1 /* 2 * PXA270-based Clamshell PDA platforms. 3 * 4 * Copyright (c) 2006 Openedhand Ltd. 5 * Written by Andrzej Zaborowski <balrog@zabor.org> 6 * 7 * This code is licensed under the GNU GPL v2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "qemu/osdep.h" 14 #include "qapi/error.h" 15 #include "hw/hw.h" 16 #include "hw/arm/pxa.h" 17 #include "hw/arm/arm.h" 18 #include "sysemu/sysemu.h" 19 #include "hw/pcmcia.h" 20 #include "hw/i2c/i2c.h" 21 #include "hw/ssi/ssi.h" 22 #include "hw/block/flash.h" 23 #include "qemu/timer.h" 24 #include "hw/devices.h" 25 #include "hw/arm/sharpsl.h" 26 #include "ui/console.h" 27 #include "hw/audio/wm8750.h" 28 #include "audio/audio.h" 29 #include "hw/boards.h" 30 #include "sysemu/block-backend.h" 31 #include "hw/sysbus.h" 32 #include "exec/address-spaces.h" 33 #include "cpu.h" 34 35 #undef REG_FMT 36 #define REG_FMT "0x%02lx" 37 38 /* Spitz Flash */ 39 #define FLASH_BASE 0x0c000000 40 #define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ 41 #define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ 42 #define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ 43 #define FLASH_ECCCNTR 0x0c /* ECC byte counter */ 44 #define FLASH_ECCCLRR 0x10 /* Clear ECC */ 45 #define FLASH_FLASHIO 0x14 /* Flash I/O */ 46 #define FLASH_FLASHCTL 0x18 /* Flash Control */ 47 48 #define FLASHCTL_CE0 (1 << 0) 49 #define FLASHCTL_CLE (1 << 1) 50 #define FLASHCTL_ALE (1 << 2) 51 #define FLASHCTL_WP (1 << 3) 52 #define FLASHCTL_CE1 (1 << 4) 53 #define FLASHCTL_RYBY (1 << 5) 54 #define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) 55 56 #define TYPE_SL_NAND "sl-nand" 57 #define SL_NAND(obj) OBJECT_CHECK(SLNANDState, (obj), TYPE_SL_NAND) 58 59 typedef struct { 60 SysBusDevice parent_obj; 61 62 MemoryRegion iomem; 63 DeviceState *nand; 64 uint8_t ctl; 65 uint8_t manf_id; 66 uint8_t chip_id; 67 ECCState ecc; 68 } SLNANDState; 69 70 static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) 71 { 72 SLNANDState *s = (SLNANDState *) opaque; 73 int ryby; 74 75 switch (addr) { 76 #define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) 77 case FLASH_ECCLPLB: 78 return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) | 79 BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7); 80 81 #define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) 82 case FLASH_ECCLPUB: 83 return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) | 84 BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7); 85 86 case FLASH_ECCCP: 87 return s->ecc.cp; 88 89 case FLASH_ECCCNTR: 90 return s->ecc.count & 0xff; 91 92 case FLASH_FLASHCTL: 93 nand_getpins(s->nand, &ryby); 94 if (ryby) 95 return s->ctl | FLASHCTL_RYBY; 96 else 97 return s->ctl; 98 99 case FLASH_FLASHIO: 100 if (size == 4) { 101 return ecc_digest(&s->ecc, nand_getio(s->nand)) | 102 (ecc_digest(&s->ecc, nand_getio(s->nand)) << 16); 103 } 104 return ecc_digest(&s->ecc, nand_getio(s->nand)); 105 106 default: 107 zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); 108 } 109 return 0; 110 } 111 112 static void sl_write(void *opaque, hwaddr addr, 113 uint64_t value, unsigned size) 114 { 115 SLNANDState *s = (SLNANDState *) opaque; 116 117 switch (addr) { 118 case FLASH_ECCCLRR: 119 /* Value is ignored. */ 120 ecc_reset(&s->ecc); 121 break; 122 123 case FLASH_FLASHCTL: 124 s->ctl = value & 0xff & ~FLASHCTL_RYBY; 125 nand_setpins(s->nand, 126 s->ctl & FLASHCTL_CLE, 127 s->ctl & FLASHCTL_ALE, 128 s->ctl & FLASHCTL_NCE, 129 s->ctl & FLASHCTL_WP, 130 0); 131 break; 132 133 case FLASH_FLASHIO: 134 nand_setio(s->nand, ecc_digest(&s->ecc, value & 0xff)); 135 break; 136 137 default: 138 zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); 139 } 140 } 141 142 enum { 143 FLASH_128M, 144 FLASH_1024M, 145 }; 146 147 static const MemoryRegionOps sl_ops = { 148 .read = sl_read, 149 .write = sl_write, 150 .endianness = DEVICE_NATIVE_ENDIAN, 151 }; 152 153 static void sl_flash_register(PXA2xxState *cpu, int size) 154 { 155 DeviceState *dev; 156 157 dev = qdev_create(NULL, TYPE_SL_NAND); 158 159 qdev_prop_set_uint8(dev, "manf_id", NAND_MFR_SAMSUNG); 160 if (size == FLASH_128M) 161 qdev_prop_set_uint8(dev, "chip_id", 0x73); 162 else if (size == FLASH_1024M) 163 qdev_prop_set_uint8(dev, "chip_id", 0xf1); 164 165 qdev_init_nofail(dev); 166 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, FLASH_BASE); 167 } 168 169 static void sl_nand_init(Object *obj) 170 { 171 SLNANDState *s = SL_NAND(obj); 172 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 173 DriveInfo *nand; 174 175 s->ctl = 0; 176 /* FIXME use a qdev drive property instead of drive_get() */ 177 nand = drive_get(IF_MTD, 0, 0); 178 s->nand = nand_init(nand ? blk_by_legacy_dinfo(nand) : NULL, 179 s->manf_id, s->chip_id); 180 181 memory_region_init_io(&s->iomem, obj, &sl_ops, s, "sl", 0x40); 182 sysbus_init_mmio(dev, &s->iomem); 183 } 184 185 /* Spitz Keyboard */ 186 187 #define SPITZ_KEY_STROBE_NUM 11 188 #define SPITZ_KEY_SENSE_NUM 7 189 190 static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = { 191 12, 17, 91, 34, 36, 38, 39 192 }; 193 194 static const int spitz_gpio_key_strobe[SPITZ_KEY_STROBE_NUM] = { 195 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 196 }; 197 198 /* Eighth additional row maps the special keys */ 199 static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = { 200 { 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 }, 201 { -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 }, 202 { 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25, -1 , -1 , -1 }, 203 { 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26, -1 , 0x36, -1 }, 204 { 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34, -1 , 0x1c, 0x2a, -1 }, 205 { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33, -1 , 0x48, -1 , -1 , 0x38 }, 206 { 0x37, 0x3d, -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d, -1 , -1 }, 207 { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 }, 208 }; 209 210 #define SPITZ_GPIO_AK_INT 13 /* Remote control */ 211 #define SPITZ_GPIO_SYNC 16 /* Sync button */ 212 #define SPITZ_GPIO_ON_KEY 95 /* Power button */ 213 #define SPITZ_GPIO_SWA 97 /* Lid */ 214 #define SPITZ_GPIO_SWB 96 /* Tablet mode */ 215 216 /* The special buttons are mapped to unused keys */ 217 static const int spitz_gpiomap[5] = { 218 SPITZ_GPIO_AK_INT, SPITZ_GPIO_SYNC, SPITZ_GPIO_ON_KEY, 219 SPITZ_GPIO_SWA, SPITZ_GPIO_SWB, 220 }; 221 222 #define TYPE_SPITZ_KEYBOARD "spitz-keyboard" 223 #define SPITZ_KEYBOARD(obj) \ 224 OBJECT_CHECK(SpitzKeyboardState, (obj), TYPE_SPITZ_KEYBOARD) 225 226 typedef struct { 227 SysBusDevice parent_obj; 228 229 qemu_irq sense[SPITZ_KEY_SENSE_NUM]; 230 qemu_irq gpiomap[5]; 231 int keymap[0x80]; 232 uint16_t keyrow[SPITZ_KEY_SENSE_NUM]; 233 uint16_t strobe_state; 234 uint16_t sense_state; 235 236 uint16_t pre_map[0x100]; 237 uint16_t modifiers; 238 uint16_t imodifiers; 239 uint8_t fifo[16]; 240 int fifopos, fifolen; 241 QEMUTimer *kbdtimer; 242 } SpitzKeyboardState; 243 244 static void spitz_keyboard_sense_update(SpitzKeyboardState *s) 245 { 246 int i; 247 uint16_t strobe, sense = 0; 248 for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) { 249 strobe = s->keyrow[i] & s->strobe_state; 250 if (strobe) { 251 sense |= 1 << i; 252 if (!(s->sense_state & (1 << i))) 253 qemu_irq_raise(s->sense[i]); 254 } else if (s->sense_state & (1 << i)) 255 qemu_irq_lower(s->sense[i]); 256 } 257 258 s->sense_state = sense; 259 } 260 261 static void spitz_keyboard_strobe(void *opaque, int line, int level) 262 { 263 SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; 264 265 if (level) 266 s->strobe_state |= 1 << line; 267 else 268 s->strobe_state &= ~(1 << line); 269 spitz_keyboard_sense_update(s); 270 } 271 272 static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode) 273 { 274 int spitz_keycode = s->keymap[keycode & 0x7f]; 275 if (spitz_keycode == -1) 276 return; 277 278 /* Handle the additional keys */ 279 if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) { 280 qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80)); 281 return; 282 } 283 284 if (keycode & 0x80) 285 s->keyrow[spitz_keycode >> 4] &= ~(1 << (spitz_keycode & 0xf)); 286 else 287 s->keyrow[spitz_keycode >> 4] |= 1 << (spitz_keycode & 0xf); 288 289 spitz_keyboard_sense_update(s); 290 } 291 292 #define SPITZ_MOD_SHIFT (1 << 7) 293 #define SPITZ_MOD_CTRL (1 << 8) 294 #define SPITZ_MOD_FN (1 << 9) 295 296 #define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c 297 298 static void spitz_keyboard_handler(void *opaque, int keycode) 299 { 300 SpitzKeyboardState *s = opaque; 301 uint16_t code; 302 int mapcode; 303 switch (keycode) { 304 case 0x2a: /* Left Shift */ 305 s->modifiers |= 1; 306 break; 307 case 0xaa: 308 s->modifiers &= ~1; 309 break; 310 case 0x36: /* Right Shift */ 311 s->modifiers |= 2; 312 break; 313 case 0xb6: 314 s->modifiers &= ~2; 315 break; 316 case 0x1d: /* Control */ 317 s->modifiers |= 4; 318 break; 319 case 0x9d: 320 s->modifiers &= ~4; 321 break; 322 case 0x38: /* Alt */ 323 s->modifiers |= 8; 324 break; 325 case 0xb8: 326 s->modifiers &= ~8; 327 break; 328 } 329 330 code = s->pre_map[mapcode = ((s->modifiers & 3) ? 