1 /* 2 * ARM Versatile Express emulation. 3 * 4 * Copyright (c) 2010 - 2011 B Labs Ltd. 5 * Copyright (c) 2011 Linaro Limited 6 * Written by Bahadir Balban, Amit Mahajan, Peter Maydell 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 * 20 * Contributions after 2012-01-13 are licensed under the terms of the 21 * GNU GPL, version 2 or (at your option) any later version. 22 */ 23 24 #include "qemu/osdep.h" 25 #include "qapi/error.h" 26 #include "qemu/datadir.h" 27 #include "cpu.h" 28 #include "hw/sysbus.h" 29 #include "hw/arm/boot.h" 30 #include "hw/arm/primecell.h" 31 #include "hw/net/lan9118.h" 32 #include "hw/i2c/i2c.h" 33 #include "net/net.h" 34 #include "sysemu/sysemu.h" 35 #include "hw/boards.h" 36 #include "hw/loader.h" 37 #include "hw/block/flash.h" 38 #include "sysemu/device_tree.h" 39 #include "qemu/error-report.h" 40 #include <libfdt.h> 41 #include "hw/char/pl011.h" 42 #include "hw/cpu/a9mpcore.h" 43 #include "hw/cpu/a15mpcore.h" 44 #include "hw/i2c/arm_sbcon_i2c.h" 45 #include "hw/sd/sd.h" 46 #include "qom/object.h" 47 48 #define VEXPRESS_BOARD_ID 0x8e0 49 #define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024) 50 #define VEXPRESS_FLASH_SECT_SIZE (256 * 1024) 51 52 /* Number of virtio transports to create (0..8; limited by 53 * number of available IRQ lines). 54 */ 55 #define NUM_VIRTIO_TRANSPORTS 4 56 57 /* Address maps for peripherals: 58 * the Versatile Express motherboard has two possible maps, 59 * the "legacy" one (used for A9) and the "Cortex-A Series" 60 * map (used for newer cores). 61 * Individual daughterboards can also have different maps for 62 * their peripherals. 63 */ 64 65 enum { 66 VE_SYSREGS, 67 VE_SP810, 68 VE_SERIALPCI, 69 VE_PL041, 70 VE_MMCI, 71 VE_KMI0, 72 VE_KMI1, 73 VE_UART0, 74 VE_UART1, 75 VE_UART2, 76 VE_UART3, 77 VE_WDT, 78 VE_TIMER01, 79 VE_TIMER23, 80 VE_SERIALDVI, 81 VE_RTC, 82 VE_COMPACTFLASH, 83 VE_CLCD, 84 VE_NORFLASH0, 85 VE_NORFLASH1, 86 VE_NORFLASHALIAS, 87 VE_SRAM, 88 VE_VIDEORAM, 89 VE_ETHERNET, 90 VE_USB, 91 VE_DAPROM, 92 VE_VIRTIO, 93 }; 94 95 static hwaddr motherboard_legacy_map[] = { 96 [VE_NORFLASHALIAS] = 0, 97 /* CS7: 0x10000000 .. 0x10020000 */ 98 [VE_SYSREGS] = 0x10000000, 99 [VE_SP810] = 0x10001000, 100 [VE_SERIALPCI] = 0x10002000, 101 [VE_PL041] = 0x10004000, 102 [VE_MMCI] = 0x10005000, 103 [VE_KMI0] = 0x10006000, 104 [VE_KMI1] = 0x10007000, 105 [VE_UART0] = 0x10009000, 106 [VE_UART1] = 0x1000a000, 107 [VE_UART2] = 0x1000b000, 108 [VE_UART3] = 0x1000c000, 109 [VE_WDT] = 0x1000f000, 110 [VE_TIMER01] = 0x10011000, 111 [VE_TIMER23] = 0x10012000, 112 [VE_VIRTIO] = 0x10013000, 113 [VE_SERIALDVI] = 0x10016000, 114 [VE_RTC] = 0x10017000, 115 [VE_COMPACTFLASH] = 0x1001a000, 116 [VE_CLCD] = 0x1001f000, 117 /* CS0: 0x40000000 .. 0x44000000 */ 118 [VE_NORFLASH0] = 0x40000000, 119 /* CS1: 0x44000000 .. 0x48000000 */ 120 [VE_NORFLASH1] = 0x44000000, 121 /* CS2: 0x48000000 .. 0x4a000000 */ 122 [VE_SRAM] = 0x48000000, 123 /* CS3: 0x4c000000 .. 0x50000000 */ 124 [VE_VIDEORAM] = 0x4c000000, 125 [VE_ETHERNET] = 0x4e000000, 126 [VE_USB] = 0x4f000000, 127 }; 128 129 static hwaddr motherboard_aseries_map[] = { 130 [VE_NORFLASHALIAS] = 0, 131 /* CS0: 0x08000000 .. 0x0c000000 */ 132 [VE_NORFLASH0] = 0x08000000, 133 /* CS4: 0x0c000000 .. 0x10000000 */ 134 [VE_NORFLASH1] = 0x0c000000, 135 /* CS5: 0x10000000 .. 0x14000000 */ 136 /* CS1: 0x14000000 .. 0x18000000 */ 137 [VE_SRAM] = 0x14000000, 138 /* CS2: 0x18000000 .. 0x1c000000 */ 139 [VE_VIDEORAM] = 0x18000000, 140 [VE_ETHERNET] = 0x1a000000, 141 [VE_USB] = 0x1b000000, 142 /* CS3: 0x1c000000 .. 