1 /* 2 * Nokia N-series internet tablets. 3 * 4 * Copyright (C) 2007 Nokia Corporation 5 * Written by Andrzej Zaborowski <andrew@openedhand.com> 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 or 10 * (at your option) version 3 of the License. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "qapi/error.h" 23 #include "cpu.h" 24 #include "chardev/char.h" 25 #include "qemu/cutils.h" 26 #include "qemu/bswap.h" 27 #include "qemu/hw-version.h" 28 #include "sysemu/reset.h" 29 #include "sysemu/runstate.h" 30 #include "sysemu/sysemu.h" 31 #include "hw/arm/omap.h" 32 #include "hw/arm/boot.h" 33 #include "hw/irq.h" 34 #include "ui/console.h" 35 #include "hw/boards.h" 36 #include "hw/i2c/i2c.h" 37 #include "hw/display/blizzard.h" 38 #include "hw/input/lm832x.h" 39 #include "hw/input/tsc2xxx.h" 40 #include "hw/misc/cbus.h" 41 #include "hw/sensor/tmp105.h" 42 #include "hw/qdev-properties.h" 43 #include "hw/block/flash.h" 44 #include "hw/hw.h" 45 #include "hw/loader.h" 46 #include "hw/sysbus.h" 47 #include "qemu/log.h" 48 49 /* Nokia N8x0 support */ 50 struct n800_s { 51 struct omap_mpu_state_s *mpu; 52 53 struct rfbi_chip_s blizzard; 54 struct { 55 void *opaque; 56 uint32_t (*txrx)(void *opaque, uint32_t value, int len); 57 uWireSlave *chip; 58 } ts; 59 60 int keymap[0x80]; 61 DeviceState *kbd; 62 63 DeviceState *usb; 64 void *retu; 65 void *tahvo; 66 DeviceState *nand; 67 }; 68 69 /* GPIO pins */ 70 #define N8X0_TUSB_ENABLE_GPIO 0 71 #define N800_MMC2_WP_GPIO 8 72 #define N800_UNKNOWN_GPIO0 9 /* out */ 73 #define N810_MMC2_VIOSD_GPIO 9 74 #define N810_HEADSET_AMP_GPIO 10 75 #define N800_CAM_TURN_GPIO 12 76 #define N810_GPS_RESET_GPIO 12 77 #define N800_BLIZZARD_POWERDOWN_GPIO 15 78 #define N800_MMC1_WP_GPIO 23 79 #define N810_MMC2_VSD_GPIO 23 80 #define N8X0_ONENAND_GPIO 26 81 #define N810_BLIZZARD_RESET_GPIO 30 82 #define N800_UNKNOWN_GPIO2 53 /* out */ 83 #define N8X0_TUSB_INT_GPIO 58 84 #define N8X0_BT_WKUP_GPIO 61 85 #define N8X0_STI_GPIO 62 86 #define N8X0_CBUS_SEL_GPIO 64 87 #define N8X0_CBUS_DAT_GPIO 65 88 #define N8X0_CBUS_CLK_GPIO 66 89 #define N8X0_WLAN_IRQ_GPIO 87 90 #define N8X0_BT_RESET_GPIO 92 91 #define N8X0_TEA5761_CS_GPIO 93 92 #define N800_UNKNOWN_GPIO 94 93 #define N810_TSC_RESET_GPIO 94 94 #define N800_CAM_ACT_GPIO 95 95 #define N810_GPS_WAKEUP_GPIO 95 96 #define N8X0_MMC_CS_GPIO 96 97 #define N8X0_WLAN_PWR_GPIO 97 98 #define N8X0_BT_HOST_WKUP_GPIO 98 99 #define N810_SPEAKER_AMP_GPIO 101 100 #define N810_KB_LOCK_GPIO 102 101 #define N800_TSC_TS_GPIO 103 102 #define N810_TSC_TS_GPIO 106 103 #define N8X0_HEADPHONE_GPIO 107 104 #define N8X0_RETU_GPIO 108 105 #define N800_TSC_KP_IRQ_GPIO 109 106 #define N810_KEYBOARD_GPIO 109 107 #define N800_BAT_COVER_GPIO 110 108 #define N810_SLIDE_GPIO 110 109 #define N8X0_TAHVO_GPIO 111 110 #define N800_UNKNOWN_GPIO4 112 /* out */ 111 #define N810_SLEEPX_LED_GPIO 112 112 #define N800_TSC_RESET_GPIO 118 /* ? */ 113 #define N810_AIC33_RESET_GPIO 118 114 #define N800_TSC_UNKNOWN_GPIO 119 /* out */ 115 #define N8X0_TMP105_GPIO 125 116 117 /* Config */ 118 #define BT_UART 0 119 #define XLDR_LL_UART 1 120 121 /* Addresses on the I2C bus 0 */ 122 #define N810_TLV320AIC33_ADDR 0x18 /* Audio CODEC */ 123 #define N8X0_TCM825x_ADDR 0x29 /* Camera */ 124 #define N810_LP5521_ADDR 0x32 /* LEDs */ 125 #define N810_TSL2563_ADDR 0x3d /* Light sensor */ 126 #define N810_LM8323_ADDR 0x45 /* Keyboard */ 127 /* Addresses on the I2C bus 1 */ 128 #define N8X0_TMP105_ADDR 0x48 /* Temperature sensor */ 129 #define N8X0_MENELAUS_ADDR 0x72 /* Power management */ 130 131 /* Chipselects on GPMC NOR interface */ 132 #define N8X0_ONENAND_CS 0 133 #define N8X0_USB_ASYNC_CS 1 134 #define N8X0_USB_SYNC_CS 4 135 136 #define N8X0_BD_ADDR 0x00, 0x1a, 0x89, 0x9e, 0x3e, 0x81 137 138 static void n800_mmc_cs_cb(void *opaque, int line, int level) 139 { 140 /* TODO: this seems to actually be connected to the menelaus, to 141 * which also both MMC slots connect. */ 142 omap_mmc_enable((struct omap_mmc_s *) opaque, !level); 143 } 144 145 static void n8x0_gpio_setup(struct n800_s *s) 146 { 147 qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO, 148 qemu_allocate_irq(n800_mmc_cs_cb, s->mpu->mmc, 0)); 149 qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO)); 150 } 151 152 #define MAEMO_CAL_HEADER(...) \ 153 'C', 'o', 'n', 'F', 0x02, 0x00, 0x04, 0x00, \ 154 __VA_ARGS__, \ 155 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 156 157 static const uint8_t n8x0_cal_wlan_mac[] = { 158 MAEMO_CAL_HEADER('w', 'l', 'a', 'n', '-', 'm', 'a', 'c') 159 0x1c, 0x00, 0x00, 0x00, 0x47, 0xd6, 0x69, 0xb3, 160 0x30, 0x08, 0xa0, 0x83, 0x00, 0x00, 0x00, 0x00, 161 0x00, 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00, 162 0x89, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00, 0x00, 163 0x5d, 0x00, 0x00, 0x00, 0xc1, 0x00, 0x00, 0x00, 164 }; 165 166 static const uint8_t n8x0_cal_bt_id[] = { 167 MAEMO_CAL_HEADER('b', 't', '-', 'i', 'd', 0, 0, 0) 168 0x0a, 0x00, 0x00, 0x00, 0xa3, 0x4b, 0xf6, 0x96, 169 0xa8, 0xeb, 0xb2, 0x41, 0x00, 0x00, 0x00, 0x00, 170 N8X0_BD_ADDR, 171 }; 172 173 static void n8x0_nand_setup(struct n800_s *s) 174 { 175 char *otp_region; 176 DriveInfo *dinfo; 177 178 s->nand = qdev_new("onenand"); 179 qdev_prop_set_uint16(s->nand, "manufacturer_id", NAND_MFR_SAMSUNG); 180 /* Either 0x40 or 0x48 are OK for the device ID */ 181 qdev_prop_set_uint16(s->nand, "device_id", 0x48); 182 qdev_prop_set_uint16(s->nand, "version_id", 0); 183 qdev_prop_set_int32(s->nand, "shift", 1); 184 dinfo = drive_get(IF_MTD, 0, 0); 185 if (dinfo) { 186 qdev_prop_set_drive_err(s->nand, "drive", blk_by_legacy_dinfo(dinfo), 187 &error_fatal); 188 } 189 sysbus_realize_and_unref(SYS_BUS_DEVICE(s->nand), &error_fatal); 190 sysbus_connect_irq(SYS_BUS_DEVICE(s->nand), 0, 191 qdev_get_gpio_in(s->mpu->gpio, N8X0_ONENAND_GPIO)); 192 omap_gpmc_attach(s->mpu->gpmc, N8X0_ONENAND_CS, 193 sysbus_mmio_get_region(SYS_BUS_DEVICE(s->nand), 0)); 194 otp_region = onenand_raw_otp(s->nand); 195 196 memcpy(otp_region + 0x000, n8x0_cal_wlan_mac, sizeof(n8x0_cal_wlan_mac)); 197 memcpy(otp_region + 0x800, n8x0_cal_bt_id, sizeof(n8x0_cal_bt_id)); 198 /* XXX: in theory should also update the OOB for both pages */ 199 } 200 201 static qemu_irq n8x0_system_powerdown; 202 203 static void n8x0_powerdown_req(Notifier *n, void *opaque) 204 { 205 qemu_irq_raise(n8x0_system_powerdown); 206 } 207 208 static Notifier n8x0_system_powerdown_notifier = { 209 .notify = n8x0_powerdown_req 210 }; 211 212 