331 (keycode | SPITZ_MOD_SHIFT) : 332 (keycode & ~SPITZ_MOD_SHIFT))]; 333 334 if (code != mapcode) { 335 #if 0 336 if ((code & SPITZ_MOD_SHIFT) && !(s->modifiers & 1)) { 337 QUEUE_KEY(0x2a | (keycode & 0x80)); 338 } 339 if ((code & SPITZ_MOD_CTRL) && !(s->modifiers & 4)) { 340 QUEUE_KEY(0x1d | (keycode & 0x80)); 341 } 342 if ((code & SPITZ_MOD_FN) && !(s->modifiers & 8)) { 343 QUEUE_KEY(0x38 | (keycode & 0x80)); 344 } 345 if ((code & SPITZ_MOD_FN) && (s->modifiers & 1)) { 346 QUEUE_KEY(0x2a | (~keycode & 0x80)); 347 } 348 if ((code & SPITZ_MOD_FN) && (s->modifiers & 2)) { 349 QUEUE_KEY(0x36 | (~keycode & 0x80)); 350 } 351 #else 352 if (keycode & 0x80) { 353 if ((s->imodifiers & 1 ) && !(s->modifiers & 1)) 354 QUEUE_KEY(0x2a | 0x80); 355 if ((s->imodifiers & 4 ) && !(s->modifiers & 4)) 356 QUEUE_KEY(0x1d | 0x80); 357 if ((s->imodifiers & 8 ) && !(s->modifiers & 8)) 358 QUEUE_KEY(0x38 | 0x80); 359 if ((s->imodifiers & 0x10) && (s->modifiers & 1)) 360 QUEUE_KEY(0x2a); 361 if ((s->imodifiers & 0x20) && (s->modifiers & 2)) 362 QUEUE_KEY(0x36); 363 s->imodifiers = 0; 364 } else { 365 if ((code & SPITZ_MOD_SHIFT) && 366 !((s->modifiers | s->imodifiers) & 1)) { 367 QUEUE_KEY(0x2a); 368 s->imodifiers |= 1; 369 } 370 if ((code & SPITZ_MOD_CTRL) && 371 !((s->modifiers | s->imodifiers) & 4)) { 372 QUEUE_KEY(0x1d); 373 s->imodifiers |= 4; 374 } 375 if ((code & SPITZ_MOD_FN) && 376 !((s->modifiers | s->imodifiers) & 8)) { 377 QUEUE_KEY(0x38); 378 s->imodifiers |= 8; 379 } 380 if ((code & SPITZ_MOD_FN) && (s->modifiers & 1) && 381 !(s->imodifiers & 0x10)) { 382 QUEUE_KEY(0x2a | 0x80); 383 s->imodifiers |= 0x10; 384 } 385 if ((code & SPITZ_MOD_FN) && (s->modifiers & 2) && 386 !(s->imodifiers & 0x20)) { 387 QUEUE_KEY(0x36 | 0x80); 388 s->imodifiers |= 0x20; 389 } 390 } 391 #endif 392 } 393 394 QUEUE_KEY((code & 0x7f) | (keycode & 0x80)); 395 } 396 397 static void spitz_keyboard_tick(void *opaque) 398 { 399 SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; 400 401 if (s->fifolen) { 402 spitz_keyboard_keydown(s, s->fifo[s->fifopos ++]); 403 s->fifolen --; 404 if (s->fifopos >= 16) 405 s->fifopos = 0; 406 } 407 408 timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 409 NANOSECONDS_PER_SECOND / 32); 410 } 411 412 static void spitz_keyboard_pre_map(SpitzKeyboardState *s) 413 { 414 int i; 415 for (i = 0; i < 0x100; i ++) 416 s->pre_map[i] = i; 417 s->pre_map[0x02 | SPITZ_MOD_SHIFT] = 0x02 | SPITZ_MOD_SHIFT; /* exclam */ 418 s->pre_map[0x28 | SPITZ_MOD_SHIFT] = 0x03 | SPITZ_MOD_SHIFT; /* quotedbl */ 419 s->pre_map[0x04 | SPITZ_MOD_SHIFT] = 0x04 | SPITZ_MOD_SHIFT; /* # */ 420 s->pre_map[0x05 | SPITZ_MOD_SHIFT] = 0x05 | SPITZ_MOD_SHIFT; /* dollar */ 421 s->pre_map[0x06 | SPITZ_MOD_SHIFT] = 0x06 | SPITZ_MOD_SHIFT; /* percent */ 422 s->pre_map[0x08 | SPITZ_MOD_SHIFT] = 0x07 | SPITZ_MOD_SHIFT; /* ampersand */ 423 s->pre_map[0x28] = 0x08 | SPITZ_MOD_SHIFT; /* ' */ 424 s->pre_map[0x0a | SPITZ_MOD_SHIFT] = 0x09 | SPITZ_MOD_SHIFT; /* ( */ 425 s->pre_map[0x0b | SPITZ_MOD_SHIFT] = 0x0a | SPITZ_MOD_SHIFT; /* ) */ 426 s->pre_map[0x29 | SPITZ_MOD_SHIFT] = 0x0b | SPITZ_MOD_SHIFT; /* tilde */ 427 s->pre_map[0x03 | SPITZ_MOD_SHIFT] = 0x0c | SPITZ_MOD_SHIFT; /* at */ 428 s->pre_map[0xd3] = 0x0e | SPITZ_MOD_FN; /* Delete */ 429 s->pre_map[0x3a] = 0x0f | SPITZ_MOD_FN; /* Caps_Lock */ 430 s->pre_map[0x07 | SPITZ_MOD_SHIFT] = 0x11 | SPITZ_MOD_FN; /* ^ */ 431 s->pre_map[0x0d] = 0x12 | SPITZ_MOD_FN; /* equal */ 432 s->pre_map[0x0d | SPITZ_MOD_SHIFT] = 0x13 | SPITZ_MOD_FN; /* plus */ 433 s->pre_map[0x1a] = 0x14 | SPITZ_MOD_FN; /* [ */ 434 s->pre_map[0x1b] = 0x15 | SPITZ_MOD_FN; /* ] */ 435 s->pre_map[0x1a | SPITZ_MOD_SHIFT] = 0x16 | SPITZ_MOD_FN; /* { */ 436 s->pre_map[0x1b | SPITZ_MOD_SHIFT] = 0x17 | SPITZ_MOD_FN; /* } */ 437 s->pre_map[0x27] = 0x22 | SPITZ_MOD_FN; /* semicolon */ 438 s->pre_map[0x27 | SPITZ_MOD_SHIFT] = 0x23 | SPITZ_MOD_FN; /* colon */ 439 s->pre_map[0x09 | SPITZ_MOD_SHIFT] = 0x24 | SPITZ_MOD_FN; /* asterisk */ 440 s->pre_map[0x2b] = 0x25 | SPITZ_MOD_FN; /* backslash */ 441 s->pre_map[0x2b | SPITZ_MOD_SHIFT] = 0x26 | SPITZ_MOD_FN; /* bar */ 442 s->pre_map[0x0c | SPITZ_MOD_SHIFT] = 0x30 | SPITZ_MOD_FN; /* _ */ 443 s->pre_map[0x33 | SPITZ_MOD_SHIFT] = 0x33 | SPITZ_MOD_FN; /* less */ 444 s->pre_map[0x35] = 0x33 | SPITZ_MOD_SHIFT; /* slash */ 445 s->pre_map[0x34 | SPITZ_MOD_SHIFT] = 0x34 | SPITZ_MOD_FN; /* greater */ 446 s->pre_map[0x35 | SPITZ_MOD_SHIFT] = 0x34 | SPITZ_MOD_SHIFT; /* question */ 447 s->pre_map[0x49] = 0x48 | SPITZ_MOD_FN; /* Page_Up */ 448 s->pre_map[0x51] = 0x50 | SPITZ_MOD_FN; /* Page_Down */ 449 450 s->modifiers = 0; 451 s->imodifiers = 0; 452 s->fifopos = 0; 453 s->fifolen = 0; 454 } 455 456 #undef SPITZ_MOD_SHIFT 457 #undef SPITZ_MOD_CTRL 458 #undef SPITZ_MOD_FN 459 460 static int spitz_keyboard_post_load(void *opaque, int version_id) 461 { 462 SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; 463 464 /* Release all pressed keys */ 465 memset(s->keyrow, 0, sizeof(s->keyrow)); 466 spitz_keyboard_sense_update(s); 467 s->modifiers = 0; 468 s->imodifiers = 0; 469 s->fifopos = 0; 470 s->fifolen = 0; 471 472 return 0; 473 } 474 475 static void spitz_keyboard_register(PXA2xxState *cpu) 476 { 477 int i; 478 DeviceState *dev; 479 SpitzKeyboardState *s; 480 481 dev = sysbus_create_simple(TYPE_SPITZ_KEYBOARD, -1, NULL); 482 s = SPITZ_KEYBOARD(dev); 483 484 for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) 485 qdev_connect_gpio_out(dev, i, qdev_get_gpio_in(cpu->gpio, spitz_gpio_key_sense[i])); 486 487 for (i = 0; i < 5; i ++) 488 s->gpiomap[i] = qdev_get_gpio_in(cpu->gpio, spitz_gpiomap[i]); 489 490 if (!graphic_rotate) 491 s->gpiomap[4] = qemu_irq_invert(s->gpiomap[4]); 492 493 for (i = 0; i < 5; i++) 494 qemu_set_irq(s->gpiomap[i], 0); 495 496 for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++) 497 qdev_connect_gpio_out(cpu->gpio, spitz_gpio_key_strobe[i], 498 qdev_get_gpio_in(dev, i)); 499 500 timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); 501 502 qemu_add_kbd_event_handler(spitz_keyboard_handler, s); 503 } 504 505 static void spitz_keyboard_init(Object *obj) 506 { 507 DeviceState *dev = DEVICE(obj); 508 SpitzKeyboardState *s = SPITZ_KEYBOARD(obj); 509 int i, j; 510 511 for (i = 0; i < 0x80; i ++) 512 s->keymap[i] = -1; 513 for (i = 0; i < SPITZ_KEY_SENSE_NUM + 1; i ++) 514 for (j = 0; j < SPITZ_KEY_STROBE_NUM; j ++) 515 if (spitz_keymap[i][j] != -1) 516 s->keymap[spitz_keymap[i][j]] = (i << 4) | j; 517 518 spitz_keyboard_pre_map(s); 519 520 s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); 521 qdev_init_gpio_in(dev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM); 522 qdev_init_gpio_out(dev, s->sense, SPITZ_KEY_SENSE_NUM); 523 } 524 525 /* LCD backlight controller */ 526 527 #define LCDTG_RESCTL 0x00 528 #define LCDTG_PHACTRL 0x01 529 #define LCDTG_DUTYCTRL 0x02 530 #define LCDTG_POWERREG0 0x03 531 #define LCDTG_POWERREG1 0x04 532 #define LCDTG_GPOR3 0x05 533 #define LCDTG_PICTRL 0x06 534 #define LCDTG_POLCTRL 0x07 535 536 typedef struct { 537 SSISlave ssidev; 538 uint32_t bl_intensity; 539 uint32_t bl_power; 540 } SpitzLCDTG; 541 542 static void spitz_bl_update(SpitzLCDTG *s) 543 { 544 if (s->bl_power && s->bl_intensity) 545 zaurus_printf("LCD Backlight now at %i/63\n", s->bl_intensity); 546 else 547 zaurus_printf("LCD Backlight now off\n"); 548 } 549 550 /* FIXME: Implement GPIO properly and remove this hack. */ 551 static SpitzLCDTG *spitz_lcdtg; 552 553 static inline void spitz_bl_bit5(void *opaque, int line, int level) 554 { 555 SpitzLCDTG *s = spitz_lcdtg; 556 int prev = s->bl_intensity; 557 558 if (level) 559 s->bl_intensity &= ~0x20; 560 else 561 s->bl_intensity |= 0x20; 562 563 if (s->bl_power && prev != s->bl_intensity) 564 spitz_bl_update(s); 565 } 566 567 static inline void spitz_bl_power(void *opaque, int line, int level) 568 { 569 SpitzLCDTG *s = spitz_lcdtg; 570 s->bl_power = !!level; 571 spitz_bl_update(s); 572 } 573 574 static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) 575 { 576 SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); 577 int addr; 578 addr = value >> 5; 579 value &= 0x1f; 580 581 switch (addr) { 582 case LCDTG_RESCTL: 583 if (value) 584 zaurus_printf("LCD in QVGA mode\n"); 585 else 586 zaurus_printf("LCD in VGA mode\n"); 587 break; 588 589 case LCDTG_DUTYCTRL: 590 s->bl_intensity &= ~0x1f; 591 s->bl_intensity |= value; 592 if (s->bl_power) 593 spitz_bl_update(s); 594 break; 595 596 case LCDTG_POWERREG0: 597 /* Set common voltage to M62332FP */ 598 break; 599 } 600 return 0; 601 } 602 603 static void