1 /* 2 * PXA270-based Clamshell PDA platforms. 3 * 4 * Copyright (c) 2006 Openedhand Ltd. 5 * Written by Andrzej Zaborowski <balrog@zabor.org> 6 * 7 * This code is licensed under the GNU GPL v2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "hw/hw.h" 14 #include "hw/arm/pxa.h" 15 #include "hw/arm/arm.h" 16 #include "sysemu/sysemu.h" 17 #include "hw/pcmcia.h" 18 #include "hw/i2c/i2c.h" 19 #include "hw/ssi.h" 20 #include "hw/block/flash.h" 21 #include "qemu/timer.h" 22 #include "hw/devices.h" 23 #include "hw/arm/sharpsl.h" 24 #include "ui/console.h" 25 #include "audio/audio.h" 26 #include "hw/boards.h" 27 #include "sysemu/block-backend.h" 28 #include "hw/sysbus.h" 29 #include "exec/address-spaces.h" 30 31 #undef REG_FMT 32 #define REG_FMT "0x%02lx" 33 34 /* Spitz Flash */ 35 #define FLASH_BASE 0x0c000000 36 #define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ 37 #define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ 38 #define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ 39 #define FLASH_ECCCNTR 0x0c /* ECC byte counter */ 40 #define FLASH_ECCCLRR 0x10 /* Clear ECC */ 41 #define FLASH_FLASHIO 0x14 /* Flash I/O */ 42 #define FLASH_FLASHCTL 0x18 /* Flash Control */ 43 44 #define FLASHCTL_CE0 (1 << 0) 45 #define FLASHCTL_CLE (1 << 1) 46 #define FLASHCTL_ALE (1 << 2) 47 #define FLASHCTL_WP (1 << 3) 48 #define FLASHCTL_CE1 (1 << 4) 49 #define FLASHCTL_RYBY (1 << 5) 50 #define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) 51 52 #define TYPE_SL_NAND "sl-nand" 53 #define SL_NAND(obj) OBJECT_CHECK(SLNANDState, (obj), TYPE_SL_NAND) 54 55 typedef struct { 56 SysBusDevice parent_obj; 57 58 MemoryRegion iomem; 59 DeviceState *nand; 60 uint8_t ctl; 61 uint8_t manf_id; 62 uint8_t chip_id; 63 ECCState ecc; 64 } SLNANDState; 65 66 static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) 67 { 68 SLNANDState *s = (SLNANDState *) opaque; 69 int ryby; 70 71 switch (addr) { 72 #define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) 73 case FLASH_ECCLPLB: 74 return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) | 75 BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7); 76 77 #define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) 78 case FLASH_ECCLPUB: 79 return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) | 80 BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7); 81 82 case FLASH_ECCCP: 83 return s->ecc.cp; 84 85 case FLASH_ECCCNTR: 86 return s->ecc.count & 0xff; 87 88 case FLASH_FLASHCTL: 89 nand_getpins(s->nand, &ryby); 90 if (ryby) 91 return s->ctl | FLASHCTL_RYBY; 92 else 93 return s->ctl; 94 95 case FLASH_FLASHIO: 96 if (size == 4) { 97 return ecc_digest(&s->ecc, nand_getio(s->nand)) | 98 (ecc_digest(&s->ecc, nand_getio(s->nand)) << 16); 99 } 100 return ecc_digest(&s->ecc, nand_getio(s->nand)); 101 102 default: 103 zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); 104 } 105 return 0; 106 } 107 108 static void sl_write(void *opaque, hwaddr addr, 109 uint64_t value, unsigned size) 110 { 111 SLNANDState *s = (SLNANDState *) opaque; 112 113 switch (addr) { 114 case FLASH_ECCCLRR: 115 /* Value is ignored. */ 116 ecc_reset(&s->ecc); 117 break; 118 119 case FLASH_FLASHCTL: 120 s->ctl = value & 0xff & ~FLASHCTL_RYBY; 121 nand_setpins(s->nand, 122 s->ctl & FLASHCTL_CLE, 123 s->ctl & FLASHCTL_ALE, 124 s->ctl & FLASHCTL_NCE, 125 s->ctl & FLASHCTL_WP, 126 0); 127 break; 128 129 case FLASH_FLASHIO: 130 nand_setio(s->nand, ecc_digest(&s->ecc, value & 0xff)); 131 break; 132 133 default: 134 zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); 135 } 136 } 137 138 enum { 139 FLASH_128M, 140 FLASH_1024M, 141 }; 142 143 static const MemoryRegionOps sl_ops = { 144 .read = sl_read, 145 .write = sl_write, 146 .endianness = DEVICE_NATIVE_ENDIAN, 147 }; 148 149 static void sl_flash_register(PXA2xxState *cpu, int size) 150 { 151 DeviceState *dev; 152 153 dev = qdev_create(NULL, TYPE_SL_NAND); 154 155 qdev_prop_set_uint8(dev, "manf_id", NAND_MFR_SAMSUNG); 156 if (size == FLASH_128M) 157 qdev_prop_set_uint8(dev, "chip_id", 0x73); 158 else if (size == FLASH_1024M) 159 qdev_prop_set_uint8(dev, "chip_id", 0xf1); 160 161 qdev_init_nofail(dev); 162 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, FLASH_BASE); 163 } 164 165 static int sl_nand_init(SysBusDevice *dev) 166 { 167 SLNANDState *s = SL_NAND(dev); 168 DriveInfo *nand; 169 170 s->ctl = 0; 171 /* FIXME use a qdev drive property instead of drive_get() */ 172 nand = drive_get(IF_MTD, 0, 0); 173 s->nand = nand_init(nand ? blk_by_legacy_dinfo(nand) : NULL, 174 s->manf_id, s->chip_id); 175 176 memory_region_init_io(&s->iomem, OBJECT(s), &sl_ops, s, "sl", 0x40); 177 sysbus_init_mmio(dev, &s->iomem); 178 179 return 0; 180 } 181 182 /* Spitz Keyboard */ 183 184 #define SPITZ_KEY_STROBE_NUM 11 185 #define SPITZ_KEY_SENSE_NUM 7 186 187 static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = { 188 12, 17, 91, 34, 36, 38, 39 189 }; 190 191 static const int spitz_gpio_key_strobe[SPITZ_KEY_STROBE_NUM] = { 192 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 193 }; 194 195 /* Eighth additional row maps the special keys */ 196 static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = { 197 { 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 }, 198 { -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 }, 199 { 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25, -1 , -1 , -1 }, 200 { 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26, -1 , 0x36, -1 }, 201 { 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34, -1 , 0x1c, 0x2a, -1 }, 202 { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33, -1 , 0x48, -1 , -1 , 0x38 }, 203 { 0x37, 0x3d, -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d, -1 , -1 }, 204 { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 }, 205 }; 206 207 #define SPITZ_GPIO_AK_INT 13 /* Remote control */ 208 #define SPITZ_GPIO_SYNC 16 /* Sync button */ 209 #define SPITZ_GPIO_ON_KEY 95 /* Power button */ 210 #define SPITZ_GPIO_SWA 97 /* Lid */ 211 #define SPITZ_GPIO_SWB 96 /* Tablet mode */ 212 213 /* The special buttons are mapped to unused keys */ 214 static const int spitz_gpiomap[5] = { 215 SPITZ_GPIO_AK_INT, SPITZ_GPIO_SYNC, SPITZ_GPIO_ON_KEY, 216 SPITZ_GPIO_SWA, SPITZ_GPIO_SWB, 217 }; 218 219 #define TYPE_SPITZ_KEYBOARD "spitz-keyboard" 220 #define SPITZ_KEYBOARD(obj) \ 221 OBJECT_CHECK(SpitzKeyboardState, (obj), TYPE_SPITZ_KEYBOARD) 222 223 typedef struct { 224 SysBusDevice parent_obj; 225 226 qemu_irq sense[SPITZ_KEY_SENSE_NUM]; 227 qemu_irq gpiomap[5]; 228 int keymap[0x80]; 229 uint16_t keyrow[SPITZ_KEY_SENSE_NUM]; 230 uint16_t strobe_state; 231 uint16_t sense_state; 232 233 uint16_t pre_map[0x100]; 234 uint16_t modifiers; 235 uint16_t imodifiers; 236 uint8_t fifo[16]; 237 int fifopos, fifolen; 238 QEMUTimer *kbdtimer; 239 } SpitzKeyboardState; 240 241 static void spitz_keyboard_sense_update(SpitzKeyboardState *s) 242 { 243 int i; 244 uint16_t strobe, sense = 0; 245 for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) { 246 strobe = s->keyrow[i] & s->strobe_state; 247 if (strobe) { 248 sense |= 1 << i; 249 if (!(s->sense_state & (1 << i))) 250 qemu_irq_raise(s->sense[i]); 251 } else if (s->sense_state & (1 << i)) 252 qemu_irq_lower(s->sense[i]); 253 } 254 255 s->sense_state = sense; 256 } 257 258 static void spitz_keyboard_strobe(void *opaque, int line, int level) 259 { 260 SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; 261 262 if (level) 263 s->strobe_state |= 1 << line; 264 else 265 s->strobe_state &= ~(1 << line); 266 spitz_keyboard_sense_update(s); 267 } 268 269 static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode) 270 { 271 int spitz_keycode = s->keymap[keycode & 0x7f]; 272 if (spitz_keycode == -1) 273 return; 274 275 /* Handle the additional keys */ 276 if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) { 277 qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80)); 278 return; 279 } 280 281 if (keycode & 0x80) 282 s->keyrow[spitz_keycode >> 4] &= ~(1 << (spitz_keycode & 0xf)); 283 else 284 s->keyrow[spitz_keycode >> 4] |= 1 << (spitz_keycode & 0xf); 285 286 spitz_keyboard_sense_update(s); 287 } 288 289 #define SPITZ_MOD_SHIFT (1 << 7) 290 #define SPITZ_MOD_CTRL (1 << 8) 291 #define SPITZ_MOD_FN (1 << 9) 292 293 #define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c 294 295 static void spitz_keyboard_handler(void *opaque, int keycode) 296 { 297 SpitzKeyboardState *s = opaque; 298 uint16_t code; 299 int mapcode; 300 switch (keycode) { 301 case 0x2a: /* Left Shift */ 302 s->modifiers |= 1; 303 break; 304 case 0xaa: 305 s->modifiers &= ~1; 306 break; 307 case 0x36: /* Right Shift */ 308 s->modifiers |= 2; 309 break; 310 case 0xb6: 311 s->modifiers &= ~2; 312 break; 313 case 0x1d: /* Control */ 314 s->modifiers |= 4; 315 break; 316 case 0x9d: 317 s->modifiers &= ~4; 318 break; 319 case 0x38: /* Alt */ 320 s->modifiers |= 8; 321 break; 322 case 0xb8: 323 s->modifiers &= ~8; 324 break; 325 } 326 327 code = s->pre_map[mapcode = ((s->modifiers & 3) ? 