1 /* 2 * ARM RealView Baseboard System emulation. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "qapi/error.h" 12 #include "cpu.h" 13 #include "hw/sysbus.h" 14 #include "hw/arm/boot.h" 15 #include "hw/arm/primecell.h" 16 #include "hw/net/lan9118.h" 17 #include "hw/net/smc91c111.h" 18 #include "hw/pci/pci.h" 19 #include "net/net.h" 20 #include "sysemu/sysemu.h" 21 #include "hw/boards.h" 22 #include "hw/i2c/i2c.h" 23 #include "exec/address-spaces.h" 24 #include "qemu/error-report.h" 25 #include "hw/char/pl011.h" 26 #include "hw/cpu/a9mpcore.h" 27 #include "hw/intc/realview_gic.h" 28 #include "hw/irq.h" 29 30 #define SMP_BOOT_ADDR 0xe0000000 31 #define SMP_BOOTREG_ADDR 0x10000030 32 33 /* Board init. */ 34 35 static struct arm_boot_info realview_binfo = { 36 .smp_loader_start = SMP_BOOT_ADDR, 37 .smp_bootreg_addr = SMP_BOOTREG_ADDR, 38 }; 39 40 /* The following two lists must be consistent. */ 41 enum realview_board_type { 42 BOARD_EB, 43 BOARD_EB_MPCORE, 44 BOARD_PB_A8, 45 BOARD_PBX_A9, 46 }; 47 48 static const int realview_board_id[] = { 49 0x33b, 50 0x33b, 51 0x769, 52 0x76d 53 }; 54 55 static void realview_init(MachineState *machine, 56 enum realview_board_type board_type) 57 { 58 ARMCPU *cpu = NULL; 59 CPUARMState *env; 60 MemoryRegion *sysmem = get_system_memory(); 61 MemoryRegion *ram_lo; 62 MemoryRegion *ram_hi = g_new(MemoryRegion, 1); 63 MemoryRegion *ram_alias = g_new(MemoryRegion, 1); 64 MemoryRegion *ram_hack = g_new(MemoryRegion, 1); 65 DeviceState *dev, *sysctl, *gpio2, *pl041; 66 SysBusDevice *busdev; 67 qemu_irq pic[64]; 68 qemu_irq mmc_irq[2]; 69 PCIBus *pci_bus = NULL; 70 NICInfo *nd; 71 I2CBus *i2c; 72 int n; 73 unsigned int smp_cpus = machine->smp.cpus; 74 int done_nic = 0; 75 qemu_irq cpu_irq[4]; 76 int is_mpcore = 0; 77 int is_pb = 0; 78 uint32_t proc_id = 0; 79 uint32_t sys_id; 80 ram_addr_t low_ram_size; 81 ram_addr_t ram_size = machine->ram_size; 82 hwaddr periphbase = 0; 83 84 switch (board_type) { 85 case BOARD_EB: 86 break; 87 case BOARD_EB_MPCORE: 88 is_mpcore = 1; 89 periphbase = 0x10100000; 90 break; 91 case BOARD_PB_A8: 92 is_pb = 1; 93 break; 94 case BOARD_PBX_A9: 95 is_mpcore = 1; 96 is_pb = 1; 97 periphbase = 0x1f000000; 98 break; 99 } 100 101 for (n = 0; n < smp_cpus; n++) { 102 Object *cpuobj = object_new(machine->cpu_type); 103 104 /* By default A9,A15 and ARM1176 CPUs have EL3 enabled. This board 105 * does not currently support EL3 so the CPU EL3 property is disabled 106 * before realization. 107 */ 108 if (object_property_find(cpuobj, "has_el3", NULL)) { 109 object_property_set_bool(cpuobj, false, "has_el3", &error_fatal); 110 } 111 112 if (is_pb && is_mpcore) { 113 object_property_set_int(cpuobj, periphbase, "reset-cbar", 114 &error_fatal); 115 } 116 117 qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); 118 119 cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpuobj), ARM_CPU_IRQ); 120 } 121 cpu = ARM_CPU(first_cpu); 122 env = &cpu->env; 123 if (arm_feature(env, ARM_FEATURE_V7)) { 124 if (is_mpcore) { 125 proc_id = 0x0c000000; 126 } else { 127 proc_id = 0x0e000000; 128 } 129 } else if (arm_feature(env, ARM_FEATURE_V6K)) { 130 proc_id = 0x06000000; 131 } else if (arm_feature(env, ARM_FEATURE_V6)) { 132 proc_id = 0x04000000; 133 } else { 134 proc_id = 0x02000000; 135 } 136 137 if (is_pb && ram_size > 0x20000000) { 138 /* Core tile RAM. */ 139 ram_lo = g_new(MemoryRegion, 1); 140 low_ram_size = ram_size - 0x20000000; 141 ram_size = 0x20000000; 142 memory_region_init_ram(ram_lo, NULL, "realview.lowmem", low_ram_size, 143 &error_fatal); 144 memory_region_add_subregion(sysmem, 0x20000000, ram_lo); 145 } 146 147 memory_region_init_ram(ram_hi, NULL, "realview.highmem", ram_size, 148 &error_fatal); 149 low_ram_size = ram_size; 150 if (low_ram_size > 0x10000000) 151 low_ram_size = 0x10000000; 152 /* SDRAM at address zero. */ 153 memory_region_init_alias(ram_alias, NULL, "realview.alias", 154 ram_hi, 0, low_ram_size); 155 memory_region_add_subregion(sysmem, 0, ram_alias); 156 if (is_pb) { 157 /* And again at a high address. */ 158 memory_region_add_subregion(sysmem, 0x70000000, ram_hi); 159 } else { 160 ram_size = low_ram_size; 161 } 162 163 sys_id = is_pb ? 