1 /* 2 * StrongARM SA-1100/SA-1110 emulation 3 * 4 * Copyright (C) 2011 Dmitry Eremin-Solenikov 5 * 6 * Largely based on StrongARM emulation: 7 * Copyright (c) 2006 Openedhand Ltd. 8 * Written by Andrzej Zaborowski <balrog@zabor.org> 9 * 10 * UART code based on QEMU 16550A UART emulation 11 * Copyright (c) 2003-2004 Fabrice Bellard 12 * Copyright (c) 2008 Citrix Systems, Inc. 13 * 14 * This program is free software; you can redistribute it and/or modify 15 * it under the terms of the GNU General Public License version 2 as 16 * published by the Free Software Foundation. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License along 24 * with this program; if not, see <http://www.gnu.org/licenses/>. 25 * 26 * Contributions after 2012-01-13 are licensed under the terms of the 27 * GNU GPL, version 2 or (at your option) any later version. 28 */ 29 30 #include "qemu/osdep.h" 31 #include "hw/irq.h" 32 #include "hw/qdev-properties.h" 33 #include "hw/qdev-properties-system.h" 34 #include "hw/sysbus.h" 35 #include "migration/vmstate.h" 36 #include "strongarm.h" 37 #include "qemu/error-report.h" 38 #include "hw/arm/boot.h" 39 #include "chardev/char-fe.h" 40 #include "chardev/char-serial.h" 41 #include "sysemu/sysemu.h" 42 #include "sysemu/rtc.h" 43 #include "hw/ssi/ssi.h" 44 #include "qapi/error.h" 45 #include "qemu/cutils.h" 46 #include "qemu/log.h" 47 #include "qom/object.h" 48 #include "target/arm/cpu-qom.h" 49 #include "trace.h" 50 51 /* 52 TODO 53 - Implement cp15, c14 ? 54 - Implement cp15, c15 !!! (idle used in L) 55 - Implement idle mode handling/DIM 56 - Implement sleep mode/Wake sources 57 - Implement reset control 58 - Implement memory control regs 59 - PCMCIA handling 60 - Maybe support MBGNT/MBREQ 61 - DMA channels 62 - GPCLK 63 - IrDA 64 - MCP 65 - Enhance UART with modem signals 66 */ 67 68 static struct { 69 hwaddr io_base; 70 int irq; 71 } sa_serial[] = { 72 { 0x80010000, SA_PIC_UART1 }, 73 { 0x80030000, SA_PIC_UART2 }, 74 { 0x80050000, SA_PIC_UART3 }, 75 { 0, 0 } 76 }; 77 78 /* Interrupt Controller */ 79 80 #define TYPE_STRONGARM_PIC "strongarm_pic" 81 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMPICState, STRONGARM_PIC) 82 83 struct StrongARMPICState { 84 SysBusDevice parent_obj; 85 86 MemoryRegion iomem; 87 qemu_irq irq; 88 qemu_irq fiq; 89 90 uint32_t pending; 91 uint32_t enabled; 92 uint32_t is_fiq; 93 uint32_t int_idle; 94 }; 95 96 #define ICIP 0x00 97 #define ICMR 0x04 98 #define ICLR 0x08 99 #define ICFP 0x10 100 #define ICPR 0x20 101 #define ICCR 0x0c 102 103 #define SA_PIC_SRCS 32 104 105 106 static void strongarm_pic_update(void *opaque) 107 { 108 StrongARMPICState *s = opaque; 109 110 /* FIXME: reflect DIM */ 111 qemu_set_irq(s->fiq, s->pending & s->enabled & s->is_fiq); 112 qemu_set_irq(s->irq, s->pending & s->enabled & ~s->is_fiq); 113 } 114 115 static void strongarm_pic_set_irq(void *opaque, int irq, int level) 116 { 117 StrongARMPICState *s = opaque; 118 119 if (level) { 120 s->pending |= 1 << irq; 121 } else { 122 s->pending &= ~(1 << irq); 123 } 124 125 strongarm_pic_update(s); 126 } 127 128 static uint64_t strongarm_pic_mem_read(void *opaque, hwaddr offset, 129 unsigned size) 130 { 131 StrongARMPICState *s = opaque; 132 133 switch (offset) { 134 case ICIP: 135 return s->pending & ~s->is_fiq & s->enabled; 136 case ICMR: 137 return s->enabled; 138 case ICLR: 139 return s->is_fiq; 140 case ICCR: 141 return s->int_idle == 0; 142 case ICFP: 143 return s->pending & s->is_fiq & s->enabled; 144 case ICPR: 145 return s->pending; 146 default: 147 qemu_log_mask(LOG_GUEST_ERROR, 148 "%s: Bad register offset 0x"HWADDR_FMT_plx"\n", 149 __func__, offset); 150 return 0; 151 } 152 } 153 154 static void strongarm_pic_mem_write(void *opaque, hwaddr offset, 155 uint64_t value, unsigned size) 156 { 157 StrongARMPICState *s = opaque; 158 159 switch (offset) { 160 case ICMR: 161 s->enabled = value; 162 break; 163 case ICLR: 164 s->is_fiq = value; 165 break; 166 case ICCR: 167 s->int_idle = (value & 1) ? 0 : ~0; 168 break; 169 default: 170 qemu_log_mask(LOG_GUEST_ERROR, 171 "%s: Bad register offset 0x"HWADDR_FMT_plx"\n", 172 __func__, offset); 173 break; 174 } 175 strongarm_pic_update(s); 176 } 177 178 static const MemoryRegionOps strongarm_pic_ops = { 179 .read = strongarm_pic_mem_read, 180 .write = strongarm_pic_mem_write, 181 .endianness = DEVICE_NATIVE_ENDIAN, 182 }; 183 184 static void strongarm_pic_initfn(Object *obj) 185 { 186 DeviceState *dev = DEVICE(obj); 187 StrongARMPICState *s = STRONGARM_PIC(obj); 188 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 189 190 qdev_init_gpio_in(dev, strongarm_pic_set_irq, SA_PIC_SRCS); 191 memory_region_init_io(&s->iomem, obj, &strongarm_pic_ops, s, 192 "pic", 0x1000); 193 sysbus_init_mmio(sbd, &s->iomem); 194 sysbus_init_irq(sbd, &s->irq); 195 sysbus_init_irq(sbd, &s->fiq); 196 } 197 198 static int strongarm_pic_post_load(void *opaque, int version_id) 199 { 200 strongarm_pic_update(opaque); 201 return 0; 202 } 203 204 static const VMStateDescription vmstate_strongarm_pic_regs = { 205 .name = "strongarm_pic", 206 .version_id = 0, 207 .minimum_version_id = 0, 208 .post_load = strongarm_pic_post_load, 209 .fields = (const VMStateField[]) { 210 VMSTATE_UINT32(pending, StrongARMPICState), 211 VMSTATE_UINT32(enabled, StrongARMPICState), 212 VMSTATE_UINT32(is_fiq, StrongARMPICState), 213 VMSTATE_UINT32(int_idle, StrongARMPICState), 214 VMSTATE_END_OF_LIST(), 215 }, 216 }; 217 218 static void strongarm_pic_class_init(ObjectClass *klass, void *data) 219 { 220 DeviceClass *dc = DEVICE_CLASS(klass); 221 222 dc->desc = "StrongARM PIC"; 223 dc->vmsd = &vmstate_strongarm_pic_regs; 224 } 225 226 static const TypeInfo strongarm_pic_info = { 227 .name = TYPE_STRONGARM_PIC, 228 .parent = TYPE_SYS_BUS_DEVICE, 229 .instance_size = sizeof(StrongARMPICState), 230 .instance_init = strongarm_pic_initfn, 231 .class_init = strongarm_pic_class_init, 232 }; 233 234 /* Real-Time Clock */ 235 #define RTAR 0x00 /* RTC Alarm register */ 236 #define RCNR 0x04 /* RTC Counter register */ 237 #define RTTR 0x08 /* RTC Timer Trim register */ 238 #define RTSR 0x10 /* RTC Status register */ 239 240 #define RTSR_AL (1 << 0) /* RTC Alarm detected */ 241 #define RTSR_HZ (1 << 1) /* RTC 1Hz detected */ 242 #define RTSR_ALE (1 << 2) /* RTC Alarm enable */ 243 #define RTSR_HZE (1 << 3) /* RTC 1Hz enable */ 244 245 /* 16 LSB of RTTR are clockdiv for internal trim logic, 246 * trim delete isn't emulated, so 247 * f = 32 768 / (RTTR_trim + 1) */ 248 249 #define TYPE_STRONGARM_RTC "strongarm-rtc" 250 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMRTCState, STRONGARM_RTC) 251 252 struct StrongARMRTCState { 253 SysBusDevice parent_obj; 254 255 MemoryRegion iomem; 256 uint32_t rttr; 257 uint32_t rtsr; 258 uint32_t rtar; 259 uint32_t last_rcnr; 260 int64_t last_hz; 261 QEMUTimer *rtc_alarm; 262 QEMUTimer *rtc_hz; 263 qemu_irq rtc_irq; 264 qemu_irq rtc_hz_irq; 265 }; 266 267 static inline void strongarm_rtc_int_update(StrongARMRTCState *s) 268 { 269 qemu_set_irq(s->rtc_irq, s->rtsr & RTSR_AL); 270 qemu_set_irq(s->rtc_hz_irq, s->rtsr & RTSR_HZ); 271 } 272 273 static void strongarm_rtc_hzupdate(StrongARMRTCState *s) 274 { 275 int64_t rt = qemu_clock_get_ms(rtc_clock); 276 s->last_rcnr += ((rt - s->last_hz) << 15) / 277 (1000 * ((s->rttr & 0xffff) + 1)); 278 s->last_hz = rt; 279 } 280 281 static inline void strongarm_rtc_timer_update(StrongARMRTCState *s) 282 { 283 if ((s->rtsr & RTSR_HZE) && !(s->rtsr & RTSR_HZ)) { 284 timer_mod(s->rtc_hz, s->last_hz + 1000); 285 } else { 286 timer_del(s->rtc_hz); 287 } 288 289 if ((s->rtsr & RTSR_ALE) && !(s->rtsr & RTSR_AL)) { 290 timer_mod(s->rtc_alarm, s->last_hz + 291 (((s->rtar - s->last_rcnr) * 1000 * 292 ((s->rttr & 0xffff) + 1)) >> 15)); 293 } else { 294 timer_del(s->rtc_alarm); 295 } 296 } 297 298 static inline void strongarm_rtc_alarm_tick(void *opaque) 299 { 300 StrongARMRTCState *s = opaque; 301 s->rtsr |= RTSR_AL; 302 strongarm_rtc_timer_update(s); 303 strongarm_rtc_int_update(s); 304 } 305 306 static inline void strongarm_rtc_hz_tick(void *opaque) 307 { 308 StrongARMRTCState *s = opaque; 309 s->rtsr |= RTSR_HZ; 310 strongarm_rtc_timer_update(s); 311 strongarm_rtc_int_update(s); 312 } 313 314 static uint64_t strongarm_rtc_read(void *opaque, hwaddr addr, 315 unsigned size) 316 { 317 StrongARMRTCState *s = opaque; 318 319 switch (addr) { 320 case RTTR: 321 return s->rttr; 322 case RTSR: 323 return s->rtsr; 324 case RTAR: 325 return s->rtar; 326 case RCNR: 327 return s->last_rcnr + 328 ((qemu_clock_get_ms(rtc_clock) - s->last_hz) << 15) / 329 (1000 * ((s->rttr & 0xffff) + 1)); 330 default: 331 qemu_log_mask(LOG_GUEST_ERROR, 332 "%s: Bad rtc register read 0x"HWADDR_FMT_plx"\n", 333 __func__, addr); 334 return 0; 335 } 336 } 337 338 static void strongarm_rtc_write(void *opaque, hwaddr addr, 339 uint64_t value, unsigned size) 340 { 341 StrongARMRTCState *s = opaque; 342 uint32_t old_rtsr; 343 344 switch (addr) { 345 case RTTR: 346 strongarm_rtc_hzupdate(s); 347 s->rttr = value; 348 strongarm_rtc_timer_update(s); 349 break; 350 351 case RTSR: 352 old_rtsr = s->rtsr; 353 s->rtsr = (value & (RTSR_ALE | RTSR_HZE)) | 354 (s->rtsr & ~(value & (RTSR_AL | RTSR_HZ))); 355 356 if (s->rtsr != old_rtsr) { 357 strongarm_rtc_timer_update(s); 358 } 359 360 strongarm_rtc_int_update(s); 361 break; 362 363 case RTAR: 364 s->rtar = value; 365 strongarm_rtc_timer_update(s); 366 break; 367 368 case RCNR: 369 strongarm_rtc_hzupdate(s); 370 s->last_rcnr = value; 371 strongarm_rtc_timer_update(s); 372 break; 373 374 default: 375 qemu_log_mask(LOG_GUEST_ERROR, 376 "%s: Bad rtc register write 0x"HWADDR_FMT_plx"\n", 377 __func__, addr); 378 } 379 } 380 381 static const MemoryRegionOps strongarm_rtc_ops = { 382 .read = strongarm_rtc_read, 383 .write = strongarm_rtc_write, 384 .endianness = DEVICE_NATIVE_ENDIAN, 385 }; 386 387 static void strongarm_rtc_init(Object *obj) 388 { 389 StrongARMRTCState *s = STRONGARM_RTC(obj); 390 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 391 struct tm tm; 392 393 s->rttr = 0x0; 394 s->rtsr = 0; 395 396 qemu_get_timedate(&tm, 0); 397 398 s->last_rcnr = (uint32_t) mktimegm(&tm); 399 s->last_hz = qemu_clock_get_ms(rtc_clock); 400 401 sysbus_init_irq(dev, &s->rtc_irq); 402 sysbus_init_irq(dev, &s->rtc_hz_irq); 403 404 memory_region_init_io(&s->iomem, obj, &strongarm_rtc_ops, s, 405 "rtc", 0x10000); 406 sysbus_init_mmio(dev, &s->iomem); 407 } 408 409 static void strongarm_rtc_realize(DeviceState *dev, Error **errp) 410 { 411 StrongARMRTCState *s = STRONGARM_RTC(dev); 412 s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s); 413 s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s); 414 } 415 416 static int strongarm_rtc_pre_save(void *opaque) 417 { 418 StrongARMRTCState *s = opaque; 419 420 strongarm_rtc_hzupdate(s); 421 422 return 0; 423 } 424 425 static int strongarm_rtc_post_load(void *opaque, int version_id) 426 { 427 StrongARMRTCState *s = opaque; 428 429 strongarm_rtc_timer_update(s); 430 strongarm_rtc_int_update(s); 431 432 return 0; 433 } 434 435 static const VMStateDescription