1 /* 2 * ARM RealView Baseboard System emulation. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "hw/sysbus.h" 11 #include "hw/arm/arm.h" 12 #include "hw/arm/primecell.h" 13 #include "hw/devices.h" 14 #include "hw/pci/pci.h" 15 #include "net/net.h" 16 #include "sysemu/sysemu.h" 17 #include "hw/boards.h" 18 #include "hw/i2c/i2c.h" 19 #include "sysemu/blockdev.h" 20 #include "exec/address-spaces.h" 21 22 #define SMP_BOOT_ADDR 0xe0000000 23 #define SMP_BOOTREG_ADDR 0x10000030 24 25 /* Board init. */ 26 27 static struct arm_boot_info realview_binfo = { 28 .smp_loader_start = SMP_BOOT_ADDR, 29 .smp_bootreg_addr = SMP_BOOTREG_ADDR, 30 }; 31 32 /* The following two lists must be consistent. */ 33 enum realview_board_type { 34 BOARD_EB, 35 BOARD_EB_MPCORE, 36 BOARD_PB_A8, 37 BOARD_PBX_A9, 38 }; 39 40 static const int realview_board_id[] = { 41 0x33b, 42 0x33b, 43 0x769, 44 0x76d 45 }; 46 47 static void realview_init(QEMUMachineInitArgs *args, 48 enum realview_board_type board_type) 49 { 50 ARMCPU *cpu = NULL; 51 CPUARMState *env; 52 MemoryRegion *sysmem = get_system_memory(); 53 MemoryRegion *ram_lo = g_new(MemoryRegion, 1); 54 MemoryRegion *ram_hi = g_new(MemoryRegion, 1); 55 MemoryRegion *ram_alias = g_new(MemoryRegion, 1); 56 MemoryRegion *ram_hack = g_new(MemoryRegion, 1); 57 DeviceState *dev, *sysctl, *gpio2, *pl041; 58 SysBusDevice *busdev; 59 qemu_irq pic[64]; 60 qemu_irq mmc_irq[2]; 61 PCIBus *pci_bus = NULL; 62 NICInfo *nd; 63 i2c_bus *i2c; 64 int n; 65 int done_nic = 0; 66 qemu_irq cpu_irq[4]; 67 int is_mpcore = 0; 68 int is_pb = 0; 69 uint32_t proc_id = 0; 70 uint32_t sys_id; 71 ram_addr_t low_ram_size; 72 ram_addr_t ram_size = args->ram_size; 73 74 switch (board_type) { 75 case BOARD_EB: 76 break; 77 case BOARD_EB_MPCORE: 78 is_mpcore = 1; 79 break; 80 case BOARD_PB_A8: 81 is_pb = 1; 82 break; 83 case BOARD_PBX_A9: 84 is_mpcore = 1; 85 is_pb = 1; 86 break; 87 } 88 for (n = 0; n < smp_cpus; n++) { 89 cpu = cpu_arm_init(args->cpu_model); 90 if (!cpu) { 91 fprintf(stderr, "Unable to find CPU definition\n"); 92 exit(1); 93 } 94 cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ); 95 } 96 env = &cpu->env; 97 if (arm_feature(env, ARM_FEATURE_V7)) { 98 if (is_mpcore) { 99 proc_id = 0x0c000000; 100 } else { 101 proc_id = 0x0e000000; 102 } 103 } else if (arm_feature(env, ARM_FEATURE_V6K)) { 104 proc_id = 0x06000000; 105 } else if (arm_feature(env, ARM_FEATURE_V6)) { 106 proc_id = 0x04000000; 107 } else { 108 proc_id = 0x02000000; 109 } 110 111 if (is_pb && ram_size > 0x20000000) { 112 /* Core tile RAM. */ 113 low_ram_size = ram_size - 0x20000000; 114 ram_size = 0x20000000; 115 memory_region_init_ram(ram_lo, NULL, "realview.lowmem", low_ram_size); 116 vmstate_register_ram_global(ram_lo); 117 memory_region_add_subregion(sysmem, 0x20000000, ram_lo); 118 } 119 120 memory_region_init_ram(ram_hi, NULL, "realview.highmem", ram_size); 121 vmstate_register_ram_global(ram_hi); 122 low_ram_size = ram_size; 123 if (low_ram_size > 0x10000000) 124 low_ram_size = 0x10000000; 125 /* SDRAM at address zero. */ 126 memory_region_init_alias(ram_alias, NULL, "realview.alias", 127 ram_hi, 0, low_ram_size); 128 memory_region_add_subregion(sysmem, 0, ram_alias); 129 if (is_pb) { 130 /* And again at a high address. */ 131 memory_region_add_subregion(sysmem, 0x70000000, ram_hi); 132 } else { 133 ram_size = low_ram_size; 134 } 135 136 sys_id = is_pb ? 