static void n8x0_i2c_setup(struct n800_s *s) 213 { 214 DeviceState *dev; 215 qemu_irq tmp_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TMP105_GPIO); 216 I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]); 217 218 /* Attach a menelaus PM chip */ 219 dev = DEVICE(i2c_slave_create_simple(i2c, "twl92230", N8X0_MENELAUS_ADDR)); 220 qdev_connect_gpio_out(dev, 3, 221 qdev_get_gpio_in(s->mpu->ih[0], 222 OMAP_INT_24XX_SYS_NIRQ)); 223 224 n8x0_system_powerdown = qdev_get_gpio_in(dev, 3); 225 qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); 226 227 /* Attach a TMP105 PM chip (A0 wired to ground) */ 228 dev = DEVICE(i2c_slave_create_simple(i2c, TYPE_TMP105, N8X0_TMP105_ADDR)); 229 qdev_connect_gpio_out(dev, 0, tmp_irq); 230 } 231 232 /* Touchscreen and keypad controller */ 233 static MouseTransformInfo n800_pointercal = { 234 .x = 800, 235 .y = 480, 236 .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 }, 237 }; 238 239 static MouseTransformInfo n810_pointercal = { 240 .x = 800, 241 .y = 480, 242 .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 }, 243 }; 244 245 #define RETU_KEYCODE 61 /* F3 */ 246 247 static void n800_key_event(void *opaque, int keycode) 248 { 249 struct n800_s *s = (struct n800_s *) opaque; 250 int code = s->keymap[keycode & 0x7f]; 251 252 if (code == -1) { 253 if ((keycode & 0x7f) == RETU_KEYCODE) { 254 retu_key_event(s->retu, !(keycode & 0x80)); 255 } 256 return; 257 } 258 259 tsc210x_key_event(s->ts.chip, code, !(keycode & 0x80)); 260 } 261 262 static const int n800_keys[16] = { 263 -1, 264 72, /* Up */ 265 63, /* Home (F5) */ 266 -1, 267 75, /* Left */ 268 28, /* Enter */ 269 77, /* Right */ 270 -1, 271 1, /* Cycle (ESC) */ 272 80, /* Down */ 273 62, /* Menu (F4) */ 274 -1, 275 66, /* Zoom- (F8) */ 276 64, /* FullScreen (F6) */ 277 65, /* Zoom+ (F7) */ 278 -1, 279 }; 280 281 static void n800_tsc_kbd_setup(struct n800_s *s) 282 { 283 int i; 284 285 /* XXX: are the three pins inverted inside the chip between the 286 * tsc and the cpu (N4111)? */ 287 qemu_irq penirq = NULL; /* NC */ 288 qemu_irq kbirq = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_KP_IRQ_GPIO); 289 qemu_irq dav = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_TS_GPIO); 290 291 s->ts.chip = tsc2301_init(penirq, kbirq, dav); 292 s->ts.opaque = s->ts.chip->opaque; 293 s->ts.txrx = tsc210x_txrx; 294 295 for (i = 0; i < 0x80; i++) { 296 s->keymap[i] = -1; 297 } 298 for (i = 0; i < 0x10; i++) { 299 if (n800_keys[i] >= 0) { 300 s->keymap[n800_keys[i]] = i; 301 } 302 } 303 304 qemu_add_kbd_event_handler(n800_key_event, s); 305 306 tsc210x_set_transform(s->ts.chip, &n800_pointercal); 307 } 308 309 static void n810_tsc_setup(struct n800_s *s) 310 { 311 qemu_irq pintdav = qdev_get_gpio_in(s->mpu->gpio, N810_TSC_TS_GPIO); 312 313 s->ts.opaque = tsc2005_init(pintdav); 314 s->ts.txrx = tsc2005_txrx; 315 316 tsc2005_set_transform(s->ts.opaque, &n810_pointercal); 317 } 318 319 /* N810 Keyboard controller */ 320 static void n810_key_event(void *opaque, int keycode) 321 { 322 struct n800_s *s = (struct n800_s *) opaque; 323 int code = s->keymap[keycode & 0x7f]; 324 325 if (code == -1) { 326 if ((keycode & 0x7f) == RETU_KEYCODE) { 327 retu_key_event(s->retu, !