1) { 217 goto flash_read; 218 } 219 break; 220 default: 221 goto flash_read; 222 } 223 DPRINTF("%s: ID " TARGET_FMT_plx " %x\n", __func__, boff, ret); 224 break; 225 case 0xA0: 226 case 0x10: 227 case 0x30: 228 /* Status register read */ 229 ret = pfl->status; 230 DPRINTF("%s: status %x\n", __func__, ret); 231 /* Toggle bit 6 */ 232 pfl->status ^= 0x40; 233 break; 234 case 0x98: 235 /* CFI query mode */ 236 if (boff < sizeof(pfl->cfi_table)) { 237 ret = pfl->cfi_table[boff]; 238 } else { 239 ret = 0; 240 } 241 break; 242 } 243 244 return ret; 245 } 246 247 /* update flash content on disk */ 248 static void pflash_update(pflash_t *pfl, int offset, 249 int size) 250 { 251 int offset_end; 252 if (pfl->blk) { 253 offset_end = offset + size; 254 /* widen to sector boundaries */ 255 offset = QEMU_ALIGN_DOWN(offset, BDRV_SECTOR_SIZE); 256 offset_end = QEMU_ALIGN_UP(offset_end, BDRV_SECTOR_SIZE); 257 blk_pwrite(pfl->blk, offset, pfl->storage + offset, 258 offset_end - offset, 0); 259 } 260 } 261 262 static void pflash_write (pflash_t *pfl, hwaddr offset, 263 uint32_t value, int width, int be) 264 { 265 hwaddr boff; 266 uint8_t *p; 267 uint8_t cmd; 268 269 cmd = value; 270 if (pfl->cmd != 0xA0 && cmd == 0xF0) { 271 #if 0 272 DPRINTF("%s: flash reset asked (%02x %02x)\n", 273 __func__, pfl->cmd, cmd); 274 #endif 275 goto reset_flash; 276 } 277 DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d %d\n", __func__, 278 offset, value, width, pfl->wcycle); 279 offset &= pfl->chip_len - 1; 280 281 DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d\n", __func__, 282 offset, value, width); 283 boff = offset & (pfl->sector_len - 1); 284 if (pfl->width == 2) 285 boff = boff >> 1; 286 else if (pfl->width == 4) 287 boff = boff >> 2; 288 switch (pfl->wcycle) { 289 case 0: 290 /* Set the device in I/O access mode if required */ 291 if (pfl->rom_mode) 292 pflash_register_memory(pfl, 0); 293 pfl->read_counter = 0; 294 /* We're in read mode */ 295 check_unlock0: 296 if (boff == 0x55 && cmd == 0x98) { 297 enter_CFI_mode: 298 /* Enter CFI query mode */ 299 pfl->wcycle = 7; 300 pfl->cmd = 0x98; 301 return; 302 } 303 if (boff != pfl->unlock_addr0 || cmd != 0xAA) { 304 DPRINTF("%s: unlock0 failed " TARGET_FMT_plx " %02x %04x\n", 305 __func__, boff, cmd, pfl->unlock_addr0); 306 goto reset_flash; 307 } 308 DPRINTF("%s: unlock sequence started\n", __func__); 309 break; 310 case 1: 311 /* We started an unlock sequence */ 312 check_unlock1: 313 if (boff != pfl->unlock_addr1 || cmd != 0x55) { 314 DPRINTF("%s: unlock1 failed " TARGET_FMT_plx " %02x\n", __func__, 315 boff, cmd); 316 goto reset_flash; 317 } 318 DPRINTF("%s: unlock sequence done\n", __func__); 319 break; 320 case 2: 321 /* We finished an unlock sequence */ 322 if (!pfl->bypass && boff != pfl->unlock_addr0) { 323 DPRINTF("%s: command failed " TARGET_FMT_plx " %02x\n", __func__, 324 boff, cmd); 325 goto reset_flash; 326 } 327 switch (cmd) { 328 case 0x20: 329 pfl->bypass = 1; 330 goto do_bypass; 331 case 0x80: 332 case 0x90: 333 case 0xA0: 334 pfl->cmd = cmd; 335 DPRINTF("%s: starting command %02x\n", __func__, cmd); 