1 /* 2 * QEMU Floppy disk emulator (Intel 82078) 3 * 4 * Copyright (c) 2003, 2007 Jocelyn Mayer 5 * Copyright (c) 2008 Hervé Poussineau 6 * 7 * Permission is hereby granted, free of charge, to any person obtaining a copy 8 * of this software and associated documentation files (the "Software"), to deal 9 * in the Software without restriction, including without limitation the rights 10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 11 * copies of the Software, and to permit persons to whom the Software is 12 * furnished to do so, subject to the following conditions: 13 * 14 * The above copyright notice and this permission notice shall be included in 15 * all copies or substantial portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 23 * THE SOFTWARE. 24 */ 25 /* 26 * The controller is used in Sun4m systems in a slightly different 27 * way. There are changes in DOR register and DMA is not available. 28 */ 29 30 #include "qemu/osdep.h" 31 #include "hw/block/fdc.h" 32 #include "qapi/error.h" 33 #include "qemu/error-report.h" 34 #include "qemu/timer.h" 35 #include "hw/irq.h" 36 #include "hw/isa/isa.h" 37 #include "hw/qdev-properties.h" 38 #include "hw/sysbus.h" 39 #include "migration/vmstate.h" 40 #include "hw/block/block.h" 41 #include "sysemu/block-backend.h" 42 #include "sysemu/blockdev.h" 43 #include "sysemu/sysemu.h" 44 #include "qemu/log.h" 45 #include "qemu/main-loop.h" 46 #include "qemu/module.h" 47 #include "trace.h" 48 49 /********************************************************/ 50 /* debug Floppy devices */ 51 52 #define DEBUG_FLOPPY 0 53 54 #define FLOPPY_DPRINTF(fmt, ...) \ 55 do { \ 56 if (DEBUG_FLOPPY) { \ 57 fprintf(stderr, "FLOPPY: " fmt , ## __VA_ARGS__); \ 58 } \ 59 } while (0) 60 61 62 /********************************************************/ 63 /* qdev floppy bus */ 64 65 #define TYPE_FLOPPY_BUS "floppy-bus" 66 #define FLOPPY_BUS(obj) OBJECT_CHECK(FloppyBus, (obj), TYPE_FLOPPY_BUS) 67 68 typedef struct FDCtrl FDCtrl; 69 typedef struct FDrive FDrive; 70 static FDrive *get_drv(FDCtrl *fdctrl, int unit); 71 72 typedef struct FloppyBus { 73 BusState bus; 74 FDCtrl *fdc; 75 } FloppyBus; 76 77 static const TypeInfo floppy_bus_info = { 78 .name = TYPE_FLOPPY_BUS, 79 .parent = TYPE_BUS, 80 .instance_size = sizeof(FloppyBus), 81 }; 82 83 static void floppy_bus_create(FDCtrl *fdc, FloppyBus *bus, DeviceState *dev) 84 { 85 qbus_create_inplace(bus, sizeof(FloppyBus), TYPE_FLOPPY_BUS, dev, NULL); 86 bus->fdc = fdc; 87 } 88 89 90 /********************************************************/ 91 /* Floppy drive emulation */ 92 93 typedef enum FDriveRate { 94 FDRIVE_RATE_500K = 0x00, /* 500 Kbps */ 95 FDRIVE_RATE_300K = 0x01, /* 300 Kbps */ 96 FDRIVE_RATE_250K = 0x02, /* 250 Kbps */ 97 FDRIVE_RATE_1M = 0x03, /* 1 Mbps */ 98 } FDriveRate; 99 100 typedef enum FDriveSize { 101 FDRIVE_SIZE_UNKNOWN, 102 FDRIVE_SIZE_350, 103 FDRIVE_SIZE_525, 104 } FDriveSize; 105 106 typedef struct FDFormat { 107 FloppyDriveType drive; 108 uint8_t last_sect; 109 uint8_t max_track; 110 uint8_t max_head; 111 FDriveRate rate; 112 } FDFormat; 113 114 /* In many cases, the total sector size of a format is enough to uniquely 115 * identify it. However, there are some total sector collisions between 116 * formats of different physical size, and these are noted below by 117 * highlighting the total sector size for entries with collisions. */ 118 static const FDFormat fd_formats[] = { 119 /* First entry is default format */ 120 /* 1.44 MB 3"1/2 floppy disks */ 121 { FLOPPY_DRIVE_TYPE_144, 18, 80, 1, FDRIVE_RATE_500K, }, /* 3.5" 2880 */ 122 { FLOPPY_DRIVE_TYPE_144, 20, 80, 1, FDRIVE_RATE_500K, }, /* 3.5" 3200 */ 123 { FLOPPY_DRIVE_TYPE_144, 21, 80, 1, FDRIVE_RATE_500K, }, 124 { FLOPPY_DRIVE_TYPE_144, 21, 82, 1, FDRIVE_RATE_500K, }, 125 { FLOPPY_DRIVE_TYPE_144, 21, 83, 1, FDRIVE_RATE_500K, }, 126 { FLOPPY_DRIVE_TYPE_144, 22, 80, 1, FDRIVE_RATE_500K, }, 127 { FLOPPY_DRIVE_TYPE_144, 23, 80, 1, FDRIVE_RATE_500K, }, 128 { FLOPPY_DRIVE_TYPE_144, 24, 80, 1, FDRIVE_RATE_500K, }, 129 /* 2.88 MB 3"1/2 floppy disks */ 130 { FLOPPY_DRIVE_TYPE_288, 36, 80, 1, FDRIVE_RATE_1M, }, 131 { FLOPPY_DRIVE_TYPE_288, 39, 80, 1, FDRIVE_RATE_1M, }, 132 { FLOPPY_DRIVE_TYPE_288, 40, 80, 1, FDRIVE_RATE_1M, }, 133 { FLOPPY_DRIVE_TYPE_288, 44, 80, 1, FDRIVE_RATE_1M, }, 134 { FLOPPY_DRIVE_TYPE_288, 48, 80, 1, FDRIVE_RATE_1M, }, 135 /* 720 kB 3"1/2 floppy disks */ 136 { FLOPPY_DRIVE_TYPE_144, 9, 80, 1, FDRIVE_RATE_250K, }, /* 3.5" 1440 */ 137 { FLOPPY_DRIVE_TYPE_144, 10, 80, 1, FDRIVE_RATE_250K, }, 138 { FLOPPY_DRIVE_TYPE_144, 10, 82, 1, FDRIVE_RATE_250K, }, 139 { FLOPPY_DRIVE_TYPE_144, 10, 83, 1, FDRIVE_RATE_250K, }, 140 { FLOPPY_DRIVE_TYPE_144, 13, 80, 1, FDRIVE_RATE_250K, }, 141 { FLOPPY_DRIVE_TYPE_144, 14, 80, 1, FDRIVE_RATE_250K, }, 142 /* 1.2 MB 5"1/4 floppy disks */ 143 { FLOPPY_DRIVE_TYPE_120, 15, 80, 1, FDRIVE_RATE_500K, }, 144 { FLOPPY_DRIVE_TYPE_120, 18, 80, 1, FDRIVE_RATE_500K, }, /* 5.25" 2880 */ 145 { FLOPPY_DRIVE_TYPE_120, 18, 82, 1, FDRIVE_RATE_500K, }, 146 { FLOPPY_DRIVE_TYPE_120, 18, 83, 1, FDRIVE_RATE_500K, }, 147 { FLOPPY_DRIVE_TYPE_120, 20, 80, 1, FDRIVE_RATE_500K, }, /* 5.25" 3200 */ 148 /* 720 kB 5"1/4 floppy disks */ 149 { FLOPPY_DRIVE_TYPE_120, 9, 80, 1, FDRIVE_RATE_250K, }, /* 5.25" 1440 */ 150 { FLOPPY_DRIVE_TYPE_120, 11, 80, 1, FDRIVE_RATE_250K, }, 151 /* 360 kB 5"1/4 floppy disks */ 152 { FLOPPY_DRIVE_TYPE_120, 9, 40, 1, FDRIVE_RATE_300K, }, /* 5.25" 720 */ 153 { FLOPPY_DRIVE_TYPE_120, 9, 40, 0, FDRIVE_RATE_300K, }, 154 { FLOPPY_DRIVE_TYPE_120, 10, 41, 1, FDRIVE_RATE_300K, }, 155 { FLOPPY_DRIVE_TYPE_120, 10, 42, 1, FDRIVE_RATE_300K, }, 156 /* 320 kB 5"1/4 floppy disks */ 157 { FLOPPY_DRIVE_TYPE_120, 8, 40, 1, FDRIVE_RATE_250K, }, 158 { FLOPPY_DRIVE_TYPE_120, 8, 40, 0, FDRIVE_RATE_250K, }, 159 /* 360 kB must match 5"1/4 better than 3"1/2... */ 160 { FLOPPY_DRIVE_TYPE_144, 9, 80, 0, FDRIVE_RATE_250K, }, /* 3.5" 720 */ 161 /* end */ 162 { FLOPPY_DRIVE_TYPE_NONE, -1, -1, 0, 0, }, 163 }; 164 165 static FDriveSize drive_size(FloppyDriveType drive) 166 { 167 switch (drive) { 168 case FLOPPY_DRIVE_TYPE_120: 169 return FDRIVE_SIZE_525; 170 case FLOPPY_DRIVE_TYPE_144: 171 case FLOPPY_DRIVE_TYPE_288: 172 return FDRIVE_SIZE_350; 173 default: 174 return FDRIVE_SIZE_UNKNOWN; 175 } 176 } 177 178 #define GET_CUR_DRV(fdctrl) ((fdctrl)->cur_drv) 179 #define SET_CUR_DRV(fdctrl, drive) ((fdctrl)->cur_drv = (drive)) 180 181 /* Will always be a fixed parameter for us */ 182 #define FD_SECTOR_LEN 512 183 #define FD_SECTOR_SC 2 /* Sector size code */ 184 #define FD_RESET_SENSEI_COUNT 4 /* Number of sense interrupts on RESET */ 185 186 /* Floppy disk drive emulation */ 187 typedef enum FDiskFlags { 188 FDISK_DBL_SIDES = 0x01, 189 } FDiskFlags; 190 191 struct FDrive { 192 FDCtrl *fdctrl; 193 BlockBackend *blk; 194 BlockConf *conf; 195 /* Drive status */ 196 FloppyDriveType drive; /* CMOS drive type */ 197 uint8_t perpendicular; /* 2.88 MB access mode */ 198 /* Position */ 199 uint8_t head; 200 uint8_t track; 201 uint8_t sect; 202 /* Media */ 203 FloppyDriveType disk; /* Current disk type */ 204 FDiskFlags flags; 205 uint8_t last_sect; /* Nb sector per track */ 206 uint8_t max_track; /* Nb of tracks */ 207 uint16_t bps; /* Bytes per sector */ 208 uint8_t ro; /* Is read-only */ 209 uint8_t media_changed; /* Is media changed */ 210 uint8_t media_rate; /* Data rate of medium */ 211 212 bool media_validated; /* Have we validated the media? */ 213 }; 214 215 216 static FloppyDriveType get_fallback_drive_type(FDrive *drv); 217 218 /* Hack: FD_SEEK is expected to work on empty drives. However, QEMU 219 * currently goes through some pains to keep seeks within the bounds 220 * established by last_sect and max_track. Correcting this is difficult, 221 * as refactoring FDC code tends to expose nasty bugs in the Linux kernel. 222 * 223 * For now: allow empty drives to have large bounds so we can seek around, 224 * with the understanding that when a diskette is inserted, the bounds will 225 * properly tighten to match the geometry of that inserted medium. 226 */ 227 static void fd_empty_seek_hack(FDrive *drv) 228 { 229 drv->last_sect = 0xFF; 230 drv->max_track = 0xFF; 231 } 232 233 static void fd_init(FDrive *drv) 234 { 235 /* Drive */ 236 drv->perpendicular = 0; 237 /* Disk */ 238 drv->disk = FLOPPY_DRIVE_TYPE_NONE; 239 drv->last_sect = 0; 240 drv->max_track = 0; 241 drv->ro = true; 242 drv->media_changed = 1; 243 } 244 245 #define NUM_SIDES(drv) ((drv)->flags & FDISK_DBL_SIDES ? 2 : 1) 246 247 static int fd_sector_calc(uint8_t head, uint8_t track, uint8_t sect, 248 uint8_t last_sect, uint8_t num_sides) 249 { 250 return (((track * num_sides) + head) * last_sect) + sect - 1; 251 } 252 253 /* Returns current position, in sectors, for given drive */ 254 static int fd_sector(FDrive *drv) 255 { 256 return fd_sector_calc(drv->head, drv->track, drv->sect, drv->last_sect, 257 NUM_SIDES(drv)); 258 } 259 260 /* Returns current position, in bytes, for given drive */ 261 static int fd_offset(FDrive *drv) 262 { 263 g_assert(fd_sector(drv) < INT_MAX >> BDRV_SECTOR_BITS); 264 return fd_sector(drv) << BDRV_SECTOR_BITS; 265 } 266 267 /* Seek to a new position: 268 * returns 0 if already on right track 269 * returns 1 if track changed 270 * returns 2 if track is invalid 271 * returns 3 if sector is invalid 272 * returns 4 if seek is disabled 273 */ 274 static int fd_seek(FDrive *drv, uint8_t head, uint8_t track, uint8_t sect, 275 int enable_seek) 276 { 277 uint32_t sector; 278 int ret; 279 280 if (track > drv->max_track || 281 (head != 0 && (drv->flags & FDISK_DBL_SIDES) == 0)) { 282 FLOPPY_DPRINTF("try to read %d %02x %02x (max=%d %d %02x %02x)\n", 283 head, track, sect, 1, 284 (drv->flags & FDISK_DBL_SIDES) == 0 ? 0 : 1, 285 drv->max_track, drv->last_sect); 286 return 2; 287 } 288 if (sect > drv->last_sect) { 289 FLOPPY_DPRINTF("try to read %d %02x %02x (max=%d %d %02x %02x)\n", 290 head, track, sect, 1, 291 (drv->flags & FDISK_DBL_SIDES) == 0 ? 0 : 1, 292 drv->max_track, drv->last_sect); 293 return 3; 294 } 295 sector = fd_sector_calc(head, track, sect, drv->last_sect, NUM_SIDES(drv)); 296 ret = 0; 297 if (sector != fd_sector(drv)) { 298 #if 0 299 if (!enable_seek) { 300 FLOPPY_DPRINTF("error: no implicit seek %d %02x %02x" 301 " (max=%d %02x %02x)\n", 302 head, track, sect, 1, drv->max_track, 303 drv->last_sect); 304 return 4; 305 } 306 #endif 307 drv->head = head; 308 if (drv->track != track) { 309 if (drv->blk != NULL && blk_is_inserted(drv->blk)) { 310 drv->media_changed = 0; 311 } 312 ret = 1; 313 } 314 drv->track = track; 315 drv->sect = sect; 316 } 317 318 if (drv->blk == NULL || !blk_is_inserted(drv->blk)) { 319 ret = 2; 320 } 321 322 return ret; 323 } 324 325 /* Set drive back to track 0 */ 326 static void fd_recalibrate(FDrive *drv) 327 { 328 FLOPPY_DPRINTF("recalibrate\n"); 329 fd_seek(drv, 0, 0, 1, 1); 330 } 331 332 /** 333 * Determine geometry based on inserted diskette. 334 * Will not operate on an empty drive. 335 * 336 * @return: 0 on success, -1 if the drive is empty. 