1 /* 2 * ARM RealView Baseboard System emulation. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "qapi/error.h" 12 #include "cpu.h" 13 #include "hw/sysbus.h" 14 #include "hw/arm/boot.h" 15 #include "hw/arm/primecell.h" 16 #include "hw/core/split-irq.h" 17 #include "hw/net/lan9118.h" 18 #include "hw/net/smc91c111.h" 19 #include "hw/pci/pci.h" 20 #include "hw/qdev-core.h" 21 #include "net/net.h" 22 #include "sysemu/sysemu.h" 23 #include "hw/boards.h" 24 #include "hw/i2c/i2c.h" 25 #include "qemu/error-report.h" 26 #include "hw/char/pl011.h" 27 #include "hw/cpu/a9mpcore.h" 28 #include "hw/intc/realview_gic.h" 29 #include "hw/irq.h" 30 #include "hw/i2c/arm_sbcon_i2c.h" 31 #include "hw/sd/sd.h" 32 #include "audio/audio.h" 33 34 #define SMP_BOOT_ADDR 0xe0000000 35 #define SMP_BOOTREG_ADDR 0x10000030 36 37 /* Board init. */ 38 39 static struct arm_boot_info realview_binfo = { 40 .smp_loader_start = SMP_BOOT_ADDR, 41 .smp_bootreg_addr = SMP_BOOTREG_ADDR, 42 }; 43 44 /* The following two lists must be consistent. */ 45 enum realview_board_type { 46 BOARD_EB, 47 BOARD_EB_MPCORE, 48 BOARD_PB_A8, 49 BOARD_PBX_A9, 50 }; 51 52 static const int realview_board_id[] = { 53 0x33b, 54 0x33b, 55 0x769, 56 0x76d 57 }; 58 59 static void split_irq_from_named(DeviceState *src, const char* outname, 60 qemu_irq out1, qemu_irq out2) { 61 DeviceState *splitter = qdev_new(TYPE_SPLIT_IRQ); 62 63 qdev_prop_set_uint32(splitter, "num-lines", 2); 64 65 qdev_realize_and_unref(splitter, NULL, &error_fatal); 66 67 qdev_connect_gpio_out(splitter, 0, out1); 68 qdev_connect_gpio_out(splitter, 1, out2); 69 qdev_connect_gpio_out_named(src, outname, 0, 70 qdev_get_gpio_in(splitter, 0)); 71 } 72 73 static void realview_init(MachineState *machine, 74 enum realview_board_type board_type) 75 { 76 ARMCPU *cpu = NULL; 77 CPUARMState *env; 78 MemoryRegion *sysmem = get_system_memory(); 79 MemoryRegion *ram_lo; 80 MemoryRegion *ram_hi = g_new(MemoryRegion, 1); 81 MemoryRegion *ram_alias = g_new(MemoryRegion, 1); 82 MemoryRegion *ram_hack = g_new(MemoryRegion, 1); 83 DeviceState *dev, *sysctl, *gpio2, *pl041; 84 SysBusDevice *busdev; 85 qemu_irq pic[64]; 86 PCIBus *pci_bus = NULL; 87 NICInfo *nd; 88 DriveInfo *dinfo; 89 I2CBus *i2c; 90 int n; 91 unsigned int smp_cpus = machine->smp.cpus; 92 int done_nic = 0; 93 qemu_irq cpu_irq[4]; 94 int is_mpcore = 0; 95 int is_pb = 0; 96 uint32_t proc_id = 0; 97 uint32_t sys_id; 98 ram_addr_t low_ram_size; 99 ram_addr_t ram_size = machine->ram_size; 100 hwaddr periphbase = 0; 101 102 switch (board_type) { 103 case BOARD_EB: 104 break; 105 case BOARD_EB_MPCORE: 106 is_mpcore = 1; 107 periphbase = 0x10100000; 108 break; 109 case BOARD_PB_A8: 110 is_pb = 1; 111 break; 112 case BOARD_PBX_A9: 113 is_mpcore = 1; 114 is_pb = 1; 115 periphbase = 0x1f000000; 116 break; 117 } 118 119 for (n = 0; n < smp_cpus; n++) { 120 Object *cpuobj = object_new(machine->cpu_type); 121 122 /* By default A9,A15 and ARM1176 CPUs have EL3 enabled. This board 123 * does not currently support EL3 so the CPU EL3 property is disabled 124 * before realization. 