1 /* 2 * SABRELITE Board System emulation. 3 * 4 * Copyright (c) 2015 Jean-Christophe Dubois <jcd@tribudubois.net> 5 * 6 * This code is licensed under the GPL, version 2 or later. 7 * See the file `COPYING' in the top level directory. 8 * 9 * It (partially) emulates a sabrelite board, with a Freescale 10 * i.MX6 SoC 11 */ 12 13 #include "qemu/osdep.h" 14 #include "qapi/error.h" 15 #include "hw/arm/fsl-imx6.h" 16 #include "hw/boards.h" 17 #include "hw/qdev-properties.h" 18 #include "sysemu/sysemu.h" 19 #include "qemu/error-report.h" 20 #include "sysemu/qtest.h" 21 22 static struct arm_boot_info sabrelite_binfo = { 23 /* DDR memory start */ 24 .loader_start = FSL_IMX6_MMDC_ADDR, 25 /* No board ID, we boot from DT tree */ 26 .board_id = -1, 27 }; 28 29 /* No need to do any particular setup for secondary boot */ 30 static void sabrelite_write_secondary(ARMCPU *cpu, 31 const struct arm_boot_info *info) 32 { 33 } 34 35 /* Secondary cores are reset through SRC device */ 36 static void sabrelite_reset_secondary(ARMCPU *cpu, 37 const struct arm_boot_info *info) 38 { 39 } 40 41 static void sabrelite_init(MachineState *machine) 42 { 43 FslIMX6State *s; 44 45 /* Check the amount of memory is compatible with the SOC */ 46 if (machine->ram_size > FSL_IMX6_MMDC_SIZE) { 47 error_report("RAM size " RAM_ADDR_FMT " above max supported (%08x)", 48 machine->ram_size, FSL_IMX6_MMDC_SIZE); 49 exit(1); 50 } 51 52 s = FSL_IMX6(object_new(TYPE_FSL_IMX6)); 53 object_property_add_child(OBJECT(machine), "soc", OBJECT(s)); 54 qdev_realize(DEVICE(s), NULL, &error_fatal); 55 56 memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR, 57 machine->ram); 58 59 { 60 /* 61 * TODO: Ideally we would expose the chip select and spi bus on the 62 * SoC object using alias properties; then we would not need to 63 * directly access the underlying spi device object. 64 */ 65 /* Add the sst25vf016b NOR FLASH memory to first SPI */ 66 Object *spi_dev; 67 68 spi_dev = object_resolve_path_component(OBJECT(s), "spi1"); 69 if (spi_dev) { 70 SSIBus *spi_bus; 71 72 spi_bus = (SSIBus *)qdev_get_child_bus(DEVICE(spi_dev), "spi"); 73 if (spi_bus) { 74 DeviceState *flash_dev; 75 qemu_irq cs_line; 76 DriveInfo *dinfo = drive_get_next(IF_MTD); 77 78 flash_dev = qdev_new("sst25vf016b"); 79 if (dinfo) { 80 qdev_prop_set_drive_err(flash_dev, "drive", 81 blk_by_legacy_dinfo(dinfo), 82 &error_fatal); 83 } 84 qdev_realize_and_unref(flash_dev, BUS(spi_bus), &error_fatal); 85 86 cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0); 87 sysbus_connect_irq(SYS_BUS_DEVICE(spi_dev), 1, cs_line); 88 } 89 } 90 } 91 92 sabrelite_binfo.ram_size = machine->ram_size; 93 sabrelite_binfo.nb_cpus = machine->smp.cpus; 94 sabrelite_binfo.secure_boot = true; 95 sabrelite_binfo.write_secondary_boot = sabrelite_write_secondary; 96 sabrelite_binfo.secondary_cpu_reset_hook = sabrelite_reset_secondary; 97 98 if (!qtest_enabled()) { 99 arm_load_kernel(&s->cpu[0], machine, &sabrelite_binfo); 100 } 101 } 102 103 static void sabrelite_machine_init(MachineClass *mc) 104 { 105 mc->desc = "Freescale i.MX6 Quad SABRE Lite Board (Cortex A9)"; 106 mc->init = sabrelite_init; 107 mc->max_cpus = FSL_IMX6_NUM_CPUS; 108 mc->ignore_memory_transaction_failures = true; 109 mc->default_ram_id = "sabrelite.ram"; 110 } 111 112 DEFINE_MACHINE("sabrelite", sabrelite_machine_init) 113