vmstate_strongarm_rtc_regs = { 436 .name = "strongarm-rtc", 437 .version_id = 0, 438 .minimum_version_id = 0, 439 .pre_save = strongarm_rtc_pre_save, 440 .post_load = strongarm_rtc_post_load, 441 .fields = (const VMStateField[]) { 442 VMSTATE_UINT32(rttr, StrongARMRTCState), 443 VMSTATE_UINT32(rtsr, StrongARMRTCState), 444 VMSTATE_UINT32(rtar, StrongARMRTCState), 445 VMSTATE_UINT32(last_rcnr, StrongARMRTCState), 446 VMSTATE_INT64(last_hz, StrongARMRTCState), 447 VMSTATE_END_OF_LIST(), 448 }, 449 }; 450 451 static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data) 452 { 453 DeviceClass *dc = DEVICE_CLASS(klass); 454 455 dc->desc = "StrongARM RTC Controller"; 456 dc->vmsd = &vmstate_strongarm_rtc_regs; 457 dc->realize = strongarm_rtc_realize; 458 } 459 460 static const TypeInfo strongarm_rtc_sysbus_info = { 461 .name = TYPE_STRONGARM_RTC, 462 .parent = TYPE_SYS_BUS_DEVICE, 463 .instance_size = sizeof(StrongARMRTCState), 464 .instance_init = strongarm_rtc_init, 465 .class_init = strongarm_rtc_sysbus_class_init, 466 }; 467 468 /* GPIO */ 469 #define GPLR 0x00 470 #define GPDR 0x04 471 #define GPSR 0x08 472 #define GPCR 0x0c 473 #define GRER 0x10 474 #define GFER 0x14 475 #define GEDR 0x18 476 #define GAFR 0x1c 477 478 #define TYPE_STRONGARM_GPIO "strongarm-gpio" 479 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMGPIOInfo, STRONGARM_GPIO) 480 481 struct StrongARMGPIOInfo { 482 SysBusDevice busdev; 483 MemoryRegion iomem; 484 qemu_irq handler[28]; 485 qemu_irq irqs[11]; 486 qemu_irq irqX; 487 488 uint32_t ilevel; 489 uint32_t olevel; 490 uint32_t dir; 491 uint32_t rising; 492 uint32_t falling; 493 uint32_t status; 494 uint32_t gafr; 495 496 uint32_t prev_level; 497 }; 498 499 500 static void strongarm_gpio_irq_update(StrongARMGPIOInfo *s) 501 { 502 int i; 503 for (i = 0; i < 11; i++) { 504 qemu_set_irq(s->irqs[i], s->status & (1 << i)); 505 } 506 507 qemu_set_irq(s->irqX, (s->status & ~0x7ff)); 508 } 509 510 static void strongarm_gpio_set(void *opaque, int line, int level) 511 { 512 StrongARMGPIOInfo *s = opaque; 513 uint32_t mask; 514 515 mask = 1 << line; 516 517 if (level) { 518 s->status |= s->rising & mask & 519 ~s->ilevel & ~s->dir; 520 s->ilevel |= mask; 521 } else { 522 s->status |= s->falling & mask & 523 s->ilevel & ~s->dir; 524 s->ilevel &= ~mask; 525 } 526 527 if (s->status & mask) { 528 strongarm_gpio_irq_update(s); 529 } 530 } 531 532 static void strongarm_gpio_handler_update(StrongARMGPIOInfo *s) 533 { 534 uint32_t level, diff; 535 int bit; 536 537 level = s->olevel & s->dir; 538 539 for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) { 540 bit = ctz32(diff); 541 qemu_set_irq(s->handler[bit], (level >> bit) & 1); 542 } 543 544 s->prev_level = level; 545 } 546 547 static uint64_t strongarm_gpio_read(void *opaque, hwaddr offset, 548 unsigned size) 549 { 550 StrongARMGPIOInfo *s = opaque; 551 552 switch (offset) { 553 case GPDR: /* GPIO Pin-Direction registers */ 554 return s->dir; 555 556 case GPSR: /* GPIO Pin-Output Set registers */ 557 qemu_log_mask(LOG_GUEST_ERROR, 558 "%s: read from write only register GPSR\n", __func__); 559 return 0; 560 561 case GPCR: /* GPIO Pin-Output Clear registers */ 562 qemu_log_mask(LOG_GUEST_ERROR, 563 "%s: read from write only register GPCR\n", __func__); 564 return 0; 565 566 case GRER: /* GPIO Rising-Edge Detect Enable registers */ 567 return s->rising; 568 569 case GFER: /* GPIO Falling-Edge Detect Enable registers */ 570 return s->falling; 571 572 case GAFR: /* GPIO Alternate Function registers */ 573 return s->gafr; 574 575 case GPLR: /* GPIO Pin-Level registers */ 576 return (s->olevel & s->dir) | 577 (s->ilevel & ~s->dir); 578 579 case GEDR: /* GPIO Edge Detect Status registers */ 580 return s->status; 581 582 default: 583 qemu_log_mask(LOG_GUEST_ERROR, 584 "%s: Bad gpio read offset 0x"HWADDR_FMT_plx"\n", 585 __func__, offset); 586 } 587 588 return 0; 589 } 590 591 static void strongarm_gpio_write(void *opaque, hwaddr offset, 592 uint64_t value, unsigned size) 593 { 594 StrongARMGPIOInfo *s = opaque; 595 596 switch (offset) { 597 case GPDR: /* GPIO Pin-Direction registers */ 598 s->dir = value & 0x0fffffff; 599 strongarm_gpio_handler_update(s); 600 break; 601 602 case GPSR: /* GPIO Pin-Output Set registers */ 603 s->olevel |= value & 0x0fffffff; 604 strongarm_gpio_handler_update(s); 605 break; 606 607 case GPCR: /* GPIO Pin-Output Clear registers */ 608 s->olevel &= ~value; 609 strongarm_gpio_handler_update(s); 610 break; 611 612 case GRER: /* GPIO Rising-Edge Detect Enable registers */ 613 s->rising = value; 614 break; 615 616 case GFER: /* GPIO Falling-Edge Detect Enable registers */ 617 s->falling = value; 618 break; 619 620 case GAFR: /* GPIO Alternate Function registers */ 621 s->gafr = value; 622 break; 623 624 case GEDR: /* GPIO Edge Detect Status registers */ 625 s->status &= ~value; 626 strongarm_gpio_irq_update(s); 627 break; 628 629 default: 630 qemu_log_mask(LOG_GUEST_ERROR, 631 "%s: Bad write offset 0x"HWADDR_FMT_plx"\n", 632 __func__, offset); 633 } 634 } 635 636 static const MemoryRegionOps strongarm_gpio_ops = { 637 .read = strongarm_gpio_read, 638 .write = strongarm_gpio_write, 639 .endianness = DEVICE_NATIVE_ENDIAN, 640 }; 641 642 static DeviceState *strongarm_gpio_init(hwaddr base, 643 DeviceState *pic) 644 { 645 DeviceState *dev; 646 int i; 647 648 dev = qdev_new(TYPE_STRONGARM_GPIO); 649 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 650 651 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 652 for (i = 0; i < 12; i++) 653 sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, 654 qdev_get_gpio_in(pic, SA_PIC_GPIO0_EDGE + i)); 655 656 return dev; 657 } 658 659 static void strongarm_gpio_initfn(Object *obj) 660 { 661 DeviceState *dev = DEVICE(obj); 662 StrongARMGPIOInfo *s = STRONGARM_GPIO(obj); 663 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 664 int i; 665 666 qdev_init_gpio_in(dev, strongarm_gpio_set, 28); 667 qdev_init_gpio_out(dev, s->handler, 28); 668 669 memory_region_init_io(&s->iomem, obj, &strongarm_gpio_ops, s, 670 "gpio", 0x1000); 671 672 sysbus_init_mmio(sbd, &s->iomem); 673 for (i = 0; i < 11; i++) { 674 sysbus_init_irq(sbd, &s->irqs[i]); 675 } 676 sysbus_init_irq(sbd, &s->irqX); 677 } 678 679 static const VMStateDescription vmstate_strongarm_gpio_regs = { 680 .name = "strongarm-gpio", 681 .version_id = 0, 682 .minimum_version_id = 0, 683 .fields = (const VMStateField[]) { 684 VMSTATE_UINT32(ilevel, StrongARMGPIOInfo), 685 VMSTATE_UINT32(olevel, StrongARMGPIOInfo), 686 VMSTATE_UINT32(dir, StrongARMGPIOInfo), 687 VMSTATE_UINT32(rising, StrongARMGPIOInfo), 688 VMSTATE_UINT32(falling, StrongARMGPIOInfo), 689 VMSTATE_UINT32(status, StrongARMGPIOInfo), 690 VMSTATE_UINT32(gafr, StrongARMGPIOInfo), 691 VMSTATE_UINT32(prev_level, StrongARMGPIOInfo), 692 VMSTATE_END_OF_LIST(), 693 }, 694 }; 695 696 static void strongarm_gpio_class_init(ObjectClass *klass, void *data) 697 { 698 DeviceClass *dc = DEVICE_CLASS(klass); 699 700 dc->desc = "StrongARM GPIO controller"; 701 dc->vmsd = &vmstate_strongarm_gpio_regs; 702 } 703 704 static const TypeInfo strongarm_gpio_info = { 705 .name = TYPE_STRONGARM_GPIO, 706 .parent = TYPE_SYS_BUS_DEVICE, 707 .instance_size = sizeof(StrongARMGPIOInfo), 708 .instance_init = strongarm_gpio_initfn, 709 .class_init = strongarm_gpio_class_init, 710 }; 711 712 /* Peripheral Pin Controller */ 713 #define PPDR 0x00 714 #define PPSR 0x04 715 #define PPAR 0x08 716 #define PSDR 0x0c 717 #define PPFR 0x10 718 719 #define TYPE_STRONGARM_PPC "strongarm-ppc" 720 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMPPCInfo, STRONGARM_PPC) 721 722 struct StrongARMPPCInfo { 723 SysBusDevice parent_obj; 724 725 MemoryRegion iomem; 726 qemu_irq handler[28]; 727 728 uint32_t ilevel; 729 uint32_t olevel; 730 uint32_t dir; 731 uint32_t ppar; 732 uint32_t psdr; 733 uint32_t ppfr; 734 735 uint32_t prev_level; 736 }; 737 738 static void strongarm_ppc_set(void *opaque, int line, int level) 739 { 740 StrongARMPPCInfo *s = opaque; 741 742 if (level) { 743 s->ilevel |= 1 << line; 744 } else { 745 s->ilevel &= ~(1 << line); 746 } 747 } 748 749 static void strongarm_ppc_handler_update(StrongARMPPCInfo *s) 750 { 751 uint32_t level, diff; 752 int bit; 753 754 level = s->olevel & s->dir; 755 756 for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) { 757 bit = ctz32(diff); 758 qemu_set_irq(s->handler[bit], (level >> bit) & 1); 759 } 760 761 s->prev_level = level; 762 } 763 764 static uint64_t strongarm_ppc_read(void *opaque, hwaddr offset, 765 unsigned size) 766 { 767 StrongARMPPCInfo *s = opaque; 768 769 switch (offset) { 770 case PPDR: /* PPC Pin Direction registers */ 771 return s->dir | ~0x3fffff; 772 773 case PPSR: /* PPC Pin State registers */ 774 return (s->olevel & s->dir) | 775 (s->ilevel & ~s->dir) | 776 ~0x3fffff; 777 778 case PPAR: 779 return s->ppar | ~0x41000; 780 781 case PSDR: 782 return s->psdr; 783 784 case PPFR: 785 return s->ppfr | ~0x7f001; 786 787 default: 788 qemu_log_mask(LOG_GUEST_ERROR, 789 "%s: Bad ppc read offset 0x"HWADDR_FMT_plx "\n", 790 __func__, offset); 791 } 792 793 return 0; 794 } 795 796 static void strongarm_ppc_write(void *opaque, hwaddr offset, 797 uint64_t value, unsigned size) 798 { 799 StrongARMPPCInfo *s = opaque; 800 801 switch (offset) { 802 case PPDR: /* PPC Pin Direction registers */ 803 s->dir = value & 0x3fffff; 804 strongarm_ppc_handler_update(s); 805 break; 806 807 case PPSR: /* PPC Pin State registers */ 808 s->olevel = value & s->dir & 0x3fffff; 809 strongarm_ppc_handler_update(s); 810 break; 811 812 case PPAR: 813 s->ppar = value & 0x41000; 814 break; 815 816 case PSDR: 817 s->psdr = value & 0x3fffff; 818 break; 819 820 case PPFR: 821 s->ppfr = value & 0x7f001; 822 break; 823 824 default: 825 qemu_log_mask(LOG_GUEST_ERROR, 826 "%s: Bad ppc write offset 0x"HWADDR_FMT_plx"\n", 827 __func__, offset); 828 } 829 } 830 831 static const MemoryRegionOps strongarm_ppc_ops = { 832 .read = strongarm_ppc_read, 833 .write = strongarm_ppc_write, 834 .endianness = DEVICE_NATIVE_ENDIAN, 835 }; 836 837 static void strongarm_ppc_init(Object *obj) 838 { 839 DeviceState *dev = DEVICE(obj); 840 StrongARMPPCInfo *s = STRONGARM_PPC(obj); 841 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 842 843 qdev_init_gpio_in(dev, strongarm_ppc_set, 22); 844 qdev_init_gpio_out(dev, s->handler, 22); 845 846 memory_region_init_io(&s->iomem, obj, &strongarm_ppc_ops, s, 847 "ppc", 0x1000); 848 849 sysbus_init_mmio(sbd, &s->iomem); 850 } 851 852 static const VMStateDescription vmstate_strongarm_ppc_regs = { 853 .name = "strongarm-ppc", 854 .version_id = 0, 855 .minimum_version_id = 0, 856 .fields = (const VMStateField[]) { 857 VMSTATE_UINT32(ilevel, StrongARMPPCInfo), 858 VMSTATE_UINT32(olevel, StrongARMPPCInfo), 859 VMSTATE_UINT32(dir, StrongARMPPCInfo), 860 VMSTATE_UINT32(ppar, StrongARMPPCInfo), 861 VMSTATE_UINT32(psdr, StrongARMPPCInfo), 862 VMSTATE_UINT32(ppfr, StrongARMPPCInfo), 863 VMSTATE_UINT32(prev_level, StrongARMPPCInfo), 864 VMSTATE_END_OF_LIST(), 865 }, 866 }; 867 868 static void strongarm_ppc_class_init(ObjectClass *klass, void *data) 869 { 870 DeviceClass *dc = DEVICE_CLASS(klass); 871 872 dc->desc = "StrongARM PPC controller"; 873 dc->vmsd = &vmstate_strongarm_ppc_regs; 874 } 875 876 static const TypeInfo strongarm_ppc_info = { 877 .name = TYPE_STRONGARM_PPC, 878 .parent = TYPE_SYS_BUS_DEVICE, 879 .instance_size = sizeof(StrongARMPPCInfo), 880 .instance_init = strongarm_ppc_init, 881 .class_init = strongarm_ppc_class_init, 882 }; 883 884 /* UART Ports */ 885 #define UTCR0 0x00 886 #define UTCR1 0x04 887 #define UTCR2 0x08 888 #define UTCR3 0x0c 889 #define UTDR 0x14 890 #define UTSR0 0x1c 891 #define UTSR1 0x20 892 893 #define UTCR0_PE (1 << 0) /* Parity enable */ 894 #define UTCR0_OES (1 << 1) /* Even parity */ 895 #define UTCR0_SBS (1 << 2) /* 2 stop bits */ 896 #define UTCR0_DSS (1 << 3) /* 8-bit data */ 897 898 #define UTCR3_RXE (1 << 0) /* Rx enable */ 899 #define UTCR3_TXE (1 << 1) /* Tx enable */ 900 #define UTCR3_BRK (1 << 2) /* Force Break */ 901 #define UTCR3_RIE (1 << 3) /* Rx int enable */ 902 #define UTCR3_TIE (1 << 4) /* Tx int enable */ 903 #define UTCR3_LBM (1 << 5) /* Loopback */ 904 905 #define UTSR0_TFS (1 << 0) /* Tx FIFO nearly empty */ 906 #define UTSR0_RFS (1 << 1) /* Rx FIFO nearly full */ 907 #define UTSR0_RID (1 << 2) /* Receiver Idle */ 908 #define UTSR0_RBB (1 << 3) /* Receiver begin break */ 909 #define UTSR0_REB (1 << 4) /* Receiver end break */ 910 #define UTSR0_EIF (1 << 5) /* Error in FIFO */ 911 912 #define UTSR1_RNE (1 << 1) /* Receive FIFO not empty */ 913 #define UTSR1_TNF (1 << 2) /* Transmit FIFO not full */ 914 #define UTSR1_PRE (1 << 3) /* Parity error */ 915 #define UTSR1_FRE (1 << 4) /* Frame error */ 916 #define UTSR1_ROR (1 << 5) /* Receive Over Run */ 917 918 #define RX_FIFO_PRE (1 << 8) 919 #define RX_FIFO_FRE (1 << 9) 920 #define RX_FIFO_ROR (1 << 10) 921 922 #define TYPE_STRONGARM_UART "strongarm-uart" 923 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMUARTState, STRONGARM_UART) 924 925 struct StrongARMUARTState { 926 SysBusDevice parent_obj; 927 928 MemoryRegion iomem; 929 CharBackend chr; 930 qemu_irq irq; 931 932 uint8_t utcr0; 933 uint16_t brd; 934 uint8_t utcr3; 935 uint8_t utsr0; 936 uint8_t utsr1; 937 938 uint8_t tx_fifo[8]; 939 uint8_t tx_start; 940 uint8_t tx_len; 941 uint16_t rx_fifo[12]; /* value + error flags in high bits */ 942 uint8_t rx_start; 943 uint8_t rx_len; 944 945 uint64_t char_transmit_time; /* time to transmit a char in nanoseconds */ 946 bool wait_break_end; 947 QEMUTimer *rx_timeout_timer; 948 QEMUTimer *tx_timer; 949 }; 950 951 static void strongarm_uart_update_status(StrongARMUARTState *s) 952 { 953 uint16_t utsr1 = 0; 954 955 if (s->tx_len != 8) { 956 utsr1 |= UTSR1_TNF; 957 } 958 959 if (s->rx_len != 0) { 960 uint16_t ent = s->rx_fifo[s->rx_start]; 961 962 utsr1 |= UTSR1_RNE; 963 if (ent & RX_FIFO_PRE) { 964 s->utsr1 |= UTSR1_PRE; 965 } 966 if (ent & RX_FIFO_FRE) { 967 s->utsr1 |= UTSR1_FRE; 968 } 969 if (ent & RX_FIFO_ROR) { 970 s->utsr1 |= UTSR1_ROR; 971 } 972 } 973 974 s->utsr1 = utsr1; 975 } 976 977 static void strongarm_uart_update_int_status(StrongARMUARTState *s) 978 { 979 uint16_t utsr0 = s->utsr0 & 980 (UTSR0_REB | UTSR0_RBB | UTSR0_RID); 981 int i; 982 983 if ((s->utcr3 & UTCR3_TXE) && 984 (s->utcr3 & UTCR3_TIE) && 985 s->tx_len <= 4) { 986 utsr0 |= UTSR0_TFS; 987 } 988 989 if ((s->utcr3 & UTCR3_RXE) && 990 (s->utcr3 & UTCR3_RIE) && 991 s->rx_len > 4) { 992 utsr0 |= UTSR0_RFS; 993 } 994 995 for (i = 0; i < s->rx_len && i < 4; i++) 996 if (s->rx_fifo[(s->rx_start + i) % 12] & ~0xff) { 997 utsr0 |= UTSR0_EIF; 998 break; 999 } 1000 1001 s->utsr0 = utsr0; 1002 qemu_set_irq(s->irq, utsr0); 1003 } 1004 1005 static void strongarm_uart_update_parameters(StrongARMUARTState *s) 1006 { 1007 int speed, parity, data_bits, stop_bits, frame_size; 1008 QEMUSerialSetParams ssp; 1009 1010 /* Start bit. */ 1011 frame_size = 1; 1012 if (s->utcr0 & UTCR0_PE) { 1013 /* Parity bit. */ 1014 frame_size++; 1015 if (s->utcr0 & UTCR0_OES) { 1016 parity = 'E'; 1017 } else { 1018 parity = 'O'; 1019 } 1020 } else { 1021 parity = 'N'; 1022 } 1023 if (s->utcr0 & UTCR0_SBS) { 1024 stop_bits = 2; 1025 } else { 1026 stop_bits = 1; 1027 } 1028 1029 data_bits = (s->utcr0 & UTCR0_DSS) ? 8 : 7; 1030 frame_size += data_bits + stop_bits; 1031 speed = 3686400 / 16 / (s->brd + 1); 1032 ssp.speed = speed; 1033 ssp.parity = parity; 1034 ssp.data_bits = data_bits; 1035 ssp.stop_bits = stop_bits; 1036 s->char_transmit_time = (NANOSECONDS_PER_SECOND / speed) * frame_size; 1037 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 1038 1039 trace_strongarm_uart_update_parameters((s->chr.chr ? 1040 s->chr.chr->label : "NULL") ?: 1041 "NULL", 1042 speed, 1043 parity, 1044 data_bits, 1045 stop_bits); 1046 } 1047 1048 static void strongarm_uart_rx_to(void *opaque) 1049 { 1050 StrongARMUARTState *s = opaque; 1051 1052 if (s->rx_len) { 1053 s->utsr0 |= UTSR0_RID; 1054 strongarm_uart_update_int_status(s); 1055 } 1056 } 1057 1058 static void strongarm_uart_rx_push(StrongARMUARTState *s, uint16_t c) 1059 { 1060 if ((s->utcr3 & UTCR3_RXE) == 0) { 1061 /* rx disabled */ 1062 return; 1063 } 1064 1065 if (s->wait_break_end) { 1066 s->utsr0 |= UTSR0_REB; 1067 s->wait_break_end = false; 1068 } 1069 1070 if (s->rx_len < 12) { 1071 s->rx_fifo[(s->rx_start + s->rx_len) % 12] = c; 1072 s->rx_len++; 1073 } else 1074 s->rx_fifo[(s->rx_start + 11) % 12] |= RX_FIFO_ROR; 1075 } 1076 1077 static int strongarm_uart_can_receive(void *opaque) 1078 { 1079 StrongARMUARTState *s = opaque; 1080 1081 if (s->rx_len == 12) { 1082 return 0; 