1 /* 2 * Nokia N-series internet tablets. 3 * 4 * Copyright (C) 2007 Nokia Corporation 5 * Written by Andrzej Zaborowski <andrew@openedhand.com> 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 or 10 * (at your option) version 3 of the License. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "qapi/error.h" 23 #include "cpu.h" 24 #include "chardev/char.h" 25 #include "qemu/cutils.h" 26 #include "qemu/bswap.h" 27 #include "sysemu/reset.h" 28 #include "sysemu/runstate.h" 29 #include "sysemu/sysemu.h" 30 #include "hw/arm/omap.h" 31 #include "hw/arm/boot.h" 32 #include "hw/irq.h" 33 #include "ui/console.h" 34 #include "hw/boards.h" 35 #include "hw/i2c/i2c.h" 36 #include "hw/display/blizzard.h" 37 #include "hw/input/tsc2xxx.h" 38 #include "hw/misc/cbus.h" 39 #include "hw/misc/tmp105.h" 40 #include "hw/qdev-properties.h" 41 #include "hw/block/flash.h" 42 #include "hw/hw.h" 43 #include "hw/loader.h" 44 #include "hw/sysbus.h" 45 #include "qemu/log.h" 46 #include "exec/address-spaces.h" 47 48 /* Nokia N8x0 support */ 49 struct n800_s { 50 MemoryRegion sdram; 51 struct omap_mpu_state_s *mpu; 52 53 struct rfbi_chip_s blizzard; 54 struct { 55 void *opaque; 56 uint32_t (*txrx)(void *opaque, uint32_t value, int len); 57 uWireSlave *chip; 58 } ts; 59 60 int keymap[0x80]; 61 DeviceState *kbd; 62 63 DeviceState *usb; 64 void *retu; 65 void *tahvo; 66 DeviceState *nand; 67 }; 68 69 /* GPIO pins */ 70 #define N8X0_TUSB_ENABLE_GPIO 0 71 #define N800_MMC2_WP_GPIO 8 72 #define N800_UNKNOWN_GPIO0 9 /* out */ 73 #define N810_MMC2_VIOSD_GPIO 9 74 #define N810_HEADSET_AMP_GPIO 10 75 #define N800_CAM_TURN_GPIO 12 76 #define N810_GPS_RESET_GPIO 12 77 #define N800_BLIZZARD_POWERDOWN_GPIO 15 78 #define N800_MMC1_WP_GPIO 23 79 #define N810_MMC2_VSD_GPIO 23 80 #define N8X0_ONENAND_GPIO 26 81 #define N810_BLIZZARD_RESET_GPIO 30 82 #define N800_UNKNOWN_GPIO2 53 /* out */ 83 #define N8X0_TUSB_INT_GPIO 58 84 #define N8X0_BT_WKUP_GPIO 61 85 #define N8X0_STI_GPIO 62 86 #define N8X0_CBUS_SEL_GPIO 64 87 #define N8X0_CBUS_DAT_GPIO 65 88 #define N8X0_CBUS_CLK_GPIO 66 89 #define N8X0_WLAN_IRQ_GPIO 87 90 #define N8X0_BT_RESET_GPIO 92 91 #define N8X0_TEA5761_CS_GPIO 93 92 #define N800_UNKNOWN_GPIO 94 93 #define N810_TSC_RESET_GPIO 94 94 #define N800_CAM_ACT_GPIO 95 95 #define N810_GPS_WAKEUP_GPIO 95 96 #define N8X0_MMC_CS_GPIO 96 97 #define N8X0_WLAN_PWR_GPIO 97 98 #define N8X0_BT_HOST_WKUP_GPIO 98 99 #define N810_SPEAKER_AMP_GPIO 101 100 #define N810_KB_LOCK_GPIO 102 101 #define N800_TSC_TS_GPIO 103 102 #define N810_TSC_TS_GPIO 106 103 #define N8X0_HEADPHONE_GPIO 107 104 #define N8X0_RETU_GPIO 108 105 #define N800_TSC_KP_IRQ_GPIO 109 106 #define N810_KEYBOARD_GPIO 109 107 #define N800_BAT_COVER_GPIO 110 108 #define N810_SLIDE_GPIO 110 109 #define N8X0_TAHVO_GPIO 111 110 #define N800_UNKNOWN_GPIO4 112 /* out */ 111 #define N810_SLEEPX_LED_GPIO 112 112 #define N800_TSC_RESET_GPIO 118 /* ? */ 113 #define N810_AIC33_RESET_GPIO 118 114 #define N800_TSC_UNKNOWN_GPIO 119 /* out */ 115 #define N8X0_TMP105_GPIO 125 116 117 /* Config */ 118 #define BT_UART 0 119 #define XLDR_LL_UART 1 120 121 /* Addresses on the I2C bus 0 */ 122 #define N810_TLV320AIC33_ADDR 0x18 /* Audio CODEC */ 123 #define N8X0_TCM825x_ADDR 0x29 /* Camera */ 124 #define N810_LP5521_ADDR 0x32 /* LEDs */ 125 #define N810_TSL2563_ADDR 0x3d /* Light sensor */ 126 #define N810_LM8323_ADDR 0x45 /* Keyboard */ 127 /* Addresses on the I2C bus 1 */ 128 #define N8X0_TMP105_ADDR 0x48 /* Temperature sensor */ 129 #define N8X0_MENELAUS_ADDR 0x72 /* Power management */ 130 131 /* Chipselects on GPMC NOR interface */ 132 #define N8X0_ONENAND_CS 0 133 #define N8X0_USB_ASYNC_CS 1 134 #define N8X0_USB_SYNC_CS 4 135 136 #define N8X0_BD_ADDR 0x00, 0x1a, 0x89, 0x9e, 0x3e, 0x81 137 138 static void n800_mmc_cs_cb(void *opaque, int line, int level) 139 { 140 /* TODO: this seems to actually be connected to the menelaus, to 141 * which also both MMC slots connect. */ 142 omap_mmc_enable((struct omap_mmc_s *) opaque, !level); 143 } 144 145 static void n8x0_gpio_setup(struct n800_s *s) 146 { 147 qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO, 148 qemu_allocate_irq(n800_mmc_cs_cb, s->mpu->mmc, 0)); 149 qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO)); 150 } 151 152 #define MAEMO_CAL_HEADER(...) \ 153 'C', 'o', 'n', 'F', 0x02, 0x00, 0x04, 0x00, \ 154 __VA_ARGS__, \ 155 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 156 157 static const uint8_t n8x0_cal_wlan_mac[] = { 158 MAEMO_CAL_HEADER('w', 'l', 'a', 'n', '-', 'm', 'a', 'c') 159 0x1c, 0x00, 0x00, 0x00, 0x47, 0xd6, 0x69, 0xb3, 160 0x30, 0x08, 0xa0, 0x83, 0x00, 0x00, 0x00, 0x00, 161 0x00, 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00, 162 0x89, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00, 0x00, 163 0x5d, 0x00, 0x00, 0x00, 0xc1, 0x00, 0x00, 0x00, 164 }; 165 166 static const uint8_t n8x0_cal_bt_id[] = { 167 MAEMO_CAL_HEADER('b', 't', '-', 'i', 'd', 0, 0, 0) 168 0x0a, 0x00, 0x00, 0x00, 0xa3, 0x4b, 0xf6, 0x96, 169 0xa8, 0xeb, 0xb2, 0x41, 0x00, 0x00, 0x00, 0x00, 170 N8X0_BD_ADDR, 171 }; 172 173 static void n8x0_nand_setup(struct n800_s *s) 174 { 175 char *otp_region; 176 DriveInfo *dinfo; 177 178 s->nand = qdev_create(NULL, "onenand"); 179 qdev_prop_set_uint16(s->nand, "manufacturer_id", NAND_MFR_SAMSUNG); 180 /* Either 0x40 or 0x48 are OK for the device ID */ 181 qdev_prop_set_uint16(s->nand, "device_id", 0x48); 182 qdev_prop_set_uint16(s->nand, "version_id", 0); 183 qdev_prop_set_int32(s->nand, "shift", 1); 184 dinfo = drive_get(IF_MTD, 0, 0); 185 if (dinfo) { 186 qdev_prop_set_drive(s->nand, "drive", blk_by_legacy_dinfo(dinfo), 187 &error_fatal); 188 } 189 qdev_init_nofail(s->nand); 190 sysbus_connect_irq(SYS_BUS_DEVICE(s->nand), 0, 191 qdev_get_gpio_in(s->mpu->gpio, N8X0_ONENAND_GPIO)); 192 omap_gpmc_attach(s->mpu->gpmc, N8X0_ONENAND_CS, 193 sysbus_mmio_get_region(SYS_BUS_DEVICE(s->nand), 0)); 194 otp_region = onenand_raw_otp(s->nand); 195 196 memcpy(otp_region + 0x000, n8x0_cal_wlan_mac, sizeof(n8x0_cal_wlan_mac)); 197 memcpy(otp_region + 0x800, n8x0_cal_bt_id, sizeof(n8x0_cal_bt_id)); 198 /* XXX: in theory should also update the OOB for both pages */ 199 } 200 201 static qemu_irq n8x0_system_powerdown; 202 203 static void n8x0_powerdown_req(Notifier *n, void *opaque) 204 { 205 qemu_irq_raise(n8x0_system_powerdown); 206 } 207 208 static Notifier n8x0_system_powerdown_notifier = { 209 .notify = n8x0_powerdown_req 210 }; 211 212 static void n8x0_i2c_setup(struct n800_s *s) 213 { 214 DeviceState *dev; 215 qemu_irq tmp_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TMP105_GPIO); 216 I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]); 217 218 /* Attach a menelaus PM chip */ 219 dev = i2c_create_slave(i2c, "twl92230", N8X0_MENELAUS_ADDR); 220 qdev_connect_gpio_out(dev, 3, 221 qdev_get_gpio_in(s->mpu->ih[0], 222 OMAP_INT_24XX_SYS_NIRQ)); 223 224 n8x0_system_powerdown = qdev_get_gpio_in(dev, 3); 225 qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); 226 227 /* Attach a TMP105 PM chip (A0 wired to ground) */ 228 dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); 229 qdev_connect_gpio_out(dev, 0, tmp_irq); 230 } 231 232 /* Touchscreen and keypad controller */ 233 static MouseTransformInfo n800_pointercal = { 234 .x = 800, 235 .y = 480, 236 .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 }, 237 }; 238 239 static MouseTransformInfo n810_pointercal = { 240 .x = 800, 241 .y = 480, 242 .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 }, 243 }; 244 245 #define RETU_KEYCODE 61 /* F3 */ 246 247 static void n800_key_event(void *opaque, int keycode) 248 { 249 struct n800_s *s = (struct n800_s *) opaque; 250 int code = s->keymap[keycode & 0x7f]; 251 252 if (code == -1) { 253 if ((keycode & 0x7f) == RETU_KEYCODE) { 254 retu_key_event(s->retu, !(keycode & 0x80)); 255 } 256 return; 257 } 258 259 tsc210x_key_event(s->ts.chip, code, !(keycode & 0x80)); 260 } 261 262 static const int n800_keys[16] = { 263 -1, 264 72, /* Up */ 265 63, /* Home (F5) */ 266 -1, 267 75, /* Left */ 268 28, /* Enter */ 269 77, /* Right */ 270 -1, 271 1, /* Cycle (ESC) */ 272 80, /* Down */ 273 62, /* Menu (F4) */ 274 -1, 275 66, /* Zoom- (F8) */ 276 64, /* FullScreen (F6) */ 277 65, /* Zoom+ (F7) */ 278 -1, 279 }; 280 281 static void n800_tsc_kbd_setup(struct n800_s *s) 282 { 283 int i; 284 285 /* XXX: are the three pins inverted inside the chip between the 286 * tsc and the cpu (N4111)? */ 287 qemu_irq penirq = NULL; /* NC */ 288 qemu_irq kbirq = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_KP_IRQ_GPIO); 289 qemu_irq dav = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_TS_GPIO); 290 291 s->ts.chip = tsc2301_init(penirq, kbirq, dav); 292 s->ts.opaque = s->ts.chip->opaque; 293 s->ts.txrx = tsc210x_txrx; 294 295 for (i = 0; i < 0x80; i++) { 296 s->keymap[i] = -1; 297 } 298 for (i = 0; i < 0x10; i++) { 299 if (n800_keys[i] >= 0) { 300 s->keymap[n800_keys[i]] = i; 301 } 302 } 303 304 qemu_add_kbd_event_handler(n800_key_event, s); 305 306 tsc210x_set_transform(s->ts.chip, &n800_pointercal); 307 } 308 309 static void n810_tsc_setup(struct n800_s *s) 310 { 311 qemu_irq pintdav = qdev_get_gpio_in(s->mpu->gpio, N810_TSC_TS_GPIO); 312 313 s->ts.opaque = tsc2005_init(pintdav); 314 s->ts.txrx = tsc2005_txrx; 315 316 tsc2005_set_transform(s->ts.opaque, &n810_pointercal); 317 } 318 319 /* N810 Keyboard controller */ 320 static void n810_key_event(void *opaque, int keycode) 321 { 322 struct n800_s *s = (struct n800_s *) opaque; 323 int code = s->keymap[keycode & 0x7f]; 324 325 if (code == -1) { 326 if ((keycode & 0x7f) == RETU_KEYCODE) { 327 retu_key_event(s->retu, !(keycode & 0x80)); 328 } 329 return; 330 } 331 332 lm832x_key_event(s->kbd, code, !(keycode & 0x80)); 333 } 334 335 #define M 0 336 337 static int n810_keys[0x80] = { 338 [0x01] = 16, /* Q */ 339 [0x02] = 37, /* K */ 340 [0x03] = 24, /* O */ 341 [0x04] = 25, /* P */ 342 [0x05] = 14, /* Backspace */ 343 [0x06] = 30, /* A */ 344 [0x07] = 31, /* S */ 345 [0x08] = 32, /* D */ 346 [0x09] = 33, /* F */ 347 [0x0a] = 34, /* G */ 348 [0x0b] = 35, /* H */ 349 [0x0c] = 36, /* J */ 350 351 [0x11] = 17, /* W */ 352 [0x12] = 62, /* Menu (F4) */ 353 [0x13] = 38, /* L */ 354 [0x14] = 40, /* ' (Apostrophe) */ 355 [0x16] = 44, /* Z */ 356 [0x17] = 45, /* X */ 357 [0x18] = 46, /* C */ 358 [0x19] = 47, /* V */ 359 [0x1a] = 48, /* B */ 360 [0x1b] = 49, /* N */ 361 [0x1c] = 42, /* Shift (Left shift) */ 362 [0x1f] = 65, /* Zoom+ (F7) */ 363 364 [0x21] = 18, /* E */ 365 [0x22] = 39, /* ; (Semicolon) */ 366 [0x23] = 12, /* - (Minus) */ 367 [0x24] = 13, /* = (Equal) */ 368 [0x2b] = 56, /* Fn (Left Alt) */ 369 [0x2c] = 50, /* M */ 370 [0x2f] = 66, /* Zoom- (F8) */ 371 372 [0x31] = 19, /* R */ 373 [0x32] = 29 | M, /* Right Ctrl */ 374 [0x34] = 57, /* Space */ 375 [0x35] = 51, /* , (Comma) */ 376 [0x37] = 72 | M, /* Up */ 377 [0x3c] = 82 | M, /* Compose (Insert) */ 378 [0x3f] = 64, /* FullScreen (F6) */ 379 380 [0x41] = 20, /* T */ 381 [0x44] = 52, /* . (Dot) */ 382 [0x46] = 77 | M, /* Right */ 383 [0x4f] = 63, /* Home (F5) */ 384 [0x51] = 21, /* Y */ 385 [0x53] = 80 | M, /* Down */ 386 [0x55] = 28, /* Enter */ 387 [0x5f] = 1, /* Cycle (ESC) */ 388 389 [0x61] = 22, /* U */ 390 [0x64] = 75 | M, /* Left */ 391 392 [0x71] = 23, /* I */ 393 #if 0 394 [0x75] = 28 | M, /* KP Enter (KP Enter) */ 395 #else 396 [0x75] = 15, /* KP Enter (Tab) */ 397 #endif 398 }; 399 400 #undef M 401 402 static void n810_kbd_setup(struct n800_s *s) 403 { 404 qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO); 405 int i; 406 407 for (i = 0; i < 0x80; i++) { 408 s->keymap[i] = -1; 409 } 410 for (i = 0; i < 0x80; i++) { 411 if (n810_keys[i] > 0) { 412 s->keymap[n810_keys[i]] = i; 413 } 414 } 415 416 qemu_add_kbd_event_handler(n810_key_event, s); 417 418 /* Attach the LM8322 keyboard to the I2C bus, 419 * should happen in n8x0_i2c_setup and s->kbd be initialised here. */ 420 s->kbd = i2c_create_slave(omap_i2c_bus(s->mpu->i2c[0]), 421 "lm8323", N810_LM8323_ADDR); 422 qdev_connect_gpio_out(s->kbd, 0, kbd_irq); 423 } 424 425 /* LCD MIPI DBI-C controller (URAL) */ 426 struct mipid_s { 427 int resp[4]; 428 int param[4]; 429 int p; 430 int pm; 431 int cmd; 432 433 int sleep; 434 int booster; 435 int te; 436 int selfcheck; 437 int partial; 438 int normal; 439 int vscr; 440 int invert; 441 int onoff; 442 int gamma; 443 uint32_t id; 444 }; 445 446 static void mipid_reset(struct mipid_s *s) 447 { 448 s->pm = 0; 449 s->cmd = 0; 450 451 s->sleep = 1; 452 s->booster = 0; 453 s->selfcheck = 454 (1 << 7) | /* Register loading OK. */ 455 (1 << 5) | /* The chip is attached. */ 456 (1 << 4); /* Display glass still in one piece. */ 457 s->te = 0; 458 s->partial = 0; 459 s->normal = 1; 460 s->vscr = 0; 461 s->invert = 0; 462 s->onoff = 1; 463 s->gamma = 0; 464 } 465 466 static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len) 467 { 468 struct mipid_s *s = (struct mipid_s *) opaque; 469 uint8_t ret; 470 471 if (len > 9) { 472 hw_error("%s: FIXME: bad SPI word width %i\n", __func__, len); 473 } 474 475 if (s->p >= ARRAY_SIZE(s->resp)) { 476 ret = 0; 477 } else { 478 ret = s->resp[s->p++]; 479 } 480 if (s->pm-- > 0) { 481 s->param[s->pm] = cmd; 482 } else { 483 s->cmd = cmd; 484 } 485 486 switch (s->cmd) { 487 case 0x00: /* NOP */ 488 break; 489 490 case 0x01: /* SWRESET */ 491 mipid_reset(s); 492 break; 493 494 case 0x02: /* BSTROFF */ 495 s->booster = 0; 496 break; 497 case 0x03: /* BSTRON */ 498 s->booster = 1; 499 break; 500 501 case 0x04: /* RDDID */ 502 s->p = 0; 503 s->resp[0] = (s->id >> 16) & 0xff; 504 s->resp[1] = (s->id >> 8) & 0xff; 505 s->resp[2] = (s->id >> 0) & 0xff; 506 break; 507 508 case 0x06: /* RD_RED */ 509 case 0x07: /* RD_GREEN */ 510 /* XXX the bootloader sometimes issues RD_BLUE meaning RDDID so 511 * for the bootloader one needs to change this. */ 512 case 0x08: /* RD_BLUE */ 513 s->p = 0; 514 /* TODO: return first pixel components */ 515 s->resp[0] = 0x01; 516 break; 517 518 case 0x09: /* RDDST */ 519 s->p = 0; 520 s->resp[0] = s->booster << 7; 521 s->resp[1] = (5 << 4) | (s->partial << 2) | 522 (s->sleep << 1) | s->normal; 523 s->resp[2] = (s->vscr << 7) | (s->invert << 5) | 524 (s->onoff << 2) | (s->te << 1) | (s->gamma >> 2); 525 s->resp[3] = s->gamma << 6; 526 break; 527 528 case 0x0a: /* RDDPM */ 529 s->p = 0; 530 s->resp[0] = (s->onoff << 2) | (s->normal << 3) | (s->sleep << 4) | 531 (s->partial << 5) | (s->sleep << 6) | (s->booster << 7); 532 break; 533 case 0x0b: /* RDDMADCTR */ 534 s->p = 0; 535 s->resp[0] = 0; 536 break; 537 case 0x0c: /* RDDCOLMOD */ 538 s->p = 0; 539 s->resp[0] = 5; /* 65K colours */ 540 break; 541 case 0x0d: /* RDDIM */ 542 s->p = 0; 543 s->resp[0] = (s->invert << 5) | (s->vscr << 7) | s->gamma; 544 break; 545 case 0x0e: /* RDDSM */ 546 s->p = 0; 547 s->resp[0] = s->te << 7; 548 break; 549 case 0x0f: /* RDDSDR */ 550 s->p = 0; 551 s->resp[0] = s->selfcheck; 552 break; 553 554 case 0x10: /* SLPIN */ 555 s->sleep = 1; 556 break; 557 case 0x11: /* SLPOUT */ 558 s->sleep = 0; 559 s->selfcheck ^= 1 << 6; /* POFF self-diagnosis Ok */ 560 break; 561 562 case 0x12: /* PTLON */ 563 s->partial = 1; 564 s->normal = 0; 565 s->vscr = 0; 566 break; 567 case 0x13: /* NORON */ 568 s->partial = 0; 569 s->normal = 1; 570 s->vscr = 0; 571 break; 572 573 case 0x20: /* INVOFF */ 574 s->invert = 0; 575 break; 576 case 0x21: /* INVON */ 577 s->invert = 1; 578 break; 579 580 case 0x22: /* APOFF */ 581 case 0x23: /* APON */ 582 goto bad_cmd; 583 584 case 0x25: /* WRCNTR */ 585 if (s->pm < 0) { 586 s->pm = 1; 587 } 588 goto bad_cmd; 589 590 case 0x26: /* GAMSET */ 591 if (!s->pm) { 592 s->gamma = ctz32(s->param[0] & 0xf); 593 if (s->gamma == 32) { 594 s->gamma = -1; /* XXX: should this be 0? */ 595 } 596 } else if (s->pm < 0) { 597 s->pm = 1; 598 } 599 break; 600 601 case 0x28: /* DISPOFF */ 602 s->onoff = 0; 603 break; 604 case 0x29: /* DISPON */ 605 s->onoff = 1; 606 break; 607 608 case 0x2a: /* CASET */ 609 case 0x2b: /* RASET */ 610 case 0x2c: /* RAMWR */ 611 case 0x2d: /* RGBSET */ 612 case 0x2e: /* RAMRD */ 613 case 0x30: /* PTLAR */ 614 case 0x33: /* SCRLAR */ 615 goto bad_cmd; 616 617 case 0x34: /* TEOFF */ 618 s->te = 0; 619 break; 620 case 0x35: /* TEON */ 621 if (!s->pm) { 622 s->te = 1; 623 } else if (s->pm < 0) { 624 s->pm = 1; 625 } 626 break; 627 628 case 0x36: /* MADCTR */ 629 goto bad_cmd; 630 631 case 0x37: /* VSCSAD */ 632 s->partial = 0; 633 s->normal = 0; 634 s->vscr = 1; 635 break; 636 637 case 0x38: /* IDMOFF */ 638 case 0x39: /* IDMON */ 639 case 0x3a: /* COLMOD */ 640 goto bad_cmd; 641 642 case 0xb0: /* CLKINT / DISCTL */ 643 case 0xb1: /* CLKEXT */ 644 if (s->pm < 0) { 645 s->pm = 2; 646 } 647 break; 648 649 case 0xb4: /* FRMSEL */ 650 break; 651 652 case 0xb5: /* FRM8SEL */ 653 case 0xb6: /* TMPRNG / INIESC */ 654 case 0xb7: /* TMPHIS / NOP2 */ 655 case 0xb8: /* TMPREAD / MADCTL */ 656 case 0xba: /* DISTCTR */ 657 case 0xbb: /* EPVOL */ 658 goto bad_cmd; 659 660 case 0xbd: /* Unknown */ 661 s->p = 0; 662 s->resp[0] = 0; 663 s->resp[1] = 1; 664 break; 665 666 case 0xc2: /* IFMOD */ 667 if (s->pm < 0) { 668 s->pm = 2; 669 } 670 break; 671 672 case 0xc6: /* PWRCTL */ 673 case 0xc7: /* PPWRCTL */ 674 case 0xd0: /* EPWROUT */ 675 case 0xd1: /* EPWRIN */ 676 case 0xd4: /* RDEV */ 677 case 0xd5: /* RDRR */ 678 goto bad_cmd; 679 680 case 0xda: /* RDID1 */ 681 s->p = 0; 682 s->resp[0] = (s->id >> 16) & 0xff; 683 break; 684 case 0xdb: /* RDID2 */ 685 s->p = 0; 686 s->resp[0] = (s->id >> 8) & 0xff; 687 break; 688 case 0xdc: /* RDID3 */ 689 s->p = 0; 690 s->resp[0] = (s->id >> 0) & 0xff; 691 break; 692 693 default: 694 bad_cmd: 695 qemu_log_mask(LOG_GUEST_ERROR, 696 "%s: unknown command %02x\n", __func__, s->cmd); 697 break; 698 } 699 700 return ret; 701 } 702 703 static void *mipid_init(void) 704 { 705 struct mipid_s *s = (struct mipid_s *) g_malloc0(sizeof(*s)); 706 707 s->id = 0x838f03; 708 mipid_reset(s); 709 710 return s; 711 } 712 713 static void n8x0_spi_setup(struct n800_s *s) 714 { 715 void *tsc = s->ts.opaque; 716 void *mipid = mipid_init(); 717 718 omap_mcspi_attach(s->mpu->mcspi[0], s->ts.txrx, tsc, 0); 719 omap_mcspi_attach(s->mpu->mcspi[0], mipid_txrx, mipid, 1); 720 } 721 722 /* This task is normally performed by the bootloader. If we're loading 723 * a kernel directly, we need to enable the Blizzard ourselves. */ 724 static void n800_dss_init(struct rfbi_chip_s *chip) 725 { 726 uint8_t *fb_blank; 727 728 chip->write(chip->opaque, 0, 0x2a); /* LCD Width register */ 729 chip->write(chip->opaque, 1, 0x64); 730 chip->write(chip->opaque, 0, 0x2c); /* LCD HNDP register */ 731 chip->write(chip->opaque, 1, 0x1e); 732 chip->write(chip->opaque, 0, 0x2e); /* LCD Height 0 register */ 733 chip->write(chip->opaque, 1, 0xe0); 734 chip->write(chip->opaque, 0, 0x30); /* LCD Height 1 register */ 735 chip->write(chip->opaque, 1, 0x01); 736 chip->write(chip->opaque, 0, 0x32); /* LCD VNDP register */ 737 chip->write(chip->opaque, 1, 0x06); 738 chip->write(chip->opaque, 0, 0x68); /* Display Mode register */ 739 chip->write(chip->opaque, 1, 1); /* Enable bit */ 740 741 chip->write(chip->opaque, 0, 0x6c); 742 chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */ 743 chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */ 744 chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */ 745 chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */ 746 chip->write(chip->opaque, 1, 0x1f); /* Input X End Position */ 747 chip->write(chip->opaque, 1, 0x03); /* Input X End Position */ 748 chip->write(chip->opaque, 1, 0xdf); /* Input Y End Position */ 749 chip->write(chip->opaque, 1, 0x01); /* Input Y End Position */ 750 chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */ 751 chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */ 752 chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */ 753 chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */ 754 chip->write(chip->opaque, 1, 0x1f); /* Output X End Position */ 755 chip->write(chip->opaque, 1, 0x03); /* Output X End Position */ 756 chip->write(chip->opaque, 1, 0xdf); /* Output Y End Position */ 757 chip->write(chip->opaque, 1, 0x01); /* Output Y End Position */ 758 chip->write(chip->opaque, 1, 0x01); /* Input Data Format */ 759 chip->write(chip->opaque, 1, 0x01); /* Data Source Select */ 760 761 fb_blank = memset(g_malloc(800 * 480 * 2), 0xff, 800 * 480 * 2); 762 /* Display Memory Data Port */ 763 chip->block(chip->opaque, 1, fb_blank, 800 * 480 * 2, 800); 764 g_free(fb_blank); 765 } 766 767 static void n8x0_dss_setup(struct n800_s *s) 768 { 769 s->blizzard.opaque = s1d13745_init(NULL); 770 s->blizzard.block = s1d13745_write_block; 771 s->blizzard.write = s1d13745_write; 772 s->blizzard.read = s1d13745_read; 773 774 omap_rfbi_attach(s->mpu->dss, 0, &s->blizzard); 775 } 776 777 static void n8x0_cbus_setup(struct n800_s *s) 778 { 779 qemu_irq dat_out = qdev_get_gpio_in(s->mpu->gpio, N8X0_CBUS_DAT_GPIO); 780 qemu_irq retu_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_RETU_GPIO); 781 qemu_irq tahvo_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TAHVO_GPIO); 782 783 CBus *cbus = cbus_init(dat_out); 784 785 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk); 786 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat); 787 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel); 788 789 cbus_attach(cbus, s->retu = retu_init(retu_irq, 1)); 790 cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1)); 791 } 792 793 static void n8x0_uart_setup(struct n800_s *s) 794 { 795 Chardev *radio = qemu_chr_new("bt-dummy-uart", "null", NULL); 796 /* 797 * Note: We used to connect N8X0_BT_RESET_GPIO and N8X0_BT_WKUP_GPIO 798 * here, but this code has been removed with the bluetooth backend. 