337 */ 338 static int pick_geometry(FDrive *drv) 339 { 340 BlockBackend *blk = drv->blk; 341 const FDFormat *parse; 342 uint64_t nb_sectors, size; 343 int i; 344 int match, size_match, type_match; 345 bool magic = drv->drive == FLOPPY_DRIVE_TYPE_AUTO; 346 347 /* We can only pick a geometry if we have a diskette. */ 348 if (!drv->blk || !blk_is_inserted(drv->blk) || 349 drv->drive == FLOPPY_DRIVE_TYPE_NONE) 350 { 351 return -1; 352 } 353 354 /* We need to determine the likely geometry of the inserted medium. 355 * In order of preference, we look for: 356 * (1) The same drive type and number of sectors, 357 * (2) The same diskette size and number of sectors, 358 * (3) The same drive type. 359 * 360 * In all cases, matches that occur higher in the drive table will take 361 * precedence over matches that occur later in the table. 362 */ 363 blk_get_geometry(blk, &nb_sectors); 364 match = size_match = type_match = -1; 365 for (i = 0; ; i++) { 366 parse = &fd_formats[i]; 367 if (parse->drive == FLOPPY_DRIVE_TYPE_NONE) { 368 break; 369 } 370 size = (parse->max_head + 1) * parse->max_track * parse->last_sect; 371 if (nb_sectors == size) { 372 if (magic || parse->drive == drv->drive) { 373 /* (1) perfect match -- nb_sectors and drive type */ 374 goto out; 375 } else if (drive_size(parse->drive) == drive_size(drv->drive)) { 376 /* (2) size match -- nb_sectors and physical medium size */ 377 match = (match == -1) ? i : match; 378 } else { 379 /* This is suspicious -- Did the user misconfigure? */ 380 size_match = (size_match == -1) ? i : size_match; 381 } 382 } else if (type_match == -1) { 383 if ((parse->drive == drv->drive) || 384 (magic && (parse->drive == get_fallback_drive_type(drv)))) { 385 /* (3) type match -- nb_sectors mismatch, but matches the type 386 * specified explicitly by the user, or matches the fallback 387 * default type when using the drive autodetect mechanism */ 388 type_match = i; 389 } 390 } 391 } 392 393 /* No exact match found */ 394 if (match == -1) { 395 if (size_match != -1) { 396 parse = &fd_formats[size_match]; 397 FLOPPY_DPRINTF("User requested floppy drive type '%s', " 398 "but inserted medium appears to be a " 399 "%"PRId64" sector '%s' type\n", 400 FloppyDriveType_str(drv->drive), 401 nb_sectors, 402 FloppyDriveType_str(parse->drive)); 403 } 404 assert(type_match != -1 && "misconfigured fd_format"); 405 match = type_match; 406 } 407 parse = &(fd_formats[match]); 408 409 out: 410 if (parse->max_head == 0) { 411 drv->flags &= ~FDISK_DBL_SIDES; 412 } else { 413 drv->flags |= FDISK_DBL_SIDES; 414 } 415 drv->max_track = parse->max_track; 416 drv->last_sect = parse->last_sect; 417 drv->disk = parse->drive; 418 drv->media_rate = parse->rate; 419 return 0; 420 } 421 422 static void pick_drive_type(FDrive *drv) 423 { 424 if (drv->drive != FLOPPY_DRIVE_TYPE_AUTO) { 425 return; 426 } 427 428 if (pick_geometry(drv) == 0) { 429 drv->drive = drv->disk; 430 } else { 431 drv->drive = get_fallback_drive_type(drv); 432 } 433 434 g_assert(drv->drive != FLOPPY_DRIVE_TYPE_AUTO); 435 } 436 437 /* Revalidate a disk drive after a disk change */ 438 static void fd_revalidate(FDrive *drv) 439 { 440 int rc; 441 442 FLOPPY_DPRINTF("revalidate\n"); 443 if (drv->blk != NULL) { 444 drv->ro = blk_is_read_only(drv->blk); 445 if (!blk_is_inserted(drv->blk)) { 446 FLOPPY_DPRINTF("No disk in drive\n"); 447 drv->disk = FLOPPY_DRIVE_TYPE_NONE; 448 fd_empty_seek_hack(drv); 449 } else if (!drv->media_validated) { 450 rc = pick_geometry(drv); 451 if (rc) { 452 FLOPPY_DPRINTF("Could not validate floppy drive media"); 453 } else { 454 drv->media_validated = true; 455 FLOPPY_DPRINTF("Floppy disk (%d h %d t %d s) %s\n", 456 (drv->flags & FDISK_DBL_SIDES) ? 2 : 1, 457 drv->max_track, drv->last_sect, 458 drv->ro ? "ro" : "rw"); 459 } 460 } 461 } else { 462 FLOPPY_DPRINTF("No drive connected\n"); 463 drv->last_sect = 0; 464 drv->max_track = 0; 465 drv->flags &= ~FDISK_DBL_SIDES; 466 drv->drive = FLOPPY_DRIVE_TYPE_NONE; 467 drv->disk = FLOPPY_DRIVE_TYPE_NONE; 468 } 469 } 470 471 static void fd_change_cb(void *opaque, bool load, Error **errp) 472 { 473 FDrive *drive = opaque; 474 475 if (!load) { 476 blk_set_perm(drive->blk, 0, BLK_PERM_ALL, &error_abort); 477 } else { 478 if (!blkconf_apply_backend_options(drive->conf, 479 blk_is_read_only(drive->blk), false, 480 errp)) { 481 return; 482 } 483 } 484 485 drive->media_changed = 1; 486 drive->media_validated = false; 487 fd_revalidate(drive); 488 } 489 490 static const BlockDevOps fd_block_ops = { 491 .change_media_cb = fd_change_cb, 492 }; 493 494 495 #define TYPE_FLOPPY_DRIVE "floppy" 496 #define FLOPPY_DRIVE(obj) \ 497 OBJECT_CHECK(FloppyDrive, (obj), TYPE_FLOPPY_DRIVE) 498 499 typedef struct FloppyDrive { 500 DeviceState qdev; 501 uint32_t unit; 502 BlockConf conf; 503 FloppyDriveType type; 504 } FloppyDrive; 505 506 static Property floppy_drive_properties[] = { 507 DEFINE_PROP_UINT32("unit", FloppyDrive, unit, -1), 508 DEFINE_BLOCK_PROPERTIES(FloppyDrive, conf), 509 DEFINE_PROP_SIGNED("drive-type", FloppyDrive, type, 510 FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type, 511 FloppyDriveType), 512 DEFINE_PROP_END_OF_LIST(), 513 }; 514 515 static void floppy_drive_realize(DeviceState *qdev, Error **errp) 516 { 517 FloppyDrive *dev = FLOPPY_DRIVE(qdev); 518 FloppyBus *bus = FLOPPY_BUS(qdev->parent_bus); 519 FDrive *drive; 520 bool read_only; 521 int ret; 522 523 if (dev->unit == -1) { 524 for (dev->unit = 0; dev->unit < MAX_FD; dev->unit++) { 525 drive = get_drv(bus->fdc, dev->unit); 526 if (!drive->blk) { 527 break; 528 } 529 } 530 } 531 532 if (dev->unit >= MAX_FD) { 533 error_setg(errp, "Can't create floppy unit %d, bus supports " 534 "only %d units", dev->unit, MAX_FD); 535 return; 536 } 537 538 drive = get_drv(bus->fdc, dev->unit); 539 if (drive->blk) { 540 error_setg(errp, "Floppy unit %d is in use", dev->unit); 541 return; 542 } 543 544 if (!dev->conf.blk) { 545 /* Anonymous BlockBackend for an empty drive */ 546 dev->conf.blk = blk_new(qemu_get_aio_context(), 0, BLK_PERM_ALL); 547 ret = blk_attach_dev(dev->conf.blk, qdev); 548 assert(ret == 0); 549 550 /* Don't take write permissions on an empty drive to allow attaching a 551 * read-only node later */ 552 read_only = true; 553 } else { 554 read_only = !blk_bs(dev->conf.blk) || blk_is_read_only(dev->conf.blk); 555 } 556 557 blkconf_blocksizes(&dev->conf); 558 if (dev->conf.logical_block_size != 512 || 559 dev->conf.physical_block_size != 512) 560 { 561 error_setg(errp, "Physical and logical block size must " 562 "be 512 for floppy"); 563 return; 564 } 565 566 /* rerror/werror aren't supported by fdc and therefore not even registered 567 * with qdev. So set the defaults manually before they are used in 568 * blkconf_apply_backend_options(). */ 569 dev->conf.rerror = BLOCKDEV_ON_ERROR_AUTO; 570 dev->conf.werror = BLOCKDEV_ON_ERROR_AUTO; 571 572 if (!blkconf_apply_backend_options(&dev->conf, read_only, false, errp)) { 573 return; 574 } 575 576 /* 'enospc' is the default for -drive, 'report' is what blk_new() gives us 577 * for empty drives. */ 578 if (blk_get_on_error(dev->conf.blk, 0) != BLOCKDEV_ON_ERROR_ENOSPC && 579 blk_get_on_error(dev->conf.blk, 0) != BLOCKDEV_ON_ERROR_REPORT) { 580 error_setg(errp, "fdc doesn't support drive option werror"); 581 return; 582 } 583 if (blk_get_on_error(dev->conf.blk, 1) != BLOCKDEV_ON_ERROR_REPORT) { 584 error_setg(errp, "fdc doesn't support drive option rerror"); 585 return; 586 } 587 588 drive->conf = &dev->conf; 589 drive->blk = dev->conf.blk; 590 drive->fdctrl = bus->fdc; 591 592 fd_init(drive); 593 blk_set_dev_ops(drive->blk, &fd_block_ops, drive); 594 595 /* Keep 'type' qdev property and FDrive->drive in sync */ 596 drive->drive = dev->type; 597 pick_drive_type(drive); 598 dev->type = drive->drive; 599 600 fd_revalidate(drive); 601 } 602 603 static void floppy_drive_class_init(ObjectClass *klass, void *data) 604 { 605 DeviceClass *k = DEVICE_CLASS(klass); 606 k->realize = floppy_drive_realize; 607 set_bit(DEVICE_CATEGORY_STORAGE, k->categories); 608 k->bus_type = TYPE_FLOPPY_BUS; 609 device_class_set_props(k, floppy_drive_properties); 610 k->desc = "virtual floppy drive"; 611 } 612 613 static const TypeInfo floppy_drive_info = { 614 .name = TYPE_FLOPPY_DRIVE, 615 .parent = TYPE_DEVICE, 616 .instance_size = sizeof(FloppyDrive), 617 .class_init = floppy_drive_class_init, 618 }; 619 620 /********************************************************/ 621 /* Intel 82078 floppy disk controller emulation */ 622 623 static void fdctrl_reset(FDCtrl *fdctrl, int do_irq); 624 static void fdctrl_to_command_phase(FDCtrl *fdctrl); 625 static int fdctrl_transfer_handler (void *opaque, int nchan, 626 int dma_pos, int dma_len); 627 static void fdctrl_raise_irq(FDCtrl *fdctrl); 628 static FDrive *get_cur_drv(FDCtrl *fdctrl); 629 630 static uint32_t fdctrl_read_statusA(FDCtrl *fdctrl); 631 static uint32_t fdctrl_read_statusB(FDCtrl *fdctrl); 632 static uint32_t fdctrl_read_dor(FDCtrl *fdctrl); 633 static void fdctrl_write_dor(FDCtrl *fdctrl, uint32_t value); 634 static uint32_t fdctrl_read_tape(FDCtrl *fdctrl); 635 static void fdctrl_write_tape(FDCtrl *fdctrl, uint32_t value); 636 static uint32_t fdctrl_read_main_status(FDCtrl *fdctrl); 637 static void fdctrl_write_rate(FDCtrl *fdctrl, uint32_t value); 638 static uint32_t fdctrl_read_data(FDCtrl *fdctrl); 639 static void fdctrl_write_data(FDCtrl *fdctrl, uint32_t value); 640 static uint32_t fdctrl_read_dir(FDCtrl *fdctrl); 641 static void fdctrl_write_ccr(FDCtrl *fdctrl, uint32_t value); 642 643 enum { 644 FD_DIR_WRITE = 0, 645 FD_DIR_READ = 1, 646 FD_DIR_SCANE = 2, 647 FD_DIR_SCANL = 3, 648 FD_DIR_SCANH = 4, 649 FD_DIR_VERIFY = 5, 650 }; 651 652 enum { 653 FD_STATE_MULTI = 0x01, /* multi track flag */ 654 FD_STATE_FORMAT = 0x02, /* format flag */ 655 }; 656 657 enum { 658 FD_REG_SRA = 0x00, 659 FD_REG_SRB = 0x01, 660 FD_REG_DOR = 0x02, 661 FD_REG_TDR = 0x03, 662 FD_REG_MSR = 0x04, 663 FD_REG_DSR = 0x04, 664 FD_REG_FIFO = 0x05, 665 FD_REG_DIR = 0x07, 666 FD_REG_CCR = 0x07, 667 }; 668 669 enum { 670 FD_CMD_READ_TRACK = 0x02, 671 FD_CMD_SPECIFY = 0x03, 672 FD_CMD_SENSE_DRIVE_STATUS = 0x04, 673 FD_CMD_WRITE = 0x05, 674 FD_CMD_READ = 0x06, 675 FD_CMD_RECALIBRATE = 0x07, 676 FD_CMD_SENSE_INTERRUPT_STATUS = 0x08, 677 FD_CMD_WRITE_DELETED = 0x09, 678 FD_CMD_READ_ID = 0x0a, 679 FD_CMD_READ_DELETED = 0x0c, 680 FD_CMD_FORMAT_TRACK = 0x0d, 681 FD_CMD_DUMPREG = 0x0e, 682 FD_CMD_SEEK = 0x0f, 683 FD_CMD_VERSION = 0x10, 684 FD_CMD_SCAN_EQUAL = 0x11, 685 FD_CMD_PERPENDICULAR_MODE = 0x12, 686 FD_CMD_CONFIGURE = 0x13, 687 FD_CMD_LOCK = 0x14, 688 FD_CMD_VERIFY = 0x16, 689 FD_CMD_POWERDOWN_MODE = 0x17, 690 FD_CMD_PART_ID = 0x18, 691 FD_CMD_SCAN_LOW_OR_EQUAL = 0x19, 692 FD_CMD_SCAN_HIGH_OR_EQUAL = 0x1d, 693 FD_CMD_SAVE = 0x2e, 694 FD_CMD_OPTION = 0x33, 695 FD_CMD_RESTORE = 0x4e, 696 FD_CMD_DRIVE_SPECIFICATION_COMMAND = 0x8e, 697 FD_CMD_RELATIVE_SEEK_OUT = 0x8f, 698 FD_CMD_FORMAT_AND_WRITE = 0xcd, 699 FD_CMD_RELATIVE_SEEK_IN = 0xcf, 700 }; 701 702 enum { 703 FD_CONFIG_PRETRK = 0xff, /* Pre-compensation set to track 0 */ 704 FD_CONFIG_FIFOTHR = 0x0f, /* FIFO threshold set to 1 byte */ 705 FD_CONFIG_POLL = 0x10, /* Poll enabled */ 706 FD_CONFIG_EFIFO = 0x20, /* FIFO disabled */ 