125 */ 126 if (object_property_find(cpuobj, "has_el3")) { 127 object_property_set_bool(cpuobj, "has_el3", false, &error_fatal); 128 } 129 130 if (is_pb && is_mpcore) { 131 object_property_set_int(cpuobj, "reset-cbar", periphbase, 132 &error_fatal); 133 } 134 135 qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); 136 137 cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpuobj), ARM_CPU_IRQ); 138 } 139 cpu = ARM_CPU(first_cpu); 140 env = &cpu->env; 141 if (arm_feature(env, ARM_FEATURE_V7)) { 142 if (is_mpcore) { 143 proc_id = 0x0c000000; 144 } else { 145 proc_id = 0x0e000000; 146 } 147 } else if (arm_feature(env, ARM_FEATURE_V6K)) { 148 proc_id = 0x06000000; 149 } else if (arm_feature(env, ARM_FEATURE_V6)) { 150 proc_id = 0x04000000; 151 } else { 152 proc_id = 0x02000000; 153 } 154 155 if (is_pb && ram_size > 0x20000000) { 156 /* Core tile RAM. */ 157 ram_lo = g_new(MemoryRegion, 1); 158 low_ram_size = ram_size - 0x20000000; 159 ram_size = 0x20000000; 160 memory_region_init_ram(ram_lo, NULL, "realview.lowmem", low_ram_size, 161 &error_fatal); 162 memory_region_add_subregion(sysmem, 0x20000000, ram_lo); 163 } 164 165 memory_region_init_ram(ram_hi, NULL, "realview.highmem", ram_size, 166 &error_fatal); 167 low_ram_size = ram_size; 168 if (low_ram_size > 0x10000000) 169 low_ram_size = 0x10000000; 170 /* SDRAM at address zero. */ 171 memory_region_init_alias(ram_alias, NULL, "realview.alias", 172 ram_hi, 0, low_ram_size); 173 memory_region_add_subregion(sysmem, 0, ram_alias); 174 if (is_pb) { 175 /* And again at a high address. */ 176 memory_region_add_subregion(sysmem, 0x70000000, ram_hi); 177 } else { 178 ram_size = low_ram_size; 179 } 180 181 sys_id = is_pb ? 0x01780500 : 0xc1400400; 182 sysctl = qdev_new("realview_sysctl"); 183 qdev_prop_set_uint32(sysctl, "sys_id", sys_id); 184 qdev_prop_set_uint32(sysctl, "proc_id", proc_id); 185 sysbus_realize_and_unref(SYS_BUS_DEVICE(sysctl), &error_fatal); 186 sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000); 187 188 if (is_mpcore) { 189 dev = qdev_new(is_pb ? TYPE_A9MPCORE_PRIV : "realview_mpcore"); 190 qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); 191 busdev = SYS_BUS_DEVICE(dev); 192 sysbus_realize_and_unref(busdev, &error_fatal); 193 sysbus_mmio_map(busdev, 0, periphbase); 194 for (n = 0; n < smp_cpus; n++) { 195 sysbus_connect_irq(busdev, n, cpu_irq[n]); 196 } 197 sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL); 198 /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */ 199 realview_binfo.gic_cpu_if_addr = periphbase + 0x100; 200 } else { 201 uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000; 202 /* For now just create the nIRQ GIC, and ignore the others. */ 203 dev = sysbus_create_simple(TYPE_REALVIEW_GIC, gic_addr, cpu_irq[0]); 204 } 205 for (n = 0; n < 64; n++) { 206 pic[n] = qdev_get_gpio_in(dev, n); 207 } 208 209 pl041 = qdev_new("pl041"); 210 qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512); 211 if (machine->audiodev) { 212 qdev_prop_set_string(pl041, "audiodev", machine->audiodev); 213 } 214 sysbus_realize_and_unref(SYS_BUS_DEVICE(pl041), &error_fatal); 215 sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000); 216 sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[19]); 217 218 sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]); 219 sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]); 220 221 pl011_create(0x10009000, pic[12], serial_hd(0)); 222 pl011_create(0x1000a000, pic[13], serial_hd(1)); 223 pl011_create(0x1000b000, pic[14], serial_hd(2)); 224 pl011_create(0x1000c000, pic[15], serial_hd(3)); 225 226 /* DMA controller is optional, apparently. */ 227 dev = qdev_new("pl081"); 228 object_property_set_link(OBJECT(dev), "downstream", OBJECT(sysmem), 229 &error_fatal); 230 busdev = SYS_BUS_DEVICE(dev); 231 sysbus_realize_and_unref(busdev, &error_fatal); 232 sysbus_mmio_map(busdev, 0, 0x10030000); 233 sysbus_connect_irq(busdev, 0, pic[24]); 234 235 sysbus_create_simple("sp804", 0x10011000, pic[4]); 236 sysbus_create_simple("sp804", 0x10012000, pic[5]); 237 238 sysbus_create_simple("pl061", 0x10013000, pic[6]); 239 sysbus_create_simple("pl061", 0x10014000, pic[7]); 240 gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]); 241 242 sysbus_create_simple("pl111", 0x10020000, pic[23]); 243 244 dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL); 245 /* Wire up MMC card detect and read-only signals. These have 246 * to go to both the PL061 GPIO and the sysctl register. 247 * Note that the PL181 orders these lines (readonly,inserted) 248 * and the PL061 has them the other way about. Also the card 249 * detect line is inverted. 250 */ 251 split_irq_from_named(dev, "card-read-only", 252 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), 253 qdev_get_gpio_in(gpio2, 1)); 254 255 split_irq_from_named(dev, "card-inserted", 256 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), 257 qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); 258 259 dinfo = drive_get(IF_SD, 0, 0); 260 if (dinfo) { 261 DeviceState *card; 262 263 card = qdev_new(TYPE_SD_CARD); 264 qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), 265 &error_fatal); 266 qdev_realize_and_unref(card, qdev_get_child_bus(dev, "sd-bus"), 267 &error_fatal); 268 } 269 270 sysbus_create_simple("pl031", 0x10017000, pic[10]); 271 272 if (!is_pb) { 273 dev = qdev_new("realview_pci"); 274 busdev = SYS_BUS_DEVICE(dev); 275 sysbus_realize_and_unref(busdev, &error_fatal); 276 sysbus_mmio_map(busdev, 0, 0x10019000); /* PCI controller registers */ 277 sysbus_mmio_map(busdev, 1, 0x60000000); /* PCI self-config */ 278 sysbus_mmio_map(busdev, 2, 0x61000000); /* PCI config */ 279 sysbus_mmio_map(busdev, 3, 0x62000000); /* PCI I/O */ 280 sysbus_mmio_map(busdev, 4, 0x63000000); /* PCI memory window 1 */ 281 sysbus_mmio_map(busdev, 5, 0x64000000); /* PCI memory window 2 */ 282 sysbus_mmio_map(busdev, 6, 0x68000000); /* PCI memory window 3 */ 283 sysbus_connect_irq(busdev, 0, pic[48]); 284 sysbus_connect_irq(busdev, 1, pic[49]); 285 sysbus_connect_irq(busdev, 2, pic[50]); 286 sysbus_connect_irq(busdev, 3, pic[51]); 287 pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci"); 288 if (machine_usb(machine)) { 289 pci_create_simple(pci_bus, -1, "pci-ohci"); 290 } 291 n = drive_get_max_bus(IF_SCSI); 292 while (n >= 0) { 293 dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a")); 