336 break; 337 default: 338 DPRINTF("%s: unknown command %02x\n", __func__, cmd); 339 goto reset_flash; 340 } 341 break; 342 case 3: 343 switch (pfl->cmd) { 344 case 0x80: 345 /* We need another unlock sequence */ 346 goto check_unlock0; 347 case 0xA0: 348 DPRINTF("%s: write data offset " TARGET_FMT_plx " %08x %d\n", 349 __func__, offset, value, width); 350 p = pfl->storage; 351 if (!pfl->ro) { 352 switch (width) { 353 case 1: 354 p[offset] &= value; 355 pflash_update(pfl, offset, 1); 356 break; 357 case 2: 358 if (be) { 359 p[offset] &= value >> 8; 360 p[offset + 1] &= value; 361 } else { 362 p[offset] &= value; 363 p[offset + 1] &= value >> 8; 364 } 365 pflash_update(pfl, offset, 2); 366 break; 367 case 4: 368 if (be) { 369 p[offset] &= value >> 24; 370 p[offset + 1] &= value >> 16; 371 p[offset + 2] &= value >> 8; 372 p[offset + 3] &= value; 373 } else { 374 p[offset] &= value; 375 p[offset + 1] &= value >> 8; 376 p[offset + 2] &= value >> 16; 377 p[offset + 3] &= value >> 24; 378 } 379 pflash_update(pfl, offset, 4); 380 break; 381 } 382 } 383 pfl->status = 0x00 | ~(value & 0x80); 384 /* Let's pretend write is immediate */ 385 if (pfl->bypass) 386 goto do_bypass; 387 goto reset_flash; 388 case 0x90: 389 if (pfl->bypass && cmd == 0x00) { 390 /* Unlock bypass reset */ 391 goto reset_flash; 392 } 393 /* We can enter CFI query mode from autoselect mode */ 394 if (boff == 0x55 && cmd == 0x98) 395 goto enter_CFI_mode; 396 /* No break here */ 397 default: 398 DPRINTF("%s: invalid write for command %02x\n", 399 __func__, pfl->cmd); 400 goto reset_flash; 401 } 402 case 4: 403 switch (pfl->cmd) { 404 case 0xA0: 405 /* Ignore writes while flash data write is occurring */ 406 /* As we suppose write is immediate, this should never happen */ 407 return; 408 case 0x80: 409 goto check_unlock1; 410 default: 411 /* Should never happen */ 412 DPRINTF("%s: invalid command state %02x (wc 4)\n", 413 __func__, pfl->cmd); 414 goto reset_flash; 415 } 416 break; 417 case 5: 418 switch (cmd) { 419 case 0x10: 420 if (boff != pfl->unlock_addr0) { 421 DPRINTF("%s: chip erase: invalid address " TARGET_FMT_plx "\n", 422 __func__, offset); 423 goto reset_flash; 424 } 425 /* Chip erase */ 426 DPRINTF("%s: start chip erase\n", __func__); 427 if (!pfl->ro) { 428 memset(pfl->storage, 0xFF, pfl->chip_len); 429 pflash_update(pfl, 0, pfl->chip_len); 430 } 431 pfl->status = 0x00; 432 /* Let's wait 5 seconds before chip erase is done */ 433 timer_mod(pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 434 (NANOSECONDS_PER_SECOND * 5)); 435 break; 436 case 0x30: 437 /* Sector erase */ 438 p = pfl->storage; 439 offset &= ~(pfl->sector_len - 1); 440 DPRINTF("%s: start sector erase at " TARGET_FMT_plx "\n", __func__, 441 offset); 442 if (!pfl->ro) { 443 memset(p + offset, 0xFF, pfl->sector_len); 444 pflash_update(pfl, offset, pfl->sector_len); 445 } 446 pfl->status = 0x00; 447 /* Let's wait 1/2 second before sector erase is done */ 448 timer_mod(pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 449 (NANOSECONDS_PER_SECOND / 2)); 450 break; 451 default: 452 DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd); 453 goto reset_flash; 454 } 455 pfl->cmd = cmd; 456 break; 457 case 6: 458 switch (pfl->cmd) { 459 case 0x10: 460 /* Ignore writes during chip erase */ 461 return; 462 case 0x30: 463 /* Ignore writes during sector erase */ 464 return; 465 default: 466 /* Should never happen */ 467 DPRINTF("%s: invalid command state %02x (wc 6)\n", 468 __func__, pfl->cmd); 469 goto reset_flash; 470 } 471 break; 472 case 7: /* Special value for CFI queries */ 473 DPRINTF("%s: invalid write in CFI query mode\n", __func__); 474 goto reset_flash; 475 default: 476 /* Should never happen */ 477 DPRINTF("%s: invalid write state (wc 7)\n", __func__); 478 goto reset_flash; 479 } 480 pfl->wcycle++; 481 482 return; 483 484 /* Reset flash */ 485 reset_flash: 486 pfl->bypass = 0; 487 pfl->wcycle = 0; 488 pfl->cmd = 0; 489 return; 490 491 do_bypass: 492 pfl->wcycle = 2; 493 pfl->cmd = 0; 494 } 495 496 static uint64_t pflash_be_readfn(void *opaque, hwaddr addr, unsigned size) 497 { 498 return pflash_read(opaque, addr, size, 1); 499 } 500 501 static void pflash_be_writefn(void *opaque, hwaddr addr, 502 uint64_t value, unsigned size) 503 { 504 pflash_write(opaque, addr, value, size, 1); 505 } 506 507 static uint64_t pflash_le_readfn(void *opaque, hwaddr addr, unsigned size) 508 { 509 return pflash_read(opaque, addr, size, 0); 510 } 511 512 static void pflash_le_writefn(void *opaque, hwaddr addr, 513 uint64_t value, unsigned size) 514 { 515 pflash_write(opaque, addr, value, size, 0); 516 } 517 518 static const MemoryRegionOps pflash_cfi02_ops_be = { 519 .read = pflash_be_readfn, 520 .write = pflash_be_writefn, 521 .valid.min_access_size = 1, 522 .valid.max_access_size = 4, 523 .endianness = DEVICE_NATIVE_ENDIAN, 524 }; 525 526 static const MemoryRegionOps pflash_cfi02_ops_le = { 527 .read = pflash_le_readfn, 528 .write = pflash_le_writefn, 529 .valid.min_access_size = 1, 530 .valid.max_access_size = 4, 531 .endianness = DEVICE_NATIVE_ENDIAN, 532 }; 533 534 static void pflash_cfi02_realize(DeviceState *dev, Error **errp) 535 { 536 pflash_t *pfl = CFI_PFLASH02(dev); 537 uint32_t chip_len; 538 int ret; 539 Error *local_err = NULL; 540 541 if (pfl->sector_len == 0) { 542 error_setg(errp, "attribute \"sector-length\" not specified or zero."); 543 return; 544 } 545 if (pfl->nb_blocs == 0) { 546 error_setg(errp, "attribute \"num-blocks\" not specified or zero."); 547 return; 548 } 549 if (pfl->name == NULL) { 550 error_setg(errp, "attribute \"name\" not specified."); 551 return; 552 } 553 554 chip_len = pfl->sector_len * pfl->nb_blocs; 555 /* XXX: to be fixed */ 556 #if 0 557 if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) && 558 total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024)) 559 return NULL; 560 #endif 561 562 memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), pfl->be ? 563 &pflash_cfi02_ops_be : &pflash_cfi02_ops_le, 564 pfl, pfl->name, chip_len, &local_err); 565 if (local_err) { 566 error_propagate(errp, local_err); 567 return; 568 } 569 570 pfl->storage = memory_region_get_ram_ptr(&pfl->orig_mem); 571 pfl->chip_len = chip_len; 572 573 if (pfl->blk) { 574 uint64_t perm; 575 pfl->ro = blk_is_read_only(pfl->blk); 576 perm = BLK_PERM_CONSISTENT_READ | (pfl->ro ? 