1 /* 2 * StrongARM SA-1100/SA-1110 emulation 3 * 4 * Copyright (C) 2011 Dmitry Eremin-Solenikov 5 * 6 * Largely based on StrongARM emulation: 7 * Copyright (c) 2006 Openedhand Ltd. 8 * Written by Andrzej Zaborowski <balrog@zabor.org> 9 * 10 * UART code based on QEMU 16550A UART emulation 11 * Copyright (c) 2003-2004 Fabrice Bellard 12 * Copyright (c) 2008 Citrix Systems, Inc. 13 * 14 * This program is free software; you can redistribute it and/or modify 15 * it under the terms of the GNU General Public License version 2 as 16 * published by the Free Software Foundation. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License along 24 * with this program; if not, see <http://www.gnu.org/licenses/>. 25 * 26 * Contributions after 2012-01-13 are licensed under the terms of the 27 * GNU GPL, version 2 or (at your option) any later version. 28 */ 29 30 #include "qemu/osdep.h" 31 #include "cpu.h" 32 #include "hw/boards.h" 33 #include "hw/sysbus.h" 34 #include "strongarm.h" 35 #include "qemu/error-report.h" 36 #include "hw/arm/arm.h" 37 #include "chardev/char-fe.h" 38 #include "chardev/char-serial.h" 39 #include "sysemu/sysemu.h" 40 #include "hw/ssi/ssi.h" 41 #include "qemu/cutils.h" 42 #include "qemu/log.h" 43 44 //#define DEBUG 45 46 /* 47 TODO 48 - Implement cp15, c14 ? 49 - Implement cp15, c15 !!! (idle used in L) 50 - Implement idle mode handling/DIM 51 - Implement sleep mode/Wake sources 52 - Implement reset control 53 - Implement memory control regs 54 - PCMCIA handling 55 - Maybe support MBGNT/MBREQ 56 - DMA channels 57 - GPCLK 58 - IrDA 59 - MCP 60 - Enhance UART with modem signals 61 */ 62 63 #ifdef DEBUG 64 # define DPRINTF(format, ...) printf(format , ## __VA_ARGS__) 65 #else 66 # define DPRINTF(format, ...) do { } while (0) 67 #endif 68 69 static struct { 70 hwaddr io_base; 71 int irq; 72 } sa_serial[] = { 73 { 0x80010000, SA_PIC_UART1 }, 74 { 0x80030000, SA_PIC_UART2 }, 75 { 0x80050000, SA_PIC_UART3 }, 76 { 0, 0 } 77 }; 78 79 /* Interrupt Controller */ 80 81 #define TYPE_STRONGARM_PIC "strongarm_pic" 82 #define STRONGARM_PIC(obj) \ 83 OBJECT_CHECK(StrongARMPICState, (obj), TYPE_STRONGARM_PIC) 84 85 typedef struct StrongARMPICState { 86 SysBusDevice parent_obj; 87 88 MemoryRegion iomem; 89 qemu_irq irq; 90 qemu_irq fiq; 91 92 uint32_t pending; 93 uint32_t enabled; 94 uint32_t is_fiq; 95 uint32_t int_idle; 96 } StrongARMPICState; 97 98 #define ICIP 0x00 99 #define ICMR 0x04 100 #define ICLR 0x08 101 #define ICFP 0x10 102 #define ICPR 0x20 103 #define ICCR 0x0c 104 105 #define SA_PIC_SRCS 32 106 107 108 static void strongarm_pic_update(void *opaque) 109 { 110 StrongARMPICState *s = opaque; 111 112 /* FIXME: reflect DIM */ 113 qemu_set_irq(s->fiq, s->pending & s->enabled & s->is_fiq); 114 qemu_set_irq(s->irq, s->pending & s->enabled & ~s->is_fiq); 115 } 116 117 static void strongarm_pic_set_irq(void *opaque, int irq, int level) 118 { 119 StrongARMPICState *s = opaque; 120 121 if (level) { 122 s->pending |= 1 << irq; 123 } else { 124 s->pending &= ~(1 << irq); 125 } 126 127 strongarm_pic_update(s); 128 } 129 130 static uint64_t strongarm_pic_mem_read(void *opaque, hwaddr offset, 131 unsigned size) 132 { 133 StrongARMPICState *s = opaque; 134 135 switch (offset) { 136 case ICIP: 137 return s->pending & ~s->is_fiq & s->enabled; 138 case ICMR: 139 return s->enabled; 140 case ICLR: 141 return s->is_fiq; 142 case ICCR: 143 return s->int_idle == 0; 144 case ICFP: 145 return s->pending & s->is_fiq & s->enabled; 146 case ICPR: 147 return s->pending; 148 default: 149 printf("%s: Bad register offset 0x" TARGET_FMT_plx "\n", 150 __func__, offset); 151 return 0; 152 } 153 } 154 155 static void strongarm_pic_mem_write(void *opaque, hwaddr offset, 156 uint64_t value, unsigned size) 157 { 158 StrongARMPICState *s = opaque; 159 160 switch (offset) { 161 case ICMR: 162 s->enabled = value; 163 break; 164 case ICLR: 165 s->is_fiq = value; 166 break; 167 case ICCR: 168 s->int_idle = (value & 1) ? 0 : ~0; 169 break; 170 default: 171 printf("%s: Bad register offset 0x" TARGET_FMT_plx "\n", 172 __func__, offset); 173 break; 174 } 175 strongarm_pic_update(s); 176 } 177 178 static const MemoryRegionOps strongarm_pic_ops = { 179 .read = strongarm_pic_mem_read, 180 .write = strongarm_pic_mem_write, 181 .endianness = DEVICE_NATIVE_ENDIAN, 182 }; 183 184 static void strongarm_pic_initfn(Object *obj) 185 { 186 DeviceState *dev = DEVICE(obj); 187 StrongARMPICState *s = STRONGARM_PIC(obj); 188 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 189 190 qdev_init_gpio_in(dev, strongarm_pic_set_irq, SA_PIC_SRCS); 191 memory_region_init_io(&s->iomem, obj, &strongarm_pic_ops, s, 192 "pic", 0x1000); 193 sysbus_init_mmio(sbd, &s->iomem); 194 sysbus_init_irq(sbd, &s->irq); 195 sysbus_init_irq(sbd, &s->fiq); 196 } 197 198 static int strongarm_pic_post_load(void *opaque, int version_id) 199 { 200 strongarm_pic_update(opaque); 201 return 0; 202 } 203 204 static VMStateDescription vmstate_strongarm_pic_regs = { 205 .name = "strongarm_pic", 206 .version_id = 0, 207 .minimum_version_id = 0, 208 .post_load = strongarm_pic_post_load, 209 .fields = (VMStateField[]) { 210 VMSTATE_UINT32(pending, StrongARMPICState), 211 VMSTATE_UINT32(enabled, StrongARMPICState), 212 VMSTATE_UINT32(is_fiq, StrongARMPICState), 213 VMSTATE_UINT32(int_idle, StrongARMPICState), 214 VMSTATE_END_OF_LIST(), 215 }, 216 }; 217 218 static void strongarm_pic_class_init(ObjectClass *klass, void *data) 219 { 220 DeviceClass *dc = DEVICE_CLASS(klass); 221 222 dc->desc = "StrongARM PIC"; 223 dc->vmsd = &vmstate_strongarm_pic_regs; 224 } 225 226 static const TypeInfo strongarm_pic_info = { 227 .name = TYPE_STRONGARM_PIC, 228 .parent = TYPE_SYS_BUS_DEVICE, 229 .instance_size = sizeof(StrongARMPICState), 230 .instance_init = strongarm_pic_initfn, 231 .class_init = strongarm_pic_class_init, 232 }; 233 234 /* Real-Time Clock */ 235 #define RTAR 0x00 /* RTC Alarm register */ 236 #define RCNR 0x04 /* RTC Counter register */ 237 #define RTTR 0x08 /* RTC Timer Trim register */ 238 #define RTSR 0x10 /* RTC Status register */ 239 240 #define RTSR_AL (1 << 0) /* RTC Alarm detected */ 241 #define RTSR_HZ (1 << 1) /* RTC 1Hz detected */ 242 #define RTSR_ALE (1 << 2) /* RTC Alarm enable */ 243 #define RTSR_HZE (1 << 3) /* RTC 1Hz enable */ 244 245 /* 16 LSB of RTTR are clockdiv for internal trim logic, 246 * trim delete isn't emulated, so 247 * f = 32 768 / (RTTR_trim + 1) */ 248 249 #define TYPE_STRONGARM_RTC "strongarm-rtc" 250 #define STRONGARM_RTC(obj) \ 251 OBJECT_CHECK(StrongARMRTCState, (obj), TYPE_STRONGARM_RTC) 252 253 typedef struct StrongARMRTCState { 254 SysBusDevice parent_obj; 255 256 MemoryRegion iomem; 257 uint32_t rttr; 258 uint32_t rtsr; 259 uint32_t rtar; 260 uint32_t last_rcnr; 261 int64_t last_hz; 262 QEMUTimer *rtc_alarm; 263 QEMUTimer *rtc_hz; 264 qemu_irq rtc_irq; 265 qemu_irq rtc_hz_irq; 266 } StrongARMRTCState; 267 268 static inline void strongarm_rtc_int_update(StrongARMRTCState *s) 269 { 270 qemu_set_irq(s->rtc_irq, s->rtsr & RTSR_AL); 271 qemu_set_irq(s->rtc_hz_irq, s->rtsr & RTSR_HZ); 272 } 273 274 static void strongarm_rtc_hzupdate(StrongARMRTCState *s) 275 { 276 int64_t rt = qemu_clock_get_ms(rtc_clock); 277 s->last_rcnr += ((rt - s->last_hz) << 15) / 278 (1000 * ((s->rttr & 0xffff) + 1)); 279 s->last_hz = rt; 280 } 281 282 static inline void strongarm_rtc_timer_update(StrongARMRTCState *s) 283 { 284 if ((s->rtsr & RTSR_HZE) && !(s->rtsr & RTSR_HZ)) { 285 timer_mod(s->rtc_hz, s->last_hz + 1000); 286 } else { 287 timer_del(s->rtc_hz); 288 } 289 290 if ((s->rtsr & RTSR_ALE) && !(s->rtsr & RTSR_AL)) { 291 timer_mod(s->rtc_alarm, s->last_hz + 292 (((s->rtar - s->last_rcnr) * 1000 * 293 ((s->rttr & 0xffff) + 1)) >> 15)); 294 } else { 295 timer_del(s->rtc_alarm); 296 } 297 } 298 299 static inline void strongarm_rtc_alarm_tick(void *opaque) 300 { 301 StrongARMRTCState *s = opaque; 302 s->rtsr |= RTSR_AL; 303 strongarm_rtc_timer_update(s); 304 strongarm_rtc_int_update(s); 305 } 306 307 static inline void strongarm_rtc_hz_tick(void *opaque) 308 { 309 StrongARMRTCState *s = opaque; 310 s->rtsr |= RTSR_HZ; 311 strongarm_rtc_timer_update(s); 312 strongarm_rtc_int_update(s); 313 } 314 315 static uint64_t strongarm_rtc_read(void *opaque, hwaddr addr, 316 unsigned size) 317 { 318 StrongARMRTCState *s = opaque; 319 320 switch (addr) { 321 case RTTR: 322 return s->rttr; 323 case RTSR: 324 return s->rtsr; 325 case RTAR: 326 return s->rtar; 327 case RCNR: 328 return s->last_rcnr + 329 ((qemu_clock_get_ms(rtc_clock) - s->last_hz) << 15) / 330 (1000 * ((s->rttr & 0xffff) + 1)); 331 default: 332 printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr); 333 return 0; 334 } 335 } 336 337 static void strongarm_rtc_write(void *opaque, hwaddr addr, 338 uint64_t value, unsigned size) 339 { 340 StrongARMRTCState *s = opaque; 341 uint32_t old_rtsr; 342 343 switch (addr) { 344 case RTTR: 345 strongarm_rtc_hzupdate(s); 346 s->rttr = value; 347 strongarm_rtc_timer_update(s); 348 break; 349 350 case RTSR: 351 old_rtsr = s->rtsr; 352 s->rtsr = (value & (RTSR_ALE | RTSR_HZE)) | 353 (s->rtsr & ~(value & (RTSR_AL | RTSR_HZ))); 354 355 if (s->rtsr != old_rtsr) { 356 strongarm_rtc_timer_update(s); 357 } 358 359 strongarm_rtc_int_update(s); 360 break; 361 362 case RTAR: 363 s->rtar = value; 364 strongarm_rtc_timer_update(s); 365 break; 366 367 case RCNR: 368 strongarm_rtc_hzupdate(s); 369 s->last_rcnr = value; 370 strongarm_rtc_timer_update(s); 371 break; 372 373 default: 374 printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr); 375 } 376 } 377 378 static const MemoryRegionOps strongarm_rtc_ops = { 379 .read = strongarm_rtc_read, 380 .write = strongarm_rtc_write, 381 .endianness = DEVICE_NATIVE_ENDIAN, 382 }; 383 384 static void strongarm_rtc_init(Object *obj) 385 { 386 StrongARMRTCState *s = STRONGARM_RTC(obj); 387 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 388 struct tm tm; 389 390 s->rttr = 0x0; 391 s->rtsr = 0; 392 393 qemu_get_timedate(&tm, 0); 394 395 s->last_rcnr = (uint32_t) mktimegm(&tm); 396 s->last_hz = qemu_clock_get_ms(rtc_clock); 397 398 s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s); 399 s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s); 400 401 sysbus_init_irq(dev, &s->rtc_irq); 402 sysbus_init_irq(dev, &s->rtc_hz_irq); 403 404 memory_region_init_io(&s->iomem, obj, &strongarm_rtc_ops, s, 405 "rtc", 0x10000); 406 sysbus_init_mmio(dev, &s->iomem); 407 } 408 409 static void strongarm_rtc_pre_save(void *opaque) 410 { 411 StrongARMRTCState *s = opaque; 412 413 strongarm_rtc_hzupdate(s); 414 } 415 416 static int strongarm_rtc_post_load(void *opaque, int version_id) 417 { 418 StrongARMRTCState *s = opaque; 419 420 strongarm_rtc_timer_update(s); 421 strongarm_rtc_int_update(s); 422 423 return 0; 424 } 425 426 static const VMStateDescription vmstate_strongarm_rtc_regs = { 427 .name = "strongarm-rtc", 428 .version_id = 0, 429 .minimum_version_id = 0, 430 .pre_save = strongarm_rtc_pre_save, 431 .post_load = strongarm_rtc_post_load, 432 .fields = (VMStateField[]) { 433 VMSTATE_UINT32(rttr, StrongARMRTCState), 434 VMSTATE_UINT32(rtsr, StrongARMRTCState), 435 VMSTATE_UINT32(rtar, StrongARMRTCState), 436 VMSTATE_UINT32(last_rcnr, StrongARMRTCState), 437 VMSTATE_INT64(last_hz, StrongARMRTCState), 438 VMSTATE_END_OF_LIST(), 439 }, 440 }; 441 442 static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data) 443 { 444 DeviceClass *dc = DEVICE_CLASS(klass); 445 446 dc->desc = "StrongARM RTC Controller"; 447 dc->vmsd = &vmstate_strongarm_rtc_regs; 448 } 449 450 static const TypeInfo strongarm_rtc_sysbus_info = { 451 .name = TYPE_STRONGARM_RTC, 452 .parent = TYPE_SYS_BUS_DEVICE, 453 .instance_size = sizeof(StrongARMRTCState), 454 .instance_init = strongarm_rtc_init, 455 .class_init = strongarm_rtc_sysbus_class_init, 456 }; 457 458 /* GPIO */ 459 #define GPLR 0x00 460 #define GPDR 0x04 461 #define GPSR 0x08 462 #define GPCR 0x0c 463 #define GRER 0x10 464 #define GFER 0x14 465 #define GEDR 0x18 466 #define GAFR 0x1c 467 468 #define TYPE_STRONGARM_GPIO "strongarm-gpio" 469 #define STRONGARM_GPIO(obj) \ 470 OBJECT_CHECK(StrongARMGPIOInfo, (obj), TYPE_STRONGARM_GPIO) 471 472 typedef struct StrongARMGPIOInfo StrongARMGPIOInfo; 473 struct StrongARMGPIOInfo { 474 SysBusDevice busdev; 475 MemoryRegion iomem; 476 qemu_irq handler[28]; 477 qemu_irq irqs[11]; 478 qemu_irq irqX; 479 480 uint32_t ilevel; 481 uint32_t olevel; 482 uint32_t dir; 483 uint32_t rising; 484 uint32_t falling; 485 uint32_t status; 486 uint32_t gafr; 487 488 uint32_t prev_level; 489 }; 490 491 492 static void strongarm_gpio_irq_update(StrongARMGPIOInfo *s) 493 { 494 int i; 495 for (i = 0; i < 11; i++) { 496 qemu_set_irq(s->irqs[i], s->status & (1 << i)); 497 } 498 499 qemu_set_irq(s->irqX, (s->status & ~0x7ff)); 500 } 501 502 static void strongarm_gpio_set(void *opaque, int line, int level) 503 { 504 StrongARMGPIOInfo *s = opaque; 505 uint32_t mask; 506 507 mask = 1 << line; 508 509 if (level) { 510 s->status |= s->rising & mask & 511 ~s->ilevel & ~s->dir; 512 s->ilevel |= mask; 513 } else { 514 s->status |= s->falling & mask & 515 s->ilevel & ~s->dir; 516 s->ilevel &= ~mask; 517 } 518 519 if (s->status & mask) { 520 strongarm_gpio_irq_update(s); 521 } 522 } 523 524 static void strongarm_gpio_handler_update(StrongARMGPIOInfo *s) 525 { 526 uint32_t level, diff; 527 int bit; 528 529 level = s->olevel & s->dir; 530 531 for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) { 532 bit = ctz32(diff); 533 qemu_set_irq(s->handler[bit], (level >> bit) & 1); 534 } 535 536 s->prev_level = level; 537 } 538 539 static uint64_t strongarm_gpio_read(void *opaque, hwaddr offset, 540 unsigned size) 541 { 542 StrongARMGPIOInfo *s = opaque; 543 544 switch (offset) { 545 case GPDR: /* GPIO Pin-Direction registers */ 546 return s->dir; 547 548 case GPSR: /* GPIO Pin-Output Set registers */ 549 qemu_log_mask(LOG_GUEST_ERROR, 550 "strongarm GPIO: read from write only register GPSR\n"); 551 return 0; 552 553 case GPCR: /* GPIO Pin-Output Clear registers */ 554 qemu_log_mask(LOG_GUEST_ERROR, 555 "strongarm GPIO: read from write only register GPCR\n"); 556 return 0; 557 558 case GRER: /* GPIO Rising-Edge Detect Enable registers */ 559 return s->rising; 560 561 case GFER: /* GPIO Falling-Edge Detect Enable registers */ 562 return s->falling; 563 564 case GAFR: /* GPIO Alternate Function registers */ 565 return s->gafr; 566 567 case GPLR: /* GPIO Pin-Level registers */ 568 return (s->olevel & s->dir) | 569 (s->ilevel & ~s->dir); 570 571 case GEDR: /* GPIO Edge Detect Status registers */ 572 return s->status; 573 574 default: 575 printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset); 576 } 577 578 return 0; 579 } 580 581 static void strongarm_gpio_write(void *opaque, hwaddr offset, 582 uint64_t value, unsigned size) 583 { 584 StrongARMGPIOInfo *s = opaque; 585 586 switch (offset) { 587 case GPDR: /* GPIO Pin-Direction registers */ 588 s->dir = value; 589 strongarm_gpio_handler_update(s); 590 break; 591 592 case GPSR: /* GPIO Pin-Output Set registers */ 593 s->olevel |= value; 594 strongarm_gpio_handler_update(s); 595 break; 596 597 case GPCR: /* GPIO Pin-Output Clear registers */ 598 s->olevel &= ~value; 599 strongarm_gpio_handler_update(s); 600 break; 601 602 case GRER: /* GPIO Rising-Edge Detect Enable registers */ 603 s->rising = value; 604 break; 605 606 case GFER: /* GPIO Falling-Edge Detect Enable registers */ 607 s->falling = value; 608 break; 609 610 case GAFR: /* GPIO Alternate Function registers */ 611 s->gafr = value; 612 break; 613 614 case GEDR: /* GPIO Edge Detect Status registers */ 615 s->status &= ~value; 616 strongarm_gpio_irq_update(s); 617 break; 618 619 default: 620 printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset); 621 } 622 } 623 624 static const MemoryRegionOps strongarm_gpio_ops = { 625 .read = strongarm_gpio_read, 626 .write = strongarm_gpio_write, 627 .endianness = DEVICE_NATIVE_ENDIAN, 628 }; 629 630 static DeviceState *strongarm_gpio_init(hwaddr base, 631 DeviceState *pic) 632 { 633 DeviceState *dev; 634 int i; 635 636 dev = qdev_create(NULL, TYPE_STRONGARM_GPIO); 637 qdev_init_nofail(dev); 638 639 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 640 for (i = 0; i < 12; i++) 641 sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, 642 qdev_get_gpio_in(pic, SA_PIC_GPIO0_EDGE + i)); 643 644 return dev; 645 } 646 647 static void strongarm_gpio_initfn(Object *obj) 648 { 649 DeviceState *dev = DEVICE(obj); 650 StrongARMGPIOInfo *s = STRONGARM_GPIO(obj); 