xref: /openbmc/qemu/hw/arm/pxa2xx_gpio.c (revision 6a0acfff)
1 /*
2  * Intel XScale PXA255/270 GPIO controller emulation.
3  *
4  * Copyright (c) 2006 Openedhand Ltd.
5  * Written by Andrzej Zaborowski <balrog@zabor.org>
6  *
7  * This code is licensed under the GPL.
8  */
9 
10 #include "qemu/osdep.h"
11 #include "cpu.h"
12 #include "hw/hw.h"
13 #include "hw/irq.h"
14 #include "hw/sysbus.h"
15 #include "hw/arm/pxa.h"
16 #include "qemu/log.h"
17 #include "qemu/module.h"
18 
19 #define PXA2XX_GPIO_BANKS	4
20 
21 #define TYPE_PXA2XX_GPIO "pxa2xx-gpio"
22 #define PXA2XX_GPIO(obj) \
23     OBJECT_CHECK(PXA2xxGPIOInfo, (obj), TYPE_PXA2XX_GPIO)
24 
25 typedef struct PXA2xxGPIOInfo PXA2xxGPIOInfo;
26 struct PXA2xxGPIOInfo {
27     /*< private >*/
28     SysBusDevice parent_obj;
29     /*< public >*/
30 
31     MemoryRegion iomem;
32     qemu_irq irq0, irq1, irqX;
33     int lines;
34     int ncpu;
35     ARMCPU *cpu;
36 
37     /* XXX: GNU C vectors are more suitable */
38     uint32_t ilevel[PXA2XX_GPIO_BANKS];
39     uint32_t olevel[PXA2XX_GPIO_BANKS];
40     uint32_t dir[PXA2XX_GPIO_BANKS];
41     uint32_t rising[PXA2XX_GPIO_BANKS];
42     uint32_t falling[PXA2XX_GPIO_BANKS];
43     uint32_t status[PXA2XX_GPIO_BANKS];
44     uint32_t gafr[PXA2XX_GPIO_BANKS * 2];
45 
46     uint32_t prev_level[PXA2XX_GPIO_BANKS];
47     qemu_irq handler[PXA2XX_GPIO_BANKS * 32];
48     qemu_irq read_notify;
49 };
50 
51 static struct {
52     enum {
53         GPIO_NONE,
54         GPLR,
55         GPSR,
56         GPCR,
57         GPDR,
58         GRER,
59         GFER,
60         GEDR,
61         GAFR_L,
62         GAFR_U,
63     } reg;
64     int bank;
65 } pxa2xx_gpio_regs[0x200] = {
66     [0 ... 0x1ff] = { GPIO_NONE, 0 },
67 #define PXA2XX_REG(reg, a0, a1, a2, a3)	\
68     [a0] = { reg, 0 }, [a1] = { reg, 1 }, [a2] = { reg, 2 }, [a3] = { reg, 3 },
69 
70     PXA2XX_REG(GPLR, 0x000, 0x004, 0x008, 0x100)
71     PXA2XX_REG(GPSR, 0x018, 0x01c, 0x020, 0x118)
72     PXA2XX_REG(GPCR, 0x024, 0x028, 0x02c, 0x124)
73     PXA2XX_REG(GPDR, 0x00c, 0x010, 0x014, 0x10c)
74     PXA2XX_REG(GRER, 0x030, 0x034, 0x038, 0x130)
75     PXA2XX_REG(GFER, 0x03c, 0x040, 0x044, 0x13c)
76     PXA2XX_REG(GEDR, 0x048, 0x04c, 0x050, 0x148)
77     PXA2XX_REG(GAFR_L, 0x054, 0x05c, 0x064, 0x06c)
78     PXA2XX_REG(GAFR_U, 0x058, 0x060, 0x068, 0x070)
79 };
80 
81 static void pxa2xx_gpio_irq_update(PXA2xxGPIOInfo *s)
82 {
83     if (s->status[0] & (1 << 0))
84         qemu_irq_raise(s->irq0);
85     else
86         qemu_irq_lower(s->irq0);
87 
88     if (s->status[0] & (1 << 1))
89         qemu_irq_raise(s->irq1);
90     else
91         qemu_irq_lower(s->irq1);
92 
93     if ((s->status[0] & ~3) | s->status[1] | s->status[2] | s->status[3])
94         qemu_irq_raise(s->irqX);
95     else
96         qemu_irq_lower(s->irqX);
97 }
98 
99 /* Bitmap of pins used as standby and sleep wake-up sources.  */
100 static const int pxa2xx_gpio_wake[PXA2XX_GPIO_BANKS] = {
101     0x8003fe1b, 0x002001fc, 0xec080000, 0x0012007f,
102 };
103 
104 static void pxa2xx_gpio_set(void *opaque, int line, int level)
105 {
106     PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
107     CPUState *cpu = CPU(s->cpu);
108     int bank;
109     uint32_t mask;
110 
111     if (line >= s->lines) {
112         printf("%s: No GPIO pin %i\n", __func__, line);
113         return;
114     }
115 
116     bank = line >> 5;
117     mask = 1U << (line & 31);
118 
119     if (level) {
120         s->status[bank] |= s->rising[bank] & mask &
121                 ~s->ilevel[bank] & ~s->dir[bank];
122         s->ilevel[bank] |= mask;
123     } else {
124         s->status[bank] |= s->falling[bank] & mask &
125                 s->ilevel[bank] & ~s->dir[bank];
126         s->ilevel[bank] &= ~mask;
127     }
128 
129     if (s->status[bank] & mask)
130         pxa2xx_gpio_irq_update(s);
131 
132     /* Wake-up GPIOs */
133     if (cpu->halted && (mask & ~s->dir[bank] & pxa2xx_gpio_wake[bank])) {
134         cpu_interrupt(cpu, CPU_INTERRUPT_EXITTB);
135     }
136 }
137 
138 static void pxa2xx_gpio_handler_update(PXA2xxGPIOInfo *s) {
