1 /* 2 * CFI parallel flash with Intel command set emulation 3 * 4 * Copyright (c) 2006 Thorsten Zitterell 5 * Copyright (c) 2005 Jocelyn Mayer 6 * 7 * This library is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU Lesser General Public 9 * License as published by the Free Software Foundation; either 10 * version 2 of the License, or (at your option) any later version. 11 * 12 * This library is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * Lesser General Public License for more details. 16 * 17 * You should have received a copy of the GNU Lesser General Public 18 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 /* 22 * For now, this code can emulate flashes of 1, 2 or 4 bytes width. 23 * Supported commands/modes are: 24 * - flash read 25 * - flash write 26 * - flash ID read 27 * - sector erase 28 * - CFI queries 29 * 30 * It does not support timings 31 * It does not support flash interleaving 32 * It does not implement software data protection as found in many real chips 33 * It does not implement erase suspend/resume commands 34 * It does not implement multiple sectors erase 35 * 36 * It does not implement much more ... 37 */ 38 39 #include "qemu/osdep.h" 40 #include "hw/block/block.h" 41 #include "hw/block/flash.h" 42 #include "hw/qdev-properties.h" 43 #include "sysemu/block-backend.h" 44 #include "qapi/error.h" 45 #include "qemu/error-report.h" 46 #include "qemu/bitops.h" 47 #include "qemu/error-report.h" 48 #include "qemu/host-utils.h" 49 #include "qemu/log.h" 50 #include "qemu/module.h" 51 #include "qemu/option.h" 52 #include "hw/sysbus.h" 53 #include "migration/vmstate.h" 54 #include "sysemu/blockdev.h" 55 #include "sysemu/runstate.h" 56 #include "trace.h" 57 58 /* #define PFLASH_DEBUG */ 59 #ifdef PFLASH_DEBUG 60 #define DPRINTF(fmt, ...) \ 61 do { \ 62 fprintf(stderr, "PFLASH: " fmt , ## __VA_ARGS__); \ 63 } while (0) 64 #else 65 #define DPRINTF(fmt, ...) do { } while (0) 66 #endif 67 68 #define PFLASH_BE 0 69 #define PFLASH_SECURE 1 70 71 struct PFlashCFI01 { 72 /*< private >*/ 73 SysBusDevice parent_obj; 74 /*< public >*/ 75 76 BlockBackend *blk; 77 uint32_t nb_blocs; 78 uint64_t sector_len; 79 uint8_t bank_width; 80 uint8_t device_width; /* If 0, device width not specified. */ 81 uint8_t max_device_width; /* max device width in bytes */ 82 uint32_t features; 83 uint8_t wcycle; /* if 0, the flash is read normally */ 84 int ro; 85 uint8_t cmd; 86 uint8_t status; 87 uint16_t ident0; 88 uint16_t ident1; 89 uint16_t ident2; 90 uint16_t ident3; 91 uint8_t cfi_table[0x52]; 92 uint64_t counter; 93 unsigned int writeblock_size; 94 MemoryRegion mem; 95 char *name; 96 void *storage; 97 VMChangeStateEntry *vmstate; 98 bool old_multiple_chip_handling; 99 }; 100 101 static int pflash_post_load(void *opaque, int version_id); 102 103 static const VMStateDescription vmstate_pflash = { 104 .name = "pflash_cfi01", 105 .version_id = 1, 106 .minimum_version_id = 1, 107 .post_load = pflash_post_load, 108 .fields = (VMStateField[]) { 109 VMSTATE_UINT8(wcycle, PFlashCFI01), 110 VMSTATE_UINT8(cmd, PFlashCFI01), 111 VMSTATE_UINT8(status, PFlashCFI01), 112 VMSTATE_UINT64(counter, PFlashCFI01), 113 VMSTATE_END_OF_LIST() 114 } 115 }; 116 117 /* Perform a CFI query based on the bank width of the flash. 118 * If this code is called we know we have a device_width set for 119 * this flash. 120 */ 121 static uint32_t pflash_cfi_query(PFlashCFI01 *pfl, hwaddr offset) 122 { 123 int i; 124 uint32_t resp = 0; 125 hwaddr boff; 126 127 /* Adjust incoming offset to match expected device-width 128 * addressing. CFI query addresses are always specified in terms of 129 * the maximum supported width of the device. This means that x8 130 * devices and x8/x16 devices in x8 mode behave differently. For 131 * devices that are not used at their max width, we will be 132 * provided with addresses that use higher address bits than 133 * expected (based on the max width), so we will shift them lower 134 * so that they will match the addresses used when 135 * device_width==max_device_width. 