651 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 652 int i; 653 654 qdev_init_gpio_in(dev, strongarm_gpio_set, 28); 655 qdev_init_gpio_out(dev, s->handler, 28); 656 657 memory_region_init_io(&s->iomem, obj, &strongarm_gpio_ops, s, 658 "gpio", 0x1000); 659 660 sysbus_init_mmio(sbd, &s->iomem); 661 for (i = 0; i < 11; i++) { 662 sysbus_init_irq(sbd, &s->irqs[i]); 663 } 664 sysbus_init_irq(sbd, &s->irqX); 665 } 666 667 static const VMStateDescription vmstate_strongarm_gpio_regs = { 668 .name = "strongarm-gpio", 669 .version_id = 0, 670 .minimum_version_id = 0, 671 .fields = (VMStateField[]) { 672 VMSTATE_UINT32(ilevel, StrongARMGPIOInfo), 673 VMSTATE_UINT32(olevel, StrongARMGPIOInfo), 674 VMSTATE_UINT32(dir, StrongARMGPIOInfo), 675 VMSTATE_UINT32(rising, StrongARMGPIOInfo), 676 VMSTATE_UINT32(falling, StrongARMGPIOInfo), 677 VMSTATE_UINT32(status, StrongARMGPIOInfo), 678 VMSTATE_UINT32(gafr, StrongARMGPIOInfo), 679 VMSTATE_UINT32(prev_level, StrongARMGPIOInfo), 680 VMSTATE_END_OF_LIST(), 681 }, 682 }; 683 684 static void strongarm_gpio_class_init(ObjectClass *klass, void *data) 685 { 686 DeviceClass *dc = DEVICE_CLASS(klass); 687 688 dc->desc = "StrongARM GPIO controller"; 689 dc->vmsd = &vmstate_strongarm_gpio_regs; 690 } 691 692 static const TypeInfo strongarm_gpio_info = { 693 .name = TYPE_STRONGARM_GPIO, 694 .parent = TYPE_SYS_BUS_DEVICE, 695 .instance_size = sizeof(StrongARMGPIOInfo), 696 .instance_init = strongarm_gpio_initfn, 697 .class_init = strongarm_gpio_class_init, 698 }; 699 700 /* Peripheral Pin Controller */ 701 #define PPDR 0x00 702 #define PPSR 0x04 703 #define PPAR 0x08 704 #define PSDR 0x0c 705 #define PPFR 0x10 706 707 #define TYPE_STRONGARM_PPC "strongarm-ppc" 708 #define STRONGARM_PPC(obj) \ 709 OBJECT_CHECK(StrongARMPPCInfo, (obj), TYPE_STRONGARM_PPC) 710 711 typedef struct StrongARMPPCInfo StrongARMPPCInfo; 712 struct StrongARMPPCInfo { 713 SysBusDevice parent_obj; 714 715 MemoryRegion iomem; 716 qemu_irq handler[28]; 717 718 uint32_t ilevel; 719 uint32_t olevel; 720 uint32_t dir; 721 uint32_t ppar; 722 uint32_t psdr; 723 uint32_t ppfr; 724 725 uint32_t prev_level; 726 }; 727 728 static void strongarm_ppc_set(void *opaque, int line, int level) 729 { 730 StrongARMPPCInfo *s = opaque; 731 732 if (level) { 733 s->ilevel |= 1 << line; 734 } else { 735 s->ilevel &= ~(1 << line); 736 } 737 } 738 739 static void strongarm_ppc_handler_update(StrongARMPPCInfo *s) 740 { 741 uint32_t level, diff; 742 int bit; 743 744 level = s->olevel & s->dir; 745 746 for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) { 747 bit = ctz32(diff); 748 qemu_set_irq(s->handler[bit], (level >> bit) & 1); 749 } 750 751 s->prev_level = level; 752 } 753 754 static uint64_t strongarm_ppc_read(void *opaque, hwaddr offset, 755 unsigned size) 756 { 757 StrongARMPPCInfo *s = opaque; 758 759 switch (offset) { 760 case PPDR: /* PPC Pin Direction registers */ 761 return s->dir | ~0x3fffff; 762 763 case PPSR: /* PPC Pin State registers */ 764 return (s->olevel & s->dir) | 765 (s->ilevel & ~s->dir) | 766 ~0x3fffff; 767 768 case PPAR: 769 return s->ppar | ~0x41000; 770 771 case PSDR: 772 return s->psdr; 773 774 case PPFR: 775 return s->ppfr | ~0x7f001; 776 777 default: 778 printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset); 779 } 780 781 return 0; 782 } 783 784 static void strongarm_ppc_write(void *opaque, hwaddr offset, 785 uint64_t value, unsigned size) 786 { 787 StrongARMPPCInfo *s = opaque; 788 789 switch (offset) { 790 case PPDR: /* PPC Pin Direction registers */ 791 s->dir = value & 0x3fffff; 792 strongarm_ppc_handler_update(s); 793 break; 794 795 case PPSR: /* PPC Pin State registers */ 796 s->olevel = value & s->dir & 0x3fffff; 797 strongarm_ppc_handler_update(s); 798 break; 799 800 case PPAR: 801 s->ppar = value & 0x41000; 802 break; 803 804 case PSDR: 805 s->psdr = value & 0x3fffff; 806 break; 807 808 case PPFR: 809 s->ppfr = value & 0x7f001; 810 break; 811 812 default: 813 printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset); 814 } 815 } 816 817 static const MemoryRegionOps strongarm_ppc_ops = { 818 .read = strongarm_ppc_read, 819 .write = strongarm_ppc_write, 820 .endianness = DEVICE_NATIVE_ENDIAN, 821 }; 822 823 static void strongarm_ppc_init(Object *obj) 824 { 825 DeviceState *dev = DEVICE(obj); 826 StrongARMPPCInfo *s = STRONGARM_PPC(obj); 827 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 828 829 qdev_init_gpio_in(dev, strongarm_ppc_set, 22); 830 qdev_init_gpio_out(dev, s->handler, 22); 831 832 memory_region_init_io(&s->iomem, obj, &strongarm_ppc_ops, s, 833 "ppc", 0x1000); 834 835 sysbus_init_mmio(sbd, &s->iomem); 836 } 837 838 static const VMStateDescription vmstate_strongarm_ppc_regs = { 839 .name = "strongarm-ppc", 840 .version_id = 0, 841 .minimum_version_id = 0, 842 .fields = (VMStateField[]) { 843 VMSTATE_UINT32(ilevel, StrongARMPPCInfo), 844 VMSTATE_UINT32(olevel, StrongARMPPCInfo), 845 VMSTATE_UINT32(dir, StrongARMPPCInfo), 846 VMSTATE_UINT32(ppar, StrongARMPPCInfo), 847 VMSTATE_UINT32(psdr, StrongARMPPCInfo), 848 VMSTATE_UINT32(ppfr, StrongARMPPCInfo), 849 VMSTATE_UINT32(prev_level, StrongARMPPCInfo), 850 VMSTATE_END_OF_LIST(), 851 }, 852 }; 853 854 static void strongarm_ppc_class_init(ObjectClass *klass, void *data) 855 { 856 DeviceClass *dc = DEVICE_CLASS(klass); 857 858 dc->desc = "StrongARM PPC controller"; 859 dc->vmsd = &vmstate_strongarm_ppc_regs; 860 } 861 862 static const TypeInfo strongarm_ppc_info = { 863 .name = TYPE_STRONGARM_PPC, 864 .parent = TYPE_SYS_BUS_DEVICE, 865 .instance_size = sizeof(StrongARMPPCInfo), 866 .instance_init = strongarm_ppc_init, 867 .class_init = strongarm_ppc_class_init, 868 }; 869 870 /* UART Ports */ 871 #define UTCR0 0x00 872 #define UTCR1 0x04 873 #define UTCR2 0x08 874 #define UTCR3 0x0c 875 #define UTDR 0x14 876 #define UTSR0 0x1c 877 #define UTSR1 0x20 878 879 #define UTCR0_PE (1 << 0) /* Parity enable */ 880 #define UTCR0_OES (1 << 1) /* Even parity */ 881 #define UTCR0_SBS (1 << 2) /* 2 stop bits */ 882 #define UTCR0_DSS (1 << 3) /* 8-bit data */ 883 884 #define UTCR3_RXE (1 << 0) /* Rx enable */ 885 #define UTCR3_TXE (1 << 1) /* Tx enable */ 886 #define UTCR3_BRK (1 << 2) /* Force Break */ 887 #define UTCR3_RIE (1 << 3) /* Rx int enable */ 888 #define UTCR3_TIE (1 << 4) /* Tx int enable */ 889 #define UTCR3_LBM (1 << 5) /* Loopback */ 890 891 #define UTSR0_TFS (1 << 0) /* Tx FIFO nearly empty */ 892 #define UTSR0_RFS (1 << 1) /* Rx FIFO nearly full */ 893 #define UTSR0_RID (1 << 2) /* Receiver Idle */ 894 #define UTSR0_RBB (1 << 3) /* Receiver begin break */ 895 #define UTSR0_REB (1 << 4) /* Receiver end break */ 896 #define UTSR0_EIF (1 << 5) /* Error in FIFO */ 897 898 #define UTSR1_RNE (1 << 1) /* Receive FIFO not empty */ 899 #define UTSR1_TNF (1 << 2) /* Transmit FIFO not full */ 900 #define UTSR1_PRE (1 << 3) /* Parity error */ 901 #define UTSR1_FRE (1 << 4) /* Frame error */ 902 #define UTSR1_ROR (1 << 5) /* Receive Over Run */ 903 904 #define RX_FIFO_PRE (1 << 8) 905 #define RX_FIFO_FRE (1 << 9) 906 #define RX_FIFO_ROR (1 << 10) 907 908 #define TYPE_STRONGARM_UART "strongarm-uart" 909 #define STRONGARM_UART(obj) \ 910 OBJECT_CHECK(StrongARMUARTState, (obj), TYPE_STRONGARM_UART) 911 912 typedef struct StrongARMUARTState { 913 SysBusDevice parent_obj; 914 915 MemoryRegion iomem; 916 CharBackend chr; 917 qemu_irq irq; 918 919 uint8_t utcr0; 920 uint16_t brd; 921 uint8_t utcr3; 922 uint8_t utsr0; 923 uint8_t utsr1; 924 925 uint8_t tx_fifo[8]; 926 uint8_t tx_start; 927 uint8_t tx_len; 928 uint16_t rx_fifo[12]; /* value + error flags in high bits */ 929 uint8_t rx_start; 930 uint8_t rx_len; 931 932 uint64_t char_transmit_time; /* time to transmit a char in ticks*/ 933 bool wait_break_end; 934 QEMUTimer *rx_timeout_timer; 935 QEMUTimer *tx_timer; 936 } StrongARMUARTState; 937 938 static void strongarm_uart_update_status(StrongARMUARTState *s) 939 { 940 uint16_t utsr1 = 0; 941 942 if (s->tx_len != 8) { 943 utsr1 |= UTSR1_TNF; 944 } 945 946 if (s->rx_len != 0) { 947 uint16_t ent = s->rx_fifo[s->rx_start]; 948 949 utsr1 |= UTSR1_RNE; 950 if (ent & RX_FIFO_PRE) { 951 s->utsr1 |= UTSR1_PRE; 952 } 953 if (ent & RX_FIFO_FRE) { 954 s->utsr1 |= UTSR1_FRE; 955 } 956 if (ent & RX_FIFO_ROR) { 957 s->utsr1 |= UTSR1_ROR; 958 } 959 } 960 961 s->utsr1 = utsr1; 962 } 963 964 static void strongarm_uart_update_int_status(StrongARMUARTState *s) 965 { 966 uint16_t utsr0 = s->utsr0 & 967 (UTSR0_REB | UTSR0_RBB | UTSR0_RID); 968 int i; 969 970 if ((s->utcr3 & UTCR3_TXE) && 971 (s->utcr3 & UTCR3_TIE) && 972 s->tx_len <= 4) { 973 utsr0 |= UTSR0_TFS; 974 } 975 976 if ((s->utcr3 & UTCR3_RXE) && 977 (s->utcr3 & UTCR3_RIE) && 978 s->rx_len > 4) { 979 utsr0 |= UTSR0_RFS; 980 } 981 982 for (i = 0; i < s->rx_len && i < 4; i++) 983 if (s->rx_fifo[(s->rx_start + i) % 12] & ~0xff) { 984 utsr0 |= UTSR0_EIF; 985 break; 986 } 987 988 s->utsr0 = utsr0; 989 qemu_set_irq(s->irq, utsr0); 990 } 991 992 static void strongarm_uart_update_parameters(StrongARMUARTState *s) 993 { 994 int speed, parity, data_bits, stop_bits, frame_size; 995 QEMUSerialSetParams ssp; 996 997 /* Start bit. */ 998 frame_size = 1; 999 if (s->utcr0 & UTCR0_PE) { 1000 /* Parity bit. */ 1001 frame_size++; 1002 if (s->utcr0 & UTCR0_OES) { 1003 parity = 'E'; 1004 } else { 1005 parity = 'O'; 1006 } 1007 } else { 1008 parity = 'N'; 1009 } 1010 if (s->utcr0 & UTCR0_SBS) { 1011 stop_bits = 2; 1012 } else { 1013 stop_bits = 1; 1014 } 1015 1016 data_bits = (s->utcr0 & UTCR0_DSS) ? 8 : 7; 1017 frame_size += data_bits + stop_bits; 1018 speed = 3686400 / 16 / (s->brd + 1); 1019 ssp.speed = speed; 1020 ssp.parity = parity; 1021 ssp.data_bits = data_bits; 1022 ssp.stop_bits = stop_bits; 1023 s->char_transmit_time = (NANOSECONDS_PER_SECOND / speed) * frame_size; 1024 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 1025 1026 DPRINTF(stderr, "%s speed=%d parity=%c data=%d stop=%d\n", s->chr->label, 1027 speed, parity, data_bits, stop_bits); 1028 } 1029 1030 static void strongarm_uart_rx_to(void *opaque) 1031 { 1032 StrongARMUARTState *s = opaque; 1033 1034 if (s->rx_len) { 1035 s->utsr0 |= UTSR0_RID; 1036 strongarm_uart_update_int_status(s); 1037 } 1038 } 1039 1040 static void strongarm_uart_rx_push(StrongARMUARTState *s, uint16_t c) 1041 { 1042 if ((s->utcr3 & UTCR3_RXE) == 0) { 1043 /* rx disabled */ 1044 return; 1045 } 1046 1047 if (s->wait_break_end) { 1048 s->utsr0 |= UTSR0_REB; 1049 s->wait_break_end = false; 1050 } 1051 1052 if (s->rx_len < 12) { 1053 s->rx_fifo[(s->rx_start + s->rx_len) % 12] = c; 1054 s->rx_len++; 1055 } else 1056 s->rx_fifo[(s->rx_start + 11) % 12] |= RX_FIFO_ROR; 1057 } 1058 1059 static int strongarm_uart_can_receive(void *opaque) 1060 { 1061 StrongARMUARTState *s = opaque; 1062 1063 if (s->rx_len == 12) { 1064 return 0; 1065 } 1066 /* It's best not to get more than 2/3 of RX FIFO, so advertise that much */ 1067 if (s->rx_len < 8) { 1068 return 8 - s->rx_len; 1069 } 1070 return 1; 1071 } 1072 1073 static void strongarm_uart_receive(void *opaque, const