799 */ 800 omap_uart_attach(s->mpu->uart[BT_UART], radio); 801 } 802 803 static void n8x0_usb_setup(struct n800_s *s) 804 { 805 SysBusDevice *dev; 806 s->usb = qdev_create(NULL, "tusb6010"); 807 dev = SYS_BUS_DEVICE(s->usb); 808 qdev_init_nofail(s->usb); 809 sysbus_connect_irq(dev, 0, 810 qdev_get_gpio_in(s->mpu->gpio, N8X0_TUSB_INT_GPIO)); 811 /* Using the NOR interface */ 812 omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_ASYNC_CS, 813 sysbus_mmio_get_region(dev, 0)); 814 omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_SYNC_CS, 815 sysbus_mmio_get_region(dev, 1)); 816 qdev_connect_gpio_out(s->mpu->gpio, N8X0_TUSB_ENABLE_GPIO, 817 qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */ 818 } 819 820 /* Setup done before the main bootloader starts by some early setup code 821 * - used when we want to run the main bootloader in emulation. This 822 * isn't documented. */ 823 static uint32_t n800_pinout[104] = { 824 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0, 825 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808, 826 0x08080808, 0x180800c4, 0x00b80000, 0x08080808, 827 0x080800bc, 0x00cc0808, 0x08081818, 0x18180128, 828 0x01241800, 0x18181818, 0x000000f0, 0x01300000, 829 0x00001b0b, 0x1b0f0138, 0x00e0181b, 0x1b031b0b, 830 0x180f0078, 0x00740018, 0x0f0f0f1a, 0x00000080, 831 0x007c0000, 0x00000000, 0x00000088, 0x00840000, 832 0x00000000, 0x00000094, 0x00980300, 0x0f180003, 833 0x0000008c, 0x00900f0f, 0x0f0f1b00, 0x0f00009c, 834 0x01140000, 0x1b1b0f18, 0x0818013c, 0x01400008, 835 0x00001818, 0x000b0110, 0x010c1800, 0x0b030b0f, 836 0x181800f4, 0x00f81818, 0x00000018, 0x000000fc, 837 0x00401808, 0x00000000, 0x0f1b0030, 0x003c0008, 838 0x00000000, 0x00000038, 0x00340000, 0x00000000, 839 0x1a080070, 0x00641a1a, 0x08080808, 0x08080060, 840 0x005c0808, 0x08080808, 0x08080058, 0x00540808, 841 0x08080808, 0x0808006c, 0x00680808, 0x08080808, 842 0x000000a8, 0x00b00000, 0x08080808, 0x000000a0, 843 0x00a40000, 0x00000000, 0x08ff0050, 0x004c0808, 844 0xffffffff, 0xffff0048, 0x0044ffff, 0xffffffff, 845 0x000000ac, 0x01040800, 0x08080b0f, 0x18180100, 846 0x01081818, 0x0b0b1808, 0x1a0300e4, 0x012c0b1a, 847 0x02020018, 0x0b000134, 0x011c0800, 0x0b1b1b00, 848 0x0f0000c8, 0x00ec181b, 0x000f0f02, 0x00180118, 849 0x01200000, 0x0f0b1b1b, 0x0f0200e8, 0x0000020b, 850 }; 851 852 static void n800_setup_nolo_tags(void *sram_base) 853 { 854 int i; 855 uint32_t *p = sram_base + 0x8000; 856 uint32_t *v = sram_base + 0xa000; 857 858 memset(p, 0, 0x3000); 859 860 strcpy((void *) (p + 0), "QEMU N800"); 861 862 strcpy((void *) (p + 8), "F5"); 863 864 stl_p(p + 10, 0x04f70000); 865 strcpy((void *) (p + 9), "RX-34"); 866 867 /* RAM size in MB? */ 868 stl_p(p + 12, 0x80); 869 870 /* Pointer to the list of tags */ 871 stl_p(p + 13, OMAP2_SRAM_BASE + 0x9000); 872 873 /* The NOLO tags start here */ 874 p = sram_base + 0x9000; 875 #define ADD_TAG(tag, len) \ 876 stw_p((uint16_t *) p + 0, tag); \ 877 stw_p((uint16_t *) p + 1, len); p++; \ 878 stl_p(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff)); 879 880 /* OMAP STI console? Pin out settings? */ 881 ADD_TAG(0x6e01, 414); 882 for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) { 883 stl_p(v++, n800_pinout[i]); 884 } 885 886 /* Kernel memsize? */ 887 ADD_TAG(0x6e05, 1); 888 stl_p(v++, 2); 889 890 /* NOLO serial console */ 891 ADD_TAG(0x6e02, 4); 892 stl_p(v++, XLDR_LL_UART); /* UART number (1 - 3) */ 893 894 #if 0 895 /* CBUS settings (Retu/AVilma) */ 896 ADD_TAG(0x6e03, 6); 897 stw_p((uint16_t *) v + 0, 65); /* CBUS GPIO0 */ 898 stw_p((uint16_t *) v + 1, 66); /* CBUS GPIO1 */ 899 stw_p((uint16_t *) v + 2, 64); /* CBUS GPIO2 */ 900 v += 2; 901 #endif 902 903 /* Nokia ASIC BB5 (Retu/Tahvo) */ 904 ADD_TAG(0x6e0a, 4); 905 stw_p((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */ 906 stw_p((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */ 907 v++; 908 909 /* LCD console? */ 910 ADD_TAG(0x6e04, 4); 911 stw_p((uint16_t *) v + 0, 30); /* ??? */ 912 stw_p((uint16_t *) v + 1, 24); /* ??? */ 913 v++; 914 915 #if 0 916 /* LCD settings */ 917 ADD_TAG(0x6e06, 2); 918 stw_p((uint16_t *) (v++), 15); /* ??? */ 919 #endif 920 921 /* I^2C (Menelaus) */ 922 ADD_TAG(0x6e07, 4); 923 stl_p(v++, 0x00720000); /* ??? */ 924 925 /* Unknown */ 926 ADD_TAG(0x6e0b, 6); 927 stw_p((uint16_t *) v + 0, 94); /* ??? */ 928 stw_p((uint16_t *) v + 1, 23); /* ??? */ 929 stw_p((uint16_t *) v + 2, 0); /* ??? */ 930 v += 2; 931 932 /* OMAP gpio switch info */ 933 ADD_TAG(0x6e0c, 80); 934 strcpy((void *) v, "bat_cover"); v += 3; 935 stw_p((uint16_t *) v + 0, 110); /* GPIO num ??? */ 936 stw_p((uint16_t *) v + 1, 1); /* GPIO num ??? */ 937 v += 2; 938 strcpy((void *) v, "cam_act"); v += 3; 939 stw_p((uint16_t *) v + 0, 95); /* GPIO num ??? */ 940 stw_p((uint16_t *) v + 1, 32); /* GPIO num ??? */ 941 v += 2; 942 strcpy((void *) v, "cam_turn"); v += 3; 943 stw_p((uint16_t *) v + 0, 12); /* GPIO num ??? */ 944 stw_p((uint16_t *) v + 1, 33); /* GPIO num ??? */ 945 v += 2; 946 strcpy((void *) v, "headphone"); v += 3; 947 stw_p((uint16_t *) v + 0, 107); /* GPIO num ??? */ 948 stw_p((uint16_t *) v + 1, 17); /* GPIO num ??? */ 949 v += 2; 950 951 /* Bluetooth */ 952 ADD_TAG(0x6e0e, 12); 953 stl_p(v++, 0x5c623d01); /* ??? */ 954 stl_p(v++, 0x00000201); /* ??? */ 955 stl_p(v++, 0x00000000); /* ??? */ 956 957 /* CX3110x WLAN settings */ 958 ADD_TAG(0x6e0f, 8); 959 stl_p(v++, 0x00610025); /* ??? */ 960 stl_p(v++, 0xffff0057); /* ??? */ 961 962 /* MMC host settings */ 963 ADD_TAG(0x6e10, 12); 964 stl_p(v++, 0xffff000f); /* ??? */ 965 stl_p(v++, 0xffffffff); /* ??? */ 966 stl_p(v++, 0x00000060); /* ??? */ 967 968 /* OneNAND chip select */ 969 ADD_TAG(0x6e11, 10); 970 stl_p(v++, 0x00000401); /* ??? */ 971 stl_p(v++, 0x0002003a); /* ??? */ 972 stl_p(v++, 0x00000002); /* ??? */ 973 974 /* TEA5761 sensor settings */ 975 ADD_TAG(0x6e12, 2); 976 stl_p(v++, 93); /* GPIO num ??? */ 977 978 #if 0 979 /* Unknown tag */ 980 ADD_TAG(6e09, 0); 981 982 /* Kernel UART / console */ 983 ADD_TAG(6e12, 0); 984 #endif 985 986 /* End of the