136 */ 137 boff = offset >> (ctz32(pfl->bank_width) + 138 ctz32(pfl->max_device_width) - ctz32(pfl->device_width)); 139 140 if (boff >= sizeof(pfl->cfi_table)) { 141 return 0; 142 } 143 /* Now we will construct the CFI response generated by a single 144 * device, then replicate that for all devices that make up the 145 * bus. For wide parts used in x8 mode, CFI query responses 146 * are different than native byte-wide parts. 147 */ 148 resp = pfl->cfi_table[boff]; 149 if (pfl->device_width != pfl->max_device_width) { 150 /* The only case currently supported is x8 mode for a 151 * wider part. 152 */ 153 if (pfl->device_width != 1 || pfl->bank_width > 4) { 154 DPRINTF("%s: Unsupported device configuration: " 155 "device_width=%d, max_device_width=%d\n", 156 __func__, pfl->device_width, 157 pfl->max_device_width); 158 return 0; 159 } 160 /* CFI query data is repeated, rather than zero padded for 161 * wide devices used in x8 mode. 162 */ 163 for (i = 1; i < pfl->max_device_width; i++) { 164 resp = deposit32(resp, 8 * i, 8, pfl->cfi_table[boff]); 165 } 166 } 167 /* Replicate responses for each device in bank. */ 168 if (pfl->device_width < pfl->bank_width) { 169 for (i = pfl->device_width; 170 i < pfl->bank_width; i += pfl->device_width) { 171 resp = deposit32(resp, 8 * i, 8 * pfl->device_width, resp); 172 } 173 } 174 175 return resp; 176 } 177 178 179 180 /* Perform a device id query based on the bank width of the flash. */ 181 static uint32_t pflash_devid_query(PFlashCFI01 *pfl, hwaddr offset) 182 { 183 int i; 184 uint32_t resp; 185 hwaddr boff; 186 187 /* Adjust incoming offset to match expected device-width 188 * addressing. Device ID read addresses are always specified in 189 * terms of the maximum supported width of the device. This means 190 * that x8 devices and x8/x16 devices in x8 mode behave 191 * differently. For devices that are not used at their max width, 192 * we will be provided with addresses that use higher address bits 193 * than expected (based on the max width), so we will shift them 194 * lower so that they will match the addresses used when 195 * device_width==max_device_width. 196 */ 197 boff = offset >> (ctz32(pfl->bank_width) + 198 ctz32(pfl->max_device_width) - ctz32(pfl->device_width)); 199 200 /* Mask off upper bits which may be used in to query block 201 * or sector lock status at other addresses. 202 * Offsets 2/3 are block lock status, is not emulated. 203 */ 204 switch (boff & 0xFF) { 205 case 0: 206 resp = pfl->ident0; 207 trace_pflash_manufacturer_id(resp); 208 break; 209 case 1: 210 resp = pfl->ident1; 211 trace_pflash_device_id(resp); 212 break; 213 default: 214 trace_pflash_device_info(offset); 215 return 0; 216 break; 217 } 218 /* Replicate responses for each device in bank. */ 219 if (pfl->device_width < pfl->bank_width) { 220 for (i = pfl->device_width; 221 i < pfl->bank_width; i += pfl->device_width) { 222 resp = deposit32(resp, 8 * i, 8 * pfl->device_width, resp); 223 } 224 } 225 226 return resp; 227 } 228 229 static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset, 230 int width, int be) 231 { 232 uint8_t *p; 233 uint32_t ret; 234 235 p = pfl->storage; 236 switch (width) { 237 case 1: 238 ret = p[offset]; 239 break; 240 case 2: 241 if (be) { 242 ret = p[offset] << 8; 243 ret |= p[offset + 1]; 244 } else { 245 ret = p[offset]; 246 ret |= p[offset + 1] << 8; 247 } 248 break; 249 case 4: 250 if (be) { 251 ret = p[offset] << 24; 252 ret |= p[offset + 1] << 16; 253 ret |= p[offset + 2] << 8; 254 ret |= p[offset + 3]; 255 } else { 256 ret = p[offset]; 257 ret |= p[offset + 1] << 8; 258 ret |= p[offset + 2] << 16; 259 ret |= p[offset + 3] << 