0x01780500 : 0xc1400400; 164 sysctl = qdev_new("realview_sysctl"); 165 qdev_prop_set_uint32(sysctl, "sys_id", sys_id); 166 qdev_prop_set_uint32(sysctl, "proc_id", proc_id); 167 sysbus_realize_and_unref(SYS_BUS_DEVICE(sysctl), &error_fatal); 168 sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000); 169 170 if (is_mpcore) { 171 dev = qdev_new(is_pb ? TYPE_A9MPCORE_PRIV : "realview_mpcore"); 172 qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); 173 busdev = SYS_BUS_DEVICE(dev); 174 sysbus_realize_and_unref(busdev, &error_fatal); 175 sysbus_mmio_map(busdev, 0, periphbase); 176 for (n = 0; n < smp_cpus; n++) { 177 sysbus_connect_irq(busdev, n, cpu_irq[n]); 178 } 179 sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL); 180 /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */ 181 realview_binfo.gic_cpu_if_addr = periphbase + 0x100; 182 } else { 183 uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000; 184 /* For now just create the nIRQ GIC, and ignore the others. */ 185 dev = sysbus_create_simple(TYPE_REALVIEW_GIC, gic_addr, cpu_irq[0]); 186 } 187 for (n = 0; n < 64; n++) { 188 pic[n] = qdev_get_gpio_in(dev, n); 189 } 190 191 pl041 = qdev_new("pl041"); 192 qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512); 193 sysbus_realize_and_unref(SYS_BUS_DEVICE(pl041), &error_fatal); 194 sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000); 195 sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[19]); 196 197 sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]); 198 sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]); 199 200 pl011_create(0x10009000, pic[12], serial_hd(0)); 201 pl011_create(0x1000a000, pic[13], serial_hd(1)); 202 pl011_create(0x1000b000, pic[14], serial_hd(2)); 203 pl011_create(0x1000c000, pic[15], serial_hd(3)); 204 205 /* DMA controller is optional, apparently. */ 206 dev = qdev_new("pl081"); 207 object_property_set_link(OBJECT(dev), OBJECT(sysmem), "downstream", 208 &error_fatal); 209 busdev = SYS_BUS_DEVICE(dev); 210 sysbus_realize_and_unref(busdev, &error_fatal); 211 sysbus_mmio_map(busdev, 0, 0x10030000); 212 sysbus_connect_irq(busdev, 0, pic[24]); 213 214 sysbus_create_simple("sp804", 0x10011000, pic[4]); 215 sysbus_create_simple("sp804", 0x10012000, pic[5]); 216 217 sysbus_create_simple("pl061", 0x10013000, pic[6]); 218 sysbus_create_simple("pl061", 0x10014000, pic[7]); 219 gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]); 220 221 sysbus_create_simple("pl111", 0x10020000, pic[23]); 222 223 dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL); 224 /* Wire up MMC card detect and read-only signals. These have 225 * to go to both the PL061 GPIO and the sysctl register. 226 * Note that the PL181 orders these lines (readonly,inserted) 227 * and the PL061 has them the other way about. Also the card 228 * detect line is inverted. 