0x01780500 : 0xc1400400; 137 sysctl = qdev_create(NULL, "realview_sysctl"); 138 qdev_prop_set_uint32(sysctl, "sys_id", sys_id); 139 qdev_prop_set_uint32(sysctl, "proc_id", proc_id); 140 qdev_init_nofail(sysctl); 141 sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000); 142 143 if (is_mpcore) { 144 hwaddr periphbase; 145 dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore"); 146 qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); 147 qdev_init_nofail(dev); 148 busdev = SYS_BUS_DEVICE(dev); 149 if (is_pb) { 150 periphbase = 0x1f000000; 151 } else { 152 periphbase = 0x10100000; 153 } 154 sysbus_mmio_map(busdev, 0, periphbase); 155 for (n = 0; n < smp_cpus; n++) { 156 sysbus_connect_irq(busdev, n, cpu_irq[n]); 157 } 158 sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL); 159 /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */ 160 realview_binfo.gic_cpu_if_addr = periphbase + 0x100; 161 } else { 162 uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000; 163 /* For now just create the nIRQ GIC, and ignore the others. */ 164 dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]); 165 } 166 for (n = 0; n < 64; n++) { 167 pic[n] = qdev_get_gpio_in(dev, n); 168 } 169 170 pl041 = qdev_create(NULL, "pl041"); 171 qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512); 172 qdev_init_nofail(pl041); 173 sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000); 174 sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[19]); 175 176 sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]); 177 sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]); 178 179 sysbus_create_simple("pl011", 0x10009000, pic[12]); 180 sysbus_create_simple("pl011", 0x1000a000, pic[13]); 181 sysbus_create_simple("pl011", 0x1000b000, pic[14]); 182 sysbus_create_simple("pl011", 0x1000c000, pic[15]); 183 184 /* DMA controller is optional, apparently. */ 185 sysbus_create_simple("pl081", 0x10030000, pic[24]); 186 187 sysbus_create_simple("sp804", 0x10011000, pic[4]); 188 sysbus_create_simple("sp804", 0x10012000, pic[5]); 189 190 sysbus_create_simple("pl061", 0x10013000, pic[6]); 191 sysbus_create_simple("pl061", 0x10014000, pic[7]); 192 gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]); 193 194 sysbus_create_simple("pl111", 0x10020000, pic[23]); 195 196 dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL); 197 /* Wire up MMC card detect and read-only signals. These have 198 * to go to both the PL061 GPIO and the sysctl register. 199 * Note that the PL181 orders these lines (readonly,inserted) 200 * and the PL061 has them the other way about. Also the card 201 * detect line is inverted. 