24; 260 } 261 break; 262 default: 263 DPRINTF("BUG in %s\n", __func__); 264 abort(); 265 } 266 trace_pflash_data_read(offset, width, ret); 267 return ret; 268 } 269 270 static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset, 271 int width, int be) 272 { 273 hwaddr boff; 274 uint32_t ret; 275 276 ret = -1; 277 switch (pfl->cmd) { 278 default: 279 /* This should never happen : reset state & treat it as a read */ 280 DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd); 281 pfl->wcycle = 0; 282 /* 283 * The command 0x00 is not assigned by the CFI open standard, 284 * but QEMU historically uses it for the READ_ARRAY command (0xff). 285 */ 286 pfl->cmd = 0x00; 287 /* fall through to read code */ 288 case 0x00: /* This model reset value for READ_ARRAY (not CFI compliant) */ 289 /* Flash area read */ 290 ret = pflash_data_read(pfl, offset, width, be); 291 break; 292 case 0x10: /* Single byte program */ 293 case 0x20: /* Block erase */ 294 case 0x28: /* Block erase */ 295 case 0x40: /* single byte program */ 296 case 0x50: /* Clear status register */ 297 case 0x60: /* Block /un)lock */ 298 case 0x70: /* Status Register */ 299 case 0xe8: /* Write block */ 300 /* Status register read. Return status from each device in 301 * bank. 302 */ 303 ret = pfl->status; 304 if (pfl->device_width && width > pfl->device_width) { 305 int shift = pfl->device_width * 8; 306 while (shift + pfl->device_width * 8 <= width * 8) { 307 ret |= pfl->status << shift; 308 shift += pfl->device_width * 8; 309 } 310 } else if (!pfl->device_width && width > 2) { 311 /* Handle 32 bit flash cases where device width is not 312 * set. (Existing behavior before device width added.) 313 */ 314 ret |= pfl->status << 16; 315 } 316 DPRINTF("%s: status %x\n", __func__, ret); 317 break; 318 case 0x90: 319 if (!pfl->device_width) { 320 /* Preserve old behavior if device width not specified */ 321 boff = offset & 0xFF; 322 if (pfl->bank_width == 2) { 323 boff = boff >> 1; 324 } else if (pfl->bank_width == 4) { 325 boff = boff >> 2; 326 } 327 328 switch (boff) { 329 case 0: 330 ret = pfl->ident0 << 8 | pfl->ident1; 331 trace_pflash_manufacturer_id(ret); 332 break; 333 case 1: 334 ret = pfl->ident2 << 8 | pfl->ident3; 335 trace_pflash_device_id(ret); 336 break; 337 default: 338 trace_pflash_device_info(boff); 339 ret = 0; 340 break; 341 } 342 } else { 343 /* If we have a read larger than the bank_width, combine multiple 344 * manufacturer/device ID queries into a single response. 345 */ 346 int i; 347 for (i = 0; i < width; i += pfl->bank_width) { 348 ret = deposit32(ret, i * 8, pfl->bank_width * 8, 349 pflash_devid_query(pfl, 350 offset + i * pfl->bank_width)); 351 } 352 } 353 break; 354 case 0x98: /* Query mode */ 355 if (!pfl->device_width) { 356 /* Preserve old behavior if device width not specified */ 357 boff = offset & 0xFF; 358 if (pfl->bank_width == 2) { 359 boff = boff >> 1; 360 } else if (pfl->bank_width == 4) { 361 boff = boff >> 2; 362 } 363 364 if (boff < sizeof(pfl->cfi_table)) { 365 ret = pfl->cfi_table[boff]; 366 } else { 367 ret = 0; 368 } 369 } else { 370 /* If we have a read larger than the bank_width, combine multiple 371 * CFI queries into a single response. 372 */ 373 int i; 374 for (i = 0; i < width; i += pfl->bank_width) { 375 ret = deposit32(ret, i * 8, pfl->bank_width * 8, 376 pflash_cfi_query(pfl, 377 offset + i * pfl->bank_width)); 378 } 379 } 380 381 break; 382 } 383 trace_pflash_io_read(offset, width, ret, pfl->cmd, pfl->wcycle); 384 385 return ret; 386 } 387 388 /* update flash content on disk */ 389 static void pflash_update(PFlashCFI01 *pfl, int offset, 390 int size) 391 { 392 int offset_end; 393 int ret; 394 if (pfl->blk) { 395 offset_end = offset + size; 396 /* widen to sector boundaries */ 397 offset = QEMU_ALIGN_DOWN(offset, BDRV_SECTOR_SIZE); 398 offset_end = QEMU_ALIGN_UP(offset_end, BDRV_SECTOR_SIZE); 399 ret = blk_pwrite(pfl->blk, offset, pfl->storage + offset, 400 offset_end - offset, 0); 401 if (ret < 0) { 402 /* TODO set error bit in status */ 403 error_report("Could not update PFLASH: %s", strerror(-ret)); 404 } 405 } 406 } 407 408 static inline void pflash_data_write(PFlashCFI01 *pfl, hwaddr offset, 409 uint32_t value, int width, int be) 410 { 411 uint8_t *p = pfl->storage; 412 413 trace_pflash_data_write(offset, width, value, pfl->counter); 414 switch (width) { 415 case 1: 416 p[offset] = value; 417 break; 418 case 2: 419 if (be) { 420 p[offset] = value >> 8; 421 p[offset + 1] = value; 422 } else { 423 p[offset] = value; 424 p[offset + 1] = value >> 8; 425 } 426 break; 427 case 4: 428 if (be) { 429 p[offset] = value >> 24; 430 p[offset + 1] = value >> 16; 431 p[offset + 2] = value >> 8; 432 p[offset + 3] = value; 433 } else { 434 p[offset] = value; 435 p[offset + 1] = value >> 8; 436 p[offset + 2] = value >> 16; 437 p[offset + 3] = value >> 24; 438 } 439 break; 440 } 441 442 } 443 444 static void pflash_write(PFlashCFI01 *pfl, hwaddr offset, 445 uint32_t value, int width, int be) 446 { 447 uint8_t *p; 448 uint8_t cmd; 449 450 cmd = value; 451 452 trace_pflash_io_write(offset, width, value, pfl->wcycle); 453 if (!pfl->wcycle) { 454 /* Set the device in I/O access mode */ 455 memory_region_rom_device_set_romd(&pfl->mem, false); 456 } 457 458 switch (pfl->wcycle) { 459 case 0: 460 /* read mode */ 461 switch (cmd) { 462 case 0x00: /* This model reset value for READ_ARRAY (not CFI) */ 463 goto mode_read_array; 464 case 0x10: /* Single Byte Program */ 465 case 0x40: /* Single Byte Program */ 466 DPRINTF("%s: Single Byte Program\n", __func__); 467 break; 468 case 0x20: /* Block erase */ 469 p = pfl->storage; 470 offset &= ~(pfl->sector_len - 1); 471 472 DPRINTF("%s: block erase at " TARGET_FMT_plx " bytes %x\n", 473 __func__, offset, (unsigned)pfl->sector_len); 474 475 if (!pfl->ro) { 476 memset(p + offset, 0xff, pfl->sector_len); 477 pflash_update(pfl, offset, pfl->sector_len); 478 } else { 479 pfl->status |= 0x20; /* Block erase error */ 480 } 481 pfl->status |= 0x80; /* Ready! */ 482 break; 483 case 0x50: /* Clear status bits */ 484 DPRINTF("%s: Clear status bits\n", __func__); 485 pfl->status = 0x0; 486 goto mode_read_array; 487 case 0x60: /* Block (un)lock */ 488 DPRINTF("%s: Block unlock\n", __func__); 489 break; 490 case 0x70: /* Status Register */ 491 DPRINTF("%s: Read status register\n", __func__); 492 pfl->cmd = cmd; 493 return; 494 case 0x90: /* Read Device ID */ 495 DPRINTF("%s: Read Device information\n", __func__); 496 pfl->cmd = cmd; 497 return; 498 case 0x98: /* CFI query */ 499 DPRINTF("%s: CFI query\n", __func__); 500 break; 501 case 0xe8: /* Write to buffer */ 502 DPRINTF("%s: Write to buffer\n", __func__); 503 /* FIXME should save @offset, @width for case 1+ */ 504 qemu_log_mask(LOG_UNIMP, 505 "%s: Write to buffer emulation is flawed\n", 506 __func__); 507 pfl->status |= 0x80; /* Ready! */ 508 break; 509 case 0xf0: /* Probe for AMD flash */ 510 DPRINTF("%s: Probe for AMD flash\n", __func__); 511 goto mode_read_array; 512 case 0xff: /* Read Array */ 513 DPRINTF("%s: Read array mode\n", __func__); 514 goto mode_read_array; 515 default: 516 goto error_flash; 517 } 518 pfl->wcycle++; 519 pfl->cmd = cmd; 520 break; 521 case 1: 522 switch (pfl->cmd) { 523 case 0x10: /* Single Byte Program */ 524 case 0x40: /* Single Byte Program */ 525 DPRINTF("%s: Single Byte Program\n", __func__); 526 if (!pfl->ro) { 527 pflash_data_write(pfl, offset, value, width, be); 528 pflash_update(pfl, offset, width); 529 } else { 530 pfl->status |= 0x10; /* Programming error */ 531 } 532 pfl->status |= 0x80; /* Ready! */ 533 pfl->wcycle = 0; 534 break; 535 case 0x20: /* Block erase */ 536 case 0x28: 537 if (cmd == 0xd0) { /* confirm */ 538 pfl->wcycle = 0; 539 pfl->status |= 0x80; 540 } else if (cmd == 0xff) { /* Read Array */ 541 goto mode_read_array; 542 } else 543 goto error_flash; 544 545 break; 546 case 0xe8: 547 /* Mask writeblock size based on device width, or bank width if 548 * device width not specified. 