1 /* 2 * Xilinx Zynq Baseboard System emulation. 3 * 4 * Copyright (c) 2010 Xilinx. 5 * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.croshtwaite@petalogix.com) 6 * Copyright (c) 2012 Petalogix Pty Ltd. 7 * Written by Haibing Ma 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; either version 12 * 2 of the License, or (at your option) any later version. 13 * 14 * You should have received a copy of the GNU General Public License along 15 * with this program; if not, see <http://www.gnu.org/licenses/>. 16 */ 17 18 #include "qemu/osdep.h" 19 #include "qemu/units.h" 20 #include "qapi/error.h" 21 #include "hw/sysbus.h" 22 #include "hw/arm/boot.h" 23 #include "net/net.h" 24 #include "sysemu/sysemu.h" 25 #include "hw/boards.h" 26 #include "hw/block/flash.h" 27 #include "hw/loader.h" 28 #include "hw/adc/zynq-xadc.h" 29 #include "hw/ssi/ssi.h" 30 #include "hw/usb/chipidea.h" 31 #include "qemu/error-report.h" 32 #include "hw/sd/sdhci.h" 33 #include "hw/char/cadence_uart.h" 34 #include "hw/net/cadence_gem.h" 35 #include "hw/cpu/a9mpcore.h" 36 #include "hw/qdev-clock.h" 37 #include "sysemu/reset.h" 38 #include "qom/object.h" 39 #include "exec/tswap.h" 40 #include "target/arm/cpu-qom.h" 41 42 #define TYPE_ZYNQ_MACHINE MACHINE_TYPE_NAME("xilinx-zynq-a9") 43 OBJECT_DECLARE_SIMPLE_TYPE(ZynqMachineState, ZYNQ_MACHINE) 44 45 /* board base frequency: 33.333333 MHz */ 46 #define PS_CLK_FREQUENCY (100 * 1000 * 1000 / 3) 47 48 #define NUM_SPI_FLASHES 4 49 #define NUM_QSPI_FLASHES 2 50 #define NUM_QSPI_BUSSES 2 51 52 #define FLASH_SIZE (64 * 1024 * 1024) 53 #define FLASH_SECTOR_SIZE (128 * 1024) 54 55 #define IRQ_OFFSET 32 /* pic interrupts start from index 32 */ 56 57 #define MPCORE_PERIPHBASE 0xF8F00000 58 #define ZYNQ_BOARD_MIDR 0x413FC090 59 60 static const int dma_irqs[8] = { 61 46, 47, 48, 49, 72, 73, 74, 75 62 }; 63 64 #define BOARD_SETUP_ADDR 0x100 65 66 #define SLCR_LOCK_OFFSET 0x004 67 #define SLCR_UNLOCK_OFFSET 0x008 68 #define SLCR_ARM_PLL_OFFSET 0x100 69 70 #define SLCR_XILINX_UNLOCK_KEY 0xdf0d 71 #define SLCR_XILINX_LOCK_KEY 0x767b 72 73 #define ZYNQ_SDHCI_CAPABILITIES 0x69ec0080 /* Datasheet: UG585 (v1.12.1) */ 74 75 #define ARMV7_IMM16(x) (extract32((x), 0, 12) | \ 76 extract32((x), 12, 4) << 16) 77 78 /* Write immediate val to address r0 + addr. r0 should contain base offset 79 * of the SLCR block. Clobbers r1. 80 */ 81 82 #define SLCR_WRITE(addr, val) \ 83 0xe3001000 + ARMV7_IMM16(extract32((val), 0, 16)), /* movw r1 ... */ \ 84 0xe3401000 + ARMV7_IMM16(extract32((val), 16, 16)), /* movt r1 ... */ \ 85 0xe5801000 + (addr) 86 87 struct ZynqMachineState { 88 MachineState parent; 89 Clock *ps_clk; 90 }; 91 92 static void zynq_write_board_setup(ARMCPU *cpu, 93 const struct arm_boot_info *info) 94 { 95 int n; 96 uint32_t board_setup_blob[] = { 97 0xe3a004f8, /* mov r0, #0xf8000000 */ 98 SLCR_WRITE(SLCR_UNLOCK_OFFSET, SLCR_XILINX_UNLOCK_KEY), 99 SLCR_WRITE(SLCR_ARM_PLL_OFFSET, 0x00014008), 100 SLCR_WRITE(SLCR_LOCK_OFFSET, SLCR_XILINX_LOCK_KEY), 101 0xe12fff1e, /* bx lr */ 102 }; 103 for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) { 104 board_setup_blob[n] = tswap32(board_setup_blob[n]); 105 } 106 rom_add_blob_fixed("board-setup", board_setup_blob, 107 sizeof(board_setup_blob), BOARD_SETUP_ADDR); 108 } 109 