0x20000000 */ 143 [VE_DAPROM] = 0x1c000000, 144 [VE_SYSREGS] = 0x1c010000, 145 [VE_SP810] = 0x1c020000, 146 [VE_SERIALPCI] = 0x1c030000, 147 [VE_PL041] = 0x1c040000, 148 [VE_MMCI] = 0x1c050000, 149 [VE_KMI0] = 0x1c060000, 150 [VE_KMI1] = 0x1c070000, 151 [VE_UART0] = 0x1c090000, 152 [VE_UART1] = 0x1c0a0000, 153 [VE_UART2] = 0x1c0b0000, 154 [VE_UART3] = 0x1c0c0000, 155 [VE_WDT] = 0x1c0f0000, 156 [VE_TIMER01] = 0x1c110000, 157 [VE_TIMER23] = 0x1c120000, 158 [VE_VIRTIO] = 0x1c130000, 159 [VE_SERIALDVI] = 0x1c160000, 160 [VE_RTC] = 0x1c170000, 161 [VE_COMPACTFLASH] = 0x1c1a0000, 162 [VE_CLCD] = 0x1c1f0000, 163 }; 164 165 /* Structure defining the peculiarities of a specific daughterboard */ 166 167 typedef struct VEDBoardInfo VEDBoardInfo; 168 169 struct VexpressMachineClass { 170 MachineClass parent; 171 VEDBoardInfo *daughterboard; 172 }; 173 174 struct VexpressMachineState { 175 MachineState parent; 176 bool secure; 177 bool virt; 178 }; 179 180 #define TYPE_VEXPRESS_MACHINE "vexpress" 181 #define TYPE_VEXPRESS_A9_MACHINE MACHINE_TYPE_NAME("vexpress-a9") 182 #define TYPE_VEXPRESS_A15_MACHINE MACHINE_TYPE_NAME("vexpress-a15") 183 OBJECT_DECLARE_TYPE(VexpressMachineState, VexpressMachineClass, VEXPRESS_MACHINE) 184 185 typedef void DBoardInitFn(const VexpressMachineState *machine, 186 ram_addr_t ram_size, 187 const char *cpu_type, 188 qemu_irq *pic); 189 190 struct VEDBoardInfo { 191 struct arm_boot_info bootinfo; 192 const hwaddr *motherboard_map; 193 hwaddr loader_start; 194 const hwaddr gic_cpu_if_addr; 195 uint32_t proc_id; 196 uint32_t num_voltage_sensors; 197 const uint32_t *voltages; 198 uint32_t num_clocks; 199 const uint32_t *clocks; 200 DBoardInitFn *init; 201 }; 202 203 static void init_cpus(MachineState *ms, const char *cpu_type, 204 const char *privdev, hwaddr periphbase, 205 qemu_irq *pic, bool secure, bool virt) 206 { 207 DeviceState *dev; 208 SysBusDevice *busdev; 209 int n; 210 unsigned int smp_cpus = ms->smp.cpus; 211 212 /* Create the actual CPUs */ 213 for (n = 0; n < smp_cpus; n++) { 214 Object *cpuobj = object_new(cpu_type); 215 216 if (!secure) { 217 object_property_set_bool(cpuobj, "has_el3", false, NULL); 218 } 219 if (!virt) { 220 if (object_property_find(cpuobj, "has_el2")) { 221 object_property_set_bool(cpuobj, "has_el2", false, NULL); 222 } 223 } 224 225 if (object_property_find(cpuobj, "reset-cbar")) { 226 object_property_set_int(cpuobj, "reset-cbar", periphbase, 227 &error_abort); 228 } 229 qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); 230 } 231 232 /* Create the private peripheral devices (including the GIC); 233 * this must happen after the CPUs are created because a15mpcore_priv 234 * wires itself up to the CPU's generic_timer gpio out lines. 235 */ 236 dev = qdev_new(privdev); 237 qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); 238 busdev = SYS_BUS_DEVICE(dev); 239 sysbus_realize_and_unref(busdev, &error_fatal); 240 sysbus_mmio_map(busdev, 0, periphbase); 241 242 /* Interrupts [42:0] are from the motherboard; 243 * [47:43] are reserved; [63:48] are daughterboard 244 * peripherals. Note that some documentation numbers 245 * external interrupts starting from 32 (because there 246 * are internal interrupts 0..31). 