xref: /openbmc/qemu/hw/arm/tosa.c (revision 90ce6e26)
1 /* vim:set shiftwidth=4 ts=4 et: */
2 /*
3  * PXA255 Sharp Zaurus SL-6000 PDA platform
4  *
5  * Copyright (c) 2008 Dmitry Baryshkov
6  *
7  * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
8  * This code is licensed under the GNU GPL v2.
9  *
10  * Contributions after 2012-01-13 are licensed under the terms of the
11  * GNU GPL, version 2 or (at your option) any later version.
12  */
13 
14 #include "qemu/osdep.h"
15 #include "hw/hw.h"
16 #include "hw/arm/pxa.h"
17 #include "hw/arm/arm.h"
18 #include "hw/devices.h"
19 #include "hw/arm/sharpsl.h"
20 #include "hw/pcmcia.h"
21 #include "hw/boards.h"
22 #include "hw/i2c/i2c.h"
23 #include "hw/ssi/ssi.h"
24 #include "sysemu/block-backend.h"
25 #include "hw/sysbus.h"
26 #include "exec/address-spaces.h"
27 
28 #define TOSA_RAM    0x04000000
29 #define TOSA_ROM	0x00800000
30 
31 #define TOSA_GPIO_USB_IN		(5)
32 #define TOSA_GPIO_nSD_DETECT	(9)
33 #define TOSA_GPIO_ON_RESET		(19)
34 #define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
35 #define TOSA_GPIO_CF_CD			(13)
36 #define TOSA_GPIO_TC6393XB_INT  (15)
37 #define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
38 
39 #define TOSA_SCOOP_GPIO_BASE	1
40 #define TOSA_GPIO_IR_POWERDWN	(TOSA_SCOOP_GPIO_BASE + 2)
41 #define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
42 #define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
43 
44 #define TOSA_SCOOP_JC_GPIO_BASE		1
45 #define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
46 #define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
47 #define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
48 #define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
49 #define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
50 
51 #define	DAC_BASE	0x4e
52 #define DAC_CH1		0
53 #define DAC_CH2		1
54 
55 static void tosa_microdrive_attach(PXA2xxState *cpu)
56 {
57     PCMCIACardState *md;
58     DriveInfo *dinfo;
59 
60     dinfo = drive_get(IF_IDE, 0, 0);
61     if (!dinfo || dinfo->media_cd)
62         return;
63     md = dscm1xxxx_init(dinfo);
64     pxa2xx_pcmcia_attach(cpu->pcmcia[0], md);
65 }
66 
67 static void tosa_out_switch(void *opaque, int line, int level)
68 {
69     switch (line) {
70         case 0:
71             fprintf(stderr, "blue LED %s.\n", level ? "on" : "off");
72             break;
73         case 1:
74             fprintf(stderr, "green LED %s.\n", level ? "on" : "off");
75             break;
76         case 2:
77             fprintf(stderr, "amber LED %s.\n", level ? "on" : "off");
78             break;
79         case 3:
80             fprintf(stderr, "wlan LED %s.\n", level ? "on" : "off");
81             break;
82         default:
83             fprintf(stderr, "Uhandled out event: %d = %d\n", line, level);
84             break;
85     }
86 }
87 
88 
89 static void tosa_gpio_setup(PXA2xxState *cpu,
90                 DeviceState *scp0,
91                 DeviceState *scp1,
92                 TC6393xbState *tmio)
93 {
94     qemu_irq *outsignals = qemu_allocate_irqs(tosa_out_switch, cpu, 4);
95     /* MMC/SD host */
96     pxa2xx_mmci_handlers(cpu->mmc,
97                     qdev_get_gpio_in(scp0, TOSA_GPIO_SD_WP),
98                     qemu_irq_invert(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_nSD_DETECT)));
99 
100     /* Handle reset */
101     qdev_connect_gpio_out(cpu->gpio, TOSA_GPIO_ON_RESET, cpu->reset);
102 
103     /* PCMCIA signals: card's IRQ and Card-Detect */
104     pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
105                         qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_IRQ),
106                         qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_CD));
107 
108     pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
109                         qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_JC_CF_IRQ),
110                         NULL);
111 
112     qdev_connect_gpio_out(scp1, TOSA_GPIO_BT_LED, outsignals[0]);
113     qdev_connect_gpio_out(scp1, TOSA_GPIO_NOTE_LED, outsignals[1]);
114     qdev_connect_gpio_out(scp1, TOSA_GPIO_CHRG_ERR_LED, outsignals[2]);
115     qdev_connect_gpio_out(scp1, TOSA_GPIO_WLAN_LED, outsignals[3]);
116 
117     qdev_connect_gpio_out(scp1, TOSA_GPIO_TC6393XB_L3V_ON, tc6393xb_l3v_get(tmio));
118 
119     /* UDC Vbus */
120     qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_USB_IN));
121 }
122 
123 static uint32_t tosa_ssp_tansfer(SSISlave *dev, uint32_t value)
124 {
125     fprintf(stderr, "TG: %d %02x\n", value >> 5, value & 0x1f);
126     return 0;
127 }
128 
129 static int tosa_ssp_init(SSISlave *dev)
130 {
131     /* Nothing to do.  */
132     return 0;
133 }
134 
135 #define TYPE_TOSA_DAC "tosa_dac"
136 #define TOSA_DAC(obj) OBJECT_CHECK(TosaDACState, (obj), TYPE_TOSA_DAC)
137 