328 (keycode | SPITZ_MOD_SHIFT) : 329 (keycode & ~SPITZ_MOD_SHIFT))]; 330 331 if (code != mapcode) { 332 #if 0 333 if ((code & SPITZ_MOD_SHIFT) && !(s->modifiers & 1)) { 334 QUEUE_KEY(0x2a | (keycode & 0x80)); 335 } 336 if ((code & SPITZ_MOD_CTRL) && !(s->modifiers & 4)) { 337 QUEUE_KEY(0x1d | (keycode & 0x80)); 338 } 339 if ((code & SPITZ_MOD_FN) && !(s->modifiers & 8)) { 340 QUEUE_KEY(0x38 | (keycode & 0x80)); 341 } 342 if ((code & SPITZ_MOD_FN) && (s->modifiers & 1)) { 343 QUEUE_KEY(0x2a | (~keycode & 0x80)); 344 } 345 if ((code & SPITZ_MOD_FN) && (s->modifiers & 2)) { 346 QUEUE_KEY(0x36 | (~keycode & 0x80)); 347 } 348 #else 349 if (keycode & 0x80) { 350 if ((s->imodifiers & 1 ) && !(s->modifiers & 1)) 351 QUEUE_KEY(0x2a | 0x80); 352 if ((s->imodifiers & 4 ) && !(s->modifiers & 4)) 353 QUEUE_KEY(0x1d | 0x80); 354 if ((s->imodifiers & 8 ) && !(s->modifiers & 8)) 355 QUEUE_KEY(0x38 | 0x80); 356 if ((s->imodifiers & 0x10) && (s->modifiers & 1)) 357 QUEUE_KEY(0x2a); 358 if ((s->imodifiers & 0x20) && (s->modifiers & 2)) 359 QUEUE_KEY(0x36); 360 s->imodifiers = 0; 361 } else { 362 if ((code & SPITZ_MOD_SHIFT) && 363 !((s->modifiers | s->imodifiers) & 1)) { 364 QUEUE_KEY(0x2a); 365 s->imodifiers |= 1; 366 } 367 if ((code & SPITZ_MOD_CTRL) && 368 !((s->modifiers | s->imodifiers) & 4)) { 369 QUEUE_KEY(0x1d); 370 s->imodifiers |= 4; 371 } 372 if ((code & SPITZ_MOD_FN) && 373 !((s->modifiers | s->imodifiers) & 8)) { 374 QUEUE_KEY(0x38); 375 s->imodifiers |= 8; 376 } 377 if ((code & SPITZ_MOD_FN) && (s->modifiers & 1) && 378 !(s->imodifiers & 0x10)) { 379 QUEUE_KEY(0x2a | 0x80); 380 s->imodifiers |= 0x10; 381 } 382 if ((code & SPITZ_MOD_FN) && (s->modifiers & 2) && 383 !(s->imodifiers & 0x20)) { 384 QUEUE_KEY(0x36 | 0x80); 385 s->imodifiers |= 0x20; 386 } 387 } 388 #endif 389 } 390 391 QUEUE_KEY((code & 0x7f) | (keycode & 0x80)); 392 } 393 394 static void spitz_keyboard_tick(void *opaque) 395 { 396 SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; 397 398 if (s->fifolen) { 399 spitz_keyboard_keydown(s, s->fifo[s->fifopos ++]); 400 s->fifolen --; 401 if (s->fifopos >= 16) 402 s->fifopos = 0; 403 } 404 405 timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 406 get_ticks_per_sec() / 32); 407 } 408 409 static void spitz_keyboard_pre_map(SpitzKeyboardState *s) 410 { 411 int i; 412 for (i = 0; i < 0x100; i ++) 413 s->pre_map[i] = i; 414 s->pre_map[0x02 | SPITZ_MOD_SHIFT] = 0x02 | SPITZ_MOD_SHIFT; /* exclam */ 415 s->pre_map[0x28 | SPITZ_MOD_SHIFT] = 0x03 | SPITZ_MOD_SHIFT; /* quotedbl */ 416 s->pre_map[0x04 | SPITZ_MOD_SHIFT] = 0x04 | SPITZ_MOD_SHIFT; /* # */ 417 s->pre_map[0x05 | SPITZ_MOD_SHIFT] = 0x05 | SPITZ_MOD_SHIFT; /* dollar */ 418 s->pre_map[0x06 | SPITZ_MOD_SHIFT] = 0x06 | SPITZ_MOD_SHIFT; /* percent */ 419 s->pre_map[0x08 | SPITZ_MOD_SHIFT] = 0x07 | SPITZ_MOD_SHIFT; /* ampersand */ 420 s->pre_map[0x28] = 0x08 | SPITZ_MOD_SHIFT; /* ' */ 421 s->pre_map[0x0a | SPITZ_MOD_SHIFT] = 0x09 | SPITZ_MOD_SHIFT; /* ( */ 422 s->pre_map[0x0b | SPITZ_MOD_SHIFT] = 0x0a | SPITZ_MOD_SHIFT; /* ) */ 423 s->pre_map[0x29 | SPITZ_MOD_SHIFT] = 0x0b | SPITZ_MOD_SHIFT; /* tilde */ 424 s->pre_map[0x03 | SPITZ_MOD_SHIFT] = 0x0c | SPITZ_MOD_SHIFT; /* at */ 425 s->pre_map[0xd3] = 0x0e | SPITZ_MOD_FN; /* Delete */ 426 s->pre_map[0x3a] = 0x0f | SPITZ_MOD_FN; /* Caps_Lock */ 427 s->pre_map[0x07 | SPITZ_MOD_SHIFT] = 0x11 | SPITZ_MOD_FN; /* ^ */ 428 s->pre_map[0x0d] = 0x12 | SPITZ_MOD_FN; /* equal */ 429 s->pre_map[0x0d | SPITZ_MOD_SHIFT] = 0x13 | SPITZ_MOD_FN; /* plus */ 430 s->pre_map[0x1a] = 0x14 | SPITZ_MOD_FN; /* [ */ 431 s->pre_map[0x1b] = 0x15 | SPITZ_MOD_FN; /* ] */ 432 s->pre_map[0x1a | SPITZ_MOD_SHIFT] = 0x16 | SPITZ_MOD_FN; /* { */ 433 s->pre_map[0x1b | SPITZ_MOD_SHIFT] = 0x17 | SPITZ_MOD_FN; /* } */ 434 s->pre_map[0x27] = 0x22 | SPITZ_MOD_FN; /* semicolon */ 435 s->pre_map[0x27 | SPITZ_MOD_SHIFT] = 0x23 | SPITZ_MOD_FN; /* colon */ 436 s->pre_map[0x09 | SPITZ_MOD_SHIFT] = 0x24 | SPITZ_MOD_FN; /* asterisk */ 437 s->pre_map[0x2b] = 0x25 | SPITZ_MOD_FN; /* backslash */ 438 s->pre_map[0x2b | SPITZ_MOD_SHIFT] = 0x26 | SPITZ_MOD_FN; /* bar */ 439 s->pre_map[0x0c | SPITZ_MOD_SHIFT] = 0x30 | SPITZ_MOD_FN; /* _ */ 440 s->pre_map[0x33 | SPITZ_MOD_SHIFT] = 0x33 | SPITZ_MOD_FN; /* less */ 441 s->pre_map[0x35] = 0x33 | SPITZ_MOD_SHIFT; /* slash */ 442 s->pre_map[0x34 | SPITZ_MOD_SHIFT] = 0x34 | SPITZ_MOD_FN; /* greater */ 443 s->pre_map[0x35 | SPITZ_MOD_SHIFT] = 0x34 | SPITZ_MOD_SHIFT; /* question */ 444 s->pre_map[0x49] = 0x48 | SPITZ_MOD_FN; /* Page_Up */ 445 s->pre_map[0x51] = 0x50 | SPITZ_MOD_FN; /* Page_Down */ 446 447 s->modifiers = 0; 448 s->imodifiers = 0; 449 s->fifopos = 0; 450 s->fifolen = 0; 451 } 452 453 #undef SPITZ_MOD_SHIFT 454 #undef SPITZ_MOD_CTRL 455 #undef SPITZ_MOD_FN 456 457 static int spitz_keyboard_post_load(void *opaque, int version_id) 458 { 459 SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; 460 461 /* Release all pressed keys */ 462 memset(s->keyrow, 0, sizeof(s->keyrow)); 463 spitz_keyboard_sense_update(s); 464 s->modifiers = 0; 465 s->imodifiers = 0; 466 s->fifopos = 0; 467 s->fifolen = 0; 468 469 return 0; 470 } 471 472 static void spitz_keyboard_register(PXA2xxState *cpu) 473 { 474 int i; 475 DeviceState *dev; 476 SpitzKeyboardState *s; 477 478 dev = sysbus_create_simple(TYPE_SPITZ_KEYBOARD, -1, NULL); 479 s = SPITZ_KEYBOARD(dev); 480 481 for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) 482 qdev_connect_gpio_out(dev, i, qdev_get_gpio_in(cpu->gpio, spitz_gpio_key_sense[i])); 483 484 for (i = 0; i < 5; i ++) 485 s->gpiomap[i] = qdev_get_gpio_in(cpu->gpio, spitz_gpiomap[i]); 486 487 if (!graphic_rotate) 488 s->gpiomap[4] = qemu_irq_invert(s->gpiomap[4]); 489 490 for (i = 0; i < 5; i++) 491 qemu_set_irq(s->gpiomap[i], 0); 492 493 for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++) 494 qdev_connect_gpio_out(cpu->gpio, spitz_gpio_key_strobe[i], 495 qdev_get_gpio_in(dev, i)); 496 497 timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); 498 499 qemu_add_kbd_event_handler(spitz_keyboard_handler, s); 500 } 501 502 static int spitz_keyboard_init(SysBusDevice *sbd) 503 { 504 DeviceState *dev = DEVICE(sbd); 505 SpitzKeyboardState *s = SPITZ_KEYBOARD(dev); 506 int i, j; 507 508 for (i = 0; i < 0x80; i ++) 509 s->keymap[i] = -1; 510 for (i = 0; i < SPITZ_KEY_SENSE_NUM + 1; i ++) 511 for (j = 0; j < SPITZ_KEY_STROBE_NUM; j ++) 512 if (spitz_keymap[i][j] != -1) 513 s->keymap[spitz_keymap[i][j]] = (i << 4) | j; 514 515 spitz_keyboard_pre_map(s); 516 517 s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); 518 qdev_init_gpio_in(dev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM); 519 qdev_init_gpio_out(dev, s->sense, SPITZ_KEY_SENSE_NUM); 520 521 return 0; 522 } 523 524 /* LCD backlight controller */ 525 526 #define LCDTG_RESCTL 0x00 527 #define LCDTG_PHACTRL 0x01 528 #define LCDTG_DUTYCTRL 0x02 529 #define LCDTG_POWERREG0 0x03 530 #define LCDTG_POWERREG1 0x04 531 #define LCDTG_GPOR3 0x05 532 #define LCDTG_PICTRL 0x06 533 #define LCDTG_POLCTRL 0x07 534 535 typedef struct { 536 SSISlave ssidev; 537 uint32_t bl_intensity; 538 uint32_t bl_power; 539 } SpitzLCDTG; 540 541 static void spitz_bl_update(SpitzLCDTG *s) 542 { 543 if (s->bl_power && s->bl_intensity) 544 zaurus_printf("LCD Backlight now at %i/63\n", s->bl_intensity); 545 else 546 zaurus_printf("LCD Backlight now off\n"); 547 } 548 549 /* FIXME: Implement GPIO properly and remove this hack. */ 550 static SpitzLCDTG *spitz_lcdtg; 551 552 static inline void spitz_bl_bit5(void *opaque, int line, int level) 553 { 554 SpitzLCDTG *s = spitz_lcdtg; 555 int prev = s->bl_intensity; 556 557 if (level) 558 s->bl_intensity &= ~0x20; 559 else 560 s->bl_intensity |= 0x20; 561 562 if (s->bl_power && prev != s->bl_intensity) 563 spitz_bl_update(s); 564 } 565 566 static inline void spitz_bl_power(void *opaque, int line, int level) 567 { 568 SpitzLCDTG *s = spitz_lcdtg; 569 s->bl_power = !!level; 570 spitz_bl_update(s); 571 } 572 573 static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) 574 { 575 SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); 576 int addr; 577 addr = value >> 5; 578 value &= 0x1f; 579 580 switch (addr) { 581 case LCDTG_RESCTL: 582 if (value) 583 zaurus_printf("LCD in QVGA mode\n"); 584 else 585 zaurus_printf("LCD in VGA mode\n"); 586 break; 587 588 case LCDTG_DUTYCTRL: 589 s->bl_intensity &= ~0x1f; 590 