247 */ 248 for (n = 0; n < 64; n++) { 249 pic[n] = qdev_get_gpio_in(dev, n); 250 } 251 252 /* Connect the CPUs to the GIC */ 253 for (n = 0; n < smp_cpus; n++) { 254 DeviceState *cpudev = DEVICE(qemu_get_cpu(n)); 255 256 sysbus_connect_irq(busdev, n, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); 257 sysbus_connect_irq(busdev, n + smp_cpus, 258 qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); 259 sysbus_connect_irq(busdev, n + 2 * smp_cpus, 260 qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); 261 sysbus_connect_irq(busdev, n + 3 * smp_cpus, 262 qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); 263 } 264 } 265 266 static void a9_daughterboard_init(const VexpressMachineState *vms, 267 ram_addr_t ram_size, 268 const char *cpu_type, 269 qemu_irq *pic) 270 { 271 MachineState *machine = MACHINE(vms); 272 MemoryRegion *sysmem = get_system_memory(); 273 MemoryRegion *lowram = g_new(MemoryRegion, 1); 274 ram_addr_t low_ram_size; 275 276 if (ram_size > 0x40000000) { 277 /* 1GB is the maximum the address space permits */ 278 error_report("vexpress-a9: cannot model more than 1GB RAM"); 279 exit(1); 280 } 281 282 low_ram_size = ram_size; 283 if (low_ram_size > 0x4000000) { 284 low_ram_size = 0x4000000; 285 } 286 /* RAM is from 0x60000000 upwards. The bottom 64MB of the 287 * address space should in theory be remappable to various 288 * things including ROM or RAM; we always map the RAM there. 289 */ 290 memory_region_init_alias(lowram, NULL, "vexpress.lowmem", machine->ram, 291 0, low_ram_size); 292 memory_region_add_subregion(sysmem, 0x0, lowram); 293 memory_region_add_subregion(sysmem, 0x60000000, machine->ram); 294 295 /* 0x1e000000 A9MPCore (SCU) private memory region */ 296 init_cpus(machine, cpu_type, TYPE_A9MPCORE_PRIV, 0x1e000000, pic, 297 vms->secure, vms->virt); 298 299 /* Daughterboard peripherals : 0x10020000 .. 0x20000000 */ 300 301 /* 0x10020000 PL111 CLCD (daughterboard) */ 302 sysbus_create_simple("pl111", 0x10020000, pic[44]); 303 304 /* 0x10060000 AXI RAM */ 305 /* 0x100e0000 PL341 Dynamic Memory Controller */ 306 /* 0x100e1000 PL354 Static Memory Controller */ 307 /* 0x100e2000 System Configuration Controller */ 308 309 sysbus_create_simple("sp804", 0x100e4000, pic[48]); 310 /* 0x100e5000 SP805 Watchdog module */ 311 /* 0x100e6000 BP147 TrustZone Protection Controller */ 312 /* 0x100e9000 PL301 'Fast' AXI matrix */ 313 /* 0x100ea000 PL301 'Slow' AXI matrix */ 314 /* 0x100ec000 TrustZone Address Space Controller */ 315 /* 0x10200000 CoreSight debug APB */ 316 /* 0x1e00a000 PL310 L2 Cache Controller */ 317 sysbus_create_varargs("l2x0", 0x1e00a000, NULL); 318 } 319 320 /* Voltage values for SYS_CFG_VOLT daughterboard registers; 321 * values are in microvolts. 322 */ 323 static const uint32_t a9_voltages[] = { 324 1000000, /* VD10 : 1.0V : SoC internal logic voltage */ 325 1000000, /* VD10_S2 : 1.0V : PL310, L2 cache, RAM, non-PL310 logic */ 326 1000000, /* VD10_S3 : 1.0V : Cortex-A9, cores, MPEs, SCU, PL310 logic */ 327 1800000, /* VCC1V8 : 1.8V : DDR2 SDRAM, test chip DDR2 I/O supply */ 328 900000, /* DDR2VTT : 0.9V : DDR2 SDRAM VTT termination voltage */ 329 3300000, /* VCC3V3 : 3.3V : local board supply for misc external logic */ 330 }; 331 332 /* Reset values for daughterboard oscillators (in Hz) */ 333 static const uint32_t a9_clocks[] = { 334 45000000, /* AMBA AXI ACLK: 45MHz */ 335 23750000, /* daughterboard CLCD clock: 23.75MHz */ 336 66670000, /* Test chip reference clock: 66.67MHz */ 337 }; 338 339 static VEDBoardInfo a9_daughterboard = { 340 .motherboard_map = motherboard_legacy_map, 341 .loader_start = 0x60000000, 342 .gic_cpu_if_addr = 0x1e000100, 343 .proc_id = 0x0c000191, 344 .num_voltage_sensors = ARRAY_SIZE(a9_voltages), 345 .voltages = a9_voltages, 346 .num_clocks = ARRAY_SIZE(a9_clocks), 