549 */ 550 /* FIXME check @offset, @width */ 551 if (pfl->device_width) { 552 value = extract32(value, 0, pfl->device_width * 8); 553 } else { 554 value = extract32(value, 0, pfl->bank_width * 8); 555 } 556 DPRINTF("%s: block write of %x bytes\n", __func__, value); 557 pfl->counter = value; 558 pfl->wcycle++; 559 break; 560 case 0x60: 561 if (cmd == 0xd0) { 562 pfl->wcycle = 0; 563 pfl->status |= 0x80; 564 } else if (cmd == 0x01) { 565 pfl->wcycle = 0; 566 pfl->status |= 0x80; 567 } else if (cmd == 0xff) { /* Read Array */ 568 goto mode_read_array; 569 } else { 570 DPRINTF("%s: Unknown (un)locking command\n", __func__); 571 goto mode_read_array; 572 } 573 break; 574 case 0x98: 575 if (cmd == 0xff) { /* Read Array */ 576 goto mode_read_array; 577 } else { 578 DPRINTF("%s: leaving query mode\n", __func__); 579 } 580 break; 581 default: 582 goto error_flash; 583 } 584 break; 585 case 2: 586 switch (pfl->cmd) { 587 case 0xe8: /* Block write */ 588 /* FIXME check @offset, @width */ 589 if (!pfl->ro) { 590 /* 591 * FIXME writing straight to memory is *wrong*. We 592 * should write to a buffer, and flush it to memory 593 * only on confirm command (see below). 594 */ 595 pflash_data_write(pfl, offset, value, width, be); 596 } else { 597 pfl->status |= 0x10; /* Programming error */ 598 } 599 600 pfl->status |= 0x80; 601 602 if (!pfl->counter) { 603 hwaddr mask = pfl->writeblock_size - 1; 604 mask = ~mask; 605 606 DPRINTF("%s: block write finished\n", __func__); 607 pfl->wcycle++; 608 if (!pfl->ro) { 609 /* Flush the entire write buffer onto backing storage. */ 610 /* FIXME premature! */ 611 pflash_update(pfl, offset & mask, pfl->writeblock_size); 612 } else { 613 pfl->status |= 0x10; /* Programming error */ 614 } 615 } 616 617 pfl->counter--; 618 break; 619 default: 620 goto error_flash; 621 } 622 break; 623 case 3: /* Confirm mode */ 624 switch (pfl->cmd) { 625 case 0xe8: /* Block write */ 626 if (cmd == 0xd0) { 627 /* FIXME this is where we should write out the buffer */ 628 pfl->wcycle = 0; 629 pfl->status |= 0x80; 630 } else { 631 qemu_log_mask(LOG_UNIMP, 632 "%s: Aborting write to buffer not implemented," 633 " the data is already written to storage!\n" 634 "Flash device reset into READ mode.\n", 635 __func__); 636 goto mode_read_array; 637 } 638 break; 639 default: 640 goto error_flash; 641 } 642 break; 643 default: 644 /* Should never happen */ 645 DPRINTF("%s: invalid write state\n", __func__); 646 goto mode_read_array; 647 } 648 return; 649 650 error_flash: 651 qemu_log_mask(LOG_UNIMP, "%s: Unimplemented flash cmd sequence " 652 "(offset " TARGET_FMT_plx ", wcycle 0x%x cmd 0x%x value 0x%x)" 653 "\n", __func__, offset, pfl->wcycle, pfl->cmd, value); 654 655 mode_read_array: 656 trace_pflash_reset(); 657 memory_region_rom_device_set_romd(&pfl->mem, true); 658 pfl->wcycle = 0; 659 pfl->cmd = 0x00; /* This model reset value for READ_ARRAY (not CFI) */ 660 } 661 662 663 static MemTxResult pflash_mem_read_with_attrs(void *opaque, hwaddr addr, uint64_t *value, 664 unsigned len, MemTxAttrs attrs) 665 { 666 PFlashCFI01 *pfl = opaque; 667 bool be = !!(pfl->features & (1 << PFLASH_BE)); 668 669 if ((pfl->features & (1 << PFLASH_SECURE)) && !attrs.secure) { 670 *value = pflash_data_read(opaque, addr, len, be); 671 } else { 672 *value = pflash_read(opaque, addr, len, be); 673 } 674 return MEMTX_OK; 675 } 676 677 static MemTxResult pflash_mem_write_with_attrs(void *opaque, hwaddr addr, uint64_t value, 678 unsigned len, MemTxAttrs attrs) 679 { 680 PFlashCFI01 *pfl = opaque; 681 bool be = !!