1 /* 2 * ST M25P80 emulator. Emulate all SPI flash devices based on the m25p80 command 3 * set. Known devices table current as of Jun/2012 and taken from linux. 4 * See drivers/mtd/devices/m25p80.c. 5 * 6 * Copyright (C) 2011 Edgar E. Iglesias <edgar.iglesias@gmail.com> 7 * Copyright (C) 2012 Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> 8 * Copyright (C) 2012 PetaLogix 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 or 13 * (at your option) a later version of the License. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License along 21 * with this program; if not, see <http://www.gnu.org/licenses/>. 22 */ 23 24 #include "qemu/osdep.h" 25 #include "hw/hw.h" 26 #include "sysemu/block-backend.h" 27 #include "sysemu/blockdev.h" 28 #include "hw/ssi/ssi.h" 29 #include "qemu/bitops.h" 30 #include "qemu/log.h" 31 #include "qemu/error-report.h" 32 #include "qapi/error.h" 33 34 #ifndef M25P80_ERR_DEBUG 35 #define M25P80_ERR_DEBUG 0 36 #endif 37 38 #define DB_PRINT_L(level, ...) do { \ 39 if (M25P80_ERR_DEBUG > (level)) { \ 40 fprintf(stderr, ": %s: ", __func__); \ 41 fprintf(stderr, ## __VA_ARGS__); \ 42 } \ 43 } while (0); 44 45 /* Fields for FlashPartInfo->flags */ 46 47 /* erase capabilities */ 48 #define ER_4K 1 49 #define ER_32K 2 50 /* set to allow the page program command to write 0s back to 1. Useful for 51 * modelling EEPROM with SPI flash command set 52 */ 53 #define EEPROM 0x100 54 55 /* 16 MiB max in 3 byte address mode */ 56 #define MAX_3BYTES_SIZE 0x1000000 57 58 #define SPI_NOR_MAX_ID_LEN 6 59 60 typedef struct FlashPartInfo { 61 const char *part_name; 62 /* 63 * This array stores the ID bytes. 64 * The first three bytes are the JEDIC ID. 65 * JEDEC ID zero means "no ID" (mostly older chips). 66 */ 67 uint8_t id[SPI_NOR_MAX_ID_LEN]; 68 uint8_t id_len; 69 /* there is confusion between manufacturers as to what a sector is. In this 70 * device model, a "sector" is the size that is erased by the ERASE_SECTOR 71 * command (opcode 0xd8). 72 */ 73 uint32_t sector_size; 74 uint32_t n_sectors; 75 uint32_t page_size; 76 uint16_t flags; 77 /* 78 * Big sized spi nor are often stacked devices, thus sometime 79 * replace chip erase with die erase. 80 * This field inform how many die is in the chip. 81 */ 82 uint8_t die_cnt; 83 } FlashPartInfo; 84 85 /* adapted from linux */ 86 /* Used when the "_ext_id" is two bytes at most */ 87 #define INFO(_part_name, _jedec_id, _ext_id, _sector_size, _n_sectors, _flags)\ 88 .part_name = _part_name,\ 89 .id = {\ 90 ((_jedec_id) >> 16) & 0xff,\ 91 ((_jedec_id) >> 8) & 0xff,\ 92 (_jedec_id) & 0xff,\ 93 ((_ext_id) >> 8) & 0xff,\ 94 (_ext_id) & 0xff,\ 95 },\ 96 .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),\ 97 .sector_size = (_sector_size),\ 98 .n_sectors = (_n_sectors),\ 99 .page_size = 256,\ 100 .flags = (_flags),\ 101 .die_cnt = 0 102 103 #define INFO6(_part_name, _jedec_id, _ext_id, _sector_size, _n_sectors, _flags)\ 104 .part_name = _part_name,\ 105 .id = {\ 106 ((_jedec_id) >> 16) & 0xff,\ 107 ((_jedec_id) >> 8) & 0xff,\ 108 (_jedec_id) & 0xff,\ 109 ((_ext_id) >> 16) & 0xff,\ 110 ((_ext_id) >> 8) & 0xff,\ 111 (_ext_id) & 0xff,\ 112 },\ 113 .id_len = 6,\ 114 .sector_size = (_sector_size),\ 115 .n_sectors = (_n_sectors),\ 116 .page_size = 256,\ 117 .flags = (_flags),\ 118 .die_cnt = 0 119 120 #define INFO_STACKED(_part_name, _jedec_id, _ext_id, _sector_size, _n_sectors,\ 121 _flags, _die_cnt)\ 122 .part_name = _part_name,\ 123 .id = {\ 124 ((_jedec_id) >> 16) & 0xff,\ 125 ((_jedec_id) >> 8) & 0xff,\ 126 (_jedec_id) & 0xff,\ 127 ((_ext_id) >> 8) & 0xff,\ 128 (_ext_id) & 0xff,\ 129 },\ 130 .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),\ 131 .sector_size = (_sector_size),\ 132 .n_sectors = (_n_sectors),\ 133 .page_size = 256,\ 134 .flags = (_flags),\ 135 .die_cnt = _die_cnt 136 137 #define JEDEC_NUMONYX 0x20 138 #define JEDEC_WINBOND 0xEF 139 #define JEDEC_SPANSION 0x01 140 141 /* Numonyx (Micron) Configuration register macros */ 142 #define VCFG_DUMMY 0x1 143 #define VCFG_WRAP_SEQUENTIAL 0x2 144 #define NVCFG_XIP_MODE_DISABLED (7 << 9) 145 #define NVCFG_XIP_MODE_MASK (7 << 9) 146 #define VCFG_XIP_MODE_ENABLED (1 << 3) 147 #define CFG_DUMMY_CLK_LEN 4 148 #define NVCFG_DUMMY_CLK_POS 12 149 #define VCFG_DUMMY_CLK_POS 4 150 #define EVCFG_OUT_DRIVER_STRENGTH_DEF 7 151 #define EVCFG_VPP_ACCELERATOR (1 << 3) 152 #define EVCFG_RESET_HOLD_ENABLED (1 << 4) 153 #define NVCFG_DUAL_IO_MASK (1 << 2) 154 #define EVCFG_DUAL_IO_ENABLED (1 << 6) 155 #define NVCFG_QUAD_IO_MASK (1 << 3) 156 #define EVCFG_QUAD_IO_ENABLED (1 << 7) 157 #define NVCFG_4BYTE_ADDR_MASK (1 << 0) 158 #define NVCFG_LOWER_SEGMENT_MASK (1 << 1) 159 160 /* Numonyx (Micron) Flag Status Register macros */ 161 #define FSR_4BYTE_ADDR_MODE_ENABLED 0x1 162 #define FSR_FLASH_READY (1 << 7) 163 164 /* Spansion configuration registers macros. */ 165 #define SPANSION_QUAD_CFG_POS 0 166 #define SPANSION_QUAD_CFG_LEN 1 167 #define SPANSION_DUMMY_CLK_POS 0 168 #define SPANSION_DUMMY_CLK_LEN 4 169 #define SPANSION_ADDR_LEN_POS 7 170 #define SPANSION_ADDR_LEN_LEN 1 171 172 /* 173 * Spansion read mode command length in bytes, 174 * the mode is currently not supported. 