xref: /openbmc/qemu/hw/block/nand.c (revision 1d76437b)
1 /*
2  * Flash NAND memory emulation.  Based on "16M x 8 Bit NAND Flash
3  * Memory" datasheet for the KM29U128AT / K9F2808U0A chips from
4  * Samsung Electronic.
5  *
6  * Copyright (c) 2006 Openedhand Ltd.
7  * Written by Andrzej Zaborowski <balrog@zabor.org>
8  *
9  * Support for additional features based on "MT29F2G16ABCWP 2Gx16"
10  * datasheet from Micron Technology and "NAND02G-B2C" datasheet
11  * from ST Microelectronics.
12  *
13  * This code is licensed under the GNU GPL v2.
14  *
15  * Contributions after 2012-01-13 are licensed under the terms of the
16  * GNU GPL, version 2 or (at your option) any later version.
17  */
18 
19 #ifndef NAND_IO
20 
21 #include "qemu/osdep.h"
22 #include "hw/hw.h"
23 #include "hw/qdev-properties.h"
24 #include "hw/qdev-properties-system.h"
25 #include "hw/block/flash.h"
26 #include "sysemu/block-backend.h"
27 #include "migration/vmstate.h"
28 #include "qapi/error.h"
29 #include "qemu/error-report.h"
30 #include "qemu/module.h"
31 #include "qom/object.h"
32 
33 # define NAND_CMD_READ0		0x00
34 # define NAND_CMD_READ1		0x01
35 # define NAND_CMD_READ2		0x50
36 # define NAND_CMD_LPREAD2	0x30
37 # define NAND_CMD_NOSERIALREAD2	0x35
38 # define NAND_CMD_RANDOMREAD1	0x05
39 # define NAND_CMD_RANDOMREAD2	0xe0
40 # define NAND_CMD_READID	0x90
41 # define NAND_CMD_RESET		0xff
42 # define NAND_CMD_PAGEPROGRAM1	0x80
43 # define NAND_CMD_PAGEPROGRAM2	0x10
44 # define NAND_CMD_CACHEPROGRAM2	0x15
45 # define NAND_CMD_BLOCKERASE1	0x60
46 # define NAND_CMD_BLOCKERASE2	0xd0
47 # define NAND_CMD_READSTATUS	0x70
48 # define NAND_CMD_COPYBACKPRG1	0x85
49 
50 # define NAND_IOSTATUS_ERROR	(1 << 0)
51 # define NAND_IOSTATUS_PLANE0	(1 << 1)
52 # define NAND_IOSTATUS_PLANE1	(1 << 2)
53 # define NAND_IOSTATUS_PLANE2	(1 << 3)
54 # define NAND_IOSTATUS_PLANE3	(1 << 4)
55 # define NAND_IOSTATUS_READY    (1 << 6)
56 # define NAND_IOSTATUS_UNPROTCT	(1 << 7)
57 
58 # define MAX_PAGE		0x800
59 # define MAX_OOB		0x40
60 
61 typedef struct NANDFlashState NANDFlashState;
62 struct NANDFlashState {
63     DeviceState parent_obj;
64 
65     uint8_t manf_id, chip_id;
66     uint8_t buswidth; /* in BYTES */
67     int size, pages;
68     int page_shift, oob_shift, erase_shift, addr_shift;
69     uint8_t *storage;
70     BlockBackend *blk;
71     int mem_oob;
72 
73     uint8_t cle, ale, ce, wp, gnd;
74 
75     uint8_t io[MAX_PAGE + MAX_OOB + 0x400];
76     uint8_t *ioaddr;
77     int iolen;
78 
79     uint32_t cmd;
80     uint64_t addr;
81     int addrlen;
82     int status;
83     int offset;
84 
85     void (*blk_write)(NANDFlashState *s);
86     void (*blk_erase)(NANDFlashState *s);
87     void (*blk_load)(NANDFlashState *s, uint64_t addr, int offset);
88 
89     uint32_t ioaddr_vmstate;
90 };
91 
92 #define TYPE_NAND "nand"
93 
94 OBJECT_DECLARE_SIMPLE_TYPE(NANDFlashState, NAND)