294 lsi53c8xx_handle_legacy_cmdline(dev); 295 n--; 296 } 297 } 298 for(n = 0; n < nb_nics; n++) { 299 nd = &nd_table[n]; 300 301 if (!done_nic && (!nd->model || 302 strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) { 303 if (is_pb) { 304 lan9118_init(nd, 0x4e000000, pic[28]); 305 } else { 306 smc91c111_init(nd, 0x4e000000, pic[28]); 307 } 308 done_nic = 1; 309 } else { 310 if (pci_bus) { 311 pci_nic_init_nofail(nd, pci_bus, "rtl8139", NULL); 312 } 313 } 314 } 315 316 dev = sysbus_create_simple(TYPE_ARM_SBCON_I2C, 0x10002000, NULL); 317 i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); 318 i2c_slave_create_simple(i2c, "ds1338", 0x68); 319 320 /* Memory map for RealView Emulation Baseboard: */ 321 /* 0x10000000 System registers. */ 322 /* 0x10001000 System controller. */ 323 /* 0x10002000 Two-Wire Serial Bus. */ 324 /* 0x10003000 Reserved. */ 325 /* 0x10004000 AACI. */ 326 /* 0x10005000 MCI. */ 327 /* 0x10006000 KMI0. */ 328 /* 0x10007000 KMI1. */ 329 /* 0x10008000 Character LCD. (EB) */ 330 /* 0x10009000 UART0. */ 331 /* 0x1000a000 UART1. */ 332 /* 0x1000b000 UART2. */ 333 /* 0x1000c000 UART3. */ 334 /* 0x1000d000 SSPI. */ 335 /* 0x1000e000 SCI. */ 336 /* 0x1000f000 Reserved. */ 337 /* 0x10010000 Watchdog. */ 338 /* 0x10011000 Timer 0+1. */ 339 /* 0x10012000 Timer 2+3. */ 340 /* 0x10013000 GPIO 0. */ 341 /* 0x10014000 GPIO 1. */ 342 /* 0x10015000 GPIO 2. */ 343 /* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */ 344 /* 0x10017000 RTC. */ 345 /* 0x10018000 DMC. */ 346 /* 0x10019000 PCI controller config. */ 347 /* 0x10020000 CLCD. */ 348 /* 0x10030000 DMA Controller. */ 349 /* 0x10040000 GIC1. (EB) */ 350 /* 0x10050000 GIC2. (EB) */ 351 /* 0x10060000 GIC3. (EB) */ 352 /* 0x10070000 GIC4. (EB) */ 353 /* 0x10080000 SMC. */ 354 /* 0x1e000000 GIC1. (PB) */ 355 /* 0x1e001000 GIC2. (PB) */ 356 /* 0x1e002000 GIC3. (PB) */ 357 /* 0x1e003000 GIC4. (PB) */ 358 /* 0x40000000 NOR flash. */ 359 /* 0x44000000 DoC flash. */ 360 /* 0x48000000 SRAM. */ 361 /* 0x4c000000 Configuration flash. */ 362 /* 0x4e000000 Ethernet. */ 363 /* 0x4f000000 USB. */ 364 /* 0x50000000 PISMO. */ 365 /* 0x54000000 PISMO. */ 366 /* 0x58000000 PISMO. */ 367 /* 0x5c000000 PISMO. */ 368 /* 0x60000000 PCI. */ 369 /* 0x60000000 PCI Self Config. */ 370 /* 0x61000000 PCI Config. */ 371 /* 0x62000000 PCI IO. */ 372 /* 0x63000000 PCI mem 0. */ 373 /* 0x64000000 PCI mem 1. */ 374 /* 0x68000000 PCI mem 2. */ 375 376 /* ??? Hack to map an additional page of ram for the secondary CPU 377 startup code. I guess this works on real hardware because the 378 BootROM happens to be in ROM/flash or in memory that isn't clobbered 379 until after Linux boots the secondary CPUs. */ 380 memory_region_init_ram(ram_hack, NULL, "realview.hack", 0x1000, 381 &error_fatal); 382 memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack); 383 384 realview_binfo.ram_size = ram_size; 385 realview_binfo.board_id = realview_board_id[board_type]; 386 realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0); 387 arm_load_kernel(cpu, machine, &realview_binfo); 388 } 389 390 static void realview_eb_init(MachineState *machine) 