175 */ 176 177 #define SPANSION_CONTINUOUS_READ_MODE_CMD_LEN 1 178 #define WINBOND_CONTINUOUS_READ_MODE_CMD_LEN 1 179 180 static const FlashPartInfo known_devices[] = { 181 /* Atmel -- some are (confusingly) marketed as "DataFlash" */ 182 { INFO("at25fs010", 0x1f6601, 0, 32 << 10, 4, ER_4K) }, 183 { INFO("at25fs040", 0x1f6604, 0, 64 << 10, 8, ER_4K) }, 184 185 { INFO("at25df041a", 0x1f4401, 0, 64 << 10, 8, ER_4K) }, 186 { INFO("at25df321a", 0x1f4701, 0, 64 << 10, 64, ER_4K) }, 187 { INFO("at25df641", 0x1f4800, 0, 64 << 10, 128, ER_4K) }, 188 189 { INFO("at26f004", 0x1f0400, 0, 64 << 10, 8, ER_4K) }, 190 { INFO("at26df081a", 0x1f4501, 0, 64 << 10, 16, ER_4K) }, 191 { INFO("at26df161a", 0x1f4601, 0, 64 << 10, 32, ER_4K) }, 192 { INFO("at26df321", 0x1f4700, 0, 64 << 10, 64, ER_4K) }, 193 194 { INFO("at45db081d", 0x1f2500, 0, 64 << 10, 16, ER_4K) }, 195 196 /* Atmel EEPROMS - it is assumed, that don't care bit in command 197 * is set to 0. Block protection is not supported. 198 */ 199 { INFO("at25128a-nonjedec", 0x0, 0, 1, 131072, EEPROM) }, 200 { INFO("at25256a-nonjedec", 0x0, 0, 1, 262144, EEPROM) }, 201 202 /* EON -- en25xxx */ 203 { INFO("en25f32", 0x1c3116, 0, 64 << 10, 64, ER_4K) }, 204 { INFO("en25p32", 0x1c2016, 0, 64 << 10, 64, 0) }, 205 { INFO("en25q32b", 0x1c3016, 0, 64 << 10, 64, 0) }, 206 { INFO("en25p64", 0x1c2017, 0, 64 << 10, 128, 0) }, 207 { INFO("en25q64", 0x1c3017, 0, 64 << 10, 128, ER_4K) }, 208 209 /* GigaDevice */ 210 { INFO("gd25q32", 0xc84016, 0, 64 << 10, 64, ER_4K) }, 211 { INFO("gd25q64", 0xc84017, 0, 64 << 10, 128, ER_4K) }, 212 213 /* Intel/Numonyx -- xxxs33b */ 214 { INFO("160s33b", 0x898911, 0, 64 << 10, 32, 0) }, 215 { INFO("320s33b", 0x898912, 0, 64 << 10, 64, 0) }, 216 { INFO("640s33b", 0x898913, 0, 64 << 10, 128, 0) }, 217 { INFO("n25q064", 0x20ba17, 0, 64 << 10, 128, 0) }, 218 219 /* Macronix */ 220 { INFO("mx25l2005a", 0xc22012, 0, 64 << 10, 4, ER_4K) }, 221 { INFO("mx25l4005a", 0xc22013, 0, 64 << 10, 8, ER_4K) }, 222 { INFO("mx25l8005", 0xc22014, 0, 64 << 10, 16, 0) }, 223 { INFO("mx25l1606e", 0xc22015, 0, 64 << 10, 32, ER_4K) }, 224 { INFO("mx25l3205d", 0xc22016, 0, 64 << 10, 64, 0) }, 225 { INFO("mx25l6405d", 0xc22017, 0, 64 << 10, 128, 0) }, 226 { INFO("mx25l12805d", 0xc22018, 0, 64 << 10, 256, 0) }, 227 { INFO("mx25l12855e", 0xc22618, 0, 64 << 10, 256, 0) }, 228 { INFO("mx25l25635e", 0xc22019, 0, 64 << 10, 512, 0) }, 229 { INFO("mx25l25655e", 0xc22619, 0, 64 << 10, 512, 0) }, 230 { INFO("mx66u51235f", 0xc2253a, 0, 64 << 10, 1024, ER_4K | ER_32K) }, 231 { INFO("mx66u1g45g", 0xc2253b, 0, 64 << 10, 2048, ER_4K | ER_32K) }, 232 { INFO("mx66l1g45g", 0xc2201b, 0, 64 << 10, 2048, ER_4K | ER_32K) }, 233 234 /* Micron */ 235 { INFO("n25q032a11", 0x20bb16, 0, 64 << 10, 64, ER_4K) }, 236 { INFO("n25q032a13", 0x20ba16, 0, 64 << 10, 64, ER_4K) }, 237 { INFO("n25q064a11", 0x20bb17, 0, 64 << 10, 128, ER_4K) }, 238 { INFO("n25q064a13", 0x20ba17, 0, 64 << 10, 128, ER_4K) }, 239 { INFO("n25q128a11", 0x20bb18, 0, 64 << 10, 256, ER_4K) }, 240 { INFO("n25q128a13", 0x20ba18, 0, 64 << 10, 256, ER_4K) }, 241 { INFO("n25q256a11", 0x20bb19, 0, 64 << 10, 512, ER_4K) }, 242 { INFO("n25q256a13", 0x20ba19, 0, 64 << 10, 512, ER_4K) }, 243 { INFO("n25q128", 0x20ba18, 0, 64 << 10, 256, 0) }, 244 { INFO("n25q256a", 0x20ba19, 0, 64 << 10, 512, ER_4K) }, 245 { INFO("n25q512a", 0x20ba20, 0, 64 << 10, 1024, ER_4K) }, 246 { INFO_STACKED("n25q00", 0x20ba21, 0x1000, 64 << 10, 2048, ER_4K, 4) }, 247 { INFO_STACKED("n25q00a", 0x20bb21, 0x1000, 64 << 10, 2048, ER_4K, 4) }, 248 { INFO_STACKED("mt25ql01g", 0x20ba21, 0x1040, 64 << 10, 2048, ER_4K, 2) }, 249 { INFO_STACKED("mt25qu01g", 0x20bb21, 0x1040, 64 << 10, 2048, ER_4K, 2) }, 250 251 /* Spansion -- single (large) sector size only, at least 252 * for the chips listed here (without boot sectors). 