95 
96 static void mem_and(uint8_t *dest, const uint8_t *src, size_t n)
97 {
98     /* Like memcpy() but we logical-AND the data into the destination */
99     int i;
100     for (i = 0; i < n; i++) {
101         dest[i] &= src[i];
102     }
103 }
104 
105 # define NAND_NO_AUTOINCR	0x00000001
106 # define NAND_BUSWIDTH_16	0x00000002
107 # define NAND_NO_PADDING	0x00000004
108 # define NAND_CACHEPRG		0x00000008
109 # define NAND_COPYBACK		0x00000010
110 # define NAND_IS_AND		0x00000020
111 # define NAND_4PAGE_ARRAY	0x00000040
112 # define NAND_NO_READRDY	0x00000100
113 # define NAND_SAMSUNG_LP	(NAND_NO_PADDING | NAND_COPYBACK)
114 
115 # define NAND_IO
116 
117 # define PAGE(addr)		((addr) >> ADDR_SHIFT)
118 # define PAGE_START(page)       (PAGE(page) * (NAND_PAGE_SIZE + OOB_SIZE))
119 # define PAGE_MASK		((1 << ADDR_SHIFT) - 1)
120 # define OOB_SHIFT		(PAGE_SHIFT - 5)
121 # define OOB_SIZE		(1 << OOB_SHIFT)
122 # define SECTOR(addr)		((addr) >> (9 + ADDR_SHIFT - PAGE_SHIFT))
123 # define SECTOR_OFFSET(addr)	((addr) & ((511 >> PAGE_SHIFT) << 8))
124 
125 # define NAND_PAGE_SIZE         256
126 # define PAGE_SHIFT		8
127 # define PAGE_SECTORS		1
128 # define ADDR_SHIFT		8
129 # include "nand.c"
130 # define NAND_PAGE_SIZE         512
131 # define PAGE_SHIFT		9
132 # define PAGE_SECTORS		1
133 # define ADDR_SHIFT		8
134 # include "nand.c"
135 # define NAND_PAGE_SIZE         2048
136 # define PAGE_SHIFT		11
137 # define PAGE_SECTORS		4
138 # define ADDR_SHIFT		16
139 # include "nand.c"
140 
141 /* Information based on Linux drivers/mtd/nand/raw/nand_ids.c */
142 static const struct {
143     int size;
144     int width;
145     int page_shift;
146     int erase_shift;
147     uint32_t options;
148 } nand_flash_ids[0x100] = {
149     [0 ... 0xff] = { 0 },
150 
151     [0x6b] = { 4,	8,	9, 4, 0 },
152     [0xe3] = { 4,	8,	9, 4, 0 },
153     [0xe5] = { 4,	8,	9, 4, 0 },
154     [0xd6] = { 8,	8,	9, 4, 0 },
155     [0xe6] = { 8,	8,	9, 4, 0 },
156 
157     [0x33] = { 16,	8,	9, 5, 0 },
158     [0x73] = { 16,	8,	9, 5, 0 },
159     [0x43] = { 16,	16,	9, 5, NAND_BUSWIDTH_16 },
160     [0x53] = { 16,	16,	9, 5, NAND_BUSWIDTH_16 },
161 
162     [0x35] = { 32,	8,	9, 5, 0 },
163     [0x75] = { 32,	8,	9, 5, 0 },
164     [0x45] = { 32,	16,	9, 5, NAND_BUSWIDTH_16 },
165     [0x55] = { 32,	16,	9, 5, NAND_BUSWIDTH_16 },
166 
167     [0x36] = { 64,	8,	9, 5, 0 },
168     [0x76] = { 64,	8,	9, 5, 0 },
169     [0x46] = { 64,	16,	9, 5, NAND_BUSWIDTH_16 },
170     [0x56] = { 64,	16,	9, 5, NAND_BUSWIDTH_16 },
171 
172     [0x78] = { 128,	8,	9, 5, 0 },
173     [0x39] = { 128,	8,	9, 5, 0 },
174     [0x79] = { 128,	8,	9, 5, 0 },
175     [0x72] = { 128,	16,	9, 5, NAND_BUSWIDTH_16 },
176     [0x49] = { 128,	16,	9, 5, NAND_BUSWIDTH_16 },
177     [0x74] = { 128,	16,	9, 5, NAND_BUSWIDTH_16 },
178     [0x59] = { 128,	16,	9, 5, NAND_BUSWIDTH_16 },