391 { 392 realview_init(machine, BOARD_EB); 393 } 394 395 static void realview_eb_mpcore_init(MachineState *machine) 396 { 397 realview_init(machine, BOARD_EB_MPCORE); 398 } 399 400 static void realview_pb_a8_init(MachineState *machine) 401 { 402 realview_init(machine, BOARD_PB_A8); 403 } 404 405 static void realview_pbx_a9_init(MachineState *machine) 406 { 407 realview_init(machine, BOARD_PBX_A9); 408 } 409 410 static void realview_eb_class_init(ObjectClass *oc, void *data) 411 { 412 MachineClass *mc = MACHINE_CLASS(oc); 413 414 mc->desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)"; 415 mc->init = realview_eb_init; 416 mc->block_default_type = IF_SCSI; 417 mc->ignore_memory_transaction_failures = true; 418 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm926"); 419 420 machine_add_audiodev_property(mc); 421 } 422 423 static const TypeInfo realview_eb_type = { 424 .name = MACHINE_TYPE_NAME("realview-eb"), 425 .parent = TYPE_MACHINE, 426 .class_init = realview_eb_class_init, 427 }; 428 429 static void realview_eb_mpcore_class_init(ObjectClass *oc, void *data) 430 { 431 MachineClass *mc = MACHINE_CLASS(oc); 432 433 mc->desc = "ARM RealView Emulation Baseboard (ARM11MPCore)"; 434 mc->init = realview_eb_mpcore_init; 435 mc->block_default_type = IF_SCSI; 436 mc->max_cpus = 4; 437 mc->ignore_memory_transaction_failures = true; 438 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm11mpcore"); 439 440 machine_add_audiodev_property(mc); 441 } 442 443 static const TypeInfo realview_eb_mpcore_type = { 444 .name = MACHINE_TYPE_NAME("realview-eb-mpcore"), 445 .parent = TYPE_MACHINE, 446 .class_init = realview_eb_mpcore_class_init, 447 }; 448 449 static void realview_pb_a8_class_init(ObjectClass *oc, void *data) 450 { 451 MachineClass *mc = MACHINE_CLASS(oc); 452 453 mc->desc = "ARM RealView Platform Baseboard for Cortex-A8"; 454 mc->init = realview_pb_a8_init; 455 mc->ignore_memory_transaction_failures = true; 456 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); 457 458 machine_add_audiodev_property(mc); 459 } 460 461 static const TypeInfo realview_pb_a8_type = { 462 .name = MACHINE_TYPE_NAME("realview-pb-a8"), 463 .parent = TYPE_MACHINE, 464 .class_init = realview_pb_a8_class_init, 465 }; 466 467 static void realview_pbx_a9_class_init(ObjectClass *oc, void *data) 468 { 469 MachineClass *mc = MACHINE_CLASS(oc); 470 471 mc->desc = "ARM RealView Platform Baseboard Explore for Cortex-A9"; 472 mc->init = realview_pbx_a9_init; 473 mc->max_cpus = 4; 474 mc->ignore_memory_transaction_failures = true; 475 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); 476 477 machine_add_audiodev_property(mc); 478 } 479 480 static const TypeInfo realview_pbx_a9_type = { 481 .name = MACHINE_TYPE_NAME("realview-pbx-a9"), 482 .parent = TYPE_MACHINE, 483 .class_init = realview_pbx_a9_class_init, 484 }; 485 486 static void realview_machine_init(void) 487 { 488 type_register_static(&realview_eb_type); 489 type_register_static(&realview_eb_mpcore_type); 490 type_register_static(&realview_pb_a8_type); 491 type_register_static(&realview_pbx_a9_type); 492 } 493 494 type_init(realview_machine_init) 495