uint8_t *buf, int size) 1074 { 1075 StrongARMUARTState *s = opaque; 1076 int i; 1077 1078 for (i = 0; i < size; i++) { 1079 strongarm_uart_rx_push(s, buf[i]); 1080 } 1081 1082 /* call the timeout receive callback in 3 char transmit time */ 1083 timer_mod(s->rx_timeout_timer, 1084 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3); 1085 1086 strongarm_uart_update_status(s); 1087 strongarm_uart_update_int_status(s); 1088 } 1089 1090 static void strongarm_uart_event(void *opaque, int event) 1091 { 1092 StrongARMUARTState *s = opaque; 1093 if (event == CHR_EVENT_BREAK) { 1094 s->utsr0 |= UTSR0_RBB; 1095 strongarm_uart_rx_push(s, RX_FIFO_FRE); 1096 s->wait_break_end = true; 1097 strongarm_uart_update_status(s); 1098 strongarm_uart_update_int_status(s); 1099 } 1100 } 1101 1102 static void strongarm_uart_tx(void *opaque) 1103 { 1104 StrongARMUARTState *s = opaque; 1105 uint64_t new_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 1106 1107 if (s->utcr3 & UTCR3_LBM) /* loopback */ { 1108 strongarm_uart_receive(s, &s->tx_fifo[s->tx_start], 1); 1109 } else if (qemu_chr_fe_backend_connected(&s->chr)) { 1110 /* XXX this blocks entire thread. Rewrite to use 1111 * qemu_chr_fe_write and background I/O callbacks */ 1112 qemu_chr_fe_write_all(&s->chr, &s->tx_fifo[s->tx_start], 1); 1113 } 1114 1115 s->tx_start = (s->tx_start + 1) % 8; 1116 s->tx_len--; 1117 if (s->tx_len) { 1118 timer_mod(s->tx_timer, new_xmit_ts + s->char_transmit_time); 1119 } 1120 strongarm_uart_update_status(s); 1121 strongarm_uart_update_int_status(s); 1122 } 1123 1124 static uint64_t strongarm_uart_read(void *opaque, hwaddr addr, 1125 unsigned size) 1126 { 1127 StrongARMUARTState *s = opaque; 1128 uint16_t ret; 1129 1130 switch (addr) { 1131 case UTCR0: 1132 return s->utcr0; 1133 1134 case UTCR1: 1135 return s->brd >> 8; 1136 1137 case UTCR2: 1138 return s->brd & 0xff; 1139 1140 case UTCR3: 1141 return s->utcr3; 1142 1143 case UTDR: 1144 if (s->rx_len != 0) { 1145 ret = s->rx_fifo[s->rx_start]; 1146 s->rx_start = (s->rx_start + 1) % 12; 1147 s->rx_len--; 1148 strongarm_uart_update_status(s); 1149 strongarm_uart_update_int_status(s); 1150 return ret; 1151 } 1152 return 0; 1153 1154 case UTSR0: 1155 return s->utsr0; 1156 1157 case UTSR1: 1158 return s->utsr1; 1159 1160 default: 1161 printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr); 1162 return 0; 1163 } 1164 } 1165 1166 static void strongarm_uart_write(void *opaque, hwaddr addr, 1167 uint64_t value, unsigned size) 1168 { 1169 StrongARMUARTState *s = opaque; 1170 1171 switch (addr) { 1172 case UTCR0: 1173 s->utcr0 = value & 0x7f; 1174 strongarm_uart_update_parameters(s); 1175 break; 1176 1177 case UTCR1: 1178 s->brd = (s->brd & 0xff) | ((value & 0xf) << 8); 1179 strongarm_uart_update_parameters(s); 1180 break; 1181 1182 case UTCR2: 1183 s->brd = (s->brd & 0xf00) | (value & 0xff); 1184 strongarm_uart_update_parameters(s); 1185 break; 1186 1187 case UTCR3: 1188 s->utcr3 = value & 0x3f; 1189 if ((s->utcr3 & UTCR3_RXE) == 0) { 1190 s->rx_len = 0; 1191 } 1192 if ((s->utcr3 & UTCR3_TXE) == 0) { 1193 s->tx_len = 0; 1194 } 1195 strongarm_uart_update_status(s); 1196 strongarm_uart_update_int_status(s); 1197 break; 1198 1199 case UTDR: 1200 if ((s->utcr3 & UTCR3_TXE) && s->tx_len != 8) { 1201 s->tx_fifo[(s->tx_start + s->tx_len) % 8] = value; 1202 s->tx_len++; 1203 strongarm_uart_update_status(s); 1204 strongarm_uart_update_int_status(s); 1205 if (s->tx_len == 1) { 1206 strongarm_uart_tx(s); 1207 } 1208 } 1209 break; 1210 1211 case UTSR0: 1212 s->utsr0 = s->utsr0 & ~(value & 1213 (UTSR0_REB | UTSR0_RBB | UTSR0_RID)); 1214 strongarm_uart_update_int_status(s); 1215 break; 1216 1217 default: 1218 printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr); 1219 } 1220 } 1221 1222 static const MemoryRegionOps strongarm_uart_ops = { 1223 .read = strongarm_uart_read, 1224 .write = strongarm_uart_write, 1225 .endianness = DEVICE_NATIVE_ENDIAN, 1226 }; 1227 1228 static void strongarm_uart_init(Object *obj) 1229 { 1230 StrongARMUARTState *s = STRONGARM_UART(obj); 1231 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 1232 1233 memory_region_init_io(&s->iomem, obj, &strongarm_uart_ops, s, 1234 "uart", 0x10000); 1235 sysbus_init_mmio(dev, &s->iomem); 1236 sysbus_init_irq(dev, &s->irq); 1237 1238 s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_rx_to, s); 1239 s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s); 1240 } 1241 1242 static void strongarm_uart_realize(DeviceState *dev, Error **errp) 1243 { 1244 StrongARMUARTState *s = STRONGARM_UART(dev); 1245 1246 qemu_chr_fe_set_handlers(&s->chr, 1247 strongarm_uart_can_receive, 1248 strongarm_uart_receive, 1249 strongarm_uart_event, 1250 NULL, s, NULL, true); 1251 } 1252 1253 static void strongarm_uart_reset(DeviceState *dev) 1254 { 1255 StrongARMUARTState *s = STRONGARM_UART(dev); 1256 1257 s->utcr0 = UTCR0_DSS; /* 8 data, no parity */ 1258 s->brd = 23; /* 9600 */ 1259 /* enable send & recv - this actually violates spec */ 1260 s->utcr3 = UTCR3_TXE | UTCR3_RXE; 1261 1262 s->rx_len = s->tx_len = 0; 1263 1264 strongarm_uart_update_parameters(s); 1265 strongarm_uart_update_status(s); 1266 strongarm_uart_update_int_status(s); 1267 } 1268 1269 static int strongarm_uart_post_load(void *opaque, int version_id) 1270 { 1271 StrongARMUARTState *s = opaque; 1272 1273 strongarm_uart_update_parameters(s); 1274 strongarm_uart_update_status(s); 1275 strongarm_uart_update_int_status(s); 1276 1277 /* tx and restart timer */ 1278 if (s->tx_len) { 1279 strongarm_uart_tx(s); 1280 } 1281 1282 /* restart rx timeout timer */ 1283 if (s->rx_len) { 1284 timer_mod(s->rx_timeout_timer, 1285 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3); 1286 } 1287 1288 return 0; 1289 } 1290 1291 static const VMStateDescription vmstate_strongarm_uart_regs = { 1292 .name = "strongarm-uart", 1293 .version_id = 0, 1294 .minimum_version_id = 0, 1295 .post_load = strongarm_uart_post_load, 1296 .fields = (VMStateField[]) { 1297 VMSTATE_UINT8(utcr0, StrongARMUARTState), 1298 VMSTATE_UINT16(brd, StrongARMUARTState), 1299 VMSTATE_UINT8(utcr3, StrongARMUARTState), 1300 VMSTATE_UINT8(utsr0, StrongARMUARTState), 1301 VMSTATE_UINT8_ARRAY(tx_fifo, StrongARMUARTState, 8), 1302 VMSTATE_UINT8(tx_start, StrongARMUARTState), 1303 VMSTATE_UINT8(tx_len, StrongARMUARTState), 1304 VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMUARTState, 12), 1305 VMSTATE_UINT8(rx_start, StrongARMUARTState), 1306 VMSTATE_UINT8(rx_len, StrongARMUARTState), 1307 VMSTATE_BOOL(wait_break_end, StrongARMUARTState), 1308 VMSTATE_END_OF_LIST(), 1309 }, 1310 }; 1311 1312 static Property strongarm_uart_properties[] = { 1313 DEFINE_PROP_CHR("chardev", StrongARMUARTState, chr), 1314 DEFINE_PROP_END_OF_LIST(), 1315 }; 1316 1317 static void strongarm_uart_class_init(ObjectClass *klass, void *data) 1318 { 1319 DeviceClass *dc = DEVICE_CLASS(klass); 1320 1321 dc->desc = "StrongARM UART controller"; 1322 dc->reset = strongarm_uart_reset; 1323 dc->vmsd = &vmstate_strongarm_uart_regs; 1324 dc->props = strongarm_uart_properties; 1325 dc->realize = strongarm_uart_realize; 1326 } 1327 1328 static const TypeInfo strongarm_uart_info = { 1329 .name = TYPE_STRONGARM_UART, 1330 .parent = TYPE_SYS_BUS_DEVICE, 1331 .instance_size = sizeof(StrongARMUARTState), 1332 .instance_init = strongarm_uart_init, 1333 .class_init = strongarm_uart_class_init, 1334 }; 1335 1336 /* Synchronous Serial Ports */ 1337 1338 #define TYPE_STRONGARM_SSP "strongarm-ssp" 1339 #define STRONGARM_SSP(obj) \ 1340 OBJECT_CHECK(StrongARMSSPState, (obj), TYPE_STRONGARM_SSP) 1341 1342 typedef struct StrongARMSSPState { 1343 SysBusDevice parent_obj; 1344 1345 MemoryRegion iomem; 1346 qemu_irq irq; 1347 SSIBus *bus; 1348 1349 uint16_t sscr[2]; 1350 uint16_t sssr; 1351 1352 uint16_t rx_fifo[8]; 1353 uint8_t rx_level; 1354 uint8_t rx_start; 1355 } StrongARMSSPState; 1356 1357 #define SSCR0 0x60 /* SSP Control register 0 */ 1358 #define SSCR1 0x64 /* SSP Control register 1 */ 1359 #define SSDR 0x6c /* SSP Data register */ 1360 #define SSSR 0x74 /* SSP Status register */ 1361 1362 /* Bitfields for above registers */ 1363 #define SSCR0_SPI(x) (((x) & 0x30) == 0x00) 1364 #define SSCR0_SSP(x) (((x) & 0x30) == 0x10) 1365 #define SSCR0_UWIRE(x) (((x) & 0x30) == 0x20) 1366 #define SSCR0_PSP(x) (((x) & 0x30) == 0x30) 1367 #define SSCR0_SSE (1 << 7) 1368 #define SSCR0_DSS(x) (((x) & 0xf) + 1) 1369 #define SSCR1_RIE (1 << 0) 1370 #define SSCR1_TIE (1 << 1) 1371 #define SSCR1_LBM (1 << 2) 1372 #define SSSR_TNF (1 << 2) 1373 #define SSSR_RNE (1 << 3) 1374 #define SSSR_TFS (1 << 5) 1375 #define SSSR_RFS (1 << 6) 1376 #define SSSR_ROR (1 << 7) 1377 #define SSSR_RW 0x0080 1378 1379 static void strongarm_ssp_int_update(StrongARMSSPState *s) 1380 { 1381 int level = 0; 1382 1383 level |= (s->sssr & SSSR_ROR); 1384 level |= (s->sssr & SSSR_RFS) && (s->sscr[1] & SSCR1_RIE); 1385 level |= (s->sssr & SSSR_TFS) && (s->sscr[1] & SSCR1_TIE); 1386 qemu_set_irq(s->irq, level); 1387 } 1388 1389 static void strongarm_ssp_fifo_update(StrongARMSSPState *s) 1390 { 1391 s->sssr &= ~SSSR_TFS; 1392 s->sssr &= ~SSSR_TNF; 1393 if (s->sscr[0] & SSCR0_SSE) { 1394 if (s->rx_level >= 4) { 1395 s->sssr |= SSSR_RFS; 1396 } else { 1397 s->sssr &= ~SSSR_RFS; 1398 } 1399 if (s->rx_level) { 1400 s->sssr |= SSSR_RNE; 1401 } else { 1402 s->sssr &= ~SSSR_RNE; 1403 } 1404 /* TX FIFO is never filled, so it is always in underrun 1405 condition if SSP is enabled */ 1406 s->sssr |= SSSR_TFS; 1407 s->sssr |= SSSR_TNF; 1408 } 1409 1410 strongarm_ssp_int_update(s); 1411 } 1412 1413 static uint64_t strongarm_ssp_read(void *opaque, hwaddr addr, 1414 unsigned size) 1415 { 1416 StrongARMSSPState *s = opaque; 1417 uint32_t retval; 1418 1419 switch (addr) { 1420 case SSCR0: 1421 return s->sscr[0]; 1422 case SSCR1: 1423 return s->sscr[1]; 1424 case SSSR: 1425 return s->sssr; 1426 case SSDR: 1427 if (~s->sscr[0] & SSCR0_SSE) { 1428 return 0xffffffff; 1429 } 1430 if (s->rx_level < 1) { 1431 printf("%s: SSP Rx Underrun\n", __func__); 1432 return 0xffffffff; 1433 } 1434 s->rx_level--; 1435 retval = s->rx_fifo[s->rx_start++]; 1436 s->rx_start &= 0x7; 1437 strongarm_ssp_fifo_update(s); 1438 return retval; 1439 default: 1440 printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr); 1441 break; 1442 } 1443 return 0; 1444 } 1445 1446 static void strongarm_ssp_write(void *opaque, hwaddr addr, 1447 uint64_t value, unsigned size) 1448 { 1449 StrongARMSSPState *s = opaque; 1450 1451 switch (addr) { 1452 case SSCR0: 1453 s->sscr[0] = value & 0xffbf; 1454 if ((s->sscr[0] & SSCR0_SSE) && SSCR0_DSS(value) < 4) { 1455 printf("%s: Wrong data size: %i bits\n", __func__, 1456 (int)SSCR0_DSS(value)); 1457 } 1458 if (!