spitz_lcdtg_realize(SSISlave *dev, Error **errp) 604 { 605 SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); 606 607 spitz_lcdtg = s; 608 s->bl_power = 0; 609 s->bl_intensity = 0x20; 610 } 611 612 /* SSP devices */ 613 614 #define CORGI_SSP_PORT 2 615 616 #define SPITZ_GPIO_LCDCON_CS 53 617 #define SPITZ_GPIO_ADS7846_CS 14 618 #define SPITZ_GPIO_MAX1111_CS 20 619 #define SPITZ_GPIO_TP_INT 11 620 621 static DeviceState *max1111; 622 623 /* "Demux" the signal based on current chipselect */ 624 typedef struct { 625 SSISlave ssidev; 626 SSIBus *bus[3]; 627 uint32_t enable[3]; 628 } CorgiSSPState; 629 630 static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value) 631 { 632 CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev); 633 int i; 634 635 for (i = 0; i < 3; i++) { 636 if (s->enable[i]) { 637 return ssi_transfer(s->bus[i], value); 638 } 639 } 640 return 0; 641 } 642 643 static void corgi_ssp_gpio_cs(void *opaque, int line, int level) 644 { 645 CorgiSSPState *s = (CorgiSSPState *)opaque; 646 assert(line >= 0 && line < 3); 647 s->enable[line] = !level; 648 } 649 650 #define MAX1111_BATT_VOLT 1 651 #define MAX1111_BATT_TEMP 2 652 #define MAX1111_ACIN_VOLT 3 653 654 #define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ 655 #define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ 656 #define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ 657 658 static void spitz_adc_temp_on(void *opaque, int line, int level) 659 { 660 if (!max1111) 661 return; 662 663 if (level) 664 max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP); 665 else 666 max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); 667 } 668 669 static void corgi_ssp_realize(SSISlave *d, Error **errp) 670 { 671 DeviceState *dev = DEVICE(d); 672 CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, d); 673 674 qdev_init_gpio_in(dev, corgi_ssp_gpio_cs, 3); 675 s->bus[0] = ssi_create_bus(dev, "ssi0"); 676 s->bus[1] = ssi_create_bus(dev, "ssi1"); 677 s->bus[2] = ssi_create_bus(dev, "ssi2"); 678 } 679 680 static void spitz_ssp_attach(PXA2xxState *cpu) 681 { 682 DeviceState *mux; 683 DeviceState *dev; 684 void *bus; 685 686 mux = ssi_create_slave(cpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); 687 688 bus = qdev_get_child_bus(mux, "ssi0"); 689 ssi_create_slave(bus, "spitz-lcdtg"); 690 691 bus = qdev_get_child_bus(mux, "ssi1"); 692 dev = ssi_create_slave(bus, "ads7846"); 693 qdev_connect_gpio_out(dev, 0, 694 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_TP_INT)); 695 696 bus = qdev_get_child_bus(mux, "ssi2"); 697 max1111 = ssi_create_slave(bus, "max1111"); 698 max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); 699 max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); 700 max111x_set_input(max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); 701 702 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_LCDCON_CS, 703 qdev_get_gpio_in(mux, 0)); 704 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ADS7846_CS, 705 qdev_get_gpio_in(mux, 1)); 706 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_MAX1111_CS, 707 qdev_get_gpio_in(mux, 2)); 708 } 709 710 /* CF Microdrive */ 711 712 static void spitz_microdrive_attach(PXA2xxState *cpu, int slot) 713 { 714 PCMCIACardState *md; 715 DriveInfo *dinfo; 716 717 dinfo = drive_get(IF_IDE, 0, 0); 718 if (!dinfo || dinfo->media_cd) 719 return; 720 md = dscm1xxxx_init(dinfo); 721 pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md); 722 } 723 724 /* Wm8750 and Max7310 on I2C */ 725 726 #define AKITA_MAX_ADDR 0x18 727 #define SPITZ_WM_ADDRL 0x1b 728 #define SPITZ_WM_ADDRH 0x1a 729 730 #define SPITZ_GPIO_WM 5 731 732 static void spitz_wm8750_addr(void *opaque, int line, int level) 733 { 734 I2CSlave *wm = (I2CSlave *) opaque; 735 if (level) 736 i2c_set_slave_address(wm, SPITZ_WM_ADDRH); 737 else 738 i2c_set_slave_address(wm, SPITZ_WM_ADDRL); 739 } 740 741 static void spitz_i2c_setup(PXA2xxState *cpu) 742 { 743 /* Attach the CPU on one end of our I2C bus. */ 744 I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]); 745 746 DeviceState *wm; 747 748 /* Attach a WM8750 to the bus */ 749 wm = i2c_create_slave(bus, TYPE_WM8750, 0); 750 751 spitz_wm8750_addr(wm, 0, 0); 752 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM, 753 qemu_allocate_irq(spitz_wm8750_addr, wm, 0)); 754 /* .. and to the sound interface. */ 755 cpu->i2s->opaque = wm; 756 cpu->i2s->codec_out = wm8750_dac_dat; 757 cpu->i2s->codec_in = wm8750_adc_dat; 758 wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s); 759 } 760 761 static void spitz_akita_i2c_setup(PXA2xxState *cpu) 762 { 763 /* Attach a Max7310 to Akita I2C bus. */ 764 i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310", 765 AKITA_MAX_ADDR); 766 } 767 768 /* Other peripherals */ 769 770 static void spitz_out_switch(void *opaque, int line, int level) 771 { 772 switch (line) { 773 case 0: 774 zaurus_printf("Charging %s.