1 /* 2 * ST M25P80 emulator. Emulate all SPI flash devices based on the m25p80 command 3 * set. Known devices table current as of Jun/2012 and taken from linux. 4 * See drivers/mtd/devices/m25p80.c. 5 * 6 * Copyright (C) 2011 Edgar E. Iglesias <edgar.iglesias@gmail.com> 7 * Copyright (C) 2012 Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> 8 * Copyright (C) 2012 PetaLogix 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 or 13 * (at your option) a later version of the License. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License along 21 * with this program; if not, see <http://www.gnu.org/licenses/>. 22 */ 23 24 #include "qemu/osdep.h" 25 #include "qemu/units.h" 26 #include "hw/hw.h" 27 #include "sysemu/block-backend.h" 28 #include "hw/ssi/ssi.h" 29 #include "qemu/bitops.h" 30 #include "qemu/log.h" 31 #include "qemu/error-report.h" 32 #include "qapi/error.h" 33 34 #ifndef M25P80_ERR_DEBUG 35 #define M25P80_ERR_DEBUG 0 36 #endif 37 38 #define DB_PRINT_L(level, ...) do { \ 39 if (M25P80_ERR_DEBUG > (level)) { \ 40 fprintf(stderr, ": %s: ", __func__); \ 41 fprintf(stderr, ## __VA_ARGS__); \ 42 } \ 43 } while (0) 44 45 /* Fields for FlashPartInfo->flags */ 46 47 /* erase capabilities */ 48 #define ER_4K 1 49 #define ER_32K 2 50 /* set to allow the page program command to write 0s back to 1. Useful for 51 * modelling EEPROM with SPI flash command set 52 */ 53 #define EEPROM 0x100 54 55 /* 16 MiB max in 3 byte address mode */ 56 #define MAX_3BYTES_SIZE 0x1000000 57 58 #define SPI_NOR_MAX_ID_LEN 6 59 60 typedef struct FlashPartInfo { 61 const char *part_name; 62 /* 63 * This array stores the ID bytes. 64 * The first three bytes are the JEDIC ID. 65 * JEDEC ID zero means "no ID" (mostly older chips). 66 */ 67 uint8_t id[SPI_NOR_MAX_ID_LEN]; 68 uint8_t id_len; 69 /* there is confusion between manufacturers as to what a sector is. In this 70 * device model, a "sector" is the size that is erased by the ERASE_SECTOR 71 * command (opcode 0xd8). 72 */ 73 uint32_t sector_size; 74 uint32_t n_sectors; 75 uint32_t page_size; 76 uint16_t flags; 77 /* 78 * Big sized spi nor are often stacked devices, thus sometime 79 * replace chip erase with die erase. 80 * This field inform how many die is in the chip. 81 */ 82 uint8_t die_cnt; 83 } FlashPartInfo; 84 85 /* adapted from linux */ 86 /* Used when the "_ext_id" is two bytes at most */ 87 #define INFO(_part_name, _jedec_id, _ext_id, _sector_size, _n_sectors, _flags)\ 88 .part_name = _part_name,\ 89 .id = {\ 90 ((_jedec_id) >> 16) & 0xff,\ 91 ((_jedec_id) >> 8) & 0xff,\ 92 (_jedec_id) & 0xff,\ 93 ((_ext_id) >> 8) & 0xff,\ 94 (_ext_id) & 0xff,\ 95 },\ 96 .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),\ 97 .sector_size = (_sector_size),\ 98 .n_sectors = (_n_sectors),\ 99 .page_size = 256,\ 100 .flags = (_flags),\ 101 .die_cnt = 0 102 103 #define INFO6(_part_name, _jedec_id, _ext_id, _sector_size, _n_sectors, _flags)\ 104 .part_name = _part_name,\ 105 .id = {\ 106 ((_jedec_id) >> 16) & 0xff,\ 107 ((_jedec_id) >> 8) & 0xff,\ 108 (_jedec_id) & 0xff,\ 109 ((_ext_id) >> 16) & 0xff,\ 110 ((_ext_id) >> 8) & 0xff,\ 111 (_ext_id) & 0xff,\ 112 },\ 113 .id_len = 6,\ 114 .sector_size = (_sector_size),\ 115 .n_sectors = (_n_sectors),\ 116 .page_size = 256,\ 117 .flags = (_flags),\ 118 .die_cnt = 0 119 120 #define INFO_STACKED(_part_name, _jedec_id, _ext_id, _sector_size, _n_sectors,\ 121 _flags, _die_cnt)\ 122 .part_name = _part_name,\ 123 .id = {\ 124 ((_jedec_id) >> 16) & 0xff,\ 125 ((_jedec_id) >> 8) & 0xff,\ 126 (_jedec_id) & 0xff,\ 127 ((_ext_id) >> 8) & 0xff,\ 128 (_ext_id) & 0xff,\ 129 },\ 130 .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),\ 131 .sector_size = (_sector_size),\ 132 .n_sectors = (_n_sectors),\ 133 .page_size = 256,\ 134 .flags = (_flags),\ 135 .die_cnt = _die_cnt 136 137 #define JEDEC_NUMONYX 0x20 138 #define JEDEC_WINBOND 0xEF 139 #define JEDEC_SPANSION 0x01 140 141 /* Numonyx (Micron) Configuration register macros */ 142 #define VCFG_DUMMY 0x1 143 #define VCFG_WRAP_SEQUENTIAL 0x2 144 #define NVCFG_XIP_MODE_DISABLED (7 << 9) 145 #define NVCFG_XIP_MODE_MASK (7 << 9) 146 #define VCFG_XIP_MODE_ENABLED (1 << 3) 147 #define CFG_DUMMY_CLK_LEN 4 148 #define NVCFG_DUMMY_CLK_POS 12 149 #define VCFG_DUMMY_CLK_POS 4 150 #define EVCFG_OUT_DRIVER_STRENGTH_DEF 7 151 #define EVCFG_VPP_ACCELERATOR (1 << 3) 152 #define EVCFG_RESET_HOLD_ENABLED (1 << 4) 153 #define NVCFG_DUAL_IO_MASK (1 << 2) 154 #define EVCFG_DUAL_IO_ENABLED (1 << 6) 155 #define NVCFG_QUAD_IO_MASK (1 << 3) 156 #define EVCFG_QUAD_IO_ENABLED (1 << 7) 157 #define NVCFG_4BYTE_ADDR_MASK (1 << 0) 158 #define NVCFG_LOWER_SEGMENT_MASK (1 << 1) 159 160 /* Numonyx (Micron) Flag Status Register macros */ 161 #define FSR_4BYTE_ADDR_MODE_ENABLED 0x1 162 #define FSR_FLASH_READY (1 << 7) 163 164 /* Spansion configuration registers macros. */ 165 #define SPANSION_QUAD_CFG_POS 0 166 #define SPANSION_QUAD_CFG_LEN 1 167 #define SPANSION_DUMMY_CLK_POS 0 168 #define SPANSION_DUMMY_CLK_LEN 4 169 #define SPANSION_ADDR_LEN_POS 7 170 #define SPANSION_ADDR_LEN_LEN 1 171 172 /* 173 * Spansion read mode command length in bytes, 174 * the mode is currently not supported. 