179 
180     [0x71] = { 256,	8,	9, 5, 0 },
181 
182     /*
183      * These are the new chips with large page size. The pagesize and the
184      * erasesize is determined from the extended id bytes
185      */
186 # define LP_OPTIONS	(NAND_SAMSUNG_LP | NAND_NO_READRDY | NAND_NO_AUTOINCR)
187 # define LP_OPTIONS16	(LP_OPTIONS | NAND_BUSWIDTH_16)
188 
189     /* 512 Megabit */
190     [0xa2] = { 64,	8,	0, 0, LP_OPTIONS },
191     [0xf2] = { 64,	8,	0, 0, LP_OPTIONS },
192     [0xb2] = { 64,	16,	0, 0, LP_OPTIONS16 },
193     [0xc2] = { 64,	16,	0, 0, LP_OPTIONS16 },
194 
195     /* 1 Gigabit */
196     [0xa1] = { 128,	8,	0, 0, LP_OPTIONS },
197     [0xf1] = { 128,	8,	0, 0, LP_OPTIONS },
198     [0xb1] = { 128,	16,	0, 0, LP_OPTIONS16 },
199     [0xc1] = { 128,	16,	0, 0, LP_OPTIONS16 },
200 
201     /* 2 Gigabit */
202     [0xaa] = { 256,	8,	0, 0, LP_OPTIONS },
203     [0xda] = { 256,	8,	0, 0, LP_OPTIONS },
204     [0xba] = { 256,	16,	0, 0, LP_OPTIONS16 },
205     [0xca] = { 256,	16,	0, 0, LP_OPTIONS16 },
206 
207     /* 4 Gigabit */
208     [0xac] = { 512,	8,	0, 0, LP_OPTIONS },
209     [0xdc] = { 512,	8,	0, 0, LP_OPTIONS },
210     [0xbc] = { 512,	16,	0, 0, LP_OPTIONS16 },
211     [0xcc] = { 512,	16,	0, 0, LP_OPTIONS16 },
212 
213     /* 8 Gigabit */
214     [0xa3] = { 1024,	8,	0, 0, LP_OPTIONS },
215     [0xd3] = { 1024,	8,	0, 0, LP_OPTIONS },
216     [0xb3] = { 1024,	16,	0, 0, LP_OPTIONS16 },
217     [0xc3] = { 1024,	16,	0, 0, LP_OPTIONS16 },
218 
219     /* 16 Gigabit */
220     [0xa5] = { 2048,	8,	0, 0, LP_OPTIONS },
221     [0xd5] = { 2048,	8,	0, 0, LP_OPTIONS },
222     [0xb5] = { 2048,	16,	0, 0, LP_OPTIONS16 },
223     [0xc5] = { 2048,	16,	0, 0, LP_OPTIONS16 },
224 };
225 
226 static void nand_reset(DeviceState *dev)
227 {
228     NANDFlashState *s = NAND(dev);
229     s->cmd = NAND_CMD_READ0;
230     s->addr = 0;
231     s->addrlen = 0;
232     s->iolen = 0;
233     s->offset = 0;
234     s->status &= NAND_IOSTATUS_UNPROTCT;
235     s->status |= NAND_IOSTATUS_READY;
236 }
237 
238 static inline void nand_pushio_byte(NANDFlashState *s, uint8_t value)
239 {
240     s->ioaddr[s->iolen++] = value;
241     for (value = s->buswidth; --value;) {
242         s->ioaddr[s->iolen++] = 0;
243     }
244 }
245 
246 static void nand_command(NANDFlashState *s)
247 {
248     unsigned int offset;
249     switch (s->cmd) {
250     case NAND_CMD_READ0:
251         s->iolen = 0;
252         break;
253 
254     case NAND_CMD_READID:
255         s->ioaddr = s->io;
256         s->iolen = 0;
257         nand_pushio_byte(s, s->manf_id);
258         nand_pushio_byte(s, s->chip_id);
259         nand_pushio_byte(s, 'Q'); /* Don't-care byte (often 0xa5) */
260         if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
261             /* Page Size, Block Size, Spare Size; bit 6 indicates
262              * 8 vs 16 bit width NAND.
