1 /* 2 * ARM RealView Baseboard System emulation. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "qapi/error.h" 12 #include "cpu.h" 13 #include "hw/sysbus.h" 14 #include "hw/arm/boot.h" 15 #include "hw/arm/primecell.h" 16 #include "hw/net/lan9118.h" 17 #include "hw/net/smc91c111.h" 18 #include "hw/pci/pci.h" 19 #include "net/net.h" 20 #include "sysemu/sysemu.h" 21 #include "hw/boards.h" 22 #include "hw/i2c/i2c.h" 23 #include "qemu/error-report.h" 24 #include "hw/char/pl011.h" 25 #include "hw/cpu/a9mpcore.h" 26 #include "hw/intc/realview_gic.h" 27 #include "hw/irq.h" 28 #include "hw/i2c/arm_sbcon_i2c.h" 29 #include "hw/sd/sd.h" 30 31 #define SMP_BOOT_ADDR 0xe0000000 32 #define SMP_BOOTREG_ADDR 0x10000030 33 34 /* Board init. */ 35 36 static struct arm_boot_info realview_binfo = { 37 .smp_loader_start = SMP_BOOT_ADDR, 38 .smp_bootreg_addr = SMP_BOOTREG_ADDR, 39 }; 40 41 /* The following two lists must be consistent. */ 42 enum realview_board_type { 43 BOARD_EB, 44 BOARD_EB_MPCORE, 45 BOARD_PB_A8, 46 BOARD_PBX_A9, 47 }; 48 49 static const int realview_board_id[] = { 50 0x33b, 51 0x33b, 52 0x769, 53 0x76d 54 }; 55 56 static void realview_init(MachineState *machine, 57 enum realview_board_type board_type) 58 { 59 ARMCPU *cpu = NULL; 60 CPUARMState *env; 61 MemoryRegion *sysmem = get_system_memory(); 62 MemoryRegion *ram_lo; 63 MemoryRegion *ram_hi = g_new(MemoryRegion, 1); 64 MemoryRegion *ram_alias = g_new(MemoryRegion, 1); 65 MemoryRegion *ram_hack = g_new(MemoryRegion, 1); 66 DeviceState *dev, *sysctl, *gpio2, *pl041; 67 SysBusDevice *busdev; 68 qemu_irq pic[64]; 69 qemu_irq mmc_irq[2]; 70 PCIBus *pci_bus = NULL; 71 NICInfo *nd; 72 DriveInfo *dinfo; 73 I2CBus *i2c; 74 int n; 75 unsigned int smp_cpus = machine->smp.cpus; 76 int done_nic = 0; 77 qemu_irq cpu_irq[4]; 78 int is_mpcore = 0; 79 int is_pb = 0; 80 uint32_t proc_id = 0; 81 uint32_t sys_id; 82 ram_addr_t low_ram_size; 83 ram_addr_t ram_size = machine->ram_size; 84 hwaddr periphbase = 0; 85 86 switch (board_type) { 87 case BOARD_EB: 88 break; 89 case BOARD_EB_MPCORE: 90 is_mpcore = 1; 91 periphbase = 0x10100000; 92 break; 93 case BOARD_PB_A8: 94 is_pb = 1; 95 break; 96 case BOARD_PBX_A9: 97 is_mpcore = 1; 98 is_pb = 1; 99 periphbase = 0x1f000000; 100 break; 101 } 102 103 for (n = 0; n < smp_cpus; n++) { 104 Object *cpuobj = object_new(machine->cpu_type); 105 106 /* By default A9,A15 and ARM1176 CPUs have EL3 enabled. This board 107 * does not currently support EL3 so the CPU EL3 property is disabled 108 * before realization. 109 */ 110 if (object_property_find(cpuobj, "has_el3")) { 111 object_property_set_bool(cpuobj, "has_el3", false, &error_fatal); 112 } 113 114 if (is_pb && is_mpcore) { 115 object_property_set_int(cpuobj, "reset-cbar", periphbase, 116 &error_fatal); 117 } 118 119 qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); 120 121 cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpuobj), ARM_CPU_IRQ); 122 } 123 cpu = ARM_CPU(first_cpu); 124 env = &cpu->env; 125 if (arm_feature(env, ARM_FEATURE_V7)) { 126 if (is_mpcore) { 127 proc_id = 0x0c000000; 128 } else { 129 proc_id = 0x0e000000; 130 } 131 } else if (arm_feature(env, ARM_FEATURE_V6K)) { 132 proc_id = 0x06000000; 133 } else if (arm_feature(env, ARM_FEATURE_V6)) { 134 proc_id = 0x04000000; 135 } else { 136 proc_id = 0x02000000; 137 } 138 139 if (is_pb && ram_size > 0x20000000) { 140 /* Core tile RAM. */ 141 ram_lo = g_new(MemoryRegion, 1); 142 low_ram_size = ram_size - 0x20000000; 143 ram_size = 0x20000000; 144 memory_region_init_ram(ram_lo, NULL, "realview.lowmem", low_ram_size, 145 &error_fatal); 146 memory_region_add_subregion(sysmem, 0x20000000, ram_lo); 147 } 148 149 memory_region_init_ram(ram_hi, NULL, "realview.highmem", ram_size, 150 &error_fatal); 151 low_ram_size = ram_size; 152 if (low_ram_size > 0x10000000) 153 low_ram_size = 0x10000000; 154 /* SDRAM at address zero. */ 155 memory_region_init_alias(ram_alias, NULL, "realview.alias", 156 ram_hi, 0, low_ram_size); 157 memory_region_add_subregion(sysmem, 0, ram_alias); 158 if (is_pb) { 159 /* And again at a high address. */ 160 memory_region_add_subregion(sysmem, 0x70000000, ram_hi); 161 } else { 162 ram_size = low_ram_size; 163 } 164 165 sys_id = is_pb ? 