1 /* 2 * PXA270-based Clamshell PDA platforms. 3 * 4 * Copyright (c) 2006 Openedhand Ltd. 5 * Written by Andrzej Zaborowski <balrog@zabor.org> 6 * 7 * This code is licensed under the GNU GPL v2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "hw/hw.h" 14 #include "hw/arm/pxa.h" 15 #include "hw/arm/arm.h" 16 #include "sysemu/sysemu.h" 17 #include "hw/pcmcia.h" 18 #include "hw/i2c/i2c.h" 19 #include "hw/ssi.h" 20 #include "hw/block/flash.h" 21 #include "qemu/timer.h" 22 #include "hw/devices.h" 23 #include "hw/arm/sharpsl.h" 24 #include "ui/console.h" 25 #include "block/block.h" 26 #include "audio/audio.h" 27 #include "hw/boards.h" 28 #include "sysemu/blockdev.h" 29 #include "hw/sysbus.h" 30 #include "exec/address-spaces.h" 31 32 #undef REG_FMT 33 #define REG_FMT "0x%02lx" 34 35 /* Spitz Flash */ 36 #define FLASH_BASE 0x0c000000 37 #define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ 38 #define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ 39 #define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ 40 #define FLASH_ECCCNTR 0x0c /* ECC byte counter */ 41 #define FLASH_ECCCLRR 0x10 /* Clear ECC */ 42 #define FLASH_FLASHIO 0x14 /* Flash I/O */ 43 #define FLASH_FLASHCTL 0x18 /* Flash Control */ 44 45 #define FLASHCTL_CE0 (1 << 0) 46 #define FLASHCTL_CLE (1 << 1) 47 #define FLASHCTL_ALE (1 << 2) 48 #define FLASHCTL_WP (1 << 3) 49 #define FLASHCTL_CE1 (1 << 4) 50 #define FLASHCTL_RYBY (1 << 5) 51 #define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) 52 53 #define TYPE_SL_NAND "sl-nand" 54 #define SL_NAND(obj) OBJECT_CHECK(SLNANDState, (obj), TYPE_SL_NAND) 55 56 typedef struct { 57 SysBusDevice parent_obj; 58 59 MemoryRegion iomem; 60 DeviceState *nand; 61 uint8_t ctl; 62 uint8_t manf_id; 63 uint8_t chip_id; 64 ECCState ecc; 65 } SLNANDState; 66 67 static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) 68 { 69 SLNANDState *s = (SLNANDState *) opaque; 70 int ryby; 71 72 switch (addr) { 73 #define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) 74 case FLASH_ECCLPLB: 75 return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) | 76 BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7); 77 78 #define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) 79 case FLASH_ECCLPUB: 80 return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) | 81 BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7); 82 83 case FLASH_ECCCP: 84 return s->ecc.cp; 85 86 case FLASH_ECCCNTR: 87 return s->ecc.count & 0xff; 88 89 case FLASH_FLASHCTL: 90 nand_getpins(s->nand, &ryby); 91 if (ryby) 92 return s->ctl | FLASHCTL_RYBY; 93 else 94 return s->ctl; 95 96 case FLASH_FLASHIO: 97 if (size == 4) { 98 return ecc_digest(&s->ecc, nand_getio(s->nand)) | 99 (ecc_digest(&s->ecc, nand_getio(s->nand)) << 16); 100 } 101 return ecc_digest(&s->ecc, nand_getio(s->nand)); 102 103 default: 104 zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); 105 } 106 return 0; 107 } 108 109 static void sl_write(void *opaque, hwaddr addr, 110 uint64_t value, unsigned size) 111 { 112 SLNANDState *s = (SLNANDState *) opaque; 113 114 switch (addr) { 115 case FLASH_ECCCLRR: 116 /* Value is ignored. */ 117 ecc_reset(&s->ecc); 118 break; 119 120 case FLASH_FLASHCTL: 121 s->ctl = value & 0xff & ~FLASHCTL_RYBY; 122 nand_setpins(s->nand, 123 s->ctl & FLASHCTL_CLE, 124 s->ctl & FLASHCTL_ALE, 125 s->ctl & FLASHCTL_NCE, 126 s->ctl & FLASHCTL_WP, 127 0); 128 break; 129 130 case FLASH_FLASHIO: 131 nand_setio(s->nand, ecc_digest(&s->ecc, value & 0xff)); 132 break; 133 134 default: 135 zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); 136 } 137 } 138 139 enum { 140 FLASH_128M, 141 FLASH_1024M, 142 }; 143 144 static const MemoryRegionOps sl_ops = { 145 .read = sl_read, 146 .write = sl_write, 147 .endianness = DEVICE_NATIVE_ENDIAN, 148 }; 149 150 static void sl_flash_register(PXA2xxState *cpu, int size) 151 { 152 DeviceState *dev; 153 154 dev = qdev_create(NULL, TYPE_SL_NAND); 155 156 qdev_prop_set_uint8(dev, "manf_id", NAND_MFR_SAMSUNG); 157 if (size == FLASH_128M) 158 qdev_prop_set_uint8(dev, "chip_id", 0x73); 159 else if (size == FLASH_1024M) 160 qdev_prop_set_uint8(dev, "chip_id", 0xf1); 161 162 qdev_init_nofail(dev); 163 