1083 } 1084 /* It's best not to get more than 2/3 of RX FIFO, so advertise that much */ 1085 if (s->rx_len < 8) { 1086 return 8 - s->rx_len; 1087 } 1088 return 1; 1089 } 1090 1091 static void strongarm_uart_receive(void *opaque, const uint8_t *buf, int size) 1092 { 1093 StrongARMUARTState *s = opaque; 1094 int i; 1095 1096 for (i = 0; i < size; i++) { 1097 strongarm_uart_rx_push(s, buf[i]); 1098 } 1099 1100 /* call the timeout receive callback in 3 char transmit time */ 1101 timer_mod(s->rx_timeout_timer, 1102 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3); 1103 1104 strongarm_uart_update_status(s); 1105 strongarm_uart_update_int_status(s); 1106 } 1107 1108 static void strongarm_uart_event(void *opaque, QEMUChrEvent event) 1109 { 1110 StrongARMUARTState *s = opaque; 1111 if (event == CHR_EVENT_BREAK) { 1112 s->utsr0 |= UTSR0_RBB; 1113 strongarm_uart_rx_push(s, RX_FIFO_FRE); 1114 s->wait_break_end = true; 1115 strongarm_uart_update_status(s); 1116 strongarm_uart_update_int_status(s); 1117 } 1118 } 1119 1120 static void strongarm_uart_tx(void *opaque) 1121 { 1122 StrongARMUARTState *s = opaque; 1123 uint64_t new_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 1124 1125 if (s->utcr3 & UTCR3_LBM) /* loopback */ { 1126 strongarm_uart_receive(s, &s->tx_fifo[s->tx_start], 1); 1127 } else if (qemu_chr_fe_backend_connected(&s->chr)) { 1128 /* XXX this blocks entire thread. Rewrite to use 1129 * qemu_chr_fe_write and background I/O callbacks */ 1130 qemu_chr_fe_write_all(&s->chr, &s->tx_fifo[s->tx_start], 1); 1131 } 1132 1133 s->tx_start = (s->tx_start + 1) % 8; 1134 s->tx_len--; 1135 if (s->tx_len) { 1136 timer_mod(s->tx_timer, new_xmit_ts + s->char_transmit_time); 1137 } 1138 strongarm_uart_update_status(s); 1139 strongarm_uart_update_int_status(s); 1140 } 1141 1142 static uint64_t strongarm_uart_read(void *opaque, hwaddr addr, 1143 unsigned size) 1144 { 1145 StrongARMUARTState *s = opaque; 1146 uint16_t ret; 1147 1148 switch (addr) { 1149 case UTCR0: 1150 return s->utcr0; 1151 1152 case UTCR1: 1153 return s->brd >> 8; 1154 1155 case UTCR2: 1156 return s->brd & 0xff; 1157 1158 case UTCR3: 1159 return s->utcr3; 1160 1161 case UTDR: 1162 if (s->rx_len != 0) { 1163 ret = s->rx_fifo[s->rx_start]; 1164 s->rx_start = (s->rx_start + 1) % 12; 1165 s->rx_len--; 1166 strongarm_uart_update_status(s); 1167 strongarm_uart_update_int_status(s); 1168 return ret; 1169 } 1170 return 0; 1171 1172 case UTSR0: 1173 return s->utsr0; 1174 1175 case UTSR1: 1176 return s->utsr1; 1177 1178 default: 1179 qemu_log_mask(LOG_GUEST_ERROR, 1180 "%s: Bad uart register read 0x"HWADDR_FMT_plx"\n", 1181 __func__, addr); 1182 return 0; 1183 } 1184 } 1185 1186 static void strongarm_uart_write(void *opaque, hwaddr addr, 1187 uint64_t value, unsigned size) 1188 { 1189 StrongARMUARTState *s = opaque; 1190 1191 switch (addr) { 1192 case UTCR0: 1193 s->utcr0 = value & 0x7f; 1194 strongarm_uart_update_parameters(s); 1195 break; 1196 1197 case UTCR1: 1198 s->brd = (s->brd & 0xff) | ((value & 0xf) << 8); 1199 strongarm_uart_update_parameters(s); 1200 break; 1201 1202 case UTCR2: 1203 s->brd = (s->brd & 0xf00) | (value & 0xff); 1204 strongarm_uart_update_parameters(s); 1205 break; 1206 1207 case UTCR3: 1208 s->utcr3 = value & 0x3f; 1209 if ((s->utcr3 & UTCR3_RXE) == 0) { 1210 s->rx_len = 0; 1211 } 1212 if ((s->utcr3 & UTCR3_TXE) == 0) { 1213 s->tx_len = 0; 1214 } 1215 strongarm_uart_update_status(s); 1216 strongarm_uart_update_int_status(s); 1217 break; 1218 1219 case UTDR: 1220 if ((s->utcr3 & UTCR3_TXE) && s->tx_len != 8) { 1221 s->tx_fifo[(s->tx_start + s->tx_len) % 8] = value; 1222 s->tx_len++; 1223 strongarm_uart_update_status(s); 1224 strongarm_uart_update_int_status(s); 1225 if (s->tx_len == 1) { 1226 strongarm_uart_tx(s); 1227 } 1228 } 1229 break; 1230 1231 case UTSR0: 1232 s->utsr0 = s->utsr0 & ~(value & 1233 (UTSR0_REB | UTSR0_RBB | UTSR0_RID)); 1234 strongarm_uart_update_int_status(s); 1235 break; 1236 1237 default: 1238 qemu_log_mask(LOG_GUEST_ERROR, 1239 "%s: Bad uart register write 0x"HWADDR_FMT_plx"\n", 1240 __func__, addr); 1241 } 1242 } 1243 1244 static const MemoryRegionOps strongarm_uart_ops = { 1245 .read = strongarm_uart_read, 1246 .write = strongarm_uart_write, 1247 .endianness = DEVICE_NATIVE_ENDIAN, 1248 }; 1249 1250 static void strongarm_uart_init(Object *obj) 1251 { 1252 StrongARMUARTState *s = STRONGARM_UART(obj); 1253 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 1254 1255 memory_region_init_io(&s->iomem, obj, &strongarm_uart_ops, s, 1256 "uart", 0x10000); 1257 sysbus_init_mmio(dev, &s->iomem); 1258 sysbus_init_irq(dev, &s->irq); 1259 } 1260 1261 static void strongarm_uart_realize(DeviceState *dev, Error **errp) 1262 { 1263 StrongARMUARTState *s = STRONGARM_UART(dev); 1264 1265 s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, 1266 strongarm_uart_rx_to, 1267 s); 1268 s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s); 1269 qemu_chr_fe_set_handlers(&s->chr, 1270 strongarm_uart_can_receive, 1271 strongarm_uart_receive, 1272 strongarm_uart_event, 1273 NULL, s, NULL, true); 1274 } 1275 1276 static void strongarm_uart_reset(DeviceState *dev) 1277 { 1278 StrongARMUARTState *s = STRONGARM_UART(dev); 1279 1280 s->utcr0 = UTCR0_DSS; /* 8 data, no parity */ 1281 s->brd = 23; /* 9600 */ 1282 /* enable send & recv - this actually violates spec */ 1283 s->utcr3 = UTCR3_TXE | UTCR3_RXE; 1284 1285 s->rx_len = s->tx_len = 0; 1286 1287 strongarm_uart_update_parameters(s); 1288 strongarm_uart_update_status(s); 1289 strongarm_uart_update_int_status(s); 