1 /* 2 * Xilinx Zynq Baseboard System emulation. 3 * 4 * Copyright (c) 2010 Xilinx. 5 * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.croshtwaite@petalogix.com) 6 * Copyright (c) 2012 Petalogix Pty Ltd. 7 * Written by Haibing Ma 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; either version 12 * 2 of the License, or (at your option) any later version. 13 * 14 * You should have received a copy of the GNU General Public License along 15 * with this program; if not, see <http://www.gnu.org/licenses/>. 16 */ 17 18 #include "qemu/osdep.h" 19 #include "qapi/error.h" 20 #include "qemu-common.h" 21 #include "cpu.h" 22 #include "hw/sysbus.h" 23 #include "hw/arm/boot.h" 24 #include "net/net.h" 25 #include "exec/address-spaces.h" 26 #include "sysemu/sysemu.h" 27 #include "hw/boards.h" 28 #include "hw/block/flash.h" 29 #include "hw/loader.h" 30 #include "hw/misc/zynq-xadc.h" 31 #include "hw/ssi/ssi.h" 32 #include "qemu/error-report.h" 33 #include "hw/sd/sdhci.h" 34 #include "hw/char/cadence_uart.h" 35 #include "hw/net/cadence_gem.h" 36 #include "hw/cpu/a9mpcore.h" 37 38 #define NUM_SPI_FLASHES 4 39 #define NUM_QSPI_FLASHES 2 40 #define NUM_QSPI_BUSSES 2 41 42 #define FLASH_SIZE (64 * 1024 * 1024) 43 #define FLASH_SECTOR_SIZE (128 * 1024) 44 45 #define IRQ_OFFSET 32 /* pic interrupts start from index 32 */ 46 47 #define MPCORE_PERIPHBASE 0xF8F00000 48 #define ZYNQ_BOARD_MIDR 0x413FC090 49 50 static const int dma_irqs[8] = { 51 46, 47, 48, 49, 72, 73, 74, 75 52 }; 53 54 #define BOARD_SETUP_ADDR 0x100 55 56 #define SLCR_LOCK_OFFSET 0x004 57 #define SLCR_UNLOCK_OFFSET 0x008 58 #define SLCR_ARM_PLL_OFFSET 0x100 59 60 #define SLCR_XILINX_UNLOCK_KEY 0xdf0d 61 #define SLCR_XILINX_LOCK_KEY 0x767b 62 63 #define ZYNQ_SDHCI_CAPABILITIES 0x69ec0080 /* Datasheet: UG585 (v1.12.1) */ 64 65 #define ARMV7_IMM16(x) (extract32((x), 0, 12) | \ 66 extract32((x), 12, 4) << 16) 67 68 /* Write immediate val to address r0 + addr. r0 should contain base offset 69 * of the SLCR block. Clobbers r1. 70 */ 71 72 #define SLCR_WRITE(addr, val) \ 73 0xe3001000 + ARMV7_IMM16(extract32((val), 0, 16)), /* movw r1 ... */ \ 74 0xe3401000 + ARMV7_IMM16(extract32((val), 16, 16)), /* movt r1 ... */ \ 75 0xe5801000 + (addr) 76 77 static void zynq_write_board_setup(ARMCPU *cpu, 78 const struct arm_boot_info *info) 79 { 80 int n; 81 uint32_t board_setup_blob[] = { 82 0xe3a004f8, /* mov r0, #0xf8000000 */ 83 SLCR_WRITE(SLCR_UNLOCK_OFFSET, SLCR_XILINX_UNLOCK_KEY), 84 SLCR_WRITE(SLCR_ARM_PLL_OFFSET, 0x00014008), 85 SLCR_WRITE(SLCR_LOCK_OFFSET, SLCR_XILINX_LOCK_KEY), 86 0xe12fff1e, /* bx lr */ 87 }; 88 for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) { 89 board_setup_blob[n] = tswap32(board_setup_blob[n]); 90 } 91 rom_add_blob_fixed("board-setup", board_setup_blob, 92 sizeof(board_setup_blob), BOARD_SETUP_ADDR); 93 } 94 95 static struct arm_boot_info zynq_binfo = {}; 96 97 static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq) 98 { 99 DeviceState *dev; 100 SysBusDevice *s; 101 102 dev = qdev_create(NULL, TYPE_CADENCE_GEM); 103 if (nd->used) { 104 qemu_check_nic_model(nd, TYPE_CADENCE_GEM); 105 qdev_set_nic_properties(dev, nd); 106 } 107 qdev_init_nofail(dev); 108 s = SYS_BUS_DEVICE(dev); 109 sysbus_mmio_map(s, 0, base); 110 sysbus_connect_irq(s, 0, irq); 111 } 112 113 static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq, 114 bool is_qspi) 115 { 116 DeviceState *dev; 117 SysBusDevice *busdev; 118 SSIBus *spi; 119 DeviceState *flash_dev; 120 int i, j; 121 int num_busses = is_qspi ? NUM_QSPI_BUSSES : 1; 122 int num_ss = is_qspi ? NUM_QSPI_FLASHES : NUM_SPI_FLASHES; 123 124 dev = qdev_create(NULL, is_qspi ? "xlnx.ps7-qspi" : "xlnx.ps7-spi"); 125 qdev_prop_set_uint8(dev, "num-txrx-bytes", is_qspi ? 