xref: /openbmc/qemu/hw/block/nand.c (revision db76ec62)
1 /*
2  * Flash NAND memory emulation.  Based on "16M x 8 Bit NAND Flash
3  * Memory" datasheet for the KM29U128AT / K9F2808U0A chips from
4  * Samsung Electronic.
5  *
6  * Copyright (c) 2006 Openedhand Ltd.
7  * Written by Andrzej Zaborowski <balrog@zabor.org>
8  *
9  * Support for additional features based on "MT29F2G16ABCWP 2Gx16"
10  * datasheet from Micron Technology and "NAND02G-B2C" datasheet
11  * from ST Microelectronics.
12  *
13  * This code is licensed under the GNU GPL v2.
14  *
15  * Contributions after 2012-01-13 are licensed under the terms of the
16  * GNU GPL, version 2 or (at your option) any later version.
17  */
18 
19 #ifndef NAND_IO
20 
21 # include "hw/hw.h"
22 # include "hw/block/flash.h"
23 # include "sysemu/blockdev.h"
24 #include "hw/qdev.h"
25 #include "qemu/error-report.h"
26 
27 # define NAND_CMD_READ0		0x00
28 # define NAND_CMD_READ1		0x01
29 # define NAND_CMD_READ2		0x50
30 # define NAND_CMD_LPREAD2	0x30
31 # define NAND_CMD_NOSERIALREAD2	0x35
32 # define NAND_CMD_RANDOMREAD1	0x05
33 # define NAND_CMD_RANDOMREAD2	0xe0
34 # define NAND_CMD_READID	0x90
35 # define NAND_CMD_RESET		0xff
36 # define NAND_CMD_PAGEPROGRAM1	0x80
37 # define NAND_CMD_PAGEPROGRAM2	0x10
38 # define NAND_CMD_CACHEPROGRAM2	0x15
39 # define NAND_CMD_BLOCKERASE1	0x60
40 # define NAND_CMD_BLOCKERASE2	0xd0
41 # define NAND_CMD_READSTATUS	0x70
42 # define NAND_CMD_COPYBACKPRG1	0x85
43 
44 # define NAND_IOSTATUS_ERROR	(1 << 0)
45 # define NAND_IOSTATUS_PLANE0	(1 << 1)
46 # define NAND_IOSTATUS_PLANE1	(1 << 2)
47 # define NAND_IOSTATUS_PLANE2	(1 << 3)
48 # define NAND_IOSTATUS_PLANE3	(1 << 4)
49 # define NAND_IOSTATUS_READY    (1 << 6)
50 # define NAND_IOSTATUS_UNPROTCT	(1 << 7)
51 
52 # define MAX_PAGE		0x800
53 # define MAX_OOB		0x40
54 
55 typedef struct NANDFlashState NANDFlashState;
56 struct NANDFlashState {
57     DeviceState parent_obj;
58 
59     uint8_t manf_id, chip_id;
60     uint8_t buswidth; /* in BYTES */
61     int size, pages;
62     int page_shift, oob_shift, erase_shift, addr_shift;
63     uint8_t *storage;
64     BlockDriverState *bdrv;
65     int mem_oob;
66 
67     uint8_t cle, ale, ce, wp, gnd;
68 
69     uint8_t io[MAX_PAGE + MAX_OOB + 0x400];
70     uint8_t *ioaddr;
71     int iolen;
72 
73     uint32_t cmd;
74     uint64_t addr;
75     int addrlen;
76     int status;
77     int offset;
78 
79     void (*blk_write)(NANDFlashState *s);
80     void (*blk_erase)(NANDFlashState *s);
81     void (*blk_load)(NANDFlashState *s, uint64_t addr, int offset);
82 
83     uint32_t ioaddr_vmstate;
84 };
85 
86 #define TYPE_NAND "nand"
87 
88 #define NAND(obj) \
89     OBJECT_CHECK(NANDFlashState, (obj), TYPE_NAND)
90 
91 static void mem_and(uint8_t *dest, const uint8_t *src, size_t n)
92 {
93     /* Like memcpy() but we logical-AND the data into the destination */
94     int i;
95     for (i = 0; i < n; i++) {