263              */
264             nand_pushio_byte(s, (s->buswidth == 2) ? 0x55 : 0x15);
265         } else {
266             nand_pushio_byte(s, 0xc0); /* Multi-plane */
267         }
268         break;
269 
270     case NAND_CMD_RANDOMREAD2:
271     case NAND_CMD_NOSERIALREAD2:
272         if (!(nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP))
273             break;
274         offset = s->addr & ((1 << s->addr_shift) - 1);
275         s->blk_load(s, s->addr, offset);
276         if (s->gnd)
277             s->iolen = (1 << s->page_shift) - offset;
278         else
279             s->iolen = (1 << s->page_shift) + (1 << s->oob_shift) - offset;
280         break;
281 
282     case NAND_CMD_RESET:
283         nand_reset(DEVICE(s));
284         break;
285 
286     case NAND_CMD_PAGEPROGRAM1:
287         s->ioaddr = s->io;
288         s->iolen = 0;
289         break;
290 
291     case NAND_CMD_PAGEPROGRAM2:
292         if (s->wp) {
293             s->blk_write(s);
294         }
295         break;
296 
297     case NAND_CMD_BLOCKERASE1:
298         break;
299 
300     case NAND_CMD_BLOCKERASE2:
301         s->addr &= (1ull << s->addrlen * 8) - 1;
302         s->addr <<= nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP ?
303                                                                     16 : 8;
304 
305         if (s->wp) {
306             s->blk_erase(s);
307         }
308         break;
309 
310     case NAND_CMD_READSTATUS:
311         s->ioaddr = s->io;
312         s->iolen = 0;
313         nand_pushio_byte(s, s->status);
314         break;
315 
316     default:
317         printf("%s: Unknown NAND command 0x%02x\n", __func__, s->cmd);
318     }
319 }
320 
321 static int nand_pre_save(void *opaque)
322 {
323     NANDFlashState *s = NAND(opaque);
324 
325     s->ioaddr_vmstate = s->ioaddr - s->io;
326 
327     return 0;
328 }
329 
330 static int nand_post_load(void *opaque, int version_id)
331 {
332     NANDFlashState *s = NAND(opaque);
333 
334     if (s->ioaddr_vmstate > sizeof(s->io)) {
335         return -EINVAL;
336     }
337     s->ioaddr = s->io + s->ioaddr_vmstate;
338 
339     return 0;
340 }
341 
342 static const VMStateDescription vmstate_nand = {
343     .name = "nand",
344     .version_id = 1,
345     .minimum_version_id = 1,
346     .pre_save = nand_pre_save,
347     .post_load = nand_post_load,
348     .fields = (VMStateField[]) {
349         VMSTATE_UINT8(cle, NANDFlashState),
350         VMSTATE_UINT8(ale, NANDFlashState),
351         VMSTATE_UINT8(ce, NANDFlashState),
352         VMSTATE_UINT8(wp, NANDFlashState),
353         VMSTATE_UINT8(gnd, NANDFlashState),
354         VMSTATE_BUFFER(io, NANDFlashState),
355         VMSTATE_UINT32(ioaddr_vmstate, NANDFlashState),
356         VMSTATE_INT32(iolen, NANDFlashState),
357         VMSTATE_UINT32(cmd, NANDFlashState),
358         VMSTATE_UINT64(addr, NANDFlashState),
359         VMSTATE_INT32(addrlen, NANDFlashState),
360         VMSTATE_INT32(status, NANDFlashState),
361         VMSTATE_INT32(offset, NANDFlashState),
362         /* XXX: do we want to save s->storage too? */
363         VMSTATE_END_OF_LIST()
364     }
365 };
366 
367 static void nand_realize(DeviceState *dev, Error **errp)
368 {
369     int pagesize;
370     NANDFlashState *s = NAND(dev);
371     int ret;
372 
373 
374     s->buswidth = nand_flash_ids[s->chip_id].width >> 3;
375     s->size = nand_flash_ids[s->chip_id].size << 20;
376     if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
377         s->page_shift = 11;
378         s->erase_shift = 6;
379     } else {
380         s->page_shift = nand_flash_ids[s->chip_id].page_shift;
381         s->erase_shift = nand_flash_ids[s->chip_id].erase_shift;
382     }
383 
384     switch (1 << s->page_shift) {
385     case 256:
386         nand_init_256(s);
387         break;
388     case 512:
389         nand_init_512(s);
390         break;
391     case 2048:
392         nand_init_2048(s);
393         break;
394     default:
395         error_setg(errp, "Unsupported NAND block size %#x",
396                    1 << s->page_shift);
397         return;
398     }
399 
400     pagesize = 1 << s->oob_shift;
401     s->mem_oob = 1;
402     if (s->blk) {
403         if (!blk_supports_write_perm(s->blk)) {
404             error_setg(errp, "Can't use a read-only drive");
405             return;
406         }
407         ret = blk_set_perm(s->blk, BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE,
408                            BLK_PERM_ALL, errp);
409         if (ret < 0) {
410             return;
411         }
412         if (blk_getlength(s->blk) >=
413                 (s->pages << s->page_shift) + (s->pages << s->oob_shift)) {
414             pagesize = 0;
415             s->mem_oob = 0;
416         }
417     } else {
418         pagesize += 1 << s->page_shift;
419     }
420     if (pagesize) {
421         s->storage = (uint8_t *) memset(g_malloc(s->pages * pagesize),
422                         0xff, s->pages * pagesize);
423     }
424     /* Give s->ioaddr a sane value in case we save state before it is used. */
425     s->ioaddr = s->io;
426 }
427 
428 static Property nand_properties[] = {
429     DEFINE_PROP_UINT8("manufacturer_id", NANDFlashState, manf_id, 0),
430     DEFINE_PROP_UINT8("chip_id", NANDFlashState, chip_id, 0),
431     DEFINE_PROP_DRIVE("drive", NANDFlashState, blk),
432     DEFINE_PROP_END_OF_LIST(),
433 };
434 
435 static void nand_class_init(ObjectClass *klass, void *data)
436 {
437     DeviceClass *dc = DEVICE_CLASS(klass);
438 
439     dc->realize = nand_realize;
440     dc->reset = nand_reset;
441     dc->vmsd = &vmstate_nand;
442     device_class_set_props(dc, nand_properties);
443     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
444 }
445 
446 static const TypeInfo nand_info = {
447     .name          = TYPE_NAND,
448     .parent        = TYPE_DEVICE,
449     .instance_size = sizeof(NANDFlashState),
450     .class_init    = nand_class_init,
451 };
452 
453 static void nand_register_types(void)
454 {
455     type_register_static(&nand_info);
456 }
457 
458 /*
459  * Chip inputs are CLE, ALE, CE, WP, GND and eight I/O pins.  Chip
460  * outputs are R/B and eight I/O pins.
461  *
462  * CE, WP and R/B are active low.
463  */
464 void nand_setpins(DeviceState *dev, uint8_t cle, uint8_t ale,
465                   uint8_t ce, uint8_t wp, uint8_t gnd)
466 {
467     NANDFlashState *s = NAND(dev);
468 
469     s->cle = cle;
470     s->ale = ale;
471     s->ce = ce;
472     s->wp = wp;
473     s->gnd = gnd;
474     if (wp) {
475         s->status |= NAND_IOSTATUS_UNPROTCT;
476     } else {
477         s->status &= ~NAND_IOSTATUS_UNPROTCT;
478     }
479 }
480 
481 void nand_getpins(DeviceState *dev, int *rb)
482 {
483     *rb = 1;
484 }
485 
486 void nand_setio(DeviceState *dev, uint32_t value)
487 {
488     int i;
489     NANDFlashState *s = NAND(dev);
490 
491     if (!s->ce && s->cle) {
492         if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
493             if (s->cmd == NAND_CMD_READ0 && value == NAND_CMD_LPREAD2)
494                 return;
495             if (value == NAND_CMD_RANDOMREAD1) {
496                 s->addr &= ~((1 << s->addr_shift) - 1);
497                 s->addrlen = 0;
498                 return;
499             }
500         }
501         if (value == NAND_CMD_READ0) {
502             s->offset = 0;
503         } else if (value == NAND_CMD_READ1) {
504             s->offset = 0x100;
505             value = NAND_CMD_READ0;
506         } else if (value == NAND_CMD_READ2) {
507             s->offset = 1 << s->page_shift;
508             value = NAND_CMD_READ0;
509         }
510 
511         s->cmd = value;
512 
513         if (s->cmd == NAND_CMD_READSTATUS ||