175 */ 176 177 #define SPANSION_CONTINUOUS_READ_MODE_CMD_LEN 1 178 #define WINBOND_CONTINUOUS_READ_MODE_CMD_LEN 1 179 180 static const FlashPartInfo known_devices[] = { 181 /* Atmel -- some are (confusingly) marketed as "DataFlash" */ 182 { INFO("at25fs010", 0x1f6601, 0, 32 << 10, 4, ER_4K) }, 183 { INFO("at25fs040", 0x1f6604, 0, 64 << 10, 8, ER_4K) }, 184 185 { INFO("at25df041a", 0x1f4401, 0, 64 << 10, 8, ER_4K) }, 186 { INFO("at25df321a", 0x1f4701, 0, 64 << 10, 64, ER_4K) }, 187 { INFO("at25df641", 0x1f4800, 0, 64 << 10, 128, ER_4K) }, 188 189 { INFO("at26f004", 0x1f0400, 0, 64 << 10, 8, ER_4K) }, 190 { INFO("at26df081a", 0x1f4501, 0, 64 << 10, 16, ER_4K) }, 191 { INFO("at26df161a", 0x1f4601, 0, 64 << 10, 32, ER_4K) }, 192 { INFO("at26df321", 0x1f4700, 0, 64 << 10, 64, ER_4K) }, 193 194 { INFO("at45db081d", 0x1f2500, 0, 64 << 10, 16, ER_4K) }, 195 196 /* Atmel EEPROMS - it is assumed, that don't care bit in command 197 * is set to 0. Block protection is not supported. 198 */ 199 { INFO("at25128a-nonjedec", 0x0, 0, 1, 131072, EEPROM) }, 200 { INFO("at25256a-nonjedec", 0x0, 0, 1, 262144, EEPROM) }, 201 202 /* EON -- en25xxx */ 203 { INFO("en25f32", 0x1c3116, 0, 64 << 10, 64, ER_4K) }, 204 { INFO("en25p32", 0x1c2016, 0, 64 << 10, 64, 0) }, 205 { INFO("en25q32b", 0x1c3016, 0, 64 << 10, 64, 0) }, 206 { INFO("en25p64", 0x1c2017, 0, 64 << 10, 128, 0) }, 207 { INFO("en25q64", 0x1c3017, 0, 64 << 10, 128, ER_4K) }, 208 209 /* GigaDevice */ 210 { INFO("gd25q32", 0xc84016, 0, 64 << 10, 64, ER_4K) }, 211 { INFO("gd25q64", 0xc84017, 0, 64 << 10, 128, ER_4K) }, 212 213 /* Intel/Numonyx -- xxxs33b */ 214 { INFO("160s33b", 0x898911, 0, 64 << 10, 32, 0) }, 215 { INFO("320s33b", 0x898912, 0, 64 << 10, 64, 0) }, 216 { INFO("640s33b", 0x898913, 0, 64 << 10, 128, 0) }, 217 { INFO("n25q064", 0x20ba17, 0, 64 << 10, 128, 0) }, 218 219 /* Macronix */ 220 { INFO("mx25l2005a", 0xc22012, 0, 64 << 10, 4, ER_4K) }, 221 { INFO("mx25l4005a", 0xc22013, 0, 64 << 10, 8, ER_4K) }, 222 { INFO("mx25l8005", 0xc22014, 0, 64 << 10, 16, 0) }, 223 { INFO("mx25l1606e", 0xc22015, 0, 64 << 10, 32, ER_4K) }, 224 { INFO("mx25l3205d", 0xc22016, 0, 64 << 10, 64, 0) }, 225 { INFO("mx25l6405d", 0xc22017, 0, 64 << 10, 128, 0) }, 226 { INFO("mx25l12805d", 0xc22018, 0, 64 << 10, 256, 0) }, 227 { INFO("mx25l12855e", 0xc22618, 0, 64 << 10, 256, 0) }, 228 { INFO("mx25l25635e", 0xc22019, 0, 64 << 10, 512, 0) }, 229 { INFO("mx25l25655e", 0xc22619, 0, 64 << 10, 512, 0) }, 230 { INFO("mx66u51235f", 0xc2253a, 0, 64 << 10, 1024, ER_4K | ER_32K) }, 231 { INFO("mx66u1g45g", 0xc2253b, 0, 64 << 10, 2048, ER_4K | ER_32K) }, 232 { INFO("mx66l1g45g", 0xc2201b, 0, 64 << 10, 2048, ER_4K | ER_32K) }, 233 234 /* Micron */ 235 { INFO("n25q032a11", 0x20bb16, 0, 64 << 10, 64, ER_4K) }, 236 { INFO("n25q032a13", 0x20ba16, 0, 64 << 10, 64, ER_4K) }, 237 { INFO("n25q064a11", 0x20bb17, 0, 64 << 10, 128, ER_4K) }, 238 { INFO("n25q064a13", 0x20ba17, 0, 64 << 10, 128, ER_4K) }, 239 { INFO("n25q128a11", 0x20bb18, 0, 64 << 10, 256, ER_4K) }, 240 { INFO("n25q128a13", 0x20ba18, 0, 64 << 10, 256, ER_4K) }, 241 { INFO("n25q256a11", 0x20bb19, 0, 64 << 10, 512, ER_4K) }, 242 { INFO("n25q256a13", 0x20ba19, 0, 64 << 10, 512, ER_4K) }, 243 { INFO("n25q512a11", 0x20bb20, 0, 64 << 10, 1024, ER_4K) }, 244 { INFO("n25q512a13", 0x20ba20, 0, 64 << 10, 1024, ER_4K) }, 245 { INFO("n25q128", 0x20ba18, 0, 64 << 10, 256, 0) }, 246 { INFO("n25q256a", 0x20ba19, 0, 64 << 10, 512, ER_4K) }, 247 { INFO("n25q512a", 0x20ba20, 0, 64 << 10, 1024, ER_4K) }, 248 { INFO_STACKED("n25q00", 0x20ba21, 0x1000, 64 << 10, 2048, ER_4K, 4) }, 249 { INFO_STACKED("n25q00a", 0x20bb21, 0x1000, 64 << 10, 2048, ER_4K, 4) }, 250 { INFO_STACKED("mt25ql01g", 0x20ba21, 0x1040, 64 << 10, 2048, ER_4K, 2) }, 251 { INFO_STACKED("mt25qu01g", 0x20bb21, 0x1040, 64 << 10, 2048, ER_4K, 2) }, 252 253 /* Spansion -- single (large) sector size only, at least 254 * for the chips listed here (without boot sectors). 