0x01780500 : 0xc1400400; 166 sysctl = qdev_new("realview_sysctl"); 167 qdev_prop_set_uint32(sysctl, "sys_id", sys_id); 168 qdev_prop_set_uint32(sysctl, "proc_id", proc_id); 169 sysbus_realize_and_unref(SYS_BUS_DEVICE(sysctl), &error_fatal); 170 sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000); 171 172 if (is_mpcore) { 173 dev = qdev_new(is_pb ? TYPE_A9MPCORE_PRIV : "realview_mpcore"); 174 qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); 175 busdev = SYS_BUS_DEVICE(dev); 176 sysbus_realize_and_unref(busdev, &error_fatal); 177 sysbus_mmio_map(busdev, 0, periphbase); 178 for (n = 0; n < smp_cpus; n++) { 179 sysbus_connect_irq(busdev, n, cpu_irq[n]); 180 } 181 sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL); 182 /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */ 183 realview_binfo.gic_cpu_if_addr = periphbase + 0x100; 184 } else { 185 uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000; 186 /* For now just create the nIRQ GIC, and ignore the others. */ 187 dev = sysbus_create_simple(TYPE_REALVIEW_GIC, gic_addr, cpu_irq[0]); 188 } 189 for (n = 0; n < 64; n++) { 190 pic[n] = qdev_get_gpio_in(dev, n); 191 } 192 193 pl041 = qdev_new("pl041"); 194 qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512); 195 sysbus_realize_and_unref(SYS_BUS_DEVICE(pl041), &error_fatal); 196 sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000); 197 sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[19]); 198 199 sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]); 200 sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]); 201 202 pl011_create(0x10009000, pic[12], serial_hd(0)); 203 pl011_create(0x1000a000, pic[13], serial_hd(1)); 204 pl011_create(0x1000b000, pic[14], serial_hd(2)); 205 pl011_create(0x1000c000, pic[15], serial_hd(3)); 206 207 /* DMA controller is optional, apparently. */ 208 dev = qdev_new("pl081"); 209 object_property_set_link(OBJECT(dev), "downstream", OBJECT(sysmem), 210 &error_fatal); 211 busdev = SYS_BUS_DEVICE(dev); 212 sysbus_realize_and_unref(busdev, &error_fatal); 213 sysbus_mmio_map(busdev, 0, 0x10030000); 214 sysbus_connect_irq(busdev, 0, pic[24]); 215 216 sysbus_create_simple("sp804", 0x10011000, pic[4]); 217 sysbus_create_simple("sp804", 0x10012000, pic[5]); 218 219 sysbus_create_simple("pl061", 0x10013000, pic[6]); 220 sysbus_create_simple("pl061", 0x10014000, pic[7]); 221 gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]); 222 223 sysbus_create_simple("pl111", 0x10020000, pic[23]); 224 225 dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL); 226 /* Wire up MMC card detect and read-only signals. These have 227 * to go to both the PL061 GPIO and the sysctl register. 228 * Note that the PL181 orders these lines (readonly,inserted) 229 * and the PL061 has them the other way about. Also the card 230 * detect line is inverted. 