1 /* 2 * Intel XScale PXA255/270 GPIO controller emulation. 3 * 4 * Copyright (c) 2006 Openedhand Ltd. 5 * Written by Andrzej Zaborowski <balrog@zabor.org> 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "cpu.h" 12 #include "hw/irq.h" 13 #include "hw/qdev-properties.h" 14 #include "hw/sysbus.h" 15 #include "migration/vmstate.h" 16 #include "hw/arm/pxa.h" 17 #include "qapi/error.h" 18 #include "qemu/log.h" 19 #include "qemu/module.h" 20 #include "qom/object.h" 21 22 #define PXA2XX_GPIO_BANKS 4 23 24 #define TYPE_PXA2XX_GPIO "pxa2xx-gpio" 25 OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxGPIOInfo, PXA2XX_GPIO) 26 27 struct PXA2xxGPIOInfo { 28 /*< private >*/ 29 SysBusDevice parent_obj; 30 /*< public >*/ 31 32 MemoryRegion iomem; 33 qemu_irq irq0, irq1, irqX; 34 int lines; 35 ARMCPU *cpu; 36 37 /* XXX: GNU C vectors are more suitable */ 38 uint32_t ilevel[PXA2XX_GPIO_BANKS]; 39 uint32_t olevel[PXA2XX_GPIO_BANKS]; 40 uint32_t dir[PXA2XX_GPIO_BANKS]; 41 uint32_t rising[PXA2XX_GPIO_BANKS]; 42 uint32_t falling[PXA2XX_GPIO_BANKS]; 43 uint32_t status[PXA2XX_GPIO_BANKS]; 44 uint32_t gafr[PXA2XX_GPIO_BANKS * 2]; 45 46 uint32_t prev_level[PXA2XX_GPIO_BANKS]; 47 qemu_irq handler[PXA2XX_GPIO_BANKS * 32]; 48 qemu_irq read_notify; 49 }; 50 51 static struct { 52 enum { 53 GPIO_NONE, 54 GPLR, 55 GPSR, 56 GPCR, 57 GPDR, 58 GRER, 59 GFER, 60 GEDR, 61 GAFR_L, 62 GAFR_U, 63 } reg; 64 int bank; 65 } pxa2xx_gpio_regs[0x200] = { 66 [0 ... 0x1ff] = { GPIO_NONE, 0 }, 67 #define PXA2XX_REG(reg, a0, a1, a2, a3) \ 68 [a0] = { reg, 0 }, [a1] = { reg, 1 }, [a2] = { reg, 2 }, [a3] = { reg, 3 }, 69 70 PXA2XX_REG(GPLR, 0x000, 0x004, 0x008, 0x100) 71 PXA2XX_REG(GPSR, 0x018, 0x01c, 0x020, 0x118) 72 PXA2XX_REG(GPCR, 0x024, 0x028, 0x02c, 0x124) 73 PXA2XX_REG(GPDR, 0x00c, 0x010, 0x014, 0x10c) 74 PXA2XX_REG(GRER, 0x030, 0x034, 0x038, 0x130) 75 PXA2XX_REG(GFER, 0x03c, 0x040, 0x044, 0x13c) 76 PXA2XX_REG(GEDR, 0x048, 0x04c, 0x050, 0x148) 77 PXA2XX_REG(GAFR_L, 0x054, 0x05c, 0x064, 0x06c) 78 PXA2XX_REG(GAFR_U, 0x058, 0x060, 0x068, 0x070) 79 }; 80 81 static void pxa2xx_gpio_irq_update(PXA2xxGPIOInfo *s) 82 { 83 if (s->status[0] & (1 << 0)) 84 qemu_irq_raise(s->irq0); 85 else 86 qemu_irq_lower(s->irq0); 87 88 if (s->status[0] & (1 << 1)) 89 qemu_irq_raise(s->irq1); 90 else 91 qemu_irq_lower(s->irq1); 92 93 if ((s->status[0] & ~3) | s->status[1] | s->status[2] | s->status[3]) 94 qemu_irq_raise(s->irqX); 95 else 96 qemu_irq_lower(s->irqX); 97 } 98 99 /* Bitmap of pins used as standby and sleep wake-up sources. */ 100 static const int pxa2xx_gpio_wake[PXA2XX_GPIO_BANKS] = { 101 0x8003fe1b, 0x002001fc, 0xec080000, 0x0012007f, 102 }; 103 104 static void pxa2xx_gpio_set(void *opaque, int line, int level) 105 { 106 PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque; 107 CPUState *cpu = CPU(s->cpu); 108 int bank; 109 uint32_t mask; 110 111 if (line >= s->lines) { 112 printf("%s: No GPIO pin %i\n", __func__, line); 113 return; 114 } 115 116 bank = line >> 5; 117 mask = 1U << (line & 31); 118 119 if (level) { 120 s->status[bank] |= s->rising[bank] & mask & 121 ~s->ilevel[bank] & ~s->dir[bank]; 122 s->ilevel[bank] |= mask; 123 } else { 124 s->status[bank] |= s->falling[bank] & mask & 125 s->ilevel[bank] & ~s->dir[bank]; 126 s->ilevel[bank] &= ~mask; 127 } 128 129 if (s->status[bank] & mask) 130 pxa2xx_gpio_irq_update(s); 131 132 /* Wake-up GPIOs */ 133 if (cpu->halted && (mask & ~s->dir[bank] & pxa2xx_gpio_wake[bank])) { 134 cpu_interrupt(cpu, CPU_INTERRUPT_EXITTB); 135 } 136 } 137 138 static void pxa2xx_gpio_handler_update(PXA2xxGPIOInfo *s) { 