110 static struct arm_boot_info zynq_binfo = {}; 111 112 static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq) 113 { 114 DeviceState *dev; 115 SysBusDevice *s; 116 117 dev = qdev_new(TYPE_CADENCE_GEM); 118 if (nd->used) { 119 qemu_check_nic_model(nd, TYPE_CADENCE_GEM); 120 qdev_set_nic_properties(dev, nd); 121 } 122 object_property_set_int(OBJECT(dev), "phy-addr", 7, &error_abort); 123 s = SYS_BUS_DEVICE(dev); 124 sysbus_realize_and_unref(s, &error_fatal); 125 sysbus_mmio_map(s, 0, base); 126 sysbus_connect_irq(s, 0, irq); 127 } 128 129 static inline int zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq, 130 bool is_qspi, int unit0) 131 { 132 int unit = unit0; 133 DeviceState *dev; 134 SysBusDevice *busdev; 135 SSIBus *spi; 136 DeviceState *flash_dev; 137 int i, j; 138 int num_busses = is_qspi ? NUM_QSPI_BUSSES : 1; 139 int num_ss = is_qspi ? NUM_QSPI_FLASHES : NUM_SPI_FLASHES; 140 141 dev = qdev_new(is_qspi ? "xlnx.ps7-qspi" : "xlnx.ps7-spi"); 142 qdev_prop_set_uint8(dev, "num-txrx-bytes", is_qspi ? 4 : 1); 143 qdev_prop_set_uint8(dev, "num-ss-bits", num_ss); 144 qdev_prop_set_uint8(dev, "num-busses", num_busses); 145 busdev = SYS_BUS_DEVICE(dev); 146 sysbus_realize_and_unref(busdev, &error_fatal); 147 sysbus_mmio_map(busdev, 0, base_addr); 148 if (is_qspi) { 149 sysbus_mmio_map(busdev, 1, 0xFC000000); 150 } 151 sysbus_connect_irq(busdev, 0, irq); 152 153 for (i = 0; i < num_busses; ++i) { 154 char bus_name[16]; 155 qemu_irq cs_line; 156 157 snprintf(bus_name, 16, "spi%d", i); 158 spi = (SSIBus *)qdev_get_child_bus(dev, bus_name); 159 160 for (j = 0; j < num_ss; ++j) { 161 DriveInfo *dinfo = drive_get(IF_MTD, 0, unit++); 162 flash_dev = qdev_new("n25q128"); 163 if (dinfo) { 164 qdev_prop_set_drive_err(flash_dev, "drive", 165 blk_by_legacy_dinfo(dinfo), 166 &error_fatal); 167 } 168 qdev_prop_set_uint8(flash_dev, "cs", j); 169 qdev_realize_and_unref(flash_dev, BUS(spi), &error_fatal); 170 171 cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0); 172 sysbus_connect_irq(busdev, i * num_ss + j + 1, cs_line); 173 } 174 } 175 176 return unit; 177 } 178 179 static void zynq_init(MachineState *machine) 180 { 181 ZynqMachineState *zynq_machine = ZYNQ_MACHINE(machine); 182 ARMCPU *cpu; 183 MemoryRegion *address_space_mem = get_system_memory(); 184 MemoryRegion *ocm_ram = g_new(MemoryRegion, 1); 185 DeviceState *dev, *slcr; 186 SysBusDevice *busdev; 187 qemu_irq pic[64]; 188 int n; 189 190 /* max 2GB ram */ 191 if (machine->ram_size > 2 * GiB) { 192 error_report("RAM size more than 2 GiB is not supported"); 193 exit(EXIT_FAILURE); 194 } 195 196 cpu = ARM_CPU(object_new(machine->cpu_type)); 197 198 /* By default A9 CPUs have EL3 enabled. This board does not 199 * currently support EL3 so the CPU EL3 property is disabled before 200 * realization. 