231 */ 232 mmc_irq[0] = qemu_irq_split( 233 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), 234 qdev_get_gpio_in(gpio2, 1)); 235 mmc_irq[1] = qemu_irq_split( 236 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), 237 qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); 238 qdev_connect_gpio_out_named(dev, "card-read-only", 0, mmc_irq[0]); 239 qdev_connect_gpio_out_named(dev, "card-inserted", 0, mmc_irq[1]); 240 dinfo = drive_get_next(IF_SD); 241 if (dinfo) { 242 DeviceState *card; 243 244 card = qdev_new(TYPE_SD_CARD); 245 qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), 246 &error_fatal); 247 qdev_realize_and_unref(card, qdev_get_child_bus(dev, "sd-bus"), 248 &error_fatal); 249 } 250 251 sysbus_create_simple("pl031", 0x10017000, pic[10]); 252 253 if (!is_pb) { 254 dev = qdev_new("realview_pci"); 255 busdev = SYS_BUS_DEVICE(dev); 256 sysbus_realize_and_unref(busdev, &error_fatal); 257 sysbus_mmio_map(busdev, 0, 0x10019000); /* PCI controller registers */ 258 sysbus_mmio_map(busdev, 1, 0x60000000); /* PCI self-config */ 259 sysbus_mmio_map(busdev, 2, 0x61000000); /* PCI config */ 260 sysbus_mmio_map(busdev, 3, 0x62000000); /* PCI I/O */ 261 sysbus_mmio_map(busdev, 4, 0x63000000); /* PCI memory window 1 */ 262 sysbus_mmio_map(busdev, 5, 0x64000000); /* PCI memory window 2 */ 263 sysbus_mmio_map(busdev, 6, 0x68000000); /* PCI memory window 3 */ 264 sysbus_connect_irq(busdev, 0, pic[48]); 265 sysbus_connect_irq(busdev, 1, pic[49]); 266 sysbus_connect_irq(busdev, 2, pic[50]); 267 sysbus_connect_irq(busdev, 3, pic[51]); 268 pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci"); 269 if (machine_usb(machine)) { 270 pci_create_simple(pci_bus, -1, "pci-ohci"); 271 } 272 n = drive_get_max_bus(IF_SCSI); 273 while (n >= 0) { 274 dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a")); 275 lsi53c8xx_handle_legacy_cmdline(dev); 276 n--; 277 } 278 } 279 for(n = 0; n < nb_nics; n++) { 280 nd = &nd_table[n]; 281 282 if (!done_nic && (!nd->model || 283 strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) { 284 if (is_pb) { 285 lan9118_init(nd, 0x4e000000, pic[28]); 286 } else { 287 smc91c111_init(nd, 0x4e000000, pic[28]); 288 } 289 done_nic = 1; 290 } else { 291 if (pci_bus) { 292 pci_nic_init_nofail(nd, pci_bus, "rtl8139", NULL); 293 } 294 } 295 } 296 297 dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL); 298 i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); 299 i2c_slave_create_simple(i2c, "ds1338", 0x68); 300 301 /* Memory map for RealView Emulation Baseboard: */ 302 /* 0x10000000 System registers. */ 303 /* 0x10001000 System controller. */ 304 /* 0x10002000 Two-Wire Serial Bus. */ 305 /* 0x10003000 Reserved. */ 306 /* 0x10004000 AACI. */ 307 /* 0x10005000 MCI. */ 308 /* 0x10006000 KMI0. */ 309 /* 0x10007000 KMI1. */ 310 /* 0x10008000 Character LCD. (EB) */ 311 /* 0x10009000 UART0. */ 312 /* 0x1000a000 UART1. */ 313 /* 0x1000b000 UART2. */ 314 /* 0x1000c000 UART3. */ 315 /* 0x1000d000 SSPI. */ 316 /* 0x1000e000 SCI. */ 317 /* 0x1000f000 Reserved. */ 318 /* 0x10010000 Watchdog. */ 319 /* 0x10011000 Timer 0+1. */ 320 /* 0x10012000 Timer 2+3. */ 321 /* 0x10013000 GPIO 0. */ 322 /* 0x10014000 GPIO 1. */ 323 /* 0x10015000 GPIO 2. */ 324 /* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */ 325 /* 0x10017000 RTC. */ 326 /* 0x10018000 DMC. */ 327 /* 0x10019000 PCI controller config. */ 328 /* 0x10020000 CLCD. */ 329 /* 0x10030000 DMA Controller. */ 330 /* 0x10040000 GIC1. (EB) */ 331 /* 0x10050000 GIC2. (EB) */ 332 /* 0x10060000 GIC3. (EB) */ 333 /* 0x10070000 GIC4. (EB) */ 334 /* 0x10080000 SMC. */ 335 /* 0x1e000000 GIC1. (PB) */ 336 /* 0x1e001000 GIC2. (PB) */ 337 /* 0x1e002000 GIC3. (PB) */ 338 /* 0x1e003000 GIC4. (PB) */ 339 /* 0x40000000 NOR flash. */ 340 /* 0x44000000 DoC flash. */ 341 /* 0x48000000 SRAM. */ 342 /* 0x4c000000 Configuration flash. */ 343 /* 0x4e000000 Ethernet. */ 344 /* 0x4f000000 USB. */ 345 /* 0x50000000 PISMO. */ 346 /* 0x54000000 PISMO. */ 347 /* 0x58000000 PISMO. */ 348 /* 0x5c000000 PISMO. */ 349 /* 0x60000000 PCI. */ 350 /* 0x60000000 PCI Self Config. */ 351 /* 0x61000000 PCI Config. */ 352 /* 0x62000000 PCI IO. */ 353 /* 0x63000000 PCI mem 0. */ 354 /* 0x64000000 PCI mem 1. */ 