list */ 987 stl_p(p++, 0x00000000); 988 stl_p(p++, 0x00000000); 989 } 990 991 /* This task is normally performed by the bootloader. If we're loading 992 * a kernel directly, we need to set up GPMC mappings ourselves. */ 993 static void n800_gpmc_init(struct n800_s *s) 994 { 995 uint32_t config7 = 996 (0xf << 8) | /* MASKADDRESS */ 997 (1 << 6) | /* CSVALID */ 998 (4 << 0); /* BASEADDRESS */ 999 1000 cpu_physical_memory_write(0x6800a078, /* GPMC_CONFIG7_0 */ 1001 &config7, sizeof(config7)); 1002 } 1003 1004 /* Setup sequence done by the bootloader */ 1005 static void n8x0_boot_init(void *opaque) 1006 { 1007 struct n800_s *s = (struct n800_s *) opaque; 1008 uint32_t buf; 1009 1010 /* PRCM setup */ 1011 #define omap_writel(addr, val) \ 1012 buf = (val); \ 1013 cpu_physical_memory_write(addr, &buf, sizeof(buf)) 1014 1015 omap_writel(0x48008060, 0x41); /* PRCM_CLKSRC_CTRL */ 1016 omap_writel(0x48008070, 1); /* PRCM_CLKOUT_CTRL */ 1017 omap_writel(0x48008078, 0); /* PRCM_CLKEMUL_CTRL */ 1018 omap_writel(0x48008090, 0); /* PRCM_VOLTSETUP */ 1019 omap_writel(0x48008094, 0); /* PRCM_CLKSSETUP */ 1020 omap_writel(0x48008098, 0); /* PRCM_POLCTRL */ 1021 omap_writel(0x48008140, 2); /* CM_CLKSEL_MPU */ 1022 omap_writel(0x48008148, 0); /* CM_CLKSTCTRL_MPU */ 1023 omap_writel(0x48008158, 1); /* RM_RSTST_MPU */ 1024 omap_writel(0x480081c8, 0x15); /* PM_WKDEP_MPU */ 1025 omap_writel(0x480081d4, 0x1d4); /* PM_EVGENCTRL_MPU */ 1026 omap_writel(0x480081d8, 0); /* PM_EVEGENONTIM_MPU */ 1027 omap_writel(0x480081dc, 0); /* PM_EVEGENOFFTIM_MPU */ 1028 omap_writel(0x480081e0, 0xc); /* PM_PWSTCTRL_MPU */ 1029 omap_writel(0x48008200, 0x047e7ff7); /* CM_FCLKEN1_CORE */ 1030 omap_writel(0x48008204, 0x00000004); /* CM_FCLKEN2_CORE */ 1031 omap_writel(0x48008210, 0x047e7ff1); /* CM_ICLKEN1_CORE */ 1032 omap_writel(0x48008214, 0x00000004); /* CM_ICLKEN2_CORE */ 1033 omap_writel(0x4800821c, 0x00000000); /* CM_ICLKEN4_CORE */ 1034 omap_writel(0x48008230, 0); /* CM_AUTOIDLE1_CORE */ 1035 omap_writel(0x48008234, 0); /* CM_AUTOIDLE2_CORE */ 1036 omap_writel(0x48008238, 7); /* CM_AUTOIDLE3_CORE */ 1037 omap_writel(0x4800823c, 0); /* CM_AUTOIDLE4_CORE */ 1038 omap_writel(0x48008240, 0x04360626); /* CM_CLKSEL1_CORE */ 1039 omap_writel(0x48008244, 0x00000014); /* CM_CLKSEL2_CORE */ 1040 omap_writel(0x48008248, 0); /* CM_CLKSTCTRL_CORE */ 1041 omap_writel(0x48008300, 0x00000000); /* CM_FCLKEN_GFX */ 1042 omap_writel(0x48008310, 0x00000000); /* CM_ICLKEN_GFX */ 1043 omap_writel(0x48008340, 0x00000001); /* CM_CLKSEL_GFX */ 1044 omap_writel(0x48008400, 0x00000004); /* CM_FCLKEN_WKUP */ 1045 omap_writel(0x48008410, 0x00000004); /* CM_ICLKEN_WKUP */ 1046 omap_writel(0x48008440, 0x00000000); /* CM_CLKSEL_WKUP */ 1047 omap_writel(0x48008500, 0x000000cf); /* CM_CLKEN_PLL */ 1048 omap_writel(0x48008530, 0x0000000c); /* CM_AUTOIDLE_PLL */ 1049 omap_writel(0x48008540, /* CM_CLKSEL1_PLL */ 1050 (0x78 << 12) | (6 << 8)); 1051 omap_writel(0x48008544, 2); /* CM_CLKSEL2_PLL */ 1052 1053 /* GPMC setup */ 1054 n800_gpmc_init(s); 1055 1056 /* Video setup */ 1057 n800_dss_init(&s->blizzard); 1058 1059 /* CPU setup */ 1060 s->mpu->cpu->env.GE = 0x5; 1061 1062 /* If the machine has a slided keyboard, open it */ 1063 if (s->kbd) { 1064 qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO)); 1065 } 1066 } 1067 1068 #define OMAP_TAG_NOKIA_BT 0x4e01 1069 #define OMAP_TAG_WLAN_CX3110X 0x4e02 1070 #define OMAP_TAG_CBUS 0x4e03 1071 #define OMAP_TAG_EM_ASIC_BB5 0x4e04 1072 1073 static struct omap_gpiosw_info_s { 1074 const char *name; 1075 int line; 1076 int type; 1077 } n800_gpiosw_info[] = { 1078 { 1079 "bat_cover", N800_BAT_COVER_GPIO, 1080 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, 1081 }, { 1082 "cam_act", N800_CAM_ACT_GPIO, 1083 OMAP_GPIOSW_TYPE_ACTIVITY, 1084 }, { 1085 "cam_turn", N800_CAM_TURN_GPIO, 1086 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED, 1087 }, { 1088 "headphone", N8X0_HEADPHONE_GPIO, 1089 OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, 1090 }, 1091 { NULL } 1092 }, n810_gpiosw_info[] = { 1093 { 1094 "gps_reset", N810_GPS_RESET_GPIO, 1095 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT, 1096 }, { 1097 "gps_wakeup", N810_GPS_WAKEUP_GPIO, 1098 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT, 1099 }, { 1100 "headphone", N8X0_HEADPHONE_GPIO, 1101 OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, 1102 }, { 1103 "kb_lock", N810_KB_LOCK_GPIO, 1104 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, 1105 }, { 1106 "sleepx_led", N810_SLEEPX_LED_GPIO, 1107 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED | OMAP_GPIOSW_OUTPUT, 1108 }, { 1109 "slide", N810_SLIDE_GPIO, 1110 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, 1111 }, 1112 { NULL } 1113 }; 1114 1115 static struct omap_partition_info_s { 1116 uint32_t offset; 1117 uint32_t size; 1118 int mask; 1119 const char *name; 1120 } n800_part_info[] = { 1121 { 0x00000000, 0x00020000, 0x3, "bootloader" }, 1122 { 0x00020000, 0x00060000, 0x0, "config" }, 1123 { 0x00080000, 0x00200000, 0x0, "kernel" }, 1124 { 0x00280000, 0x00200000, 0x3, "initfs" }, 1125 { 0x00480000, 0x0fb80000, 0x3, "rootfs" }, 1126 1127 { 0, 0, 0, NULL } 1128 }, n810_part_info[] = { 1129 { 0x00000000, 0x00020000, 0x3, "bootloader" }, 1130 { 0x00020000, 0x00060000, 0x0, "config" }, 1131 { 0x00080000, 0x00220000, 0x0, "kernel" }, 1132 { 0x002a0000, 0x00400000, 0x0, "initfs" }, 1133 { 0x006a0000, 0x0f960000, 0x0, "rootfs" }, 1134 1135 { 0, 0, 0, NULL } 1136 }; 1137 1138 static uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; 