96         dest[i] &= src[i];
97     }
98 }
99 
100 # define NAND_NO_AUTOINCR	0x00000001
101 # define NAND_BUSWIDTH_16	0x00000002
102 # define NAND_NO_PADDING	0x00000004
103 # define NAND_CACHEPRG		0x00000008
104 # define NAND_COPYBACK		0x00000010
105 # define NAND_IS_AND		0x00000020
106 # define NAND_4PAGE_ARRAY	0x00000040
107 # define NAND_NO_READRDY	0x00000100
108 # define NAND_SAMSUNG_LP	(NAND_NO_PADDING | NAND_COPYBACK)
109 
110 # define NAND_IO
111 
112 # define PAGE(addr)		((addr) >> ADDR_SHIFT)
113 # define PAGE_START(page)	(PAGE(page) * (PAGE_SIZE + OOB_SIZE))
114 # define PAGE_MASK		((1 << ADDR_SHIFT) - 1)
115 # define OOB_SHIFT		(PAGE_SHIFT - 5)
116 # define OOB_SIZE		(1 << OOB_SHIFT)
117 # define SECTOR(addr)		((addr) >> (9 + ADDR_SHIFT - PAGE_SHIFT))
118 # define SECTOR_OFFSET(addr)	((addr) & ((511 >> PAGE_SHIFT) << 8))
119 
120 # define PAGE_SIZE		256
121 # define PAGE_SHIFT		8
122 # define PAGE_SECTORS		1
123 # define ADDR_SHIFT		8
124 # include "nand.c"
125 # define PAGE_SIZE		512
126 # define PAGE_SHIFT		9
127 # define PAGE_SECTORS		1
128 # define ADDR_SHIFT		8
129 # include "nand.c"
130 # define PAGE_SIZE		2048
131 # define PAGE_SHIFT		11
132 # define PAGE_SECTORS		4
133 # define ADDR_SHIFT		16
134 # include "nand.c"
135 
136 /* Information based on Linux drivers/mtd/nand/nand_ids.c */
137 static const struct {
138     int size;
139     int width;
140     int page_shift;
141     int erase_shift;
142     uint32_t options;
143 } nand_flash_ids[0x100] = {
144     [0 ... 0xff] = { 0 },
145 
146     [0x6e] = { 1,	8,	8, 4, 0 },
147     [0x64] = { 2,	8,	8, 4, 0 },
148     [0x6b] = { 4,	8,	9, 4, 0 },
149     [0xe8] = { 1,	8,	8, 4, 0 },
150     [0xec] = { 1,	8,	8, 4, 0 },
151     [0xea] = { 2,	8,	8, 4, 0 },
152     [0xd5] = { 4,	8,	9, 4, 0 },
153     [0xe3] = { 4,	8,	9, 4, 0 },
154     [0xe5] = { 4,	8,	9, 4, 0 },
155     [0xd6] = { 8,	8,	9, 4, 0 },
156 
157     [0x39] = { 8,	8,	9, 4, 0 },
158     [0xe6] = { 8,	8,	9, 4, 0 },
159     [0x49] = { 8,	16,	9, 4, NAND_BUSWIDTH_16 },
160     [0x59] = { 8,	16,	9, 4, NAND_BUSWIDTH_16 },
161 
162     [0x33] = { 16,	8,	9, 5, 0 },
163     [0x73] = { 16,	8,	9, 5, 0 },
164     [0x43] = { 16,	16,	9, 5, NAND_BUSWIDTH_16 },
165     [0x53] = { 16,	16,	9, 5, NAND_BUSWIDTH_16 },
166 
167     [0x35] = { 32,	8,	9, 5, 0 },
168     [0x75] = { 32,	8,	9, 5, 0 },
169     [0x45] = { 32,	16,	9, 5, NAND_BUSWIDTH_16 },
170     [0x55] = { 32,	16,	9, 5, NAND_BUSWIDTH_16 },
171 
172     [0x36] = { 64,	8,	9, 5, 0 },
173     [0x76] = { 64,	8,	9, 5, 0 },
174     [0x46] = { 64,	16,	9, 5, NAND_BUSWIDTH_16 },
175     [0x56] = { 64,	16,	9, 5, NAND_BUSWIDTH_16 },
176 
177     [0x78] = { 128,	8,	9, 5, 0 },
178     [0x39] = { 128,	8,	9, 5, 0 },
179     [0x79] = { 128,	8,	9, 5, 0 },
180     [0x72] = { 128,	16,	9, 5, NAND_BUSWIDTH_16 },
181     [0x49] = { 128,	16,	9, 5, NAND_BUSWIDTH_16 },
182     [0x74] = { 128,	16,	9, 5, NAND_BUSWIDTH_16 },