1290 } 1291 1292 static int strongarm_uart_post_load(void *opaque, int version_id) 1293 { 1294 StrongARMUARTState *s = opaque; 1295 1296 strongarm_uart_update_parameters(s); 1297 strongarm_uart_update_status(s); 1298 strongarm_uart_update_int_status(s); 1299 1300 /* tx and restart timer */ 1301 if (s->tx_len) { 1302 strongarm_uart_tx(s); 1303 } 1304 1305 /* restart rx timeout timer */ 1306 if (s->rx_len) { 1307 timer_mod(s->rx_timeout_timer, 1308 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3); 1309 } 1310 1311 return 0; 1312 } 1313 1314 static const VMStateDescription vmstate_strongarm_uart_regs = { 1315 .name = "strongarm-uart", 1316 .version_id = 0, 1317 .minimum_version_id = 0, 1318 .post_load = strongarm_uart_post_load, 1319 .fields = (const VMStateField[]) { 1320 VMSTATE_UINT8(utcr0, StrongARMUARTState), 1321 VMSTATE_UINT16(brd, StrongARMUARTState), 1322 VMSTATE_UINT8(utcr3, StrongARMUARTState), 1323 VMSTATE_UINT8(utsr0, StrongARMUARTState), 1324 VMSTATE_UINT8_ARRAY(tx_fifo, StrongARMUARTState, 8), 1325 VMSTATE_UINT8(tx_start, StrongARMUARTState), 1326 VMSTATE_UINT8(tx_len, StrongARMUARTState), 1327 VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMUARTState, 12), 1328 VMSTATE_UINT8(rx_start, StrongARMUARTState), 1329 VMSTATE_UINT8(rx_len, StrongARMUARTState), 1330 VMSTATE_BOOL(wait_break_end, StrongARMUARTState), 1331 VMSTATE_END_OF_LIST(), 1332 }, 1333 }; 1334 1335 static Property strongarm_uart_properties[] = { 1336 DEFINE_PROP_CHR("chardev", StrongARMUARTState, chr), 1337 DEFINE_PROP_END_OF_LIST(), 1338 }; 1339 1340 static void strongarm_uart_class_init(ObjectClass *klass, void *data) 1341 { 1342 DeviceClass *dc = DEVICE_CLASS(klass); 1343 1344 dc->desc = "StrongARM UART controller"; 1345 dc->reset = strongarm_uart_reset; 1346 dc->vmsd = &vmstate_strongarm_uart_regs; 1347 device_class_set_props(dc, strongarm_uart_properties); 1348 dc->realize = strongarm_uart_realize; 1349 } 1350 1351 static const TypeInfo strongarm_uart_info = { 1352 .name = TYPE_STRONGARM_UART, 1353 .parent = TYPE_SYS_BUS_DEVICE, 1354 .instance_size = sizeof(StrongARMUARTState), 1355 .instance_init = strongarm_uart_init, 1356 .class_init = strongarm_uart_class_init, 1357 }; 1358 1359 /* Synchronous Serial Ports */ 1360 1361 #define TYPE_STRONGARM_SSP "strongarm-ssp" 1362 OBJECT_DECLARE_SIMPLE_TYPE(StrongARMSSPState, STRONGARM_SSP) 1363 1364 struct StrongARMSSPState { 1365 SysBusDevice parent_obj; 1366 1367 MemoryRegion iomem; 1368 qemu_irq irq; 1369 SSIBus *bus; 1370 1371 uint16_t sscr[2]; 1372 uint16_t sssr; 1373 1374 uint16_t rx_fifo[8]; 1375 uint8_t rx_level; 1376 uint8_t rx_start; 1377 }; 1378 1379 #define SSCR0 0x60 /* SSP Control register 0 */ 1380 #define SSCR1 0x64 /* SSP Control register 1 */ 1381 #define SSDR 0x6c /* SSP Data register */ 1382 #define SSSR 0x74 /* SSP Status register */ 1383 1384 /* Bitfields for above registers */ 1385 #define SSCR0_SPI(x) (((x) & 0x30) == 0x00) 1386 #define SSCR0_SSP(x) (((x) & 0x30) == 0x10) 1387 #define SSCR0_UWIRE(x) (((x) & 0x30) == 0x20) 1388 #define SSCR0_PSP(x) (((x) & 0x30) == 0x30) 1389 #define SSCR0_SSE (1 << 7) 1390 #define SSCR0_DSS(x) (((x) & 0xf) + 1) 1391 #define SSCR1_RIE (1 << 0) 1392 #define SSCR1_TIE (1 << 1) 1393 #define SSCR1_LBM (1 << 2) 1394 #define SSSR_TNF (1 << 2) 1395 #define SSSR_RNE (1 << 3) 1396 #define SSSR_TFS (1 << 5) 1397 #define SSSR_RFS (1 << 6) 1398 #define SSSR_ROR (1 << 7) 1399 #define SSSR_RW 0x0080 1400 1401 static void strongarm_ssp_int_update(StrongARMSSPState *s) 1402 { 1403 int level = 0; 1404 1405 level |= (s->sssr & SSSR_ROR); 1406 level |= (s->sssr & SSSR_RFS) && (s->sscr[1] & SSCR1_RIE); 1407 level |= (s->sssr & SSSR_TFS) && (s->sscr[1] & SSCR1_TIE); 1408 qemu_set_irq(s->irq, level); 1409 } 1410 1411 static void strongarm_ssp_fifo_update(StrongARMSSPState *s) 1412 { 1413 s->sssr &= ~SSSR_TFS; 1414 s->sssr &= ~SSSR_TNF; 1415 if (s->sscr[0] & SSCR0_SSE) { 1416 if (s->rx_level >= 4) { 1417 s->sssr |= SSSR_RFS; 1418 } else { 1419 s->sssr &= ~SSSR_RFS; 1420 } 1421 if (s->rx_level) { 1422 s->sssr |= SSSR_RNE; 1423 } else { 1424 s->sssr &= ~SSSR_RNE; 1425 } 1426 /* TX FIFO is never filled, so it is always in underrun 1427 condition if SSP is enabled */ 1428 s->sssr |= SSSR_TFS; 1429 s->sssr |= SSSR_TNF; 1430 } 1431 1432 strongarm_ssp_int_update(s); 1433 } 1434 1435 static uint64_t strongarm_ssp_read(void *opaque, hwaddr addr, 1436 unsigned size) 1437 { 1438 StrongARMSSPState *s = opaque; 1439 uint32_t retval; 1440 1441 switch (addr) { 1442 case SSCR0: 1443 return s->sscr[0]; 1444 case SSCR1: 1445 return s->sscr[1]; 1446 case SSSR: 1447 return s->sssr; 1448 case SSDR: 1449 if (~s->sscr[0] & SSCR0_SSE) { 1450 return 0xffffffff; 1451 } 1452 if (s->rx_level < 1) { 1453 trace_strongarm_ssp_read_underrun(); 1454 return 0xffffffff; 1455 } 1456 s->rx_level--; 1457 retval = s->rx_fifo[s->rx_start++]; 1458 s->rx_start &= 0x7; 1459 strongarm_ssp_fifo_update(s); 1460 return retval; 1461 default: 1462 qemu_log_mask(LOG_GUEST_ERROR, 1463 "%s: Bad ssp register read 0x"HWADDR_FMT_plx"\n", 1464 __func__, addr); 1465 break; 1466 } 1467 return 0; 1468 } 1469 1470 static void strongarm_ssp_write(void *opaque, hwaddr addr, 1471 uint64_t value, unsigned size) 1472 { 1473 StrongARMSSPState *s = opaque; 1474 1475 switch (addr) { 1476 case SSCR0: 1477 s->sscr[0] = value & 0xffbf; 1478 if ((s->sscr[0] & SSCR0_SSE) && SSCR0_DSS(value) < 4) { 1479 qemu_log_mask(LOG_GUEST_ERROR, "%s: Wrong data size: %i bits\n", 1480 __func__, (int)SSCR0_DSS(value)); 1481 } 1482 if (!