xref: /openbmc/qemu/hw/arm/pxa2xx_gpio.c (revision 0b8fa32f)
1 /*
2  * Intel XScale PXA255/270 GPIO controller emulation.
3  *
4  * Copyright (c) 2006 Openedhand Ltd.
5  * Written by Andrzej Zaborowski <balrog@zabor.org>
6  *
7  * This code is licensed under the GPL.
8  */
9 
10 #include "qemu/osdep.h"
11 #include "cpu.h"
12 #include "hw/hw.h"
13 #include "hw/sysbus.h"
14 #include "hw/arm/pxa.h"
15 #include "qemu/log.h"
16 #include "qemu/module.h"
17 
18 #define PXA2XX_GPIO_BANKS	4
19 
20 #define TYPE_PXA2XX_GPIO "pxa2xx-gpio"
21 #define PXA2XX_GPIO(obj) \
22     OBJECT_CHECK(PXA2xxGPIOInfo, (obj), TYPE_PXA2XX_GPIO)
23 
24 typedef struct PXA2xxGPIOInfo PXA2xxGPIOInfo;
25 struct PXA2xxGPIOInfo {
26     /*< private >*/
27     SysBusDevice parent_obj;
28     /*< public >*/
29 
30     MemoryRegion iomem;
31     qemu_irq irq0, irq1, irqX;
32     int lines;
33     int ncpu;
34     ARMCPU *cpu;
35 
36     /* XXX: GNU C vectors are more suitable */
37     uint32_t ilevel[PXA2XX_GPIO_BANKS];
38     uint32_t olevel[PXA2XX_GPIO_BANKS];
39     uint32_t dir[PXA2XX_GPIO_BANKS];
40     uint32_t rising[PXA2XX_GPIO_BANKS];
41     uint32_t falling[PXA2XX_GPIO_BANKS];
42     uint32_t status[PXA2XX_GPIO_BANKS];
43     uint32_t gafr[PXA2XX_GPIO_BANKS * 2];
44 
45     uint32_t prev_level[PXA2XX_GPIO_BANKS];
46     qemu_irq handler[PXA2XX_GPIO_BANKS * 32];
47     qemu_irq read_notify;
48 };
49 
50 static struct {
51     enum {
52         GPIO_NONE,
53         GPLR,
54         GPSR,
55         GPCR,
56         GPDR,
57         GRER,
58         GFER,
59         GEDR,
60         GAFR_L,
61         GAFR_U,
62     } reg;
63     int bank;
64 } pxa2xx_gpio_regs[0x200] = {
65     [0 ... 0x1ff] = { GPIO_NONE, 0 },
66 #define PXA2XX_REG(reg, a0, a1, a2, a3)	\
67     [a0] = { reg, 0 }, [a1] = { reg, 1 }, [a2] = { reg, 2 }, [a3] = { reg, 3 },
68 
69     PXA2XX_REG(GPLR, 0x000, 0x004, 0x008, 0x100)
70     PXA2XX_REG(GPSR, 0x018, 0x01c, 0x020, 0x118)
71     PXA2XX_REG(GPCR, 0x024, 0x028, 0x02c, 0x124)
72     PXA2XX_REG(GPDR, 0x00c, 0x010, 0x014, 0x10c)
73     PXA2XX_REG(GRER, 0x030, 0x034, 0x038, 0x130)
74     PXA2XX_REG(GFER, 0x03c, 0x040, 0x044, 0x13c)
75     PXA2XX_REG(GEDR, 0x048, 0x04c, 0x050, 0x148)
76     PXA2XX_REG(GAFR_L, 0x054, 0x05c, 0x064, 0x06c)
77     PXA2XX_REG(GAFR_U, 0x058, 0x060, 0x068, 0x070)
78 };
79 
80 static void pxa2xx_gpio_irq_update(PXA2xxGPIOInfo *s)
81 {
82     if (s->status[0] & (1 << 0))
83         qemu_irq_raise(s->irq0);
84     else
85         qemu_irq_lower(s->irq0);
86 
87     if (s->status[0] & (1 << 1))
88         qemu_irq_raise(s->irq1);
89     else
90         qemu_irq_lower(s->irq1);
91 
92     if ((s->status[0] & ~3) | s->status[1] | s->status[2] | s->status[3])
93         qemu_irq_raise(s->irqX);
94     else
95         qemu_irq_lower(s->irqX);
96 }
97 
98 /* Bitmap of pins used as standby and sleep wake-up sources.  */
99 static const int pxa2xx_gpio_wake[PXA2XX_GPIO_BANKS] = {
100     0x8003fe1b, 0x002001fc, 0xec080000, 0x0012007f,
101 };
102 
103 static void pxa2xx_gpio_set(void *opaque, int line, int level)
104 {
105     PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
106     CPUState *cpu = CPU(s->cpu);
107     int bank;
108     uint32_t mask;
109 
110     if (line >= s->lines) {
111         printf("%s: No GPIO pin %i\n", __func__, line);
112         return;
113     }
114 
115     bank = line >> 5;
116     mask = 1U << (line & 31);
117 
118     if (level) {
119         s->status[bank] |= s->rising[bank] & mask &
120                 ~s->ilevel[bank] & ~s->dir[bank];
121         s->ilevel[bank] |= mask;
122     } else {
123         s->status[bank] |= s->falling[bank] & mask &
124                 s->ilevel[bank] & ~s->dir[bank];
125         s->ilevel[bank] &= ~mask;
126     }
127 
128     if (s->status[bank] & mask)
129         pxa2xx_gpio_irq_update(s);
130 
131     /* Wake-up GPIOs */
132     if (cpu->halted && (mask & ~s->dir[bank] & pxa2xx_gpio_wake[bank])) {
133         cpu_interrupt(cpu, CPU_INTERRUPT_EXITTB);
134     }
135 }
136 
137 static void pxa2xx_gpio_handler_update(PXA2xxGPIOInfo *s) {