514                 s->cmd == NAND_CMD_PAGEPROGRAM2 ||
515                 s->cmd == NAND_CMD_BLOCKERASE1 ||
516                 s->cmd == NAND_CMD_BLOCKERASE2 ||
517                 s->cmd == NAND_CMD_NOSERIALREAD2 ||
518                 s->cmd == NAND_CMD_RANDOMREAD2 ||
519                 s->cmd == NAND_CMD_RESET) {
520             nand_command(s);
521         }
522 
523         if (s->cmd != NAND_CMD_RANDOMREAD2) {
524             s->addrlen = 0;
525         }
526     }
527 
528     if (s->ale) {
529         unsigned int shift = s->addrlen * 8;
530         uint64_t mask = ~(0xffull << shift);
531         uint64_t v = (uint64_t)value << shift;
532 
533         s->addr = (s->addr & mask) | v;
534         s->addrlen ++;
535 
536         switch (s->addrlen) {
537         case 1:
538             if (s->cmd == NAND_CMD_READID) {
539                 nand_command(s);
540             }
541             break;
542         case 2: /* fix cache address as a byte address */
543             s->addr <<= (s->buswidth - 1);
544             break;
545         case 3:
546             if (!(nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
547                     (s->cmd == NAND_CMD_READ0 ||
548                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
549                 nand_command(s);
550             }
551             break;
552         case 4:
553             if ((nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
554                     nand_flash_ids[s->chip_id].size < 256 && /* 1Gb or less */
555                     (s->cmd == NAND_CMD_READ0 ||
556                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
557                 nand_command(s);
558             }
559             break;
560         case 5:
561             if ((nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
562                     nand_flash_ids[s->chip_id].size >= 256 && /* 2Gb or more */
563                     (s->cmd == NAND_CMD_READ0 ||
564                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
565                 nand_command(s);
566             }
567             break;
568         default:
569             break;
570         }
571     }
572 
573     if (!s->cle && !s->ale && s->cmd == NAND_CMD_PAGEPROGRAM1) {
574         if (s->iolen < (1 << s->page_shift) + (1 << s->oob_shift)) {
575             for (i = s->buswidth; i--; value >>= 8) {
576                 s->io[s->iolen ++] = (uint8_t) (value & 0xff);
577             }
578         }
579     } else if (!s->cle && !s->ale && s->cmd == NAND_CMD_COPYBACKPRG1) {
580         if ((s->addr & ((1 << s->addr_shift) - 1)) <
581                 (1 << s->page_shift) + (1 << s->oob_shift)) {
582             for (i = s->buswidth; i--; s->addr++, value >>= 8) {
583                 s->io[s->iolen + (s->addr & ((1 << s->addr_shift) - 1))] =
584                     (uint8_t) (value & 0xff);
585             }
586         }
587     }
588 }
589 
590 uint32_t nand_getio(DeviceState *dev)
591 {
592     int offset;
593     uint32_t x = 0;
594     NANDFlashState *s = NAND(dev);
595 
596     /* Allow sequential reading */
597     if (!s->iolen && s->cmd == NAND_CMD_READ0) {
598         offset = (int) (s->addr & ((1 << s->addr_shift) - 1)) + s->offset;
599         s->offset = 0;
600 
601         s->blk_load(s, s->addr, offset);
602         if (s->gnd)
603             s->iolen = (1 << s->page_shift) - offset;
604         else
605             s->iolen = (1 << s->page_shift) + (1 << s->oob_shift) - offset;
606     }
607 
608     if (s->ce || s->iolen <= 0) {
609         return 0;
610     }
611 
612     for (offset = s->buswidth; offset--;) {
613         x |= s->ioaddr[offset] << (offset << 3);
614     }
615     /* after receiving READ STATUS command all subsequent reads will
616      * return the status register value until another command is issued