183     [0x59] = { 128,	16,	9, 5, NAND_BUSWIDTH_16 },
184 
185     [0x71] = { 256,	8,	9, 5, 0 },
186 
187     /*
188      * These are the new chips with large page size. The pagesize and the
189      * erasesize is determined from the extended id bytes
190      */
191 # define LP_OPTIONS	(NAND_SAMSUNG_LP | NAND_NO_READRDY | NAND_NO_AUTOINCR)
192 # define LP_OPTIONS16	(LP_OPTIONS | NAND_BUSWIDTH_16)
193 
194     /* 512 Megabit */
195     [0xa2] = { 64,	8,	0, 0, LP_OPTIONS },
196     [0xf2] = { 64,	8,	0, 0, LP_OPTIONS },
197     [0xb2] = { 64,	16,	0, 0, LP_OPTIONS16 },
198     [0xc2] = { 64,	16,	0, 0, LP_OPTIONS16 },
199 
200     /* 1 Gigabit */
201     [0xa1] = { 128,	8,	0, 0, LP_OPTIONS },
202     [0xf1] = { 128,	8,	0, 0, LP_OPTIONS },
203     [0xb1] = { 128,	16,	0, 0, LP_OPTIONS16 },
204     [0xc1] = { 128,	16,	0, 0, LP_OPTIONS16 },
205 
206     /* 2 Gigabit */
207     [0xaa] = { 256,	8,	0, 0, LP_OPTIONS },
208     [0xda] = { 256,	8,	0, 0, LP_OPTIONS },
209     [0xba] = { 256,	16,	0, 0, LP_OPTIONS16 },
210     [0xca] = { 256,	16,	0, 0, LP_OPTIONS16 },
211 
212     /* 4 Gigabit */
213     [0xac] = { 512,	8,	0, 0, LP_OPTIONS },
214     [0xdc] = { 512,	8,	0, 0, LP_OPTIONS },
215     [0xbc] = { 512,	16,	0, 0, LP_OPTIONS16 },
216     [0xcc] = { 512,	16,	0, 0, LP_OPTIONS16 },
217 
218     /* 8 Gigabit */
219     [0xa3] = { 1024,	8,	0, 0, LP_OPTIONS },
220     [0xd3] = { 1024,	8,	0, 0, LP_OPTIONS },
221     [0xb3] = { 1024,	16,	0, 0, LP_OPTIONS16 },
222     [0xc3] = { 1024,	16,	0, 0, LP_OPTIONS16 },
223 
224     /* 16 Gigabit */
225     [0xa5] = { 2048,	8,	0, 0, LP_OPTIONS },
226     [0xd5] = { 2048,	8,	0, 0, LP_OPTIONS },
227     [0xb5] = { 2048,	16,	0, 0, LP_OPTIONS16 },
228     [0xc5] = { 2048,	16,	0, 0, LP_OPTIONS16 },
229 };
230 
231 static void nand_reset(DeviceState *dev)
232 {
233     NANDFlashState *s = NAND(dev);
234     s->cmd = NAND_CMD_READ0;
235     s->addr = 0;
236     s->addrlen = 0;
237     s->iolen = 0;
238     s->offset = 0;
239     s->status &= NAND_IOSTATUS_UNPROTCT;
240     s->status |= NAND_IOSTATUS_READY;
241 }
242 
243 static inline void nand_pushio_byte(NANDFlashState *s, uint8_t value)
244 {
245     s->ioaddr[s->iolen++] = value;
246     for (value = s->buswidth; --value;) {
247         s->ioaddr[s->iolen++] = 0;
248     }
249 }
250 
251 static void nand_command(NANDFlashState *s)
252 {
253     unsigned int offset;
254     switch (s->cmd) {
255     case NAND_CMD_READ0:
256         s->iolen = 0;
257         break;
258 
259     case NAND_CMD_READID:
260         s->ioaddr = s->io;
261         s->iolen = 0;
262         nand_pushio_byte(s, s->manf_id);
263         nand_pushio_byte(s, s->chip_id);
264         nand_pushio_byte(s, 'Q'); /* Don't-care byte (often 0xa5) */
265         if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
266             /* Page Size, Block Size, Spare Size; bit 6 indicates
267              * 8 vs 16 bit width NAND.