255 */ 256 { INFO("s25sl032p", 0x010215, 0x4d00, 64 << 10, 64, ER_4K) }, 257 { INFO("s25sl064p", 0x010216, 0x4d00, 64 << 10, 128, ER_4K) }, 258 { INFO("s25fl256s0", 0x010219, 0x4d00, 256 << 10, 128, 0) }, 259 { INFO("s25fl256s1", 0x010219, 0x4d01, 64 << 10, 512, 0) }, 260 { INFO6("s25fl512s", 0x010220, 0x4d0080, 256 << 10, 256, 0) }, 261 { INFO6("s70fl01gs", 0x010221, 0x4d0080, 256 << 10, 512, 0) }, 262 { INFO("s25sl12800", 0x012018, 0x0300, 256 << 10, 64, 0) }, 263 { INFO("s25sl12801", 0x012018, 0x0301, 64 << 10, 256, 0) }, 264 { INFO("s25fl129p0", 0x012018, 0x4d00, 256 << 10, 64, 0) }, 265 { INFO("s25fl129p1", 0x012018, 0x4d01, 64 << 10, 256, 0) }, 266 { INFO("s25sl004a", 0x010212, 0, 64 << 10, 8, 0) }, 267 { INFO("s25sl008a", 0x010213, 0, 64 << 10, 16, 0) }, 268 { INFO("s25sl016a", 0x010214, 0, 64 << 10, 32, 0) }, 269 { INFO("s25sl032a", 0x010215, 0, 64 << 10, 64, 0) }, 270 { INFO("s25sl064a", 0x010216, 0, 64 << 10, 128, 0) }, 271 { INFO("s25fl016k", 0xef4015, 0, 64 << 10, 32, ER_4K | ER_32K) }, 272 { INFO("s25fl064k", 0xef4017, 0, 64 << 10, 128, ER_4K | ER_32K) }, 273 274 /* Spansion -- boot sectors support */ 275 { INFO6("s25fs512s", 0x010220, 0x4d0081, 256 << 10, 256, 0) }, 276 { INFO6("s70fs01gs", 0x010221, 0x4d0081, 256 << 10, 512, 0) }, 277 278 /* SST -- large erase sizes are "overlays", "sectors" are 4<< 10 */ 279 { INFO("sst25vf040b", 0xbf258d, 0, 64 << 10, 8, ER_4K) }, 280 { INFO("sst25vf080b", 0xbf258e, 0, 64 << 10, 16, ER_4K) }, 281 { INFO("sst25vf016b", 0xbf2541, 0, 64 << 10, 32, ER_4K) }, 282 { INFO("sst25vf032b", 0xbf254a, 0, 64 << 10, 64, ER_4K) }, 283 { INFO("sst25wf512", 0xbf2501, 0, 64 << 10, 1, ER_4K) }, 284 { INFO("sst25wf010", 0xbf2502, 0, 64 << 10, 2, ER_4K) }, 285 { INFO("sst25wf020", 0xbf2503, 0, 64 << 10, 4, ER_4K) }, 286 { INFO("sst25wf040", 0xbf2504, 0, 64 << 10, 8, ER_4K) }, 287 { INFO("sst25wf080", 0xbf2505, 0, 64 << 10, 16, ER_4K) }, 288 289 /* ST Microelectronics -- newer production may have feature updates */ 290 { INFO("m25p05", 0x202010, 0, 32 << 10, 2, 0) }, 291 { INFO("m25p10", 0x202011, 0, 32 << 10, 4, 0) }, 292 { INFO("m25p20", 0x202012, 0, 64 << 10, 4, 0) }, 293 { INFO("m25p40", 0x202013, 0, 64 << 10, 8, 0) }, 294 { INFO("m25p80", 0x202014, 0, 64 << 10, 16, 0) }, 295 { INFO("m25p16", 0x202015, 0, 64 << 10, 32, 0) }, 296 { INFO("m25p32", 0x202016, 0, 64 << 10, 64, 0) }, 297 { INFO("m25p64", 0x202017, 0, 64 << 10, 128, 0) }, 298 { INFO("m25p128", 0x202018, 0, 256 << 10, 64, 0) }, 299 { INFO("n25q032", 0x20ba16, 0, 64 << 10, 64, 0) }, 300 301 { INFO("m45pe10", 0x204011, 0, 64 << 10, 2, 0) }, 302 { INFO("m45pe80", 0x204014, 0, 64 << 10, 16, 0) }, 303 { INFO("m45pe16", 0x204015, 0, 64 << 10, 32, 0) }, 304 305 { INFO("m25pe20", 0x208012, 0, 64 << 10, 4, 0) }, 306 { INFO("m25pe80", 0x208014, 0, 64 << 10, 16, 0) }, 307 { INFO("m25pe16", 0x208015, 0, 64 << 10, 32, ER_4K) }, 308 309 { INFO("m25px32", 0x207116, 0, 64 << 10, 64, ER_4K) }, 310 { INFO("m25px32-s0", 0x207316, 0, 64 << 10, 64, ER_4K) }, 311 { INFO("m25px32-s1", 0x206316, 0, 64 << 10, 64, ER_4K) }, 312 { INFO("m25px64", 0x207117, 0, 64 << 10, 128, 0) }, 313 314 /* Winbond -- w25x "blocks" are 64k, "sectors" are 4KiB */ 315 { INFO("w25x10", 0xef3011, 0, 64 << 10, 2, ER_4K) }, 316 { INFO("w25x20", 0xef3012, 0, 64 << 10, 4, ER_4K) }, 317 { INFO("w25x40", 0xef3013, 0, 64 << 10, 8, ER_4K) }, 318 { INFO("w25x80", 0xef3014, 0, 64 << 10, 16, ER_4K) }, 319 { INFO("w25x16", 0xef3015, 0, 64 << 10, 32, ER_4K) }, 320 { INFO("w25x32", 0xef3016, 0, 64 << 10, 64, ER_4K) }, 321 { INFO("w25q32", 0xef4016, 0, 64 << 10, 64, ER_4K) }, 322 { INFO("w25q32dw", 0xef6016, 0, 64 << 10, 64, ER_4K) }, 323 { INFO("w25x64", 0xef3017, 0, 64 << 10, 128, ER_4K) }, 324 { INFO("w25q64", 0xef4017, 0, 64 << 10, 128, ER_4K) }, 325 { INFO("w25q80", 0xef5014, 0, 64 << 10, 16, ER_4K) }, 326 { INFO("w25q80bl", 0xef4014, 0, 64 << 10, 16, ER_4K) }, 327 { INFO("w25q256", 0xef4019, 0, 64 << 10, 512, ER_4K) }, 328 }; 329 330 typedef enum { 331 NOP = 0, 332 WRSR = 0x1, 333 WRDI = 0x4, 334 RDSR = 0x5, 335 WREN = 0x6, 336 BRRD = 0x16, 337 BRWR = 0x17, 338 JEDEC_READ = 0x9f, 339 BULK_ERASE_60 = 0x60, 340 BULK_ERASE = 0xc7, 341 READ_FSR = 0x70, 342 RDCR = 0x15, 343 344 READ = 0x03, 345 READ4 = 0x13, 346 FAST_READ = 0x0b, 347 FAST_READ4 = 0x0c, 348 DOR = 0x3b, 349 DOR4 = 0x3c, 350 QOR = 0x6b, 351 QOR4 = 0x6c, 352 DIOR = 0xbb, 353 DIOR4 = 0xbc, 354 QIOR = 0xeb, 355 QIOR4 = 0xec, 356 357 PP = 0x02, 358 PP4 = 0x12, 359 PP4_4 = 0x3e, 360 DPP = 0xa2, 361 QPP = 0x32, 362 QPP_4 = 0x34, 363 RDID_90 = 0x90, 364 RDID_AB = 0xab, 365 366 ERASE_4K = 0x20, 367 ERASE4_4K = 0x21, 368 ERASE_32K = 0x52, 369 ERASE4_32K = 0x5c, 370 ERASE_SECTOR = 0xd8, 371 ERASE4_SECTOR = 0xdc, 372 373 EN_4BYTE_ADDR = 0xB7, 374 EX_4BYTE_ADDR = 0xE9, 375 376 EXTEND_ADDR_READ = 0xC8, 377 EXTEND_ADDR_WRITE = 0xC5, 378 379 RESET_ENABLE = 0x66, 380 RESET_MEMORY = 0x99, 381 382 /* 383 * Micron: 0x35 - enable QPI 384 * Spansion: 0x35 - read control register 385 */ 386 RDCR_EQIO = 0x35, 387 RSTQIO = 0xf5, 388 389 RNVCR = 0xB5, 390 WNVCR = 0xB1, 391 392 RVCR = 0x85, 393 WVCR = 0x81, 394 395 REVCR = 0x65, 396 WEVCR = 0x61, 397 398 DIE_ERASE = 0xC4, 399 } FlashCMD; 400 401 typedef enum { 402 STATE_IDLE, 403 STATE_PAGE_PROGRAM, 404 STATE_READ, 405 STATE_COLLECTING_DATA, 406 STATE_COLLECTING_VAR_LEN_DATA, 407 STATE_READING_DATA, 408 } CMDState; 409 410 typedef enum { 411 MAN_SPANSION, 412 MAN_MACRONIX, 413 MAN_NUMONYX, 414 MAN_WINBOND, 415 