(keycode & 0x80)); 328 } 329 return; 330 } 331 332 lm832x_key_event(s->kbd, code, !(keycode & 0x80)); 333 } 334 335 #define M 0 336 337 static int n810_keys[0x80] = { 338 [0x01] = 16, /* Q */ 339 [0x02] = 37, /* K */ 340 [0x03] = 24, /* O */ 341 [0x04] = 25, /* P */ 342 [0x05] = 14, /* Backspace */ 343 [0x06] = 30, /* A */ 344 [0x07] = 31, /* S */ 345 [0x08] = 32, /* D */ 346 [0x09] = 33, /* F */ 347 [0x0a] = 34, /* G */ 348 [0x0b] = 35, /* H */ 349 [0x0c] = 36, /* J */ 350 351 [0x11] = 17, /* W */ 352 [0x12] = 62, /* Menu (F4) */ 353 [0x13] = 38, /* L */ 354 [0x14] = 40, /* ' (Apostrophe) */ 355 [0x16] = 44, /* Z */ 356 [0x17] = 45, /* X */ 357 [0x18] = 46, /* C */ 358 [0x19] = 47, /* V */ 359 [0x1a] = 48, /* B */ 360 [0x1b] = 49, /* N */ 361 [0x1c] = 42, /* Shift (Left shift) */ 362 [0x1f] = 65, /* Zoom+ (F7) */ 363 364 [0x21] = 18, /* E */ 365 [0x22] = 39, /* ; (Semicolon) */ 366 [0x23] = 12, /* - (Minus) */ 367 [0x24] = 13, /* = (Equal) */ 368 [0x2b] = 56, /* Fn (Left Alt) */ 369 [0x2c] = 50, /* M */ 370 [0x2f] = 66, /* Zoom- (F8) */ 371 372 [0x31] = 19, /* R */ 373 [0x32] = 29 | M, /* Right Ctrl */ 374 [0x34] = 57, /* Space */ 375 [0x35] = 51, /* , (Comma) */ 376 [0x37] = 72 | M, /* Up */ 377 [0x3c] = 82 | M, /* Compose (Insert) */ 378 [0x3f] = 64, /* FullScreen (F6) */ 379 380 [0x41] = 20, /* T */ 381 [0x44] = 52, /* . (Dot) */ 382 [0x46] = 77 | M, /* Right */ 383 [0x4f] = 63, /* Home (F5) */ 384 [0x51] = 21, /* Y */ 385 [0x53] = 80 | M, /* Down */ 386 [0x55] = 28, /* Enter */ 387 [0x5f] = 1, /* Cycle (ESC) */ 388 389 [0x61] = 22, /* U */ 390 [0x64] = 75 | M, /* Left */ 391 392 [0x71] = 23, /* I */ 393 #if 0 394 [0x75] = 28 | M, /* KP Enter (KP Enter) */ 395 #else 396 [0x75] = 15, /* KP Enter (Tab) */ 397 #endif 398 }; 399 400 #undef M 401 402 static void n810_kbd_setup(struct n800_s *s) 403 { 404 qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO); 405 int i; 406 407 for (i = 0; i < 0x80; i++) { 408 s->keymap[i] = -1; 409 } 410 for (i = 0; i < 0x80; i++) { 411 if (n810_keys[i] > 0) { 412 s->keymap[n810_keys[i]] = i; 413 } 414 } 415 416 qemu_add_kbd_event_handler(n810_key_event, s); 417 418 /* Attach the LM8322 keyboard to the I2C bus, 419 * should happen in n8x0_i2c_setup and s->kbd be initialised here. */ 420 s->kbd = DEVICE(i2c_slave_create_simple(omap_i2c_bus(s->mpu->i2c[0]), 421 TYPE_LM8323, N810_LM8323_ADDR)); 422 qdev_connect_gpio_out(s->kbd, 0, kbd_irq); 423 } 424 425 /* LCD MIPI DBI-C controller (URAL) */ 426 struct mipid_s { 427 int resp[4]; 428 int param[4]; 429 int p; 430 int pm; 431 int cmd; 432 433 int sleep; 434 int booster; 435 int te; 436 int selfcheck; 437 int partial; 438 int normal; 439 int vscr; 440 int invert; 441 int onoff; 442 int gamma; 443 uint32_t id; 444 }; 445 446 static void mipid_reset(struct mipid_s *s) 447 { 448 s->pm = 0; 449 s->cmd = 0; 450 451 s->sleep = 1; 452 s->booster = 0; 453 s->selfcheck = 454 (1 << 7) | /* Register loading OK. */ 455 (1 << 5) | /* The chip is attached. */ 456 (1 << 4); /* Display glass still in one piece. */ 457 s->te = 0; 458 s->partial = 0; 459 s->normal = 1; 460 s->vscr = 0; 461 s->invert = 0; 462 s->onoff = 1; 463 s->gamma = 0; 464 } 465 466 static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len) 467 { 468 struct mipid_s *s = (struct mipid_s *) opaque; 469 uint8_t ret; 470 471 if (len > 9) { 472 hw_error("%s: FIXME: bad SPI word width %i\n", __func__, len); 473 } 474 475 if (s->p >= ARRAY_SIZE(s->resp)) { 476 ret = 0; 477 } else { 478 ret = s->resp[s->p++]; 479 } 480 if (s->pm-- > 0) { 481 s->param[s->pm] = cmd; 482 } else { 483 s->cmd = cmd; 484 } 485 486 switch (s->cmd) { 487 case 0x00: /* NOP */ 488 break; 489 490 case 0x01: /* SWRESET */ 491 mipid_reset(s); 492 break; 493 494 case 0x02: /* BSTROFF */ 495 s->booster = 0; 496 break; 497 case 0x03: /* BSTRON */ 498 s->booster = 1; 499 break; 500 501 case 0x04: /* RDDID */ 502 s->p = 0; 503 s->resp[0] = (s->id >> 16) & 0xff; 504 s->resp[1] = (s->id >> 8) & 0xff; 505 s->resp[2] = (s->id >> 0) & 0xff; 506 break; 507 508 case 0x06: /* RD_RED */ 509 case 0x07: /* RD_GREEN */ 510 /* XXX the bootloader sometimes issues RD_BLUE meaning RDDID so 511 * for the bootloader one needs to change this. */ 512 case 0x08: /* RD_BLUE */ 513 s->p = 0; 514 /* TODO: return first pixel components */ 515 s->resp[0] = 0x01; 516 break; 517 518 case 0x09: /* RDDST */ 519 s->p = 0; 520 s->resp[0] = s->booster << 7; 521 s->resp[1] = (5 << 4) | (s->partial << 2) | 522 (s->sleep << 1) | s->normal; 523 s->resp[2] = (s->vscr << 7) | (s->invert << 5) | 524 (s->onoff << 2) | (s->te << 1) | (s->gamma >> 2); 525 s->resp[3] = s->gamma << 6; 526 break; 527 528 case 0x0a: /* RDDPM */ 529 s->p = 0; 530 s->resp[0] = (s->onoff << 2) | (s->normal << 3) | (s->sleep << 4) | 531 (s->partial << 5) | (s->sleep << 6) | (s->booster << 7); 532 break; 533 case 0x0b: /* RDDMADCTR */ 534 s->p = 0; 535 s->resp[0] = 0; 536 break; 537 case 0x0c: /* RDDCOLMOD */ 538 s->p = 0; 539 s->resp[0] = 5; /* 65K colours */ 540 break; 541 case 0x0d: /* RDDIM */ 542 s->p = 0; 543 s->resp[0] = (s->invert << 5) | (s->vscr << 7) | s->gamma; 544 break; 545 case 0x0e: /* RDDSM */ 546 s->p = 0; 547 s->resp[0] = s->te << 7; 548 break; 549 case 0x0f: /* RDDSDR */ 550 s->p = 0; 551 s->resp[0] = s->selfcheck; 552 break; 553 554 case 0x10: /* SLPIN */ 555 s->sleep = 1; 556 break; 557 case 0x11: /* SLPOUT */ 558 s->sleep = 0; 559 s->selfcheck ^= 1 << 6; /* POFF self-diagnosis Ok */ 560 break; 561 562 case 0x12: /* PTLON */ 563 s->partial = 1; 564 s->normal = 0; 565 s->vscr = 0; 566 break; 567 case 0x13: /* NORON */ 568 s->partial = 0; 569 s->normal = 1; 570 s->vscr = 0; 571 break; 572 573 case 0x20: /* INVOFF */ 574 s->invert = 0; 575 break; 576 case 0x21: /* INVON */ 577 s->invert = 1; 578 break; 579 580 case 0x22: /* APOFF */ 581 case 0x23: /* APON */ 582 goto bad_cmd; 583 584 case 0x25: /* WRCNTR */ 585 if (s->pm < 0) { 586 s->pm = 1; 587 } 588 goto bad_cmd; 589 590 case 0x26: /* GAMSET */ 591 if (!s->pm) { 592 s->gamma = ctz32(s->param[0] & 0xf); 593 if (s->gamma == 32) { 594 s->gamma = -1; /* XXX: should this be 0? */ 595 } 596 } else if (s->pm < 0) { 597 s->pm = 1; 598 } 599 break; 600 601 case 0x28: /* DISPOFF */ 602 s->onoff = 0; 603 break; 604 case 0x29: /* DISPON */ 605 s->onoff = 1; 606 break; 607 608 case 0x2a: /* CASET */ 609 case 0x2b: /* RASET */ 610 case 0x2c: /* RAMWR */ 611 case 0x2d: /* RGBSET */ 612 case 0x2e: /* RAMRD */ 613 case 0x30: /* PTLAR */ 614 case 0x33: /* SCRLAR */ 615 goto bad_cmd; 616 617 case 