\n", level ? "off" : "on"); 775 break; 776 case 1: 777 zaurus_printf("Discharging %s.\n", level ? "on" : "off"); 778 break; 779 case 2: 780 zaurus_printf("Green LED %s.\n", level ? "on" : "off"); 781 break; 782 case 3: 783 zaurus_printf("Orange LED %s.\n", level ? "on" : "off"); 784 break; 785 case 4: 786 spitz_bl_bit5(opaque, line, level); 787 break; 788 case 5: 789 spitz_bl_power(opaque, line, level); 790 break; 791 case 6: 792 spitz_adc_temp_on(opaque, line, level); 793 break; 794 } 795 } 796 797 #define SPITZ_SCP_LED_GREEN 1 798 #define SPITZ_SCP_JK_B 2 799 #define SPITZ_SCP_CHRG_ON 3 800 #define SPITZ_SCP_MUTE_L 4 801 #define SPITZ_SCP_MUTE_R 5 802 #define SPITZ_SCP_CF_POWER 6 803 #define SPITZ_SCP_LED_ORANGE 7 804 #define SPITZ_SCP_JK_A 8 805 #define SPITZ_SCP_ADC_TEMP_ON 9 806 #define SPITZ_SCP2_IR_ON 1 807 #define SPITZ_SCP2_AKIN_PULLUP 2 808 #define SPITZ_SCP2_BACKLIGHT_CONT 7 809 #define SPITZ_SCP2_BACKLIGHT_ON 8 810 #define SPITZ_SCP2_MIC_BIAS 9 811 812 static void spitz_scoop_gpio_setup(PXA2xxState *cpu, 813 DeviceState *scp0, DeviceState *scp1) 814 { 815 qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8); 816 817 qdev_connect_gpio_out(scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); 818 qdev_connect_gpio_out(scp0, SPITZ_SCP_JK_B, outsignals[1]); 819 qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); 820 qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); 821 822 if (scp1) { 823 qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]); 824 qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]); 825 } 826 827 qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); 828 } 829 830 #define SPITZ_GPIO_HSYNC 22 831 #define SPITZ_GPIO_SD_DETECT 9 832 #define SPITZ_GPIO_SD_WP 81 833 #define SPITZ_GPIO_ON_RESET 89 834 #define SPITZ_GPIO_BAT_COVER 90 835 #define SPITZ_GPIO_CF1_IRQ 105 836 #define SPITZ_GPIO_CF1_CD 94 837 #define SPITZ_GPIO_CF2_IRQ 106 838 #define SPITZ_GPIO_CF2_CD 93 839 840 static int spitz_hsync; 841 842 static void spitz_lcd_hsync_handler(void *opaque, int line, int level) 843 { 844 PXA2xxState *cpu = (PXA2xxState *) opaque; 845 qemu_set_irq(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_HSYNC), spitz_hsync); 846 spitz_hsync ^= 1; 847 } 848 849 static void spitz_reset(void *opaque, int line, int level) 850 { 851 if (level) { 852 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 853 } 854 } 855 856 static void spitz_gpio_setup(PXA2xxState *cpu, int slots) 857 { 858 qemu_irq lcd_hsync; 859 qemu_irq reset; 860 861 /* 862 * Bad hack: We toggle the LCD hsync GPIO on every GPIO status 863 * read to satisfy broken guests that poll-wait for hsync. 864 * Simulating a real hsync event would be less practical and 865 * wouldn't guarantee that a guest ever exits the loop. 866 */ 867 spitz_hsync = 0; 868 lcd_hsync = qemu_allocate_irq(spitz_lcd_hsync_handler, cpu, 0); 869 pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync); 870 pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync); 871 872 /* MMC/SD host */ 873 pxa2xx_mmci_handlers(cpu->mmc, 874 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_WP), 875 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_DETECT)); 876 877 /* Battery lock always closed */ 878 qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_BAT_COVER)); 879 880 /* Handle reset */ 881 reset = qemu_allocate_irq(spitz_reset, cpu, 0); 882 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ON_RESET, reset); 883 884 /* PCMCIA signals: card's IRQ and Card-Detect */ 885 if (slots >= 1) 886 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0], 887 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_IRQ), 888 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_CD)); 889 if (slots >= 2) 890 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1], 891 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_IRQ), 892 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_CD)); 893 } 894 895 /* Board init. */ 896 enum spitz_model_e { spitz, akita, borzoi, terrier }; 897 898 #define SPITZ_RAM 0x04000000 899 #define SPITZ_ROM 0x00800000 900 901 static struct arm_boot_info spitz_binfo = { 902 .loader_start = PXA2XX_SDRAM_BASE, 903 .ram_size = 0x04000000, 904 }; 905 906 static void spitz_common_init(MachineState *machine, 907 enum spitz_model_e model, int arm_id) 908 { 909 PXA2xxState *mpu; 910 DeviceState *scp0, *scp1 = NULL; 911 MemoryRegion *address_space_mem = get_system_memory(); 912 MemoryRegion *rom = g_new(MemoryRegion, 1); 913 914 /* Setup CPU & memory */ 915 mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, 916 machine->cpu_type); 917 918 sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); 919 920 memory_region_init_ram(rom, NULL, "spitz.rom", SPITZ_ROM, &error_fatal); 921 memory_region_set_readonly(rom, true); 922 memory_region_add_subregion(address_space_mem, 0, rom); 923 924 /* Setup peripherals */ 925 spitz_keyboard_register(mpu); 926 927 spitz_ssp_attach(mpu); 928 929 scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); 930 if (model != akita) { 931 scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); 932 } 933 934 spitz_scoop_gpio_setup(mpu, scp0, scp1); 935 936 spitz_gpio_setup(mpu, (model == akita) ? 1 : 2); 937 938 spitz_i2c_setup(mpu); 939 940 if (model == akita) 941 spitz_akita_i2c_setup(mpu); 942 943 if (model == terrier) 944 /* A 6.0 GB microdrive is permanently sitting in CF slot 1. */ 945 spitz_microdrive_attach(mpu, 1); 946 else if (model != akita) 947 /* A 4.0 GB microdrive is permanently sitting in CF slot 0. */ 948 spitz_microdrive_attach(mpu, 0); 949 950 spitz_binfo.kernel_filename = machine->kernel_filename; 951 spitz_binfo.kernel_cmdline = machine->kernel_cmdline; 952 spitz_binfo.initrd_filename = machine->initrd_filename; 953 spitz_binfo.board_id = arm_id; 954 arm_load_kernel(mpu->cpu, &spitz_binfo); 955 sl_bootparam_write(SL_PXA_PARAM_BASE); 956 } 957 958 static void spitz_init(MachineState *machine) 959 { 960 spitz_common_init(machine, spitz, 0x2c9); 961 } 962 963 static void borzoi_init(MachineState *machine) 964 { 965 spitz_common_init(machine, borzoi, 0x33f); 966 } 967 968 static void akita_init(MachineState *machine) 969 { 970 spitz_common_init(machine, akita, 0x2e8); 971 } 972 973 static void terrier_init(MachineState *machine) 974 { 975 spitz_common_init(machine, terrier, 0x33f); 976 } 977 978 static void akitapda_class_init(ObjectClass *oc, void *data) 979 { 980 MachineClass *mc = MACHINE_CLASS(oc); 981 982 mc->desc = "Sharp SL-C1000 (Akita) PDA (PXA270)"; 983 mc->init = akita_init; 984 mc->ignore_memory_transaction_failures = true; 985 mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); 986 } 987 988 static const TypeInfo akitapda_type = { 989 .name = MACHINE_TYPE_NAME("akita"), 990 .parent = TYPE_MACHINE, 991 .class_init = akitapda_class_init, 992 }; 993 994 static void spitzpda_class_init(ObjectClass *oc, void *data) 995 { 996 MachineClass *mc = MACHINE_CLASS(oc); 997 998 mc->desc = "Sharp SL-C3000 (Spitz) PDA (PXA270)"; 999 mc->init = spitz_init; 1000 mc->block_default_type = IF_IDE; 1001 mc->ignore_memory_transaction_failures = true; 1002 mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); 1003 } 1004 1005 static const TypeInfo spitzpda_type = { 1006 .name = MACHINE_TYPE_NAME("spitz"), 1007 .parent = TYPE_MACHINE, 1008 .class_init = spitzpda_class_init, 1009 }; 1010 1011 static void borzoipda_class_init(ObjectClass *oc, void *data) 1012 { 1013 MachineClass *mc = MACHINE_CLASS(oc); 1014 1015 mc->desc = "Sharp SL-C3100 (Borzoi) PDA (PXA270)"; 1016 mc->init = borzoi_init; 1017 mc->block_default_type = IF_IDE; 1018 mc->ignore_memory_transaction_failures = true; 1019 mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); 1020 } 1021 1022 static const TypeInfo borzoipda_type = { 1023 .name = MACHINE_TYPE_NAME("borzoi"), 1024 .parent = TYPE_MACHINE, 1025 .class_init = borzoipda_class_init, 1026 }; 1027 1028 static void terrierpda_class_init(ObjectClass *oc, void *data) 1029 { 1030 MachineClass *mc = MACHINE_CLASS(oc); 1031 1032 mc->desc = "Sharp SL-C3200 (Terrier) PDA (PXA270)"; 1033 mc->init = terrier_init; 1034 mc->block_default_type = IF_IDE; 1035 mc->ignore_memory_transaction_failures = true; 1036 mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c5"); 1037 } 1038 1039 static const TypeInfo terrierpda_type = { 1040 .name = MACHINE_TYPE_NAME("terrier"), 