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, FLASH_BASE); 164 } 165 166 static int sl_nand_init(SysBusDevice *dev) 167 { 168 SLNANDState *s = SL_NAND(dev); 169 DriveInfo *nand; 170 171 s->ctl = 0; 172 nand = drive_get(IF_MTD, 0, 0); 173 s->nand = nand_init(nand ? nand->bdrv : NULL, s->manf_id, s->chip_id); 174 175 memory_region_init_io(&s->iomem, OBJECT(s), &sl_ops, s, "sl", 0x40); 176 sysbus_init_mmio(dev, &s->iomem); 177 178 return 0; 179 } 180 181 /* Spitz Keyboard */ 182 183 #define SPITZ_KEY_STROBE_NUM 11 184 #define SPITZ_KEY_SENSE_NUM 7 185 186 static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = { 187 12, 17, 91, 34, 36, 38, 39 188 }; 189 190 static const int spitz_gpio_key_strobe[SPITZ_KEY_STROBE_NUM] = { 191 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 192 }; 193 194 /* Eighth additional row maps the special keys */ 195 static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = { 196 { 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 }, 197 { -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 }, 198 { 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25, -1 , -1 , -1 }, 199 { 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26, -1 , 0x36, -1 }, 200 { 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34, -1 , 0x1c, 0x2a, -1 }, 201 { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33, -1 , 0x48, -1 , -1 , 0x38 }, 202 { 0x37, 0x3d, -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d, -1 , -1 }, 203 { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 }, 204 }; 205 206 #define SPITZ_GPIO_AK_INT 13 /* Remote control */ 207 #define SPITZ_GPIO_SYNC 16 /* Sync button */ 208 #define SPITZ_GPIO_ON_KEY 95 /* Power button */ 209 #define SPITZ_GPIO_SWA 97 /* Lid */ 210 #define SPITZ_GPIO_SWB 96 /* Tablet mode */ 211 212 /* The special buttons are mapped to unused keys */ 213 static const int spitz_gpiomap[5] = { 214 SPITZ_GPIO_AK_INT, SPITZ_GPIO_SYNC, SPITZ_GPIO_ON_KEY, 215 SPITZ_GPIO_SWA, SPITZ_GPIO_SWB, 216 }; 217 218 #define TYPE_SPITZ_KEYBOARD "spitz-keyboard" 219 #define SPITZ_KEYBOARD(obj) \ 220 OBJECT_CHECK(SpitzKeyboardState, (obj), TYPE_SPITZ_KEYBOARD) 221 222 typedef struct { 223 SysBusDevice parent_obj; 224 225 qemu_irq sense[SPITZ_KEY_SENSE_NUM]; 226 qemu_irq gpiomap[5]; 227 int keymap[0x80]; 228 uint16_t keyrow[SPITZ_KEY_SENSE_NUM]; 229 uint16_t strobe_state; 230 uint16_t sense_state; 231 232 uint16_t pre_map[0x100]; 233 uint16_t modifiers; 234 uint16_t imodifiers; 235 uint8_t fifo[16]; 236 int fifopos, fifolen; 237 QEMUTimer *kbdtimer; 238 } SpitzKeyboardState; 239 240 static void spitz_keyboard_sense_update(SpitzKeyboardState *s) 241 { 242 int i; 243 uint16_t strobe, sense = 0; 244 for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) { 245 strobe = s->keyrow[i] & s->strobe_state; 246 if (strobe) { 247 sense |= 1 << i; 248 if (!(s->sense_state & (1 << i))) 249 qemu_irq_raise(s->sense[i]); 250 } else if (s->sense_state & (1 << i)) 251 qemu_irq_lower(s->sense[i]); 252 } 253 254 s->sense_state = sense; 255 } 256 257 static void spitz_keyboard_strobe(void *opaque, int line, int level) 258 { 259 SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; 260 261 if (level) 262 s->strobe_state |= 1 << line; 263 else 264 s->strobe_state &= ~(1 << line); 265 spitz_keyboard_sense_update(s); 266 } 267 268 static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode) 269 { 270 int spitz_keycode = s->keymap[keycode & 0x7f]; 271 if (spitz_keycode == -1) 272 return; 273 274 /* Handle the additional keys */ 275 if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) { 276 qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80)); 277 return; 278 } 279 280 if (keycode & 0x80) 281 s->keyrow[spitz_keycode >> 4] &= ~(1 << (spitz_keycode & 0xf)); 282 else 283 s->keyrow[spitz_keycode >> 4] |= 1 << (spitz_keycode & 0xf); 284 285 spitz_keyboard_sense_update(s); 286 } 287 288 #define MOD_SHIFT (1 << 7) 289 #define MOD_CTRL (1 << 8) 290 #define MOD_FN (1 << 9) 291 292 #define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c 293 294 static void spitz_keyboard_handler(void *opaque, int keycode) 295 { 296 SpitzKeyboardState *s = opaque; 297 uint16_t code; 298 int mapcode; 299 switch (keycode) { 300 case 0x2a: /* Left Shift */ 301 s->modifiers |= 1; 302 break; 303 case 0xaa: 304 s->modifiers &= ~1; 305 break; 306 case 0x36: /* Right Shift */ 307 s->modifiers |= 2; 308 break; 309 case 0xb6: 310 s->modifiers &= ~2; 311 break; 312 case 0x1d: /* Control */ 313 s->modifiers |= 4; 314 break; 315 case 0x9d: 316 s->modifiers &= ~4; 317 break; 318 case 0x38: /* Alt */ 319 s->modifiers |= 8; 320 break; 321 case 0xb8: 322 s->modifiers &= ~8; 323 break; 324 } 325 326 code = s->pre_map[mapcode = ((s->modifiers & 3) ? 