1 /* 2 * ARM Versatile Express emulation. 3 * 4 * Copyright (c) 2010 - 2011 B Labs Ltd. 5 * Copyright (c) 2011 Linaro Limited 6 * Written by Bahadir Balban, Amit Mahajan, Peter Maydell 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 * 20 * Contributions after 2012-01-13 are licensed under the terms of the 21 * GNU GPL, version 2 or (at your option) any later version. 22 */ 23 24 #include "qemu/osdep.h" 25 #include "qapi/error.h" 26 #include "qemu/datadir.h" 27 #include "hw/sysbus.h" 28 #include "hw/arm/boot.h" 29 #include "hw/arm/primecell.h" 30 #include "hw/net/lan9118.h" 31 #include "hw/i2c/i2c.h" 32 #include "net/net.h" 33 #include "sysemu/sysemu.h" 34 #include "hw/boards.h" 35 #include "hw/loader.h" 36 #include "hw/block/flash.h" 37 #include "sysemu/device_tree.h" 38 #include "qemu/error-report.h" 39 #include <libfdt.h> 40 #include "hw/char/pl011.h" 41 #include "hw/cpu/a9mpcore.h" 42 #include "hw/cpu/a15mpcore.h" 43 #include "hw/i2c/arm_sbcon_i2c.h" 44 #include "hw/sd/sd.h" 45 #include "qapi/qmp/qlist.h" 46 #include "qom/object.h" 47 #include "audio/audio.h" 48 #include "target/arm/cpu-qom.h" 49 50 #define VEXPRESS_BOARD_ID 0x8e0 51 #define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024) 52 #define VEXPRESS_FLASH_SECT_SIZE (256 * 1024) 53 54 /* Number of virtio transports to create (0..8; limited by 55 * number of available IRQ lines). 56 */ 57 #define NUM_VIRTIO_TRANSPORTS 4 58 59 /* Address maps for peripherals: 60 * the Versatile Express motherboard has two possible maps, 61 * the "legacy" one (used for A9) and the "Cortex-A Series" 62 * map (used for newer cores). 63 * Individual daughterboards can also have different maps for 64 * their peripherals. 65 */ 66 67 enum { 68 VE_SYSREGS, 69 VE_SP810, 70 VE_SERIALPCI, 71 VE_PL041, 72 VE_MMCI, 73 VE_KMI0, 74 VE_KMI1, 75 VE_UART0, 76 VE_UART1, 77 VE_UART2, 78 VE_UART3, 79 VE_WDT, 80 VE_TIMER01, 81 VE_TIMER23, 82 VE_SERIALDVI, 83 VE_RTC, 84 VE_COMPACTFLASH, 85 VE_CLCD, 86 VE_NORFLASH0, 87 VE_NORFLASH1, 88 VE_NORFLASHALIAS, 89 VE_SRAM, 90 VE_VIDEORAM, 91 VE_ETHERNET, 92 VE_USB, 93 VE_DAPROM, 94 VE_VIRTIO, 95 }; 96 97 static hwaddr motherboard_legacy_map[] = { 98 [VE_NORFLASHALIAS] = 0, 99 /* CS7: 0x10000000 .. 0x10020000 */ 100 [VE_SYSREGS] = 0x10000000, 101 [VE_SP810] = 0x10001000, 102 [VE_SERIALPCI] = 0x10002000, 103 [VE_PL041] = 0x10004000, 104 [VE_MMCI] = 0x10005000, 105 [VE_KMI0] = 0x10006000, 106 [VE_KMI1] = 0x10007000, 107 [VE_UART0] = 0x10009000, 108 [VE_UART1] = 0x1000a000, 109 [VE_UART2] = 0x1000b000, 110 [VE_UART3] = 0x1000c000, 111 [VE_WDT] = 0x1000f000, 112 [VE_TIMER01] = 0x10011000, 113 [VE_TIMER23] = 0x10012000, 114 [VE_VIRTIO] = 0x10013000, 115 [VE_SERIALDVI] = 0x10016000, 116 [VE_RTC] = 0x10017000, 117 [VE_COMPACTFLASH] = 0x1001a000, 118 [VE_CLCD] = 0x1001f000, 119 /* CS0: 0x40000000 .. 0x44000000 */ 120 [VE_NORFLASH0] = 0x40000000, 121 /* CS1: 0x44000000 .. 0x48000000 */ 122 [VE_NORFLASH1] = 0x44000000, 123 /* CS2: 0x48000000 .. 0x4a000000 */ 124 [VE_SRAM] = 0x48000000, 125 /* CS3: 0x4c000000 .. 0x50000000 */ 126 [VE_VIDEORAM] = 0x4c000000, 127 [VE_ETHERNET] = 0x4e000000, 128 [VE_USB] = 0x4f000000, 129 }; 130 131 static hwaddr motherboard_aseries_map[] = { 132 [VE_NORFLASHALIAS] = 0, 133 /* CS0: 0x08000000 .. 0x0c000000 */ 134 [VE_NORFLASH0] = 0x08000000, 135 /* CS4: 0x0c000000 .. 0x10000000 */ 136 [VE_NORFLASH1] = 0x0c000000, 137 /* CS5: 0x10000000 .. 0x14000000 */ 138 /* CS1: 0x14000000 .. 0x18000000 */ 139 [VE_SRAM] = 0x14000000, 140 /* CS2: 0x18000000 .. 