202 */ 203 mmc_irq[0] = qemu_irq_split( 204 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), 205 qdev_get_gpio_in(gpio2, 1)); 206 mmc_irq[1] = qemu_irq_split( 207 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), 208 qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); 209 qdev_connect_gpio_out(dev, 0, mmc_irq[0]); 210 qdev_connect_gpio_out(dev, 1, mmc_irq[1]); 211 212 sysbus_create_simple("pl031", 0x10017000, pic[10]); 213 214 if (!is_pb) { 215 dev = qdev_create(NULL, "realview_pci"); 216 busdev = SYS_BUS_DEVICE(dev); 217 qdev_init_nofail(dev); 218 sysbus_mmio_map(busdev, 0, 0x10019000); /* PCI controller registers */ 219 sysbus_mmio_map(busdev, 1, 0x60000000); /* PCI self-config */ 220 sysbus_mmio_map(busdev, 2, 0x61000000); /* PCI config */ 221 sysbus_mmio_map(busdev, 3, 0x62000000); /* PCI I/O */ 222 sysbus_mmio_map(busdev, 4, 0x63000000); /* PCI memory window 1 */ 223 sysbus_mmio_map(busdev, 5, 0x64000000); /* PCI memory window 2 */ 224 sysbus_mmio_map(busdev, 6, 0x68000000); /* PCI memory window 3 */ 225 sysbus_connect_irq(busdev, 0, pic[48]); 226 sysbus_connect_irq(busdev, 1, pic[49]); 227 sysbus_connect_irq(busdev, 2, pic[50]); 228 sysbus_connect_irq(busdev, 3, pic[51]); 229 pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci"); 230 if (usb_enabled(false)) { 231 pci_create_simple(pci_bus, -1, "pci-ohci"); 232 } 233 n = drive_get_max_bus(IF_SCSI); 234 while (n >= 0) { 235 pci_create_simple(pci_bus, -1, "lsi53c895a"); 236 n--; 237 } 238 } 239 for(n = 0; n < nb_nics; n++) { 240 nd = &nd_table[n]; 241 242 if (!done_nic && (!nd->model || 243 strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) { 244 if (is_pb) { 245 lan9118_init(nd, 0x4e000000, pic[28]); 246 } else { 247 smc91c111_init(nd, 0x4e000000, pic[28]); 248 } 249 done_nic = 1; 250 } else { 251 if (pci_bus) { 252 pci_nic_init_nofail(nd, pci_bus, "rtl8139", NULL); 253 } 254 } 255 } 256 257 dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL); 258 i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c"); 259 i2c_create_slave(i2c, "ds1338", 0x68); 260 261 /* Memory map for RealView Emulation Baseboard: */ 262 /* 0x10000000 System registers. */ 263 /* 0x10001000 System controller. */ 264 /* 0x10002000 Two-Wire Serial Bus. */ 265 /* 0x10003000 Reserved. */ 266 /* 0x10004000 AACI. */ 267 /* 0x10005000 MCI. */ 268 /* 0x10006000 KMI0. */ 269 /* 0x10007000 KMI1. */ 270 /* 0x10008000 Character LCD. (EB) */ 271 /* 0x10009000 UART0. */ 272 /* 0x1000a000 UART1. */ 273 /* 0x1000b000 UART2. */ 274 /* 0x1000c000 UART3. */ 275 /* 0x1000d000 SSPI. */ 276 /* 0x1000e000 SCI. */ 277 /* 0x1000f000 Reserved. */ 278 /* 0x10010000 Watchdog. */ 279 /* 0x10011000 Timer 0+1. */ 280 /* 0x10012000 Timer 2+3. */ 281 /* 0x10013000 GPIO 0. */ 282 /* 0x10014000 GPIO 1. */ 283 /* 0x10015000 GPIO 2. */ 284 /* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */ 285 /* 0x10017000 RTC. */ 286 /* 0x10018000 DMC. */ 287 /* 0x10019000 PCI controller config. */ 288 /* 0x10020000 CLCD. */ 289 /* 0x10030000 DMA Controller. */ 290 /* 0x10040000 GIC1. (EB) */ 291 /* 0x10050000 GIC2. (EB) */ 292 /* 0x10060000 GIC3. (EB) */ 293 /* 0x10070000 GIC4. (EB) */ 294 /* 0x10080000 SMC. */ 295 /* 0x1e000000 GIC1. (PB) */ 296 /* 0x1e001000 GIC2. (PB) */ 297 /* 0x1e002000 GIC3. (PB) */ 298 /* 0x1e003000 GIC4. (PB) */ 299 /* 0x40000000 NOR flash. */ 300 /* 0x44000000 DoC flash. */ 301 /* 0x48000000 SRAM. */ 302 /* 0x4c000000 Configuration flash. */ 303 /* 0x4e000000 Ethernet. */ 304 /* 0x4f000000 USB. */ 305 /* 0x50000000 PISMO. */ 306 /* 0x54000000 PISMO. */ 307 /* 0x58000000 PISMO. */ 308 /* 0x5c000000 