MAN_SST, 416 MAN_GENERIC, 417 } Manufacturer; 418 419 #define M25P80_INTERNAL_DATA_BUFFER_SZ 16 420 421 typedef struct Flash { 422 SSISlave parent_obj; 423 424 BlockBackend *blk; 425 426 uint8_t *storage; 427 uint32_t size; 428 int page_size; 429 430 uint8_t state; 431 uint8_t data[M25P80_INTERNAL_DATA_BUFFER_SZ]; 432 uint32_t len; 433 uint32_t pos; 434 bool data_read_loop; 435 uint8_t needed_bytes; 436 uint8_t cmd_in_progress; 437 uint32_t cur_addr; 438 uint32_t nonvolatile_cfg; 439 /* Configuration register for Macronix */ 440 uint32_t volatile_cfg; 441 uint32_t enh_volatile_cfg; 442 /* Spansion cfg registers. */ 443 uint8_t spansion_cr1nv; 444 uint8_t spansion_cr2nv; 445 uint8_t spansion_cr3nv; 446 uint8_t spansion_cr4nv; 447 uint8_t spansion_cr1v; 448 uint8_t spansion_cr2v; 449 uint8_t spansion_cr3v; 450 uint8_t spansion_cr4v; 451 bool write_enable; 452 bool four_bytes_address_mode; 453 bool reset_enable; 454 bool quad_enable; 455 uint8_t ear; 456 457 int64_t dirty_page; 458 459 const FlashPartInfo *pi; 460 461 } Flash; 462 463 typedef struct M25P80Class { 464 SSISlaveClass parent_class; 465 FlashPartInfo *pi; 466 } M25P80Class; 467 468 #define TYPE_M25P80 "m25p80-generic" 469 #define M25P80(obj) \ 470 OBJECT_CHECK(Flash, (obj), TYPE_M25P80) 471 #define M25P80_CLASS(klass) \ 472 OBJECT_CLASS_CHECK(M25P80Class, (klass), TYPE_M25P80) 473 #define M25P80_GET_CLASS(obj) \ 474 OBJECT_GET_CLASS(M25P80Class, (obj), TYPE_M25P80) 475 476 static inline Manufacturer get_man(Flash *s) 477 { 478 switch (s->pi->id[0]) { 479 case 0x20: 480 return MAN_NUMONYX; 481 case 0xEF: 482 return MAN_WINBOND; 483 case 0x01: 484 return MAN_SPANSION; 485 case 0xC2: 486 return MAN_MACRONIX; 487 case 0xBF: 488 return MAN_SST; 489 default: 490 return MAN_GENERIC; 491 } 492 } 493 494 static void blk_sync_complete(void *opaque, int ret) 495 { 496 QEMUIOVector *iov = opaque; 497 498 qemu_iovec_destroy(iov); 499 g_free(iov); 500 501 /* do nothing. Masters do not directly interact with the backing store, 502 * only the working copy so no mutexing required. 503 */ 504 } 505 506 static void flash_sync_page(Flash *s, int page) 507 { 508 QEMUIOVector *iov; 509 510 if (!s->blk || blk_is_read_only(s->blk)) { 511 return; 512 } 513 514 iov = g_new(QEMUIOVector, 1); 515 qemu_iovec_init(iov, 1); 516 qemu_iovec_add(iov, s->storage + page * s->pi->page_size, 517 s->pi->page_size); 518 blk_aio_pwritev(s->blk, page * s->pi->page_size, iov, 0, 519 blk_sync_complete, iov); 520 } 521 522 static inline void flash_sync_area(Flash *s, int64_t off, int64_t len) 523 { 524 QEMUIOVector *iov; 525 526 if (!s->blk || blk_is_read_only(s->blk)) { 527 return; 528 } 529 530 assert(!(len % BDRV_SECTOR_SIZE)); 531 iov = g_new(QEMUIOVector, 1); 532 qemu_iovec_init(iov, 1); 533 qemu_iovec_add(iov, s->storage + off, len); 534 blk_aio_pwritev(s->blk, off, iov, 0, blk_sync_complete, iov); 535 } 536 537 static void flash_erase(Flash *s, int offset, FlashCMD cmd) 538 { 539 uint32_t len; 540 uint8_t capa_to_assert = 0; 541 542 switch (cmd) { 543 case ERASE_4K: 544 case ERASE4_4K: 545 len = 4 * KiB; 546 capa_to_assert = ER_4K; 547 break; 548 case ERASE_32K: 549 case ERASE4_32K: 550 len = 32 * KiB; 551 capa_to_assert = ER_32K; 552 break; 553 case ERASE_SECTOR: 554 case ERASE4_SECTOR: 555 len = s->pi->sector_size; 556 break; 557 case BULK_ERASE: 558 len = s->size; 559 break; 560 case DIE_ERASE: 561 if (s->pi->die_cnt) { 562 len = s->size / s->pi->die_cnt; 563 offset = offset & (~(len - 1)); 564 } else { 565 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: die erase is not supported" 566 " by device\n"); 567 return; 568 } 569 break; 570 default: 571 abort(); 572 } 573 574 DB_PRINT_L(0, "offset = %#x, len = %d\n", offset, len); 575 if ((s->pi->flags & capa_to_assert) != capa_to_assert) { 576 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: %d erase size not supported by" 577 " device\n", len); 578 } 579 580 if (!s->write_enable) { 581 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: erase with write protect!\n"); 582 return; 583 } 584 memset(s->storage + offset, 0xff, len); 585 flash_sync_area(s, offset, len); 586 } 587 588 static inline void flash_sync_dirty(Flash *s, int64_t newpage) 589 { 590 if (s->dirty_page >= 0 && s->dirty_page != newpage) { 591 flash_sync_page(s, s->dirty_page); 592 s->dirty_page = newpage; 593 } 594 } 595 596 static inline 597 void flash_write8(Flash *s, uint32_t addr, uint8_t data) 598 { 599 uint32_t page = addr / s->pi->page_size; 600 uint8_t prev = s->storage[s->cur_addr]; 601 602 if (!s->write_enable) { 603 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: write with write protect!