0x1c000000 */ 141 [VE_VIDEORAM] = 0x18000000, 142 [VE_ETHERNET] = 0x1a000000, 143 [VE_USB] = 0x1b000000, 144 /* CS3: 0x1c000000 .. 0x20000000 */ 145 [VE_DAPROM] = 0x1c000000, 146 [VE_SYSREGS] = 0x1c010000, 147 [VE_SP810] = 0x1c020000, 148 [VE_SERIALPCI] = 0x1c030000, 149 [VE_PL041] = 0x1c040000, 150 [VE_MMCI] = 0x1c050000, 151 [VE_KMI0] = 0x1c060000, 152 [VE_KMI1] = 0x1c070000, 153 [VE_UART0] = 0x1c090000, 154 [VE_UART1] = 0x1c0a0000, 155 [VE_UART2] = 0x1c0b0000, 156 [VE_UART3] = 0x1c0c0000, 157 [VE_WDT] = 0x1c0f0000, 158 [VE_TIMER01] = 0x1c110000, 159 [VE_TIMER23] = 0x1c120000, 160 [VE_VIRTIO] = 0x1c130000, 161 [VE_SERIALDVI] = 0x1c160000, 162 [VE_RTC] = 0x1c170000, 163 [VE_COMPACTFLASH] = 0x1c1a0000, 164 [VE_CLCD] = 0x1c1f0000, 165 }; 166 167 /* Structure defining the peculiarities of a specific daughterboard */ 168 169 typedef struct VEDBoardInfo VEDBoardInfo; 170 171 struct VexpressMachineClass { 172 MachineClass parent; 173 VEDBoardInfo *daughterboard; 174 }; 175 176 struct VexpressMachineState { 177 MachineState parent; 178 MemoryRegion vram; 179 MemoryRegion sram; 180 MemoryRegion flashalias; 181 MemoryRegion a15sram; 182 bool secure; 183 bool virt; 184 }; 185 186 #define TYPE_VEXPRESS_MACHINE "vexpress" 187 #define TYPE_VEXPRESS_A9_MACHINE MACHINE_TYPE_NAME("vexpress-a9") 188 #define TYPE_VEXPRESS_A15_MACHINE MACHINE_TYPE_NAME("vexpress-a15") 189 OBJECT_DECLARE_TYPE(VexpressMachineState, VexpressMachineClass, VEXPRESS_MACHINE) 190 191 typedef void DBoardInitFn(VexpressMachineState *machine, 192 ram_addr_t ram_size, 193 const char *cpu_type, 194 qemu_irq *pic); 195 196 struct VEDBoardInfo { 197 struct arm_boot_info bootinfo; 198 const hwaddr *motherboard_map; 199 hwaddr loader_start; 200 const hwaddr gic_cpu_if_addr; 201 uint32_t proc_id; 202 uint32_t num_voltage_sensors; 203 const uint32_t *voltages; 204 uint32_t num_clocks; 205 const uint32_t *clocks; 206 DBoardInitFn *init; 207 }; 208 209 static void init_cpus(MachineState *ms, const char *cpu_type, 210 const char *privdev, hwaddr periphbase, 211 qemu_irq *pic, bool secure, bool virt) 212 { 213 DeviceState *dev; 214 SysBusDevice *busdev; 215 int n; 216 unsigned int smp_cpus = ms->smp.cpus; 217 218 /* Create the actual CPUs */ 219 for (n = 0; n < smp_cpus; n++) { 220 Object *cpuobj = object_new(cpu_type); 221 222 if (!secure) { 223 object_property_set_bool(cpuobj, "has_el3", false, NULL); 224 } 225 if (!virt) { 226 if (object_property_find(cpuobj, "has_el2")) { 227 object_property_set_bool(cpuobj, "has_el2", false, NULL); 228 } 229 } 230 231 if (object_property_find(cpuobj, "reset-cbar")) { 232 object_property_set_int(cpuobj, "reset-cbar", periphbase, 233 &error_abort); 234 } 235 qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); 236 } 237 238 /* Create the private peripheral devices (including the GIC); 239 * this must happen after the CPUs are created because a15mpcore_priv 240 * wires itself up to the CPU's generic_timer gpio out lines. 241 */ 242 dev = qdev_new(privdev); 243 qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); 244 busdev = SYS_BUS_DEVICE(dev); 245 sysbus_realize_and_unref(busdev, &error_fatal); 246 sysbus_mmio_map(busdev, 0, periphbase); 247 248 /* Interrupts [42:0] are from the motherboard; 249 * [47:43] are reserved; [63:48] are daughterboard 250 * peripherals. Note that some documentation numbers 251 * external interrupts starting from 32 (because there 252 * are internal interrupts 0..31). 