(pfl->features & (1 << PFLASH_BE)); 682 683 if ((pfl->features & (1 << PFLASH_SECURE)) && !attrs.secure) { 684 return MEMTX_ERROR; 685 } else { 686 pflash_write(opaque, addr, value, len, be); 687 return MEMTX_OK; 688 } 689 } 690 691 static const MemoryRegionOps pflash_cfi01_ops = { 692 .read_with_attrs = pflash_mem_read_with_attrs, 693 .write_with_attrs = pflash_mem_write_with_attrs, 694 .endianness = DEVICE_NATIVE_ENDIAN, 695 }; 696 697 static void pflash_cfi01_realize(DeviceState *dev, Error **errp) 698 { 699 ERRP_GUARD(); 700 PFlashCFI01 *pfl = PFLASH_CFI01(dev); 701 uint64_t total_len; 702 int ret; 703 uint64_t blocks_per_device, sector_len_per_device, device_len; 704 int num_devices; 705 706 if (pfl->sector_len == 0) { 707 error_setg(errp, "attribute \"sector-length\" not specified or zero."); 708 return; 709 } 710 if (pfl->nb_blocs == 0) { 711 error_setg(errp, "attribute \"num-blocks\" not specified or zero."); 712 return; 713 } 714 if (pfl->name == NULL) { 715 error_setg(errp, "attribute \"name\" not specified."); 716 return; 717 } 718 719 total_len = pfl->sector_len * pfl->nb_blocs; 720 721 /* These are only used to expose the parameters of each device 722 * in the cfi_table[]. 723 */ 724 num_devices = pfl->device_width ? (pfl->bank_width / pfl->device_width) : 1; 725 if (pfl->old_multiple_chip_handling) { 726 blocks_per_device = pfl->nb_blocs / num_devices; 727 sector_len_per_device = pfl->sector_len; 728 } else { 729 blocks_per_device = pfl->nb_blocs; 730 sector_len_per_device = pfl->sector_len / num_devices; 731 } 732 device_len = sector_len_per_device * blocks_per_device; 733 734 memory_region_init_rom_device( 735 &pfl->mem, OBJECT(dev), 736 &pflash_cfi01_ops, 737 pfl, 738 pfl->name, total_len, errp); 739 if (*errp) { 740 return; 741 } 742 743 pfl->storage = memory_region_get_ram_ptr(&pfl->mem); 744 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem); 745 746 if (pfl->blk) { 747 uint64_t perm; 748 pfl->ro = blk_is_read_only(pfl->blk); 749 perm = BLK_PERM_CONSISTENT_READ | (pfl->ro ? 0 : BLK_PERM_WRITE); 750 ret = blk_set_perm(pfl->blk, perm, BLK_PERM_ALL, errp); 751 if (ret < 0) { 752 return; 753 } 754 } else { 755 pfl->ro = 0; 756 } 757 758 if (pfl->blk) { 759 if (!blk_check_size_and_read_all(pfl->blk, pfl->storage, total_len, 760 errp)) { 761 vmstate_unregister_ram(&pfl->mem, DEVICE(pfl)); 762 return; 763 } 764 } 765 766 /* Default to devices being used at their maximum device width. This was 767 * assumed before the device_width support was added. 768 */ 769 if (!pfl->max_device_width) { 770 pfl->max_device_width = pfl->device_width; 771 } 772 773 pfl->wcycle = 0; 774 /* 775 * The command 0x00 is not assigned by the CFI open standard, 776 * but QEMU historically uses it for the READ_ARRAY command (0xff). 777 */ 778 pfl->cmd = 0x00; 779 pfl->status = 0x80; /* WSM ready */ 780 /* Hardcoded CFI table */ 781 /* Standard "QRY" string */ 782 pfl->cfi_table[0x10] = 'Q'; 783 pfl->cfi_table[0x11] = 'R'; 784 pfl->cfi_table[0x12] = 'Y'; 785 /* Command set (Intel) */ 786 pfl->cfi_table[0x13] = 0x01; 787 pfl->cfi_table[0x14] = 0x00; 788 /* Primary extended table address (none) */ 789 pfl->cfi_table[0x15] = 0x31; 790 pfl->cfi_table[0x16] = 0x00; 791 /* Alternate command set (none) */ 792 pfl->cfi_table[0x17] = 0x00; 793 pfl->cfi_table[0x18] = 0x00; 794 /* Alternate extended table (none) */ 795 pfl->cfi_table[0x19] = 0x00; 796 pfl->cfi_table[0x1A] = 0x00; 797 /* Vcc min */ 798 pfl->cfi_table[0x1B] = 0x45; 799 /* Vcc max */ 800 pfl->cfi_table[0x1C] = 0x55; 801 /* Vpp min (no Vpp pin) */ 802 pfl->cfi_table[0x1D] = 0x00; 803 /* Vpp max (no Vpp pin) */ 804 pfl->cfi_table[0x1E] = 0x00; 805 /* Reserved */ 806 pfl->cfi_table[0x1F] = 0x07; 807 /* Timeout for min size buffer write */ 808 pfl->cfi_table[0x20] = 0x07; 809 /* Typical timeout for block erase */ 810 pfl->cfi_table[0x21] = 0x0a; 811 /* Typical timeout for