138     uint32_t level, diff;
139     int i, bit, line;
140     for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
141         level = s->olevel[i] & s->dir[i];
142 
143         for (diff = s->prev_level[i] ^ level; diff; diff ^= 1 << bit) {
144             bit = ctz32(diff);
145             line = bit + 32 * i;
146             qemu_set_irq(s->handler[line], (level >> bit) & 1);
147         }
148 
149         s->prev_level[i] = level;
150     }
151 }
152 
153 static uint64_t pxa2xx_gpio_read(void *opaque, hwaddr offset,
154                                  unsigned size)
155 {
156     PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
157     uint32_t ret;
158     int bank;
159     if (offset >= 0x200)
160         return 0;
161 
162     bank = pxa2xx_gpio_regs[offset].bank;
163     switch (pxa2xx_gpio_regs[offset].reg) {
164     case GPDR:		/* GPIO Pin-Direction registers */
165         return s->dir[bank];
166 
167     case GPSR:		/* GPIO Pin-Output Set registers */
168         qemu_log_mask(LOG_GUEST_ERROR,
169                       "pxa2xx GPIO: read from write only register GPSR\n");
170         return 0;
171 
172     case GPCR:		/* GPIO Pin-Output Clear registers */
173         qemu_log_mask(LOG_GUEST_ERROR,
174                       "pxa2xx GPIO: read from write only register GPCR\n");
175         return 0;
176 
177     case GRER:		/* GPIO Rising-Edge Detect Enable registers */
178         return s->rising[bank];
179 
180     case GFER:		/* GPIO Falling-Edge Detect Enable registers */
181         return s->falling[bank];
182 
183     case GAFR_L:	/* GPIO Alternate Function registers */
184         return s->gafr[bank * 2];
185 
186     case GAFR_U:	/* GPIO Alternate Function registers */
187         return s->gafr[bank * 2 + 1];
188 
189     case GPLR:		/* GPIO Pin-Level registers */
190         ret = (s->olevel[bank] & s->dir[bank]) |
191                 (s->ilevel[bank] & ~s->dir[bank]);
192         qemu_irq_raise(s->read_notify);
193         return ret;
194 
195     case GEDR:		/* GPIO Edge Detect Status registers */
196         return s->status[bank];
197 
198     default:
199         hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset);
200     }
201 
202     return 0;
203 }
204 
205 static void pxa2xx_gpio_write(void *opaque, hwaddr offset,
206                               uint64_t value, unsigned size)
207 {
208     PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
209     int bank;
210     if (offset >= 0x200)
211         return;
212 
213     bank = pxa2xx_gpio_regs[offset].bank;
214     switch (pxa2xx_gpio_regs[offset].reg) {
215     case GPDR:		/* GPIO Pin-Direction registers */
216         s->dir[bank] = value;
217         pxa2xx_gpio_handler_update(s);
218         break;
219 
220     case GPSR:		/* GPIO Pin-Output Set registers */
221         s->olevel[bank] |= value;
222         pxa2xx_gpio_handler_update(s);
223         break;
224 
225     case GPCR:		/* GPIO Pin-Output Clear registers */
226         s->olevel[bank] &= ~value;
227         pxa2xx_gpio_handler_update(s);
228         break;
229 
230     case GRER:		/* GPIO Rising-Edge Detect Enable registers */
231         s->rising[bank] = value;
232         break;
233 
234     case GFER:		/* GPIO Falling-Edge Detect Enable registers */
235         s->falling[bank] = value;
236         break;
237 
238     case GAFR_L:	/* GPIO Alternate Function registers */
239         s->gafr[bank * 2] = value;
240         break;
241 
242     case GAFR_U:	/* GPIO Alternate Function registers */
243         s->gafr[bank * 2 + 1] = value;
244         break;
245 
246     case GEDR:		/* GPIO Edge Detect Status registers */
247         s->status[bank] &= ~value;
248         pxa2xx_gpio_irq_update(s);
249         break;
250 
251     default:
252         hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset);
253     }
254 }
255 
256 static const MemoryRegionOps pxa_gpio_ops = {
257     .read = pxa2xx_gpio_read,
258     .write = pxa2xx_gpio_write,
259     .endianness = DEVICE_NATIVE_ENDIAN,
260 };
261 