253 */ 254 for (n = 0; n < 64; n++) { 255 pic[n] = qdev_get_gpio_in(dev, n); 256 } 257 258 /* Connect the CPUs to the GIC */ 259 for (n = 0; n < smp_cpus; n++) { 260 DeviceState *cpudev = DEVICE(qemu_get_cpu(n)); 261 262 sysbus_connect_irq(busdev, n, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); 263 sysbus_connect_irq(busdev, n + smp_cpus, 264 qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); 265 sysbus_connect_irq(busdev, n + 2 * smp_cpus, 266 qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); 267 sysbus_connect_irq(busdev, n + 3 * smp_cpus, 268 qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); 269 } 270 } 271 272 static void a9_daughterboard_init(VexpressMachineState *vms, 273 ram_addr_t ram_size, 274 const char *cpu_type, 275 qemu_irq *pic) 276 { 277 MachineState *machine = MACHINE(vms); 278 MemoryRegion *sysmem = get_system_memory(); 279 DeviceState *dev; 280 281 if (ram_size > 0x40000000) { 282 /* 1GB is the maximum the address space permits */ 283 error_report("vexpress-a9: cannot model more than 1GB RAM"); 284 exit(1); 285 } 286 287 /* 288 * RAM is from 0x60000000 upwards. The bottom 64MB of the 289 * address space should in theory be remappable to various 290 * things including ROM or RAM; we always map the flash there. 291 */ 292 memory_region_add_subregion(sysmem, 0x60000000, machine->ram); 293 294 /* 0x1e000000 A9MPCore (SCU) private memory region */ 295 init_cpus(machine, cpu_type, TYPE_A9MPCORE_PRIV, 0x1e000000, pic, 296 vms->secure, vms->virt); 297 298 /* Daughterboard peripherals : 0x10020000 .. 0x20000000 */ 299 300 /* 0x10020000 PL111 CLCD (daughterboard) */ 301 dev = qdev_new("pl111"); 302 object_property_set_link(OBJECT(dev), "framebuffer-memory", 303 OBJECT(sysmem), &error_fatal); 304 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 305 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x10020000); 306 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[44]); 307 308 /* 0x10060000 AXI RAM */ 309 /* 0x100e0000 PL341 Dynamic Memory Controller */ 310 /* 0x100e1000 PL354 Static Memory Controller */ 311 /* 0x100e2000 System Configuration Controller */ 312 313 sysbus_create_simple("sp804", 0x100e4000, pic[48]); 314 /* 0x100e5000 SP805 Watchdog module */ 315 /* 0x100e6000 BP147 TrustZone Protection Controller */ 316 /* 0x100e9000 PL301 'Fast' AXI matrix */ 317 /* 0x100ea000 PL301 'Slow' AXI matrix */ 318 /* 0x100ec000 TrustZone Address Space Controller */ 319 /* 0x10200000 CoreSight debug APB */ 320 /* 0x1e00a000 PL310 L2 Cache Controller */ 321 sysbus_create_varargs("l2x0", 0x1e00a000, NULL); 322 } 323 324 /* Voltage values for SYS_CFG_VOLT daughterboard registers; 325 * values are in microvolts. 326 */ 327 static const uint32_t a9_voltages[] = { 328 1000000, /* VD10 : 1.0V : SoC internal logic voltage */ 329 1000000, /* VD10_S2 : 1.0V : PL310, L2 cache, RAM, non-PL310 logic */ 330 1000000, /* VD10_S3 : 1.0V : Cortex-A9, cores, MPEs, SCU, PL310 logic */ 331 1800000, /* VCC1V8 : 1.8V : DDR2 SDRAM, test chip DDR2 I/O supply */ 332 900000, /* DDR2VTT : 0.9V : DDR2 SDRAM VTT termination voltage */ 333 3300000, /* VCC3V3 : 3.3V : local board supply for misc external logic */ 334 }; 335 336 /* Reset values for daughterboard oscillators (in Hz) */ 337 static const uint32_t a9_clocks[] = { 338 45000000, /* AMBA AXI ACLK: 45MHz */ 339 23750000, /* daughterboard CLCD clock: 23.75MHz */ 340 66670000, /* Test chip reference clock: 66.67MHz */ 341 }; 342 343 static VEDBoardInfo a9_daughterboard = { 344 .motherboard_map = motherboard_legacy_map, 345 .loader_start = 0x60000000, 346 .gic_cpu_if_addr = 0x1e000100, 347 .proc_id = 0x0c000191, 348 .num_voltage_sensors = ARRAY_SIZE(a9_voltages), 349 .voltages = a9_voltages, 350 .num_clocks = ARRAY_SIZE(a9_clocks), 351 .clocks = a9_clocks, 352 .init = a9_daughterboard_init, 353 }; 354 355 static void a15_daughterboard_init(VexpressMachineState *vms, 356 ram_addr_t ram_size, 357 const char *cpu_type, 358 qemu_irq *pic) 359 { 360 MachineState *machine = MACHINE(vms); 361 MemoryRegion *sysmem = get_system_memory(); 362 363 { 364 /* We have to use a separate 64 bit variable here to avoid the gcc 365 * "comparison is always false due to limited range of data type" 366 * warning if we are on a host where ram_addr_t is 32 bits. 367 */ 368 uint64_t rsz = ram_size; 369 if (rsz > (30ULL * 1024 * 1024 * 1024)) { 370 error_report("vexpress-a15: cannot model more than 30GB RAM"); 371 exit(1); 372 } 373 } 374 375 /* RAM is from 0x80000000 upwards; there is no low-memory alias for it. */ 376 memory_region_add_subregion(sysmem, 0x80000000, machine->ram); 377 378 /* 0x2c000000 A15MPCore private memory region (GIC) */ 379 init_cpus(machine, cpu_type, TYPE_A15MPCORE_PRIV, 380 0x2c000000, pic, vms->secure, vms->virt); 381 382 /* A15 daughterboard peripherals: */ 383 384 /* 0x20000000: CoreSight interfaces: not modelled */ 385 /* 0x2a000000: PL301 AXI interconnect: not modelled */ 386 /* 0x2a420000: SCC: not modelled */ 387 /* 0x2a430000: system counter: not modelled */ 388 /* 0x2b000000: HDLCD controller: not modelled */ 389 /* 0x2b060000: SP805 watchdog: not modelled */ 390 /* 0x2b0a0000: PL341 dynamic memory controller: not modelled */ 391 /* 0x2e000000: system SRAM */ 392 memory_region_init_ram(&vms->a15sram, NULL, "vexpress.a15sram", 0x10000, 393 &error_fatal); 394 memory_region_add_subregion(sysmem, 0x2e000000, &vms->a15sram); 395 396 /* 0x7ffb0000: DMA330 DMA controller: not modelled */ 397 /* 0x7ffd0000: PL354 static memory controller: not modelled */ 398 } 399 400 static const uint32_t a15_voltages[] = { 401 900000, /* Vcore: 0.9V : CPU core voltage */ 402 }; 403 404 static const uint32_t a15_clocks[] = { 405 60000000, /* OSCCLK0: 60MHz : CPU_CLK reference */ 406 0, /* OSCCLK1: reserved */ 407 0, /* OSCCLK2: reserved */ 408 0, /* OSCCLK3: reserved */ 409 40000000, /* OSCCLK4: 40MHz : external AXI master clock */ 410 23750000, /* OSCCLK5: 23.75MHz : HDLCD PLL reference */ 411 50000000, /* OSCCLK6: 50MHz : static memory controller clock */ 412 60000000, /* OSCCLK7: 60MHz : SYSCLK reference */ 413 40000000, /* OSCCLK8: 40MHz : DDR2 PLL reference */ 414 }; 415 416 static VEDBoardInfo a15_daughterboard = { 417 .motherboard_map = motherboard_aseries_map, 418 .loader_start = 0x80000000, 419 .gic_cpu_if_addr = 0x2c002000, 420 .proc_id = 0x14000237, 421 .num_voltage_sensors = ARRAY_SIZE(a15_voltages), 422 .voltages = a15_voltages, 423 .num_clocks = ARRAY_SIZE(a15_clocks), 424 .clocks = a15_clocks, 425 .init = a15_daughterboard_init, 426 }; 427 428 static int add_virtio_mmio_node(void *fdt, uint32_t acells, uint32_t scells, 429 hwaddr addr, hwaddr size, uint32_t intc, 430 int irq) 431 { 432 /* Add a virtio_mmio node to the device tree blob: 433 * virtio_mmio@ADDRESS { 434 * compatible = "virtio,mmio"; 435 * reg = <ADDRESS, SIZE>; 436 * interrupt-parent = <&intc>; 437 * interrupts = <0, irq, 1>; 438 * } 439 * (Note that the format of the interrupts property is dependent on the 440 * interrupt controller that interrupt-parent points to; these are for 441 * the ARM GIC and indicate an SPI interrupt, rising-edge-triggered.) 