0x34: /* TEOFF */ 618 s->te = 0; 619 break; 620 case 0x35: /* TEON */ 621 if (!s->pm) { 622 s->te = 1; 623 } else if (s->pm < 0) { 624 s->pm = 1; 625 } 626 break; 627 628 case 0x36: /* MADCTR */ 629 goto bad_cmd; 630 631 case 0x37: /* VSCSAD */ 632 s->partial = 0; 633 s->normal = 0; 634 s->vscr = 1; 635 break; 636 637 case 0x38: /* IDMOFF */ 638 case 0x39: /* IDMON */ 639 case 0x3a: /* COLMOD */ 640 goto bad_cmd; 641 642 case 0xb0: /* CLKINT / DISCTL */ 643 case 0xb1: /* CLKEXT */ 644 if (s->pm < 0) { 645 s->pm = 2; 646 } 647 break; 648 649 case 0xb4: /* FRMSEL */ 650 break; 651 652 case 0xb5: /* FRM8SEL */ 653 case 0xb6: /* TMPRNG / INIESC */ 654 case 0xb7: /* TMPHIS / NOP2 */ 655 case 0xb8: /* TMPREAD / MADCTL */ 656 case 0xba: /* DISTCTR */ 657 case 0xbb: /* EPVOL */ 658 goto bad_cmd; 659 660 case 0xbd: /* Unknown */ 661 s->p = 0; 662 s->resp[0] = 0; 663 s->resp[1] = 1; 664 break; 665 666 case 0xc2: /* IFMOD */ 667 if (s->pm < 0) { 668 s->pm = 2; 669 } 670 break; 671 672 case 0xc6: /* PWRCTL */ 673 case 0xc7: /* PPWRCTL */ 674 case 0xd0: /* EPWROUT */ 675 case 0xd1: /* EPWRIN */ 676 case 0xd4: /* RDEV */ 677 case 0xd5: /* RDRR */ 678 goto bad_cmd; 679 680 case 0xda: /* RDID1 */ 681 s->p = 0; 682 s->resp[0] = (s->id >> 16) & 0xff; 683 break; 684 case 0xdb: /* RDID2 */ 685 s->p = 0; 686 s->resp[0] = (s->id >> 8) & 0xff; 687 break; 688 case 0xdc: /* RDID3 */ 689 s->p = 0; 690 s->resp[0] = (s->id >> 0) & 0xff; 691 break; 692 693 default: 694 bad_cmd: 695 qemu_log_mask(LOG_GUEST_ERROR, 696 "%s: unknown command 0x%02x\n", __func__, s->cmd); 697 break; 698 } 699 700 return ret; 701 } 702 703 static void *mipid_init(void) 704 { 705 struct mipid_s *s = (struct mipid_s *) g_malloc0(sizeof(*s)); 706 707 s->id = 0x838f03; 708 mipid_reset(s); 709 710 return s; 711 } 712 713 static void n8x0_spi_setup(struct n800_s *s) 714 { 715 void *tsc = s->ts.opaque; 716 void *mipid = mipid_init(); 717 718 omap_mcspi_attach(s->mpu->mcspi[0], s->ts.txrx, tsc, 0); 719 omap_mcspi_attach(s->mpu->mcspi[0], mipid_txrx, mipid, 1); 720 } 721 722 /* This task is normally performed by the bootloader. If we're loading 723 * a kernel directly, we need to enable the Blizzard ourselves. */ 724 static void n800_dss_init(struct rfbi_chip_s *chip) 725 { 726 uint8_t *fb_blank; 727 728 chip->write(chip->opaque, 0, 0x2a); /* LCD Width register */ 729 chip->write(chip->opaque, 1, 0x64); 730 chip->write(chip->opaque, 0, 0x2c); /* LCD HNDP register */ 731 chip->write(chip->opaque, 1, 0x1e); 732 chip->write(chip->opaque, 0, 0x2e); /* LCD Height 0 register */ 733 chip->write(chip->opaque, 1, 0xe0); 734 chip->write(chip->opaque, 0, 0x30); /* LCD Height 1 register */ 735 chip->write(chip->opaque, 1, 0x01); 736 chip->write(chip->opaque, 0, 0x32); /* LCD VNDP register */ 737 chip->write(chip->opaque, 1, 0x06); 738 chip->write(chip->opaque, 0, 0x68); /* Display Mode register */ 739 chip->write(chip->opaque, 1, 1); /* Enable bit */ 740 741 chip->write(chip->opaque, 0, 0x6c); 742 chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */ 743 chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */ 744 chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */ 745 chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */ 746 