139     uint32_t level, diff;
140     int i, bit, line;
141     for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
142         level = s->olevel[i] & s->dir[i];
143 
144         for (diff = s->prev_level[i] ^ level; diff; diff ^= 1 << bit) {
145             bit = ctz32(diff);
146             line = bit + 32 * i;
147             qemu_set_irq(s->handler[line], (level >> bit) & 1);
148         }
149 
150         s->prev_level[i] = level;
151     }
152 }
153 
154 static uint64_t pxa2xx_gpio_read(void *opaque, hwaddr offset,
155                                  unsigned size)
156 {
157     PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
158     uint32_t ret;
159     int bank;
160     if (offset >= 0x200)
161         return 0;
162 
163     bank = pxa2xx_gpio_regs[offset].bank;
164     switch (pxa2xx_gpio_regs[offset].reg) {
165     case GPDR:		/* GPIO Pin-Direction registers */
166         return s->dir[bank];
167 
168     case GPSR:		/* GPIO Pin-Output Set registers */
169         qemu_log_mask(LOG_GUEST_ERROR,
170                       "pxa2xx GPIO: read from write only register GPSR\n");
171         return 0;
172 
173     case GPCR:		/* GPIO Pin-Output Clear registers */
174         qemu_log_mask(LOG_GUEST_ERROR,
175                       "pxa2xx GPIO: read from write only register GPCR\n");
176         return 0;
177 
178     case GRER:		/* GPIO Rising-Edge Detect Enable registers */
179         return s->rising[bank];
180 
181     case GFER:		/* GPIO Falling-Edge Detect Enable registers */
182         return s->falling[bank];
183 
184     case GAFR_L:	/* GPIO Alternate Function registers */
185         return s->gafr[bank * 2];
186 
187     case GAFR_U:	/* GPIO Alternate Function registers */
188         return s->gafr[bank * 2 + 1];
189 
190     case GPLR:		/* GPIO Pin-Level registers */
191         ret = (s->olevel[bank] & s->dir[bank]) |
192                 (s->ilevel[bank] & ~s->dir[bank]);
193         qemu_irq_raise(s->read_notify);
194         return ret;
195 
196     case GEDR:		/* GPIO Edge Detect Status registers */
197         return s->status[bank];
198 
199     default:
200         hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset);
201     }
202 
203     return 0;
204 }
205 
206 static void pxa2xx_gpio_write(void *opaque, hwaddr offset,
207                               uint64_t value, unsigned size)
208 {
209     PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
210     int bank;
211     if (offset >= 0x200)
212         return;
213 
214     bank = pxa2xx_gpio_regs[offset].bank;
215     switch (pxa2xx_gpio_regs[offset].reg) {
216     case GPDR:		/* GPIO Pin-Direction registers */
217         s->dir[bank] = value;
218         pxa2xx_gpio_handler_update(s);
219         break;
220 
221     case GPSR:		/* GPIO Pin-Output Set registers */
222         s->olevel[bank] |= value;
223         pxa2xx_gpio_handler_update(s);
224         break;
225 
226     case GPCR:		/* GPIO Pin-Output Clear registers */
227         s->olevel[bank] &= ~value;
228         pxa2xx_gpio_handler_update(s);
229         break;
230 
231     case GRER:		/* GPIO Rising-Edge Detect Enable registers */
232         s->rising[bank] = value;
233         break;
234 
235     case GFER:		/* GPIO Falling-Edge Detect Enable registers */
236         s->falling[bank] = value;
237         break;
238 
239     case GAFR_L:	/* GPIO Alternate Function registers */
240         s->gafr[bank * 2] = value;
241         break;
242 
243     case GAFR_U:	/* GPIO Alternate Function registers */
244         s->gafr[bank * 2 + 1] = value;
245         break;
246 
247     case GEDR:		/* GPIO Edge Detect Status registers */
248         s->status[bank] &= ~value;
249         pxa2xx_gpio_irq_update(s);
250         break;
251 
252     default:
253         hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset);
254     }
255 }
256 
257 static const MemoryRegionOps pxa_gpio_ops = {
258     .read = pxa2xx_gpio_read,
259     .write = pxa2xx_gpio_write,
260     .endianness = DEVICE_NATIVE_ENDIAN,
261 };
262 