268              */
269             nand_pushio_byte(s, (s->buswidth == 2) ? 0x55 : 0x15);
270         } else {
271             nand_pushio_byte(s, 0xc0); /* Multi-plane */
272         }
273         break;
274 
275     case NAND_CMD_RANDOMREAD2:
276     case NAND_CMD_NOSERIALREAD2:
277         if (!(nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP))
278             break;
279         offset = s->addr & ((1 << s->addr_shift) - 1);
280         s->blk_load(s, s->addr, offset);
281         if (s->gnd)
282             s->iolen = (1 << s->page_shift) - offset;
283         else
284             s->iolen = (1 << s->page_shift) + (1 << s->oob_shift) - offset;
285         break;
286 
287     case NAND_CMD_RESET:
288         nand_reset(DEVICE(s));
289         break;
290 
291     case NAND_CMD_PAGEPROGRAM1:
292         s->ioaddr = s->io;
293         s->iolen = 0;
294         break;
295 
296     case NAND_CMD_PAGEPROGRAM2:
297         if (s->wp) {
298             s->blk_write(s);
299         }
300         break;
301 
302     case NAND_CMD_BLOCKERASE1:
303         break;
304 
305     case NAND_CMD_BLOCKERASE2:
306         s->addr &= (1ull << s->addrlen * 8) - 1;
307         s->addr <<= nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP ?
308                                                                     16 : 8;
309 
310         if (s->wp) {
311             s->blk_erase(s);
312         }
313         break;
314 
315     case NAND_CMD_READSTATUS:
316         s->ioaddr = s->io;
317         s->iolen = 0;
318         nand_pushio_byte(s, s->status);
319         break;
320 
321     default:
322         printf("%s: Unknown NAND command 0x%02x\n", __FUNCTION__, s->cmd);
323     }
324 }
325 
326 static void nand_pre_save(void *opaque)
327 {
328     NANDFlashState *s = NAND(opaque);
329 
330     s->ioaddr_vmstate = s->ioaddr - s->io;
331 }
332 
333 static int nand_post_load(void *opaque, int version_id)
334 {
335     NANDFlashState *s = NAND(opaque);
336 
337     if (s->ioaddr_vmstate > sizeof(s->io)) {
338         return -EINVAL;
339     }
340     s->ioaddr = s->io + s->ioaddr_vmstate;
341 
342     return 0;
343 }
344 
345 static const VMStateDescription vmstate_nand = {
346     .name = "nand",
347     .version_id = 1,
348     .minimum_version_id = 1,
349     .minimum_version_id_old = 1,
350     .pre_save = nand_pre_save,
351     .post_load = nand_post_load,
352     .fields      = (VMStateField[]) {
353         VMSTATE_UINT8(cle, NANDFlashState),
354         VMSTATE_UINT8(ale, NANDFlashState),
355         VMSTATE_UINT8(ce, NANDFlashState),
356         VMSTATE_UINT8(wp, NANDFlashState),
357         VMSTATE_UINT8(gnd, NANDFlashState),
358         VMSTATE_BUFFER(io, NANDFlashState),
359         VMSTATE_UINT32(ioaddr_vmstate, NANDFlashState),
360         VMSTATE_INT32(iolen, NANDFlashState),
361         VMSTATE_UINT32(cmd, NANDFlashState),
362         VMSTATE_UINT64(addr, NANDFlashState),
363         VMSTATE_INT32(addrlen, NANDFlashState),