139 uint32_t level, diff; 140 int i, bit, line; 141 for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) { 142 level = s->olevel[i] & s->dir[i]; 143 144 for (diff = s->prev_level[i] ^ level; diff; diff ^= 1 << bit) { 145 bit = ctz32(diff); 146 line = bit + 32 * i; 147 qemu_set_irq(s->handler[line], (level >> bit) & 1); 148 } 149 150 s->prev_level[i] = level; 151 } 152 } 153 154 static uint64_t pxa2xx_gpio_read(void *opaque, hwaddr offset, 155 unsigned size) 156 { 157 PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque; 158 uint32_t ret; 159 int bank; 160 if (offset >= 0x200) 161 return 0; 162 163 bank = pxa2xx_gpio_regs[offset].bank; 164 switch (pxa2xx_gpio_regs[offset].reg) { 165 case GPDR: /* GPIO Pin-Direction registers */ 166 return s->dir[bank]; 167 168 case GPSR: /* GPIO Pin-Output Set registers */ 169 qemu_log_mask(LOG_GUEST_ERROR, 170 "pxa2xx GPIO: read from write only register GPSR\n"); 171 return 0; 172 173 case GPCR: /* GPIO Pin-Output Clear registers */ 174 qemu_log_mask(LOG_GUEST_ERROR, 175 "pxa2xx GPIO: read from write only register GPCR\n"); 176 return 0; 177 178 case GRER: /* GPIO Rising-Edge Detect Enable registers */ 179 return s->rising[bank]; 180 181 case GFER: /* GPIO Falling-Edge Detect Enable registers */ 182 return s->falling[bank]; 183 184 case GAFR_L: /* GPIO Alternate Function registers */ 185 return s->gafr[bank * 2]; 186 187 case GAFR_U: /* GPIO Alternate Function registers */ 188 return s->gafr[bank * 2 + 1]; 189 190 case GPLR: /* GPIO Pin-Level registers */ 191 ret = (s->olevel[bank] & s->dir[bank]) | 192 (s->ilevel[bank] & ~s->dir[bank]); 193 qemu_irq_raise(s->read_notify); 194 return ret; 195 196 case GEDR: /* GPIO Edge Detect Status registers */ 197 return s->status[bank]; 198 199 default: 200 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", 201 __func__, offset); 202 } 203 204 return 0; 205 } 206 207 static void pxa2xx_gpio_write(void *opaque, hwaddr offset, 208 uint64_t value, unsigned size) 209 { 210 PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque; 211 int bank; 212 if (offset >= 0x200) 213 return; 214 215 bank = pxa2xx_gpio_regs[offset].bank; 216 switch (pxa2xx_gpio_regs[offset].reg) { 217 case GPDR: /* GPIO Pin-Direction registers */ 218 s->dir[bank] = value; 219 pxa2xx_gpio_handler_update(s); 220 break; 221 222 case GPSR: /* GPIO Pin-Output Set registers */ 223 s->olevel[bank] |= value; 224 pxa2xx_gpio_handler_update(s); 225 break; 226 227 case GPCR: /* GPIO Pin-Output Clear registers */ 228 s->olevel[bank] &= ~value; 229 pxa2xx_gpio_handler_update(s); 230 break; 231 232 case GRER: /* GPIO Rising-Edge Detect Enable registers */ 233 s->rising[bank] = value; 234 break; 235 236 case GFER: /* GPIO Falling-Edge Detect Enable registers */ 237 s->falling[bank] = value; 238 break; 239 240 case GAFR_L: /* GPIO Alternate Function registers */ 241 s->gafr[bank * 2] = value; 242 break; 243 244 case GAFR_U: /* GPIO Alternate Function registers */ 245 s->gafr[bank * 2 + 1] = value; 246 break; 247 248 case GEDR: /* GPIO Edge Detect Status registers */ 249 s->status[bank] &= ~value; 250 pxa2xx_gpio_irq_update(s); 251 break; 252 253 default: 254 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", 255 __func__, offset); 256 } 257 } 258 259 static const MemoryRegionOps pxa_gpio_ops = { 260 .read = pxa2xx_gpio_read, 261 .write = pxa2xx_gpio_write, 262 .endianness = DEVICE_NATIVE_ENDIAN, 263 }; 264 265 DeviceState *pxa2xx_gpio_init(hwaddr base, 266 ARMCPU *cpu, DeviceState *pic, int lines) 267 { 268 DeviceState *dev; 269 270 dev = qdev_new(TYPE_PXA2XX_GPIO); 