\n"); 604 } 605 606 if ((prev ^ data) & data) { 607 DB_PRINT_L(1, "programming zero to one! addr=%" PRIx32 " %" PRIx8 608 " -> %" PRIx8 "\n", addr, prev, data); 609 } 610 611 if (s->pi->flags & EEPROM) { 612 s->storage[s->cur_addr] = data; 613 } else { 614 s->storage[s->cur_addr] &= data; 615 } 616 617 flash_sync_dirty(s, page); 618 s->dirty_page = page; 619 } 620 621 static inline int get_addr_length(Flash *s) 622 { 623 /* check if eeprom is in use */ 624 if (s->pi->flags == EEPROM) { 625 return 2; 626 } 627 628 switch (s->cmd_in_progress) { 629 case PP4: 630 case PP4_4: 631 case QPP_4: 632 case READ4: 633 case QIOR4: 634 case ERASE4_4K: 635 case ERASE4_32K: 636 case ERASE4_SECTOR: 637 case FAST_READ4: 638 case DOR4: 639 case QOR4: 640 case DIOR4: 641 return 4; 642 default: 643 return s->four_bytes_address_mode ? 4 : 3; 644 } 645 } 646 647 static void complete_collecting_data(Flash *s) 648 { 649 int i, n; 650 651 n = get_addr_length(s); 652 s->cur_addr = (n == 3 ? s->ear : 0); 653 for (i = 0; i < n; ++i) { 654 s->cur_addr <<= 8; 655 s->cur_addr |= s->data[i]; 656 } 657 658 s->cur_addr &= s->size - 1; 659 660 s->state = STATE_IDLE; 661 662 switch (s->cmd_in_progress) { 663 case DPP: 664 case QPP: 665 case QPP_4: 666 case PP: 667 case PP4: 668 case PP4_4: 669 s->state = STATE_PAGE_PROGRAM; 670 break; 671 case READ: 672 case READ4: 673 case FAST_READ: 674 case FAST_READ4: 675 case DOR: 676 case DOR4: 677 case QOR: 678 case QOR4: 679 case DIOR: 680 case DIOR4: 681 case QIOR: 682 case QIOR4: 683 s->state = STATE_READ; 684 break; 685 case ERASE_4K: 686 case ERASE4_4K: 687 case ERASE_32K: 688 case ERASE4_32K: 689 case ERASE_SECTOR: 690 case ERASE4_SECTOR: 691 case DIE_ERASE: 692 flash_erase(s, s->cur_addr, s->cmd_in_progress); 693 break; 694 case WRSR: 695 switch (get_man(s)) { 696 case MAN_SPANSION: 697 s->quad_enable = !!(s->data[1] & 0x02); 698 break; 699 case MAN_MACRONIX: 700 s->quad_enable = extract32(s->data[0], 6, 1); 701 if (s->len > 1) { 702 s->volatile_cfg = s->data[1]; 703 s->four_bytes_address_mode = extract32(s->data[1], 5, 1); 704 } 705 break; 706 default: 707 break; 708 } 709 if (s->write_enable) { 710 s->write_enable = false; 711 } 712 break; 713 case BRWR: 714 case EXTEND_ADDR_WRITE: 715 s->ear = s->data[0]; 716 break; 717 case WNVCR: 718 s->nonvolatile_cfg = s->data[0] | (s->data[1] << 8); 719 break; 720 case WVCR: 721 s->volatile_cfg = s->data[0]; 722 break; 723 case WEVCR: 724 s->enh_volatile_cfg = s->data[0]; 725 break; 726 case RDID_90: 727 case RDID_AB: 728 if (get_man(s) == MAN_SST) { 729 if (s->cur_addr <= 1) { 730 if (s->cur_addr) { 731 s->data[0] = s->pi->id[2]; 732 s->data[1] = s->pi->id[0]; 733 } else { 734 s->data[0] = s->pi->id[0]; 735 s->data[1] = s->pi->id[2]; 736 } 737 s->pos = 0; 738 s->len = 2; 739 s->data_read_loop = true; 740 s->state = STATE_READING_DATA; 741 } else { 742 qemu_log_mask(LOG_GUEST_ERROR, 743 "M25P80: Invalid read id address\n"); 744 } 745 } else { 746 qemu_log_mask(LOG_GUEST_ERROR, 747 "M25P80: Read id (command 0x90/0xAB) is not supported" 748 " by device\n"); 749 } 750 break; 751 default: 752 break; 753 } 754 } 755 756 static void reset_memory(Flash *s) 757 { 758 s->cmd_in_progress = NOP; 759 s->cur_addr = 0; 760 s->ear = 0; 761 s->four_bytes_address_mode = false; 762 s->len = 0; 763 s->needed_bytes = 0; 764 s->pos = 0; 765 s->state = STATE_IDLE; 766 s->write_enable = false; 767 s->reset_enable = false; 768 s->quad_enable = false; 769 770 switch (get_man(s)) { 771 case MAN_NUMONYX: 772 s->volatile_cfg = 0; 773 s->volatile_cfg |= VCFG_DUMMY; 774 s->volatile_cfg |= VCFG_WRAP_SEQUENTIAL; 775 if ((s->nonvolatile_cfg & NVCFG_XIP_MODE_MASK) 776 != NVCFG_XIP_MODE_DISABLED) { 777 s->volatile_cfg |= VCFG_XIP_MODE_ENABLED; 778 } 779 s->volatile_cfg |= deposit32(s->volatile_cfg, 780 VCFG_DUMMY_CLK_POS, 781 CFG_DUMMY_CLK_LEN, 782 extract32(s->nonvolatile_cfg, 783 NVCFG_DUMMY_CLK_POS, 784 CFG_DUMMY_CLK_LEN) 785 ); 786 787 s->enh_volatile_cfg = 0; 788 s->enh_volatile_cfg |= EVCFG_OUT_DRIVER_STRENGTH_DEF; 789 s->enh_volatile_cfg |= EVCFG_VPP_ACCELERATOR; 790 s->enh_volatile_cfg |= EVCFG_RESET_HOLD_ENABLED; 791 if (s->nonvolatile_cfg & NVCFG_DUAL_IO_MASK) { 792 s->enh_volatile_cfg |= EVCFG_DUAL_IO_ENABLED; 793 } 794 if (s->nonvolatile_cfg & NVCFG_QUAD_IO_MASK) { 795 s->enh_volatile_cfg |= EVCFG_QUAD_IO_ENABLED; 796 } 797 if (!(s->nonvolatile_cfg & NVCFG_4BYTE_ADDR_MASK)) { 798 s->four_bytes_address_mode = true; 799 } 800 if (!(s->nonvolatile_cfg & NVCFG_LOWER_SEGMENT_MASK)) { 801 s->ear = s->size / MAX_3BYTES_SIZE - 1; 802 } 803 break; 804 case MAN_MACRONIX: 805 s->volatile_cfg = 0x7; 806 break; 807 case MAN_SPANSION: 808 s->spansion_cr1v = s->spansion_cr1nv; 809 s->spansion_cr2v = s->spansion_cr2nv; 810 s->spansion_cr3v = s->spansion_cr3nv; 811 s->spansion_cr4v = s->spansion_cr4nv; 812 s->quad_enable = extract32(s->spansion_cr1v, 813 SPANSION_QUAD_CFG_POS, 814 SPANSION_QUAD_CFG_LEN 815 ); 816 s->four_bytes_address_mode = extract32(s->spansion_cr2v, 817 SPANSION_ADDR_LEN_POS, 818 SPANSION_ADDR_LEN_LEN 819 ); 820 break; 821 default: 822 break; 823 } 824 825 DB_PRINT_L(0, "Reset done.