0 : BLK_PERM_WRITE); 577 ret = blk_set_perm(pfl->blk, perm, BLK_PERM_ALL, errp); 578 if (ret < 0) { 579 return; 580 } 581 } else { 582 pfl->ro = 0; 583 } 584 585 if (pfl->blk) { 586 /* read the initial flash content */ 587 ret = blk_pread(pfl->blk, 0, pfl->storage, chip_len); 588 if (ret < 0) { 589 vmstate_unregister_ram(&pfl->orig_mem, DEVICE(pfl)); 590 error_setg(errp, "failed to read the initial flash content"); 591 return; 592 } 593 } 594 595 pflash_setup_mappings(pfl); 596 pfl->rom_mode = 1; 597 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem); 598 599 pfl->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, pflash_timer, pfl); 600 pfl->wcycle = 0; 601 pfl->cmd = 0; 602 pfl->status = 0; 603 /* Hardcoded CFI table (mostly from SG29 Spansion flash) */ 604 /* Standard "QRY" string */ 605 pfl->cfi_table[0x10] = 'Q'; 606 pfl->cfi_table[0x11] = 'R'; 607 pfl->cfi_table[0x12] = 'Y'; 608 /* Command set (AMD/Fujitsu) */ 609 pfl->cfi_table[0x13] = 0x02; 610 pfl->cfi_table[0x14] = 0x00; 611 /* Primary extended table address */ 612 pfl->cfi_table[0x15] = 0x31; 613 pfl->cfi_table[0x16] = 0x00; 614 /* Alternate command set (none) */ 615 pfl->cfi_table[0x17] = 0x00; 616 pfl->cfi_table[0x18] = 0x00; 617 /* Alternate extended table (none) */ 618 pfl->cfi_table[0x19] = 0x00; 619 pfl->cfi_table[0x1A] = 0x00; 620 /* Vcc min */ 621 pfl->cfi_table[0x1B] = 0x27; 622 /* Vcc max */ 623 pfl->cfi_table[0x1C] = 0x36; 624 /* Vpp min (no Vpp pin) */ 625 pfl->cfi_table[0x1D] = 0x00; 626 /* Vpp max (no Vpp pin) */ 627 pfl->cfi_table[0x1E] = 0x00; 628 /* Reserved */ 629 pfl->cfi_table[0x1F] = 0x07; 630 /* Timeout for min size buffer write (NA) */ 631 pfl->cfi_table[0x20] = 0x00; 632 /* Typical timeout for block erase (512 ms) */ 633 pfl->cfi_table[0x21] = 0x09; 634 /* Typical timeout for full chip erase (4096 ms) */ 635 pfl->cfi_table[0x22] = 0x0C; 636 /* Reserved */ 637 pfl->cfi_table[0x23] = 0x01; 638 /* Max timeout for buffer write (NA) */ 639 pfl->cfi_table[0x24] = 0x00; 640 /* Max timeout for block erase */ 641 pfl->cfi_table[0x25] = 0x0A; 642 /* Max timeout for chip erase */ 643 pfl->cfi_table[0x26] = 0x0D; 644 /* Device size */ 645 pfl->cfi_table[0x27] = ctz32(chip_len); 646 /* Flash device interface (8 & 16 bits) */ 647 pfl->cfi_table[0x28] = 0x02; 648 pfl->cfi_table[0x29] = 0x00; 649 /* Max number of bytes in multi-bytes write */ 650 /* XXX: disable buffered write as it's not supported */ 651 // pfl->cfi_table[0x2A] = 0x05; 652 pfl->cfi_table[0x2A] = 0x00; 653 pfl->cfi_table[0x2B] = 0x00; 654 /* Number of erase block regions (uniform) */ 655 pfl->cfi_table[0x2C] = 0x01; 656 /* Erase block region 1 */ 657 pfl->cfi_table[0x2D] = pfl->nb_blocs - 1; 658 pfl->cfi_table[0x2E] = (pfl->nb_blocs - 1) >> 8; 659 pfl->cfi_table[0x2F] = pfl->sector_len >> 8; 660 pfl->cfi_table[0x30] = pfl->sector_len >> 16; 661 662 /* Extended */ 663 pfl->cfi_table[0x31] = 'P'; 664 pfl->cfi_table[0x32] = 'R'; 665 pfl->cfi_table[0x33] = 