347 .clocks = a9_clocks, 348 .init = a9_daughterboard_init, 349 }; 350 351 static void a15_daughterboard_init(const VexpressMachineState *vms, 352 ram_addr_t ram_size, 353 const char *cpu_type, 354 qemu_irq *pic) 355 { 356 MachineState *machine = MACHINE(vms); 357 MemoryRegion *sysmem = get_system_memory(); 358 MemoryRegion *sram = g_new(MemoryRegion, 1); 359 360 { 361 /* We have to use a separate 64 bit variable here to avoid the gcc 362 * "comparison is always false due to limited range of data type" 363 * warning if we are on a host where ram_addr_t is 32 bits. 364 */ 365 uint64_t rsz = ram_size; 366 if (rsz > (30ULL * 1024 * 1024 * 1024)) { 367 error_report("vexpress-a15: cannot model more than 30GB RAM"); 368 exit(1); 369 } 370 } 371 372 /* RAM is from 0x80000000 upwards; there is no low-memory alias for it. */ 373 memory_region_add_subregion(sysmem, 0x80000000, machine->ram); 374 375 /* 0x2c000000 A15MPCore private memory region (GIC) */ 376 init_cpus(machine, cpu_type, TYPE_A15MPCORE_PRIV, 377 0x2c000000, pic, vms->secure, vms->virt); 378 379 /* A15 daughterboard peripherals: */ 380 381 /* 0x20000000: CoreSight interfaces: not modelled */ 382 /* 0x2a000000: PL301 AXI interconnect: not modelled */ 383 /* 0x2a420000: SCC: not modelled */ 384 /* 0x2a430000: system counter: not modelled */ 385 /* 0x2b000000: HDLCD controller: not modelled */ 386 /* 0x2b060000: SP805 watchdog: not modelled */ 387 /* 0x2b0a0000: PL341 dynamic memory controller: not modelled */ 388 /* 0x2e000000: system SRAM */ 389 memory_region_init_ram(sram, NULL, "vexpress.a15sram", 0x10000, 390 &error_fatal); 391 memory_region_add_subregion(sysmem, 0x2e000000, sram); 392 393 /* 0x7ffb0000: DMA330 DMA controller: not modelled */ 394 /* 0x7ffd0000: PL354 static memory controller: not modelled */ 395 } 396 397 static const uint32_t a15_voltages[] = { 398 900000, /* Vcore: 0.9V : CPU core voltage */ 399 }; 400 401 static const uint32_t a15_clocks[] = { 402 60000000, /* OSCCLK0: 60MHz : CPU_CLK reference */ 403 0, /* OSCCLK1: reserved */ 404 0, /* OSCCLK2: reserved */ 405 0, /* OSCCLK3: reserved */ 406 40000000, /* OSCCLK4: 40MHz : external AXI master clock */ 407 23750000, /* OSCCLK5: 23.75MHz : HDLCD PLL reference */ 408 50000000, /* OSCCLK6: 50MHz : static memory controller clock */ 409 60000000, /* OSCCLK7: 60MHz : SYSCLK reference */ 410 40000000, /* OSCCLK8: 40MHz : DDR2 PLL reference */ 411 }; 412 413 static VEDBoardInfo a15_daughterboard = { 414 .motherboard_map = motherboard_aseries_map, 415 .loader_start = 0x80000000, 416 .gic_cpu_if_addr = 0x2c002000, 417 .proc_id = 0x14000237, 418 .num_voltage_sensors = ARRAY_SIZE(a15_voltages), 419 .voltages = a15_voltages, 420 .num_clocks = ARRAY_SIZE(a15_clocks), 421 .clocks = a15_clocks, 422 .init = a15_daughterboard_init, 423 }; 424 425 static int add_virtio_mmio_node(void *fdt, uint32_t acells, uint32_t scells, 426 hwaddr addr, hwaddr size, uint32_t intc, 427 int irq) 428 { 429 /* Add a virtio_mmio node to the device tree blob: 430 * virtio_mmio@ADDRESS { 431 * compatible = "virtio,mmio"; 432 * reg = <ADDRESS, SIZE>; 433 * interrupt-parent = <&intc>; 434 * interrupts = <0, irq, 1>; 435 * } 436 * (Note that the format of the interrupts property is dependent on the 437 * interrupt controller that interrupt-parent points to; these are for 438 * the ARM GIC and indicate an SPI interrupt, rising-edge-triggered.) 