xref: /openbmc/qemu/hw/arm/tosa.c (revision f1020c2c)
1 /* vim:set shiftwidth=4 ts=4 et: */
2 /*
3  * PXA255 Sharp Zaurus SL-6000 PDA platform
4  *
5  * Copyright (c) 2008 Dmitry Baryshkov
6  *
7  * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
8  * This code is licensed under the GNU GPL v2.
9  *
10  * Contributions after 2012-01-13 are licensed under the terms of the
11  * GNU GPL, version 2 or (at your option) any later version.
12  */
13 
14 #include "qemu/osdep.h"
15 #include "qapi/error.h"
16 #include "hw/hw.h"
17 #include "hw/arm/pxa.h"
18 #include "hw/arm/arm.h"
19 #include "hw/devices.h"
20 #include "hw/arm/sharpsl.h"
21 #include "hw/pcmcia.h"
22 #include "hw/boards.h"
23 #include "hw/i2c/i2c.h"
24 #include "hw/ssi/ssi.h"
25 #include "sysemu/block-backend.h"
26 #include "hw/sysbus.h"
27 #include "exec/address-spaces.h"
28 
29 #define TOSA_RAM    0x04000000
30 #define TOSA_ROM	0x00800000
31 
32 #define TOSA_GPIO_USB_IN		(5)
33 #define TOSA_GPIO_nSD_DETECT	(9)
34 #define TOSA_GPIO_ON_RESET		(19)
35 #define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
36 #define TOSA_GPIO_CF_CD			(13)
37 #define TOSA_GPIO_TC6393XB_INT  (15)
38 #define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
39 
40 #define TOSA_SCOOP_GPIO_BASE	1
41 #define TOSA_GPIO_IR_POWERDWN	(TOSA_SCOOP_GPIO_BASE + 2)
42 #define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
43 #define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
44 
45 #define TOSA_SCOOP_JC_GPIO_BASE		1
46 #define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
47 #define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
48 #define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
49 #define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
50 #define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
51 
52 #define	DAC_BASE	0x4e
53 #define DAC_CH1		0
54 #define DAC_CH2		1
55 
56 static void tosa_microdrive_attach(PXA2xxState *cpu)
57 {
58     PCMCIACardState *md;
59     DriveInfo *dinfo;
60 
61     dinfo = drive_get(IF_IDE, 0, 0);
62     if (!dinfo || dinfo->media_cd)
63         return;
64     md = dscm1xxxx_init(dinfo);
65     pxa2xx_pcmcia_attach(cpu->pcmcia[0], md);
66 }
67 
68 static void tosa_out_switch(void *opaque, int line, int level)
69 {
70     switch (line) {
71         case 0:
72             fprintf(stderr, "blue LED %s.\n", level ? "on" : "off");
73             break;
74         case 1:
75             fprintf(stderr, "green LED %s.\n", level ? "on" : "off");
76             break;
77         case 2:
78             fprintf(stderr, "amber LED %s.\n", level ? "on" : "off");
79             break;
80         case 3:
81             fprintf(stderr, "wlan LED %s.\n", level ? "on" : "off");
82             break;
83         default:
84             fprintf(stderr, "Uhandled out event: %d = %d\n", line, level);
85             break;
86     }
87 }
88 
89 
90 static void tosa_gpio_setup(PXA2xxState *cpu,
91                 DeviceState *scp0,
92                 DeviceState *scp1,
93                 TC6393xbState *tmio)
94 {
95     qemu_irq *outsignals = qemu_allocate_irqs(tosa_out_switch, cpu, 4);
96     /* MMC/SD host */
97     pxa2xx_mmci_handlers(cpu->mmc,
98                     qdev_get_gpio_in(scp0, TOSA_GPIO_SD_WP),
99                     qemu_irq_invert(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_nSD_DETECT)));
100 
101     /* Handle reset */
102     qdev_connect_gpio_out(cpu->gpio, TOSA_GPIO_ON_RESET, cpu->reset);
103 
104     /* PCMCIA signals: card's IRQ and Card-Detect */
105     pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
106                         qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_IRQ),
107                         qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_CD));
108 
109     pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
110                         qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_JC_CF_IRQ),
111                         NULL);
112 
113     qdev_connect_gpio_out(scp1, TOSA_GPIO_BT_LED, outsignals[0]);
114     qdev_connect_gpio_out(scp1, TOSA_GPIO_NOTE_LED, outsignals[1]);
115     qdev_connect_gpio_out(scp1, TOSA_GPIO_CHRG_ERR_LED, outsignals[2]);
116     qdev_connect_gpio_out(scp1, TOSA_GPIO_WLAN_LED, outsignals[3]);
117 
118     qdev_connect_gpio_out(scp1, TOSA_GPIO_TC6393XB_L3V_ON, tc6393xb_l3v_get(tmio));
119 
120     /* UDC Vbus */
121     qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_USB_IN));
122 }
123 
124 static uint32_t tosa_ssp_tansfer(SSISlave *dev, uint32_t value)
125 {
126     fprintf(stderr, "TG: %d %02x\n", value >> 5, value & 0x1f);
127     return 0;
128 }
129 
130 static int tosa_ssp_init(SSISlave *dev)
131 {
132     /* Nothing to do.  */
133     return 0;
134 }
135 
136 #define TYPE_TOSA_DAC "tosa_dac"
137 #define TOSA_DAC(obj) OBJECT_CHECK(TosaDACState, (obj), TYPE_TOSA_DAC)