617      */
618     if (s->cmd != NAND_CMD_READSTATUS) {
619         s->addr   += s->buswidth;
620         s->ioaddr += s->buswidth;
621         s->iolen  -= s->buswidth;
622     }
623     return x;
624 }
625 
626 uint32_t nand_getbuswidth(DeviceState *dev)
627 {
628     NANDFlashState *s = (NANDFlashState *) dev;
629     return s->buswidth << 3;
630 }
631 
632 DeviceState *nand_init(BlockBackend *blk, int manf_id, int chip_id)
633 {
634     DeviceState *dev;
635 
636     if (nand_flash_ids[chip_id].size == 0) {
637         hw_error("%s: Unsupported NAND chip ID.\n", __func__);
638     }
639     dev = qdev_new(TYPE_NAND);
640     qdev_prop_set_uint8(dev, "manufacturer_id", manf_id);
641     qdev_prop_set_uint8(dev, "chip_id", chip_id);
642     if (blk) {
643         qdev_prop_set_drive_err(dev, "drive", blk, &error_fatal);
644     }
645 
646     qdev_realize(dev, NULL, &error_fatal);
647     return dev;
648 }
649 
650 type_init(nand_register_types)
651 
652 #else
653 
654 /* Program a single page */
655 static void glue(nand_blk_write_, NAND_PAGE_SIZE)(NANDFlashState *s)
656 {
657     uint64_t off, page, sector, soff;
658     uint8_t iobuf[(PAGE_SECTORS + 2) * 0x200];
659     if (PAGE(s->addr) >= s->pages)
660         return;
661 
662     if (!s->blk) {
663         mem_and(s->storage + PAGE_START(s->addr) + (s->addr & PAGE_MASK) +
664                         s->offset, s->io, s->iolen);
665     } else if (s->mem_oob) {
666         sector = SECTOR(s->addr);
667         off = (s->addr & PAGE_MASK) + s->offset;
668         soff = SECTOR_OFFSET(s->addr);
669         if (blk_pread(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
670                       PAGE_SECTORS << BDRV_SECTOR_BITS) < 0) {
671             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
672             return;
673         }
674 
675         mem_and(iobuf + (soff | off), s->io, MIN(s->iolen, NAND_PAGE_SIZE - off));
676         if (off + s->iolen > NAND_PAGE_SIZE) {
677             page = PAGE(s->addr);
678             mem_and(s->storage + (page << OOB_SHIFT), s->io + NAND_PAGE_SIZE - off,
679                             MIN(OOB_SIZE, off + s->iolen - NAND_PAGE_SIZE));
680         }
681 
682         if (blk_pwrite(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
683                        PAGE_SECTORS << BDRV_SECTOR_BITS, 0) < 0) {
684             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
685         }
686     } else {
687         off = PAGE_START(s->addr) + (s->addr & PAGE_MASK) + s->offset;
688         sector = off >> 9;
689         soff = off & 0x1ff;
690         if (blk_pread(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
691                       (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS) < 0) {
692             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
693             return;
694         }
695 
696         mem_and(iobuf + soff, s->io, s->iolen);
697 
698         if (blk_pwrite(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
699                        (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS, 0) < 0) {
700             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
701         }
702     }
703     s->offset = 0;
704 }
705 
706 /* Erase a single block */
707 static void glue(nand_blk_erase_, NAND_PAGE_SIZE)(NANDFlashState *s)
708 {
709     uint64_t i, page, addr;
710     uint8_t iobuf[0x200] = { [0 ... 0x1ff] = 0xff, };
711     addr = s->addr & ~((1 << (ADDR_SHIFT + s->erase_shift)) - 1);
712 
713     if (PAGE(addr) >= s->pages) {
714         return;
715     }
716 
717     if (!s->blk) {
718         memset(s->storage + PAGE_START(addr),
719                         0xff, (NAND_PAGE_SIZE + OOB_SIZE) << s->erase_shift);
720     } else if (s->mem_oob) {
721         memset(s->storage + (PAGE(addr) << OOB_SHIFT),
722                         0xff, OOB_SIZE << s->erase_shift);