chip->write(chip->opaque, 1, 0x1f); /* Input X End Position */ 747 chip->write(chip->opaque, 1, 0x03); /* Input X End Position */ 748 chip->write(chip->opaque, 1, 0xdf); /* Input Y End Position */ 749 chip->write(chip->opaque, 1, 0x01); /* Input Y End Position */ 750 chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */ 751 chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */ 752 chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */ 753 chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */ 754 chip->write(chip->opaque, 1, 0x1f); /* Output X End Position */ 755 chip->write(chip->opaque, 1, 0x03); /* Output X End Position */ 756 chip->write(chip->opaque, 1, 0xdf); /* Output Y End Position */ 757 chip->write(chip->opaque, 1, 0x01); /* Output Y End Position */ 758 chip->write(chip->opaque, 1, 0x01); /* Input Data Format */ 759 chip->write(chip->opaque, 1, 0x01); /* Data Source Select */ 760 761 fb_blank = memset(g_malloc(800 * 480 * 2), 0xff, 800 * 480 * 2); 762 /* Display Memory Data Port */ 763 chip->block(chip->opaque, 1, fb_blank, 800 * 480 * 2, 800); 764 g_free(fb_blank); 765 } 766 767 static void n8x0_dss_setup(struct n800_s *s) 768 { 769 s->blizzard.opaque = s1d13745_init(NULL); 770 s->blizzard.block = s1d13745_write_block; 771 s->blizzard.write = s1d13745_write; 772 s->blizzard.read = s1d13745_read; 773 774 omap_rfbi_attach(s->mpu->dss, 0, &s->blizzard); 775 } 776 777 static void n8x0_cbus_setup(struct n800_s *s) 778 { 779 qemu_irq dat_out = qdev_get_gpio_in(s->mpu->gpio, N8X0_CBUS_DAT_GPIO); 780 qemu_irq retu_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_RETU_GPIO); 781 qemu_irq tahvo_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TAHVO_GPIO); 782 783 CBus *cbus = cbus_init(dat_out); 784 785 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk); 786 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat); 787 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel); 788 789 cbus_attach(cbus, s->retu = retu_init(retu_irq, 1)); 790 cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1)); 791 } 792 793 static void n8x0_usb_setup(struct n800_s *s) 794 { 795 SysBusDevice *dev; 796 s->usb = qdev_new("tusb6010"); 797 dev = SYS_BUS_DEVICE(s->usb); 798 sysbus_realize_and_unref(dev, &error_fatal); 799 sysbus_connect_irq(dev, 0, 800 qdev_get_gpio_in(s->mpu->gpio, N8X0_TUSB_INT_GPIO)); 801 /* Using the NOR interface */ 802 omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_ASYNC_CS, 803 sysbus_mmio_get_region(dev, 0)); 804 omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_SYNC_CS, 805 sysbus_mmio_get_region(dev, 1)); 806 qdev_connect_gpio_out(s->mpu->gpio, N8X0_TUSB_ENABLE_GPIO, 807 qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */ 808 } 809 810 /* Setup done before the main bootloader starts by some early setup code 811 * - used when we want to run the main bootloader in emulation. This 812 * isn't documented. */ 813 static uint32_t n800_pinout[104] = { 814 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0, 815 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808, 816 0x08080808, 0x180800c4, 0x00b80000, 0x08080808, 817 0x080800bc, 0x00cc0808, 0x08081818, 0x18180128, 818 0x01241800, 0x18181818, 0x000000f0, 0x01300000, 819 0x00001b0b, 