xref: /openbmc/qemu/hw/arm/sabrelite.c (revision ca27b5eb)
1 /*
2  * SABRELITE Board System emulation.
3  *
4  * Copyright (c) 2015 Jean-Christophe Dubois <jcd@tribudubois.net>
5  *
6  * This code is licensed under the GPL, version 2 or later.
7  * See the file `COPYING' in the top level directory.
8  *
9  * It (partially) emulates a sabrelite board, with a Freescale
10  * i.MX6 SoC
11  */
12 
13 #include "qemu/osdep.h"
14 #include "qapi/error.h"
15 #include "hw/arm/fsl-imx6.h"
16 #include "hw/boards.h"
17 #include "hw/qdev-properties.h"
18 #include "sysemu/sysemu.h"
19 #include "qemu/error-report.h"
20 #include "sysemu/qtest.h"
21 
22 static struct arm_boot_info sabrelite_binfo = {
23     /* DDR memory start */
24     .loader_start = FSL_IMX6_MMDC_ADDR,
25     /* No board ID, we boot from DT tree */
26     .board_id = -1,
27 };
28 
29 /* No need to do any particular setup for secondary boot */
30 static void sabrelite_write_secondary(ARMCPU *cpu,
31                                       const struct arm_boot_info *info)
32 {
33 }
34 
35 /* Secondary cores are reset through SRC device */
36 static void sabrelite_reset_secondary(ARMCPU *cpu,
37                                       const struct arm_boot_info *info)
38 {
39 }
40 
41 static void sabrelite_init(MachineState *machine)
42 {
43     FslIMX6State *s;
44 
45     /* Check the amount of memory is compatible with the SOC */
46     if (machine->ram_size > FSL_IMX6_MMDC_SIZE) {
47         error_report("RAM size " RAM_ADDR_FMT " above max supported (%08x)",
48                      machine->ram_size, FSL_IMX6_MMDC_SIZE);
49         exit(1);
50     }
51 
52     s = FSL_IMX6(object_new(TYPE_FSL_IMX6));
53     object_property_add_child(OBJECT(machine), "soc", OBJECT(s));
54     object_property_set_bool(OBJECT(s), true, "realized", &error_fatal);
55 
56     memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR,
57                                 machine->ram);
58 
59     {
60         /*
61          * TODO: Ideally we would expose the chip select and spi bus on the
62          * SoC object using alias properties; then we would not need to
63          * directly access the underlying spi device object.
64          */
65         /* Add the sst25vf016b NOR FLASH memory to first SPI */
66         Object *spi_dev;
67 
68         spi_dev = object_resolve_path_component(OBJECT(s), "spi1");
69         if (spi_dev) {
70             SSIBus *spi_bus;
71 
72             spi_bus = (SSIBus *)qdev_get_child_bus(DEVICE(spi_dev), "spi");
73             if (spi_bus) {
74                 DeviceState *flash_dev;
75                 qemu_irq cs_line;
76                 DriveInfo *dinfo = drive_get_next(IF_MTD);
77 
78                 flash_dev = ssi_create_slave_no_init(spi_bus, "sst25vf016b");
79                 if (dinfo) {
80                     qdev_prop_set_drive(flash_dev, "drive",
81                                         blk_by_legacy_dinfo(dinfo),
82                                         &error_fatal);
83                 }
84                 qdev_init_nofail(flash_dev);
85 
86                 cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
87                 sysbus_connect_irq(SYS_BUS_DEVICE(spi_dev), 1, cs_line);
88             }
89         }
90     }
91 
92     sabrelite_binfo.ram_size = machine->ram_size;
93     sabrelite_binfo.nb_cpus = machine->smp.cpus;
94     sabrelite_binfo.secure_boot = true;
95     sabrelite_binfo.write_secondary_boot = sabrelite_write_secondary;
96     sabrelite_binfo.secondary_cpu_reset_hook = sabrelite_reset_secondary;
97 
98     if (!qtest_enabled()) {
99         arm_load_kernel(&s->cpu[0], machine, &sabrelite_binfo);
100     }
101 }
102 
103 static void sabrelite_machine_init(MachineClass *mc)
104 {
105     mc->desc = "Freescale i.MX6 Quad SABRE Lite Board (Cortex A9)";
106     mc->init = sabrelite_init;
107     mc->max_cpus = FSL_IMX6_NUM_CPUS;
108     mc->ignore_memory_transaction_failures = true;
109     mc->default_ram_id = "sabrelite.ram";
110 }
111 
112 DEFINE_MACHINE("sabrelite", sabrelite_machine_init)
113