4 : 1); 126 qdev_prop_set_uint8(dev, "num-ss-bits", num_ss); 127 qdev_prop_set_uint8(dev, "num-busses", num_busses); 128 qdev_init_nofail(dev); 129 busdev = SYS_BUS_DEVICE(dev); 130 sysbus_mmio_map(busdev, 0, base_addr); 131 if (is_qspi) { 132 sysbus_mmio_map(busdev, 1, 0xFC000000); 133 } 134 sysbus_connect_irq(busdev, 0, irq); 135 136 for (i = 0; i < num_busses; ++i) { 137 char bus_name[16]; 138 qemu_irq cs_line; 139 140 snprintf(bus_name, 16, "spi%d", i); 141 spi = (SSIBus *)qdev_get_child_bus(dev, bus_name); 142 143 for (j = 0; j < num_ss; ++j) { 144 DriveInfo *dinfo = drive_get_next(IF_MTD); 145 flash_dev = ssi_create_slave_no_init(spi, "n25q128"); 146 if (dinfo) { 147 qdev_prop_set_drive(flash_dev, "drive", 148 blk_by_legacy_dinfo(dinfo), &error_fatal); 149 } 150 qdev_init_nofail(flash_dev); 151 152 cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0); 153 sysbus_connect_irq(busdev, i * num_ss + j + 1, cs_line); 154 } 155 } 156 157 } 158 159 static void zynq_init(MachineState *machine) 160 { 161 ram_addr_t ram_size = machine->ram_size; 162 const char *kernel_filename = machine->kernel_filename; 163 const char *kernel_cmdline = machine->kernel_cmdline; 164 const char *initrd_filename = machine->initrd_filename; 165 ARMCPU *cpu; 166 MemoryRegion *address_space_mem = get_system_memory(); 167 MemoryRegion *ext_ram = g_new(MemoryRegion, 1); 168 MemoryRegion *ocm_ram = g_new(MemoryRegion, 1); 169 DeviceState *dev; 170 SysBusDevice *busdev; 171 qemu_irq pic[64]; 172 int n; 173 174 cpu = ARM_CPU(object_new(machine->cpu_type)); 175 176 /* By default A9 CPUs have EL3 enabled. This board does not 177 * currently support EL3 so the CPU EL3 property is disabled before 178 * realization. 179 */ 180 if (object_property_find(OBJECT(cpu), "has_el3", NULL)) { 181 object_property_set_bool(OBJECT(cpu), false, "has_el3", &error_fatal); 182 } 183 184 object_property_set_int(OBJECT(cpu), ZYNQ_BOARD_MIDR, "midr", 185 &error_fatal); 186 object_property_set_int(OBJECT(cpu), MPCORE_PERIPHBASE, "reset-cbar", 187 &error_fatal); 188 object_property_set_bool(OBJECT(cpu), true, "realized", &error_fatal); 189 190 /* max 2GB ram */ 191 if (ram_size > 0x80000000) { 192 ram_size = 0x80000000; 193 } 194 195 /* DDR remapped to address zero. */ 196 memory_region_allocate_system_memory(ext_ram, NULL, "zynq.ext_ram", 197 ram_size); 198 memory_region_add_subregion(address_space_mem, 0, ext_ram); 199 200 /* 256K of on-chip memory */ 201 memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 << 10, 202 &error_fatal); 203 memory_region_add_subregion(address_space_mem, 0xFFFC0000, ocm_ram); 204 205 DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0); 206 207 /* AMD */ 208 pflash_cfi02_register(0xe2000000, "zynq.pflash", FLASH_SIZE, 209 dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, 210 FLASH_SECTOR_SIZE, 1, 211 1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa, 212 0); 213 214 dev = qdev_create(NULL, "xilinx,zynq_slcr"); 215 qdev_init_nofail(dev); 216 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8000000); 217 218 dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV); 219 qdev_prop_set_uint32(dev, "num-cpu", 1); 220 qdev_init_nofail(dev); 221 busdev = SYS_BUS_DEVICE(dev); 222 sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); 223 sysbus_connect_irq(busdev, 0, 224 qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); 225 226 for (n = 0; n < 64; n++) { 227 pic[n] = qdev_get_gpio_in(dev, n); 228 } 229 230 zynq_init_spi_flashes(0xE0006000, pic[58-IRQ_OFFSET], false); 231 zynq_init_spi_flashes(0xE0007000, pic[81-IRQ_OFFSET], false); 232 zynq_init_spi_flashes(0xE000D000, pic[51-IRQ_OFFSET], true); 