1041 .parent = TYPE_MACHINE, 1042 .class_init = terrierpda_class_init, 1043 }; 1044 1045 static void spitz_machine_init(void) 1046 { 1047 type_register_static(&akitapda_type); 1048 type_register_static(&spitzpda_type); 1049 type_register_static(&borzoipda_type); 1050 type_register_static(&terrierpda_type); 1051 } 1052 1053 type_init(spitz_machine_init) 1054 1055 static bool is_version_0(void *opaque, int version_id) 1056 { 1057 return version_id == 0; 1058 } 1059 1060 static VMStateDescription vmstate_sl_nand_info = { 1061 .name = "sl-nand", 1062 .version_id = 0, 1063 .minimum_version_id = 0, 1064 .fields = (VMStateField[]) { 1065 VMSTATE_UINT8(ctl, SLNANDState), 1066 VMSTATE_STRUCT(ecc, SLNANDState, 0, vmstate_ecc_state, ECCState), 1067 VMSTATE_END_OF_LIST(), 1068 }, 1069 }; 1070 1071 static Property sl_nand_properties[] = { 1072 DEFINE_PROP_UINT8("manf_id", SLNANDState, manf_id, NAND_MFR_SAMSUNG), 1073 DEFINE_PROP_UINT8("chip_id", SLNANDState, chip_id, 0xf1), 1074 DEFINE_PROP_END_OF_LIST(), 1075 }; 1076 1077 static void sl_nand_class_init(ObjectClass *klass, void *data) 1078 { 1079 DeviceClass *dc = DEVICE_CLASS(klass); 1080 1081 dc->vmsd = &vmstate_sl_nand_info; 1082 dc->props = sl_nand_properties; 1083 /* Reason: init() method uses drive_get() */ 1084 dc->user_creatable = false; 1085 } 1086 1087 static const TypeInfo sl_nand_info = { 1088 .name = TYPE_SL_NAND, 1089 .parent = TYPE_SYS_BUS_DEVICE, 1090 .instance_size = sizeof(SLNANDState), 1091 .instance_init = sl_nand_init, 1092 .class_init = sl_nand_class_init, 1093 }; 1094 1095 static VMStateDescription vmstate_spitz_kbd = { 1096 .name = "spitz-keyboard", 1097 .version_id = 1, 1098 .minimum_version_id = 0, 1099 .post_load = spitz_keyboard_post_load, 1100 .fields = (VMStateField[]) { 1101 VMSTATE_UINT16(sense_state, SpitzKeyboardState), 1102 VMSTATE_UINT16(strobe_state, SpitzKeyboardState), 1103 VMSTATE_UNUSED_TEST(is_version_0, 5), 1104 VMSTATE_END_OF_LIST(), 1105 }, 1106 }; 1107 1108 static void spitz_keyboard_class_init(ObjectClass *klass, void *data) 1109 { 1110 DeviceClass *dc = DEVICE_CLASS(klass); 1111 1112 dc->vmsd = &vmstate_spitz_kbd; 1113 } 1114 1115 static const TypeInfo spitz_keyboard_info = { 1116 .name = TYPE_SPITZ_KEYBOARD, 1117 .parent = TYPE_SYS_BUS_DEVICE, 1118 .instance_size = sizeof(SpitzKeyboardState), 1119 .instance_init = spitz_keyboard_init, 1120 .class_init = spitz_keyboard_class_init, 1121 }; 1122 1123 static const VMStateDescription vmstate_corgi_ssp_regs = { 1124 .name = "corgi-ssp", 1125 .version_id = 2, 1126 .minimum_version_id = 2, 1127 .fields = (VMStateField[]) { 1128 VMSTATE_SSI_SLAVE(ssidev, CorgiSSPState), 1129 VMSTATE_UINT32_ARRAY(enable, CorgiSSPState, 3), 1130 VMSTATE_END_OF_LIST(), 1131 } 1132 }; 1133 1134 static void corgi_ssp_class_init(ObjectClass *klass, void *data) 1135 { 1136 DeviceClass *dc = DEVICE_CLASS(klass); 1137 SSISlaveClass *k = SSI_SLAVE_CLASS(klass); 1138 1139 k->realize = corgi_ssp_realize; 1140 k->transfer = corgi_ssp_transfer; 1141 dc->vmsd = &vmstate_corgi_ssp_regs; 1142 } 1143 1144 static const TypeInfo corgi_ssp_info = { 1145 .name = "corgi-ssp", 1146 .parent = TYPE_SSI_SLAVE, 1147 .instance_size = sizeof(CorgiSSPState), 1148 .class_init = corgi_ssp_class_init, 1149 }; 1150 1151 static const VMStateDescription vmstate_spitz_lcdtg_regs = { 1152 .name = "spitz-lcdtg", 1153 .version_id = 1, 1154 .minimum_version_id = 1, 1155 .fields = (VMStateField[]) { 1156 VMSTATE_SSI_SLAVE(ssidev, SpitzLCDTG), 1157 VMSTATE_UINT32(bl_intensity, SpitzLCDTG), 1158 VMSTATE_UINT32(bl_power, SpitzLCDTG), 1159 VMSTATE_END_OF_LIST(), 1160 } 1161 }; 1162 1163 static void spitz_lcdtg_class_init(ObjectClass *klass, void *data) 1164 { 1165 DeviceClass *dc = DEVICE_CLASS(klass); 1166 SSISlaveClass *k = SSI_SLAVE_CLASS(klass); 1167 1168 k->realize = spitz_lcdtg_realize; 1169 k->transfer = spitz_lcdtg_transfer; 1170 dc->vmsd = &vmstate_spitz_lcdtg_regs; 1171 } 1172 1173 static const TypeInfo spitz_lcdtg_info = { 1174 .name = "spitz-lcdtg", 1175 .parent = TYPE_SSI_SLAVE, 1176 .instance_size = sizeof(SpitzLCDTG), 1177 .class_init = spitz_lcdtg_class_init, 1178 }; 1179 1180 static void spitz_register_types(void) 1181 { 1182 type_register_static(&corgi_ssp_info); 1183 type_register_static(&spitz_lcdtg_info); 1184 type_register_static(&spitz_keyboard_info); 1185 type_register_static(&sl_nand_info); 1186 } 1187 1188 type_init(spitz_register_types) 1189