707 FD_CONFIG_EIS = 0x40, /* No implied seeks */ 708 }; 709 710 enum { 711 FD_SR0_DS0 = 0x01, 712 FD_SR0_DS1 = 0x02, 713 FD_SR0_HEAD = 0x04, 714 FD_SR0_EQPMT = 0x10, 715 FD_SR0_SEEK = 0x20, 716 FD_SR0_ABNTERM = 0x40, 717 FD_SR0_INVCMD = 0x80, 718 FD_SR0_RDYCHG = 0xc0, 719 }; 720 721 enum { 722 FD_SR1_MA = 0x01, /* Missing address mark */ 723 FD_SR1_NW = 0x02, /* Not writable */ 724 FD_SR1_EC = 0x80, /* End of cylinder */ 725 }; 726 727 enum { 728 FD_SR2_SNS = 0x04, /* Scan not satisfied */ 729 FD_SR2_SEH = 0x08, /* Scan equal hit */ 730 }; 731 732 enum { 733 FD_SRA_DIR = 0x01, 734 FD_SRA_nWP = 0x02, 735 FD_SRA_nINDX = 0x04, 736 FD_SRA_HDSEL = 0x08, 737 FD_SRA_nTRK0 = 0x10, 738 FD_SRA_STEP = 0x20, 739 FD_SRA_nDRV2 = 0x40, 740 FD_SRA_INTPEND = 0x80, 741 }; 742 743 enum { 744 FD_SRB_MTR0 = 0x01, 745 FD_SRB_MTR1 = 0x02, 746 FD_SRB_WGATE = 0x04, 747 FD_SRB_RDATA = 0x08, 748 FD_SRB_WDATA = 0x10, 749 FD_SRB_DR0 = 0x20, 750 }; 751 752 enum { 753 #if MAX_FD == 4 754 FD_DOR_SELMASK = 0x03, 755 #else 756 FD_DOR_SELMASK = 0x01, 757 #endif 758 FD_DOR_nRESET = 0x04, 759 FD_DOR_DMAEN = 0x08, 760 FD_DOR_MOTEN0 = 0x10, 761 FD_DOR_MOTEN1 = 0x20, 762 FD_DOR_MOTEN2 = 0x40, 763 FD_DOR_MOTEN3 = 0x80, 764 }; 765 766 enum { 767 #if MAX_FD == 4 768 FD_TDR_BOOTSEL = 0x0c, 769 #else 770 FD_TDR_BOOTSEL = 0x04, 771 #endif 772 }; 773 774 enum { 775 FD_DSR_DRATEMASK= 0x03, 776 FD_DSR_PWRDOWN = 0x40, 777 FD_DSR_SWRESET = 0x80, 778 }; 779 780 enum { 781 FD_MSR_DRV0BUSY = 0x01, 782 FD_MSR_DRV1BUSY = 0x02, 783 FD_MSR_DRV2BUSY = 0x04, 784 FD_MSR_DRV3BUSY = 0x08, 785 FD_MSR_CMDBUSY = 0x10, 786 FD_MSR_NONDMA = 0x20, 787 FD_MSR_DIO = 0x40, 788 FD_MSR_RQM = 0x80, 789 }; 790 791 enum { 792 FD_DIR_DSKCHG = 0x80, 793 }; 794 795 /* 796 * See chapter 5.0 "Controller phases" of the spec: 797 * 798 * Command phase: 799 * The host writes a command and its parameters into the FIFO. The command 800 * phase is completed when all parameters for the command have been supplied, 801 * and execution phase is entered. 802 * 803 * Execution phase: 804 * Data transfers, either DMA or non-DMA. For non-DMA transfers, the FIFO 805 * contains the payload now, otherwise it's unused. When all bytes of the 806 * required data have been transferred, the state is switched to either result 807 * phase (if the command produces status bytes) or directly back into the 808 * command phase for the next command. 809 * 810 * Result phase: 811 * The host reads out the FIFO, which contains one or more result bytes now. 812 */ 813 enum { 814 /* Only for migration: reconstruct phase from registers like qemu 2.3 */ 815 FD_PHASE_RECONSTRUCT = 0, 816 817 FD_PHASE_COMMAND = 1, 818 FD_PHASE_EXECUTION = 2, 819 FD_PHASE_RESULT = 3, 820 }; 821 822 #define FD_MULTI_TRACK(state) ((state) & FD_STATE_MULTI) 823 #define FD_FORMAT_CMD(state) ((state) & FD_STATE_FORMAT) 824 825 struct FDCtrl { 826 MemoryRegion iomem; 827 qemu_irq irq; 828 /* Controller state */ 829 QEMUTimer *result_timer; 830 int dma_chann; 831 uint8_t phase; 832 IsaDma *dma; 833 /* Controller's identification */ 834 uint8_t version; 835 /* HW */ 836 uint8_t sra; 837 uint8_t srb; 838 uint8_t dor; 839 uint8_t dor_vmstate; /* only used as temp during vmstate */ 840 uint8_t tdr; 841 uint8_t dsr; 842 uint8_t msr; 843 uint8_t cur_drv; 844 uint8_t status0; 845 uint8_t status1; 846 uint8_t status2; 847 /* Command FIFO */ 848 uint8_t *fifo; 849 int32_t fifo_size; 850 uint32_t data_pos; 851 uint32_t data_len; 852 uint8_t data_state; 853 uint8_t data_dir; 854 uint8_t eot; /* last wanted sector */ 855 /* States kept only to be returned back */ 856 /* precompensation */ 857 uint8_t precomp_trk; 858 uint8_t config; 859 uint8_t lock; 860 /* Power down config (also with status regB access mode */ 861 uint8_t pwrd; 862 /* Floppy drives */ 863 FloppyBus bus; 864 uint8_t num_floppies; 865 FDrive drives[MAX_FD]; 866 struct { 867 BlockBackend *blk; 868 FloppyDriveType type; 869 } qdev_for_drives[MAX_FD]; 870 int reset_sensei; 871 uint32_t check_media_rate; 872 FloppyDriveType fallback; /* type=auto failure fallback */ 873 /* Timers state */ 874 uint8_t timer0; 875 uint8_t timer1; 876 PortioList portio_list; 877 }; 878 879 static FloppyDriveType get_fallback_drive_type(FDrive *drv) 880 { 881 return drv->fdctrl->fallback; 882 } 883 884 #define TYPE_SYSBUS_FDC "base-sysbus-fdc" 885 #define SYSBUS_FDC(obj) OBJECT_CHECK(FDCtrlSysBus, (obj), TYPE_SYSBUS_FDC) 886 887 typedef struct FDCtrlSysBus { 888 /*< private >*/ 889 SysBusDevice parent_obj; 890 /*< public >*/ 891 892 struct FDCtrl state; 893 } FDCtrlSysBus; 894 895 #define ISA_FDC(obj) OBJECT_CHECK(FDCtrlISABus, (obj), TYPE_ISA_FDC) 896 897 typedef struct FDCtrlISABus { 898 ISADevice parent_obj; 899 900 uint32_t iobase; 901 uint32_t irq; 902 uint32_t dma; 903 struct FDCtrl state; 904 int32_t bootindexA; 905 int32_t bootindexB; 906 } FDCtrlISABus; 907 908 static uint32_t fdctrl_read (void *opaque, uint32_t reg) 909 { 910 FDCtrl *fdctrl = opaque; 911 uint32_t retval; 912 913 reg &= 7; 914 switch (reg) { 915 case FD_REG_SRA: 916 retval = fdctrl_read_statusA(fdctrl); 917 break; 918 case FD_REG_SRB: 919 retval = fdctrl_read_statusB(fdctrl); 920 break; 921 case FD_REG_DOR: 922 retval = fdctrl_read_dor(fdctrl); 923 break; 924 case FD_REG_TDR: 925 retval = fdctrl_read_tape(fdctrl); 926 break; 927 case FD_REG_MSR: 928 retval = fdctrl_read_main_status(fdctrl); 929 break; 930 case FD_REG_FIFO: 931 retval = fdctrl_read_data(fdctrl); 932 break; 933 case FD_REG_DIR: 934 retval = fdctrl_read_dir(fdctrl); 935 break; 936 default: 937 retval = (uint32_t)(-1); 938 break; 939 } 940 trace_fdc_ioport_read(reg, retval); 941 942 return retval; 943 } 944 945 static void fdctrl_write (void *opaque, uint32_t reg, uint32_t value) 946 { 947 FDCtrl *fdctrl = opaque; 948 949 reg &= 7; 950 trace_fdc_ioport_write(reg, value); 951 switch (reg) { 952 case FD_REG_DOR: 953 fdctrl_write_dor(fdctrl, value); 954 break; 955 case FD_REG_TDR: 956 fdctrl_write_tape(fdctrl, value); 957 break; 958 case FD_REG_DSR: 959 fdctrl_write_rate(fdctrl, value); 960 break; 961 case FD_REG_FIFO: 962 fdctrl_write_data(fdctrl, value); 963 break; 964 case FD_REG_CCR: 965 fdctrl_write_ccr(fdctrl, value); 966 break; 967 default: 968 break; 969 } 970 } 971 972 static uint64_t fdctrl_read_mem (void *opaque, hwaddr reg, 973 unsigned ize) 974 { 975 return fdctrl_read(opaque, (uint32_t)reg); 976 } 977 978 static void fdctrl_write_mem (void *opaque, hwaddr reg, 979 uint64_t value, unsigned size) 980 { 981 fdctrl_write(opaque, (uint32_t)reg, value); 982 } 983 984 static const MemoryRegionOps fdctrl_mem_ops = { 985 .read = fdctrl_read_mem, 986 .write = fdctrl_write_mem, 987 .endianness = DEVICE_NATIVE_ENDIAN, 988 }; 989 990 static const MemoryRegionOps fdctrl_mem_strict_ops = { 991 .read = fdctrl_read_mem, 992 .write = fdctrl_write_mem, 993 .endianness = DEVICE_NATIVE_ENDIAN, 994 .valid = { 995 .min_access_size = 1, 996 .max_access_size = 1, 997 }, 998 }; 999 1000 static bool fdrive_media_changed_needed(void *opaque) 1001 { 1002 FDrive *drive = opaque; 1003 1004 return (drive->blk != NULL && drive->media_changed != 1); 1005 } 1006 1007 static const VMStateDescription vmstate_fdrive_media_changed = { 1008 .name = "fdrive/media_changed", 1009 .version_id = 1, 1010 .minimum_version_id = 1, 1011 .needed = fdrive_media_changed_needed, 1012 .fields = (VMStateField[]) { 1013 VMSTATE_UINT8(media_changed, FDrive), 1014 VMSTATE_END_OF_LIST() 1015 } 1016 }; 1017 1018 static bool fdrive_media_rate_needed(void *opaque) 1019 { 1020 FDrive *drive = opaque; 1021 1022 return drive->fdctrl->check_media_rate; 1023 } 1024 1025 static const VMStateDescription vmstate_fdrive_media_rate = { 1026 .name = "fdrive/media_rate", 1027 .version_id = 1, 1028 .minimum_version_id = 1, 1029 .needed = fdrive_media_rate_needed, 1030 .fields = (VMStateField[]) { 1031 VMSTATE_UINT8(media_rate, FDrive), 1032 VMSTATE_END_OF_LIST() 1033 } 1034 }; 1035 1036 static bool fdrive_perpendicular_needed(void *opaque) 1037 { 1038 FDrive *drive = opaque; 1039 1040 return drive->perpendicular != 0; 1041 } 1042 1043 static const VMStateDescription vmstate_fdrive_perpendicular = { 1044 .name = "fdrive/perpendicular", 1045 .version_id = 1, 1046 .minimum_version_id = 1, 1047 .needed = fdrive_perpendicular_needed, 1048 .fields = (VMStateField[]) { 1049 VMSTATE_UINT8(perpendicular, FDrive), 1050 VMSTATE_END_OF_LIST() 1051 } 1052 }; 1053 1054 static int fdrive_post_load(void *opaque, int version_id) 1055 { 1056 fd_revalidate(opaque); 1057 return 0; 1058 } 1059 1060 static const VMStateDescription vmstate_fdrive = { 1061 .name = "fdrive", 1062 .version_id = 1, 1063 .minimum_version_id = 1, 1064 .post_load = fdrive_post_load, 1065 .fields = (VMStateField[]) { 1066 VMSTATE_UINT8(head, FDrive), 1067 VMSTATE_UINT8(track, FDrive), 1068 VMSTATE_UINT8(sect, FDrive), 1069 VMSTATE_END_OF_LIST() 1070 }, 1071 .subsections = (const VMStateDescription*[]) { 1072 &vmstate_fdrive_media_changed, 1073 &vmstate_fdrive_media_rate, 1074 &vmstate_fdrive_perpendicular, 1075 NULL 1076 } 1077 }; 1078 1079 /* 1080 * Reconstructs the phase from register values according to the logic that was 1081 * implemented in qemu 2.3. This is the default value that is used if the phase 1082 * subsection is not present on migration. 1083 * 1084 * Don't change this function to reflect newer qemu versions, it is part of 1085 * the migration ABI. 1086 */ 1087 static int reconstruct_phase(FDCtrl *fdctrl) 1088 { 1089 if (fdctrl->msr & FD_MSR_NONDMA) { 1090 return FD_PHASE_EXECUTION; 1091 } else if ((fdctrl->msr & FD_MSR_RQM) == 0) { 1092 /* qemu 2.3 disabled RQM only during DMA transfers */ 1093 return FD_PHASE_EXECUTION; 1094 } else if (fdctrl->msr & FD_MSR_DIO) { 1095 return FD_PHASE_RESULT; 1096 } else { 1097 return FD_PHASE_COMMAND; 1098 } 1099 } 1100 1101 static int fdc_pre_save(void *opaque) 1102 { 1103 FDCtrl *s = opaque; 1104 1105 s->dor_vmstate = s->dor | GET_CUR_DRV(s); 1106 1107 return 0; 1108 } 1109 1110 static int fdc_pre_load(void *opaque) 1111 { 1112 FDCtrl *s = opaque; 1113 s->phase = FD_PHASE_RECONSTRUCT; 1114 return 0; 1115 } 1116 1117 static int fdc_post_load(void *opaque, int version_id) 1118 { 1119 FDCtrl *s = opaque; 1120 1121 SET_CUR_DRV(s, s->dor_vmstate & FD_DOR_SELMASK); 1122 s->dor = s->dor_vmstate & ~FD_DOR_SELMASK; 1123 1124 if (s->phase == FD_PHASE_RECONSTRUCT) { 1125 s->phase = reconstruct_phase(s); 1126 } 1127 1128 return 0; 1129 } 1130 1131 static bool fdc_reset_sensei_needed(void *opaque) 1132 { 1133 FDCtrl *s = opaque; 1134 1135 return s->reset_sensei != 0; 1136 } 1137 1138 static const VMStateDescription vmstate_fdc_reset_sensei = { 1139 .name = "fdc/reset_sensei", 1140 .version_id = 1, 1141 .minimum_version_id = 1, 1142 .needed = fdc_reset_sensei_needed, 1143 .fields = (VMStateField[]) { 1144 VMSTATE_INT32(reset_sensei, FDCtrl), 1145 VMSTATE_END_OF_LIST() 1146 } 1147 }; 1148 1149 static bool fdc_result_timer_needed(void *opaque) 1150 { 1151 FDCtrl *s = opaque; 1152 1153 return timer_pending(s->result_timer); 1154 } 1155 1156 static const VMStateDescription vmstate_fdc_result_timer = { 1157 .name = "fdc/result_timer", 1158 .version_id = 1, 1159 .minimum_version_id = 1, 1160 .needed = fdc_result_timer_needed, 1161 .fields = (VMStateField[]) { 1162 VMSTATE_TIMER_PTR(result_timer, FDCtrl), 1163 VMSTATE_END_OF_LIST() 1164 } 1165 }; 1166 1167 static bool fdc_phase_needed(void *opaque) 1168 { 1169 FDCtrl *fdctrl = opaque; 1170 1171 return reconstruct_phase(fdctrl) != fdctrl->phase; 1172 } 1173 1174 static const VMStateDescription vmstate_fdc_phase = { 1175 .name = "fdc/phase", 1176 .version_id = 1, 1177 .minimum_version_id = 1, 1178 .needed = fdc_phase_needed, 1179 .fields = (VMStateField[]) { 1180 VMSTATE_UINT8(phase, FDCtrl), 1181 VMSTATE_END_OF_LIST() 1182 } 1183 }; 1184 1185 static const VMStateDescription vmstate_fdc = { 1186 .name = "fdc", 1187 .version_id = 2, 1188 .minimum_version_id = 2, 1189 .pre_save = fdc_pre_save, 1190 .pre_load = fdc_pre_load, 1191 .post_load = fdc_post_load, 1192 .fields = (VMStateField[]) { 1193 /* Controller State */ 1194 VMSTATE_UINT8(sra, FDCtrl), 1195 VMSTATE_UINT8(srb, FDCtrl), 1196 VMSTATE_UINT8(dor_vmstate, FDCtrl), 1197 VMSTATE_UINT8(tdr, FDCtrl), 1198 VMSTATE_UINT8(dsr, FDCtrl), 1199 VMSTATE_UINT8(msr, FDCtrl), 1200 VMSTATE_UINT8(status0, FDCtrl), 1201 VMSTATE_UINT8(status1, FDCtrl), 1202 VMSTATE_UINT8(status2, FDCtrl), 1203 /* Command FIFO */ 1204 VMSTATE_VARRAY_INT32(fifo, FDCtrl, fifo_size, 0, vmstate_info_uint8, 1205 uint8_t), 1206 VMSTATE_UINT32(data_pos, FDCtrl), 1207 VMSTATE_UINT32(data_len, FDCtrl), 1208 VMSTATE_UINT8(data_state, FDCtrl), 1209 VMSTATE_UINT8(data_dir, FDCtrl), 1210 VMSTATE_UINT8(eot, FDCtrl), 1211 /* States kept only to be returned back */ 1212 VMSTATE_UINT8(timer0, FDCtrl), 1213 VMSTATE_UINT8(timer1, FDCtrl), 1214 VMSTATE_UINT8(precomp_trk, FDCtrl), 1215 VMSTATE_UINT8(config, FDCtrl), 1216 VMSTATE_UINT8(lock, FDCtrl), 1217 VMSTATE_UINT8(pwrd, FDCtrl), 1218 VMSTATE_UINT8_EQUAL(num_floppies, FDCtrl, NULL), 1219 VMSTATE_STRUCT_ARRAY(drives, FDCtrl, MAX_FD, 1, 1220 vmstate_fdrive, FDrive), 1221 VMSTATE_END_OF_LIST() 1222 }, 1223 .subsections = (const VMStateDescription*[]) { 1224 &vmstate_fdc_reset_sensei, 1225 &vmstate_fdc_result_timer, 1226 &vmstate_fdc_phase, 1227 NULL 1228 } 1229 }; 1230 1231 static void fdctrl_external_reset_sysbus(DeviceState *d) 1232 { 1233 FDCtrlSysBus *sys = SYSBUS_FDC(d); 1234 FDCtrl *s = &sys->state; 1235 1236 fdctrl_reset(s, 0); 1237 } 1238 1239 static void fdctrl_external_reset_isa(DeviceState *d) 1240 { 1241 FDCtrlISABus *isa = ISA_FDC(d); 1242 FDCtrl *s = &isa->state; 1243 1244 fdctrl_reset(s, 0); 1245 } 1246 1247 static void fdctrl_handle_tc(void *opaque, int irq, int level) 1248 { 1249 //FDCtrl *s = opaque; 1250 1251 if (level) { 1252 // XXX 1253 FLOPPY_DPRINTF("TC pulsed\n"); 1254 } 1255 } 1256 1257 /* Change IRQ state */ 1258 static void fdctrl_reset_irq(FDCtrl *fdctrl) 1259 { 1260 fdctrl->status0 = 0; 1261 if (!(fdctrl->sra & FD_SRA_INTPEND)) 1262 return; 1263 FLOPPY_DPRINTF("Reset interrupt\n"); 1264 qemu_set_irq(fdctrl->irq, 0); 1265 fdctrl->sra &= ~FD_SRA_INTPEND; 1266 } 1267 1268 static void fdctrl_raise_irq(FDCtrl *fdctrl) 1269 { 1270 if (!(fdctrl->sra & FD_SRA_INTPEND)) { 1271 qemu_set_irq(fdctrl->irq, 1); 1272 fdctrl->sra |= FD_SRA_INTPEND; 1273 } 1274 1275 fdctrl->reset_sensei = 0; 1276 FLOPPY_DPRINTF("Set interrupt status to 0x%02x\n", fdctrl->status0); 1277 } 1278 1279 /* Reset controller */ 1280 static void fdctrl_reset(FDCtrl *fdctrl, int do_irq) 1281 { 1282 int i; 1283 1284 FLOPPY_DPRINTF("reset controller\n"); 1285 fdctrl_reset_irq(fdctrl); 1286 /* Initialise controller */ 1287 fdctrl->sra = 0; 1288 fdctrl->srb = 0xc0; 1289 if (!fdctrl->drives[1].blk) { 1290 fdctrl->sra |= FD_SRA_nDRV2; 1291 } 1292 fdctrl->cur_drv = 0; 1293 fdctrl->dor = FD_DOR_nRESET; 1294 fdctrl->dor |= (fdctrl->dma_chann != -1) ? FD_DOR_DMAEN : 0; 1295 fdctrl->msr = FD_MSR_RQM; 1296 fdctrl->reset_sensei = 0; 1297 timer_del(fdctrl->result_timer); 1298 /* FIFO state */ 1299 fdctrl->data_pos = 0; 1300 fdctrl->data_len = 0; 1301 fdctrl->data_state = 0; 1302 fdctrl->data_dir = FD_DIR_WRITE; 1303 for (i = 0; i < MAX_FD; i++) 1304 fd_recalibrate(&fdctrl->drives[i]); 1305 fdctrl_to_command_phase(fdctrl); 1306 if (do_irq) { 1307 fdctrl->status0 |= FD_SR0_RDYCHG; 1308 fdctrl_raise_irq(fdctrl); 1309 fdctrl->reset_sensei = FD_RESET_SENSEI_COUNT; 1310 } 1311 } 1312 1313 static inline FDrive *drv0(FDCtrl *fdctrl) 1314 { 1315 return &fdctrl->drives[(fdctrl->tdr & FD_TDR_BOOTSEL) >> 2]; 1316 } 1317 1318 static inline FDrive *drv1(FDCtrl *fdctrl) 1319 { 1320 if ((fdctrl->tdr & FD_TDR_BOOTSEL) < (1 << 2)) 1321 return &fdctrl->drives[1]; 1322 else 1323 return &fdctrl->drives[0]; 1324 } 1325 1326 #if MAX_FD == 4 1327 static inline FDrive *drv2(FDCtrl *fdctrl) 1328 { 1329 if ((fdctrl->tdr & FD_TDR_BOOTSEL) < (2 << 2)) 1330 return &fdctrl->drives[2]; 1331 else 1332 return &fdctrl->drives[1]; 1333 } 1334 1335 static inline FDrive *drv3(FDCtrl *fdctrl) 1336 { 1337 if ((fdctrl->tdr & FD_TDR_BOOTSEL) < (3 << 2)) 1338 return &fdctrl->drives[3]; 1339 else 1340 return &fdctrl->drives[2]; 1341 } 1342 #endif 1343 1344 static FDrive *get_drv(FDCtrl *fdctrl, int unit) 1345 { 1346 switch (unit) { 1347 case 0: return drv0(fdctrl); 1348 case 1: return drv1(fdctrl); 1349 #if MAX_FD == 4 1350 case 2: return drv2(fdctrl); 1351 case 3: return drv3(fdctrl); 1352 #endif 1353 default: return NULL; 1354 } 1355 } 1356 1357 static FDrive *get_cur_drv(FDCtrl *fdctrl) 1358 { 1359 return get_drv(fdctrl, fdctrl->cur_drv); 1360 } 1361 1362 /* Status A register : 0x00 (read-only) */ 1363 static uint32_t fdctrl_read_statusA(FDCtrl *fdctrl) 1364 { 1365 uint32_t retval = fdctrl->sra; 1366 1367 FLOPPY_DPRINTF("status register A: 0x%02x\n", retval); 1368 1369 return retval; 1370 } 1371 1372 /* Status B register : 0x01 (read-only) */ 1373 static uint32_t fdctrl_read_statusB(FDCtrl *fdctrl) 1374 { 1375 uint32_t retval = fdctrl->srb; 1376 1377 FLOPPY_DPRINTF("status register B: 0x%02x\n", retval); 1378 1379 return retval; 1380 } 1381 1382 /* Digital output register : 0x02 */ 1383 static uint32_t fdctrl_read_dor(FDCtrl *fdctrl) 1384 { 1385 uint32_t retval = fdctrl->dor; 1386 1387 /* Selected drive */ 1388 retval |= fdctrl->cur_drv; 1389 FLOPPY_DPRINTF("digital output register: 0x%02x\n", retval); 1390 1391 return retval; 1392 } 1393 1394 static void fdctrl_write_dor(FDCtrl *fdctrl, uint32_t value) 1395 { 1396 FLOPPY_DPRINTF("digital output register set to 0x%02x\n", value); 1397 1398 /* Motors */ 1399 if (value & FD_DOR_MOTEN0) 1400 fdctrl->srb |= FD_SRB_MTR0; 1401 else 1402 fdctrl->srb &= ~FD_SRB_MTR0; 1403 if (value & FD_DOR_MOTEN1) 1404 fdctrl->srb |= FD_SRB_MTR1; 1405 else 1406 fdctrl->srb &= ~FD_SRB_MTR1; 1407 1408 /* Drive */ 1409 if (value & 1) 1410 fdctrl->srb |= FD_SRB_DR0; 1411 else 1412 fdctrl->srb &= ~FD_SRB_DR0; 1413 1414 /* Reset */ 1415 if (!(value & FD_DOR_nRESET)) { 1416 if (fdctrl->dor & FD_DOR_nRESET) { 1417 FLOPPY_DPRINTF("controller enter RESET state\n"); 1418 } 1419 } else { 1420 if (!(fdctrl->dor & FD_DOR_nRESET)) { 1421 FLOPPY_DPRINTF("controller out of RESET state\n"); 1422 fdctrl_reset(fdctrl, 1); 1423 fdctrl->dsr &= ~FD_DSR_PWRDOWN; 1424 } 1425 } 1426 /* Selected drive */ 1427 fdctrl->cur_drv = value & FD_DOR_SELMASK; 1428 1429 fdctrl->dor = value; 1430 } 1431 1432 /* Tape drive register : 0x03 */ 1433 static uint32_t fdctrl_read_tape(FDCtrl *fdctrl) 1434 { 1435 uint32_t retval = fdctrl->tdr; 1436 1437 FLOPPY_DPRINTF("tape drive register: 0x%02x\n", retval); 1438 1439 return retval; 1440 } 1441 1442 static void fdctrl_write_tape(FDCtrl *fdctrl, uint32_t value) 1443 { 1444 /* Reset mode */ 1445 if (!(fdctrl->dor & FD_DOR_nRESET)) { 1446 FLOPPY_DPRINTF("Floppy controller in RESET state !\n"); 1447 return; 1448 } 1449 FLOPPY_DPRINTF("tape drive register set to 0x%02x\n", value); 1450 /* Disk boot selection indicator */ 1451 fdctrl->tdr = value & FD_TDR_BOOTSEL; 1452 /* Tape indicators: never allow */ 1453 } 1454 1455 /* Main status register : 0x04 (read) */ 1456 static uint32_t fdctrl_read_main_status(FDCtrl *fdctrl) 1457 { 1458 uint32_t retval = fdctrl->msr; 1459 1460 fdctrl->dsr &= ~FD_DSR_PWRDOWN; 1461 fdctrl->dor |= FD_DOR_nRESET; 1462 1463 FLOPPY_DPRINTF("main status register: 0x%02x\n", retval); 1464 1465 return retval; 1466 } 1467 1468 /* Data select rate register : 0x04 (write) */ 1469 static void fdctrl_write_rate(FDCtrl *fdctrl, uint32_t value) 1470 { 1471 /* Reset mode */ 1472 if (!(fdctrl->dor & FD_DOR_nRESET)) { 1473 FLOPPY_DPRINTF("Floppy controller in RESET state !\n"); 1474 return; 1475 } 1476 FLOPPY_DPRINTF("select rate register set to 0x%02x\n", value); 1477 /* Reset: autoclear */ 1478 if (value & FD_DSR_SWRESET) { 1479 fdctrl->dor &= ~FD_DOR_nRESET; 1480 fdctrl_reset(fdctrl, 1); 1481 fdctrl->dor |= FD_DOR_nRESET; 1482 } 1483 if (value & FD_DSR_PWRDOWN) { 1484 fdctrl_reset(fdctrl, 1); 1485 } 1486 fdctrl->dsr = value; 1487 } 1488 1489 /* Configuration control register: 0x07 (write) */ 1490 static void fdctrl_write_ccr(FDCtrl *fdctrl, uint32_t value) 1491 { 1492 /* Reset mode */ 1493 if (!(fdctrl->dor & FD_DOR_nRESET)) { 1494 FLOPPY_DPRINTF("Floppy controller in RESET state !\n"); 1495 return; 1496 } 1497 FLOPPY_DPRINTF("configuration control register set to 0x%02x\n", value); 1498 1499 /* Only the rate selection bits used in AT mode, and we 1500 * store those in the DSR. 1501 */ 1502 fdctrl->dsr = (fdctrl->dsr & ~FD_DSR_DRATEMASK) | 1503 (value & FD_DSR_DRATEMASK); 1504 } 1505 1506 static int fdctrl_media_changed(FDrive *drv) 1507 { 1508 return drv->media_changed; 1509 } 1510 1511 /* Digital input register : 0x07 (read-only) */ 1512 static uint32_t fdctrl_read_dir(FDCtrl *fdctrl) 1513 { 1514 uint32_t retval = 0; 1515 1516 if (fdctrl_media_changed(get_cur_drv(fdctrl))) { 1517 retval |= FD_DIR_DSKCHG; 1518 } 1519 if (retval != 0) { 1520 FLOPPY_DPRINTF("Floppy digital input register: 0x%02x\n", retval); 1521 } 1522 1523 return retval; 1524 } 1525 1526 /* Clear the FIFO and update the state for receiving the next command */ 1527 static void fdctrl_to_command_phase(FDCtrl *fdctrl) 1528 { 1529 fdctrl->phase = FD_PHASE_COMMAND; 1530 fdctrl->data_dir = FD_DIR_WRITE; 1531 fdctrl->data_pos = 0; 1532 fdctrl->data_len = 1; /* Accept command byte, adjust for params later */ 1533 fdctrl->msr &= ~(FD_MSR_CMDBUSY | FD_MSR_DIO); 1534 fdctrl->msr |= FD_MSR_RQM; 1535 } 1536 1537 /* Update the state to allow the guest to read out the command status. 