\n"); 826 } 827 828 static void decode_fast_read_cmd(Flash *s) 829 { 830 s->needed_bytes = get_addr_length(s); 831 switch (get_man(s)) { 832 /* Dummy cycles - modeled with bytes writes instead of bits */ 833 case MAN_WINBOND: 834 s->needed_bytes += 8; 835 break; 836 case MAN_NUMONYX: 837 s->needed_bytes += extract32(s->volatile_cfg, 4, 4); 838 break; 839 case MAN_MACRONIX: 840 if (extract32(s->volatile_cfg, 6, 2) == 1) { 841 s->needed_bytes += 6; 842 } else { 843 s->needed_bytes += 8; 844 } 845 break; 846 case MAN_SPANSION: 847 s->needed_bytes += extract32(s->spansion_cr2v, 848 SPANSION_DUMMY_CLK_POS, 849 SPANSION_DUMMY_CLK_LEN 850 ); 851 break; 852 default: 853 break; 854 } 855 s->pos = 0; 856 s->len = 0; 857 s->state = STATE_COLLECTING_DATA; 858 } 859 860 static void decode_dio_read_cmd(Flash *s) 861 { 862 s->needed_bytes = get_addr_length(s); 863 /* Dummy cycles modeled with bytes writes instead of bits */ 864 switch (get_man(s)) { 865 case MAN_WINBOND: 866 s->needed_bytes += WINBOND_CONTINUOUS_READ_MODE_CMD_LEN; 867 break; 868 case MAN_SPANSION: 869 s->needed_bytes += SPANSION_CONTINUOUS_READ_MODE_CMD_LEN; 870 s->needed_bytes += extract32(s->spansion_cr2v, 871 SPANSION_DUMMY_CLK_POS, 872 SPANSION_DUMMY_CLK_LEN 873 ); 874 break; 875 case MAN_NUMONYX: 876 s->needed_bytes += extract32(s->volatile_cfg, 4, 4); 877 break; 878 case MAN_MACRONIX: 879 switch (extract32(s->volatile_cfg, 6, 2)) { 880 case 1: 881 s->needed_bytes += 6; 882 break; 883 case 2: 884 s->needed_bytes += 8; 885 break; 886 default: 887 s->needed_bytes += 4; 888 break; 889 } 890 break; 891 default: 892 break; 893 } 894 s->pos = 0; 895 s->len = 0; 896 s->state = STATE_COLLECTING_DATA; 897 } 898 899 static void decode_qio_read_cmd(Flash *s) 900 { 901 s->needed_bytes = get_addr_length(s); 902 /* Dummy cycles modeled with bytes writes instead of bits */ 903 switch (get_man(s)) { 904 case MAN_WINBOND: 905 s->needed_bytes += WINBOND_CONTINUOUS_READ_MODE_CMD_LEN; 906 s->needed_bytes += 4; 907 break; 908 case MAN_SPANSION: 909 s->needed_bytes += SPANSION_CONTINUOUS_READ_MODE_CMD_LEN; 910 s->needed_bytes += extract32(s->spansion_cr2v, 911 SPANSION_DUMMY_CLK_POS, 912 SPANSION_DUMMY_CLK_LEN 913 ); 914 break; 915 case MAN_NUMONYX: 916 s->needed_bytes += extract32(s->volatile_cfg, 4, 4); 917 break; 918 case MAN_MACRONIX: 919 switch (extract32(s->volatile_cfg, 6, 2)) { 920 case 1: 921 s->needed_bytes += 4; 922 break; 923 case 2: 924 s->needed_bytes += 8; 925 break; 926 default: 927 s->needed_bytes += 6; 928 break; 929 } 930 break; 931 default: 932 break; 933 } 934 s->pos = 0; 935 s->len = 0; 936 s->state = STATE_COLLECTING_DATA; 937 } 938 939 static void decode_new_cmd(Flash *s, uint32_t value) 940 { 941 s->cmd_in_progress = value; 942 int i; 943 DB_PRINT_L(0, "decoded new command:%x\n", value); 944 945 if (value != RESET_MEMORY) { 946 s->reset_enable = false; 947 } 948 949 switch (value) { 950 951 case ERASE_4K: 952 case ERASE4_4K: 953 case ERASE_32K: 954 case ERASE4_32K: 955 case ERASE_SECTOR: 956 case ERASE4_SECTOR: 957 case READ: 958 case READ4: 959 case DPP: 960 case QPP: 961 case QPP_4: 962 case PP: 963 case PP4: 964 case PP4_4: 965 case DIE_ERASE: 966 case RDID_90: 967 case RDID_AB: 968 s->needed_bytes = get_addr_length(s); 969 s->pos = 0; 970 s->len = 0; 971 s->state = STATE_COLLECTING_DATA; 972 break; 973 974 case FAST_READ: 975 case FAST_READ4: 976 case DOR: 977 case DOR4: 978 case QOR: 979 case QOR4: 980 decode_fast_read_cmd(s); 981 break; 982 983 case DIOR: 984 case DIOR4: 985 decode_dio_read_cmd(s); 986 break; 987 988 case QIOR: 989 case QIOR4: 990 decode_qio_read_cmd(s); 991 break; 992 993 case WRSR: 994 if (s->write_enable) { 995 switch (get_man(s)) { 996 case MAN_SPANSION: 997 s->needed_bytes = 2; 998 s->state = STATE_COLLECTING_DATA; 999 break; 1000 case MAN_MACRONIX: 1001 s->needed_bytes = 2; 1002 s->state = STATE_COLLECTING_VAR_LEN_DATA; 1003 break; 1004 default: 1005 s->needed_bytes = 1; 1006 s->state = STATE_COLLECTING_DATA; 1007 } 1008 s->pos = 0; 1009 } 1010 break; 1011 1012 case WRDI: 1013 s->write_enable = false; 1014 break; 1015 case WREN: 1016 s->write_enable = true; 1017 break; 1018 1019 case RDSR: 1020 s->data[0] = (!!s->write_enable) << 1; 1021 if (get_man(s) == MAN_MACRONIX) { 1022 s->data[0] |= (!!s->quad_enable) << 6; 1023 } 1024 s->pos = 0; 1025 s->len = 1; 1026 s->data_read_loop = true; 1027 s->state = STATE_READING_DATA; 1028 break; 1029 1030 case READ_FSR: 1031 s->data[0] = FSR_FLASH_READY; 1032 if (s->four_bytes_address_mode) { 1033 s->data[0] |= FSR_4BYTE_ADDR_MODE_ENABLED; 1034 } 1035 s->pos = 0; 1036 s->len = 1; 1037 s->data_read_loop = true; 1038 s->state = STATE_READING_DATA; 1039 break; 1040 1041 case JEDEC_READ: 1042 DB_PRINT_L(0, "populated jedec code\n"); 1043 for (i = 0; i < s->pi->id_len; i++) { 1044 s->data[i] = s->pi->id[i]; 1045 } 1046 1047 s->len = s->pi->id_len; 1048 s->pos = 0; 1049 s->state = STATE_READING_DATA; 1050 break; 1051 1052 case RDCR: 1053 s->data[0] = s->volatile_cfg & 0xFF; 1054 s->data[0] |= (!!s->four_bytes_address_mode) << 5; 1055 s->pos = 0; 1056 s->len = 1; 1057 s->state = STATE_READING_DATA; 1058 break; 1059 1060 case BULK_ERASE_60: 1061 case BULK_ERASE: 1062 if (s->write_enable) { 1063 DB_PRINT_L(0, "chip erase\n"); 1064 flash_erase(s, 0, BULK_ERASE); 1065 } else { 1066 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: chip erase with write " 1067 "protect!