262 DeviceState *pxa2xx_gpio_init(hwaddr base,
263                               ARMCPU *cpu, DeviceState *pic, int lines)
264 {
265     CPUState *cs = CPU(cpu);
266     DeviceState *dev;
267 
268     dev = qdev_create(NULL, TYPE_PXA2XX_GPIO);
269     qdev_prop_set_int32(dev, "lines", lines);
270     qdev_prop_set_int32(dev, "ncpu", cs->cpu_index);
271     qdev_init_nofail(dev);
272 
273     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
274     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
275                     qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_0));
276     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1,
277                     qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_1));
278     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2,
279                     qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_X));
280 
281     return dev;
282 }
283 
284 static void pxa2xx_gpio_initfn(Object *obj)
285 {
286     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
287     DeviceState *dev = DEVICE(sbd);
288     PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
289 
290     memory_region_init_io(&s->iomem, obj, &pxa_gpio_ops,
291                           s, "pxa2xx-gpio", 0x1000);
292     sysbus_init_mmio(sbd, &s->iomem);
293     sysbus_init_irq(sbd, &s->irq0);
294     sysbus_init_irq(sbd, &s->irq1);
295     sysbus_init_irq(sbd, &s->irqX);
296 }
297 
298 static void pxa2xx_gpio_realize(DeviceState *dev, Error **errp)
299 {
300     PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
301 
302     s->cpu = ARM_CPU(qemu_get_cpu(s->ncpu));
303 
304     qdev_init_gpio_in(dev, pxa2xx_gpio_set, s->lines);
305     qdev_init_gpio_out(dev, s->handler, s->lines);
306 }
307 
308 /*
309  * Registers a callback to notify on GPLR reads.  This normally
310  * shouldn't be needed but it is used for the hack on Spitz machines.
311  */
312 void pxa2xx_gpio_read_notifier(DeviceState *dev, qemu_irq handler)
313 {
314     PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
315 
316     s->read_notify = handler;
317 }
318 
319 static const VMStateDescription vmstate_pxa2xx_gpio_regs = {
320     .name = "pxa2xx-gpio",
321     .version_id = 1,
322     .minimum_version_id = 1,
323     .fields = (VMStateField[]) {
324         VMSTATE_UINT32_ARRAY(ilevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
325         VMSTATE_UINT32_ARRAY(olevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
326         VMSTATE_UINT32_ARRAY(dir, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
327         VMSTATE_UINT32_ARRAY(rising, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
328         VMSTATE_UINT32_ARRAY(falling, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
329         VMSTATE_UINT32_ARRAY(status, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
330         VMSTATE_UINT32_ARRAY(gafr, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS * 2),
331         VMSTATE_UINT32_ARRAY(prev_level, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
332         VMSTATE_END_OF_LIST(),
333     },
334 };
335 
336 static Property pxa2xx_gpio_properties[] = {
337     DEFINE_PROP_INT32("lines", PXA2xxGPIOInfo, lines, 0),
338     DEFINE_PROP_INT32("ncpu", PXA2xxGPIOInfo, ncpu, 0),
339     DEFINE_PROP_END_OF_LIST(),
340 };
341 
342 static void pxa2xx_gpio_class_init(ObjectClass *klass, void *data)
343 {
344     DeviceClass *dc = DEVICE_CLASS(klass);
345 
346     dc->desc = "PXA2xx GPIO controller";
347     dc->props = pxa2xx_gpio_properties;
348     dc->vmsd = &vmstate_pxa2xx_gpio_regs;
349     dc->realize = pxa2xx_gpio_realize;
350 }
351 
352 static const TypeInfo pxa2xx_gpio_info = {
353     .name          = TYPE_PXA2XX_GPIO,
354     .parent        = TYPE_SYS_BUS_DEVICE,
355     .instance_size = sizeof(PXA2xxGPIOInfo),
356     .instance_init = pxa2xx_gpio_initfn,
357     .class_init    = pxa2xx_gpio_class_init,
358 };
359 
360 static void pxa2xx_gpio_register_types(void)
361 {
362     type_register_static(&pxa2xx_gpio_info);
363 }
364 
365 type_init(pxa2xx_gpio_register_types)
366