253 */ 254 { INFO("s25sl032p", 0x010215, 0x4d00, 64 << 10, 64, ER_4K) }, 255 { INFO("s25sl064p", 0x010216, 0x4d00, 64 << 10, 128, ER_4K) }, 256 { INFO("s25fl256s0", 0x010219, 0x4d00, 256 << 10, 128, 0) }, 257 { INFO("s25fl256s1", 0x010219, 0x4d01, 64 << 10, 512, 0) }, 258 { INFO6("s25fl512s", 0x010220, 0x4d0080, 256 << 10, 256, 0) }, 259 { INFO6("s70fl01gs", 0x010221, 0x4d0080, 256 << 10, 512, 0) }, 260 { INFO("s25sl12800", 0x012018, 0x0300, 256 << 10, 64, 0) }, 261 { INFO("s25sl12801", 0x012018, 0x0301, 64 << 10, 256, 0) }, 262 { INFO("s25fl129p0", 0x012018, 0x4d00, 256 << 10, 64, 0) }, 263 { INFO("s25fl129p1", 0x012018, 0x4d01, 64 << 10, 256, 0) }, 264 { INFO("s25sl004a", 0x010212, 0, 64 << 10, 8, 0) }, 265 { INFO("s25sl008a", 0x010213, 0, 64 << 10, 16, 0) }, 266 { INFO("s25sl016a", 0x010214, 0, 64 << 10, 32, 0) }, 267 { INFO("s25sl032a", 0x010215, 0, 64 << 10, 64, 0) }, 268 { INFO("s25sl064a", 0x010216, 0, 64 << 10, 128, 0) }, 269 { INFO("s25fl016k", 0xef4015, 0, 64 << 10, 32, ER_4K | ER_32K) }, 270 { INFO("s25fl064k", 0xef4017, 0, 64 << 10, 128, ER_4K | ER_32K) }, 271 272 /* Spansion -- boot sectors support */ 273 { INFO6("s25fs512s", 0x010220, 0x4d0081, 256 << 10, 256, 0) }, 274 { INFO6("s70fs01gs", 0x010221, 0x4d0081, 256 << 10, 512, 0) }, 275 276 /* SST -- large erase sizes are "overlays", "sectors" are 4<< 10 */ 277 { INFO("sst25vf040b", 0xbf258d, 0, 64 << 10, 8, ER_4K) }, 278 { INFO("sst25vf080b", 0xbf258e, 0, 64 << 10, 16, ER_4K) }, 279 { INFO("sst25vf016b", 0xbf2541, 0, 64 << 10, 32, ER_4K) }, 280 { INFO("sst25vf032b", 0xbf254a, 0, 64 << 10, 64, ER_4K) }, 281 { INFO("sst25wf512", 0xbf2501, 0, 64 << 10, 1, ER_4K) }, 282 { INFO("sst25wf010", 0xbf2502, 0, 64 << 10, 2, ER_4K) }, 283 { INFO("sst25wf020", 0xbf2503, 0, 64 << 10, 4, ER_4K) }, 284 { INFO("sst25wf040", 0xbf2504, 0, 64 << 10, 8, ER_4K) }, 285 { INFO("sst25wf080", 0xbf2505, 0, 64 << 10, 16, ER_4K) }, 286 287 /* ST Microelectronics -- newer production may have feature updates */ 288 { INFO("m25p05", 0x202010, 0, 32 << 10, 2, 0) }, 289 { INFO("m25p10", 0x202011, 0, 32 << 10, 4, 0) }, 290 { INFO("m25p20", 0x202012, 0, 64 << 10, 4, 0) }, 291 { INFO("m25p40", 0x202013, 0, 64 << 10, 8, 0) }, 292 { INFO("m25p80", 0x202014, 0, 64 << 10, 16, 0) }, 293 { INFO("m25p16", 0x202015, 0, 64 << 10, 32, 0) }, 294 { INFO("m25p32", 0x202016, 0, 64 << 10, 64, 0) }, 295 { INFO("m25p64", 0x202017, 0, 64 << 10, 128, 0) }, 296 { INFO("m25p128", 0x202018, 0, 256 << 10, 64, 0) }, 297 { INFO("n25q032", 0x20ba16, 0, 64 << 10, 64, 0) }, 298 299 { INFO("m45pe10", 0x204011, 0, 64 << 10, 2, 0) }, 300 { INFO("m45pe80", 0x204014, 0, 64 << 10, 16, 0) }, 301 { INFO("m45pe16", 0x204015, 0, 64 << 10, 32, 0) }, 302 303 { INFO("m25pe20", 0x208012, 0, 64 << 10, 4, 0) }, 304 { INFO("m25pe80", 0x208014, 0, 64 << 10, 16, 0) }, 305 { INFO("m25pe16", 0x208015, 0, 64 << 10, 32, ER_4K) }, 306 307 { INFO("m25px32", 0x207116, 0, 64 << 10, 64, ER_4K) }, 308 { INFO("m25px32-s0", 0x207316, 0, 64 << 10, 64, ER_4K) }, 309 { INFO("m25px32-s1", 0x206316, 0, 64 << 10, 64, ER_4K) }, 310 { INFO("m25px64", 0x207117, 0, 64 << 10, 128, 0) }, 311 312 /* Winbond -- w25x "blocks" are 64k, "sectors" are 4KiB */ 313 { INFO("w25x10", 0xef3011, 0, 64 << 10, 2, ER_4K) }, 314 { INFO("w25x20", 0xef3012, 0, 64 << 10, 4, ER_4K) }, 315 { INFO("w25x40", 0xef3013, 0, 64 << 10, 8, ER_4K) }, 316 { INFO("w25x80", 0xef3014, 0, 64 << 10, 16, ER_4K) }, 317 { INFO("w25x16", 0xef3015, 0, 64 << 10, 32, ER_4K) }, 318 { INFO("w25x32", 0xef3016, 0, 64 << 10, 64, ER_4K) }, 319 { INFO("w25q32", 0xef4016, 0, 64 << 10, 64, ER_4K) }, 320 { INFO("w25q32dw", 0xef6016, 0, 64 << 10, 64, ER_4K) }, 321 { INFO("w25x64", 0xef3017, 0, 64 << 10, 128, ER_4K) }, 322 { INFO("w25q64", 0xef4017, 0, 64 << 10, 128, ER_4K) }, 323 { INFO("w25q80", 0xef5014, 0, 64 << 10, 16, ER_4K) }, 324 { INFO("w25q80bl", 0xef4014, 0, 64 << 10, 16, ER_4K) }, 325 { INFO("w25q256", 0xef4019, 0, 64 << 10, 512, ER_4K) }, 326 }; 327 328 typedef enum { 329 NOP = 0, 330 WRSR = 0x1, 331 WRDI = 0x4, 332 RDSR = 0x5, 333 WREN = 0x6, 334 JEDEC_READ = 0x9f, 335 BULK_ERASE = 0xc7, 336 READ_FSR = 0x70, 337 RDCR = 0x15, 338 339 READ = 0x03, 340 READ4 = 0x13, 341 FAST_READ = 0x0b, 342 FAST_READ4 = 0x0c, 343 DOR = 0x3b, 344 DOR4 = 0x3c, 345 QOR = 0x6b, 346 QOR4 = 0x6c, 347 DIOR = 0xbb, 348 DIOR4 = 0xbc, 349 QIOR = 0xeb, 350 QIOR4 = 0xec, 351 352 PP = 0x02, 353 PP4 = 0x12, 354 PP4_4 = 0x3e, 355 DPP = 0xa2, 356 QPP = 0x32, 357 QPP_4 = 0x34, 358 359 ERASE_4K = 0x20, 360 ERASE4_4K = 0x21, 361 ERASE_32K = 0x52, 362 ERASE4_32K = 0x5c, 363 ERASE_SECTOR = 0xd8, 364 ERASE4_SECTOR = 0xdc, 365 366 EN_4BYTE_ADDR = 0xB7, 367 EX_4BYTE_ADDR = 0xE9, 368 369 EXTEND_ADDR_READ = 0xC8, 370 EXTEND_ADDR_WRITE = 0xC5, 371 372 RESET_ENABLE = 0x66, 373 RESET_MEMORY = 0x99, 374 375 /* 376 * Micron: 0x35 - enable QPI 377 * Spansion: 0x35 - read control register 378 */ 379 RDCR_EQIO = 0x35, 380 RSTQIO = 0xf5, 381 382 RNVCR = 0xB5, 383 WNVCR = 0xB1, 384 385 RVCR = 0x85, 386 WVCR = 0x81, 387 388 REVCR = 0x65, 389 WEVCR = 0x61, 390 391 DIE_ERASE = 0xC4, 392 } FlashCMD; 393 394 typedef enum { 395 STATE_IDLE, 396 STATE_PAGE_PROGRAM, 397 STATE_READ, 398 STATE_COLLECTING_DATA, 399 STATE_COLLECTING_VAR_LEN_DATA, 400 STATE_READING_DATA, 401 } CMDState; 402 403 typedef enum { 404 MAN_SPANSION, 405 MAN_MACRONIX, 406 MAN_NUMONYX, 407 MAN_WINBOND, 408 MAN_GENERIC, 409 } Manufacturer; 410 411 #define M25P80_INTERNAL_DATA_BUFFER_SZ 16 412 413 typedef struct Flash { 414 SSISlave parent_obj; 415 416 BlockBackend *blk; 417 418 uint8_t *storage; 419 uint32_t size; 420 int page_size; 421 422 uint8_t state; 423 uint8_t data[M25P80_INTERNAL_DATA_BUFFER_SZ]; 424 uint32_t len; 425 uint32_t pos; 426 uint8_t needed_bytes; 427 uint8_t cmd_in_progress; 428 uint32_t cur_addr; 429 uint32_t nonvolatile_cfg; 430 /* Configuration register for Macronix */ 431 uint32_t volatile_cfg; 432 uint32_t enh_volatile_cfg; 433 /* Spansion cfg registers. */ 434 uint8_t spansion_cr1nv; 435 uint8_t spansion_cr2nv; 436 uint8_t spansion_cr3nv; 437 uint8_t spansion_cr4nv; 438 uint8_t spansion_cr1v; 439 uint8_t spansion_cr2v; 440 uint8_t spansion_cr3v; 441 uint8_t spansion_cr4v; 442 bool write_enable; 443 bool four_bytes_address_mode; 444 bool reset_enable; 445 bool quad_enable; 446 uint8_t ear; 447 448 int64_t dirty_page; 449 450 const FlashPartInfo *pi; 451 452 } Flash; 453 454 typedef struct M25P80Class { 455 SSISlaveClass parent_class; 456 FlashPartInfo *pi; 457 } M25P80Class; 458 459 #define TYPE_M25P80 "m25p80-generic" 460 #define M25P80(obj) \ 461 OBJECT_CHECK(Flash, (obj), TYPE_M25P80) 462 #define M25P80_CLASS(klass) \ 463 OBJECT_CLASS_CHECK(M25P80Class, (klass), TYPE_M25P80) 464 #define M25P80_GET_CLASS(obj) \ 465 OBJECT_GET_CLASS(M25P80Class, (obj), TYPE_M25P80) 466 467 static inline Manufacturer get_man(Flash *s) 468 { 469 switch (s->pi->id[0]) { 470 case 0x20: 471 return MAN_NUMONYX; 472 case 0xEF: 473 return MAN_WINBOND; 474 case 0x01: 475 return MAN_SPANSION; 476 case 0xC2: 477 return MAN_MACRONIX; 478 default: 479 return MAN_GENERIC; 480 } 481 } 482 483 static void blk_sync_complete(void *opaque, int ret) 484 { 485 QEMUIOVector *iov = opaque; 486 487 qemu_iovec_destroy(iov); 488 g_free(iov); 489 490 /* do nothing. Masters do not directly interact with the backing store, 491 * only the working copy so no mutexing required. 492 */ 493 } 494 495 static void flash_sync_page(Flash *s, int page) 496 { 497 QEMUIOVector *iov; 498 499 if (!s->blk || blk_is_read_only(s->blk)) { 500 return; 501 } 502 503 iov = g_new(QEMUIOVector, 1); 504 qemu_iovec_init(iov, 1); 505 qemu_iovec_add(iov, s->storage + page * s->pi->page_size, 506 s->pi->page_size); 507 blk_aio_pwritev(s->blk, page * s->pi->page_size, iov, 0, 508 blk_sync_complete, iov); 509 } 510 511 static inline void flash_sync_area(Flash *s, int64_t off, int64_t len) 512 { 513 QEMUIOVector *iov; 514 515 if (!s->blk || blk_is_read_only(s->blk)) { 516 return; 517 } 518 519 assert(!(len % BDRV_SECTOR_SIZE)); 520 iov = g_new(QEMUIOVector, 1); 521 qemu_iovec_init(iov, 1); 522 qemu_iovec_add(iov, s->storage + off, len); 523 blk_aio_pwritev(s->blk, off, iov, 0, blk_sync_complete, iov); 524 } 525 526 static void flash_erase(Flash *s, int offset, FlashCMD cmd) 527 { 528 uint32_t len; 529 uint8_t capa_to_assert = 0; 530 531 switch (cmd) { 532 case ERASE_4K: 533 case ERASE4_4K: 534 len = 4 << 10; 535 capa_to_assert = ER_4K; 536 break; 537 case ERASE_32K: 538 case ERASE4_32K: 539 len = 32 << 10; 540 capa_to_assert = ER_32K; 541 break; 542 case ERASE_SECTOR: 543 case ERASE4_SECTOR: 544 len = s->pi->sector_size; 545 break; 546 case BULK_ERASE: 547 len = s->size; 548 break; 549 case DIE_ERASE: 550 if (s->pi->die_cnt) { 551 len = s->size / s->pi->die_cnt; 552 offset = offset & (~(len - 1)); 553 } else { 554 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: die erase is not supported" 555 " by device\n"); 556 return; 557 } 558 break; 559 default: 560 abort(); 561 } 562 563 DB_PRINT_L(0, "offset = %#x, len = %d\n", offset, len); 564 if ((s->pi->flags & capa_to_assert) != capa_to_assert) { 565 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: %d erase size not supported by" 566 " device\n", len); 567 } 568 569 if (!s->write_enable) { 570 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: erase with write protect!