1538 * @fifo_len is the number of result bytes to be read out. */ 1539 static void fdctrl_to_result_phase(FDCtrl *fdctrl, int fifo_len) 1540 { 1541 fdctrl->phase = FD_PHASE_RESULT; 1542 fdctrl->data_dir = FD_DIR_READ; 1543 fdctrl->data_len = fifo_len; 1544 fdctrl->data_pos = 0; 1545 fdctrl->msr |= FD_MSR_CMDBUSY | FD_MSR_RQM | FD_MSR_DIO; 1546 } 1547 1548 /* Set an error: unimplemented/unknown command */ 1549 static void fdctrl_unimplemented(FDCtrl *fdctrl, int direction) 1550 { 1551 qemu_log_mask(LOG_UNIMP, "fdc: unimplemented command 0x%02x\n", 1552 fdctrl->fifo[0]); 1553 fdctrl->fifo[0] = FD_SR0_INVCMD; 1554 fdctrl_to_result_phase(fdctrl, 1); 1555 } 1556 1557 /* Seek to next sector 1558 * returns 0 when end of track reached (for DBL_SIDES on head 1) 1559 * otherwise returns 1 1560 */ 1561 static int fdctrl_seek_to_next_sect(FDCtrl *fdctrl, FDrive *cur_drv) 1562 { 1563 FLOPPY_DPRINTF("seek to next sector (%d %02x %02x => %d)\n", 1564 cur_drv->head, cur_drv->track, cur_drv->sect, 1565 fd_sector(cur_drv)); 1566 /* XXX: cur_drv->sect >= cur_drv->last_sect should be an 1567 error in fact */ 1568 uint8_t new_head = cur_drv->head; 1569 uint8_t new_track = cur_drv->track; 1570 uint8_t new_sect = cur_drv->sect; 1571 1572 int ret = 1; 1573 1574 if (new_sect >= cur_drv->last_sect || 1575 new_sect == fdctrl->eot) { 1576 new_sect = 1; 1577 if (FD_MULTI_TRACK(fdctrl->data_state)) { 1578 if (new_head == 0 && 1579 (cur_drv->flags & FDISK_DBL_SIDES) != 0) { 1580 new_head = 1; 1581 } else { 1582 new_head = 0; 1583 new_track++; 1584 fdctrl->status0 |= FD_SR0_SEEK; 1585 if ((cur_drv->flags & FDISK_DBL_SIDES) == 0) { 1586 ret = 0; 1587 } 1588 } 1589 } else { 1590 fdctrl->status0 |= FD_SR0_SEEK; 1591 new_track++; 1592 ret = 0; 1593 } 1594 if (ret == 1) { 1595 FLOPPY_DPRINTF("seek to next track (%d %02x %02x => %d)\n", 1596 new_head, new_track, new_sect, fd_sector(cur_drv)); 1597 } 1598 } else { 1599 new_sect++; 1600 } 1601 fd_seek(cur_drv, new_head, new_track, new_sect, 1); 1602 return ret; 1603 } 1604 1605 /* Callback for transfer end (stop or abort) */ 1606 static void fdctrl_stop_transfer(FDCtrl *fdctrl, uint8_t status0, 1607 uint8_t status1, uint8_t status2) 1608 { 1609 FDrive *cur_drv; 1610 cur_drv = get_cur_drv(fdctrl); 1611 1612 fdctrl->status0 &= ~(FD_SR0_DS0 | FD_SR0_DS1 | FD_SR0_HEAD); 1613 fdctrl->status0 |= GET_CUR_DRV(fdctrl); 1614 if (cur_drv->head) { 1615 fdctrl->status0 |= FD_SR0_HEAD; 1616 } 1617 fdctrl->status0 |= status0; 1618 1619 FLOPPY_DPRINTF("transfer status: %02x %02x %02x (%02x)\n", 1620 status0, status1, status2, fdctrl->status0); 1621 fdctrl->fifo[0] = fdctrl->status0; 1622 fdctrl->fifo[1] = status1; 1623 fdctrl->fifo[2] = status2; 1624 fdctrl->fifo[3] = cur_drv->track; 1625 fdctrl->fifo[4] = cur_drv->head; 1626 fdctrl->fifo[5] = cur_drv->sect; 1627 fdctrl->fifo[6] = FD_SECTOR_SC; 1628 fdctrl->data_dir = FD_DIR_READ; 1629 if (fdctrl->dma_chann != -1 && !(fdctrl->msr & FD_MSR_NONDMA)) { 1630 IsaDmaClass *k = ISADMA_GET_CLASS(fdctrl->dma); 1631 k->release_DREQ(fdctrl->dma, fdctrl->dma_chann); 1632 } 1633 fdctrl->msr |= FD_MSR_RQM | FD_MSR_DIO; 1634 fdctrl->msr &= ~FD_MSR_NONDMA; 1635 1636 fdctrl_to_result_phase(fdctrl, 7); 1637 fdctrl_raise_irq(fdctrl); 1638 } 1639 1640 /* Prepare a data transfer (either DMA or FIFO) */ 1641 static void fdctrl_start_transfer(FDCtrl *fdctrl, int direction) 1642 { 1643 FDrive *cur_drv; 1644 uint8_t kh, kt, ks; 1645 1646 SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); 1647 cur_drv = get_cur_drv(fdctrl); 1648 kt = fdctrl->fifo[2]; 1649 kh = fdctrl->fifo[3]; 1650 ks = fdctrl->fifo[4]; 1651 FLOPPY_DPRINTF("Start transfer at %d %d %02x %02x (%d)\n", 1652 GET_CUR_DRV(fdctrl), kh, kt, ks, 1653 fd_sector_calc(kh, kt, ks, cur_drv->last_sect, 1654 NUM_SIDES(cur_drv))); 1655 switch (fd_seek(cur_drv, kh, kt, ks, fdctrl->config & FD_CONFIG_EIS)) { 1656 case 2: 1657 /* sect too big */ 1658 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, 0x00, 0x00); 1659 fdctrl->fifo[3] = kt; 1660 fdctrl->fifo[4] = kh; 1661 fdctrl->fifo[5] = ks; 1662 return; 1663 case 3: 1664 /* track too big */ 1665 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, FD_SR1_EC, 0x00); 1666 fdctrl->fifo[3] = kt; 1667 fdctrl->fifo[4] = kh; 1668 fdctrl->fifo[5] = ks; 1669 return; 1670 case 4: 1671 /* No seek enabled */ 1672 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, 0x00, 0x00); 1673 fdctrl->fifo[3] = kt; 1674 fdctrl->fifo[4] = kh; 1675 fdctrl->fifo[5] = ks; 1676 return; 1677 case 1: 1678 fdctrl->status0 |= FD_SR0_SEEK; 1679 break; 1680 default: 1681 break; 1682 } 1683 1684 /* Check the data rate. If the programmed data rate does not match 1685 * the currently inserted medium, the operation has to fail. */ 1686 if (fdctrl->check_media_rate && 1687 (fdctrl->dsr & FD_DSR_DRATEMASK) != cur_drv->media_rate) { 1688 FLOPPY_DPRINTF("data rate mismatch (fdc=%d, media=%d)\n", 1689 fdctrl->dsr & FD_DSR_DRATEMASK, cur_drv->media_rate); 1690 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, FD_SR1_MA, 0x00); 1691 fdctrl->fifo[3] = kt; 1692 fdctrl->fifo[4] = kh; 1693 fdctrl->fifo[5] = ks; 1694 return; 1695 } 1696 1697 /* Set the FIFO state */ 1698 fdctrl->data_dir = direction; 1699 fdctrl->data_pos = 0; 1700 assert(fdctrl->msr & FD_MSR_CMDBUSY); 1701 if (fdctrl->fifo[0] & 0x80) 1702 fdctrl->data_state |= FD_STATE_MULTI; 1703 else 1704 fdctrl->data_state &= ~FD_STATE_MULTI; 1705 if (fdctrl->fifo[5] == 0) { 1706 fdctrl->data_len = fdctrl->fifo[8]; 1707 } else { 1708 int tmp; 1709 fdctrl->data_len = 128 << (fdctrl->fifo[5] > 7 ? 7 : fdctrl->fifo[5]); 1710 tmp = (fdctrl->fifo[6] - ks + 1); 1711 if (fdctrl->fifo[0] & 0x80) 1712 tmp += fdctrl->fifo[6]; 1713 fdctrl->data_len *= tmp; 1714 } 1715 fdctrl->eot = fdctrl->fifo[6]; 1716 if (fdctrl->dor & FD_DOR_DMAEN) { 1717 /* DMA transfer is enabled. */ 1718 IsaDmaClass *k = ISADMA_GET_CLASS(fdctrl->dma); 1719 1720 FLOPPY_DPRINTF("direction=%d (%d - %d)\n", 1721 direction, (128 << fdctrl->fifo[5]) * 1722 (cur_drv->last_sect - ks + 1), fdctrl->data_len); 1723 1724 /* No access is allowed until DMA transfer has completed */ 1725 fdctrl->msr &= ~FD_MSR_RQM; 1726 if (direction != FD_DIR_VERIFY) { 1727 /* 1728 * Now, we just have to wait for the DMA controller to 1729 * recall us... 1730 */ 1731 k->hold_DREQ(fdctrl->dma, fdctrl->dma_chann); 1732 k->schedule(fdctrl->dma); 1733 } else { 1734 /* Start transfer */ 1735 fdctrl_transfer_handler(fdctrl, fdctrl->dma_chann, 0, 1736 fdctrl->data_len); 1737 } 1738 return; 1739 } 1740 FLOPPY_DPRINTF("start non-DMA transfer\n"); 1741 fdctrl->msr |= FD_MSR_NONDMA | FD_MSR_RQM; 1742 if (direction != FD_DIR_WRITE) 1743 fdctrl->msr |= FD_MSR_DIO; 1744 /* IO based transfer: calculate len */ 1745 fdctrl_raise_irq(fdctrl); 1746 } 1747 1748 /* Prepare a transfer of deleted data */ 1749 static void fdctrl_start_transfer_del(FDCtrl *fdctrl, int direction) 1750 { 1751 qemu_log_mask(LOG_UNIMP, "fdctrl_start_transfer_del() unimplemented\n"); 1752 1753 /* We don't handle deleted data, 1754 * so we don't return *ANYTHING* 1755 */ 1756 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM | FD_SR0_SEEK, 0x00, 0x00); 1757 } 1758 1759 /* handlers for DMA transfers */ 1760 static int fdctrl_transfer_handler (void *opaque, int nchan, 1761 int dma_pos, int dma_len) 1762 { 1763 FDCtrl *fdctrl; 1764 FDrive *cur_drv; 1765 int len, start_pos, rel_pos; 1766 uint8_t status0 = 0x00, status1 = 0x00, status2 = 0x00; 1767 IsaDmaClass *k; 1768 1769 fdctrl = opaque; 1770 if (fdctrl->msr & FD_MSR_RQM) { 1771 FLOPPY_DPRINTF("Not in DMA transfer mode !\n"); 1772 return 0; 1773 } 1774 k = ISADMA_GET_CLASS(fdctrl->dma); 1775 cur_drv = get_cur_drv(fdctrl); 1776 if (fdctrl->data_dir == FD_DIR_SCANE || fdctrl->data_dir == FD_DIR_SCANL || 1777 fdctrl->data_dir == FD_DIR_SCANH) 1778 status2 = FD_SR2_SNS; 1779 if (dma_len > fdctrl->data_len) 1780 dma_len = fdctrl->data_len; 1781 if (cur_drv->blk == NULL) { 1782 if (fdctrl->data_dir == FD_DIR_WRITE) 1783 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM | FD_SR0_SEEK, 0x00, 0x00); 1784 else 1785 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, 0x00, 0x00); 1786 len = 0; 1787 goto transfer_error; 1788 } 1789 rel_pos = fdctrl->data_pos % FD_SECTOR_LEN; 1790 for (start_pos = fdctrl->data_pos; fdctrl->data_pos < dma_len;) { 1791 len = dma_len - fdctrl->data_pos; 1792 if (len + rel_pos > FD_SECTOR_LEN) 1793 len = FD_SECTOR_LEN - rel_pos; 1794 FLOPPY_DPRINTF("copy %d bytes (%d %d %d) %d pos %d %02x " 1795 "(%d-0x%08x 0x%08x)\n", len, dma_len, fdctrl->data_pos, 1796 fdctrl->data_len, GET_CUR_DRV(fdctrl), cur_drv->head, 1797 cur_drv->track, cur_drv->sect, fd_sector(cur_drv), 1798 fd_sector(cur_drv) * FD_SECTOR_LEN); 1799 if (fdctrl->data_dir != FD_DIR_WRITE || 1800 len < FD_SECTOR_LEN || rel_pos != 0) { 1801 /* READ & SCAN commands and realign to a sector for WRITE */ 1802 if (blk_pread(cur_drv->blk, fd_offset(cur_drv), 1803 fdctrl->fifo, BDRV_SECTOR_SIZE) < 0) { 1804 FLOPPY_DPRINTF("Floppy: error getting sector %d\n", 1805 fd_sector(cur_drv)); 1806 /* Sure, image size is too small... */ 1807 memset(fdctrl->fifo, 0, FD_SECTOR_LEN); 1808 } 1809 } 1810 switch (fdctrl->data_dir) { 1811 case FD_DIR_READ: 1812 /* READ commands */ 1813 k->write_memory(fdctrl->dma, nchan, fdctrl->fifo + rel_pos, 1814 fdctrl->data_pos, len); 1815 break; 1816 case FD_DIR_WRITE: 1817 /* WRITE commands */ 1818 if (cur_drv->ro) { 1819 /* Handle readonly medium early, no need to do DMA, touch the 1820 * LED or attempt any writes. A real floppy doesn't attempt 1821 * to write to readonly media either. */ 1822 fdctrl_stop_transfer(fdctrl, 1823 FD_SR0_ABNTERM | FD_SR0_SEEK, FD_SR1_NW, 1824 0x00); 1825 goto transfer_error; 1826 } 1827 1828 k->read_memory(fdctrl->dma, nchan, fdctrl->fifo + rel_pos, 1829 fdctrl->data_pos, len); 1830 if (blk_pwrite(cur_drv->blk, fd_offset(cur_drv), 1831 fdctrl->fifo, BDRV_SECTOR_SIZE, 0) < 0) { 1832 FLOPPY_DPRINTF("error writing sector %d\n", 1833 fd_sector(cur_drv)); 1834 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM | FD_SR0_SEEK, 0x00, 0x00); 1835 goto transfer_error; 1836 } 1837 break; 1838 case FD_DIR_VERIFY: 1839 /* VERIFY commands */ 1840 break; 1841 default: 1842 /* SCAN commands */ 1843 { 1844 uint8_t tmpbuf[FD_SECTOR_LEN]; 1845 int ret; 1846 k->read_memory(fdctrl->dma, nchan, tmpbuf, fdctrl->data_pos, 1847 len); 1848 ret = memcmp(tmpbuf, fdctrl->fifo + rel_pos, len); 1849 if (ret == 0) { 1850 status2 = FD_SR2_SEH; 1851 goto end_transfer; 1852 } 1853 if ((ret < 0 && fdctrl->data_dir == FD_DIR_SCANL) || 1854 (ret > 0 && fdctrl->data_dir == FD_DIR_SCANH)) { 1855 status2 = 0x00; 1856 goto end_transfer; 1857 } 1858 } 1859 break; 1860 } 1861 fdctrl->data_pos += len; 1862 rel_pos = fdctrl->data_pos % FD_SECTOR_LEN; 1863 if (rel_pos == 0) { 1864 /* Seek to next sector */ 1865 if (!fdctrl_seek_to_next_sect(fdctrl, cur_drv)) 1866 break; 1867 } 1868 } 1869 end_transfer: 1870 len = fdctrl->data_pos - start_pos; 1871 FLOPPY_DPRINTF("end transfer %d %d %d\n", 1872 fdctrl->data_pos, len, fdctrl->data_len); 1873 if (fdctrl->data_dir == FD_DIR_SCANE || 1874 fdctrl->data_dir == FD_DIR_SCANL || 1875 fdctrl->data_dir == FD_DIR_SCANH) 1876 status2 = FD_SR2_SEH; 1877 fdctrl->data_len -= len; 1878 fdctrl_stop_transfer(fdctrl, status0, status1, status2); 1879 transfer_error: 1880 1881 return len; 1882 } 1883 1884 /* Data register : 0x05 */ 1885 static uint32_t fdctrl_read_data(FDCtrl *fdctrl) 1886 { 1887 FDrive *cur_drv; 1888 uint32_t retval = 0; 1889 uint32_t pos; 1890 1891 cur_drv = get_cur_drv(fdctrl); 1892 fdctrl->dsr &= ~FD_DSR_PWRDOWN; 1893 if (!(fdctrl->msr & FD_MSR_RQM) || !