364         VMSTATE_INT32(status, NANDFlashState),
365         VMSTATE_INT32(offset, NANDFlashState),
366         /* XXX: do we want to save s->storage too? */
367         VMSTATE_END_OF_LIST()
368     }
369 };
370 
371 static void nand_realize(DeviceState *dev, Error **errp)
372 {
373     int pagesize;
374     NANDFlashState *s = NAND(dev);
375 
376     s->buswidth = nand_flash_ids[s->chip_id].width >> 3;
377     s->size = nand_flash_ids[s->chip_id].size << 20;
378     if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
379         s->page_shift = 11;
380         s->erase_shift = 6;
381     } else {
382         s->page_shift = nand_flash_ids[s->chip_id].page_shift;
383         s->erase_shift = nand_flash_ids[s->chip_id].erase_shift;
384     }
385 
386     switch (1 << s->page_shift) {
387     case 256:
388         nand_init_256(s);
389         break;
390     case 512:
391         nand_init_512(s);
392         break;
393     case 2048:
394         nand_init_2048(s);
395         break;
396     default:
397         error_setg(errp, "Unsupported NAND block size %#x\n",
398                    1 << s->page_shift);
399         return;
400     }
401 
402     pagesize = 1 << s->oob_shift;
403     s->mem_oob = 1;
404     if (s->bdrv) {
405         if (bdrv_is_read_only(s->bdrv)) {
406             error_setg(errp, "Can't use a read-only drive");
407             return;
408         }
409         if (bdrv_getlength(s->bdrv) >=
410                 (s->pages << s->page_shift) + (s->pages << s->oob_shift)) {
411             pagesize = 0;
412             s->mem_oob = 0;
413         }
414     } else {
415         pagesize += 1 << s->page_shift;
416     }
417     if (pagesize) {
418         s->storage = (uint8_t *) memset(g_malloc(s->pages * pagesize),
419                         0xff, s->pages * pagesize);
420     }
421     /* Give s->ioaddr a sane value in case we save state before it is used. */
422     s->ioaddr = s->io;
423 }
424 
425 static Property nand_properties[] = {
426     DEFINE_PROP_UINT8("manufacturer_id", NANDFlashState, manf_id, 0),
427     DEFINE_PROP_UINT8("chip_id", NANDFlashState, chip_id, 0),
428     DEFINE_PROP_DRIVE("drive", NANDFlashState, bdrv),
429     DEFINE_PROP_END_OF_LIST(),
430 };
431 
432 static void nand_class_init(ObjectClass *klass, void *data)
433 {
434     DeviceClass *dc = DEVICE_CLASS(klass);
435 
436     dc->realize = nand_realize;
437     dc->reset = nand_reset;
438     dc->vmsd = &vmstate_nand;
439     dc->props = nand_properties;
440 }
441 
442 static const TypeInfo nand_info = {
443     .name          = TYPE_NAND,
444     .parent        = TYPE_DEVICE,
445     .instance_size = sizeof(NANDFlashState),
446     .class_init    = nand_class_init,
447 };
448 
449 static void nand_register_types(void)
450 {
451     type_register_static(&nand_info);
452 }
453 
454 /*
455  * Chip inputs are CLE, ALE, CE, WP, GND and eight I/O pins.  Chip
456  * outputs are R/B and eight I/O pins.
457  *
458  * CE, WP and R/B are active low.