\n"); 571 return; 572 } 573 memset(s->storage + offset, 0xff, len); 574 flash_sync_area(s, offset, len); 575 } 576 577 static inline void flash_sync_dirty(Flash *s, int64_t newpage) 578 { 579 if (s->dirty_page >= 0 && s->dirty_page != newpage) { 580 flash_sync_page(s, s->dirty_page); 581 s->dirty_page = newpage; 582 } 583 } 584 585 static inline 586 void flash_write8(Flash *s, uint32_t addr, uint8_t data) 587 { 588 uint32_t page = addr / s->pi->page_size; 589 uint8_t prev = s->storage[s->cur_addr]; 590 591 if (!s->write_enable) { 592 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: write with write protect!\n"); 593 } 594 595 if ((prev ^ data) & data) { 596 DB_PRINT_L(1, "programming zero to one! addr=%" PRIx32 " %" PRIx8 597 " -> %" PRIx8 "\n", addr, prev, data); 598 } 599 600 if (s->pi->flags & EEPROM) { 601 s->storage[s->cur_addr] = data; 602 } else { 603 s->storage[s->cur_addr] &= data; 604 } 605 606 flash_sync_dirty(s, page); 607 s->dirty_page = page; 608 } 609 610 static inline int get_addr_length(Flash *s) 611 { 612 /* check if eeprom is in use */ 613 if (s->pi->flags == EEPROM) { 614 return 2; 615 } 616 617 switch (s->cmd_in_progress) { 618 case PP4: 619 case PP4_4: 620 case QPP_4: 621 case READ4: 622 case QIOR4: 623 case ERASE4_4K: 624 case ERASE4_32K: 625 case ERASE4_SECTOR: 626 case FAST_READ4: 627 case DOR4: 628 case QOR4: 629 case DIOR4: 630 return 4; 631 default: 632 return s->four_bytes_address_mode ? 4 : 3; 633 } 634 } 635 636 static void complete_collecting_data(Flash *s) 637 { 638 int i, n; 639 640 n = get_addr_length(s); 641 s->cur_addr = (n == 3 ? s->ear : 0); 642 for (i = 0; i < n; ++i) { 643 s->cur_addr <<= 8; 644 s->cur_addr |= s->data[i]; 645 } 646 647 s->cur_addr &= s->size - 1; 648 649 s->state = STATE_IDLE; 650 651 switch (s->cmd_in_progress) { 652 case DPP: 653 case QPP: 654 case QPP_4: 655 case PP: 656 case PP4: 657 case PP4_4: 658 s->state = STATE_PAGE_PROGRAM; 659 break; 660 case READ: 661 case READ4: 662 case FAST_READ: 663 case FAST_READ4: 664 case DOR: 665 case DOR4: 666 case QOR: 667 case QOR4: 668 case DIOR: 669 case DIOR4: 670 case QIOR: 671 case QIOR4: 672 s->state = STATE_READ; 673 break; 674 case ERASE_4K: 675 case ERASE4_4K: 676 case ERASE_32K: 677 case ERASE4_32K: 678 case ERASE_SECTOR: 679 case ERASE4_SECTOR: 680 case DIE_ERASE: 681 flash_erase(s, s->cur_addr, s->cmd_in_progress); 682 break; 683 case WRSR: 684 switch (get_man(s)) { 685 case MAN_SPANSION: 686 s->quad_enable = !!(s->data[1] & 0x02); 687 break; 688 case MAN_MACRONIX: 689 s->quad_enable = extract32(s->data[0], 6, 1); 690 if (s->len > 1) { 691 s->four_bytes_address_mode = extract32(s->data[1], 5, 1); 692 } 693 break; 694 default: 695 break; 696 } 697 if (s->write_enable) { 698 s->write_enable = false; 699 } 700 break; 701 case EXTEND_ADDR_WRITE: 702 s->ear = s->data[0]; 703 break; 704 case WNVCR: 705 s->nonvolatile_cfg = s->data[0] | (s->data[1] << 8); 706 break; 707 case WVCR: 708 s->volatile_cfg = s->data[0]; 709 break; 710 case WEVCR: 711 s->enh_volatile_cfg = s->data[0]; 712 break; 713 default: 714 break; 715 } 716 } 717 718 static void reset_memory(Flash *s) 719 { 720 s->cmd_in_progress = NOP; 721 s->cur_addr = 0; 722 s->ear = 0; 723 s->four_bytes_address_mode = false; 724 s->len = 0; 725 s->needed_bytes = 0; 726 s->pos = 0; 727 s->state = STATE_IDLE; 728 s->write_enable = false; 729 s->reset_enable = false; 730 s->quad_enable = false; 731 732 switch (get_man(s)) { 733 case MAN_NUMONYX: 734 s->volatile_cfg = 0; 735 s->volatile_cfg |= VCFG_DUMMY; 736 s->volatile_cfg |= VCFG_WRAP_SEQUENTIAL; 737 if ((s->nonvolatile_cfg & NVCFG_XIP_MODE_MASK) 738 != NVCFG_XIP_MODE_DISABLED) { 739 s->volatile_cfg |= VCFG_XIP_MODE_ENABLED; 740 } 741 s->volatile_cfg |= deposit32(s->volatile_cfg, 742 VCFG_DUMMY_CLK_POS, 743 CFG_DUMMY_CLK_LEN, 744 extract32(s->nonvolatile_cfg, 745 NVCFG_DUMMY_CLK_POS, 746 CFG_DUMMY_CLK_LEN) 747 ); 748 749 s->enh_volatile_cfg = 0; 750 s->enh_volatile_cfg |= EVCFG_OUT_DRIVER_STRENGTH_DEF; 751 s->enh_volatile_cfg |= EVCFG_VPP_ACCELERATOR; 752 s->enh_volatile_cfg |= EVCFG_RESET_HOLD_ENABLED; 753 if (s->nonvolatile_cfg & NVCFG_DUAL_IO_MASK) { 754 s->enh_volatile_cfg |= EVCFG_DUAL_IO_ENABLED; 755 } 756 if (s->nonvolatile_cfg & NVCFG_QUAD_IO_MASK) { 757 s->enh_volatile_cfg |= EVCFG_QUAD_IO_ENABLED; 758 } 759 if (!(s->nonvolatile_cfg & NVCFG_4BYTE_ADDR_MASK)) { 760 s->four_bytes_address_mode = true; 761 } 762 if (!