1139 1140 static int n8x0_atag_setup(void *p, int model) 1141 { 1142 uint8_t *b; 1143 uint16_t *w; 1144 uint32_t *l; 1145 struct omap_gpiosw_info_s *gpiosw; 1146 struct omap_partition_info_s *partition; 1147 const char *tag; 1148 1149 w = p; 1150 1151 stw_p(w++, OMAP_TAG_UART); /* u16 tag */ 1152 stw_p(w++, 4); /* u16 len */ 1153 stw_p(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */ 1154 w++; 1155 1156 #if 0 1157 stw_p(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */ 1158 stw_p(w++, 4); /* u16 len */ 1159 stw_p(w++, XLDR_LL_UART + 1); /* u8 console_uart */ 1160 stw_p(w++, 115200); /* u32 console_speed */ 1161 #endif 1162 1163 stw_p(w++, OMAP_TAG_LCD); /* u16 tag */ 1164 stw_p(w++, 36); /* u16 len */ 1165 strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */ 1166 w += 8; 1167 strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */ 1168 w += 8; 1169 stw_p(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */ 1170 stw_p(w++, 24); /* u8 data_lines */ 1171 1172 stw_p(w++, OMAP_TAG_CBUS); /* u16 tag */ 1173 stw_p(w++, 8); /* u16 len */ 1174 stw_p(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */ 1175 stw_p(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */ 1176 stw_p(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */ 1177 w++; 1178 1179 stw_p(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */ 1180 stw_p(w++, 4); /* u16 len */ 1181 stw_p(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */ 1182 stw_p(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */ 1183 1184 gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info; 1185 for (; gpiosw->name; gpiosw++) { 1186 stw_p(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */ 1187 stw_p(w++, 20); /* u16 len */ 1188 strcpy((void *) w, gpiosw->name); /* char name[12] */ 1189 w += 6; 1190 stw_p(w++, gpiosw->line); /* u16 gpio */ 1191 stw_p(w++, gpiosw->type); 1192 stw_p(w++, 0); 1193 stw_p(w++, 0); 1194 } 1195 1196 stw_p(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */ 1197 stw_p(w++, 12); /* u16 len */ 1198 b = (void *) w; 1199 stb_p(b++, 0x01); /* u8 chip_type (CSR) */ 1200 stb_p(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */ 1201 stb_p(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */ 1202 stb_p(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */ 1203 stb_p(b++, BT_UART + 1); /* u8 bt_uart */ 1204 memcpy(b, &n8x0_bd_addr, 6); /* u8 bd_addr[6] */ 1205 b += 6; 1206 stb_p(b++, 0x02); /* u8 bt_sysclk (38.4) */ 1207 w = (void *) b; 1208 1209 stw_p(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */ 1210 stw_p(w++, 8); /* u16 len */ 1211 stw_p(w++, 0x25); /* u8 chip_type */ 1212 stw_p(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */ 1213 stw_p(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */ 1214 stw_p(w++, -1); /* s16 spi_cs_gpio */ 1215 1216 stw_p(w++, OMAP_TAG_MMC); /* u16 tag */ 1217 stw_p(w++, 16); /* u16 len */ 1218 if (model == 810) { 1219 stw_p(w++, 0x23f); /* unsigned flags */ 1220 stw_p(w++, -1); /* s16 power_pin */ 1221 stw_p(w++, -1); /* s16 switch_pin */ 1222 stw_p(w++, -1); /* s16 wp_pin */ 1223 stw_p(w++, 0x240); /* unsigned flags */ 1224 stw_p(w++, 0xc000); /* s16 power_pin */ 1225 stw_p(w++, 0x0248); /* s16 switch_pin */ 1226 stw_p(w++, 0xc000); /* s16 wp_pin */ 1227 } else { 1228 stw_p(w++, 0xf); /* unsigned flags */ 1229 stw_p(w++, -1); /* s16 power_pin */ 1230 stw_p(w++, -1); /* s16 switch_pin */ 1231 stw_p(w++, -1); /* s16 wp_pin */ 1232 stw_p(w++, 0); /* unsigned flags */ 1233 stw_p(w++, 0); /* s16 power_pin */ 1234 stw_p(w++, 0); /* s16 switch_pin */ 1235 stw_p(w++, 0); /* s16 wp_pin */ 1236 } 1237 1238 stw_p(w++, OMAP_TAG_TEA5761); /* u16 tag */ 1239 stw_p(w++, 4); /* u16 len */ 1240 stw_p(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */ 1241 w++; 1242 1243 partition = (model == 810) ? n810_part_info : n800_part_info; 1244 for (; partition->name; partition++) { 1245 stw_p(w++, OMAP_TAG_PARTITION); /* u16 tag */ 1246 stw_p(w++, 28); /* u16 len */ 1247 strcpy((void *) w, partition->name); /* char name[16] */ 1248 l = (void *) (w + 8); 1249 stl_p(l++, partition->size); /* unsigned int size */ 1250 stl_p(l++, partition->offset); /* unsigned int offset */ 1251 stl_p(l++, partition->mask); /* unsigned int mask_flags */ 1252 w = (void *) l; 1253 } 1254 1255 stw_p(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */ 1256 stw_p(w++, 12); /* u16 len */ 1257 #if 0 1258 strcpy((void *) w, "por"); /* char reason_str[12] */ 1259 strcpy((void *) w, "charger"); /* char reason_str[12] */ 1260 strcpy((void *) w, "32wd_to"); /* char reason_str[12] */ 1261 strcpy((void *) w, "sw_rst"); /* char reason_str[12] */ 1262 strcpy((void *) w, "mbus"); /* char reason_str[12] */ 1263 strcpy((void *) w, "unknown"); /* char reason_str[12] */ 1264 strcpy((void *) w, "swdg_to"); /* char reason_str[12] */ 1265 strcpy((void *) w, "sec_vio"); /* char reason_str[12] */ 1266 strcpy((void *) w, "pwr_key"); /* char reason_str[12] */ 1267 strcpy((void *) w, "rtc_alarm"); /* char reason_str[12] */ 1268 #else 1269 strcpy((void *) w, "pwr_key"); /* char reason_str[12] */ 1270 #endif 1271 w += 6; 1272 1273 tag = (model == 810) ? "RX-44" : "RX-34"; 1274 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */ 1275 stw_p(w++, 24); /* u16 len */ 1276 strcpy((void *) w, "product"); /* char component[12] */ 1277 w += 6; 1278 strcpy((void *) w, tag); /* char version[12] */ 1279 w += 6; 1280 1281 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */ 1282 stw_p(w++, 24); /* u16 len */ 1283 strcpy((void *) w, "hw-build"); /* char