\n"); 1068 } 1069 break; 1070 case NOP: 1071 break; 1072 case EN_4BYTE_ADDR: 1073 s->four_bytes_address_mode = true; 1074 break; 1075 case EX_4BYTE_ADDR: 1076 s->four_bytes_address_mode = false; 1077 break; 1078 case BRRD: 1079 case EXTEND_ADDR_READ: 1080 s->data[0] = s->ear; 1081 s->pos = 0; 1082 s->len = 1; 1083 s->state = STATE_READING_DATA; 1084 break; 1085 case BRWR: 1086 case EXTEND_ADDR_WRITE: 1087 if (s->write_enable) { 1088 s->needed_bytes = 1; 1089 s->pos = 0; 1090 s->len = 0; 1091 s->state = STATE_COLLECTING_DATA; 1092 } 1093 break; 1094 case RNVCR: 1095 s->data[0] = s->nonvolatile_cfg & 0xFF; 1096 s->data[1] = (s->nonvolatile_cfg >> 8) & 0xFF; 1097 s->pos = 0; 1098 s->len = 2; 1099 s->state = STATE_READING_DATA; 1100 break; 1101 case WNVCR: 1102 if (s->write_enable && get_man(s) == MAN_NUMONYX) { 1103 s->needed_bytes = 2; 1104 s->pos = 0; 1105 s->len = 0; 1106 s->state = STATE_COLLECTING_DATA; 1107 } 1108 break; 1109 case RVCR: 1110 s->data[0] = s->volatile_cfg & 0xFF; 1111 s->pos = 0; 1112 s->len = 1; 1113 s->state = STATE_READING_DATA; 1114 break; 1115 case WVCR: 1116 if (s->write_enable) { 1117 s->needed_bytes = 1; 1118 s->pos = 0; 1119 s->len = 0; 1120 s->state = STATE_COLLECTING_DATA; 1121 } 1122 break; 1123 case REVCR: 1124 s->data[0] = s->enh_volatile_cfg & 0xFF; 1125 s->pos = 0; 1126 s->len = 1; 1127 s->state = STATE_READING_DATA; 1128 break; 1129 case WEVCR: 1130 if (s->write_enable) { 1131 s->needed_bytes = 1; 1132 s->pos = 0; 1133 s->len = 0; 1134 s->state = STATE_COLLECTING_DATA; 1135 } 1136 break; 1137 case RESET_ENABLE: 1138 s->reset_enable = true; 1139 break; 1140 case RESET_MEMORY: 1141 if (s->reset_enable) { 1142 reset_memory(s); 1143 } 1144 break; 1145 case RDCR_EQIO: 1146 switch (get_man(s)) { 1147 case MAN_SPANSION: 1148 s->data[0] = (!!s->quad_enable) << 1; 1149 s->pos = 0; 1150 s->len = 1; 1151 s->state = STATE_READING_DATA; 1152 break; 1153 case MAN_MACRONIX: 1154 s->quad_enable = true; 1155 break; 1156 default: 1157 break; 1158 } 1159 break; 1160 case RSTQIO: 1161 s->quad_enable = false; 1162 break; 1163 default: 1164 qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Unknown cmd %x\n", value); 1165 break; 1166 } 1167 } 1168 1169 static int m25p80_cs(SSISlave *ss, bool select) 1170 { 1171 Flash *s = M25P80(ss); 1172 1173 if (select) { 1174 if (s->state == STATE_COLLECTING_VAR_LEN_DATA) { 1175 complete_collecting_data(s); 1176 } 1177 s->len = 0; 1178 s->pos = 0; 1179 s->state = STATE_IDLE; 1180 flash_sync_dirty(s, -1); 1181 s->data_read_loop = false; 1182 } 1183 1184 DB_PRINT_L(0, "%sselect\n", select ? "de" : ""); 1185 1186 return 0; 1187 } 1188 1189 static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx) 1190 { 1191 Flash *s = M25P80(ss); 1192 uint32_t r = 0; 1193 1194 switch (s->state) { 1195 1196 case STATE_PAGE_PROGRAM: 1197 DB_PRINT_L(1, "page program cur_addr=%#" PRIx32 " data=%" PRIx8 "\n", 1198 s->cur_addr, (uint8_t)tx); 1199 flash_write8(s, s->cur_addr, (uint8_t)tx); 1200 s->cur_addr = (s->cur_addr + 1) & (s->size - 1); 1201 break; 1202 1203 case STATE_READ: 1204 r = s->storage[s->cur_addr]; 1205 DB_PRINT_L(1, "READ 0x%" PRIx32 "=%" PRIx8 "\n", s->cur_addr, 1206 (uint8_t)r); 1207 s->cur_addr = (s->cur_addr + 1) & (s->size - 1); 1208 break; 1209 1210 case STATE_COLLECTING_DATA: 1211 case STATE_COLLECTING_VAR_LEN_DATA: 1212 1213 if (s->len >= M25P80_INTERNAL_DATA_BUFFER_SZ) { 1214 qemu_log_mask(LOG_GUEST_ERROR, 1215 "M25P80: Write overrun internal data buffer. " 1216 "SPI controller (QEMU emulator or guest driver) " 1217 "is misbehaving\n"); 1218 s->len = s->pos = 0; 1219 s->state = STATE_IDLE; 1220 break; 1221 } 1222 1223 s->data[s->len] = (uint8_t)tx; 1224 s->len++; 1225 1226 if (s->len == s->needed_bytes) { 1227 complete_collecting_data(s); 1228 } 1229 break; 1230 1231 case STATE_READING_DATA: 1232 1233 if (s->pos >= M25P80_INTERNAL_DATA_BUFFER_SZ) { 1234 qemu_log_mask(LOG_GUEST_ERROR, 1235 "M25P80: Read overrun internal data buffer. " 1236 "SPI controller (QEMU emulator or guest driver) " 1237 "is misbehaving\n"); 1238 s->len = s->pos = 0; 1239 s->state = STATE_IDLE; 1240 break; 1241 } 1242 1243 r = s->data[s->pos]; 1244 s->pos++; 1245 if (s->pos == s->len) { 1246 s->pos = 0; 1247 if (!s->data_read_loop) { 1248 s->state = STATE_IDLE; 1249 } 1250 } 1251 break; 1252 1253 default: 1254 case STATE_IDLE: 1255 decode_new_cmd(s, (uint8_t)tx); 1256 break; 1257 } 1258 1259 return r; 1260 } 1261 1262 static void m25p80_realize(SSISlave *ss, Error **errp) 1263 { 1264 Flash *s = M25P80(ss); 1265 M25P80Class *mc = M25P80_GET_CLASS(s); 1266 int ret; 1267 1268 s->pi = mc->pi; 1269 1270 s->size = s->pi->sector_size * s->pi->n_sectors; 1271 s->dirty_page = -1; 1272 1273 if (s->blk) { 1274 uint64_t perm = BLK_PERM_CONSISTENT_READ | 1275 (blk_is_read_only(s->blk) ? 