327 (keycode | MOD_SHIFT) : 328 (keycode & ~MOD_SHIFT))]; 329 330 if (code != mapcode) { 331 #if 0 332 if ((code & MOD_SHIFT) && !(s->modifiers & 1)) 333 QUEUE_KEY(0x2a | (keycode & 0x80)); 334 if ((code & MOD_CTRL ) && !(s->modifiers & 4)) 335 QUEUE_KEY(0x1d | (keycode & 0x80)); 336 if ((code & MOD_FN ) && !(s->modifiers & 8)) 337 QUEUE_KEY(0x38 | (keycode & 0x80)); 338 if ((code & MOD_FN ) && (s->modifiers & 1)) 339 QUEUE_KEY(0x2a | (~keycode & 0x80)); 340 if ((code & MOD_FN ) && (s->modifiers & 2)) 341 QUEUE_KEY(0x36 | (~keycode & 0x80)); 342 #else 343 if (keycode & 0x80) { 344 if ((s->imodifiers & 1 ) && !(s->modifiers & 1)) 345 QUEUE_KEY(0x2a | 0x80); 346 if ((s->imodifiers & 4 ) && !(s->modifiers & 4)) 347 QUEUE_KEY(0x1d | 0x80); 348 if ((s->imodifiers & 8 ) && !(s->modifiers & 8)) 349 QUEUE_KEY(0x38 | 0x80); 350 if ((s->imodifiers & 0x10) && (s->modifiers & 1)) 351 QUEUE_KEY(0x2a); 352 if ((s->imodifiers & 0x20) && (s->modifiers & 2)) 353 QUEUE_KEY(0x36); 354 s->imodifiers = 0; 355 } else { 356 if ((code & MOD_SHIFT) && !((s->modifiers | s->imodifiers) & 1)) { 357 QUEUE_KEY(0x2a); 358 s->imodifiers |= 1; 359 } 360 if ((code & MOD_CTRL ) && !((s->modifiers | s->imodifiers) & 4)) { 361 QUEUE_KEY(0x1d); 362 s->imodifiers |= 4; 363 } 364 if ((code & MOD_FN ) && !((s->modifiers | s->imodifiers) & 8)) { 365 QUEUE_KEY(0x38); 366 s->imodifiers |= 8; 367 } 368 if ((code & MOD_FN ) && (s->modifiers & 1) && 369 !(s->imodifiers & 0x10)) { 370 QUEUE_KEY(0x2a | 0x80); 371 s->imodifiers |= 0x10; 372 } 373 if ((code & MOD_FN ) && (s->modifiers & 2) && 374 !(s->imodifiers & 0x20)) { 375 QUEUE_KEY(0x36 | 0x80); 376 s->imodifiers |= 0x20; 377 } 378 } 379 #endif 380 } 381 382 QUEUE_KEY((code & 0x7f) | (keycode & 0x80)); 383 } 384 385 static void spitz_keyboard_tick(void *opaque) 386 { 387 SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; 388 389 if (s->fifolen) { 390 spitz_keyboard_keydown(s, s->fifo[s->fifopos ++]); 391 s->fifolen --; 392 if (s->fifopos >= 16) 393 s->fifopos = 0; 394 } 395 396 timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 397 get_ticks_per_sec() / 32); 398 } 399 400 static void spitz_keyboard_pre_map(SpitzKeyboardState *s) 401 { 402 int i; 403 for (i = 0; i < 0x100; i ++) 404 s->pre_map[i] = i; 405 s->pre_map[0x02 | MOD_SHIFT ] = 0x02 | MOD_SHIFT; /* exclam */ 406 s->pre_map[0x28 | MOD_SHIFT ] = 0x03 | MOD_SHIFT; /* quotedbl */ 407 s->pre_map[0x04 | MOD_SHIFT ] = 0x04 | MOD_SHIFT; /* numbersign */ 408 s->pre_map[0x05 | MOD_SHIFT ] = 0x05 | MOD_SHIFT; /* dollar */ 409 s->pre_map[0x06 | MOD_SHIFT ] = 0x06 | MOD_SHIFT; /* percent */ 410 s->pre_map[0x08 | MOD_SHIFT ] = 0x07 | MOD_SHIFT; /* ampersand */ 411 s->pre_map[0x28 ] = 0x08 | MOD_SHIFT; /* apostrophe */ 412 s->pre_map[0x0a | MOD_SHIFT ] = 0x09 | MOD_SHIFT; /* parenleft */ 413 s->pre_map[0x0b | MOD_SHIFT ] = 0x0a | MOD_SHIFT; /* parenright */ 414 s->pre_map[0x29 | MOD_SHIFT ] = 0x0b | MOD_SHIFT; /* asciitilde */ 415 s->pre_map[0x03 | MOD_SHIFT ] = 0x0c | MOD_SHIFT; /* at */ 416 s->pre_map[0xd3 ] = 0x0e | MOD_FN; /* Delete */ 417 s->pre_map[0x3a ] = 0x0f | MOD_FN; /* Caps_Lock */ 418 s->pre_map[0x07 | MOD_SHIFT ] = 0x11 | MOD_FN; /* asciicircum */ 419 s->pre_map[0x0d ] = 0x12 | MOD_FN; /* equal */ 420 s->pre_map[0x0d | MOD_SHIFT ] = 0x13 | MOD_FN; /* plus */ 421 s->pre_map[0x1a ] = 0x14 | MOD_FN; /* bracketleft */ 422 s->pre_map[0x1b ] = 0x15 | MOD_FN; /* bracketright */ 423 s->pre_map[0x1a | MOD_SHIFT ] = 0x16 | MOD_FN; /* braceleft */ 424 s->pre_map[0x1b | MOD_SHIFT ] = 0x17 | MOD_FN; /* braceright */ 425 s->pre_map[0x27 ] = 0x22 | MOD_FN; /* semicolon */ 426 s->pre_map[0x27 | MOD_SHIFT ] = 0x23 | MOD_FN; /* colon */ 427 s->pre_map[0x09 | MOD_SHIFT ] = 0x24 | MOD_FN; /* asterisk */ 428 s->pre_map[0x2b ] = 0x25 | MOD_FN; /* backslash */ 429 s->pre_map[0x2b | MOD_SHIFT ] = 0x26 | MOD_FN; /* bar */ 430 s->pre_map[0x0c | MOD_SHIFT ] = 0x30 | MOD_FN; /* underscore */ 431 s->pre_map[0x33 | MOD_SHIFT ] = 0x33 | MOD_FN; /* less */ 432 s->pre_map[0x35 ] = 0x33 | MOD_SHIFT; /* slash */ 433 s->pre_map[0x34 | MOD_SHIFT ] = 0x34 | MOD_FN; /* greater */ 434 s->pre_map[0x35 | MOD_SHIFT ] = 0x34 | MOD_SHIFT; /* question */ 435 s->pre_map[0x49 ] = 0x48 | MOD_FN; /* Page_Up */ 436 s->pre_map[0x51 ] = 0x50 | MOD_FN; /* Page_Down */ 437 438 s->modifiers = 0; 439 s->imodifiers = 0; 440 s->fifopos = 0; 441 s->fifolen = 0; 442 } 443 444 #undef MOD_SHIFT 445 #undef MOD_CTRL 446 #undef MOD_FN 447 448 static int spitz_keyboard_post_load(void *opaque, int version_id) 449 { 450 SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; 451 452 /* Release all pressed keys */ 453 memset(s->keyrow, 0, sizeof(s->keyrow)); 454 spitz_keyboard_sense_update(s); 455 s->modifiers = 0; 456 s->imodifiers = 0; 457 s->fifopos = 0; 458 s->fifolen = 0; 459 460 return 0; 461 } 462 463 static void spitz_keyboard_register(PXA2xxState *cpu) 464 { 465 int i; 466 DeviceState *dev; 467 SpitzKeyboardState *s; 468 469 dev = sysbus_create_simple(TYPE_SPITZ_KEYBOARD, -1, NULL); 470 s = SPITZ_KEYBOARD(dev); 471 472 for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) 473 qdev_connect_gpio_out(dev, i, qdev_get_gpio_in(cpu->gpio, spitz_gpio_key_sense[i])); 474 475 for (i = 0; i < 5; i ++) 476 s->gpiomap[i] = qdev_get_gpio_in(cpu->gpio, spitz_gpiomap[i]); 477 478 if (!graphic_rotate) 479 s->gpiomap[4] = qemu_irq_invert(s->gpiomap[4]); 480 481 for (i = 0; i < 5; i++) 482 qemu_set_irq(s->gpiomap[i], 0); 483 484 for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++) 485 qdev_connect_gpio_out(cpu->gpio, spitz_gpio_key_strobe[i], 486 qdev_get_gpio_in(dev, i)); 487 488 timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); 489 490 qemu_add_kbd_event_handler(spitz_keyboard_handler, s); 491 } 492 493 static int spitz_keyboard_init(SysBusDevice *sbd) 494 { 495 DeviceState *dev = DEVICE(sbd); 496 SpitzKeyboardState *s = SPITZ_KEYBOARD(dev); 497 int i, j; 498 499 for (i = 0; i < 0x80; i ++) 500 s->keymap[i] = -1; 501 for (i = 0; i < SPITZ_KEY_SENSE_NUM + 1; i ++) 502 for (j = 0; j < SPITZ_KEY_STROBE_NUM; j ++) 503 if (spitz_keymap[i][j] != -1) 504 s->keymap[spitz_keymap[i][j]] = (i << 4) | j; 505 506 spitz_keyboard_pre_map(s); 507 508 s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); 509 qdev_init_gpio_in(dev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM); 510 qdev_init_gpio_out(dev, s->sense, SPITZ_KEY_SENSE_NUM); 511 512 return 0; 513 } 514 515 /* LCD backlight controller */ 516 517 #define LCDTG_RESCTL 0x00 518 #define LCDTG_PHACTRL 0x01 519 #define LCDTG_DUTYCTRL 0x02 520 #define LCDTG_POWERREG0 0x03 521 #define LCDTG_POWERREG1 0x04 522 #define LCDTG_GPOR3 0x05 523 #define LCDTG_PICTRL 0x06 524 #define LCDTG_POLCTRL 0x07 525 526 typedef struct { 527 SSISlave ssidev; 528 uint32_t bl_intensity; 529 uint32_t bl_power; 530 } SpitzLCDTG; 531 532 static void spitz_bl_update(SpitzLCDTG *s) 533 { 534 if (s->bl_power && s->bl_intensity) 535 zaurus_printf("LCD Backlight now at %i/63\n", s->bl_intensity); 536 else 537 zaurus_printf("LCD Backlight now off\n"); 538 } 539 540 /* FIXME: Implement GPIO properly and remove this hack. */ 541 static SpitzLCDTG *spitz_lcdtg; 542 543 static inline void spitz_bl_bit5(void *opaque, int line, int level) 544 { 545 SpitzLCDTG *s = spitz_lcdtg; 546 int prev = s->bl_intensity; 547 548 if (level) 549 s->bl_intensity &= ~0x20; 550 else 551 s->bl_intensity |= 0x20; 552 553 if (s->bl_power && prev != s->bl_intensity) 554 spitz_bl_update(s); 555 } 556 557 static inline void spitz_bl_power(void *opaque, int line, int level) 558 { 559 SpitzLCDTG *s = spitz_lcdtg; 560 s->bl_power = !!level; 561 spitz_bl_update(s); 562 } 563 564 static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) 565 { 566 SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); 567 int addr; 568 addr = value >> 5; 569 value &= 0x1f; 570 571 switch (addr) { 572 case LCDTG_RESCTL: 573 if (value) 574 zaurus_printf("LCD in QVGA mode\n"); 575 else 576 zaurus_printf("LCD in VGA mode\n"); 577 break; 578 579 case LCDTG_DUTYCTRL: 580 s->bl_intensity &= ~0x1f; 581 s->bl_intensity |= value; 582 if (s->bl_power) 583 spitz_bl_update(s); 584 break; 585 586 case LCDTG_POWERREG0: 587 /* Set common voltage to M62332FP */ 588 break; 589 } 590 return 0; 591 } 592 593 static int spitz_lcdtg_init(SSISlave *dev) 594 { 595 SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); 596 597 spitz_lcdtg = s; 598 s->bl_power = 0; 599 s->bl_intensity = 0x20; 600 601 return 0; 602 } 603 604 /* SSP devices */ 605 606 #define CORGI_SSP_PORT 2 607 608 #define SPITZ_GPIO_LCDCON_CS 53 609 #define SPITZ_GPIO_ADS7846_CS 14 610 #define SPITZ_GPIO_MAX1111_CS 20 611 #define SPITZ_GPIO_TP_INT 11 612 613 static DeviceState *max1111; 614 615 /* "Demux" the signal based on current chipselect */ 616 typedef struct { 617 SSISlave ssidev; 618 SSIBus *bus[3]; 619 uint32_t enable[3]; 620 } CorgiSSPState; 621 622 static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value) 623 { 624 CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev); 625 int i; 626 627 for (i = 0; i < 3; i++) { 628 if (s->enable[i]) { 629 return ssi_transfer(s->bus[i], value); 630 } 631 } 632 return 0; 633 } 634 635 static void corgi_ssp_gpio_cs(void *opaque, int line, int level) 636 { 637 CorgiSSPState *s = (CorgiSSPState *)opaque; 638 assert(line >= 0 && line < 3); 639 s->enable[line] = !level; 640 } 641 642 #define MAX1111_BATT_VOLT 1 643 #define MAX1111_BATT_TEMP 2 644 #define MAX1111_ACIN_VOLT 3 645 646 #define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ 647 #define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ 648 #define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ 649 650 static void spitz_adc_temp_on(void *opaque, int line, int level) 651 { 652 if (!max1111) 653 return; 654 655 if (level) 656 max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP); 657 else 658 max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); 659 } 660 661 static int corgi_ssp_init(SSISlave *dev) 662 { 663 CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev); 664 665 qdev_init_gpio_in(&dev->qdev, corgi_ssp_gpio_cs, 3); 666 s->bus[0] = ssi_create_bus(&dev->qdev, "ssi0"); 667 s->bus[1] = ssi_create_bus(&dev->qdev, "ssi1"); 668 s->bus[2] = ssi_create_bus(&dev->qdev, "ssi2"); 669 670 return 0; 671 } 672 673 static void spitz_ssp_attach(PXA2xxState *cpu) 674 { 675 DeviceState *mux; 676 DeviceState *dev; 677 void *bus; 678 679 mux = ssi_create_slave(cpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); 680 681 bus = qdev_get_child_bus(mux, "ssi0"); 682 ssi_create_slave(bus, "spitz-lcdtg"); 683 684 bus = qdev_get_child_bus(mux, "ssi1"); 685 dev = ssi_create_slave(bus, "ads7846"); 686 qdev_connect_gpio_out(dev, 0, 687 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_TP_INT)); 688 689 bus = qdev_get_child_bus(mux, "ssi2"); 690 max1111 = ssi_create_slave(bus, "max1111"); 691 max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); 692 max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); 693 max111x_set_input(max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); 694 695 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_LCDCON_CS, 696 qdev_get_gpio_in(mux, 0)); 697 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ADS7846_CS, 698 qdev_get_gpio_in(mux, 1)); 699 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_MAX1111_CS, 700 qdev_get_gpio_in(mux, 2)); 701 } 702 703 /* CF Microdrive */ 704 705 static void spitz_microdrive_attach(PXA2xxState *cpu, int slot) 706 { 707 PCMCIACardState *md; 708 DriveInfo *dinfo; 709 710 dinfo = drive_get(IF_IDE, 0, 0); 711 if (!dinfo || dinfo->media_cd) 712 return; 713 md = dscm1xxxx_init(dinfo); 714 pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md); 715 } 716 717 /* Wm8750 and Max7310 on I2C */ 718 719 #define AKITA_MAX_ADDR 0x18 720 #define SPITZ_WM_ADDRL 0x1b 721 #define SPITZ_WM_ADDRH 0x1a 722 723 #define SPITZ_GPIO_WM 5 724 725 static void spitz_wm8750_addr(void *opaque, int line, int level) 726 { 727 I2CSlave *wm = (I2CSlave *) opaque; 728 if (level) 