full chip erase (4096 ms) */ 812 pfl->cfi_table[0x22] = 0x00; 813 /* Reserved */ 814 pfl->cfi_table[0x23] = 0x04; 815 /* Max timeout for buffer write */ 816 pfl->cfi_table[0x24] = 0x04; 817 /* Max timeout for block erase */ 818 pfl->cfi_table[0x25] = 0x04; 819 /* Max timeout for chip erase */ 820 pfl->cfi_table[0x26] = 0x00; 821 /* Device size */ 822 pfl->cfi_table[0x27] = ctz32(device_len); /* + 1; */ 823 /* Flash device interface (8 & 16 bits) */ 824 pfl->cfi_table[0x28] = 0x02; 825 pfl->cfi_table[0x29] = 0x00; 826 /* Max number of bytes in multi-bytes write */ 827 if (pfl->bank_width == 1) { 828 pfl->cfi_table[0x2A] = 0x08; 829 } else { 830 pfl->cfi_table[0x2A] = 0x0B; 831 } 832 pfl->writeblock_size = 1 << pfl->cfi_table[0x2A]; 833 if (!pfl->old_multiple_chip_handling && num_devices > 1) { 834 pfl->writeblock_size *= num_devices; 835 } 836 837 pfl->cfi_table[0x2B] = 0x00; 838 /* Number of erase block regions (uniform) */ 839 pfl->cfi_table[0x2C] = 0x01; 840 /* Erase block region 1 */ 841 pfl->cfi_table[0x2D] = blocks_per_device - 1; 842 pfl->cfi_table[0x2E] = (blocks_per_device - 1) >> 8; 843 pfl->cfi_table[0x2F] = sector_len_per_device >> 8; 844 pfl->cfi_table[0x30] = sector_len_per_device >> 16; 845 846 /* Extended */ 847 pfl->cfi_table[0x31] = 'P'; 848 pfl->cfi_table[0x32] = 'R'; 849 pfl->cfi_table[0x33] = 'I'; 850 851 pfl->cfi_table[0x34] = '1'; 852 pfl->cfi_table[0x35] = '0'; 853 854 pfl->cfi_table[0x36] = 0x00; 855 pfl->cfi_table[0x37] = 0x00; 856 pfl->cfi_table[0x38] = 0x00; 857 pfl->cfi_table[0x39] = 0x00; 858 859 pfl->cfi_table[0x3a] = 0x00; 860 861 pfl->cfi_table[0x3b] = 0x00; 862 pfl->cfi_table[0x3c] = 0x00; 863 864 pfl->cfi_table[0x3f] = 0x01; /* Number of protection fields */ 865 } 866 867 static void pflash_cfi01_system_reset(DeviceState *dev) 868 { 869 PFlashCFI01 *pfl = PFLASH_CFI01(dev); 870 871 /* 872 * The command 0x00 is not assigned by the CFI open standard, 873 * but QEMU historically uses it for the READ_ARRAY command (0xff). 874 */ 875 pfl->cmd = 0x00; 876 pfl->wcycle = 0; 877 memory_region_rom_device_set_romd(&pfl->mem, true); 878 /* 879 * The WSM ready timer occurs at most 150ns after system reset. 880 * This model deliberately ignores this delay. 881 */ 882 pfl->status = 0x80; 883 } 884 885 static Property pflash_cfi01_properties[] = { 886 DEFINE_PROP_DRIVE("drive", PFlashCFI01, blk), 887 /* num-blocks is the number of blocks actually visible to the guest, 888 * ie the total size of the device divided by the sector length. 889 * If we're emulating flash devices wired in parallel the actual 890 * number of blocks per indvidual device will differ. 891 */ 892 DEFINE_PROP_UINT32("num-blocks", PFlashCFI01, nb_blocs, 0), 893 DEFINE_PROP_UINT64("sector-length", PFlashCFI01, sector_len, 0), 894 /* width here is the overall width of this QEMU device in bytes. 895 * The QEMU device may be emulating a number of flash devices 896 * wired up in parallel; the width of each individual flash 897 * device should be specified via device-width. If the individual 898 * devices have a maximum width which is greater than the width 899 * they are being used for, this maximum width should be set via 900 * max-device-width (which otherwise defaults to device-width). 901 * So for instance a 32-bit wide QEMU flash device made from four 902 * 16-bit flash devices used in 8-bit wide mode would be configured 903 * with width = 4, device-width = 1, max-device-width = 2. 904 * 905 * If device-width is not specified we default to backwards 906 * compatible behaviour which is a bad emulation of two 907 * 16 bit devices making up a 32 bit wide QEMU device. This 908 * is deprecated for new uses of this device. 