(fdctrl->msr & FD_MSR_DIO)) { 1894 FLOPPY_DPRINTF("error: controller not ready for reading\n"); 1895 return 0; 1896 } 1897 1898 /* If data_len spans multiple sectors, the current position in the FIFO 1899 * wraps around while fdctrl->data_pos is the real position in the whole 1900 * request. */ 1901 pos = fdctrl->data_pos; 1902 pos %= FD_SECTOR_LEN; 1903 1904 switch (fdctrl->phase) { 1905 case FD_PHASE_EXECUTION: 1906 assert(fdctrl->msr & FD_MSR_NONDMA); 1907 if (pos == 0) { 1908 if (fdctrl->data_pos != 0) 1909 if (!fdctrl_seek_to_next_sect(fdctrl, cur_drv)) { 1910 FLOPPY_DPRINTF("error seeking to next sector %d\n", 1911 fd_sector(cur_drv)); 1912 return 0; 1913 } 1914 if (blk_pread(cur_drv->blk, fd_offset(cur_drv), fdctrl->fifo, 1915 BDRV_SECTOR_SIZE) 1916 < 0) { 1917 FLOPPY_DPRINTF("error getting sector %d\n", 1918 fd_sector(cur_drv)); 1919 /* Sure, image size is too small... */ 1920 memset(fdctrl->fifo, 0, FD_SECTOR_LEN); 1921 } 1922 } 1923 1924 if (++fdctrl->data_pos == fdctrl->data_len) { 1925 fdctrl->msr &= ~FD_MSR_RQM; 1926 fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00); 1927 } 1928 break; 1929 1930 case FD_PHASE_RESULT: 1931 assert(!(fdctrl->msr & FD_MSR_NONDMA)); 1932 if (++fdctrl->data_pos == fdctrl->data_len) { 1933 fdctrl->msr &= ~FD_MSR_RQM; 1934 fdctrl_to_command_phase(fdctrl); 1935 fdctrl_reset_irq(fdctrl); 1936 } 1937 break; 1938 1939 case FD_PHASE_COMMAND: 1940 default: 1941 abort(); 1942 } 1943 1944 retval = fdctrl->fifo[pos]; 1945 FLOPPY_DPRINTF("data register: 0x%02x\n", retval); 1946 1947 return retval; 1948 } 1949 1950 static void fdctrl_format_sector(FDCtrl *fdctrl) 1951 { 1952 FDrive *cur_drv; 1953 uint8_t kh, kt, ks; 1954 1955 SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); 1956 cur_drv = get_cur_drv(fdctrl); 1957 kt = fdctrl->fifo[6]; 1958 kh = fdctrl->fifo[7]; 1959 ks = fdctrl->fifo[8]; 1960 FLOPPY_DPRINTF("format sector at %d %d %02x %02x (%d)\n", 1961 GET_CUR_DRV(fdctrl), kh, kt, ks, 1962 fd_sector_calc(kh, kt, ks, cur_drv->last_sect, 1963 NUM_SIDES(cur_drv))); 1964 switch (fd_seek(cur_drv, kh, kt, ks, fdctrl->config & FD_CONFIG_EIS)) { 1965 case 2: 1966 /* sect too big */ 1967 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, 0x00, 0x00); 1968 fdctrl->fifo[3] = kt; 1969 fdctrl->fifo[4] = kh; 1970 fdctrl->fifo[5] = ks; 1971 return; 1972 case 3: 1973 /* track too big */ 1974 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, FD_SR1_EC, 0x00); 1975 fdctrl->fifo[3] = kt; 1976 fdctrl->fifo[4] = kh; 1977 fdctrl->fifo[5] = ks; 1978 return; 1979 case 4: 1980 /* No seek enabled */ 1981 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, 0x00, 0x00); 1982 fdctrl->fifo[3] = kt; 1983 fdctrl->fifo[4] = kh; 1984 fdctrl->fifo[5] = ks; 1985 return; 1986 case 1: 1987 fdctrl->status0 |= FD_SR0_SEEK; 1988 break; 1989 default: 1990 break; 1991 } 1992 memset(fdctrl->fifo, 0, FD_SECTOR_LEN); 1993 if (cur_drv->blk == NULL || 1994 blk_pwrite(cur_drv->blk, fd_offset(cur_drv), fdctrl->fifo, 1995 BDRV_SECTOR_SIZE, 0) < 0) { 1996 FLOPPY_DPRINTF("error formatting sector %d\n", fd_sector(cur_drv)); 1997 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM | FD_SR0_SEEK, 0x00, 0x00); 1998 } else { 1999 if (cur_drv->sect == cur_drv->last_sect) { 2000 fdctrl->data_state &= ~FD_STATE_FORMAT; 2001 /* Last sector done */ 2002 fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00); 2003 } else { 2004 /* More to do */ 2005 fdctrl->data_pos = 0; 2006 fdctrl->data_len = 4; 2007 } 2008 } 2009 } 2010 2011 static void fdctrl_handle_lock(FDCtrl *fdctrl, int direction) 2012 { 2013 fdctrl->lock = (fdctrl->fifo[0] & 0x80) ? 1 : 0; 2014 fdctrl->fifo[0] = fdctrl->lock << 4; 2015 fdctrl_to_result_phase(fdctrl, 1); 2016 } 2017 2018 static void fdctrl_handle_dumpreg(FDCtrl *fdctrl, int direction) 2019 { 2020 FDrive *cur_drv = get_cur_drv(fdctrl); 2021 2022 /* Drives position */ 2023 fdctrl->fifo[0] = drv0(fdctrl)->track; 2024 fdctrl->fifo[1] = drv1(fdctrl)->track; 2025 #if MAX_FD == 4 2026 fdctrl->fifo[2] = drv2(fdctrl)->track; 2027 fdctrl->fifo[3] = drv3(fdctrl)->track; 2028 #else 2029 fdctrl->fifo[2] = 0; 2030 fdctrl->fifo[3] = 0; 2031 #endif 2032 /* timers */ 2033 fdctrl->fifo[4] = fdctrl->timer0; 2034 fdctrl->fifo[5] = (fdctrl->timer1 << 1) | (fdctrl->dor & FD_DOR_DMAEN ? 1 : 0); 2035 fdctrl->fifo[6] = cur_drv->last_sect; 2036 fdctrl->fifo[7] = (fdctrl->lock << 7) | 2037 (cur_drv->perpendicular << 2); 2038 fdctrl->fifo[8] = fdctrl->config; 2039 fdctrl->fifo[9] = fdctrl->precomp_trk; 2040 fdctrl_to_result_phase(fdctrl, 10); 2041 } 2042 2043 static void fdctrl_handle_version(FDCtrl *fdctrl, int direction) 2044 { 2045 /* Controller's version */ 2046 fdctrl->fifo[0] = fdctrl->version; 2047 fdctrl_to_result_phase(fdctrl, 1); 2048 } 2049 2050 static void fdctrl_handle_partid(FDCtrl *fdctrl, int direction) 2051 { 2052 fdctrl->fifo[0] = 0x41; /* Stepping 1 */ 2053 fdctrl_to_result_phase(fdctrl, 1); 2054 } 2055 2056 static void fdctrl_handle_restore(FDCtrl *fdctrl, int direction) 2057 { 2058 FDrive *cur_drv = get_cur_drv(fdctrl); 2059 2060 /* Drives position */ 2061 drv0(fdctrl)->track = fdctrl->fifo[3]; 2062 drv1(fdctrl)->track = fdctrl->fifo[4]; 2063 #if MAX_FD == 4 2064 drv2(fdctrl)->track = fdctrl->fifo[5]; 2065 drv3(fdctrl)->track = fdctrl->fifo[6]; 2066 #endif 2067 /* timers */ 2068 fdctrl->timer0 = fdctrl->fifo[7]; 2069 fdctrl->timer1 = fdctrl->fifo[8]; 2070 cur_drv->last_sect = fdctrl->fifo[9]; 2071 fdctrl->lock = fdctrl->fifo[10] >> 7; 2072 cur_drv->perpendicular = (fdctrl->fifo[10] >> 2) & 0xF; 2073 fdctrl->config = fdctrl->fifo[11]; 2074 fdctrl->precomp_trk = fdctrl->fifo[12]; 2075 fdctrl->pwrd = fdctrl->fifo[13]; 2076 fdctrl_to_command_phase(fdctrl); 2077 } 2078 2079 static void fdctrl_handle_save(FDCtrl *fdctrl, int direction) 2080 { 2081 FDrive *cur_drv = get_cur_drv(fdctrl); 2082 2083 fdctrl->fifo[0] = 0; 2084 fdctrl->fifo[1] = 0; 2085 /* Drives position */ 2086 fdctrl->fifo[2] = drv0(fdctrl)->track; 2087 fdctrl->fifo[3] = drv1(fdctrl)->track; 2088 #if MAX_FD == 4 2089 fdctrl->fifo[4] = drv2(fdctrl)->track; 2090 fdctrl->fifo[5] = drv3(fdctrl)->track; 2091 #else 2092 fdctrl->fifo[4] = 0; 2093 fdctrl->fifo[5] = 0; 2094 #endif 2095 /* timers */ 2096 fdctrl->fifo[6] = fdctrl->timer0; 2097 fdctrl->fifo[7] = fdctrl->timer1; 2098 fdctrl->fifo[8] = cur_drv->last_sect; 2099 fdctrl->fifo[9] = (fdctrl->lock << 7) | 2100 (cur_drv->perpendicular << 2); 2101 fdctrl->fifo[10] = fdctrl->config; 2102 fdctrl->fifo[11] = fdctrl->precomp_trk; 2103 fdctrl->fifo[12] = fdctrl->pwrd; 2104 fdctrl->fifo[13] = 0; 2105 fdctrl->fifo[14] = 0; 2106 fdctrl_to_result_phase(fdctrl, 15); 2107 } 2108 2109 static void fdctrl_handle_readid(FDCtrl *fdctrl, int direction) 2110 { 2111 FDrive *cur_drv = get_cur_drv(fdctrl); 2112 2113 cur_drv->head = (fdctrl->fifo[1] >> 2) & 1; 2114 timer_mod(fdctrl->result_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 2115 (NANOSECONDS_PER_SECOND / 50)); 2116 } 2117 2118 static void fdctrl_handle_format_track(FDCtrl *fdctrl, int direction) 2119 { 2120 FDrive *cur_drv; 2121 2122 SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); 2123 cur_drv = get_cur_drv(fdctrl); 2124 fdctrl->data_state |= FD_STATE_FORMAT; 2125 if (fdctrl->fifo[0] & 0x80) 2126 fdctrl->data_state |= FD_STATE_MULTI; 2127 else 2128 fdctrl->data_state &= ~FD_STATE_MULTI; 2129 cur_drv->bps = 2130 fdctrl->fifo[2] > 7 ? 16384 : 128 << fdctrl->fifo[2]; 2131 #if 0 2132 cur_drv->last_sect = 2133 cur_drv->flags & FDISK_DBL_SIDES ? fdctrl->fifo[3] : 2134 fdctrl->fifo[3] / 2; 2135 #else 2136 cur_drv->last_sect = fdctrl->fifo[3]; 2137 #endif 2138 /* TODO: implement format using DMA expected by the Bochs BIOS 2139 * and Linux fdformat (read 3 bytes per sector via DMA and fill 2140 * the sector with the specified fill byte 2141 */ 2142 fdctrl->data_state &= ~FD_STATE_FORMAT; 2143 fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00); 2144 } 2145 2146 static void fdctrl_handle_specify(FDCtrl *fdctrl, int direction) 2147 { 2148 fdctrl->timer0 = (fdctrl->fifo[1] >> 4) & 0xF; 2149 fdctrl->timer1 = fdctrl->fifo[2] >> 1; 2150 if (fdctrl->fifo[2] & 1) 2151 fdctrl->dor &= ~FD_DOR_DMAEN; 2152 else 2153 fdctrl->dor |= FD_DOR_DMAEN; 2154 /* No result back */ 2155 fdctrl_to_command_phase(fdctrl); 2156 } 2157 2158 static void fdctrl_handle_sense_drive_status(FDCtrl *fdctrl, int direction) 2159 { 2160 FDrive *cur_drv; 2161 2162 SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); 2163 cur_drv = get_cur_drv(fdctrl); 2164 cur_drv->head = (fdctrl->fifo[1] >> 2) & 1; 2165 /* 1 Byte status back */ 2166 fdctrl->fifo[0] = (cur_drv->ro << 6) | 2167 (cur_drv->track == 0 ? 0x10 : 0x00) | 2168 (cur_drv->head << 2) | 2169 GET_CUR_DRV(fdctrl) | 2170 0x28; 2171 fdctrl_to_result_phase(fdctrl, 1); 2172 } 2173 2174 static void fdctrl_handle_recalibrate(FDCtrl *fdctrl, int direction) 2175 { 2176 FDrive *cur_drv; 2177 2178 SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); 2179 cur_drv = get_cur_drv(fdctrl); 2180 fd_recalibrate(cur_drv); 2181 fdctrl_to_command_phase(fdctrl); 2182 /* Raise Interrupt */ 2183 fdctrl->status0 |= FD_SR0_SEEK; 2184 fdctrl_raise_irq(fdctrl); 2185 } 2186 2187 static void fdctrl_handle_sense_interrupt_status(FDCtrl *fdctrl, int direction) 2188 { 2189 FDrive *cur_drv = get_cur_drv(fdctrl); 2190 2191 if (fdctrl->reset_sensei > 0) { 2192 fdctrl->fifo[0] = 2193 FD_SR0_RDYCHG + FD_RESET_SENSEI_COUNT - fdctrl->reset_sensei; 2194 fdctrl->reset_sensei--; 2195 } else if (!(fdctrl->sra & FD_SRA_INTPEND)) { 2196 fdctrl->fifo[0] = FD_SR0_INVCMD; 2197 fdctrl_to_result_phase(fdctrl, 1); 2198 return; 2199 } else { 2200 fdctrl->fifo[0] = 2201 (fdctrl->status0 & ~(FD_SR0_HEAD | FD_SR0_DS1 | FD_SR0_DS0)) 2202 | GET_CUR_DRV(fdctrl); 2203 } 2204 2205 fdctrl->fifo[1] = cur_drv->track; 2206 fdctrl_to_result_phase(fdctrl, 2); 2207 fdctrl_reset_irq(fdctrl); 2208 fdctrl->status0 = FD_SR0_RDYCHG; 2209 } 2210 2211 static void fdctrl_handle_seek(FDCtrl *fdctrl, int direction) 2212 { 2213 FDrive *cur_drv; 2214 2215 SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); 2216 cur_drv = get_cur_drv(fdctrl); 2217 fdctrl_to_command_phase(fdctrl); 2218 /* The seek command just sends step pulses to the drive and doesn't care if 2219 * there is a medium inserted of if it's banging the head against the drive. 