229 */ 230 mmc_irq[0] = qemu_irq_split( 231 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), 232 qdev_get_gpio_in(gpio2, 1)); 233 mmc_irq[1] = qemu_irq_split( 234 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), 235 qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); 236 qdev_connect_gpio_out(dev, 0, mmc_irq[0]); 237 qdev_connect_gpio_out(dev, 1, mmc_irq[1]); 238 239 sysbus_create_simple("pl031", 0x10017000, pic[10]); 240 241 if (!is_pb) { 242 dev = qdev_new("realview_pci"); 243 busdev = SYS_BUS_DEVICE(dev); 244 sysbus_realize_and_unref(busdev, &error_fatal); 245 sysbus_mmio_map(busdev, 0, 0x10019000); /* PCI controller registers */ 246 sysbus_mmio_map(busdev, 1, 0x60000000); /* PCI self-config */ 247 sysbus_mmio_map(busdev, 2, 0x61000000); /* PCI config */ 248 sysbus_mmio_map(busdev, 3, 0x62000000); /* PCI I/O */ 249 sysbus_mmio_map(busdev, 4, 0x63000000); /* PCI memory window 1 */ 250 sysbus_mmio_map(busdev, 5, 0x64000000); /* PCI memory window 2 */ 251 sysbus_mmio_map(busdev, 6, 0x68000000); /* PCI memory window 3 */ 252 sysbus_connect_irq(busdev, 0, pic[48]); 253 sysbus_connect_irq(busdev, 1, pic[49]); 254 sysbus_connect_irq(busdev, 2, pic[50]); 255 sysbus_connect_irq(busdev, 3, pic[51]); 256 pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci"); 257 if (machine_usb(machine)) { 258 pci_create_simple(pci_bus, -1, "pci-ohci"); 259 } 260 n = drive_get_max_bus(IF_SCSI); 261 while (n >= 0) { 262 dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a")); 263 lsi53c8xx_handle_legacy_cmdline(dev); 264 n--; 265 } 266 } 267 for(n = 0; n < nb_nics; n++) { 268 nd = &nd_table[n]; 269 270 if (!done_nic && (!nd->model || 271 strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) { 272 if (is_pb) { 273 lan9118_init(nd, 0x4e000000, pic[28]); 274 } else { 275 smc91c111_init(nd, 0x4e000000, pic[28]); 276 } 277 done_nic = 1; 278 } else { 279 if (pci_bus) { 280 pci_nic_init_nofail(nd, pci_bus, "rtl8139", NULL); 281 } 282 } 283 } 284 285 dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL); 286 i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); 287 i2c_create_slave(i2c, "ds1338", 0x68); 288 289 /* Memory map for RealView Emulation Baseboard: */ 290 /* 0x10000000 System registers. */ 291 /* 0x10001000 System controller. */ 292 /* 0x10002000 Two-Wire Serial Bus. */ 293 /* 0x10003000 Reserved. */ 294 /* 0x10004000 AACI. */ 295 /* 0x10005000 MCI. */ 296 /* 0x10006000 KMI0. */ 297 /* 0x10007000 KMI1. */ 298 /* 0x10008000 Character LCD. (EB) */ 299 /* 0x10009000 UART0. */ 300 /* 0x1000a000 UART1. */ 301 /* 0x1000b000 UART2. */ 302 /* 0x1000c000 UART3. */ 303 /* 0x1000d000 SSPI. */ 304 /* 0x1000e000 SCI. */ 305 /* 0x1000f000 Reserved. */ 306 /* 0x10010000 Watchdog. */ 307 /* 0x10011000 Timer 0+1. */ 308 /* 0x10012000 Timer 2+3. */ 309 /* 0x10013000 GPIO 0. */ 310 /* 0x10014000 GPIO 1. */ 311 /* 0x10015000 GPIO 2. */ 312 /* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */ 313 /* 0x10017000 RTC. */ 314 /* 0x10018000 DMC. */ 315 /* 0x10019000 PCI controller config. */ 316 /* 0x10020000 CLCD. */ 317 /* 0x10030000 DMA Controller. */ 318 /* 0x10040000 GIC1. (EB) */ 319 /* 0x10050000 GIC2. (EB) */ 320 /* 0x10060000 GIC3. (EB) */ 321 /* 0x10070000 GIC4. (EB) */ 322 /* 0x10080000 SMC. */ 323 /* 0x1e000000 GIC1. (PB) */ 324 /* 0x1e001000 GIC2. (PB) */ 325 /* 0x1e002000 GIC3. (PB) */ 326 /* 0x1e003000 GIC4. (PB) */ 327 /* 0x40000000 NOR flash. */ 328 /* 0x44000000 DoC flash. */ 329 /* 0x48000000 SRAM. */ 330 /* 0x4c000000 Configuration flash. */ 331 /* 0x4e000000 Ethernet. */ 332 /* 0x4f000000 USB. */ 333 /* 0x50000000 PISMO. */ 334 /* 0x54000000 PISMO. */ 335 /* 0x58000000 PISMO. */ 336 /* 0x5c000000 PISMO. */ 337 /* 0x60000000 PCI. */ 338 /* 0x60000000 PCI Self Config. */ 339 /* 0x61000000 PCI Config. */ 340 /* 0x62000000 PCI IO. */ 341 /* 0x63000000 PCI mem 0. */ 342 /* 0x64000000 PCI mem 1. */ 343 /* 0x68000000 PCI mem 2. */ 344 345 /* ??? Hack to map an additional page of ram for the