729 i2c_set_slave_address(wm, SPITZ_WM_ADDRH); 730 else 731 i2c_set_slave_address(wm, SPITZ_WM_ADDRL); 732 } 733 734 static void spitz_i2c_setup(PXA2xxState *cpu) 735 { 736 /* Attach the CPU on one end of our I2C bus. */ 737 i2c_bus *bus = pxa2xx_i2c_bus(cpu->i2c[0]); 738 739 DeviceState *wm; 740 741 /* Attach a WM8750 to the bus */ 742 wm = i2c_create_slave(bus, "wm8750", 0); 743 744 spitz_wm8750_addr(wm, 0, 0); 745 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM, 746 qemu_allocate_irqs(spitz_wm8750_addr, wm, 1)[0]); 747 /* .. and to the sound interface. */ 748 cpu->i2s->opaque = wm; 749 cpu->i2s->codec_out = wm8750_dac_dat; 750 cpu->i2s->codec_in = wm8750_adc_dat; 751 wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s); 752 } 753 754 static void spitz_akita_i2c_setup(PXA2xxState *cpu) 755 { 756 /* Attach a Max7310 to Akita I2C bus. */ 757 i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310", 758 AKITA_MAX_ADDR); 759 } 760 761 /* Other peripherals */ 762 763 static void spitz_out_switch(void *opaque, int line, int level) 764 { 765 switch (line) { 766 case 0: 767 zaurus_printf("Charging %s.\n", level ? "off" : "on"); 768 break; 769 case 1: 770 zaurus_printf("Discharging %s.\n", level ? "on" : "off"); 771 break; 772 case 2: 773 zaurus_printf("Green LED %s.\n", level ? "on" : "off"); 774 break; 775 case 3: 776 zaurus_printf("Orange LED %s.\n", level ? "on" : "off"); 777 break; 778 case 4: 779 spitz_bl_bit5(opaque, line, level); 780 break; 781 case 5: 782 spitz_bl_power(opaque, line, level); 783 break; 784 case 6: 785 spitz_adc_temp_on(opaque, line, level); 786 break; 787 } 788 } 789 790 #define SPITZ_SCP_LED_GREEN 1 791 #define SPITZ_SCP_JK_B 2 792 #define SPITZ_SCP_CHRG_ON 3 793 #define SPITZ_SCP_MUTE_L 4 794 #define SPITZ_SCP_MUTE_R 5 795 #define SPITZ_SCP_CF_POWER 6 796 #define SPITZ_SCP_LED_ORANGE 7 797 #define SPITZ_SCP_JK_A 8 798 #define SPITZ_SCP_ADC_TEMP_ON 9 799 #define SPITZ_SCP2_IR_ON 1 800 #define SPITZ_SCP2_AKIN_PULLUP 2 801 #define SPITZ_SCP2_BACKLIGHT_CONT 7 802 #define SPITZ_SCP2_BACKLIGHT_ON 8 803 #define SPITZ_SCP2_MIC_BIAS 9 804 805 static void spitz_scoop_gpio_setup(PXA2xxState *cpu, 806 DeviceState *scp0, DeviceState *scp1) 807 { 808 qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8); 809 810 qdev_connect_gpio_out(scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); 811 qdev_connect_gpio_out(scp0, SPITZ_SCP_JK_B, outsignals[1]); 812 qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); 813 qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); 814 815 if (scp1) { 816 qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]); 817 qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]); 818 } 819 820 qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); 821 } 822 823 #define SPITZ_GPIO_HSYNC 22 824 #define SPITZ_GPIO_SD_DETECT 9 825 #define SPITZ_GPIO_SD_WP 81 826 #define SPITZ_GPIO_ON_RESET 89 827 #define SPITZ_GPIO_BAT_COVER 90 828 #define SPITZ_GPIO_CF1_IRQ 105 829 #define SPITZ_GPIO_CF1_CD 94 830 #define SPITZ_GPIO_CF2_IRQ 106 831 #define SPITZ_GPIO_CF2_CD 93 832 833 static int spitz_hsync; 834 835 static void spitz_lcd_hsync_handler(void *opaque, int line, int level) 836 { 837 PXA2xxState *cpu = (PXA2xxState *) opaque; 838 qemu_set_irq(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_HSYNC), spitz_hsync); 839 spitz_hsync ^= 1; 840 } 841 842 static void spitz_gpio_setup(PXA2xxState *cpu, int slots) 843 { 844 qemu_irq lcd_hsync; 845 /* 846 * Bad hack: We toggle the LCD hsync GPIO on every GPIO status 847 * read to satisfy broken guests that poll-wait for hsync. 