271 qdev_prop_set_int32(dev, "lines", lines); 272 object_property_set_link(OBJECT(dev), "cpu", OBJECT(cpu), &error_abort); 273 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 274 275 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 276 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, 277 qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_0)); 278 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, 279 qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_1)); 280 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, 281 qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_X)); 282 283 return dev; 284 } 285 286 static void pxa2xx_gpio_initfn(Object *obj) 287 { 288 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 289 DeviceState *dev = DEVICE(sbd); 290 PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev); 291 292 memory_region_init_io(&s->iomem, obj, &pxa_gpio_ops, 293 s, "pxa2xx-gpio", 0x1000); 294 sysbus_init_mmio(sbd, &s->iomem); 295 sysbus_init_irq(sbd, &s->irq0); 296 sysbus_init_irq(sbd, &s->irq1); 297 sysbus_init_irq(sbd, &s->irqX); 298 } 299 300 static void pxa2xx_gpio_realize(DeviceState *dev, Error **errp) 301 { 302 PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev); 303 304 qdev_init_gpio_in(dev, pxa2xx_gpio_set, s->lines); 305 qdev_init_gpio_out(dev, s->handler, s->lines); 306 } 307 308 /* 309 * Registers a callback to notify on GPLR reads. This normally 310 * shouldn't be needed but it is used for the hack on Spitz machines. 311 */ 312 void pxa2xx_gpio_read_notifier(DeviceState *dev, qemu_irq handler) 313 { 314 PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev); 315 316 s->read_notify = handler; 317 } 318 319 static const VMStateDescription vmstate_pxa2xx_gpio_regs = { 320 .name = "pxa2xx-gpio", 321 .version_id = 1, 322 .minimum_version_id = 1, 323 .fields = (VMStateField[]) { 324 VMSTATE_UINT32_ARRAY(ilevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS), 325 VMSTATE_UINT32_ARRAY(olevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS), 326 VMSTATE_UINT32_ARRAY(dir, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS), 327 VMSTATE_UINT32_ARRAY(rising, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS), 328 VMSTATE_UINT32_ARRAY(falling, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS), 329 VMSTATE_UINT32_ARRAY(status, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS), 330 VMSTATE_UINT32_ARRAY(gafr, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS * 2), 331 VMSTATE_UINT32_ARRAY(prev_level, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS), 332 VMSTATE_END_OF_LIST(), 333 }, 334 }; 335 336 static Property pxa2xx_gpio_properties[] = { 337 DEFINE_PROP_INT32("lines", PXA2xxGPIOInfo, lines, 0), 338 DEFINE_PROP_LINK("cpu", PXA2xxGPIOInfo, cpu, TYPE_ARM_CPU, ARMCPU *), 339 DEFINE_PROP_END_OF_LIST(), 340 }; 341 342 static void pxa2xx_gpio_class_init(ObjectClass *klass, void *data) 343 { 344 DeviceClass *dc = DEVICE_CLASS(klass); 345 346 dc->desc = "PXA2xx GPIO controller"; 347 device_class_set_props(dc, pxa2xx_gpio_properties); 348 dc->vmsd = &vmstate_pxa2xx_gpio_regs; 349 dc->realize = pxa2xx_gpio_realize; 350 } 351 352 static const TypeInfo pxa2xx_gpio_info = { 353 .name = TYPE_PXA2XX_GPIO, 354 .parent = TYPE_SYS_BUS_DEVICE, 355 .instance_size = sizeof(PXA2xxGPIOInfo), 356 .instance_init = pxa2xx_gpio_initfn, 357 .class_init = pxa2xx_gpio_class_init, 358 }; 359 360 static void pxa2xx_gpio_register_types(void) 361 { 362 type_register_static(&pxa2xx_gpio_info); 363 } 364 365 type_init(pxa2xx_gpio_register_types) 366