secondary CPU 346 startup code. I guess this works on real hardware because the 347 BootROM happens to be in ROM/flash or in memory that isn't clobbered 348 until after Linux boots the secondary CPUs. */ 349 memory_region_init_ram(ram_hack, NULL, "realview.hack", 0x1000, 350 &error_fatal); 351 memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack); 352 353 realview_binfo.ram_size = ram_size; 354 realview_binfo.nb_cpus = smp_cpus; 355 realview_binfo.board_id = realview_board_id[board_type]; 356 realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0); 357 arm_load_kernel(ARM_CPU(first_cpu), machine, &realview_binfo); 358 } 359 360 static void realview_eb_init(MachineState *machine) 361 { 362 realview_init(machine, BOARD_EB); 363 } 364 365 static void realview_eb_mpcore_init(MachineState *machine) 366 { 367 realview_init(machine, BOARD_EB_MPCORE); 368 } 369 370 static void realview_pb_a8_init(MachineState *machine) 371 { 372 realview_init(machine, BOARD_PB_A8); 373 } 374 375 static void realview_pbx_a9_init(MachineState *machine) 376 { 377 realview_init(machine, BOARD_PBX_A9); 378 } 379 380 static void realview_eb_class_init(ObjectClass *oc, void *data) 381 { 382 MachineClass *mc = MACHINE_CLASS(oc); 383 384 mc->desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)"; 385 mc->init = realview_eb_init; 386 mc->block_default_type = IF_SCSI; 387 mc->ignore_memory_transaction_failures = true; 388 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm926"); 389 } 390 391 static const TypeInfo realview_eb_type = { 392 .name = MACHINE_TYPE_NAME("realview-eb"), 393 .parent = TYPE_MACHINE, 394 .class_init = realview_eb_class_init, 395 }; 396 397 static void realview_eb_mpcore_class_init(ObjectClass *oc, void *data) 398 { 399 MachineClass *mc = MACHINE_CLASS(oc); 400 401 mc->desc = "ARM RealView Emulation Baseboard (ARM11MPCore)"; 402 mc->init = realview_eb_mpcore_init; 403 mc->block_default_type = IF_SCSI; 404 mc->max_cpus = 4; 405 mc->ignore_memory_transaction_failures = true; 406 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm11mpcore"); 407 } 408 409 static const TypeInfo realview_eb_mpcore_type = { 410 .name = MACHINE_TYPE_NAME("realview-eb-mpcore"), 411 .parent = TYPE_MACHINE, 412 .class_init = realview_eb_mpcore_class_init, 413 }; 414 415 static void realview_pb_a8_class_init(ObjectClass *oc, void *data) 416 { 417 MachineClass *mc = MACHINE_CLASS(oc); 418 419 mc->desc = "ARM RealView Platform Baseboard for Cortex-A8"; 420 mc->init = realview_pb_a8_init; 421 mc->ignore_memory_transaction_failures = true; 422 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); 423 } 424 425 static const TypeInfo realview_pb_a8_type = { 426 .name = MACHINE_TYPE_NAME("realview-pb-a8"), 427 .parent = TYPE_MACHINE, 428 .class_init = realview_pb_a8_class_init, 429 }; 430 431 static void realview_pbx_a9_class_init(ObjectClass *oc, void *data) 432 { 433 MachineClass *mc = MACHINE_CLASS(oc); 434 435 mc->desc = "ARM RealView Platform Baseboard Explore for Cortex-A9"; 436 mc->init = realview_pbx_a9_init; 437 mc->max_cpus = 4; 438 mc->ignore_memory_transaction_failures = true; 439 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); 440 } 441 442 static const TypeInfo realview_pbx_a9_type = { 443 .name = MACHINE_TYPE_NAME("realview-pbx-a9"), 444 .parent = TYPE_MACHINE, 445 .class_init = realview_pbx_a9_class_init, 446 }; 447 448 static void realview_machine_init(void) 449 { 450 type_register_static(&realview_eb_type); 451 type_register_static(&realview_eb_mpcore_type); 452 type_register_static(&realview_pb_a8_type); 453 type_register_static(&realview_pbx_a9_type); 454 } 455 456 type_init(realview_machine_init) 457