s->bl_intensity |= value; 591 if (s->bl_power) 592 spitz_bl_update(s); 593 break; 594 595 case LCDTG_POWERREG0: 596 /* Set common voltage to M62332FP */ 597 break; 598 } 599 return 0; 600 } 601 602 static int spitz_lcdtg_init(SSISlave *dev) 603 { 604 SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); 605 606 spitz_lcdtg = s; 607 s->bl_power = 0; 608 s->bl_intensity = 0x20; 609 610 return 0; 611 } 612 613 /* SSP devices */ 614 615 #define CORGI_SSP_PORT 2 616 617 #define SPITZ_GPIO_LCDCON_CS 53 618 #define SPITZ_GPIO_ADS7846_CS 14 619 #define SPITZ_GPIO_MAX1111_CS 20 620 #define SPITZ_GPIO_TP_INT 11 621 622 static DeviceState *max1111; 623 624 /* "Demux" the signal based on current chipselect */ 625 typedef struct { 626 SSISlave ssidev; 627 SSIBus *bus[3]; 628 uint32_t enable[3]; 629 } CorgiSSPState; 630 631 static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value) 632 { 633 CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev); 634 int i; 635 636 for (i = 0; i < 3; i++) { 637 if (s->enable[i]) { 638 return ssi_transfer(s->bus[i], value); 639 } 640 } 641 return 0; 642 } 643 644 static void corgi_ssp_gpio_cs(void *opaque, int line, int level) 645 { 646 CorgiSSPState *s = (CorgiSSPState *)opaque; 647 assert(line >= 0 && line < 3); 648 s->enable[line] = !level; 649 } 650 651 #define MAX1111_BATT_VOLT 1 652 #define MAX1111_BATT_TEMP 2 653 #define MAX1111_ACIN_VOLT 3 654 655 #define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ 656 #define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ 657 #define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ 658 659 static void spitz_adc_temp_on(void *opaque, int line, int level) 660 { 661 if (!max1111) 662 return; 663 664 if (level) 665 max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP); 666 else 667 max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); 668 } 669 670 static int corgi_ssp_init(SSISlave *d) 671 { 672 DeviceState *dev = DEVICE(d); 673 CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, d); 674 675 qdev_init_gpio_in(dev, corgi_ssp_gpio_cs, 3); 676 s->bus[0] = ssi_create_bus(dev, "ssi0"); 677 s->bus[1] = ssi_create_bus(dev, "ssi1"); 678 s->bus[2] = ssi_create_bus(dev, "ssi2"); 679 680 return 0; 681 } 682 683 static void spitz_ssp_attach(PXA2xxState *cpu) 684 { 685 DeviceState *mux; 686 DeviceState *dev; 687 void *bus; 688 689 mux = ssi_create_slave(cpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); 690 691 bus = qdev_get_child_bus(mux, "ssi0"); 692 ssi_create_slave(bus, "spitz-lcdtg"); 693 694 bus = qdev_get_child_bus(mux, "ssi1"); 695 dev = ssi_create_slave(bus, "ads7846"); 696 qdev_connect_gpio_out(dev, 0, 697 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_TP_INT)); 698 699 bus = qdev_get_child_bus(mux, "ssi2"); 700 max1111 = ssi_create_slave(bus, "max1111"); 701 max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); 702 max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); 703 max111x_set_input(max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); 704 705 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_LCDCON_CS, 706 qdev_get_gpio_in(mux, 0)); 707 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ADS7846_CS, 708 qdev_get_gpio_in(mux, 1)); 709 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_MAX1111_CS, 710 qdev_get_gpio_in(mux, 2)); 711 } 712 713 /* CF Microdrive */ 714 715 static void spitz_microdrive_attach(PXA2xxState *cpu, int slot) 716 { 717 PCMCIACardState *md; 718 DriveInfo *dinfo; 719 720 dinfo = drive_get(IF_IDE, 0, 0); 721 if (!dinfo || dinfo->media_cd) 722 return; 723 md = dscm1xxxx_init(dinfo); 724 pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md); 725 } 726 727 /* Wm8750 and Max7310 on I2C */ 728 729 #define AKITA_MAX_ADDR 0x18 730 #define SPITZ_WM_ADDRL 0x1b 731 #define SPITZ_WM_ADDRH 0x1a 732 733 #define SPITZ_GPIO_WM 5 734 735 static void spitz_wm8750_addr(void *opaque, int line, int level) 736 { 737 I2CSlave *wm = (I2CSlave *) opaque; 738 if (level) 739 i2c_set_slave_address(wm, SPITZ_WM_ADDRH); 740 else 741 i2c_set_slave_address(wm, SPITZ_WM_ADDRL); 742 } 743 744 static void spitz_i2c_setup(PXA2xxState *cpu) 745 { 746 /* Attach the CPU on one end of our I2C bus. */ 747 I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]); 748 749 DeviceState *wm; 750 751 /* Attach a WM8750 to the bus */ 752 wm = i2c_create_slave(bus, "wm8750", 0); 753 754 spitz_wm8750_addr(wm, 0, 0); 755 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM, 756 qemu_allocate_irq(spitz_wm8750_addr, wm, 0)); 757 /* .. and to the sound interface. */ 758 cpu->i2s->opaque = wm; 759 cpu->i2s->codec_out = wm8750_dac_dat; 760 cpu->i2s->codec_in = wm8750_adc_dat; 761 wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s); 762 } 763 764 static void spitz_akita_i2c_setup(PXA2xxState *cpu) 765 { 766 /* Attach a Max7310 to Akita I2C bus. */ 767 i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310", 768 AKITA_MAX_ADDR); 769 } 770 771 /* Other peripherals */ 772 773 static void spitz_out_switch(void *opaque, int line, int level) 774 { 775 switch (line) { 776 case 0: 777 zaurus_printf("Charging %s.\n", level ? "off" : "on"); 778 break; 779 case 1: 780 zaurus_printf("Discharging %s.\n", level ? "on" : "off"); 781 break; 782 case 2: 783 zaurus_printf("Green LED %s.\n", level ? "on" : "off"); 784 break; 785 case 3: 786 zaurus_printf("Orange LED %s.\n", level ? "on" : "off"); 787 break; 788 case 4: 789 spitz_bl_bit5(opaque, line, level); 790 break; 791 case 5: 792 spitz_bl_power(opaque, line, level); 793 break; 794 case 6: 795 spitz_adc_temp_on(opaque, line, level); 796 break; 797 } 798 } 799 800 #define SPITZ_SCP_LED_GREEN 1 801 #define SPITZ_SCP_JK_B 2 802 #define SPITZ_SCP_CHRG_ON 3 803 #define SPITZ_SCP_MUTE_L 4 804 #define SPITZ_SCP_MUTE_R 5 805 #define SPITZ_SCP_CF_POWER 6 806 #define SPITZ_SCP_LED_ORANGE 7 807 #define SPITZ_SCP_JK_A 8 808 #define SPITZ_SCP_ADC_TEMP_ON 9 809 #define SPITZ_SCP2_IR_ON 1 810 #define SPITZ_SCP2_AKIN_PULLUP 2 811 #define SPITZ_SCP2_BACKLIGHT_CONT 7 812 #define SPITZ_SCP2_BACKLIGHT_ON 8 813 #define SPITZ_SCP2_MIC_BIAS 9 814 815 static void spitz_scoop_gpio_setup(PXA2xxState *cpu, 816 DeviceState *scp0, DeviceState *scp1) 817 { 818 qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8); 819 820 qdev_connect_gpio_out(scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); 821 qdev_connect_gpio_out(scp0, SPITZ_SCP_JK_B, outsignals[1]); 822 qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); 823 qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); 824 825 if (scp1) { 826 qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]); 827 qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]); 828 } 829 830 qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); 831 } 832 833 #define SPITZ_GPIO_HSYNC 22 834 #define SPITZ_GPIO_SD_DETECT 9 835 #define SPITZ_GPIO_SD_WP 81 836 #define SPITZ_GPIO_ON_RESET 89 837 #define SPITZ_GPIO_BAT_COVER 90 838 #define SPITZ_GPIO_CF1_IRQ 105 839 #define SPITZ_GPIO_CF1_CD 94 840 #define SPITZ_GPIO_CF2_IRQ 106 841 #define SPITZ_GPIO_CF2_CD 93 842 843 static int spitz_hsync; 844 845 static void spitz_lcd_hsync_handler(void *opaque, int line, int level) 846 { 847 PXA2xxState *cpu = (PXA2xxState *) opaque; 848 qemu_set_irq(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_HSYNC), spitz_hsync); 849 spitz_hsync ^= 1; 850 } 851 852 static void spitz_gpio_setup(PXA2xxState *cpu, int slots) 853 { 854 qemu_irq lcd_hsync; 855 /* 856 * Bad hack: We toggle the LCD hsync GPIO on every GPIO status 857 * read to satisfy broken guests that poll-wait for hsync. 858 * Simulating a real hsync event would be less practical and 859 * wouldn't guarantee that a guest ever exits the loop. 860 */ 861 spitz_hsync = 0; 862 lcd_hsync = qemu_allocate_irq(spitz_lcd_hsync_handler, cpu, 0); 863 pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync); 864 pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync); 865 866 /* MMC/SD host */ 867 pxa2xx_mmci_handlers(cpu->mmc, 868 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_WP), 869 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_DETECT)); 870 871 /* Battery lock always closed */ 872 qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_BAT_COVER)); 873 874 /* Handle reset */ 875 qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ON_RESET, cpu->reset); 876 877 /* PCMCIA signals: card's IRQ and Card-Detect */ 878 if (slots >= 1) 879 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0], 880 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_IRQ), 881 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_CD)); 882 if (slots >= 2) 883 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1], 