component[12] */ 1284 w += 6; 1285 strcpy((void *) w, "QEMU "); 1286 pstrcat((void *) w, 12, qemu_hw_version()); /* char version[12] */ 1287 w += 6; 1288 1289 tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu"; 1290 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */ 1291 stw_p(w++, 24); /* u16 len */ 1292 strcpy((void *) w, "nolo"); /* char component[12] */ 1293 w += 6; 1294 strcpy((void *) w, tag); /* char version[12] */ 1295 w += 6; 1296 1297 return (void *) w - p; 1298 } 1299 1300 static int n800_atag_setup(const struct arm_boot_info *info, void *p) 1301 { 1302 return n8x0_atag_setup(p, 800); 1303 } 1304 1305 static int n810_atag_setup(const struct arm_boot_info *info, void *p) 1306 { 1307 return n8x0_atag_setup(p, 810); 1308 } 1309 1310 static void n8x0_init(MachineState *machine, 1311 struct arm_boot_info *binfo, int model) 1312 { 1313 struct n800_s *s = (struct n800_s *) g_malloc0(sizeof(*s)); 1314 uint64_t sdram_size = binfo->ram_size; 1315 1316 memory_region_allocate_system_memory(&s->sdram, NULL, "omap2.dram", 1317 sdram_size); 1318 memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE, &s->sdram); 1319 1320 s->mpu = omap2420_mpu_init(&s->sdram, machine->cpu_type); 1321 1322 /* Setup peripherals 1323 * 1324 * Believed external peripherals layout in the N810: 1325 * (spi bus 1) 1326 * tsc2005 1327 * lcd_mipid 1328 * (spi bus 2) 1329 * Conexant cx3110x (WLAN) 1330 * optional: pc2400m (WiMAX) 1331 * (i2c bus 0) 1332 * TLV320AIC33 (audio codec) 1333 * TCM825x (camera by Toshiba) 1334 * lp5521 (clever LEDs) 1335 * tsl2563 (light sensor, hwmon, model 7, rev. 0) 1336 * lm8323 (keypad, manf 00, rev 04) 1337 * (i2c bus 1) 1338 * tmp105 (temperature sensor, hwmon) 1339 * menelaus (pm) 1340 * (somewhere on i2c - maybe N800-only) 1341 * tea5761 (FM tuner) 1342 * (serial 0) 1343 * GPS 1344 * (some serial port) 1345 * csr41814 (Bluetooth) 1346 */ 1347 n8x0_gpio_setup(s); 1348 n8x0_nand_setup(s); 1349 n8x0_i2c_setup(s); 1350 if (model == 800) { 1351 n800_tsc_kbd_setup(s); 1352 } else if (model == 810) { 1353 n810_tsc_setup(s); 1354 n810_kbd_setup(s); 1355 } 1356 n8x0_spi_setup(s); 1357 n8x0_dss_setup(s); 1358 n8x0_cbus_setup(s); 1359 n8x0_uart_setup(s); 1360 if (machine_usb(machine)) { 1361 n8x0_usb_setup(s); 1362 } 1363 1364 if (machine->kernel_filename) { 1365 /* Or at the linux loader. */ 1366 arm_load_kernel(s->mpu->cpu, machine, binfo); 1367 1368 qemu_register_reset(n8x0_boot_init, s); 1369 } 1370 1371 if (option_rom[0].name && 1372 (machine->boot_order[0] == 'n' || !machine->kernel_filename)) { 1373 uint8_t *nolo_tags = g_new(uint8_t, 0x10000); 1374 /* No, wait, better start at the ROM. */ 1375 s->mpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000; 1376 1377 /* This is intended for loading the `secondary.bin' program from 1378 * Nokia images (the NOLO bootloader). The entry point seems 1379 * to be at OMAP2_Q2_BASE + 0x400000. 1380 * 1381 * The `2nd.bin' files contain some kind of earlier boot code and 1382 * for them the entry point needs to be set to OMAP2_SRAM_BASE. 1383 * 1384 * The code above is for loading the `zImage' file from Nokia 1385 * images. */ 1386 load_image_targphys(option_rom[0].name, 1387 OMAP2_Q2_BASE + 0x400000, 1388 sdram_size - 0x400000); 1389 1390 n800_setup_nolo_tags(nolo_tags); 1391 cpu_physical_memory_write(OMAP2_SRAM_BASE, nolo_tags, 0x10000); 1392 g_free(nolo_tags); 1393 } 1394 } 1395 1396 static struct arm_boot_info n800_binfo = { 1397 .loader_start = OMAP2_Q2_BASE, 1398 /* Actually two chips of 0x4000000 bytes each */ 1399 .ram_size = 0x08000000, 1400 .board_id = 0x4f7, 1401 .atag_board = n800_atag_setup, 1402 }; 1403 1404 static struct arm_boot_info n810_binfo = { 1405 .loader_start = OMAP2_Q2_BASE, 1406 /* Actually two chips of 0x4000000 bytes each */ 1407 .ram_size = 0x08000000, 1408 /* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not 1409 * used by some older versions of the bootloader and 5555 is used 1410 * instead (including versions that shipped with many devices). */ 1411 .board_id = 0x60c, 1412 .atag_board = n810_atag_setup, 1413 }; 1414 1415 static void n800_init(MachineState *machine) 1416 { 1417 n8x0_init(machine, &n800_binfo, 800); 1418 } 1419 1420 static void n810_init(MachineState *machine) 1421 { 1422 n8x0_init(machine, &n810_binfo, 810); 1423 } 1424 1425 static void n800_class_init(ObjectClass *oc, void *data) 1426 { 1427 MachineClass *mc = MACHINE_CLASS(oc); 1428 1429 mc->desc = "Nokia N800 tablet aka. RX-34 (OMAP2420)"; 1430 mc->init = n800_init; 1431 mc->default_boot_order = ""; 1432 mc->ignore_memory_transaction_failures = true; 1433 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2"); 1434 } 1435 1436 static const TypeInfo n800_type = { 1437 .name = MACHINE_TYPE_NAME("n800"), 1438 .parent = TYPE_MACHINE, 1439 .class_init = n800_class_init, 1440 }; 1441 1442 static void n810_class_init(ObjectClass *oc, void *data) 1443 { 1444 MachineClass *mc = MACHINE_CLASS(oc); 1445 1446 mc->desc = "Nokia N810 tablet aka. RX-44 (OMAP2420)"; 1447 mc->init = n810_init; 1448 mc->default_boot_order = ""; 1449 mc->ignore_memory_transaction_failures = true; 1450 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2"); 1451 } 1452 1453 static const TypeInfo n810_type = { 1454 .name = MACHINE_TYPE_NAME("n810"), 1455 .parent = TYPE_MACHINE, 1456 .class_init = n810_class_init, 1457 }; 1458 1459 static void nseries_machine_init(void) 1460 { 1461 type_register_static(&n800_type); 1462 type_register_static(&n810_type); 1463 } 1464 1465 type_init(nseries_machine_init) 1466