(value & SSCR0_SSE)) { 1483 s->sssr = 0; 1484 s->rx_level = 0; 1485 } 1486 strongarm_ssp_fifo_update(s); 1487 break; 1488 1489 case SSCR1: 1490 s->sscr[1] = value & 0x2f; 1491 if (value & SSCR1_LBM) { 1492 qemu_log_mask(LOG_GUEST_ERROR, 1493 "%s: Attempt to use SSP LBM mode\n", 1494 __func__); 1495 } 1496 strongarm_ssp_fifo_update(s); 1497 break; 1498 1499 case SSSR: 1500 s->sssr &= ~(value & SSSR_RW); 1501 strongarm_ssp_int_update(s); 1502 break; 1503 1504 case SSDR: 1505 if (SSCR0_UWIRE(s->sscr[0])) { 1506 value &= 0xff; 1507 } else 1508 /* Note how 32bits overflow does no harm here */ 1509 value &= (1 << SSCR0_DSS(s->sscr[0])) - 1; 1510 1511 /* Data goes from here to the Tx FIFO and is shifted out from 1512 * there directly to the slave, no need to buffer it. 1513 */ 1514 if (s->sscr[0] & SSCR0_SSE) { 1515 uint32_t readval; 1516 if (s->sscr[1] & SSCR1_LBM) { 1517 readval = value; 1518 } else { 1519 readval = ssi_transfer(s->bus, value); 1520 } 1521 1522 if (s->rx_level < 0x08) { 1523 s->rx_fifo[(s->rx_start + s->rx_level++) & 0x7] = readval; 1524 } else { 1525 s->sssr |= SSSR_ROR; 1526 } 1527 } 1528 strongarm_ssp_fifo_update(s); 1529 break; 1530 1531 default: 1532 qemu_log_mask(LOG_GUEST_ERROR, 1533 "%s: Bad ssp register write 0x"HWADDR_FMT_plx"\n", 1534 __func__, addr); 1535 break; 1536 } 1537 } 1538 1539 static const MemoryRegionOps strongarm_ssp_ops = { 1540 .read = strongarm_ssp_read, 1541 .write = strongarm_ssp_write, 1542 .endianness = DEVICE_NATIVE_ENDIAN, 1543 }; 1544 1545 static int strongarm_ssp_post_load(void *opaque, int version_id) 1546 { 1547 StrongARMSSPState *s = opaque; 1548 1549 strongarm_ssp_fifo_update(s); 1550 1551 return 0; 1552 } 1553 1554 static void strongarm_ssp_init(Object *obj) 1555 { 1556 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 1557 DeviceState *dev = DEVICE(sbd); 1558 StrongARMSSPState *s = STRONGARM_SSP(dev); 1559 1560 sysbus_init_irq(sbd, &s->irq); 1561 1562 memory_region_init_io(&s->iomem, obj, &strongarm_ssp_ops, s, 1563 "ssp", 0x1000); 1564 sysbus_init_mmio(sbd, &s->iomem); 1565 1566 s->bus = ssi_create_bus(dev, "ssi"); 1567 } 1568 1569 static void strongarm_ssp_reset(DeviceState *dev) 1570 { 1571 StrongARMSSPState *s = STRONGARM_SSP(dev); 1572 1573 s->sssr = 0x03; /* 3 bit data, SPI, disabled */ 1574 s->rx_start = 0; 1575 s->rx_level = 0; 1576 } 1577 1578 static const VMStateDescription vmstate_strongarm_ssp_regs = { 1579 .name = "strongarm-ssp", 1580 .version_id = 0, 1581 .minimum_version_id = 0, 1582 .post_load = strongarm_ssp_post_load, 1583 .fields = (const VMStateField[]) { 1584 VMSTATE_UINT16_ARRAY(sscr, StrongARMSSPState, 2), 1585 VMSTATE_UINT16(sssr, StrongARMSSPState), 1586 VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMSSPState, 8), 1587 VMSTATE_UINT8(rx_start, StrongARMSSPState), 1588 VMSTATE_UINT8(rx_level, StrongARMSSPState), 1589 VMSTATE_END_OF_LIST(), 1590 }, 1591 }; 1592 1593 static void strongarm_ssp_class_init(ObjectClass *klass, void *data) 1594 { 1595 DeviceClass *dc = DEVICE_CLASS(klass); 1596 1597 dc->desc = "StrongARM SSP controller"; 1598 dc->reset = strongarm_ssp_reset; 1599 dc->vmsd = &vmstate_strongarm_ssp_regs; 1600 } 1601 1602 static const TypeInfo strongarm_ssp_info = { 1603 .name = TYPE_STRONGARM_SSP, 1604 .parent = TYPE_SYS_BUS_DEVICE, 1605 .instance_size = sizeof(StrongARMSSPState), 1606 .instance_init = strongarm_ssp_init, 1607 .class_init = strongarm_ssp_class_init, 1608 }; 1609 1610 /* Main CPU functions */ 1611 StrongARMState *sa1110_init(const char *cpu_type) 1612 { 1613 StrongARMState *s; 1614 int i; 1615 1616 s = g_new0(StrongARMState, 1); 1617 1618 if (strncmp(cpu_type, "sa1110", 6)) { 1619 error_report("Machine requires a SA1110 processor."); 1620 exit(1); 1621 } 1622 1623 s->cpu = ARM_CPU(cpu_create(cpu_type)); 1624 1625 s->pic = sysbus_create_varargs("strongarm_pic", 0x90050000, 1626 qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ), 1627 qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ), 1628 NULL); 1629 1630 sysbus_create_varargs("pxa25x-timer", 0x90000000, 1631 qdev_get_gpio_in(s->pic, SA_PIC_OSTC0), 1632 qdev_get_gpio_in(s->pic, SA_PIC_OSTC1), 1633 qdev_get_gpio_in(s->pic, SA_PIC_OSTC2), 1634 qdev_get_gpio_in(s->pic, SA_PIC_OSTC3), 1635 NULL); 1636 1637 sysbus_create_simple(TYPE_STRONGARM_RTC, 0x90010000, 1638 qdev_get_gpio_in(s->pic, SA_PIC_RTC_ALARM)); 1639 1640 s->gpio = strongarm_gpio_init(0x90040000, s->pic); 1641 1642 s->ppc = sysbus_create_varargs(TYPE_STRONGARM_PPC, 0x90060000, NULL); 1643 1644 for (i = 0; sa_serial[i].io_base; i++) { 1645 DeviceState *dev = qdev_new(TYPE_STRONGARM_UART); 1646 qdev_prop_set_chr(dev, "chardev", serial_hd(i)); 1647 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 1648 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 1649 sa_serial[i].io_base); 1650 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, 1651 qdev_get_gpio_in(s->pic, sa_serial[i].irq)); 1652 } 1653 1654 s->ssp = sysbus_create_varargs(TYPE_STRONGARM_SSP, 0x80070000, 1655 qdev_get_gpio_in(s->pic, SA_PIC_SSP), NULL); 1656 s->ssp_bus = (SSIBus *)qdev_get_child_bus(s->ssp, "ssi"); 1657 1658 return s; 1659 } 1660 1661 static void strongarm_register_types(void) 1662 { 1663 type_register_static(&strongarm_pic_info); 1664 type_register_static(&strongarm_rtc_sysbus_info); 1665 type_register_static(&strongarm_gpio_info); 1666 type_register_static(&strongarm_ppc_info); 1667 type_register_static(&strongarm_uart_info); 1668 type_register_static(&strongarm_ssp_info); 1669 } 1670 1671 type_init(strongarm_register_types) 1672