355 /* 0x68000000 PCI mem 2. */ 356 357 /* ??? Hack to map an additional page of ram for the secondary CPU 358 startup code. I guess this works on real hardware because the 359 BootROM happens to be in ROM/flash or in memory that isn't clobbered 360 until after Linux boots the secondary CPUs. */ 361 memory_region_init_ram(ram_hack, NULL, "realview.hack", 0x1000, 362 &error_fatal); 363 memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack); 364 365 realview_binfo.ram_size = ram_size; 366 realview_binfo.nb_cpus = smp_cpus; 367 realview_binfo.board_id = realview_board_id[board_type]; 368 realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0); 369 arm_load_kernel(ARM_CPU(first_cpu), machine, &realview_binfo); 370 } 371 372 static void realview_eb_init(MachineState *machine) 373 { 374 realview_init(machine, BOARD_EB); 375 } 376 377 static void realview_eb_mpcore_init(MachineState *machine) 378 { 379 realview_init(machine, BOARD_EB_MPCORE); 380 } 381 382 static void realview_pb_a8_init(MachineState *machine) 383 { 384 realview_init(machine, BOARD_PB_A8); 385 } 386 387 static void realview_pbx_a9_init(MachineState *machine) 388 { 389 realview_init(machine, BOARD_PBX_A9); 390 } 391 392 static void realview_eb_class_init(ObjectClass *oc, void *data) 393 { 394 MachineClass *mc = MACHINE_CLASS(oc); 395 396 mc->desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)"; 397 mc->init = realview_eb_init; 398 mc->block_default_type = IF_SCSI; 399 mc->ignore_memory_transaction_failures = true; 400 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm926"); 401 } 402 403 static const TypeInfo realview_eb_type = { 404 .name = MACHINE_TYPE_NAME("realview-eb"), 405 .parent = TYPE_MACHINE, 406 .class_init = realview_eb_class_init, 407 }; 408 409 static void realview_eb_mpcore_class_init(ObjectClass *oc, void *data) 410 { 411 MachineClass *mc = MACHINE_CLASS(oc); 412 413 mc->desc = "ARM RealView Emulation Baseboard (ARM11MPCore)"; 414 mc->init = realview_eb_mpcore_init; 415 mc->block_default_type = IF_SCSI; 416 mc->max_cpus = 4; 417 mc->ignore_memory_transaction_failures = true; 418 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm11mpcore"); 419 } 420 421 static const TypeInfo realview_eb_mpcore_type = { 422 .name = MACHINE_TYPE_NAME("realview-eb-mpcore"), 423 .parent = TYPE_MACHINE, 424 .class_init = realview_eb_mpcore_class_init, 425 }; 426 427 static void realview_pb_a8_class_init(ObjectClass *oc, void *data) 428 { 429 MachineClass *mc = MACHINE_CLASS(oc); 430 431 mc->desc = "ARM RealView Platform Baseboard for Cortex-A8"; 432 mc->init = realview_pb_a8_init; 433 mc->ignore_memory_transaction_failures = true; 434 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); 435 } 436 437 static const TypeInfo realview_pb_a8_type = { 438 .name = MACHINE_TYPE_NAME("realview-pb-a8"), 439 .parent = TYPE_MACHINE, 440 .class_init = realview_pb_a8_class_init, 441 }; 442 443 static void realview_pbx_a9_class_init(ObjectClass *oc, void *data) 444 { 445 MachineClass *mc = MACHINE_CLASS(oc); 446 447 mc->desc = "ARM RealView Platform Baseboard Explore for Cortex-A9"; 448 mc->init = realview_pbx_a9_init; 449 mc->max_cpus = 4; 450 mc->ignore_memory_transaction_failures = true; 451 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); 452 } 453 454 static const TypeInfo realview_pbx_a9_type = { 455 .name = MACHINE_TYPE_NAME("realview-pbx-a9"), 456 .parent = TYPE_MACHINE, 457 .class_init = realview_pbx_a9_class_init, 458 }; 459 460 static void realview_machine_init(void) 461 { 462 type_register_static(&realview_eb_type); 463 type_register_static(&realview_eb_mpcore_type); 464 type_register_static(&realview_pb_a8_type); 465 type_register_static(&realview_pbx_a9_type); 466 } 467 468 type_init(realview_machine_init) 469