439 */ 440 int rc; 441 char *nodename = g_strdup_printf("/virtio_mmio@%" PRIx64, addr); 442 443 rc = qemu_fdt_add_subnode(fdt, nodename); 444 rc |= qemu_fdt_setprop_string(fdt, nodename, 445 "compatible", "virtio,mmio"); 446 rc |= qemu_fdt_setprop_sized_cells(fdt, nodename, "reg", 447 acells, addr, scells, size); 448 qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", intc); 449 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 0, irq, 1); 450 qemu_fdt_setprop(fdt, nodename, "dma-coherent", NULL, 0); 451 g_free(nodename); 452 if (rc) { 453 return -1; 454 } 455 return 0; 456 } 457 458 static uint32_t find_int_controller(void *fdt) 459 { 460 /* Find the FDT node corresponding to the interrupt controller 461 * for virtio-mmio devices. We do this by scanning the fdt for 462 * a node with the right compatibility, since we know there is 463 * only one GIC on a vexpress board. 464 * We return the phandle of the node, or 0 if none was found. 465 */ 466 const char *compat = "arm,cortex-a9-gic"; 467 int offset; 468 469 offset = fdt_node_offset_by_compatible(fdt, -1, compat); 470 if (offset >= 0) { 471 return fdt_get_phandle(fdt, offset); 472 } 473 return 0; 474 } 475 476 static void vexpress_modify_dtb(const struct arm_boot_info *info, void *fdt) 477 { 478 uint32_t acells, scells, intc; 479 const VEDBoardInfo *daughterboard = (const VEDBoardInfo *)info; 480 481 acells = qemu_fdt_getprop_cell(fdt, "/", "#address-cells", 482 NULL, &error_fatal); 483 scells = qemu_fdt_getprop_cell(fdt, "/", "#size-cells", 484 NULL, &error_fatal); 485 intc = find_int_controller(fdt); 486 if (!intc) { 487 /* Not fatal, we just won't provide virtio. This will 488 * happen with older device tree blobs. 489 */ 490 warn_report("couldn't find interrupt controller in " 491 "dtb; will not include virtio-mmio devices in the dtb"); 492 } else { 493 int i; 494 const hwaddr *map = daughterboard->motherboard_map; 495 496 /* We iterate backwards here because adding nodes 497 * to the dtb puts them in last-first. 498 */ 499 for (i = NUM_VIRTIO_TRANSPORTS - 1; i >= 0; i--) { 500 add_virtio_mmio_node(fdt, acells, scells, 501 map[VE_VIRTIO] + 0x200 * i, 502 0x200, intc, 40 + i); 503 } 504 } 505 } 506 507 508 /* Open code a private version of pflash registration since we 509 * need to set non-default device width for VExpress platform. 510 */ 511 static PFlashCFI01 *ve_pflash_cfi01_register(hwaddr base, const char *name, 512 DriveInfo *di) 513 { 514 DeviceState *dev = qdev_new(TYPE_PFLASH_CFI01); 515 516 if (di) { 517 qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(di)); 518 } 519 520 qdev_prop_set_uint32(dev, "num-blocks", 521 VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE); 522 qdev_prop_set_uint64(dev, "sector-length", VEXPRESS_FLASH_SECT_SIZE); 523 qdev_prop_set_uint8(dev, "width", 4); 524 qdev_prop_set_uint8(dev, "device-width", 2); 525 qdev_prop_set_bit(dev, "big-endian", false); 526 qdev_prop_set_uint16(dev, "id0", 0x89); 527 qdev_prop_set_uint16(dev, "id1", 0x18); 528 qdev_prop_set_uint16(dev, "id2", 0x00); 529 qdev_prop_set_uint16(dev, "id3", 0x00); 530 qdev_prop_set_string(dev, "name", name); 531 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 532 533 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 534 return PFLASH_CFI01(dev); 535 } 536 537 static void vexpress_common_init(MachineState *machine) 538 { 539 VexpressMachineState *vms = VEXPRESS_MACHINE(machine); 540 VexpressMachineClass *vmc = VEXPRESS_MACHINE_GET_CLASS(machine); 541 VEDBoardInfo *daughterboard = vmc->daughterboard; 542 DeviceState *dev, *sysctl, *pl041; 543 qemu_irq pic[64]; 544 uint32_t sys_id; 545 DriveInfo *dinfo; 546 