723         i = SECTOR(addr);
724         page = SECTOR(addr + (1 << (ADDR_SHIFT + s->erase_shift)));
725         for (; i < page; i ++)
726             if (blk_pwrite(s->blk, i << BDRV_SECTOR_BITS, iobuf,
727                            BDRV_SECTOR_SIZE, 0) < 0) {
728                 printf("%s: write error in sector %" PRIu64 "\n", __func__, i);
729             }
730     } else {
731         addr = PAGE_START(addr);
732         page = addr >> 9;
733         if (blk_pread(s->blk, page << BDRV_SECTOR_BITS, iobuf,
734                       BDRV_SECTOR_SIZE) < 0) {
735             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
736         }
737         memset(iobuf + (addr & 0x1ff), 0xff, (~addr & 0x1ff) + 1);
738         if (blk_pwrite(s->blk, page << BDRV_SECTOR_BITS, iobuf,
739                        BDRV_SECTOR_SIZE, 0) < 0) {
740             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
741         }
742 
743         memset(iobuf, 0xff, 0x200);
744         i = (addr & ~0x1ff) + 0x200;
745         for (addr += ((NAND_PAGE_SIZE + OOB_SIZE) << s->erase_shift) - 0x200;
746                         i < addr; i += 0x200) {
747             if (blk_pwrite(s->blk, i, iobuf, BDRV_SECTOR_SIZE, 0) < 0) {
748                 printf("%s: write error in sector %" PRIu64 "\n",
749                        __func__, i >> 9);
750             }
751         }
752 
753         page = i >> 9;
754         if (blk_pread(s->blk, page << BDRV_SECTOR_BITS, iobuf,
755                       BDRV_SECTOR_SIZE) < 0) {
756             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
757         }
758         memset(iobuf, 0xff, ((addr - 1) & 0x1ff) + 1);
759         if (blk_pwrite(s->blk, page << BDRV_SECTOR_BITS, iobuf,
760                        BDRV_SECTOR_SIZE, 0) < 0) {
761             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
762         }
763     }
764 }
765 
766 static void glue(nand_blk_load_, NAND_PAGE_SIZE)(NANDFlashState *s,
767                 uint64_t addr, int offset)
768 {
769     if (PAGE(addr) >= s->pages) {
770         return;
771     }
772 
773     if (s->blk) {
774         if (s->mem_oob) {
775             if (blk_pread(s->blk, SECTOR(addr) << BDRV_SECTOR_BITS, s->io,
776                           PAGE_SECTORS << BDRV_SECTOR_BITS) < 0) {
777                 printf("%s: read error in sector %" PRIu64 "\n",
778                                 __func__, SECTOR(addr));
779             }
780             memcpy(s->io + SECTOR_OFFSET(s->addr) + NAND_PAGE_SIZE,
781                             s->storage + (PAGE(s->addr) << OOB_SHIFT),
782                             OOB_SIZE);
783             s->ioaddr = s->io + SECTOR_OFFSET(s->addr) + offset;
784         } else {
785             if (blk_pread(s->blk, PAGE_START(addr), s->io,
786                           (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS) < 0) {
787                 printf("%s: read error in sector %" PRIu64 "\n",
788                                 __func__, PAGE_START(addr) >> 9);
789             }
790             s->ioaddr = s->io + (PAGE_START(addr) & 0x1ff) + offset;
791         }
792     } else {
793         memcpy(s->io, s->storage + PAGE_START(s->addr) +
794                         offset, NAND_PAGE_SIZE + OOB_SIZE - offset);
795         s->ioaddr = s->io;
796     }
797 }
798 
799 static void glue(nand_init_, NAND_PAGE_SIZE)(NANDFlashState *s)
800 {
801     s->oob_shift = PAGE_SHIFT - 5;
802     s->pages = s->size >> PAGE_SHIFT;
803     s->addr_shift = ADDR_SHIFT;
804 
805     s->blk_erase = glue(nand_blk_erase_, NAND_PAGE_SIZE);
806     s->blk_write = glue(nand_blk_write_, NAND_PAGE_SIZE);
807     s->blk_load = glue(nand_blk_load_, NAND_PAGE_SIZE);
808 }
809 
810 # undef NAND_PAGE_SIZE
811 # undef PAGE_SHIFT
812 # undef PAGE_SECTORS
813 # undef ADDR_SHIFT
814 #endif	/* NAND_IO */
815