138 typedef struct {
139     I2CSlave parent_obj;
140 
141     int len;
142     char buf[3];
143 } TosaDACState;
144 
145 static int tosa_dac_send(I2CSlave *i2c, uint8_t data)
146 {
147     TosaDACState *s = TOSA_DAC(i2c);
148 
149     s->buf[s->len] = data;
150     if (s->len ++ > 2) {
151 #ifdef VERBOSE
152         fprintf(stderr, "%s: message too long (%i bytes)\n", __FUNCTION__, s->len);
153 #endif
154         return 1;
155     }
156 
157     if (s->len == 2) {
158         fprintf(stderr, "dac: channel %d value 0x%02x\n",
159                 s->buf[0], s->buf[1]);
160     }
161 
162     return 0;
163 }
164 
165 static void tosa_dac_event(I2CSlave *i2c, enum i2c_event event)
166 {
167     TosaDACState *s = TOSA_DAC(i2c);
168 
169     s->len = 0;
170     switch (event) {
171     case I2C_START_SEND:
172         break;
173     case I2C_START_RECV:
174         printf("%s: recv not supported!!!\n", __FUNCTION__);
175         break;
176     case I2C_FINISH:
177 #ifdef VERBOSE
178         if (s->len < 2)
179             printf("%s: message too short (%i bytes)\n", __FUNCTION__, s->len);
180         if (s->len > 2)
181             printf("%s: message too long\n", __FUNCTION__);
182 #endif
183         break;
184     default:
185         break;
186     }
187 }
188 
189 static int tosa_dac_recv(I2CSlave *s)
190 {
191     printf("%s: recv not supported!!!\n", __FUNCTION__);
192     return -1;
193 }
194 
195 static int tosa_dac_init(I2CSlave *i2c)
196 {
197     /* Nothing to do.  */
198     return 0;
199 }
200 
201 static void tosa_tg_init(PXA2xxState *cpu)
202 {
203     I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
204     i2c_create_slave(bus, TYPE_TOSA_DAC, DAC_BASE);
205     ssi_create_slave(cpu->ssp[1], "tosa-ssp");
206 }
207 
208 
209 static struct arm_boot_info tosa_binfo = {
210     .loader_start = PXA2XX_SDRAM_BASE,
211     .ram_size = 0x04000000,
212 };
213 
214 static void tosa_init(MachineState *machine)
215 {
216     const char *cpu_model = machine->cpu_model;
217     const char *kernel_filename = machine->kernel_filename;
218     const char *kernel_cmdline = machine->kernel_cmdline;
219     const char *initrd_filename = machine->initrd_filename;
220     MemoryRegion *address_space_mem = get_system_memory();
221     MemoryRegion *rom = g_new(MemoryRegion, 1);
222     PXA2xxState *mpu;
223     TC6393xbState *tmio;
224     DeviceState *scp0, *scp1;
225 
226     if (!cpu_model)
227         cpu_model = "pxa255";
228 
229     mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size);
230 
231     memory_region_init_ram(rom, NULL, "tosa.rom", TOSA_ROM, &error_fatal);
232     vmstate_register_ram_global(rom);
233     memory_region_set_readonly(rom, true);
234     memory_region_add_subregion(address_space_mem, 0, rom);
235 
236     tmio = tc6393xb_init(address_space_mem, 0x10000000,
237             qdev_get_gpio_in(mpu->gpio, TOSA_GPIO_TC6393XB_INT));
238 
239     scp0 = sysbus_create_simple("scoop", 0x08800000, NULL);
240     scp1 = sysbus_create_simple("scoop", 0x14800040, NULL);
241 
242     tosa_gpio_setup(mpu, scp0, scp1, tmio);
243 
244     tosa_microdrive_attach(mpu);
245 
246     tosa_tg_init(mpu);
247 
248     tosa_binfo.kernel_filename = kernel_filename;
249     tosa_binfo.kernel_cmdline = kernel_cmdline;
250     tosa_binfo.initrd_filename = initrd_filename;
251     tosa_binfo.board_id = 0x208;
252     arm_load_kernel(mpu->cpu, &tosa_binfo);
253     sl_bootparam_write(SL_PXA_PARAM_BASE);
254 }
255 
256 static void tosapda_machine_init(MachineClass *mc)
257 {
258     mc->desc = "Sharp SL-6000 (Tosa) PDA (PXA255)";
259     mc->init = tosa_init;
260 }
261 
262 DEFINE_MACHINE("tosa", tosapda_machine_init)
263 
264 static void tosa_dac_class_init(ObjectClass *klass, void *data)
265 {
266     I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
267 
268     k->init = tosa_dac_init;
269     k->event = tosa_dac_event;
270     k->recv = tosa_dac_recv;
271     k->send = tosa_dac_send;
272 }
273 
274 static const TypeInfo tosa_dac_info = {
275     .name          = TYPE_TOSA_DAC,
276     .parent        = TYPE_I2C_SLAVE,
277     .instance_size = sizeof(TosaDACState),
278     .class_init    = tosa_dac_class_init,
279 };
280 
281 static void tosa_ssp_class_init(ObjectClass *klass, void *data)
282 {
283     SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
284 
285     k->init = tosa_ssp_init;
286     k->transfer = tosa_ssp_tansfer;
287 }
288 
289 static const TypeInfo tosa_ssp_info = {
290     .name          = "tosa-ssp",
291     .parent        = TYPE_SSI_SLAVE,
292     .instance_size = sizeof(SSISlave),
293     .class_init    = tosa_ssp_class_init,
294 };
295 
296 static void tosa_register_types(void)
297 {
298     type_register_static(&tosa_dac_info);
299     type_register_static(&tosa_ssp_info);
300 }
301 
302 type_init(tosa_register_types)
303