(s->nonvolatile_cfg & NVCFG_LOWER_SEGMENT_MASK)) { 763 s->ear = s->size / MAX_3BYTES_SIZE - 1; 764 } 765 break; 766 case MAN_MACRONIX: 767 s->volatile_cfg = 0x7; 768 break; 769 case MAN_SPANSION: 770 s->spansion_cr1v = s->spansion_cr1nv; 771 s->spansion_cr2v = s->spansion_cr2nv; 772 s->spansion_cr3v = s->spansion_cr3nv; 773 s->spansion_cr4v = s->spansion_cr4nv; 774 s->quad_enable = extract32(s->spansion_cr1v, 775 SPANSION_QUAD_CFG_POS, 776 SPANSION_QUAD_CFG_LEN 777 ); 778 s->four_bytes_address_mode = extract32(s->spansion_cr2v, 779 SPANSION_ADDR_LEN_POS, 780 SPANSION_ADDR_LEN_LEN 781 ); 782 break; 783 default: 784 break; 785 } 786 787 DB_PRINT_L(0, "Reset done.\n"); 788 } 789 790 static void decode_fast_read_cmd(Flash *s) 791 { 792 s->needed_bytes = get_addr_length(s); 793 switch (get_man(s)) { 794 /* Dummy cycles - modeled with bytes writes instead of bits */ 795 case MAN_WINBOND: 796 s->needed_bytes += 8; 797 break; 798 case MAN_NUMONYX: 799 s->needed_bytes += extract32(s->volatile_cfg, 4, 4); 800 break; 801 case MAN_MACRONIX: 802 if (extract32(s->volatile_cfg, 6, 2) == 1) { 803 s->needed_bytes += 6; 804 } else { 805 s->needed_bytes += 8; 806 } 807 break; 808 case MAN_SPANSION: 809 s->needed_bytes += extract32(s->spansion_cr2v, 810 SPANSION_DUMMY_CLK_POS, 811 SPANSION_DUMMY_CLK_LEN 812 ); 813 break; 814 default: 815 break; 816 } 817 s->pos = 0; 818 s->len = 0; 819 s->state = STATE_COLLECTING_DATA; 820 } 821 822 static void decode_dio_read_cmd(Flash *s) 823 { 824 s->needed_bytes = get_addr_length(s); 825 /* Dummy cycles modeled with bytes writes instead of bits */ 826 switch (get_man(s)) { 827 case MAN_WINBOND: 828 s->needed_bytes += WINBOND_CONTINUOUS_READ_MODE_CMD_LEN; 829 break; 830 case MAN_SPANSION: 831 s->needed_bytes += SPANSION_CONTINUOUS_READ_MODE_CMD_LEN; 832 s->needed_bytes += extract32(s->spansion_cr2v, 833 SPANSION_DUMMY_CLK_POS, 834 SPANSION_DUMMY_CLK_LEN 835 ); 836 break; 837 case MAN_NUMONYX: 838 s->needed_bytes += extract32(s->volatile_cfg, 4, 4); 839 break; 840 case MAN_MACRONIX: 841 switch (extract32(s->volatile_cfg, 6, 2)) { 842 case 1: 843 s->needed_bytes += 6; 844 break; 845 case 2: 846 s->needed_bytes += 8; 847 break; 848 default: 849 s->needed_bytes += 4; 850 break; 851 } 852 break; 853 default: 854 break; 855 } 856 s->pos = 0; 857 s->len = 0; 858 s->state = STATE_COLLECTING_DATA; 859 } 860 861 static void decode_qio_read_cmd(Flash *s) 862 { 863 s->needed_bytes = get_addr_length(s); 864 /* Dummy cycles modeled with bytes writes instead of bits */ 865 switch (get_man(s)) { 866 case MAN_WINBOND: 867 s->needed_bytes += WINBOND_CONTINUOUS_READ_MODE_CMD_LEN; 868 s->needed_bytes += 4; 869 break; 870 case MAN_SPANSION: 871 s->needed_bytes += SPANSION_CONTINUOUS_READ_MODE_CMD_LEN; 872 s->needed_bytes += extract32(s->spansion_cr2v, 873 SPANSION_DUMMY_CLK_POS, 874 SPANSION_DUMMY_CLK_LEN 875 ); 876 break; 877 case MAN_NUMONYX: 878 s->needed_bytes += extract32(s->volatile_cfg, 4, 4); 879 break; 880 case MAN_MACRONIX: 881 switch (extract32(s->volatile_cfg, 6, 2)) { 882 case 1: 883 s->needed_bytes += 4; 884 break; 885 case 2: 886 s->needed_bytes += 8; 887 break; 888 default: 889 s->needed_bytes += 6; 890 break; 891 } 892 break; 893 default: 894 break; 895 } 896 s->pos = 0; 897 s->len = 0; 898 s->state = STATE_COLLECTING_DATA; 899 } 900 901 static void decode_new_cmd(Flash *s, uint32_t value) 902 { 903 s->cmd_in_progress = value; 904 int i; 905 DB_PRINT_L(0, "decoded new command:%x\n", value); 906 907 if (value != RESET_MEMORY) { 908 s->reset_enable = false; 909 } 910 911 switch (value) { 912 913 case ERASE_4K: 914 case ERASE4_4K: 915 case ERASE_32K: 916 case ERASE4_32K: 917 case ERASE_SECTOR: 918 case ERASE4_SECTOR: 919 case READ: 920 case READ4: 921 case DPP: 922 case QPP: 923 case QPP_4: 924 case PP: 925 case PP4: 926 case PP4_4: 927 case DIE_ERASE: 928 s->needed_bytes = get_addr_length(s); 929 s->pos = 0; 930 s->len = 0; 931 s->state = STATE_COLLECTING_DATA; 932 break; 933 934 case FAST_READ: 935 case FAST_READ4: 936 case DOR: 937 case DOR4: 938 case QOR: 939 case QOR4: 940 decode_fast_read_cmd(s); 941 break; 942 943 case DIOR: 944 case DIOR4: 945 decode_dio_read_cmd(s); 946 break; 947 948 case QIOR: 949 case QIOR4: 950 decode_qio_read_cmd(s); 951 break; 952 953 case WRSR: 954 if (s->write_enable) { 955 switch (get_man(s)) { 956 case MAN_SPANSION: 957 s->needed_bytes = 2; 958 s->state = STATE_COLLECTING_DATA; 959 break; 960 case MAN_MACRONIX: 961 s->needed_bytes = 2; 962 s->state = STATE_COLLECTING_VAR_LEN_DATA; 963 break; 964 default: 965 s->needed_bytes = 1; 966 s->state = STATE_COLLECTING_DATA; 967 } 968 s->pos = 0; 969 } 970 break; 971 972 case WRDI: 973 s->write_enable = false; 974 break; 975 case WREN: 976 s->write_enable = true; 977 break; 978 979 case RDSR: 980 s->data[0] = (!!s->write_enable) << 1; 981 if (get_man(s) == MAN_MACRONIX) { 982 s->data[0] |= (!!s->quad_enable) << 6; 983 } 984 s->pos = 0; 985 s->len = 1; 986 s->state = STATE_READING_DATA; 987 break; 988 989 case READ_FSR: 990 s->data[0] = FSR_FLASH_READY; 991 if (s->four_bytes_address_mode) { 992 s->data[0] |= FSR_4BYTE_ADDR_MODE_ENABLED; 993 } 994 s->pos = 0; 995 s->len = 1; 996 s->state = STATE_READING_DATA; 997 break; 998 999 case JEDEC_READ: 1000 DB_PRINT_L(0, "populated jedec code\n"); 1001 for (i = 0; i < s->pi->id_len; i++) { 1002 s->data[i] = s->pi->id[i]; 1003 } 1004 1005 s->len = s->pi->id_len; 1006 s->pos = 0; 1007 s->state = STATE_READING_DATA; 1008 break; 1009 1010 case RDCR: 1011 s->data[0] = s->volatile_cfg & 0xFF; 1012 s->data[0] |= (!!s->four_bytes_address_mode) << 5; 1013 s->pos = 0; 1014 s->len = 1; 1015 s->state = STATE_READING_DATA; 1016 break; 1017 1018 case BULK_ERASE: 1019 if (s->write_enable) { 1020 DB_PRINT_L(0, "chip erase\n"); 1021 flash_erase(s, 0, BULK_ERASE); 1022 } else { 1023 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: chip erase with write " 1024 "protect!\n"); 1025 } 1026 break; 1027 case NOP: 1028 break; 1029 case EN_4BYTE_ADDR: 1030 s->four_bytes_address_mode = true; 1031 break; 1032 case EX_4BYTE_ADDR: 1033 s->four_bytes_address_mode = false; 1034 break; 1035 case EXTEND_ADDR_READ: 1036 s->data[0] = s->ear; 1037 s->pos = 0; 1038 s->len = 1; 1039 s->state = STATE_READING_DATA; 1040 break; 1041 case EXTEND_ADDR_WRITE: 1042 if (s->write_enable) { 1043 s->needed_bytes = 1; 1044 s->pos = 0; 1045 s->len = 0; 1046 s->state = STATE_COLLECTING_DATA; 1047 } 1048 break; 1049 case RNVCR: 1050 s->data[0] = s->nonvolatile_cfg & 0xFF; 1051 s->data[1] = (s->nonvolatile_cfg >> 8) & 0xFF; 1052 s->pos = 0; 1053 s->len = 2; 1054 s->state = STATE_READING_DATA; 1055 break; 1056 case WNVCR: 1057 if (s->write_enable && get_man(s) == MAN_NUMONYX) { 1058 s->needed_bytes = 2; 1059 s->pos = 0; 1060 s->len = 0; 1061 s->state = STATE_COLLECTING_DATA; 1062 } 1063 break; 1064 case RVCR: 1065 s->data[0] = s->volatile_cfg & 0xFF; 1066 s->pos = 0; 1067 s->len = 1; 1068 s->state = STATE_READING_DATA; 1069 break; 1070 case WVCR: 1071 if (s->write_enable) { 1072 s->needed_bytes = 1; 1073 s->pos = 0; 1074 s->len = 0; 1075 s->state = STATE_COLLECTING_DATA; 1076 } 1077 break; 1078 case REVCR: 1079 s->data[0] = s->enh_volatile_cfg & 0xFF; 1080 s->pos = 0; 1081 s->len = 1; 1082 s->state = STATE_READING_DATA; 1083 break; 1084 case WEVCR: 1085 if (s->write_enable) { 1086 s->needed_bytes = 1; 1087 s->pos = 0; 1088 s->len = 0; 1089 s->state = STATE_COLLECTING_DATA; 1090 } 1091 break; 1092 case RESET_ENABLE: 1093 s->reset_enable = true; 1094 break; 1095 case RESET_MEMORY: 1096 if (s->reset_enable) { 1097 reset_memory(s); 1098 } 1099 break; 1100 case RDCR_EQIO: 1101 switch (get_man(s)) { 1102 case MAN_SPANSION: 1103 s->data[0] = (!!s->quad_enable) << 1; 1104 s->pos = 0; 1105 s->len = 1; 1106 s->state = STATE_READING_DATA; 1107 break; 1108 case MAN_MACRONIX: 1109 s->quad_enable = true; 1110 break; 1111 default: 1112 break; 1113 } 1114 break; 1115 case RSTQIO: 1116 s->quad_enable = false; 1117 break; 1118 default: 1119 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Unknown cmd %x\n", value); 1120 break; 1121 } 1122 } 1123 1124 static int m25p80_cs(SSISlave *ss, bool select) 1125 { 1126 Flash *s = M25P80(ss); 1127 1128 if (select) { 1129 if (s->state == STATE_COLLECTING_VAR_LEN_DATA) { 1130 complete_collecting_data(s); 1131 } 1132 s->len = 0; 1133 s->pos = 0; 1134 s->state = STATE_IDLE; 1135 flash_sync_dirty(s, -1); 1136 } 1137 1138 DB_PRINT_L(0, "%sselect\n", select ? "de" : ""); 1139 1140 return 0; 1141 } 1142 1143 static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx) 1144 { 1145 Flash *s = M25P80(ss); 1146 uint32_t r = 0; 1147 1148 switch (s->state) { 1149 1150 case STATE_PAGE_PROGRAM: 1151 DB_PRINT_L(1, "page program cur_addr=%#" PRIx32 " data=%" PRIx8 "\n", 1152 s->cur_addr, (uint8_t)tx); 1153 flash_write8(s, s->cur_addr, (uint8_t)tx); 1154 s->cur_addr = (s->cur_addr + 1) & (s->size - 1); 1155 break; 1156 1157 case STATE_READ: 1158 r = s->storage[s->cur_addr]; 1159 DB_PRINT_L(1, "READ 0x%" PRIx32 "=%" PRIx8 "\n", s->cur_addr, 1160 (uint8_t)r); 1161 s->cur_addr = (s->cur_addr + 1) & (s->size - 1); 1162 break; 1163 1164 case STATE_COLLECTING_DATA: 1165 case STATE_COLLECTING_VAR_LEN_DATA: 1166 1167 if (s->len >= M25P80_INTERNAL_DATA_BUFFER_SZ) { 1168 qemu_log_mask(LOG_GUEST_ERROR, 1169 "M25P80: Write overrun internal data