'I'; 666 667 pfl->cfi_table[0x34] = '1'; 668 pfl->cfi_table[0x35] = '0'; 669 670 pfl->cfi_table[0x36] = 0x00; 671 pfl->cfi_table[0x37] = 0x00; 672 pfl->cfi_table[0x38] = 0x00; 673 pfl->cfi_table[0x39] = 0x00; 674 675 pfl->cfi_table[0x3a] = 0x00; 676 677 pfl->cfi_table[0x3b] = 0x00; 678 pfl->cfi_table[0x3c] = 0x00; 679 } 680 681 static Property pflash_cfi02_properties[] = { 682 DEFINE_PROP_DRIVE("drive", struct pflash_t, blk), 683 DEFINE_PROP_UINT32("num-blocks", struct pflash_t, nb_blocs, 0), 684 DEFINE_PROP_UINT32("sector-length", struct pflash_t, sector_len, 0), 685 DEFINE_PROP_UINT8("width", struct pflash_t, width, 0), 686 DEFINE_PROP_UINT8("mappings", struct pflash_t, mappings, 0), 687 DEFINE_PROP_UINT8("big-endian", struct pflash_t, be, 0), 688 DEFINE_PROP_UINT16("id0", struct pflash_t, ident0, 0), 689 DEFINE_PROP_UINT16("id1", struct pflash_t, ident1, 0), 690 DEFINE_PROP_UINT16("id2", struct pflash_t, ident2, 0), 691 DEFINE_PROP_UINT16("id3", struct pflash_t, ident3, 0), 692 DEFINE_PROP_UINT16("unlock-addr0", struct pflash_t, unlock_addr0, 0), 693 DEFINE_PROP_UINT16("unlock-addr1", struct pflash_t, unlock_addr1, 0), 694 DEFINE_PROP_STRING("name", struct pflash_t, name), 695 DEFINE_PROP_END_OF_LIST(), 696 }; 697 698 static void pflash_cfi02_class_init(ObjectClass *klass, void *data) 699 { 700 DeviceClass *dc = DEVICE_CLASS(klass); 701 702 dc->realize = pflash_cfi02_realize; 703 dc->props = pflash_cfi02_properties; 704 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 705 } 706 707 static const TypeInfo pflash_cfi02_info = { 708 .name = TYPE_CFI_PFLASH02, 709 .parent = TYPE_SYS_BUS_DEVICE, 710 .instance_size = sizeof(struct pflash_t), 711 .class_init = pflash_cfi02_class_init, 712 }; 713 714 static void pflash_cfi02_register_types(void) 715 { 716 type_register_static(&pflash_cfi02_info); 717 } 718 719 type_init(pflash_cfi02_register_types) 720 721 pflash_t *pflash_cfi02_register(hwaddr base, 722 DeviceState *qdev, const char *name, 723 hwaddr size, 724 BlockBackend *blk, uint32_t sector_len, 725 int nb_blocs, int nb_mappings, int width, 726 uint16_t id0, uint16_t id1, 727 uint16_t id2, uint16_t id3, 728 uint16_t unlock_addr0, uint16_t unlock_addr1, 729 int be) 730 { 731 DeviceState *dev = qdev_create(NULL, TYPE_CFI_PFLASH02); 732 733 if (blk) { 734 qdev_prop_set_drive(dev, "drive", blk, &error_abort); 735 } 736 qdev_prop_set_uint32(dev, "num-blocks", nb_blocs); 737 qdev_prop_set_uint32(dev, "sector-length", sector_len); 738 qdev_prop_set_uint8(dev, "width", width); 739 qdev_prop_set_uint8(dev, "mappings", nb_mappings); 740 qdev_prop_set_uint8(dev, "big-endian", !!be); 741 qdev_prop_set_uint16(dev, "id0", id0); 742 qdev_prop_set_uint16(dev, "id1", id1); 743 qdev_prop_set_uint16(dev, "id2", id2); 744 qdev_prop_set_uint16(dev, "id3", id3); 745 qdev_prop_set_uint16(dev, "unlock-addr0", unlock_addr0); 746 qdev_prop_set_uint16(dev, "unlock-addr1", unlock_addr1); 747 qdev_prop_set_string(dev, "name", name); 748 qdev_init_nofail(dev); 749 750 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 751 return CFI_PFLASH02(dev); 752 } 753