PFlashCFI01 *pflash0; 547 I2CBus *i2c; 548 ram_addr_t vram_size, sram_size; 549 MemoryRegion *sysmem = get_system_memory(); 550 MemoryRegion *vram = g_new(MemoryRegion, 1); 551 MemoryRegion *sram = g_new(MemoryRegion, 1); 552 MemoryRegion *flashalias = g_new(MemoryRegion, 1); 553 MemoryRegion *flash0mem; 554 const hwaddr *map = daughterboard->motherboard_map; 555 int i; 556 557 daughterboard->init(vms, machine->ram_size, machine->cpu_type, pic); 558 559 /* 560 * If a bios file was provided, attempt to map it into memory 561 */ 562 if (machine->firmware) { 563 char *fn; 564 int image_size; 565 566 if (drive_get(IF_PFLASH, 0, 0)) { 567 error_report("The contents of the first flash device may be " 568 "specified with -bios or with -drive if=pflash... " 569 "but you cannot use both options at once"); 570 exit(1); 571 } 572 fn = qemu_find_file(QEMU_FILE_TYPE_BIOS, machine->firmware); 573 if (!fn) { 574 error_report("Could not find ROM image '%s'", machine->firmware); 575 exit(1); 576 } 577 image_size = load_image_targphys(fn, map[VE_NORFLASH0], 578 VEXPRESS_FLASH_SIZE); 579 g_free(fn); 580 if (image_size < 0) { 581 error_report("Could not load ROM image '%s'", machine->firmware); 582 exit(1); 583 } 584 } 585 586 /* Motherboard peripherals: the wiring is the same but the 587 * addresses vary between the legacy and A-Series memory maps. 588 */ 589 590 sys_id = 0x1190f500; 591 592 sysctl = qdev_new("realview_sysctl"); 593 qdev_prop_set_uint32(sysctl, "sys_id", sys_id); 594 qdev_prop_set_uint32(sysctl, "proc_id", daughterboard->proc_id); 595 qdev_prop_set_uint32(sysctl, "len-db-voltage", 596 daughterboard->num_voltage_sensors); 597 for (i = 0; i < daughterboard->num_voltage_sensors; i++) { 598 char *propname = g_strdup_printf("db-voltage[%d]", i); 599 qdev_prop_set_uint32(sysctl, propname, daughterboard->voltages[i]); 600 g_free(propname); 601 } 602 qdev_prop_set_uint32(sysctl, "len-db-clock", 603 daughterboard->num_clocks); 604 for (i = 0; i < daughterboard->num_clocks; i++) { 605 char *propname = g_strdup_printf("db-clock[%d]", i); 606 qdev_prop_set_uint32(sysctl, propname, daughterboard->clocks[i]); 607 g_free(propname); 608 } 609 sysbus_realize_and_unref(SYS_BUS_DEVICE(sysctl), &error_fatal); 610 sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, map[VE_SYSREGS]); 611 612 /* VE_SP810: not modelled */ 613 /* VE_SERIALPCI: not modelled */ 614 615 pl041 = qdev_new("pl041"); 616 qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512); 617 sysbus_realize_and_unref(SYS_BUS_DEVICE(pl041), &error_fatal); 618 sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, map[VE_PL041]); 619 sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[11]); 620 621 dev = sysbus_create_varargs("pl181", map[VE_MMCI], pic[9], pic[10], NULL); 622 /* Wire up MMC card detect and read-only signals */ 623 qdev_connect_gpio_out_named(dev, "card-read-only", 0, 624 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT)); 625 qdev_connect_gpio_out_named(dev, "card-inserted", 0, 626 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN)); 627 dinfo = drive_get(IF_SD, 0, 0); 628 if (dinfo) { 629 DeviceState *card; 630 631 card = qdev_new(TYPE_SD_CARD); 632 qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), 633 &error_fatal); 634 qdev_realize_and_unref(card, qdev_get_child_bus(dev, "sd-bus"), 635 &error_fatal); 636 } 637 638 sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]); 639 sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]); 640 641 pl011_create(map[VE_UART0], pic[5], serial_hd(0)); 