xref: /openbmc/qemu/hw/arm/tosa.c (revision 91bfcdb0)
1 /* vim:set shiftwidth=4 ts=4 et: */
2 /*
3  * PXA255 Sharp Zaurus SL-6000 PDA platform
4  *
5  * Copyright (c) 2008 Dmitry Baryshkov
6  *
7  * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
8  * This code is licensed under the GNU GPL v2.
9  *
10  * Contributions after 2012-01-13 are licensed under the terms of the
11  * GNU GPL, version 2 or (at your option) any later version.
12  */
13 
14 #include "hw/hw.h"
15 #include "hw/arm/pxa.h"
16 #include "hw/arm/arm.h"
17 #include "hw/devices.h"
18 #include "hw/arm/sharpsl.h"
19 #include "hw/pcmcia.h"
20 #include "hw/boards.h"
21 #include "hw/i2c/i2c.h"
22 #include "hw/ssi.h"
23 #include "sysemu/block-backend.h"
24 #include "hw/sysbus.h"
25 #include "exec/address-spaces.h"
26 
27 #define TOSA_RAM    0x04000000
28 #define TOSA_ROM	0x00800000
29 
30 #define TOSA_GPIO_USB_IN		(5)
31 #define TOSA_GPIO_nSD_DETECT	(9)
32 #define TOSA_GPIO_ON_RESET		(19)
33 #define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
34 #define TOSA_GPIO_CF_CD			(13)
35 #define TOSA_GPIO_TC6393XB_INT  (15)
36 #define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
37 
38 #define TOSA_SCOOP_GPIO_BASE	1
39 #define TOSA_GPIO_IR_POWERDWN	(TOSA_SCOOP_GPIO_BASE + 2)
40 #define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
41 #define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
42 
43 #define TOSA_SCOOP_JC_GPIO_BASE		1
44 #define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
45 #define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
46 #define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
47 #define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
48 #define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
49 
50 #define	DAC_BASE	0x4e
51 #define DAC_CH1		0
52 #define DAC_CH2		1
53 
54 static void tosa_microdrive_attach(PXA2xxState *cpu)
55 {
56     PCMCIACardState *md;
57     DriveInfo *dinfo;
58 
59     dinfo = drive_get(IF_IDE, 0, 0);
60     if (!dinfo || dinfo->media_cd)
61         return;
62     md = dscm1xxxx_init(dinfo);
63     pxa2xx_pcmcia_attach(cpu->pcmcia[0], md);
64 }
65 
66 static void tosa_out_switch(void *opaque, int line, int level)
67 {
68     switch (line) {
69         case 0:
70             fprintf(stderr, "blue LED %s.\n", level ? "on" : "off");
71             break;
72         case 1:
73             fprintf(stderr, "green LED %s.\n", level ? "on" : "off");
74             break;
75         case 2:
76             fprintf(stderr, "amber LED %s.\n", level ? "on" : "off");
77             break;
78         case 3:
79             fprintf(stderr, "wlan LED %s.\n", level ? "on" : "off");
80             break;
81         default:
82             fprintf(stderr, "Uhandled out event: %d = %d\n", line, level);
83             break;
84     }
85 }
86 
87 
88 static void tosa_gpio_setup(PXA2xxState *cpu,
89                 DeviceState *scp0,
90                 DeviceState *scp1,
91                 TC6393xbState *tmio)
92 {
93     qemu_irq *outsignals = qemu_allocate_irqs(tosa_out_switch, cpu, 4);
94     /* MMC/SD host */
95     pxa2xx_mmci_handlers(cpu->mmc,
96                     qdev_get_gpio_in(scp0, TOSA_GPIO_SD_WP),
97                     qemu_irq_invert(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_nSD_DETECT)));
98 
99     /* Handle reset */
100     qdev_connect_gpio_out(cpu->gpio, TOSA_GPIO_ON_RESET, cpu->reset);
101 
102     /* PCMCIA signals: card's IRQ and Card-Detect */
103     pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
104                         qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_IRQ),
105                         qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_CD));
106 
107     pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
108                         qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_JC_CF_IRQ),
109                         NULL);
110 
111     qdev_connect_gpio_out(scp1, TOSA_GPIO_BT_LED, outsignals[0]);
112     qdev_connect_gpio_out(scp1, TOSA_GPIO_NOTE_LED, outsignals[1]);
113     qdev_connect_gpio_out(scp1, TOSA_GPIO_CHRG_ERR_LED, outsignals[2]);
114     qdev_connect_gpio_out(scp1, TOSA_GPIO_WLAN_LED, outsignals[3]);
115 
116     qdev_connect_gpio_out(scp1, TOSA_GPIO_TC6393XB_L3V_ON, tc6393xb_l3v_get(tmio));
117 
118     /* UDC Vbus */
119     qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_USB_IN));
120 }
121 
122 static uint32_t tosa_ssp_tansfer(SSISlave *dev, uint32_t value)
123 {
124     fprintf(stderr, "TG: %d %02x\n", value >> 5, value & 0x1f);
125     return 0;
126 }
127 
128 static int tosa_ssp_init(SSISlave *dev)
129 {
130     /* Nothing to do.  */
131     return 0;
132 }
133 
134 #define TYPE_TOSA_DAC "tosa_dac"
135 #define TOSA_DAC(obj) OBJECT_CHECK(TosaDACState, (obj), TYPE_TOSA_DAC)
136 
137 typedef struct {