buffer. " 1170 "SPI controller (QEMU emulator or guest driver) " 1171 "is misbehaving\n"); 1172 s->len = s->pos = 0; 1173 s->state = STATE_IDLE; 1174 break; 1175 } 1176 1177 s->data[s->len] = (uint8_t)tx; 1178 s->len++; 1179 1180 if (s->len == s->needed_bytes) { 1181 complete_collecting_data(s); 1182 } 1183 break; 1184 1185 case STATE_READING_DATA: 1186 1187 if (s->pos >= M25P80_INTERNAL_DATA_BUFFER_SZ) { 1188 qemu_log_mask(LOG_GUEST_ERROR, 1189 "M25P80: Read overrun internal data buffer. " 1190 "SPI controller (QEMU emulator or guest driver) " 1191 "is misbehaving\n"); 1192 s->len = s->pos = 0; 1193 s->state = STATE_IDLE; 1194 break; 1195 } 1196 1197 r = s->data[s->pos]; 1198 s->pos++; 1199 if (s->pos == s->len) { 1200 s->pos = 0; 1201 s->state = STATE_IDLE; 1202 } 1203 break; 1204 1205 default: 1206 case STATE_IDLE: 1207 decode_new_cmd(s, (uint8_t)tx); 1208 break; 1209 } 1210 1211 return r; 1212 } 1213 1214 static void m25p80_realize(SSISlave *ss, Error **errp) 1215 { 1216 Flash *s = M25P80(ss); 1217 M25P80Class *mc = M25P80_GET_CLASS(s); 1218 1219 s->pi = mc->pi; 1220 1221 s->size = s->pi->sector_size * s->pi->n_sectors; 1222 s->dirty_page = -1; 1223 1224 if (s->blk) { 1225 DB_PRINT_L(0, "Binding to IF_MTD drive\n"); 1226 s->storage = blk_blockalign(s->blk, s->size); 1227 1228 if (blk_pread(s->blk, 0, s->storage, s->size) != s->size) { 1229 error_setg(errp, "failed to read the initial flash content"); 1230 return; 1231 } 1232 } else { 1233 DB_PRINT_L(0, "No BDRV - binding to RAM\n"); 1234 s->storage = blk_blockalign(NULL, s->size); 1235 memset(s->storage, 0xFF, s->size); 1236 } 1237 } 1238 1239 static void m25p80_reset(DeviceState *d) 1240 { 1241 Flash *s = M25P80(d); 1242 1243 reset_memory(s); 1244 } 1245 1246 static void m25p80_pre_save(void *opaque) 1247 { 1248 flash_sync_dirty((Flash *)opaque, -1); 1249 } 1250 1251 static Property m25p80_properties[] = { 1252 /* This is default value for Micron flash */ 1253 DEFINE_PROP_UINT32("nonvolatile-cfg", Flash, nonvolatile_cfg, 0x8FFF), 1254 DEFINE_PROP_UINT8("spansion-cr1nv", Flash, spansion_cr1nv, 0x0), 1255 DEFINE_PROP_UINT8("spansion-cr2nv", Flash, spansion_cr2nv, 0x8), 1256 DEFINE_PROP_UINT8("spansion-cr3nv", Flash, spansion_cr3nv, 0x2), 1257 DEFINE_PROP_UINT8("spansion-cr4nv", Flash, spansion_cr4nv, 0x10), 1258 DEFINE_PROP_DRIVE("drive", Flash, blk), 1259 DEFINE_PROP_END_OF_LIST(), 1260 }; 1261 1262 static const VMStateDescription vmstate_m25p80 = { 1263 .name = "m25p80", 1264 .version_id = 0, 1265 .minimum_version_id = 0, 1266 .pre_save = m25p80_pre_save, 1267 .fields = (VMStateField[]) { 1268 VMSTATE_UINT8(state, Flash), 1269 VMSTATE_UINT8_ARRAY(data, Flash, M25P80_INTERNAL_DATA_BUFFER_SZ), 1270 VMSTATE_UINT32(len, Flash), 1271 VMSTATE_UINT32(pos, Flash), 1272 VMSTATE_UINT8(needed_bytes, Flash), 1273 VMSTATE_UINT8(cmd_in_progress, Flash), 1274 VMSTATE_UINT32(cur_addr, Flash), 1275 VMSTATE_BOOL(write_enable, Flash), 1276 VMSTATE_BOOL(reset_enable, Flash), 1277 VMSTATE_UINT8(ear, Flash), 1278 VMSTATE_BOOL(four_bytes_address_mode, Flash), 1279 VMSTATE_UINT32(nonvolatile_cfg, Flash), 1280 VMSTATE_UINT32(volatile_cfg, Flash), 1281 VMSTATE_UINT32(enh_volatile_cfg, Flash), 1282 VMSTATE_BOOL(quad_enable, Flash), 1283 VMSTATE_UINT8(spansion_cr1nv, Flash), 1284 VMSTATE_UINT8(spansion_cr2nv, Flash), 1285 VMSTATE_UINT8(spansion_cr3nv, Flash), 1286 VMSTATE_UINT8(spansion_cr4nv, Flash), 1287 VMSTATE_END_OF_LIST() 1288 } 1289 }; 1290 1291 static void m25p80_class_init(ObjectClass *klass, void *data) 1292 { 1293 DeviceClass *dc = DEVICE_CLASS(klass); 1294 SSISlaveClass *k = SSI_SLAVE_CLASS(klass); 1295 M25P80Class *mc = M25P80_CLASS(klass); 1296 1297 k->realize = m25p80_realize; 1298 k->transfer = m25p80_transfer8; 1299 k->set_cs = m25p80_cs; 1300 k->cs_polarity = SSI_CS_LOW; 1301 dc->vmsd = &vmstate_m25p80; 1302 dc->props = m25p80_properties; 1303 dc->reset = m25p80_reset; 1304 mc->pi = data; 1305 } 1306 1307 static const TypeInfo m25p80_info = { 1308 .name = TYPE_M25P80, 1309 .parent = TYPE_SSI_SLAVE, 1310 .instance_size = sizeof(Flash), 1311 .class_size = sizeof(M25P80Class), 1312 .abstract = true, 1313 }; 1314 1315 static void m25p80_register_types(void) 1316 { 1317 int i; 1318 1319 type_register_static(&m25p80_info); 1320 for (i = 0; i < ARRAY_SIZE(known_devices); ++i) { 1321 TypeInfo ti = { 1322 .name = known_devices[i].part_name, 1323 .parent = TYPE_M25P80, 1324 .class_init = m25p80_class_init, 1325 .class_data = (void *)&known_devices[i], 1326 }; 1327 type_register(&ti); 1328 } 1329 } 1330 1331 type_init(m25p80_register_types) 1332