442 */ 443 int rc; 444 char *nodename = g_strdup_printf("/virtio_mmio@%" PRIx64, addr); 445 446 rc = qemu_fdt_add_subnode(fdt, nodename); 447 rc |= qemu_fdt_setprop_string(fdt, nodename, 448 "compatible", "virtio,mmio"); 449 rc |= qemu_fdt_setprop_sized_cells(fdt, nodename, "reg", 450 acells, addr, scells, size); 451 qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", intc); 452 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 0, irq, 1); 453 qemu_fdt_setprop(fdt, nodename, "dma-coherent", NULL, 0); 454 g_free(nodename); 455 if (rc) { 456 return -1; 457 } 458 return 0; 459 } 460 461 static uint32_t find_int_controller(void *fdt) 462 { 463 /* Find the FDT node corresponding to the interrupt controller 464 * for virtio-mmio devices. We do this by scanning the fdt for 465 * a node with the right compatibility, since we know there is 466 * only one GIC on a vexpress board. 467 * We return the phandle of the node, or 0 if none was found. 468 */ 469 const char *compat = "arm,cortex-a9-gic"; 470 int offset; 471 472 offset = fdt_node_offset_by_compatible(fdt, -1, compat); 473 if (offset >= 0) { 474 return fdt_get_phandle(fdt, offset); 475 } 476 return 0; 477 } 478 479 static void vexpress_modify_dtb(const struct arm_boot_info *info, void *fdt) 480 { 481 uint32_t acells, scells, intc; 482 const VEDBoardInfo *daughterboard = (const VEDBoardInfo *)info; 483 484 acells = qemu_fdt_getprop_cell(fdt, "/", "#address-cells", 485 NULL, &error_fatal); 486 scells = qemu_fdt_getprop_cell(fdt, "/", "#size-cells", 487 NULL, &error_fatal); 488 intc = find_int_controller(fdt); 489 if (!intc) { 490 /* Not fatal, we just won't provide virtio. This will 491 * happen with older device tree blobs. 492 */ 493 warn_report("couldn't find interrupt controller in " 494 "dtb; will not include virtio-mmio devices in the dtb"); 495 } else { 496 int i; 497 const hwaddr *map = daughterboard->motherboard_map; 498 499 /* We iterate backwards here because adding nodes 500 * to the dtb puts them in last-first. 501 */ 502 for (i = NUM_VIRTIO_TRANSPORTS - 1; i >= 0; i--) { 503 add_virtio_mmio_node(fdt, acells, scells, 504 map[VE_VIRTIO] + 0x200 * i, 505 0x200, intc, 40 + i); 506 } 507 } 508 } 509 510 511 /* Open code a private version of pflash registration since we 512 * need to set non-default device width for VExpress platform. 513 */ 514 static PFlashCFI01 *ve_pflash_cfi01_register(hwaddr base, const char *name, 515 DriveInfo *di) 516 { 517 DeviceState *dev = qdev_new(TYPE_PFLASH_CFI01); 518 519 if (di) { 520 qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(di)); 521 } 522 523 qdev_prop_set_uint32(dev, "num-blocks", 524 VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE); 525 qdev_prop_set_uint64(dev, "sector-length", VEXPRESS_FLASH_SECT_SIZE); 526 qdev_prop_set_uint8(dev, "width", 4); 527 qdev_prop_set_uint8(dev, "device-width", 2); 528 qdev_prop_set_bit(dev, "big-endian", false); 529 qdev_prop_set_uint16(dev, "id0", 0x89); 530 qdev_prop_set_uint16(dev, "id1", 0x18); 531 qdev_prop_set_uint16(dev, "id2", 0x00); 532 qdev_prop_set_uint16(dev, "id3", 0x00); 533 qdev_prop_set_string(dev, "name", name); 534 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 535 536 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 537 return PFLASH_CFI01(dev); 538 } 539 540 static void vexpress_common_init(MachineState *machine) 541 { 542 VexpressMachineState *vms = VEXPRESS_MACHINE(machine); 543 VexpressMachineClass *vmc = VEXPRESS_MACHINE_GET_CLASS(machine); 544 VEDBoardInfo *daughterboard = vmc->daughterboard; 545 DeviceState *dev, *sysctl, *pl041; 546 qemu_irq pic[64]; 547 uint32_t sys_id; 548 DriveInfo *dinfo; 549 PFlashCFI01 *pflash0; 550 I2CBus *i2c; 551 ram_addr_t vram_size, sram_size; 552 MemoryRegion *sysmem = get_system_memory(); 553 const hwaddr *map = daughterboard->motherboard_map; 554 QList *db_voltage, *db_clock; 555 int i; 556 557 daughterboard->init(vms, machine->ram_size, machine->cpu_type, pic); 558 559 /* 560 * If a bios file was provided, attempt to map it into memory 561 */ 562 if (machine->firmware) { 563 char *fn; 564 int image_size; 565 566 if (drive_get(IF_PFLASH, 0, 0)) { 567 error_report("The contents of the first flash device may be " 568 "specified with -bios or with -drive if=pflash... " 569 "but you cannot use both options at once"); 570 exit(1); 571 } 572 fn = qemu_find_file(QEMU_FILE_TYPE_BIOS, machine->firmware); 573 if (!fn) { 574 error_report("Could not find ROM image '%s'", machine->firmware); 575 exit(1); 576 } 577 image_size = load_image_targphys(fn, map[VE_NORFLASH0], 578 VEXPRESS_FLASH_SIZE); 579 g_free(fn); 580 if (image_size < 0) { 581 error_report("Could not load ROM image '%s'", machine->firmware); 582 exit(1); 583 } 584 } 585 586 /* Motherboard peripherals: the wiring is the same but the 587 * addresses vary between the legacy and A-Series memory maps. 588 */ 589 590 sys_id = 0x1190f500; 591 592 sysctl = qdev_new("realview_sysctl"); 593 qdev_prop_set_uint32(sysctl, "sys_id", sys_id); 594 qdev_prop_set_uint32(sysctl, "proc_id", daughterboard->proc_id); 595 596 db_voltage = qlist_new(); 597 for (i = 0; i < daughterboard->num_voltage_sensors; i++) { 598 qlist_append_int(db_voltage, daughterboard->voltages[i]); 599 } 600 qdev_prop_set_array(sysctl, "db-voltage", db_voltage); 601 602 db_clock = qlist_new(); 603 for (i = 0; i < daughterboard->num_clocks; i++) { 604 qlist_append_int(db_clock, daughterboard->clocks[i]); 605 } 606 qdev_prop_set_array(sysctl, "db-clock", db_clock); 607 608 sysbus_realize_and_unref(SYS_BUS_DEVICE(sysctl), &error_fatal); 609 sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, map[VE_SYSREGS]); 610 611 /* VE_SP810: not modelled */ 612 /* VE_SERIALPCI: not modelled */ 613 614 pl041 = qdev_new("pl041"); 615 qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512); 616 if (machine->audiodev) { 617 qdev_prop_set_string(pl041, "audiodev", machine->audiodev); 618 } 619 sysbus_realize_and_unref(SYS_BUS_DEVICE(pl041), &error_fatal); 620 sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, map[VE_PL041]); 621 sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[11]); 622 623 dev = sysbus_create_varargs("pl181", map[VE_MMCI], pic[9], pic[10], NULL); 624 /* Wire up MMC card detect and read-only signals */ 625 qdev_connect_gpio_out_named(dev, "card-read-only", 0, 626 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT)); 627 qdev_connect_gpio_out_named(dev, "card-inserted", 0, 628 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN)); 629 dinfo = drive_get(IF_SD, 0, 0); 630 if (dinfo) { 631 DeviceState *card; 632 633 card = qdev_new(TYPE_SD_CARD); 634 qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), 635 &error_fatal); 636 qdev_realize_and_unref(card, qdev_get_child_bus(dev, "sd-bus"), 637 &error_fatal); 638 } 639 640 sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]); 641 sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]); 642 643 pl011_create(map[VE_UART0], pic[5], serial_hd(0)); 644 pl011_create(map[VE_UART1], pic[6], serial_hd(1)); 645 pl011_create(map[VE_UART2], pic[7], serial_hd(2)); 646 pl011_create(map[VE_UART3], pic[8], serial_hd(3)); 647 648 sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]); 649 sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]); 650 651 dev = sysbus_create_simple(TYPE_ARM_SBCON_I2C, map[VE_SERIALDVI], NULL); 652 i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); 653 i2c_slave_create_simple(i2c, "sii9022", 0x39); 654 655 sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */ 656 657 /* VE_COMPACTFLASH: not modelled */ 658 659 dev = qdev_new("pl111"); 660 object_property_set_link(OBJECT(dev), "framebuffer-memory", 661 OBJECT(sysmem), &error_fatal); 662 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 663 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, map[VE_CLCD]); 664 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[14]); 665 666 dinfo = drive_get(IF_PFLASH, 0, 0); 667 pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0", 668 dinfo); 669 670 if (map[VE_NORFLASHALIAS] != -1) { 671 /* Map flash 0 as an alias into low memory */ 672 MemoryRegion *flash0mem; 673 flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0); 674 memory_region_init_alias(&vms->flashalias, NULL, "vexpress.flashalias", 675 flash0mem, 0, VEXPRESS_FLASH_SIZE); 676 memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], &vms->flashalias); 677 } 678 679 dinfo = drive_get(IF_PFLASH, 0, 1); 680 ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", dinfo); 681 682 sram_size = 0x2000000; 683 memory_region_init_ram(&vms->sram, NULL, "vexpress.sram", sram_size, 684 &error_fatal); 685 memory_region_add_subregion(sysmem, map[VE_SRAM], &vms->sram); 686 687 vram_size = 0x800000; 688 memory_region_init_ram(&vms->vram, NULL, "vexpress.vram", vram_size, 689 &error_fatal); 690 memory_region_add_subregion(sysmem, map[VE_VIDEORAM], &vms->vram); 691 692 /* 0x4e000000 LAN9118 Ethernet */ 693 if (qemu_find_nic_info("lan9118", true, NULL)) { 694 lan9118_init(map[VE_ETHERNET], pic[15]); 695 } 696 697 /* VE_USB: not modelled */ 698 699 /* VE_DAPROM: not modelled */ 700 701 /* Create mmio transports, so the user can create virtio backends 702 * (which will be automatically plugged in to the transports). If 703 * no backend is created the transport will just sit harmlessly idle. 704 */ 705 for (i = 0; i < NUM_VIRTIO_TRANSPORTS; i++) { 706 sysbus_create_simple("virtio-mmio", map[VE_VIRTIO] + 0x200 * i, 707 pic[40 + i]); 708 } 709 710 daughterboard->bootinfo.ram_size = machine->ram_size; 711 daughterboard->bootinfo.board_id = VEXPRESS_BOARD_ID; 712 daughterboard->bootinfo.loader_start = daughterboard->loader_start; 713 daughterboard->bootinfo.smp_loader_start = map[VE_SRAM]; 714 daughterboard->bootinfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30; 715 daughterboard->bootinfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr; 716 daughterboard->bootinfo.modify_dtb = vexpress_modify_dtb; 717 /* When booting Linux we should be in secure state if the CPU has one. */ 718 daughterboard->bootinfo.secure_boot = vms->secure; 719 arm_load_kernel(ARM_CPU(first_cpu), machine, &daughterboard->bootinfo); 720 } 721 722 static bool vexpress_get_secure(Object *obj, Error **errp) 723 { 724 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 725 726 return vms->secure; 727 } 728 729 static void vexpress_set_secure(Object *obj, bool value, Error **errp) 730 { 731 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 732 733 vms->secure = value; 734 } 735 736 static bool vexpress_get_virt(Object *obj, Error **errp) 737 { 738 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 739 740 return vms->virt; 741 } 742 743 static void vexpress_set_virt(Object *obj, bool value, Error **errp) 744 { 745 