884 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_IRQ), 885 qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_CD)); 886 } 887 888 /* Board init. */ 889 enum spitz_model_e { spitz, akita, borzoi, terrier }; 890 891 #define SPITZ_RAM 0x04000000 892 #define SPITZ_ROM 0x00800000 893 894 static struct arm_boot_info spitz_binfo = { 895 .loader_start = PXA2XX_SDRAM_BASE, 896 .ram_size = 0x04000000, 897 }; 898 899 static void spitz_common_init(MachineState *machine, 900 enum spitz_model_e model, int arm_id) 901 { 902 PXA2xxState *mpu; 903 DeviceState *scp0, *scp1 = NULL; 904 MemoryRegion *address_space_mem = get_system_memory(); 905 MemoryRegion *rom = g_new(MemoryRegion, 1); 906 const char *cpu_model = machine->cpu_model; 907 908 if (!cpu_model) 909 cpu_model = (model == terrier) ? "pxa270-c5" : "pxa270-c0"; 910 911 /* Setup CPU & memory */ 912 mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, cpu_model); 913 914 sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); 915 916 memory_region_init_ram(rom, NULL, "spitz.rom", SPITZ_ROM, &error_fatal); 917 vmstate_register_ram_global(rom); 918 memory_region_set_readonly(rom, true); 919 memory_region_add_subregion(address_space_mem, 0, rom); 920 921 /* Setup peripherals */ 922 spitz_keyboard_register(mpu); 923 924 spitz_ssp_attach(mpu); 925 926 scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); 927 if (model != akita) { 928 scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); 929 } 930 931 spitz_scoop_gpio_setup(mpu, scp0, scp1); 932 933 spitz_gpio_setup(mpu, (model == akita) ? 1 : 2); 934 935 spitz_i2c_setup(mpu); 936 937 if (model == akita) 938 spitz_akita_i2c_setup(mpu); 939 940 if (model == terrier) 941 /* A 6.0 GB microdrive is permanently sitting in CF slot 1. */ 942 spitz_microdrive_attach(mpu, 1); 943 else if (model != akita) 944 /* A 4.0 GB microdrive is permanently sitting in CF slot 0. */ 945 spitz_microdrive_attach(mpu, 0); 946 947 spitz_binfo.kernel_filename = machine->kernel_filename; 948 spitz_binfo.kernel_cmdline = machine->kernel_cmdline; 949 spitz_binfo.initrd_filename = machine->initrd_filename; 950 spitz_binfo.board_id = arm_id; 951 arm_load_kernel(mpu->cpu, &spitz_binfo); 952 sl_bootparam_write(SL_PXA_PARAM_BASE); 953 } 954 955 static void spitz_init(MachineState *machine) 956 { 957 spitz_common_init(machine, spitz, 0x2c9); 958 } 959 960 static void borzoi_init(MachineState *machine) 961 { 962 spitz_common_init(machine, borzoi, 0x33f); 963 } 964 965 static void akita_init(MachineState *machine) 966 { 967 spitz_common_init(machine, akita, 0x2e8); 968 } 969 970 static void terrier_init(MachineState *machine) 971 { 972 spitz_common_init(machine, terrier, 0x33f); 973 } 974 975 static void akitapda_class_init(ObjectClass *oc, void *data) 976 { 977 MachineClass *mc = MACHINE_CLASS(oc); 978 979 mc->desc = "Sharp SL-C1000 (Akita) PDA (PXA270)"; 980 mc->init = akita_init; 981 } 982 983 static const TypeInfo akitapda_type = { 984 .name = MACHINE_TYPE_NAME("akita"), 985 .parent = TYPE_MACHINE, 986 .class_init = akitapda_class_init, 987 }; 988 989 static void spitzpda_class_init(ObjectClass *oc, void *data) 990 { 991 MachineClass *mc = MACHINE_CLASS(oc); 992 993 mc->desc = "Sharp SL-C3000 (Spitz) PDA (PXA270)"; 994 mc->init = spitz_init; 995 } 996 997 static const TypeInfo spitzpda_type = { 998 .name = MACHINE_TYPE_NAME("spitz"), 999 .parent = TYPE_MACHINE, 1000 .class_init = spitzpda_class_init, 1001 }; 1002 1003 static void borzoipda_class_init(ObjectClass *oc, void *data) 1004 { 1005 MachineClass *mc = MACHINE_CLASS(oc); 1006 1007 mc->desc = "Sharp SL-C3100 (Borzoi) PDA (PXA270)"; 1008 mc->init = borzoi_init; 1009 } 1010 1011 static const TypeInfo borzoipda_type = { 1012 .name = MACHINE_TYPE_NAME("borzoi"), 1013 .parent = TYPE_MACHINE, 1014 .class_init = borzoipda_class_init, 1015 }; 1016 1017 static void terrierpda_class_init(ObjectClass *oc, void *data) 1018 { 1019 MachineClass *mc = MACHINE_CLASS(oc); 1020 1021 mc->desc = "Sharp SL-C3200 (Terrier) PDA (PXA270)"; 1022 mc->init = terrier_init; 1023 } 1024 1025 static const TypeInfo terrierpda_type = { 1026 .name = MACHINE_TYPE_NAME("terrier"), 1027 .parent = TYPE_MACHINE, 1028 .class_init = terrierpda_class_init, 1029 }; 1030 1031 static void spitz_machine_init(void) 1032 { 1033 type_register_static(&akitapda_type); 1034 