138     I2CSlave parent_obj;
139 
140     int len;
141     char buf[3];
142 } TosaDACState;
143 
144 static int tosa_dac_send(I2CSlave *i2c, uint8_t data)
145 {
146     TosaDACState *s = TOSA_DAC(i2c);
147 
148     s->buf[s->len] = data;
149     if (s->len ++ > 2) {
150 #ifdef VERBOSE
151         fprintf(stderr, "%s: message too long (%i bytes)\n", __FUNCTION__, s->len);
152 #endif
153         return 1;
154     }
155 
156     if (s->len == 2) {
157         fprintf(stderr, "dac: channel %d value 0x%02x\n",
158                 s->buf[0], s->buf[1]);
159     }
160 
161     return 0;
162 }
163 
164 static void tosa_dac_event(I2CSlave *i2c, enum i2c_event event)
165 {
166     TosaDACState *s = TOSA_DAC(i2c);
167 
168     s->len = 0;
169     switch (event) {
170     case I2C_START_SEND:
171         break;
172     case I2C_START_RECV:
173         printf("%s: recv not supported!!!\n", __FUNCTION__);
174         break;
175     case I2C_FINISH:
176 #ifdef VERBOSE
177         if (s->len < 2)
178             printf("%s: message too short (%i bytes)\n", __FUNCTION__, s->len);
179         if (s->len > 2)
180             printf("%s: message too long\n", __FUNCTION__);
181 #endif
182         break;
183     default:
184         break;
185     }
186 }
187 
188 static int tosa_dac_recv(I2CSlave *s)
189 {
190     printf("%s: recv not supported!!!\n", __FUNCTION__);
191     return -1;
192 }
193 
194 static int tosa_dac_init(I2CSlave *i2c)
195 {
196     /* Nothing to do.  */
197     return 0;
198 }
199 
200 static void tosa_tg_init(PXA2xxState *cpu)
201 {
202     I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
203     i2c_create_slave(bus, TYPE_TOSA_DAC, DAC_BASE);
204     ssi_create_slave(cpu->ssp[1], "tosa-ssp");
205 }
206 
207 
208 static struct arm_boot_info tosa_binfo = {
209     .loader_start = PXA2XX_SDRAM_BASE,
210     .ram_size = 0x04000000,
211 };
212 
213 static void tosa_init(MachineState *machine)
214 {
215     const char *cpu_model = machine->cpu_model;
216     const char *kernel_filename = machine->kernel_filename;
217     const char *kernel_cmdline = machine->kernel_cmdline;
218     const char *initrd_filename = machine->initrd_filename;
219     MemoryRegion *address_space_mem = get_system_memory();
220     MemoryRegion *rom = g_new(MemoryRegion, 1);
221     PXA2xxState *mpu;
222     TC6393xbState *tmio;
223     DeviceState *scp0, *scp1;
224 
225     if (!cpu_model)
226         cpu_model = "pxa255";
227 
228     mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size);
229 
230     memory_region_init_ram(rom, NULL, "tosa.rom", TOSA_ROM, &error_fatal);
231     vmstate_register_ram_global(rom);
232     memory_region_set_readonly(rom, true);
233     memory_region_add_subregion(address_space_mem, 0, rom);
234 
235     tmio = tc6393xb_init(address_space_mem, 0x10000000,
236             qdev_get_gpio_in(mpu->gpio, TOSA_GPIO_TC6393XB_INT));
237 
238     scp0 = sysbus_create_simple("scoop", 0x08800000, NULL);
239     scp1 = sysbus_create_simple("scoop", 0x14800040, NULL);
240 
241     tosa_gpio_setup(mpu, scp0, scp1, tmio);
242 
243     tosa_microdrive_attach(mpu);
244 
245     tosa_tg_init(mpu);
246 
247     tosa_binfo.kernel_filename = kernel_filename;
248     tosa_binfo.kernel_cmdline = kernel_cmdline;
249     tosa_binfo.initrd_filename = initrd_filename;
250     tosa_binfo.board_id = 0x208;
251     arm_load_kernel(mpu->cpu, &tosa_binfo);
252     sl_bootparam_write(SL_PXA_PARAM_BASE);
253 }
254 
255 static void tosapda_machine_init(MachineClass *mc)
256 {
257     mc->desc = "Sharp SL-6000 (Tosa) PDA (PXA255)";
258     mc->init = tosa_init;
259 }
260 
261 DEFINE_MACHINE("tosa", tosapda_machine_init)
262 
263 static void tosa_dac_class_init(ObjectClass *klass, void *data)
264 {
265     I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
266 
267     k->init = tosa_dac_init;
268     k->event = tosa_dac_event;
269     k->recv = tosa_dac_recv;
270     k->send = tosa_dac_send;
271 }
272 
273 static const TypeInfo tosa_dac_info = {
274     .name          = TYPE_TOSA_DAC,
275     .parent        = TYPE_I2C_SLAVE,
276     .instance_size = sizeof(TosaDACState),
277     .class_init    = tosa_dac_class_init,
278 };
279 
280 static void tosa_ssp_class_init(ObjectClass *klass, void *data)
281 {
282     SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
283 
284     k->init = tosa_ssp_init;
285     k->transfer = tosa_ssp_tansfer;
286 }
287 
288 static const TypeInfo tosa_ssp_info = {
289     .name          = "tosa-ssp",
290     .parent        = TYPE_SSI_SLAVE,
291     .instance_size = sizeof(SSISlave),
292     .class_init    = tosa_ssp_class_init,
293 };
294 
295 static void tosa_register_types(void)
296 {
297     type_register_static(&tosa_dac_info);
298     type_register_static(&tosa_ssp_info);
299 }
300 
301 type_init(tosa_register_types)
302