263 DeviceState *pxa2xx_gpio_init(hwaddr base,
264                               ARMCPU *cpu, DeviceState *pic, int lines)
265 {
266     CPUState *cs = CPU(cpu);
267     DeviceState *dev;
268 
269     dev = qdev_create(NULL, TYPE_PXA2XX_GPIO);
270     qdev_prop_set_int32(dev, "lines", lines);
271     qdev_prop_set_int32(dev, "ncpu", cs->cpu_index);
272     qdev_init_nofail(dev);
273 
274     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
275     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
276                     qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_0));
277     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1,
278                     qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_1));
279     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2,
280                     qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_X));
281 
282     return dev;
283 }
284 
285 static void pxa2xx_gpio_initfn(Object *obj)
286 {
287     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
288     DeviceState *dev = DEVICE(sbd);
289     PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
290 
291     memory_region_init_io(&s->iomem, obj, &pxa_gpio_ops,
292                           s, "pxa2xx-gpio", 0x1000);
293     sysbus_init_mmio(sbd, &s->iomem);
294     sysbus_init_irq(sbd, &s->irq0);
295     sysbus_init_irq(sbd, &s->irq1);
296     sysbus_init_irq(sbd, &s->irqX);
297 }
298 
299 static void pxa2xx_gpio_realize(DeviceState *dev, Error **errp)
300 {
301     PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
302 
303     s->cpu = ARM_CPU(qemu_get_cpu(s->ncpu));
304 
305     qdev_init_gpio_in(dev, pxa2xx_gpio_set, s->lines);
306     qdev_init_gpio_out(dev, s->handler, s->lines);
307 }
308 
309 /*
310  * Registers a callback to notify on GPLR reads.  This normally
311  * shouldn't be needed but it is used for the hack on Spitz machines.
312  */
313 void pxa2xx_gpio_read_notifier(DeviceState *dev, qemu_irq handler)
314 {
315     PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
316 
317     s->read_notify = handler;
318 }
319 
320 static const VMStateDescription vmstate_pxa2xx_gpio_regs = {
321     .name = "pxa2xx-gpio",
322     .version_id = 1,
323     .minimum_version_id = 1,
324     .fields = (VMStateField[]) {
325         VMSTATE_UINT32_ARRAY(ilevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
326         VMSTATE_UINT32_ARRAY(olevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
327         VMSTATE_UINT32_ARRAY(dir, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
328         VMSTATE_UINT32_ARRAY(rising, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
329         VMSTATE_UINT32_ARRAY(falling, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
330         VMSTATE_UINT32_ARRAY(status, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
331         VMSTATE_UINT32_ARRAY(gafr, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS * 2),
332         VMSTATE_UINT32_ARRAY(prev_level, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
333         VMSTATE_END_OF_LIST(),
334     },
335 };
336 
337 static Property pxa2xx_gpio_properties[] = {
338     DEFINE_PROP_INT32("lines", PXA2xxGPIOInfo, lines, 0),
339     DEFINE_PROP_INT32("ncpu", PXA2xxGPIOInfo, ncpu, 0),
340     DEFINE_PROP_END_OF_LIST(),
341 };
342 
343 static void pxa2xx_gpio_class_init(ObjectClass *klass, void *data)
344 {
345     DeviceClass *dc = DEVICE_CLASS(klass);
346 
347     dc->desc = "PXA2xx GPIO controller";
348     dc->props = pxa2xx_gpio_properties;
349     dc->vmsd = &vmstate_pxa2xx_gpio_regs;
350     dc->realize = pxa2xx_gpio_realize;
351 }
352 
353 static const TypeInfo pxa2xx_gpio_info = {
354     .name          = TYPE_PXA2XX_GPIO,
355     .parent        = TYPE_SYS_BUS_DEVICE,
356     .instance_size = sizeof(PXA2xxGPIOInfo),
357     .instance_init = pxa2xx_gpio_initfn,
358     .class_init    = pxa2xx_gpio_class_init,
359 };
360 
361 static void pxa2xx_gpio_register_types(void)
362 {
363     type_register_static(&pxa2xx_gpio_info);
364 }
365 
366 type_init(pxa2xx_gpio_register_types)
367