642 pl011_create(map[VE_UART1], pic[6], serial_hd(1)); 643 pl011_create(map[VE_UART2], pic[7], serial_hd(2)); 644 pl011_create(map[VE_UART3], pic[8], serial_hd(3)); 645 646 sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]); 647 sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]); 648 649 dev = sysbus_create_simple(TYPE_VERSATILE_I2C, map[VE_SERIALDVI], NULL); 650 i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); 651 i2c_slave_create_simple(i2c, "sii9022", 0x39); 652 653 sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */ 654 655 /* VE_COMPACTFLASH: not modelled */ 656 657 sysbus_create_simple("pl111", map[VE_CLCD], pic[14]); 658 659 dinfo = drive_get(IF_PFLASH, 0, 0); 660 pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0", 661 dinfo); 662 if (!pflash0) { 663 error_report("vexpress: error registering flash 0"); 664 exit(1); 665 } 666 667 if (map[VE_NORFLASHALIAS] != -1) { 668 /* Map flash 0 as an alias into low memory */ 669 flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0); 670 memory_region_init_alias(flashalias, NULL, "vexpress.flashalias", 671 flash0mem, 0, VEXPRESS_FLASH_SIZE); 672 memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], flashalias); 673 } 674 675 dinfo = drive_get(IF_PFLASH, 0, 1); 676 if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", 677 dinfo)) { 678 error_report("vexpress: error registering flash 1"); 679 exit(1); 680 } 681 682 sram_size = 0x2000000; 683 memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size, 684 &error_fatal); 685 memory_region_add_subregion(sysmem, map[VE_SRAM], sram); 686 687 vram_size = 0x800000; 688 memory_region_init_ram(vram, NULL, "vexpress.vram", vram_size, 689 &error_fatal); 690 memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram); 691 692 /* 0x4e000000 LAN9118 Ethernet */ 693 if (nd_table[0].used) { 694 lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]); 695 } 696 697 /* VE_USB: not modelled */ 698 699 /* VE_DAPROM: not modelled */ 700 701 /* Create mmio transports, so the user can create virtio backends 702 * (which will be automatically plugged in to the transports). If 703 * no backend is created the transport will just sit harmlessly idle. 704 */ 705 for (i = 0; i < NUM_VIRTIO_TRANSPORTS; i++) { 706 sysbus_create_simple("virtio-mmio", map[VE_VIRTIO] + 0x200 * i, 707 pic[40 + i]); 708 } 709 710 daughterboard->bootinfo.ram_size = machine->ram_size; 711 daughterboard->bootinfo.nb_cpus = machine->smp.cpus; 712 daughterboard->bootinfo.board_id = VEXPRESS_BOARD_ID; 713 daughterboard->bootinfo.loader_start = daughterboard->loader_start; 714 daughterboard->bootinfo.smp_loader_start = map[VE_SRAM]; 715 daughterboard->bootinfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30; 716 daughterboard->bootinfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr; 717 daughterboard->bootinfo.modify_dtb = vexpress_modify_dtb; 718 /* When booting Linux we should be in secure state if the CPU has one. */ 719 daughterboard->bootinfo.secure_boot = vms->secure; 720 arm_load_kernel(ARM_CPU(first_cpu), machine, &daughterboard->bootinfo); 721 } 722 723 static bool vexpress_get_secure(Object *obj, Error **errp) 724 { 725 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 726 727 return vms->secure; 728 } 729 730 static void vexpress_set_secure(Object *obj, bool value, Error **errp) 731 { 732 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 733 734 vms->secure = value; 735 } 736 737 static bool vexpress_get_virt(Object *obj, Error **errp) 738 { 