233 234 sysbus_create_simple("xlnx,ps7-usb", 0xE0002000, pic[53-IRQ_OFFSET]); 235 sysbus_create_simple("xlnx,ps7-usb", 0xE0003000, pic[76-IRQ_OFFSET]); 236 237 cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0)); 238 cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1)); 239 240 sysbus_create_varargs("cadence_ttc", 0xF8001000, 241 pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL); 242 sysbus_create_varargs("cadence_ttc", 0xF8002000, 243 pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL); 244 245 gem_init(&nd_table[0], 0xE000B000, pic[54-IRQ_OFFSET]); 246 gem_init(&nd_table[1], 0xE000C000, pic[77-IRQ_OFFSET]); 247 248 for (n = 0; n < 2; n++) { 249 int hci_irq = n ? 79 : 56; 250 hwaddr hci_addr = n ? 0xE0101000 : 0xE0100000; 251 DriveInfo *di; 252 BlockBackend *blk; 253 DeviceState *carddev; 254 255 /* Compatible with: 256 * - SD Host Controller Specification Version 2.0 Part A2 257 * - SDIO Specification Version 2.0 258 * - MMC Specification Version 3.31 259 */ 260 dev = qdev_create(NULL, TYPE_SYSBUS_SDHCI); 261 qdev_prop_set_uint8(dev, "sd-spec-version", 2); 262 qdev_prop_set_uint64(dev, "capareg", ZYNQ_SDHCI_CAPABILITIES); 263 qdev_init_nofail(dev); 264 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, hci_addr); 265 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[hci_irq - IRQ_OFFSET]); 266 267 di = drive_get_next(IF_SD); 268 blk = di ? blk_by_legacy_dinfo(di) : NULL; 269 carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD); 270 qdev_prop_set_drive(carddev, "drive", blk, &error_fatal); 271 object_property_set_bool(OBJECT(carddev), true, "realized", 272 &error_fatal); 273 } 274 275 dev = qdev_create(NULL, TYPE_ZYNQ_XADC); 276 qdev_init_nofail(dev); 277 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8007100); 278 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[39-IRQ_OFFSET]); 279 280 dev = qdev_create(NULL, "pl330"); 281 qdev_prop_set_uint8(dev, "num_chnls", 8); 282 qdev_prop_set_uint8(dev, "num_periph_req", 4); 283 qdev_prop_set_uint8(dev, "num_events", 16); 284 285 qdev_prop_set_uint8(dev, "data_width", 64); 286 qdev_prop_set_uint8(dev, "wr_cap", 8); 287 qdev_prop_set_uint8(dev, "wr_q_dep", 16); 288 qdev_prop_set_uint8(dev, "rd_cap", 8); 289 qdev_prop_set_uint8(dev, "rd_q_dep", 16); 290 qdev_prop_set_uint16(dev, "data_buffer_dep", 256); 291 292 qdev_init_nofail(dev); 293 busdev = SYS_BUS_DEVICE(dev); 294 sysbus_mmio_map(busdev, 0, 0xF8003000); 295 sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */ 296 for (n = 0; n < ARRAY_SIZE(dma_irqs); ++n) { /* event irqs */ 297 sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]); 298 } 299 300 dev = qdev_create(NULL, "xlnx.ps7-dev-cfg"); 301 qdev_init_nofail(dev); 302 busdev = SYS_BUS_DEVICE(dev); 303 sysbus_connect_irq(busdev, 0, pic[40 - IRQ_OFFSET]); 304 sysbus_mmio_map(busdev, 0, 0xF8007000); 305 306 zynq_binfo.ram_size = ram_size; 307 zynq_binfo.kernel_filename = kernel_filename; 308 zynq_binfo.kernel_cmdline = kernel_cmdline; 309 zynq_binfo.initrd_filename = initrd_filename; 310 zynq_binfo.nb_cpus = 1; 311 zynq_binfo.board_id = 0xd32; 312 zynq_binfo.loader_start = 0; 313 zynq_binfo.board_setup_addr = BOARD_SETUP_ADDR; 314 zynq_binfo.write_board_setup = zynq_write_board_setup; 315 316 arm_load_kernel(ARM_CPU(first_cpu), &zynq_binfo); 317 } 318 319 static void zynq_machine_init(MachineClass *mc) 320 { 321 mc->desc = "Xilinx Zynq Platform Baseboard for Cortex-A9"; 322 mc->init = zynq_init; 323 mc->max_cpus = 1; 324 mc->no_sdcard = 1; 325 mc->ignore_memory_transaction_failures = true; 326 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); 327 } 328 329 DEFINE_MACHINE("xilinx-zynq-a9", zynq_machine_init) 330