2220 */ 2221 fd_seek(cur_drv, cur_drv->head, fdctrl->fifo[2], cur_drv->sect, 1); 2222 /* Raise Interrupt */ 2223 fdctrl->status0 |= FD_SR0_SEEK; 2224 fdctrl_raise_irq(fdctrl); 2225 } 2226 2227 static void fdctrl_handle_perpendicular_mode(FDCtrl *fdctrl, int direction) 2228 { 2229 FDrive *cur_drv = get_cur_drv(fdctrl); 2230 2231 if (fdctrl->fifo[1] & 0x80) 2232 cur_drv->perpendicular = fdctrl->fifo[1] & 0x7; 2233 /* No result back */ 2234 fdctrl_to_command_phase(fdctrl); 2235 } 2236 2237 static void fdctrl_handle_configure(FDCtrl *fdctrl, int direction) 2238 { 2239 fdctrl->config = fdctrl->fifo[2]; 2240 fdctrl->precomp_trk = fdctrl->fifo[3]; 2241 /* No result back */ 2242 fdctrl_to_command_phase(fdctrl); 2243 } 2244 2245 static void fdctrl_handle_powerdown_mode(FDCtrl *fdctrl, int direction) 2246 { 2247 fdctrl->pwrd = fdctrl->fifo[1]; 2248 fdctrl->fifo[0] = fdctrl->fifo[1]; 2249 fdctrl_to_result_phase(fdctrl, 1); 2250 } 2251 2252 static void fdctrl_handle_option(FDCtrl *fdctrl, int direction) 2253 { 2254 /* No result back */ 2255 fdctrl_to_command_phase(fdctrl); 2256 } 2257 2258 static void fdctrl_handle_drive_specification_command(FDCtrl *fdctrl, int direction) 2259 { 2260 FDrive *cur_drv = get_cur_drv(fdctrl); 2261 uint32_t pos; 2262 2263 pos = fdctrl->data_pos - 1; 2264 pos %= FD_SECTOR_LEN; 2265 if (fdctrl->fifo[pos] & 0x80) { 2266 /* Command parameters done */ 2267 if (fdctrl->fifo[pos] & 0x40) { 2268 fdctrl->fifo[0] = fdctrl->fifo[1]; 2269 fdctrl->fifo[2] = 0; 2270 fdctrl->fifo[3] = 0; 2271 fdctrl_to_result_phase(fdctrl, 4); 2272 } else { 2273 fdctrl_to_command_phase(fdctrl); 2274 } 2275 } else if (fdctrl->data_len > 7) { 2276 /* ERROR */ 2277 fdctrl->fifo[0] = 0x80 | 2278 (cur_drv->head << 2) | GET_CUR_DRV(fdctrl); 2279 fdctrl_to_result_phase(fdctrl, 1); 2280 } 2281 } 2282 2283 static void fdctrl_handle_relative_seek_in(FDCtrl *fdctrl, int direction) 2284 { 2285 FDrive *cur_drv; 2286 2287 SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); 2288 cur_drv = get_cur_drv(fdctrl); 2289 if (fdctrl->fifo[2] + cur_drv->track >= cur_drv->max_track) { 2290 fd_seek(cur_drv, cur_drv->head, cur_drv->max_track - 1, 2291 cur_drv->sect, 1); 2292 } else { 2293 fd_seek(cur_drv, cur_drv->head, 2294 cur_drv->track + fdctrl->fifo[2], cur_drv->sect, 1); 2295 } 2296 fdctrl_to_command_phase(fdctrl); 2297 /* Raise Interrupt */ 2298 fdctrl->status0 |= FD_SR0_SEEK; 2299 fdctrl_raise_irq(fdctrl); 2300 } 2301 2302 static void fdctrl_handle_relative_seek_out(FDCtrl *fdctrl, int direction) 2303 { 2304 FDrive *cur_drv; 2305 2306 SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); 2307 cur_drv = get_cur_drv(fdctrl); 2308 if (fdctrl->fifo[2] > cur_drv->track) { 2309 fd_seek(cur_drv, cur_drv->head, 0, cur_drv->sect, 1); 2310 } else { 2311 fd_seek(cur_drv, cur_drv->head, 2312 cur_drv->track - fdctrl->fifo[2], cur_drv->sect, 1); 2313 } 2314 fdctrl_to_command_phase(fdctrl); 2315 /* Raise Interrupt */ 2316 fdctrl->status0 |= FD_SR0_SEEK; 2317 fdctrl_raise_irq(fdctrl); 2318 } 2319 2320 /* 2321 * Handlers for the execution phase of each command 2322 */ 2323 typedef struct FDCtrlCommand { 2324 uint8_t value; 2325 uint8_t mask; 2326 const char* name; 2327 int parameters; 2328 void (*handler)(FDCtrl *fdctrl, int direction); 2329 int direction; 2330 } FDCtrlCommand; 2331 2332 static const FDCtrlCommand handlers[] = { 2333 { FD_CMD_READ, 0x1f, "READ", 8, fdctrl_start_transfer, FD_DIR_READ }, 2334 { FD_CMD_WRITE, 0x3f, "WRITE", 8, fdctrl_start_transfer, FD_DIR_WRITE }, 2335 { FD_CMD_SEEK, 0xff, "SEEK", 2, fdctrl_handle_seek }, 2336 { FD_CMD_SENSE_INTERRUPT_STATUS, 0xff, "SENSE INTERRUPT STATUS", 0, fdctrl_handle_sense_interrupt_status }, 2337 { FD_CMD_RECALIBRATE, 0xff, "RECALIBRATE", 1, fdctrl_handle_recalibrate }, 2338 { FD_CMD_FORMAT_TRACK, 0xbf, "FORMAT TRACK", 5, fdctrl_handle_format_track }, 2339 { FD_CMD_READ_TRACK, 0xbf, "READ TRACK", 8, fdctrl_start_transfer, FD_DIR_READ }, 2340 { FD_CMD_RESTORE, 0xff, "RESTORE", 17, fdctrl_handle_restore }, /* part of READ DELETED DATA */ 2341 { FD_CMD_SAVE, 0xff, "SAVE", 0, fdctrl_handle_save }, /* part of READ DELETED DATA */ 2342 { FD_CMD_READ_DELETED, 0x1f, "READ DELETED DATA", 8, fdctrl_start_transfer_del, FD_DIR_READ }, 2343 { FD_CMD_SCAN_EQUAL, 0x1f, "SCAN EQUAL", 8, fdctrl_start_transfer, FD_DIR_SCANE }, 2344 { FD_CMD_VERIFY, 0x1f, "VERIFY", 8, fdctrl_start_transfer, FD_DIR_VERIFY }, 2345 { FD_CMD_SCAN_LOW_OR_EQUAL, 0x1f, "SCAN LOW OR EQUAL", 8, fdctrl_start_transfer, FD_DIR_SCANL }, 2346 { FD_CMD_SCAN_HIGH_OR_EQUAL, 0x1f, "SCAN HIGH OR EQUAL", 8, fdctrl_start_transfer, FD_DIR_SCANH }, 2347 { FD_CMD_WRITE_DELETED, 0x3f, "WRITE DELETED DATA", 8, fdctrl_start_transfer_del, FD_DIR_WRITE }, 2348 { FD_CMD_READ_ID, 0xbf, "READ ID", 1, fdctrl_handle_readid }, 2349 { FD_CMD_SPECIFY, 0xff, "SPECIFY", 2, fdctrl_handle_specify }, 2350 { FD_CMD_SENSE_DRIVE_STATUS, 0xff, "SENSE DRIVE STATUS", 1, fdctrl_handle_sense_drive_status }, 2351 { FD_CMD_PERPENDICULAR_MODE, 0xff, "PERPENDICULAR MODE", 1, fdctrl_handle_perpendicular_mode }, 2352 { FD_CMD_CONFIGURE, 0xff, "CONFIGURE", 3, fdctrl_handle_configure }, 2353 { FD_CMD_POWERDOWN_MODE, 0xff, "POWERDOWN MODE", 2, fdctrl_handle_powerdown_mode }, 2354 { FD_CMD_OPTION, 0xff, "OPTION", 1, fdctrl_handle_option }, 2355 { FD_CMD_DRIVE_SPECIFICATION_COMMAND, 0xff, "DRIVE SPECIFICATION COMMAND", 5, fdctrl_handle_drive_specification_command }, 2356 { FD_CMD_RELATIVE_SEEK_OUT, 0xff, "RELATIVE SEEK OUT", 2, fdctrl_handle_relative_seek_out }, 2357 { FD_CMD_FORMAT_AND_WRITE, 0xff, "FORMAT AND WRITE", 10, fdctrl_unimplemented }, 2358 { FD_CMD_RELATIVE_SEEK_IN, 0xff, "RELATIVE SEEK IN", 2, fdctrl_handle_relative_seek_in }, 2359 { FD_CMD_LOCK, 0x7f, "LOCK", 0, fdctrl_handle_lock }, 2360 { FD_CMD_DUMPREG, 0xff, "DUMPREG", 0, fdctrl_handle_dumpreg }, 2361 { FD_CMD_VERSION, 0xff, "VERSION", 0, fdctrl_handle_version }, 2362 { FD_CMD_PART_ID, 0xff, "PART ID", 0, fdctrl_handle_partid }, 2363 { FD_CMD_WRITE, 0x1f, "WRITE (BeOS)", 8, fdctrl_start_transfer, FD_DIR_WRITE }, /* not in specification ; BeOS 4.5 bug */ 2364 { 0, 0, "unknown", 0, fdctrl_unimplemented }, /* default handler */ 2365 }; 2366 /* Associate command to an index in the 'handlers' array */ 2367 static uint8_t command_to_handler[256]; 2368 2369 static const FDCtrlCommand *get_command(uint8_t cmd) 2370 { 2371 int idx; 2372 2373 idx = command_to_handler[cmd]; 2374 FLOPPY_DPRINTF("%s command\n", handlers[idx].name); 2375 return &handlers[idx]; 2376 } 2377 2378 static void fdctrl_write_data(FDCtrl *fdctrl, uint32_t value) 2379 { 2380 FDrive *cur_drv; 2381 const FDCtrlCommand *cmd; 2382 uint32_t pos; 2383 2384 /* Reset mode */ 2385 if (!(fdctrl->dor & FD_DOR_nRESET)) { 2386 FLOPPY_DPRINTF("Floppy controller in RESET state !\n"); 2387 return; 2388 } 2389 if (!(fdctrl->msr & FD_MSR_RQM) || (fdctrl->msr & FD_MSR_DIO)) { 2390 FLOPPY_DPRINTF("error: controller not ready for writing\n"); 2391 return; 2392 } 2393 fdctrl->dsr &= ~FD_DSR_PWRDOWN; 2394 2395 FLOPPY_DPRINTF("%s: %02x\n", __func__, value); 2396 2397 /* If data_len spans multiple sectors, the current position in the FIFO 2398 * wraps around while fdctrl->data_pos is the real position in the whole 2399 * request. */ 2400 pos = fdctrl->data_pos++; 2401 pos %= FD_SECTOR_LEN; 2402 fdctrl->fifo[pos] = value; 2403 2404 if (fdctrl->data_pos == fdctrl->data_len) { 2405 fdctrl->msr &= ~FD_MSR_RQM; 2406 } 2407 2408 switch (fdctrl->phase) { 2409 case FD_PHASE_EXECUTION: 2410 /* For DMA requests, RQM should be cleared during execution phase, so 2411 * we would have errored out above. */ 2412 assert(fdctrl->msr & FD_MSR_NONDMA); 2413 2414 /* FIFO data write */ 2415 if (pos == FD_SECTOR_LEN - 1 || 2416 fdctrl->data_pos == fdctrl->data_len) { 2417 cur_drv = get_cur_drv(fdctrl); 2418 if (blk_pwrite(cur_drv->blk, fd_offset(cur_drv), fdctrl->fifo, 2419 BDRV_SECTOR_SIZE, 0) < 0) { 2420 FLOPPY_DPRINTF("error writing sector %d\n", 2421 fd_sector(cur_drv)); 2422 break; 2423 } 2424 if (!fdctrl_seek_to_next_sect(fdctrl, cur_drv)) { 2425 FLOPPY_DPRINTF("error seeking to next sector %d\n", 2426 fd_sector(cur_drv)); 2427 break; 2428 } 2429 } 2430 2431 /* Switch to result phase when done with the transfer */ 2432 if (fdctrl->data_pos == fdctrl->data_len) { 2433 fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00); 2434 } 2435 break; 2436 2437 case FD_PHASE_COMMAND: 2438 assert(!(fdctrl->msr & FD_MSR_NONDMA)); 2439 assert(fdctrl->data_pos < FD_SECTOR_LEN); 2440 2441 if (pos == 0) { 2442 /* The first byte specifies the command. Now we start reading 2443 * as many parameters as this command requires. */ 2444 cmd = get_command(value); 2445 fdctrl->data_len = cmd->parameters + 1; 2446 if (cmd->parameters) { 2447 fdctrl->msr |= FD_MSR_RQM; 2448 } 2449 fdctrl->msr |= FD_MSR_CMDBUSY; 2450 } 2451 2452 if (fdctrl->data_pos == fdctrl->data_len) { 2453 /* We have all parameters now, execute the command */ 2454 fdctrl->phase = FD_PHASE_EXECUTION; 2455 2456 if (fdctrl->data_state & FD_STATE_FORMAT) { 2457 fdctrl_format_sector(fdctrl); 2458 break; 2459 } 2460 2461 cmd = get_command(fdctrl->fifo[0]); 2462 FLOPPY_DPRINTF("Calling handler for '%s'\n", cmd->name); 2463 cmd->handler(fdctrl, cmd->direction); 2464 } 2465 break; 2466 2467 case FD_PHASE_RESULT: 2468 default: 2469 abort(); 2470 } 2471 } 2472 2473 static void fdctrl_result_timer(void *opaque) 2474 { 2475 FDCtrl *fdctrl = opaque; 2476 FDrive *cur_drv = get_cur_drv(fdctrl); 2477 2478 /* Pretend we are spinning. 2479 * This is needed for Coherent, which uses READ ID to check for 2480 * sector interleaving. 2481 */ 2482 if (cur_drv->last_sect != 0) { 2483 cur_drv->sect = (cur_drv->sect % cur_drv->last_sect) + 1; 2484 } 2485 /* READ_ID can't automatically succeed! */ 2486 if (fdctrl->check_media_rate && 2487 (fdctrl->dsr & FD_DSR_DRATEMASK) != cur_drv->media_rate) { 2488 FLOPPY_DPRINTF("read id rate mismatch (fdc=%d, media=%d)\n", 2489 fdctrl->dsr & FD_DSR_DRATEMASK, cur_drv->media_rate); 2490 fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, FD_SR1_MA, 0x00); 2491 } else { 2492 fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00); 2493 } 2494 } 2495 2496 /* Init functions */ 2497 static void fdctrl_connect_drives(FDCtrl *fdctrl, DeviceState *fdc_dev, 2498 Error **errp) 2499 { 2500 unsigned int i; 2501 FDrive *drive; 2502 DeviceState *dev; 2503 BlockBackend *blk; 2504 Error *local_err = NULL; 2505 2506 for (i = 0; i < MAX_FD; i++) { 2507 drive = &fdctrl->drives[i]; 2508 drive->fdctrl = fdctrl; 2509 2510 /* If the drive is not present, we skip creating the qdev device, but 2511 * still have to initialise the controller. */ 2512 blk = fdctrl->qdev_for_drives[i].blk; 2513 if (!blk) { 2514 fd_init(drive); 2515 fd_revalidate(drive); 2516 continue; 2517 } 2518 2519 dev = qdev_create(&fdctrl->bus.bus, "floppy"); 2520 qdev_prop_set_uint32(dev, "unit", i); 2521 qdev_prop_set_enum(dev, "drive-type", fdctrl->qdev_for_drives[i].type); 2522 2523 blk_ref(blk); 2524 blk_detach_dev(blk, fdc_dev); 2525 fdctrl->qdev_for_drives[i].blk = NULL; 2526 qdev_prop_set_drive(dev, "drive", blk, &local_err); 2527 blk_unref(blk); 2528 2529 if (local_err) { 2530 error_propagate(errp, local_err); 2531 return; 2532 } 2533 2534 object_property_set_bool(OBJECT(dev), true, "realized", &local_err); 2535 if (local_err) { 2536 error_propagate(errp, local_err); 2537 return; 2538 } 2539 } 2540 } 2541 2542 ISADevice *fdctrl_init_isa(ISABus *bus, DriveInfo **fds) 2543 { 2544 DeviceState *dev; 2545 ISADevice *isadev; 2546 2547 isadev = isa_try_create(bus, TYPE_ISA_FDC); 2548 if (!isadev) { 2549 return NULL; 2550 } 2551 dev = DEVICE(isadev); 2552 2553 if (fds[0]) { 2554 qdev_prop_set_drive(dev, "driveA", blk_by_legacy_dinfo(fds[0]), 2555 &error_fatal); 2556 } 2557 if (fds[1]) { 2558 qdev_prop_set_drive(dev, "driveB", blk_by_legacy_dinfo(fds[1]), 2559 &error_fatal); 2560 } 2561 qdev_init_nofail(dev); 2562 2563 return isadev; 2564 } 2565 2566 void fdctrl_init_sysbus(qemu_irq irq, int dma_chann, 2567 hwaddr mmio_base, DriveInfo **fds) 2568 { 2569 FDCtrl *fdctrl; 2570 DeviceState *dev; 2571 SysBusDevice *sbd; 2572 FDCtrlSysBus *sys; 2573 2574 dev = qdev_create(NULL, "sysbus-fdc"); 2575 sys = SYSBUS_FDC(dev); 2576 fdctrl = &sys->state; 2577 fdctrl->dma_chann = dma_chann; /* FIXME */ 2578 if (fds[0]) { 2579 qdev_prop_set_drive(dev, "driveA", blk_by_legacy_dinfo(fds[0]), 