PISMO. */ 309 /* 0x60000000 PCI. */ 310 /* 0x60000000 PCI Self Config. */ 311 /* 0x61000000 PCI Config. */ 312 /* 0x62000000 PCI IO. */ 313 /* 0x63000000 PCI mem 0. */ 314 /* 0x64000000 PCI mem 1. */ 315 /* 0x68000000 PCI mem 2. */ 316 317 /* ??? Hack to map an additional page of ram for the secondary CPU 318 startup code. I guess this works on real hardware because the 319 BootROM happens to be in ROM/flash or in memory that isn't clobbered 320 until after Linux boots the secondary CPUs. */ 321 memory_region_init_ram(ram_hack, NULL, "realview.hack", 0x1000); 322 vmstate_register_ram_global(ram_hack); 323 memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack); 324 325 realview_binfo.ram_size = ram_size; 326 realview_binfo.kernel_filename = args->kernel_filename; 327 realview_binfo.kernel_cmdline = args->kernel_cmdline; 328 realview_binfo.initrd_filename = args->initrd_filename; 329 realview_binfo.nb_cpus = smp_cpus; 330 realview_binfo.board_id = realview_board_id[board_type]; 331 realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0); 332 arm_load_kernel(ARM_CPU(first_cpu), &realview_binfo); 333 } 334 335 static void realview_eb_init(QEMUMachineInitArgs *args) 336 { 337 if (!args->cpu_model) { 338 args->cpu_model = "arm926"; 339 } 340 realview_init(args, BOARD_EB); 341 } 342 343 static void realview_eb_mpcore_init(QEMUMachineInitArgs *args) 344 { 345 if (!args->cpu_model) { 346 args->cpu_model = "arm11mpcore"; 347 } 348 realview_init(args, BOARD_EB_MPCORE); 349 } 350 351 static void realview_pb_a8_init(QEMUMachineInitArgs *args) 352 { 353 if (!args->cpu_model) { 354 args->cpu_model = "cortex-a8"; 355 } 356 realview_init(args, BOARD_PB_A8); 357 } 358 359 static void realview_pbx_a9_init(QEMUMachineInitArgs *args) 360 { 361 if (!args->cpu_model) { 362 args->cpu_model = "cortex-a9"; 363 } 364 realview_init(args, BOARD_PBX_A9); 365 } 366 367 static QEMUMachine realview_eb_machine = { 368 .name = "realview-eb", 369 .desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)", 370 .init = realview_eb_init, 371 .block_default_type = IF_SCSI, 372 DEFAULT_MACHINE_OPTIONS, 373 }; 374 375 static QEMUMachine realview_eb_mpcore_machine = { 376 .name = "realview-eb-mpcore", 377 .desc = "ARM RealView Emulation Baseboard (ARM11MPCore)", 378 .init = realview_eb_mpcore_init, 379 .block_default_type = IF_SCSI, 380 .max_cpus = 4, 381 DEFAULT_MACHINE_OPTIONS, 382 }; 383 384 static QEMUMachine realview_pb_a8_machine = { 385 .name = "realview-pb-a8", 386 .desc = "ARM RealView Platform Baseboard for Cortex-A8", 387 .init = realview_pb_a8_init, 388 DEFAULT_MACHINE_OPTIONS, 389 }; 390 391 static QEMUMachine realview_pbx_a9_machine = { 392 .name = "realview-pbx-a9", 393 .desc = "ARM RealView Platform Baseboard Explore for Cortex-A9", 394 .init = realview_pbx_a9_init, 395 .block_default_type = IF_SCSI, 396 .max_cpus = 4, 397 DEFAULT_MACHINE_OPTIONS, 398 }; 399 400 static void realview_machine_init(void) 401 { 402 qemu_register_machine(&realview_eb_machine); 403 qemu_register_machine(&realview_eb_mpcore_machine); 404 qemu_register_machine(&realview_pb_a8_machine); 405 qemu_register_machine(&realview_pbx_a9_machine); 406 } 407 408 machine_init(realview_machine_init); 409