459  */
460 void nand_setpins(DeviceState *dev, uint8_t cle, uint8_t ale,
461                   uint8_t ce, uint8_t wp, uint8_t gnd)
462 {
463     NANDFlashState *s = NAND(dev);
464 
465     s->cle = cle;
466     s->ale = ale;
467     s->ce = ce;
468     s->wp = wp;
469     s->gnd = gnd;
470     if (wp) {
471         s->status |= NAND_IOSTATUS_UNPROTCT;
472     } else {
473         s->status &= ~NAND_IOSTATUS_UNPROTCT;
474     }
475 }
476 
477 void nand_getpins(DeviceState *dev, int *rb)
478 {
479     *rb = 1;
480 }
481 
482 void nand_setio(DeviceState *dev, uint32_t value)
483 {
484     int i;
485     NANDFlashState *s = NAND(dev);
486 
487     if (!s->ce && s->cle) {
488         if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
489             if (s->cmd == NAND_CMD_READ0 && value == NAND_CMD_LPREAD2)
490                 return;
491             if (value == NAND_CMD_RANDOMREAD1) {
492                 s->addr &= ~((1 << s->addr_shift) - 1);
493                 s->addrlen = 0;
494                 return;
495             }
496         }
497         if (value == NAND_CMD_READ0) {
498             s->offset = 0;
499         } else if (value == NAND_CMD_READ1) {
500             s->offset = 0x100;
501             value = NAND_CMD_READ0;
502         } else if (value == NAND_CMD_READ2) {
503             s->offset = 1 << s->page_shift;
504             value = NAND_CMD_READ0;
505         }
506 
507         s->cmd = value;
508 
509         if (s->cmd == NAND_CMD_READSTATUS ||
510                 s->cmd == NAND_CMD_PAGEPROGRAM2 ||
511                 s->cmd == NAND_CMD_BLOCKERASE1 ||
512                 s->cmd == NAND_CMD_BLOCKERASE2 ||
513                 s->cmd == NAND_CMD_NOSERIALREAD2 ||
514                 s->cmd == NAND_CMD_RANDOMREAD2 ||
515                 s->cmd == NAND_CMD_RESET) {
516             nand_command(s);
517         }
518 
519         if (s->cmd != NAND_CMD_RANDOMREAD2) {
520             s->addrlen = 0;
521         }
522     }
523 
524     if (s->ale) {
525         unsigned int shift = s->addrlen * 8;
526         unsigned int mask = ~(0xff << shift);
527         unsigned int v = value << shift;
528 
529         s->addr = (s->addr & mask) | v;
530         s->addrlen ++;
531 
532         switch (s->addrlen) {
533         case 1:
534             if (s->cmd == NAND_CMD_READID) {
535                 nand_command(s);
536             }
537             break;
538         case 2: /* fix cache address as a byte address */
539             s->addr <<= (s->buswidth - 1);
540             break;
541         case 3:
542             if (!(nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
543                     (s->cmd == NAND_CMD_READ0 ||
544                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
545                 nand_command(s);
546             }
547             break;
548         case 4:
549             if ((nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
550                     nand_flash_ids[s->chip_id].size < 256 && /* 1Gb or less */
551                     (s->cmd == NAND_CMD_READ0 ||
552                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
553                 nand_command(s);
554             }
555             break;
556         case 5:
557             if ((nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
558                     nand_flash_ids[s->chip_id].size >= 256 && /* 2Gb or more */
559                     (s->cmd == NAND_CMD_READ0 ||
560                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
561                 nand_command(s);
562             }
563             break;
564         default:
565             break;
566         }
567     }
568 
569     if (!s->cle && !s->ale && s->cmd == NAND_CMD_PAGEPROGRAM1) {
570         if (s->iolen < (1 << s->page_shift) + (1 << s->oob_shift)) {
571             for (i = s->buswidth; i--; value >>= 8) {
572                 s->io[s->iolen ++] = (uint8_t) (value & 0xff);
573             }
574         }
575     } else if (!s->cle && !s->ale && s->cmd == NAND_CMD_COPYBACKPRG1) {