type_register_static(&spitzpda_type); 1035 type_register_static(&borzoipda_type); 1036 type_register_static(&terrierpda_type); 1037 } 1038 1039 machine_init(spitz_machine_init) 1040 1041 static bool is_version_0(void *opaque, int version_id) 1042 { 1043 return version_id == 0; 1044 } 1045 1046 static VMStateDescription vmstate_sl_nand_info = { 1047 .name = "sl-nand", 1048 .version_id = 0, 1049 .minimum_version_id = 0, 1050 .fields = (VMStateField[]) { 1051 VMSTATE_UINT8(ctl, SLNANDState), 1052 VMSTATE_STRUCT(ecc, SLNANDState, 0, vmstate_ecc_state, ECCState), 1053 VMSTATE_END_OF_LIST(), 1054 }, 1055 }; 1056 1057 static Property sl_nand_properties[] = { 1058 DEFINE_PROP_UINT8("manf_id", SLNANDState, manf_id, NAND_MFR_SAMSUNG), 1059 DEFINE_PROP_UINT8("chip_id", SLNANDState, chip_id, 0xf1), 1060 DEFINE_PROP_END_OF_LIST(), 1061 }; 1062 1063 static void sl_nand_class_init(ObjectClass *klass, void *data) 1064 { 1065 DeviceClass *dc = DEVICE_CLASS(klass); 1066 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 1067 1068 k->init = sl_nand_init; 1069 dc->vmsd = &vmstate_sl_nand_info; 1070 dc->props = sl_nand_properties; 1071 /* Reason: init() method uses drive_get() */ 1072 dc->cannot_instantiate_with_device_add_yet = true; 1073 } 1074 1075 static const TypeInfo sl_nand_info = { 1076 .name = TYPE_SL_NAND, 1077 .parent = TYPE_SYS_BUS_DEVICE, 1078 .instance_size = sizeof(SLNANDState), 1079 .class_init = sl_nand_class_init, 1080 }; 1081 1082 static VMStateDescription vmstate_spitz_kbd = { 1083 .name = "spitz-keyboard", 1084 .version_id = 1, 1085 .minimum_version_id = 0, 1086 .post_load = spitz_keyboard_post_load, 1087 .fields = (VMStateField[]) { 1088 VMSTATE_UINT16(sense_state, SpitzKeyboardState), 1089 VMSTATE_UINT16(strobe_state, SpitzKeyboardState), 1090 VMSTATE_UNUSED_TEST(is_version_0, 5), 1091 VMSTATE_END_OF_LIST(), 1092 }, 1093 }; 1094 1095 static void spitz_keyboard_class_init(ObjectClass *klass, void *data) 1096 { 1097 DeviceClass *dc = DEVICE_CLASS(klass); 1098 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 1099 1100 k->init = spitz_keyboard_init; 1101 dc->vmsd = &vmstate_spitz_kbd; 1102 } 1103 1104 static const TypeInfo spitz_keyboard_info = { 1105 .name = TYPE_SPITZ_KEYBOARD, 1106 .parent = TYPE_SYS_BUS_DEVICE, 1107 .instance_size = sizeof(SpitzKeyboardState), 1108 .class_init = spitz_keyboard_class_init, 1109 }; 1110 1111 static const VMStateDescription vmstate_corgi_ssp_regs = { 1112 .name = "corgi-ssp", 1113 .version_id = 2, 1114 .minimum_version_id = 2, 1115 .fields = (VMStateField[]) { 1116 VMSTATE_SSI_SLAVE(ssidev, CorgiSSPState), 1117 VMSTATE_UINT32_ARRAY(enable, CorgiSSPState, 3), 1118 VMSTATE_END_OF_LIST(), 1119 } 1120 }; 1121 1122 static void corgi_ssp_class_init(ObjectClass *klass, void *data) 1123 { 1124 DeviceClass *dc = DEVICE_CLASS(klass); 1125 SSISlaveClass *k = SSI_SLAVE_CLASS(klass); 1126 1127 k->init = corgi_ssp_init; 1128 k->transfer = corgi_ssp_transfer; 1129 dc->vmsd = &vmstate_corgi_ssp_regs; 1130 } 1131 1132 static const TypeInfo corgi_ssp_info = { 1133 .name = "corgi-ssp", 1134 .parent = TYPE_SSI_SLAVE, 1135 .instance_size = sizeof(CorgiSSPState), 1136 .class_init = corgi_ssp_class_init, 1137 }; 1138 1139 static const VMStateDescription vmstate_spitz_lcdtg_regs = { 1140 .name = "spitz-lcdtg", 1141 .version_id = 1, 1142 .minimum_version_id = 1, 1143 .fields = (VMStateField[]) { 1144 VMSTATE_SSI_SLAVE(ssidev, SpitzLCDTG), 1145 VMSTATE_UINT32(bl_intensity, SpitzLCDTG), 1146 VMSTATE_UINT32(bl_power, SpitzLCDTG), 1147 VMSTATE_END_OF_LIST(), 1148 } 1149 }; 1150 1151 static void spitz_lcdtg_class_init(ObjectClass *klass, void *data) 1152 { 1153 DeviceClass *dc = DEVICE_CLASS(klass); 1154 SSISlaveClass *k = SSI_SLAVE_CLASS(klass); 1155 1156 k->init = spitz_lcdtg_init; 1157 k->transfer = spitz_lcdtg_transfer; 1158 dc->vmsd = &vmstate_spitz_lcdtg_regs; 1159 } 1160 1161 static const TypeInfo spitz_lcdtg_info = { 1162 .name = "spitz-lcdtg", 1163 .parent = TYPE_SSI_SLAVE, 1164 .instance_size = sizeof(SpitzLCDTG), 1165 .class_init = spitz_lcdtg_class_init, 1166 }; 1167 1168 static void spitz_register_types(void) 1169 { 1170 type_register_static(&corgi_ssp_info); 1171 type_register_static(&spitz_lcdtg_info); 1172 type_register_static(&spitz_keyboard_info); 1173 type_register_static(&sl_nand_info); 1174 } 1175 1176 type_init(spitz_register_types) 1177