2580 &error_fatal); 2581 } 2582 if (fds[1]) { 2583 qdev_prop_set_drive(dev, "driveB", blk_by_legacy_dinfo(fds[1]), 2584 &error_fatal); 2585 } 2586 qdev_init_nofail(dev); 2587 sbd = SYS_BUS_DEVICE(dev); 2588 sysbus_connect_irq(sbd, 0, irq); 2589 sysbus_mmio_map(sbd, 0, mmio_base); 2590 } 2591 2592 void sun4m_fdctrl_init(qemu_irq irq, hwaddr io_base, 2593 DriveInfo **fds, qemu_irq *fdc_tc) 2594 { 2595 DeviceState *dev; 2596 FDCtrlSysBus *sys; 2597 2598 dev = qdev_create(NULL, "SUNW,fdtwo"); 2599 if (fds[0]) { 2600 qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(fds[0]), 2601 &error_fatal); 2602 } 2603 qdev_init_nofail(dev); 2604 sys = SYSBUS_FDC(dev); 2605 sysbus_connect_irq(SYS_BUS_DEVICE(sys), 0, irq); 2606 sysbus_mmio_map(SYS_BUS_DEVICE(sys), 0, io_base); 2607 *fdc_tc = qdev_get_gpio_in(dev, 0); 2608 } 2609 2610 static void fdctrl_realize_common(DeviceState *dev, FDCtrl *fdctrl, 2611 Error **errp) 2612 { 2613 int i, j; 2614 static int command_tables_inited = 0; 2615 2616 if (fdctrl->fallback == FLOPPY_DRIVE_TYPE_AUTO) { 2617 error_setg(errp, "Cannot choose a fallback FDrive type of 'auto'"); 2618 return; 2619 } 2620 2621 /* Fill 'command_to_handler' lookup table */ 2622 if (!command_tables_inited) { 2623 command_tables_inited = 1; 2624 for (i = ARRAY_SIZE(handlers) - 1; i >= 0; i--) { 2625 for (j = 0; j < sizeof(command_to_handler); j++) { 2626 if ((j & handlers[i].mask) == handlers[i].value) { 2627 command_to_handler[j] = i; 2628 } 2629 } 2630 } 2631 } 2632 2633 FLOPPY_DPRINTF("init controller\n"); 2634 fdctrl->fifo = qemu_memalign(512, FD_SECTOR_LEN); 2635 memset(fdctrl->fifo, 0, FD_SECTOR_LEN); 2636 fdctrl->fifo_size = 512; 2637 fdctrl->result_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, 2638 fdctrl_result_timer, fdctrl); 2639 2640 fdctrl->version = 0x90; /* Intel 82078 controller */ 2641 fdctrl->config = FD_CONFIG_EIS | FD_CONFIG_EFIFO; /* Implicit seek, polling & FIFO enabled */ 2642 fdctrl->num_floppies = MAX_FD; 2643 2644 if (fdctrl->dma_chann != -1) { 2645 IsaDmaClass *k; 2646 assert(fdctrl->dma); 2647 k = ISADMA_GET_CLASS(fdctrl->dma); 2648 k->register_channel(fdctrl->dma, fdctrl->dma_chann, 2649 &fdctrl_transfer_handler, fdctrl); 2650 } 2651 2652 floppy_bus_create(fdctrl, &fdctrl->bus, dev); 2653 fdctrl_connect_drives(fdctrl, dev, errp); 2654 } 2655 2656 static const MemoryRegionPortio fdc_portio_list[] = { 2657 { 1, 5, 1, .read = fdctrl_read, .write = fdctrl_write }, 2658 { 7, 1, 1, .read = fdctrl_read, .write = fdctrl_write }, 2659 PORTIO_END_OF_LIST(), 2660 }; 2661 2662 static void isabus_fdc_realize(DeviceState *dev, Error **errp) 2663 { 2664 ISADevice *isadev = ISA_DEVICE(dev); 2665 FDCtrlISABus *isa = ISA_FDC(dev); 2666 FDCtrl *fdctrl = &isa->state; 2667 Error *err = NULL; 2668 2669 isa_register_portio_list(isadev, &fdctrl->portio_list, 2670 isa->iobase, fdc_portio_list, fdctrl, 2671 "fdc"); 2672 2673 isa_init_irq(isadev, &fdctrl->irq, isa->irq); 2674 fdctrl->dma_chann = isa->dma; 2675 if (fdctrl->dma_chann != -1) { 2676 fdctrl->dma = isa_get_dma(isa_bus_from_device(isadev), isa->dma); 2677 if (!fdctrl->dma) { 2678 error_setg(errp, "ISA controller does not support DMA"); 2679 return; 2680 } 2681 } 2682 2683 qdev_set_legacy_instance_id(dev, isa->iobase, 2); 2684 fdctrl_realize_common(dev, fdctrl, &err); 2685 if (err != NULL) { 2686 error_propagate(errp, err); 2687 return; 2688 } 2689 } 2690 2691 static void sysbus_fdc_initfn(Object *obj) 2692 { 2693 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 2694 FDCtrlSysBus *sys = SYSBUS_FDC(obj); 2695 FDCtrl *fdctrl = &sys->state; 2696 2697 fdctrl->dma_chann = -1; 2698 2699 memory_region_init_io(&fdctrl->iomem, obj, &fdctrl_mem_ops, fdctrl, 2700 "fdc", 0x08); 2701 sysbus_init_mmio(sbd, &fdctrl->iomem); 2702 } 2703 2704 static void sun4m_fdc_initfn(Object *obj) 2705 { 2706 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 2707 FDCtrlSysBus *sys = SYSBUS_FDC(obj); 2708 FDCtrl *fdctrl = &sys->state; 2709 2710 fdctrl->dma_chann = -1; 2711 2712 memory_region_init_io(&fdctrl->iomem, obj, &fdctrl_mem_strict_ops, 2713 fdctrl, "fdctrl", 0x08); 2714 sysbus_init_mmio(sbd, &fdctrl->iomem); 2715 } 2716 2717 static void sysbus_fdc_common_initfn(Object *obj) 2718 { 2719 DeviceState *dev = DEVICE(obj); 2720 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 2721 FDCtrlSysBus *sys = SYSBUS_FDC(obj); 2722 FDCtrl *fdctrl = &sys->state; 2723 2724 qdev_set_legacy_instance_id(dev, 0 /* io */, 2); /* FIXME */ 2725 2726 sysbus_init_irq(sbd, &fdctrl->irq); 2727 qdev_init_gpio_in(dev, fdctrl_handle_tc, 1); 2728 } 2729 2730 static void sysbus_fdc_common_realize(DeviceState *dev, Error **errp) 2731 { 2732 FDCtrlSysBus *sys = SYSBUS_FDC(dev); 2733 FDCtrl *fdctrl = &sys->state; 2734 2735 fdctrl_realize_common(dev, fdctrl, errp); 2736 } 2737 2738 FloppyDriveType isa_fdc_get_drive_type(ISADevice *fdc, int i) 2739 { 2740 FDCtrlISABus *isa = ISA_FDC(fdc); 2741 2742 return isa->state.drives[i].drive; 2743 } 2744 2745 void isa_fdc_get_drive_max_chs(FloppyDriveType type, 2746 uint8_t *maxc, uint8_t *maxh, uint8_t *maxs) 2747 { 2748 const FDFormat *fdf; 2749 2750 *maxc = *maxh = *maxs = 0; 2751 for (fdf = fd_formats; fdf->drive != FLOPPY_DRIVE_TYPE_NONE; fdf++) { 2752 if (fdf->drive != type) { 2753 continue; 2754 } 2755 if (*maxc < fdf->max_track) { 2756 *maxc = fdf->max_track; 2757 } 2758 if (*maxh < fdf->max_head) { 2759 *maxh = fdf->max_head; 2760 } 2761 if (*maxs < fdf->last_sect) { 2762 *maxs = fdf->last_sect; 2763 } 2764 } 2765 (*maxc)--; 2766 } 2767 2768 static const VMStateDescription vmstate_isa_fdc ={ 2769 .name = "fdc", 2770 .version_id = 2, 2771 .minimum_version_id = 2, 2772 .fields = (VMStateField[]) { 2773 VMSTATE_STRUCT(state, FDCtrlISABus, 0, vmstate_fdc, FDCtrl), 2774 VMSTATE_END_OF_LIST() 2775 } 2776 }; 2777 2778 static Property isa_fdc_properties[] = { 2779 DEFINE_PROP_UINT32("iobase", FDCtrlISABus, iobase, 0x3f0), 2780 DEFINE_PROP_UINT32("irq", FDCtrlISABus, irq, 6), 2781 DEFINE_PROP_UINT32("dma", FDCtrlISABus, dma, 2), 2782 DEFINE_PROP_DRIVE("driveA", FDCtrlISABus, state.qdev_for_drives[0].blk), 2783 DEFINE_PROP_DRIVE("driveB", FDCtrlISABus, state.qdev_for_drives[1].blk), 2784 DEFINE_PROP_BIT("check_media_rate", FDCtrlISABus, state.check_media_rate, 2785 0, true), 2786 DEFINE_PROP_SIGNED("fdtypeA", FDCtrlISABus, state.qdev_for_drives[0].type, 2787 FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type, 2788 FloppyDriveType), 2789 DEFINE_PROP_SIGNED("fdtypeB", FDCtrlISABus, state.qdev_for_drives[1].type, 2790 FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type, 2791 FloppyDriveType), 2792 DEFINE_PROP_SIGNED("fallback", FDCtrlISABus, state.fallback, 2793 FLOPPY_DRIVE_TYPE_288, qdev_prop_fdc_drive_type, 2794 FloppyDriveType), 2795 DEFINE_PROP_END_OF_LIST(), 2796 }; 2797 2798 static void isabus_fdc_class_init(ObjectClass *klass, void *data) 2799 { 2800 DeviceClass *dc = DEVICE_CLASS(klass); 2801 2802 dc->realize = isabus_fdc_realize; 2803 dc->fw_name = "fdc"; 2804 dc->reset = fdctrl_external_reset_isa; 2805 dc->vmsd = &vmstate_isa_fdc; 2806 device_class_set_props(dc, isa_fdc_properties); 2807 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 2808 } 2809 2810 static void isabus_fdc_instance_init(Object *obj) 2811 { 2812 FDCtrlISABus *isa = ISA_FDC(obj); 2813 2814 device_add_bootindex_property(obj, &isa->bootindexA, 2815 "bootindexA", "/floppy@0", 2816 DEVICE(obj)); 2817 device_add_bootindex_property(obj, &isa->bootindexB, 2818 "bootindexB", "/floppy@1", 2819 DEVICE(obj)); 2820 } 2821 2822 static const TypeInfo isa_fdc_info = { 2823 .name = TYPE_ISA_FDC, 2824 .parent = TYPE_ISA_DEVICE, 2825 .instance_size = sizeof(FDCtrlISABus), 2826 .class_init = isabus_fdc_class_init, 2827 .instance_init = isabus_fdc_instance_init, 2828 }; 2829 2830 static const VMStateDescription vmstate_sysbus_fdc ={ 2831 .name = "fdc", 2832 .version_id = 2, 2833 .minimum_version_id = 2, 2834 .fields = (VMStateField[]) { 2835 VMSTATE_STRUCT(state, FDCtrlSysBus, 0, vmstate_fdc, FDCtrl), 2836 VMSTATE_END_OF_LIST() 2837 } 2838 }; 2839 2840 static Property sysbus_fdc_properties[] = { 2841 DEFINE_PROP_DRIVE("driveA", FDCtrlSysBus, state.qdev_for_drives[0].blk), 2842 DEFINE_PROP_DRIVE("driveB", FDCtrlSysBus, state.qdev_for_drives[1].blk), 2843 DEFINE_PROP_SIGNED("fdtypeA", FDCtrlSysBus, state.qdev_for_drives[0].type, 2844 FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type, 2845 FloppyDriveType), 2846 DEFINE_PROP_SIGNED("fdtypeB", FDCtrlSysBus, state.qdev_for_drives[1].type, 2847 FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type, 2848 FloppyDriveType), 2849 DEFINE_PROP_SIGNED("fallback", FDCtrlISABus, state.fallback, 2850 FLOPPY_DRIVE_TYPE_144, qdev_prop_fdc_drive_type, 2851 FloppyDriveType), 2852 DEFINE_PROP_END_OF_LIST(), 2853 }; 2854 2855 static void sysbus_fdc_class_init(ObjectClass *klass, void *data) 2856 { 2857 DeviceClass *dc = DEVICE_CLASS(klass); 2858 2859 device_class_set_props(dc, sysbus_fdc_properties); 2860 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 2861 } 2862 2863 static const TypeInfo sysbus_fdc_info = { 2864 .name = "sysbus-fdc", 2865 .parent = TYPE_SYSBUS_FDC, 2866 .instance_init = sysbus_fdc_initfn, 2867 .class_init = sysbus_fdc_class_init, 2868 }; 2869 2870 static Property sun4m_fdc_properties[] = { 2871 DEFINE_PROP_DRIVE("drive", FDCtrlSysBus, state.qdev_for_drives[0].blk), 2872 DEFINE_PROP_SIGNED("fdtype", FDCtrlSysBus, state.qdev_for_drives[0].type, 2873 FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type, 2874 FloppyDriveType), 2875 DEFINE_PROP_SIGNED("fallback", FDCtrlISABus, state.fallback, 2876 FLOPPY_DRIVE_TYPE_144, qdev_prop_fdc_drive_type, 2877 FloppyDriveType), 2878 DEFINE_PROP_END_OF_LIST(), 2879 }; 2880 2881 static void sun4m_fdc_class_init(ObjectClass *klass, void *data) 2882 { 2883 DeviceClass *dc = DEVICE_CLASS(klass); 2884 2885 device_class_set_props(dc, sun4m_fdc_properties); 2886 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 2887 } 2888 2889 static const TypeInfo sun4m_fdc_info = { 2890 .name = "SUNW,fdtwo", 2891 .parent = TYPE_SYSBUS_FDC, 2892 .instance_init = sun4m_fdc_initfn, 2893 .class_init = sun4m_fdc_class_init, 2894 }; 2895 2896 static void sysbus_fdc_common_class_init(ObjectClass *klass, void *data) 2897 { 2898 DeviceClass *dc = DEVICE_CLASS(klass); 2899 2900 dc->realize = sysbus_fdc_common_realize; 2901 dc->reset = fdctrl_external_reset_sysbus; 2902 dc->vmsd = &vmstate_sysbus_fdc; 2903 } 2904 2905 static const TypeInfo sysbus_fdc_type_info = { 2906 .name = TYPE_SYSBUS_FDC, 2907 .parent = TYPE_SYS_BUS_DEVICE, 2908 .instance_size = sizeof(FDCtrlSysBus), 2909 .instance_init = sysbus_fdc_common_initfn, 2910 .abstract = true, 2911 .class_init = sysbus_fdc_common_class_init, 2912 }; 2913 2914 static void fdc_register_types(void) 2915 { 2916 type_register_static(&isa_fdc_info); 2917 type_register_static(&sysbus_fdc_type_info); 2918 type_register_static(&sysbus_fdc_info); 2919 type_register_static(&sun4m_fdc_info); 2920 type_register_static(&floppy_bus_info); 2921 type_register_static(&floppy_drive_info); 2922 } 2923 2924 type_init(fdc_register_types) 2925