909 */ 910 DEFINE_PROP_UINT8("width", PFlashCFI01, bank_width, 0), 911 DEFINE_PROP_UINT8("device-width", PFlashCFI01, device_width, 0), 912 DEFINE_PROP_UINT8("max-device-width", PFlashCFI01, max_device_width, 0), 913 DEFINE_PROP_BIT("big-endian", PFlashCFI01, features, PFLASH_BE, 0), 914 DEFINE_PROP_BIT("secure", PFlashCFI01, features, PFLASH_SECURE, 0), 915 DEFINE_PROP_UINT16("id0", PFlashCFI01, ident0, 0), 916 DEFINE_PROP_UINT16("id1", PFlashCFI01, ident1, 0), 917 DEFINE_PROP_UINT16("id2", PFlashCFI01, ident2, 0), 918 DEFINE_PROP_UINT16("id3", PFlashCFI01, ident3, 0), 919 DEFINE_PROP_STRING("name", PFlashCFI01, name), 920 DEFINE_PROP_BOOL("old-multiple-chip-handling", PFlashCFI01, 921 old_multiple_chip_handling, false), 922 DEFINE_PROP_END_OF_LIST(), 923 }; 924 925 static void pflash_cfi01_class_init(ObjectClass *klass, void *data) 926 { 927 DeviceClass *dc = DEVICE_CLASS(klass); 928 929 dc->reset = pflash_cfi01_system_reset; 930 dc->realize = pflash_cfi01_realize; 931 device_class_set_props(dc, pflash_cfi01_properties); 932 dc->vmsd = &vmstate_pflash; 933 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 934 } 935 936 937 static const TypeInfo pflash_cfi01_info = { 938 .name = TYPE_PFLASH_CFI01, 939 .parent = TYPE_SYS_BUS_DEVICE, 940 .instance_size = sizeof(PFlashCFI01), 941 .class_init = pflash_cfi01_class_init, 942 }; 943 944 static void pflash_cfi01_register_types(void) 945 { 946 type_register_static(&pflash_cfi01_info); 947 } 948 949 type_init(pflash_cfi01_register_types) 950 951 PFlashCFI01 *pflash_cfi01_register(hwaddr base, 952 const char *name, 953 hwaddr size, 954 BlockBackend *blk, 955 uint32_t sector_len, 956 int bank_width, 957 uint16_t id0, uint16_t id1, 958 uint16_t id2, uint16_t id3, 959 int be) 960 { 961 DeviceState *dev = qdev_new(TYPE_PFLASH_CFI01); 962 963 if (blk) { 964 qdev_prop_set_drive(dev, "drive", blk); 965 } 966 assert(QEMU_IS_ALIGNED(size, sector_len)); 967 qdev_prop_set_uint32(dev, "num-blocks", size / sector_len); 968 qdev_prop_set_uint64(dev, "sector-length", sector_len); 969 qdev_prop_set_uint8(dev, "width", bank_width); 970 qdev_prop_set_bit(dev, "big-endian", !!be); 971 qdev_prop_set_uint16(dev, "id0", id0); 972 qdev_prop_set_uint16(dev, "id1", id1); 973 qdev_prop_set_uint16(dev, "id2", id2); 974 qdev_prop_set_uint16(dev, "id3", id3); 975 qdev_prop_set_string(dev, "name", name); 976 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 977 978 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 979 return PFLASH_CFI01(dev); 980 } 981 982 BlockBackend *pflash_cfi01_get_blk(PFlashCFI01 *fl) 983 { 984 return fl->blk; 985 } 986 987 MemoryRegion *pflash_cfi01_get_memory(PFlashCFI01 *fl) 988 { 989 return &fl->mem; 990 } 991 992 /* 993 * Handle -drive if=pflash for machines that use properties. 994 * If @dinfo is null, do nothing. 995 * Else if @fl's property "drive" is already set, fatal error. 996 * Else set it to the BlockBackend with @dinfo. 997 */ 998 void pflash_cfi01_legacy_drive(PFlashCFI01 *fl, DriveInfo *dinfo) 999 { 1000 Location loc; 1001 1002 if (!dinfo) { 1003 return; 1004 } 1005 1006 loc_push_none(&loc); 1007 qemu_opts_loc_restore(dinfo->opts); 1008 if (fl->blk) { 1009 error_report("clashes with -machine"); 1010 exit(1); 1011 } 1012 qdev_prop_set_drive_err(DEVICE(fl), "drive", blk_by_legacy_dinfo(dinfo), 1013 &error_fatal); 1014 loc_pop(&loc); 1015 } 1016 1017 static void postload_update_cb(void *opaque, int running, RunState state) 1018 { 1019 PFlashCFI01 *pfl = opaque; 1020 1021 /* This is called after bdrv_invalidate_cache_all. */ 1022 qemu_del_vm_change_state_handler(pfl->vmstate); 1023 pfl->vmstate = NULL; 1024 1025 DPRINTF("%s: updating bdrv for %s\n", __func__, pfl->name); 1026 pflash_update(pfl, 0, pfl->sector_len * pfl->nb_blocs); 1027 } 1028 1029 static int pflash_post_load(void *opaque, int version_id) 1030 { 1031 PFlashCFI01 *pfl = opaque; 1032 1033 if (!pfl->ro) { 1034 pfl->vmstate = qemu_add_vm_change_state_handler(postload_update_cb, 1035 pfl); 1036 } 1037 return 0; 1038 } 1039