739 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 740 741 return vms->virt; 742 } 743 744 static void vexpress_set_virt(Object *obj, bool value, Error **errp) 745 { 746 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 747 748 vms->virt = value; 749 } 750 751 static void vexpress_instance_init(Object *obj) 752 { 753 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 754 755 /* EL3 is enabled by default on vexpress */ 756 vms->secure = true; 757 } 758 759 static void vexpress_a15_instance_init(Object *obj) 760 { 761 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 762 763 /* 764 * For the vexpress-a15, EL2 is by default enabled if EL3 is, 765 * but can also be specifically set to on or off. 766 */ 767 vms->virt = true; 768 } 769 770 static void vexpress_a9_instance_init(Object *obj) 771 { 772 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 773 774 /* The A9 doesn't have the virt extensions */ 775 vms->virt = false; 776 } 777 778 static void vexpress_class_init(ObjectClass *oc, void *data) 779 { 780 MachineClass *mc = MACHINE_CLASS(oc); 781 782 mc->desc = "ARM Versatile Express"; 783 mc->init = vexpress_common_init; 784 mc->max_cpus = 4; 785 mc->ignore_memory_transaction_failures = true; 786 mc->default_ram_id = "vexpress.highmem"; 787 788 object_class_property_add_bool(oc, "secure", vexpress_get_secure, 789 vexpress_set_secure); 790 object_class_property_set_description(oc, "secure", 791 "Set on/off to enable/disable the ARM " 792 "Security Extensions (TrustZone)"); 793 } 794 795 static void vexpress_a9_class_init(ObjectClass *oc, void *data) 796 { 797 MachineClass *mc = MACHINE_CLASS(oc); 798 VexpressMachineClass *vmc = VEXPRESS_MACHINE_CLASS(oc); 799 800 mc->desc = "ARM Versatile Express for Cortex-A9"; 801 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); 802 803 vmc->daughterboard = &a9_daughterboard; 804 } 805 806 static void vexpress_a15_class_init(ObjectClass *oc, void *data) 807 { 808 MachineClass *mc = MACHINE_CLASS(oc); 809 VexpressMachineClass *vmc = VEXPRESS_MACHINE_CLASS(oc); 810 811 mc->desc = "ARM Versatile Express for Cortex-A15"; 812 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); 813 814 vmc->daughterboard = &a15_daughterboard; 815 816 object_class_property_add_bool(oc, "virtualization", vexpress_get_virt, 817 vexpress_set_virt); 818 object_class_property_set_description(oc, "virtualization", 819 "Set on/off to enable/disable the ARM " 820 "Virtualization Extensions " 821 "(defaults to same as 'secure')"); 822 823 } 824 825 static const TypeInfo vexpress_info = { 826 .name = TYPE_VEXPRESS_MACHINE, 827 .parent = TYPE_MACHINE, 828 .abstract = true, 829 .instance_size = sizeof(VexpressMachineState), 830 .instance_init = vexpress_instance_init, 831 .class_size = sizeof(VexpressMachineClass), 832 .class_init = vexpress_class_init, 833 }; 834 835 static const TypeInfo vexpress_a9_info = { 836 .name = TYPE_VEXPRESS_A9_MACHINE, 837 .parent = TYPE_VEXPRESS_MACHINE, 838 .class_init = vexpress_a9_class_init, 839 .instance_init = vexpress_a9_instance_init, 840 }; 841 842 static const TypeInfo vexpress_a15_info = { 843 .name = TYPE_VEXPRESS_A15_MACHINE, 844 .parent = TYPE_VEXPRESS_MACHINE, 845 .class_init = vexpress_a15_class_init, 846 .instance_init = vexpress_a15_instance_init, 847 }; 848 849 static void vexpress_machine_init(void) 850 { 851 type_register_static(&vexpress_info); 852 type_register_static(&vexpress_a9_info); 853 type_register_static(&vexpress_a15_info); 854 } 855 856 type_init(vexpress_machine_init); 857