576         if ((s->addr & ((1 << s->addr_shift) - 1)) <
577                 (1 << s->page_shift) + (1 << s->oob_shift)) {
578             for (i = s->buswidth; i--; s->addr++, value >>= 8) {
579                 s->io[s->iolen + (s->addr & ((1 << s->addr_shift) - 1))] =
580                     (uint8_t) (value & 0xff);
581             }
582         }
583     }
584 }
585 
586 uint32_t nand_getio(DeviceState *dev)
587 {
588     int offset;
589     uint32_t x = 0;
590     NANDFlashState *s = NAND(dev);
591 
592     /* Allow sequential reading */
593     if (!s->iolen && s->cmd == NAND_CMD_READ0) {
594         offset = (int) (s->addr & ((1 << s->addr_shift) - 1)) + s->offset;
595         s->offset = 0;
596 
597         s->blk_load(s, s->addr, offset);
598         if (s->gnd)
599             s->iolen = (1 << s->page_shift) - offset;
600         else
601             s->iolen = (1 << s->page_shift) + (1 << s->oob_shift) - offset;
602     }
603 
604     if (s->ce || s->iolen <= 0) {
605         return 0;
606     }
607 
608     for (offset = s->buswidth; offset--;) {
609         x |= s->ioaddr[offset] << (offset << 3);
610     }
611     /* after receiving READ STATUS command all subsequent reads will
612      * return the status register value until another command is issued
613      */
614     if (s->cmd != NAND_CMD_READSTATUS) {
615         s->addr   += s->buswidth;
616         s->ioaddr += s->buswidth;
617         s->iolen  -= s->buswidth;
618     }
619     return x;
620 }
621 
622 uint32_t nand_getbuswidth(DeviceState *dev)
623 {
624     NANDFlashState *s = (NANDFlashState *) dev;
625     return s->buswidth << 3;
626 }
627 
628 DeviceState *nand_init(BlockDriverState *bdrv, int manf_id, int chip_id)
629 {
630     DeviceState *dev;
631 
632     if (nand_flash_ids[chip_id].size == 0) {
633         hw_error("%s: Unsupported NAND chip ID.\n", __FUNCTION__);
634     }
635     dev = DEVICE(object_new(TYPE_NAND));
636     qdev_prop_set_uint8(dev, "manufacturer_id", manf_id);
637     qdev_prop_set_uint8(dev, "chip_id", chip_id);
638     if (bdrv) {
639         qdev_prop_set_drive_nofail(dev, "drive", bdrv);
640     }
641 
642     qdev_init_nofail(dev);
643     return dev;
644 }
645 
646 type_init(nand_register_types)
647 
648 #else
649 
650 /* Program a single page */
651 static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
652 {
653     uint64_t off, page, sector, soff;
654     uint8_t iobuf[(PAGE_SECTORS + 2) * 0x200];
655     if (PAGE(s->addr) >= s->pages)
656         return;
657 
658     if (!s->bdrv) {
659         mem_and(s->storage + PAGE_START(s->addr) + (s->addr & PAGE_MASK) +
660                         s->offset, s->io, s->iolen);
661     } else if (s->mem_oob) {
662         sector = SECTOR(s->addr);
663         off = (s->addr & PAGE_MASK) + s->offset;
664         soff = SECTOR_OFFSET(s->addr);
665         if (bdrv_read(s->bdrv, sector, iobuf, PAGE_SECTORS) < 0) {
666             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
667             return;
668         }
669 
670         mem_and(iobuf + (soff | off), s->io, MIN(s->iolen, PAGE_SIZE - off));
671         if (off + s->iolen > PAGE_SIZE) {
672             page = PAGE(s->addr);
673             mem_and(s->storage + (page << OOB_SHIFT), s->io + PAGE_SIZE - off,
674                             MIN(OOB_SIZE, off + s->iolen - PAGE_SIZE));
675         }
676 
677         if (bdrv_write(s->bdrv, sector, iobuf, PAGE_SECTORS) < 0) {
678             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
679         }
680     } else {
681         off = PAGE_START(s->addr) + (s->addr & PAGE_MASK) + s->offset;
682         sector = off >> 9;
683         soff = off & 0x1ff;
684         if (bdrv_read(s->bdrv, sector, iobuf, PAGE_SECTORS + 2) < 0) {
685             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
686             return;
687         }
688 
689         mem_and(iobuf + soff, s->io, s->iolen);
690 
691         if (bdrv_write(s->bdrv, sector, iobuf, PAGE_SECTORS + 2) < 0) {
692             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