848 * Simulating a real hsync event would be less practical and 849 * wouldn't guarantee that a guest ever exits the loop. 850 */ 851 spitz_hsync = 0; 852 lcd_hsync = qemu_allocate_irqs(spitz_lcd_hsync_handler, cpu, 1)[0]; 853 pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync); 854 pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync); 855 856 /* MMC/SD host */ 857 pxa2xx_mmci_handlers(cpu->mmc, 858 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_WP), 859 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_DETECT)); 860 861 /* Battery lock always closed */ 862 qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_BAT_COVER)); 863 864 /* Handle reset */ 865 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ON_RESET, cpu->reset); 866 867 /* PCMCIA signals: card's IRQ and Card-Detect */ 868 if (slots >= 1) 869 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0], 870 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_IRQ), 871 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_CD)); 872 if (slots >= 2) 873 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1], 874 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_IRQ), 875 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_CD)); 876 } 877 878 /* Board init. */ 879 enum spitz_model_e { spitz, akita, borzoi, terrier }; 880 881 #define SPITZ_RAM 0x04000000 882 #define SPITZ_ROM 0x00800000 883 884 static struct arm_boot_info spitz_binfo = { 885 .loader_start = PXA2XX_SDRAM_BASE, 886 .ram_size = 0x04000000, 887 }; 888 889 static void spitz_common_init(QEMUMachineInitArgs *args, 890 enum spitz_model_e model, int arm_id) 891 { 892 PXA2xxState *mpu; 893 DeviceState *scp0, *scp1 = NULL; 894 MemoryRegion *address_space_mem = get_system_memory(); 895 MemoryRegion *rom = g_new(MemoryRegion, 1); 896 const char *cpu_model = args->cpu_model; 897 898 if (!cpu_model) 899 cpu_model = (model == terrier) ? "pxa270-c5" : "pxa270-c0"; 900 901 /* Setup CPU & memory */ 902 mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, cpu_model); 903 904 sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); 905 906 memory_region_init_ram(rom, NULL, "spitz.rom", SPITZ_ROM); 907 vmstate_register_ram_global(rom); 908 memory_region_set_readonly(rom, true); 909 memory_region_add_subregion(address_space_mem, 0, rom); 910 911 /* Setup peripherals */ 912 spitz_keyboard_register(mpu); 913 914 spitz_ssp_attach(mpu); 915 916 scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); 917 if (model != akita) { 918 scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); 919 } 920 921 spitz_scoop_gpio_setup(mpu, scp0, scp1); 922 923 spitz_gpio_setup(mpu, (model == akita) ? 1 : 2); 924 925 spitz_i2c_setup(mpu); 926 927 if (model == akita) 928 spitz_akita_i2c_setup(mpu); 929 930 if (model == terrier) 931 /* A 6.0 GB microdrive is permanently sitting in CF slot 1. */ 932 spitz_microdrive_attach(mpu, 1); 933 else if (model != akita) 934 /* A 4.0 GB microdrive is permanently sitting in CF slot 0. */ 935 spitz_microdrive_attach(mpu, 0); 936 937 spitz_binfo.kernel_filename = args->kernel_filename; 938 spitz_binfo.kernel_cmdline = args->kernel_cmdline; 939 spitz_binfo.initrd_filename = args->initrd_filename; 940 spitz_binfo.board_id = arm_id; 941 arm_load_kernel(mpu->cpu, &spitz_binfo); 942 sl_bootparam_write(SL_PXA_PARAM_BASE); 943 } 944 945 static void spitz_init(QEMUMachineInitArgs *args) 946 { 947 spitz_common_init(args, spitz, 0x2c9); 948 } 949 950 static void borzoi_init(QEMUMachineInitArgs *args) 951 { 952 spitz_common_init(args, borzoi, 0x33f); 953 } 954 955 static void akita_init(QEMUMachineInitArgs *args) 956 { 957 spitz_common_init(args, akita, 0x2e8); 958 } 959 960 static void terrier_init(QEMUMachineInitArgs *args) 961 { 962 spitz_common_init(args, terrier, 0x33f); 963 } 964 965 static QEMUMachine akitapda_machine = { 966 .name = "akita", 967 .desc = "Akita PDA (PXA270)", 968 .init = akita_init, 969 }; 970 971 static QEMUMachine spitzpda_machine = { 972 .name = "spitz", 973 .desc = "Spitz PDA (PXA270)", 974 .init = spitz_init, 975 }; 976 977 static QEMUMachine borzoipda_machine = { 978 .name = "borzoi", 979 .desc = "Borzoi PDA (PXA270)", 980 .init = borzoi_init, 981 }; 982 983 static QEMUMachine terrierpda_machine = { 984 .name = "terrier", 985 .desc = "Terrier PDA (PXA270)", 986 .init = terrier_init, 987 }; 988 989 static void spitz_machine_init(void) 990 { 991 qemu_register_machine(&akitapda_machine); 992 qemu_register_machine(&spitzpda_machine); 993 qemu_register_machine(&borzoipda_machine); 994 qemu_register_machine(&terrierpda_machine); 995 } 996 997 machine_init(spitz_machine_init); 998 999 static bool is_version_0(void *opaque, int version_id) 1000 { 1001 return version_id == 0; 1002 } 1003 1004 static VMStateDescription vmstate_sl_nand_info = { 1005 .name = "sl-nand", 1006 .version_id = 0, 1007 .minimum_version_id = 0, 1008 .minimum_version_id_old = 0, 1009 .fields = (VMStateField []) { 1010 VMSTATE_UINT8(ctl, SLNANDState), 1011 VMSTATE_STRUCT(ecc, SLNANDState, 0, vmstate_ecc_state, ECCState), 1012 VMSTATE_END_OF_LIST(), 1013 }, 1014 }; 1015 1016 static Property sl_nand_properties[] = { 1017 DEFINE_PROP_UINT8("manf_id", SLNANDState, manf_id, NAND_MFR_SAMSUNG), 1018 DEFINE_PROP_UINT8("chip_id", SLNANDState, chip_id, 0xf1), 1019 DEFINE_PROP_END_OF_LIST(), 1020 }; 1021 1022 static void sl_nand_class_init(ObjectClass *klass, void *data) 1023 { 1024 DeviceClass *dc = DEVICE_CLASS(klass); 1025 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 1026 1027 k->init = sl_nand_init; 1028 dc->vmsd = &vmstate_sl_nand_info; 1029 dc->props = sl_nand_properties; 1030 } 1031 1032 static const TypeInfo sl_nand_info = { 1033 .name = TYPE_SL_NAND, 1034 .parent = TYPE_SYS_BUS_DEVICE, 1035 .instance_size = sizeof(SLNANDState), 1036 .class_init = sl_nand_class_init, 1037 }; 1038 1039 static VMStateDescription vmstate_spitz_kbd = { 1040 .name = "spitz-keyboard", 1041 .version_id = 1, 1042 .minimum_version_id = 0, 1043 .minimum_version_id_old = 0, 1044 .post_load = spitz_keyboard_post_load, 1045 .fields = (VMStateField []) { 1046 VMSTATE_UINT16(sense_state, SpitzKeyboardState), 1047 VMSTATE_UINT16(strobe_state, SpitzKeyboardState), 1048 VMSTATE_UNUSED_TEST(is_version_0, 5), 1049 VMSTATE_END_OF_LIST(), 1050 }, 1051 }; 1052 1053 static Property spitz_keyboard_properties[] = { 1054 DEFINE_PROP_END_OF_LIST(), 1055 }; 1056 1057 static void spitz_keyboard_class_init(ObjectClass *klass, void *data) 1058 { 1059 DeviceClass *dc = DEVICE_CLASS(klass); 1060 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 1061 1062 k->init = spitz_keyboard_init; 1063 dc->vmsd = &vmstate_spitz_kbd; 1064 dc->props = spitz_keyboard_properties; 1065 } 1066 1067 static const TypeInfo spitz_keyboard_info = { 1068 .name = TYPE_SPITZ_KEYBOARD, 1069 .parent = TYPE_SYS_BUS_DEVICE, 1070 .instance_size = sizeof(SpitzKeyboardState), 1071 .class_init = spitz_keyboard_class_init, 1072 }; 1073 1074 static const VMStateDescription vmstate_corgi_ssp_regs = { 1075 .name = "corgi-ssp", 1076 .version_id = 2, 1077 .minimum_version_id = 2, 1078 .minimum_version_id_old = 2, 1079 .fields = (VMStateField []) { 1080 VMSTATE_SSI_SLAVE(ssidev, CorgiSSPState), 1081 VMSTATE_UINT32_ARRAY(enable, CorgiSSPState, 3), 1082 VMSTATE_END_OF_LIST(), 1083 } 1084 }; 1085 1086 static void corgi_ssp_class_init(ObjectClass *klass, void *data) 1087 { 1088 DeviceClass *dc = DEVICE_CLASS(klass); 1089 SSISlaveClass *k = SSI_SLAVE_CLASS(klass); 1090 1091 k->init = corgi_ssp_init; 1092 k->transfer = corgi_ssp_transfer; 1093 dc->vmsd = &vmstate_corgi_ssp_regs; 1094 } 1095 1096 static const TypeInfo corgi_ssp_info = { 1097 .name = "corgi-ssp", 1098 .parent = TYPE_SSI_SLAVE, 1099 .instance_size = sizeof(CorgiSSPState), 1100 .class_init = corgi_ssp_class_init, 1101 }; 1102 1103 static const VMStateDescription vmstate_spitz_lcdtg_regs = { 1104 .name = "spitz-lcdtg", 1105 .version_id = 1, 1106 .minimum_version_id = 1, 1107 .minimum_version_id_old = 1, 1108 .fields = (VMStateField []) { 1109 VMSTATE_SSI_SLAVE(ssidev, SpitzLCDTG), 1110 VMSTATE_UINT32(bl_intensity, SpitzLCDTG), 1111 VMSTATE_UINT32(bl_power, SpitzLCDTG), 1112 VMSTATE_END_OF_LIST(), 1113 } 1114 }; 1115 1116 static void spitz_lcdtg_class_init(ObjectClass *klass, void *data) 1117 { 1118 DeviceClass *dc = DEVICE_CLASS(klass); 1119 SSISlaveClass *k = SSI_SLAVE_CLASS(klass); 1120 1121 k->init = spitz_lcdtg_init; 1122 k->transfer = spitz_lcdtg_transfer; 1123 dc->vmsd = &vmstate_spitz_lcdtg_regs; 1124 } 1125 1126 static const TypeInfo spitz_lcdtg_info = { 1127 .name = "spitz-lcdtg", 1128 .parent = TYPE_SSI_SLAVE, 1129 .instance_size = sizeof(SpitzLCDTG), 1130 .class_init = spitz_lcdtg_class_init, 1131 }; 1132 1133 static void spitz_register_types(void) 1134 { 1135 type_register_static(&corgi_ssp_info); 1136 type_register_static(&spitz_lcdtg_info); 1137 type_register_static(&spitz_keyboard_info); 1138 type_register_static(&sl_nand_info); 1139 } 1140 1141 type_init(spitz_register_types) 1142