0 : BLK_PERM_WRITE); 1276 ret = blk_set_perm(s->blk, perm, BLK_PERM_ALL, errp); 1277 if (ret < 0) { 1278 return; 1279 } 1280 1281 DB_PRINT_L(0, "Binding to IF_MTD drive\n"); 1282 s->storage = blk_blockalign(s->blk, s->size); 1283 1284 if (blk_pread(s->blk, 0, s->storage, s->size) != s->size) { 1285 error_setg(errp, "failed to read the initial flash content"); 1286 return; 1287 } 1288 } else { 1289 DB_PRINT_L(0, "No BDRV - binding to RAM\n"); 1290 s->storage = blk_blockalign(NULL, s->size); 1291 memset(s->storage, 0xFF, s->size); 1292 } 1293 } 1294 1295 static void m25p80_reset(DeviceState *d) 1296 { 1297 Flash *s = M25P80(d); 1298 1299 reset_memory(s); 1300 } 1301 1302 static int m25p80_pre_save(void *opaque) 1303 { 1304 flash_sync_dirty((Flash *)opaque, -1); 1305 1306 return 0; 1307 } 1308 1309 static Property m25p80_properties[] = { 1310 /* This is default value for Micron flash */ 1311 DEFINE_PROP_UINT32("nonvolatile-cfg", Flash, nonvolatile_cfg, 0x8FFF), 1312 DEFINE_PROP_UINT8("spansion-cr1nv", Flash, spansion_cr1nv, 0x0), 1313 DEFINE_PROP_UINT8("spansion-cr2nv", Flash, spansion_cr2nv, 0x8), 1314 DEFINE_PROP_UINT8("spansion-cr3nv", Flash, spansion_cr3nv, 0x2), 1315 DEFINE_PROP_UINT8("spansion-cr4nv", Flash, spansion_cr4nv, 0x10), 1316 DEFINE_PROP_DRIVE("drive", Flash, blk), 1317 DEFINE_PROP_END_OF_LIST(), 1318 }; 1319 1320 static int m25p80_pre_load(void *opaque) 1321 { 1322 Flash *s = (Flash *)opaque; 1323 1324 s->data_read_loop = false; 1325 return 0; 1326 } 1327 1328 static bool m25p80_data_read_loop_needed(void *opaque) 1329 { 1330 Flash *s = (Flash *)opaque; 1331 1332 return s->data_read_loop; 1333 } 1334 1335 static const VMStateDescription vmstate_m25p80_data_read_loop = { 1336 .name = "m25p80/data_read_loop", 1337 .version_id = 1, 1338 .minimum_version_id = 1, 1339 .needed = m25p80_data_read_loop_needed, 1340 .fields = (VMStateField[]) { 1341 VMSTATE_BOOL(data_read_loop, Flash), 1342 VMSTATE_END_OF_LIST() 1343 } 1344 }; 1345 1346 static const VMStateDescription vmstate_m25p80 = { 1347 .name = "m25p80", 1348 .version_id = 0, 1349 .minimum_version_id = 0, 1350 .pre_save = m25p80_pre_save, 1351 .pre_load = m25p80_pre_load, 1352 .fields = (VMStateField[]) { 1353 VMSTATE_UINT8(state, Flash), 1354 VMSTATE_UINT8_ARRAY(data, Flash, M25P80_INTERNAL_DATA_BUFFER_SZ), 1355 VMSTATE_UINT32(len, Flash), 1356 VMSTATE_UINT32(pos, Flash), 1357 VMSTATE_UINT8(needed_bytes, Flash), 1358 VMSTATE_UINT8(cmd_in_progress, Flash), 1359 VMSTATE_UINT32(cur_addr, Flash), 1360 VMSTATE_BOOL(write_enable, Flash), 1361 VMSTATE_BOOL(reset_enable, Flash), 1362 VMSTATE_UINT8(ear, Flash), 1363 VMSTATE_BOOL(four_bytes_address_mode, Flash), 1364 VMSTATE_UINT32(nonvolatile_cfg, Flash), 1365 VMSTATE_UINT32(volatile_cfg, Flash), 1366 VMSTATE_UINT32(enh_volatile_cfg, Flash), 1367 VMSTATE_BOOL(quad_enable, Flash), 1368 VMSTATE_UINT8(spansion_cr1nv, Flash), 1369 VMSTATE_UINT8(spansion_cr2nv, Flash), 1370 VMSTATE_UINT8(spansion_cr3nv, Flash), 1371 VMSTATE_UINT8(spansion_cr4nv, Flash), 1372 VMSTATE_END_OF_LIST() 1373 }, 1374 .subsections = (const VMStateDescription * []) { 1375 &vmstate_m25p80_data_read_loop, 1376 NULL 1377 } 1378 }; 1379 1380 static void m25p80_class_init(ObjectClass *klass, void *data) 1381 { 1382 DeviceClass *dc = DEVICE_CLASS(klass); 1383 SSISlaveClass *k = SSI_SLAVE_CLASS(klass); 1384 M25P80Class *mc = M25P80_CLASS(klass); 1385 1386 k->realize = m25p80_realize; 1387 k->transfer = m25p80_transfer8; 1388 k->set_cs = m25p80_cs; 1389 k->cs_polarity = SSI_CS_LOW; 1390 dc->vmsd = &vmstate_m25p80; 1391 dc->props = m25p80_properties; 1392 dc->reset = m25p80_reset; 1393 mc->pi = data; 1394 } 1395 1396 static const TypeInfo m25p80_info = { 1397 .name = TYPE_M25P80, 1398 .parent = TYPE_SSI_SLAVE, 1399 .instance_size = sizeof(Flash), 1400 .class_size = sizeof(M25P80Class), 1401 .abstract = true, 1402 }; 1403 1404 static void m25p80_register_types(void) 1405 { 1406 int i; 1407 1408 type_register_static(&m25p80_info); 1409 for (i = 0; i < ARRAY_SIZE(known_devices); ++i) { 1410 TypeInfo ti = { 1411 .name = known_devices[i].part_name, 1412 .parent = TYPE_M25P80, 1413 .class_init = m25p80_class_init, 1414 .class_data = (void *)&known_devices[i], 1415 }; 1416 type_register(&ti); 1417 } 1418 } 1419 1420 type_init(m25p80_register_types) 1421