(value & SSCR0_SSE)) { 1459 s->sssr = 0; 1460 s->rx_level = 0; 1461 } 1462 strongarm_ssp_fifo_update(s); 1463 break; 1464 1465 case SSCR1: 1466 s->sscr[1] = value & 0x2f; 1467 if (value & SSCR1_LBM) { 1468 printf("%s: Attempt to use SSP LBM mode\n", __func__); 1469 } 1470 strongarm_ssp_fifo_update(s); 1471 break; 1472 1473 case SSSR: 1474 s->sssr &= ~(value & SSSR_RW); 1475 strongarm_ssp_int_update(s); 1476 break; 1477 1478 case SSDR: 1479 if (SSCR0_UWIRE(s->sscr[0])) { 1480 value &= 0xff; 1481 } else 1482 /* Note how 32bits overflow does no harm here */ 1483 value &= (1 << SSCR0_DSS(s->sscr[0])) - 1; 1484 1485 /* Data goes from here to the Tx FIFO and is shifted out from 1486 * there directly to the slave, no need to buffer it. 1487 */ 1488 if (s->sscr[0] & SSCR0_SSE) { 1489 uint32_t readval; 1490 if (s->sscr[1] & SSCR1_LBM) { 1491 readval = value; 1492 } else { 1493 readval = ssi_transfer(s->bus, value); 1494 } 1495 1496 if (s->rx_level < 0x08) { 1497 s->rx_fifo[(s->rx_start + s->rx_level++) & 0x7] = readval; 1498 } else { 1499 s->sssr |= SSSR_ROR; 1500 } 1501 } 1502 strongarm_ssp_fifo_update(s); 1503 break; 1504 1505 default: 1506 printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr); 1507 break; 1508 } 1509 } 1510 1511 static const MemoryRegionOps strongarm_ssp_ops = { 1512 .read = strongarm_ssp_read, 1513 .write = strongarm_ssp_write, 1514 .endianness = DEVICE_NATIVE_ENDIAN, 1515 }; 1516 1517 static int strongarm_ssp_post_load(void *opaque, int version_id) 1518 { 1519 StrongARMSSPState *s = opaque; 1520 1521 strongarm_ssp_fifo_update(s); 1522 1523 return 0; 1524 } 1525 1526 static void strongarm_ssp_init(Object *obj) 1527 { 1528 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 1529 DeviceState *dev = DEVICE(sbd); 1530 StrongARMSSPState *s = STRONGARM_SSP(dev); 1531 1532 sysbus_init_irq(sbd, &s->irq); 1533 1534 memory_region_init_io(&s->iomem, obj, &strongarm_ssp_ops, s, 1535 "ssp", 0x1000); 1536 sysbus_init_mmio(sbd, &s->iomem); 1537 1538 s->bus = ssi_create_bus(dev, "ssi"); 1539 } 1540 1541 static void strongarm_ssp_reset(DeviceState *dev) 1542 { 1543 StrongARMSSPState *s = STRONGARM_SSP(dev); 1544 1545 s->sssr = 0x03; /* 3 bit data, SPI, disabled */ 1546 s->rx_start = 0; 1547 s->rx_level = 0; 1548 } 1549 1550 static const VMStateDescription vmstate_strongarm_ssp_regs = { 1551 .name = "strongarm-ssp", 1552 .version_id = 0, 1553 .minimum_version_id = 0, 1554 .post_load = strongarm_ssp_post_load, 1555 .fields = (VMStateField[]) { 1556 VMSTATE_UINT16_ARRAY(sscr, StrongARMSSPState, 2), 1557 VMSTATE_UINT16(sssr, StrongARMSSPState), 1558 VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMSSPState, 8), 1559 VMSTATE_UINT8(rx_start, StrongARMSSPState), 1560 VMSTATE_UINT8(rx_level, StrongARMSSPState), 1561 VMSTATE_END_OF_LIST(), 1562 }, 1563 }; 1564 1565 static void strongarm_ssp_class_init(ObjectClass *klass, void *data) 1566 { 1567 DeviceClass *dc = DEVICE_CLASS(klass); 1568 1569 dc->desc = "StrongARM SSP controller"; 1570 dc->reset = strongarm_ssp_reset; 1571 dc->vmsd = &vmstate_strongarm_ssp_regs; 1572 } 1573 1574 static const TypeInfo strongarm_ssp_info = { 1575 .name = TYPE_STRONGARM_SSP, 1576 .parent = TYPE_SYS_BUS_DEVICE, 1577 .instance_size = sizeof(StrongARMSSPState), 1578 .instance_init = strongarm_ssp_init, 1579 .class_init = strongarm_ssp_class_init, 1580 }; 1581 1582 /* Main CPU functions */ 1583 StrongARMState *sa1110_init(MemoryRegion *sysmem, 1584 unsigned int sdram_size, const char *rev) 1585 { 1586 StrongARMState *s; 1587 int i; 1588 1589 s = g_new0(StrongARMState, 1); 1590 1591 if (!rev) { 1592 rev = "sa1110-b5"; 1593 } 1594 1595 if (strncmp(rev, "sa1110", 6)) { 1596 error_report("Machine requires a SA1110 processor."); 1597 exit(1); 1598 } 1599 1600 s->cpu = ARM_CPU(cpu_generic_init(TYPE_ARM_CPU, rev)); 1601 1602 if (!s->cpu) { 1603 error_report("Unable to find CPU definition"); 1604 exit(1); 1605 } 1606 1607 memory_region_allocate_system_memory(&s->sdram, NULL, "strongarm.sdram", 1608 sdram_size); 1609 memory_region_add_subregion(sysmem, SA_SDCS0, &s->sdram); 1610 1611 s->pic = sysbus_create_varargs("strongarm_pic", 0x90050000, 1612 qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ), 1613 qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ), 1614 NULL); 1615 1616 sysbus_create_varargs("pxa25x-timer", 0x90000000, 1617 qdev_get_gpio_in(s->pic, SA_PIC_OSTC0), 1618 qdev_get_gpio_in(s->pic, SA_PIC_OSTC1), 1619 qdev_get_gpio_in(s->pic, SA_PIC_OSTC2), 1620 qdev_get_gpio_in(s->pic, SA_PIC_OSTC3), 1621 NULL); 1622 1623 sysbus_create_simple(TYPE_STRONGARM_RTC, 0x90010000, 1624 qdev_get_gpio_in(s->pic, SA_PIC_RTC_ALARM)); 1625 1626 s->gpio = strongarm_gpio_init(0x90040000, s->pic); 1627 1628 s->ppc = sysbus_create_varargs(TYPE_STRONGARM_PPC, 0x90060000, NULL); 1629 1630 for (i = 0; sa_serial[i].io_base; i++) { 1631 DeviceState *dev = qdev_create(NULL, TYPE_STRONGARM_UART); 1632 qdev_prop_set_chr(dev, "chardev", serial_hds[i]); 1633 qdev_init_nofail(dev); 1634 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 1635 sa_serial[i].io_base); 1636 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, 1637 qdev_get_gpio_in(s->pic, sa_serial[i].irq)); 1638 } 1639 1640 s->ssp = sysbus_create_varargs(TYPE_STRONGARM_SSP, 0x80070000, 1641 qdev_get_gpio_in(s->pic, SA_PIC_SSP), NULL); 1642 s->ssp_bus = (SSIBus *)qdev_get_child_bus(s->ssp, "ssi"); 1643 1644 return s; 1645 } 1646 1647 static void strongarm_register_types(void) 1648 { 1649 type_register_static(&strongarm_pic_info); 1650 type_register_static(&strongarm_rtc_sysbus_info); 1651 type_register_static(&strongarm_gpio_info); 1652 type_register_static(&strongarm_ppc_info); 1653 type_register_static(&strongarm_uart_info); 1654 type_register_static(&strongarm_ssp_info); 1655 } 1656 1657 type_init(strongarm_register_types) 1658