138 
139 typedef struct {
140     I2CSlave parent_obj;
141 
142     int len;
143     char buf[3];
144 } TosaDACState;
145 
146 static int tosa_dac_send(I2CSlave *i2c, uint8_t data)
147 {
148     TosaDACState *s = TOSA_DAC(i2c);
149 
150     s->buf[s->len] = data;
151     if (s->len ++ > 2) {
152 #ifdef VERBOSE
153         fprintf(stderr, "%s: message too long (%i bytes)\n", __FUNCTION__, s->len);
154 #endif
155         return 1;
156     }
157 
158     if (s->len == 2) {
159         fprintf(stderr, "dac: channel %d value 0x%02x\n",
160                 s->buf[0], s->buf[1]);
161     }
162 
163     return 0;
164 }
165 
166 static void tosa_dac_event(I2CSlave *i2c, enum i2c_event event)
167 {
168     TosaDACState *s = TOSA_DAC(i2c);
169 
170     s->len = 0;
171     switch (event) {
172     case I2C_START_SEND:
173         break;
174     case I2C_START_RECV:
175         printf("%s: recv not supported!!!\n", __FUNCTION__);
176         break;
177     case I2C_FINISH:
178 #ifdef VERBOSE
179         if (s->len < 2)
180             printf("%s: message too short (%i bytes)\n", __FUNCTION__, s->len);
181         if (s->len > 2)
182             printf("%s: message too long\n", __FUNCTION__);
183 #endif
184         break;
185     default:
186         break;
187     }
188 }
189 
190 static int tosa_dac_recv(I2CSlave *s)
191 {
192     printf("%s: recv not supported!!!\n", __FUNCTION__);
193     return -1;
194 }
195 
196 static int tosa_dac_init(I2CSlave *i2c)
197 {
198     /* Nothing to do.  */
199     return 0;
200 }
201 
202 static void tosa_tg_init(PXA2xxState *cpu)
203 {
204     I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
205     i2c_create_slave(bus, TYPE_TOSA_DAC, DAC_BASE);
206     ssi_create_slave(cpu->ssp[1], "tosa-ssp");
207 }
208 
209 
210 static struct arm_boot_info tosa_binfo = {
211     .loader_start = PXA2XX_SDRAM_BASE,
212     .ram_size = 0x04000000,
213 };
214 
215 static void tosa_init(MachineState *machine)
216 {
217     const char *cpu_model = machine->cpu_model;
218     const char *kernel_filename = machine->kernel_filename;
219     const char *kernel_cmdline = machine->kernel_cmdline;
220     const char *initrd_filename = machine->initrd_filename;
221     MemoryRegion *address_space_mem = get_system_memory();
222     MemoryRegion *rom = g_new(MemoryRegion, 1);
223     PXA2xxState *mpu;
224     TC6393xbState *tmio;
225     DeviceState *scp0, *scp1;
226 
227     if (!cpu_model)
228         cpu_model = "pxa255";
229 
230     mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size);
231 
232     memory_region_init_ram(rom, NULL, "tosa.rom", TOSA_ROM, &error_fatal);
233     vmstate_register_ram_global(rom);
234     memory_region_set_readonly(rom, true);
235     memory_region_add_subregion(address_space_mem, 0, rom);
236 
237     tmio = tc6393xb_init(address_space_mem, 0x10000000,
238             qdev_get_gpio_in(mpu->gpio, TOSA_GPIO_TC6393XB_INT));
239 
240     scp0 = sysbus_create_simple("scoop", 0x08800000, NULL);
241     scp1 = sysbus_create_simple("scoop", 0x14800040, NULL);
242 
243     tosa_gpio_setup(mpu, scp0, scp1, tmio);
244 
245     tosa_microdrive_attach(mpu);
246 
247     tosa_tg_init(mpu);
248 
249     tosa_binfo.kernel_filename = kernel_filename;
250     tosa_binfo.kernel_cmdline = kernel_cmdline;
251     tosa_binfo.initrd_filename = initrd_filename;
252     tosa_binfo.board_id = 0x208;
253     arm_load_kernel(mpu->cpu, &tosa_binfo);
254     sl_bootparam_write(SL_PXA_PARAM_BASE);
255 }
256 
257 static void tosapda_machine_init(MachineClass *mc)
258 {
259     mc->desc = "Sharp SL-6000 (Tosa) PDA (PXA255)";
260     mc->init = tosa_init;
261 }
262 
263 DEFINE_MACHINE("tosa", tosapda_machine_init)
264 
265 static void tosa_dac_class_init(ObjectClass *klass, void *data)
266 {
267     I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
268 
269     k->init = tosa_dac_init;
270     k->event = tosa_dac_event;
271     k->recv = tosa_dac_recv;
272     k->send = tosa_dac_send;
273 }
274 
275 static const TypeInfo tosa_dac_info = {
276     .name          = TYPE_TOSA_DAC,
277     .parent        = TYPE_I2C_SLAVE,
278     .instance_size = sizeof(TosaDACState),
279     .class_init    = tosa_dac_class_init,
280 };
281 
282 static void tosa_ssp_class_init(ObjectClass *klass, void *data)
283 {
284     SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
285 
286     k->init = tosa_ssp_init;
287     k->transfer = tosa_ssp_tansfer;
288 }
289 
290 static const TypeInfo tosa_ssp_info = {
291     .name          = "tosa-ssp",
292     .parent        = TYPE_SSI_SLAVE,
293     .instance_size = sizeof(SSISlave),
294     .class_init    = tosa_ssp_class_init,
295 };
296 
297 static void tosa_register_types(void)
298 {
299     type_register_static(&tosa_dac_info);
300     type_register_static(&tosa_ssp_info);
301 }
302 
303 type_init(tosa_register_types)
304