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 746 747 vms->virt = value; 748 } 749 750 static void vexpress_instance_init(Object *obj) 751 { 752 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 753 754 /* EL3 is enabled by default on vexpress */ 755 vms->secure = true; 756 } 757 758 static void vexpress_a15_instance_init(Object *obj) 759 { 760 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 761 762 /* 763 * For the vexpress-a15, EL2 is by default enabled if EL3 is, 764 * but can also be specifically set to on or off. 765 */ 766 vms->virt = true; 767 } 768 769 static void vexpress_a9_instance_init(Object *obj) 770 { 771 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 772 773 /* The A9 doesn't have the virt extensions */ 774 vms->virt = false; 775 } 776 777 static void vexpress_class_init(ObjectClass *oc, void *data) 778 { 779 MachineClass *mc = MACHINE_CLASS(oc); 780 781 mc->desc = "ARM Versatile Express"; 782 mc->init = vexpress_common_init; 783 mc->max_cpus = 4; 784 mc->ignore_memory_transaction_failures = true; 785 mc->default_ram_id = "vexpress.highmem"; 786 787 machine_add_audiodev_property(mc); 788 object_class_property_add_bool(oc, "secure", vexpress_get_secure, 789 vexpress_set_secure); 790 object_class_property_set_description(oc, "secure", 791 "Set on/off to enable/disable the ARM " 792 "Security Extensions (TrustZone)"); 793 } 794 795 static void vexpress_a9_class_init(ObjectClass *oc, void *data) 796 { 797 static const char * const valid_cpu_types[] = { 798 ARM_CPU_TYPE_NAME("cortex-a9"), 799 NULL 800 }; 801 MachineClass *mc = MACHINE_CLASS(oc); 802 VexpressMachineClass *vmc = VEXPRESS_MACHINE_CLASS(oc); 803 804 mc->desc = "ARM Versatile Express for Cortex-A9"; 805 mc->valid_cpu_types = valid_cpu_types; 806 807 vmc->daughterboard = &a9_daughterboard; 808 } 809 810 static void vexpress_a15_class_init(ObjectClass *oc, void *data) 811 { 812 static const char * const valid_cpu_types[] = { 813 ARM_CPU_TYPE_NAME("cortex-a15"), 814 NULL 815 }; 816 MachineClass *mc = MACHINE_CLASS(oc); 817 VexpressMachineClass *vmc = VEXPRESS_MACHINE_CLASS(oc); 818 819 mc->desc = "ARM Versatile Express for Cortex-A15"; 820 mc->valid_cpu_types = valid_cpu_types; 821 822 vmc->daughterboard = &a15_daughterboard; 823 824 object_class_property_add_bool(oc, "virtualization", vexpress_get_virt, 825 vexpress_set_virt); 826 object_class_property_set_description(oc, "virtualization", 827 "Set on/off to enable/disable the ARM " 828 "Virtualization Extensions " 829 "(defaults to same as 'secure')"); 830 831 } 832 833 static const TypeInfo vexpress_info = { 834 .name = TYPE_VEXPRESS_MACHINE, 835 .parent = TYPE_MACHINE, 836 .abstract = true, 837 .instance_size = sizeof(VexpressMachineState), 838 .instance_init = vexpress_instance_init, 839 .class_size = sizeof(VexpressMachineClass), 840 .class_init = vexpress_class_init, 841 }; 842 843 static const TypeInfo vexpress_a9_info = { 844 .name = TYPE_VEXPRESS_A9_MACHINE, 845 .parent = TYPE_VEXPRESS_MACHINE, 846 .class_init = vexpress_a9_class_init, 847 .instance_init = vexpress_a9_instance_init, 848 }; 849 850 static const TypeInfo vexpress_a15_info = { 851 .name = TYPE_VEXPRESS_A15_MACHINE, 852 .parent = TYPE_VEXPRESS_MACHINE, 853 .class_init = vexpress_a15_class_init, 854 .instance_init = vexpress_a15_instance_init, 855 }; 856 857 static void vexpress_machine_init(void) 858 { 859 type_register_static(&vexpress_info); 860 type_register_static(&vexpress_a9_info); 861 type_register_static(&vexpress_a15_info); 862 } 863 864 type_init(vexpress_machine_init); 865