201 */ 202 if (object_property_find(OBJECT(cpu), "has_el3")) { 203 object_property_set_bool(OBJECT(cpu), "has_el3", false, &error_fatal); 204 } 205 206 object_property_set_int(OBJECT(cpu), "midr", ZYNQ_BOARD_MIDR, 207 &error_fatal); 208 object_property_set_int(OBJECT(cpu), "reset-cbar", MPCORE_PERIPHBASE, 209 &error_fatal); 210 qdev_realize(DEVICE(cpu), NULL, &error_fatal); 211 212 /* DDR remapped to address zero. */ 213 memory_region_add_subregion(address_space_mem, 0, machine->ram); 214 215 /* 256K of on-chip memory */ 216 memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 * KiB, 217 &error_fatal); 218 memory_region_add_subregion(address_space_mem, 0xFFFC0000, ocm_ram); 219 220 DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0); 221 222 /* AMD */ 223 pflash_cfi02_register(0xe2000000, "zynq.pflash", FLASH_SIZE, 224 dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, 225 FLASH_SECTOR_SIZE, 1, 226 1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa, 227 0); 228 229 /* Create the main clock source, and feed slcr with it */ 230 zynq_machine->ps_clk = CLOCK(object_new(TYPE_CLOCK)); 231 object_property_add_child(OBJECT(zynq_machine), "ps_clk", 232 OBJECT(zynq_machine->ps_clk)); 233 object_unref(OBJECT(zynq_machine->ps_clk)); 234 clock_set_hz(zynq_machine->ps_clk, PS_CLK_FREQUENCY); 235 236 /* Create slcr, keep a pointer to connect clocks */ 237 slcr = qdev_new("xilinx-zynq_slcr"); 238 qdev_connect_clock_in(slcr, "ps_clk", zynq_machine->ps_clk); 239 sysbus_realize_and_unref(SYS_BUS_DEVICE(slcr), &error_fatal); 240 sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000); 241 242 dev = qdev_new(TYPE_A9MPCORE_PRIV); 243 qdev_prop_set_uint32(dev, "num-cpu", 1); 244 busdev = SYS_BUS_DEVICE(dev); 245 sysbus_realize_and_unref(busdev, &error_fatal); 246 sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); 247 sysbus_connect_irq(busdev, 0, 248 qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); 249 250 for (n = 0; n < 64; n++) { 251 pic[n] = qdev_get_gpio_in(dev, n); 252 } 253 254 n = zynq_init_spi_flashes(0xE0006000, pic[58 - IRQ_OFFSET], false, 0); 255 n = zynq_init_spi_flashes(0xE0007000, pic[81 - IRQ_OFFSET], false, n); 256 n = zynq_init_spi_flashes(0xE000D000, pic[51 - IRQ_OFFSET], true, n); 257 258 sysbus_create_simple(TYPE_CHIPIDEA, 0xE0002000, pic[53 - IRQ_OFFSET]); 259 sysbus_create_simple(TYPE_CHIPIDEA, 0xE0003000, pic[76 - IRQ_OFFSET]); 260 261 dev = qdev_new(TYPE_CADENCE_UART); 262 busdev = SYS_BUS_DEVICE(dev); 263 qdev_prop_set_chr(dev, "chardev", serial_hd(0)); 264 qdev_connect_clock_in(dev, "refclk", 265 qdev_get_clock_out(slcr, "uart0_ref_clk")); 266 sysbus_realize_and_unref(busdev, &error_fatal); 267 sysbus_mmio_map(busdev, 0, 0xE0000000); 268 sysbus_connect_irq(busdev, 0, pic[59 - IRQ_OFFSET]); 269 dev = qdev_new(TYPE_CADENCE_UART); 270 busdev = SYS_BUS_DEVICE(dev); 271 qdev_prop_set_chr(dev, "chardev", serial_hd(1)); 272 qdev_connect_clock_in(dev, "refclk", 273 qdev_get_clock_out(slcr, "uart1_ref_clk")); 274 sysbus_realize_and_unref(busdev, &error_fatal); 275 sysbus_mmio_map(busdev, 0, 0xE0001000); 276 sysbus_connect_irq(busdev, 0, pic[82 - IRQ_OFFSET]); 277 278 sysbus_create_varargs("cadence_ttc", 0xF8001000, 279 pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL); 280 sysbus_create_varargs("cadence_ttc", 0xF8002000, 281 pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL); 282 283 gem_init(&nd_table[0], 0xE000B000, pic[54-IRQ_OFFSET]); 284 gem_init(&nd_table[1], 0xE000C000, pic[77-IRQ_OFFSET]); 285 286 for (n = 0; n < 2; n++) { 287 int hci_irq = n ? 79 : 56; 288 hwaddr hci_addr = n ? 