693         }
694     }
695     s->offset = 0;
696 }
697 
698 /* Erase a single block */
699 static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
700 {
701     uint64_t i, page, addr;
702     uint8_t iobuf[0x200] = { [0 ... 0x1ff] = 0xff, };
703     addr = s->addr & ~((1 << (ADDR_SHIFT + s->erase_shift)) - 1);
704 
705     if (PAGE(addr) >= s->pages) {
706         return;
707     }
708 
709     if (!s->bdrv) {
710         memset(s->storage + PAGE_START(addr),
711                         0xff, (PAGE_SIZE + OOB_SIZE) << s->erase_shift);
712     } else if (s->mem_oob) {
713         memset(s->storage + (PAGE(addr) << OOB_SHIFT),
714                         0xff, OOB_SIZE << s->erase_shift);
715         i = SECTOR(addr);
716         page = SECTOR(addr + (ADDR_SHIFT + s->erase_shift));
717         for (; i < page; i ++)
718             if (bdrv_write(s->bdrv, i, iobuf, 1) < 0) {
719                 printf("%s: write error in sector %" PRIu64 "\n", __func__, i);
720             }
721     } else {
722         addr = PAGE_START(addr);
723         page = addr >> 9;
724         if (bdrv_read(s->bdrv, page, iobuf, 1) < 0) {
725             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
726         }
727         memset(iobuf + (addr & 0x1ff), 0xff, (~addr & 0x1ff) + 1);
728         if (bdrv_write(s->bdrv, page, iobuf, 1) < 0) {
729             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
730         }
731 
732         memset(iobuf, 0xff, 0x200);
733         i = (addr & ~0x1ff) + 0x200;
734         for (addr += ((PAGE_SIZE + OOB_SIZE) << s->erase_shift) - 0x200;
735                         i < addr; i += 0x200) {
736             if (bdrv_write(s->bdrv, i >> 9, iobuf, 1) < 0) {
737                 printf("%s: write error in sector %" PRIu64 "\n",
738                        __func__, i >> 9);
739             }
740         }
741 
742         page = i >> 9;
743         if (bdrv_read(s->bdrv, page, iobuf, 1) < 0) {
744             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
745         }
746         memset(iobuf, 0xff, ((addr - 1) & 0x1ff) + 1);
747         if (bdrv_write(s->bdrv, page, iobuf, 1) < 0) {
748             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
749         }
750     }
751 }
752 
753 static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,
754                 uint64_t addr, int offset)
755 {
756     if (PAGE(addr) >= s->pages) {
757         return;
758     }
759 
760     if (s->bdrv) {
761         if (s->mem_oob) {
762             if (bdrv_read(s->bdrv, SECTOR(addr), s->io, PAGE_SECTORS) < 0) {
763                 printf("%s: read error in sector %" PRIu64 "\n",
764                                 __func__, SECTOR(addr));
765             }
766             memcpy(s->io + SECTOR_OFFSET(s->addr) + PAGE_SIZE,
767                             s->storage + (PAGE(s->addr) << OOB_SHIFT),
768                             OOB_SIZE);
769             s->ioaddr = s->io + SECTOR_OFFSET(s->addr) + offset;
770         } else {
771             if (bdrv_read(s->bdrv, PAGE_START(addr) >> 9,
772                                     s->io, (PAGE_SECTORS + 2)) < 0) {
773                 printf("%s: read error in sector %" PRIu64 "\n",
774                                 __func__, PAGE_START(addr) >> 9);
775             }
776             s->ioaddr = s->io + (PAGE_START(addr) & 0x1ff) + offset;
777         }
778     } else {
779         memcpy(s->io, s->storage + PAGE_START(s->addr) +
780                         offset, PAGE_SIZE + OOB_SIZE - offset);
781         s->ioaddr = s->io;
782     }
783 }
784 
785 static void glue(nand_init_, PAGE_SIZE)(NANDFlashState *s)
786 {
787     s->oob_shift = PAGE_SHIFT - 5;
788     s->pages = s->size >> PAGE_SHIFT;
789     s->addr_shift = ADDR_SHIFT;
790 
791     s->blk_erase = glue(nand_blk_erase_, PAGE_SIZE);
792     s->blk_write = glue(nand_blk_write_, PAGE_SIZE);
793     s->blk_load = glue(nand_blk_load_, PAGE_SIZE);
794 }
795 
796 # undef PAGE_SIZE
797 # undef PAGE_SHIFT
798 # undef PAGE_SECTORS
799 # undef ADDR_SHIFT
800 #endif	/* NAND_IO */
801