0xE0101000 : 0xE0100000; 289 DriveInfo *di; 290 BlockBackend *blk; 291 DeviceState *carddev; 292 293 /* Compatible with: 294 * - SD Host Controller Specification Version 2.0 Part A2 295 * - SDIO Specification Version 2.0 296 * - MMC Specification Version 3.31 297 */ 298 dev = qdev_new(TYPE_SYSBUS_SDHCI); 299 qdev_prop_set_uint8(dev, "sd-spec-version", 2); 300 qdev_prop_set_uint64(dev, "capareg", ZYNQ_SDHCI_CAPABILITIES); 301 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 302 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, hci_addr); 303 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[hci_irq - IRQ_OFFSET]); 304 305 di = drive_get(IF_SD, 0, n); 306 blk = di ? blk_by_legacy_dinfo(di) : NULL; 307 carddev = qdev_new(TYPE_SD_CARD); 308 qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal); 309 qdev_realize_and_unref(carddev, qdev_get_child_bus(dev, "sd-bus"), 310 &error_fatal); 311 } 312 313 dev = qdev_new(TYPE_ZYNQ_XADC); 314 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 315 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8007100); 316 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[39-IRQ_OFFSET]); 317 318 dev = qdev_new("pl330"); 319 object_property_set_link(OBJECT(dev), "memory", 320 OBJECT(address_space_mem), 321 &error_fatal); 322 qdev_prop_set_uint8(dev, "num_chnls", 8); 323 qdev_prop_set_uint8(dev, "num_periph_req", 4); 324 qdev_prop_set_uint8(dev, "num_events", 16); 325 326 qdev_prop_set_uint8(dev, "data_width", 64); 327 qdev_prop_set_uint8(dev, "wr_cap", 8); 328 qdev_prop_set_uint8(dev, "wr_q_dep", 16); 329 qdev_prop_set_uint8(dev, "rd_cap", 8); 330 qdev_prop_set_uint8(dev, "rd_q_dep", 16); 331 qdev_prop_set_uint16(dev, "data_buffer_dep", 256); 332 333 busdev = SYS_BUS_DEVICE(dev); 334 sysbus_realize_and_unref(busdev, &error_fatal); 335 sysbus_mmio_map(busdev, 0, 0xF8003000); 336 sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */ 337 for (n = 0; n < ARRAY_SIZE(dma_irqs); ++n) { /* event irqs */ 338 sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]); 339 } 340 341 dev = qdev_new("xlnx.ps7-dev-cfg"); 342 busdev = SYS_BUS_DEVICE(dev); 343 sysbus_realize_and_unref(busdev, &error_fatal); 344 sysbus_connect_irq(busdev, 0, pic[40 - IRQ_OFFSET]); 345 sysbus_mmio_map(busdev, 0, 0xF8007000); 346 347 zynq_binfo.ram_size = machine->ram_size; 348 zynq_binfo.board_id = 0xd32; 349 zynq_binfo.loader_start = 0; 350 zynq_binfo.board_setup_addr = BOARD_SETUP_ADDR; 351 zynq_binfo.write_board_setup = zynq_write_board_setup; 352 353 arm_load_kernel(cpu, machine, &zynq_binfo); 354 } 355 356 static void zynq_machine_class_init(ObjectClass *oc, void *data) 357 { 358 static const char * const valid_cpu_types[] = { 359 ARM_CPU_TYPE_NAME("cortex-a9"), 360 NULL 361 }; 362 MachineClass *mc = MACHINE_CLASS(oc); 363 mc->desc = "Xilinx Zynq Platform Baseboard for Cortex-A9"; 364 mc->init = zynq_init; 365 mc->max_cpus = 1; 366 mc->no_sdcard = 1; 367 mc->ignore_memory_transaction_failures = true; 368 mc->valid_cpu_types = valid_cpu_types; 369 mc->default_ram_id = "zynq.ext_ram"; 370 } 371 372 static const TypeInfo zynq_machine_type = { 373 .name = TYPE_ZYNQ_MACHINE, 374 .parent = TYPE_MACHINE, 375 .class_init = zynq_machine_class_init, 376 .instance_size = sizeof(ZynqMachineState), 377 }; 378 379 static void zynq_machine_register_types(void) 380 { 381 type_register_static(&zynq_machine_type); 382 } 383 384 type_init(zynq_machine_register_types) 385