0x1b0f0138, 0x00e0181b, 0x1b031b0b, 820 0x180f0078, 0x00740018, 0x0f0f0f1a, 0x00000080, 821 0x007c0000, 0x00000000, 0x00000088, 0x00840000, 822 0x00000000, 0x00000094, 0x00980300, 0x0f180003, 823 0x0000008c, 0x00900f0f, 0x0f0f1b00, 0x0f00009c, 824 0x01140000, 0x1b1b0f18, 0x0818013c, 0x01400008, 825 0x00001818, 0x000b0110, 0x010c1800, 0x0b030b0f, 826 0x181800f4, 0x00f81818, 0x00000018, 0x000000fc, 827 0x00401808, 0x00000000, 0x0f1b0030, 0x003c0008, 828 0x00000000, 0x00000038, 0x00340000, 0x00000000, 829 0x1a080070, 0x00641a1a, 0x08080808, 0x08080060, 830 0x005c0808, 0x08080808, 0x08080058, 0x00540808, 831 0x08080808, 0x0808006c, 0x00680808, 0x08080808, 832 0x000000a8, 0x00b00000, 0x08080808, 0x000000a0, 833 0x00a40000, 0x00000000, 0x08ff0050, 0x004c0808, 834 0xffffffff, 0xffff0048, 0x0044ffff, 0xffffffff, 835 0x000000ac, 0x01040800, 0x08080b0f, 0x18180100, 836 0x01081818, 0x0b0b1808, 0x1a0300e4, 0x012c0b1a, 837 0x02020018, 0x0b000134, 0x011c0800, 0x0b1b1b00, 838 0x0f0000c8, 0x00ec181b, 0x000f0f02, 0x00180118, 839 0x01200000, 0x0f0b1b1b, 0x0f0200e8, 0x0000020b, 840 }; 841 842 static void n800_setup_nolo_tags(void *sram_base) 843 { 844 int i; 845 uint32_t *p = sram_base + 0x8000; 846 uint32_t *v = sram_base + 0xa000; 847 848 memset(p, 0, 0x3000); 849 850 strcpy((void *) (p + 0), "QEMU N800"); 851 852 strcpy((void *) (p + 8), "F5"); 853 854 stl_p(p + 10, 0x04f70000); 855 strcpy((void *) (p + 9), "RX-34"); 856 857 /* RAM size in MB? */ 858 stl_p(p + 12, 0x80); 859 860 /* Pointer to the list of tags */ 861 stl_p(p + 13, OMAP2_SRAM_BASE + 0x9000); 862 863 /* The NOLO tags start here */ 864 p = sram_base + 0x9000; 865 #define ADD_TAG(tag, len) \ 866 stw_p((uint16_t *) p + 0, tag); \ 867 stw_p((uint16_t *) p + 1, len); p++; \ 868 stl_p(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff)); 869 870 /* OMAP STI console? Pin out settings? */ 871 ADD_TAG(0x6e01, 414); 872 for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) { 873 stl_p(v++, n800_pinout[i]); 874 } 875 876 /* Kernel memsize? */ 877 ADD_TAG(0x6e05, 1); 878 stl_p(v++, 2); 879 880 /* NOLO serial console */ 881 ADD_TAG(0x6e02, 4); 882 stl_p(v++, XLDR_LL_UART); /* UART number (1 - 3) */ 883 884 #if 0 885 /* CBUS settings (Retu/AVilma) */ 886 ADD_TAG(0x6e03, 6); 887 stw_p((uint16_t *) v + 0, 65); /* CBUS GPIO0 */ 888 stw_p((uint16_t *) v + 1, 66); /* CBUS GPIO1 */ 889 stw_p((uint16_t *) v + 2, 64); /* CBUS GPIO2 */ 890 v += 2; 891 #endif 892 893 /* Nokia ASIC BB5 (Retu/Tahvo) */ 894 ADD_TAG(0x6e0a, 4); 895 stw_p((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */ 896 stw_p((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */ 897 v++; 898 899 /* LCD console? */ 900 ADD_TAG(0x6e04, 4); 901 stw_p((uint16_t *) v + 0, 30); /* ??? */ 902 stw_p((uint16_t *) v + 1, 24); /* ??? */ 903 v++; 904 905 #if 0 906 /* LCD settings */ 907 ADD_TAG(0x6e06, 2); 908 stw_p((uint16_t *) (v++), 15); /* ??? */ 909 #endif 910 911 /* I^2C (Menelaus) */ 912 ADD_TAG(0x6e07, 4); 913 stl_p(v++, 0x00720000); /* ??? */ 914 915 /* Unknown */ 916 ADD_TAG(0x6e0b, 6); 917 stw_p((uint16_t *) v + 0, 94); /* ??? */ 918 stw_p((uint16_t *) v + 1, 23); /* ??? */ 919 stw_p((uint16_t *) v + 2, 0); /* ??? */ 920 v += 2; 921 922 /* OMAP gpio switch info */ 923 ADD_TAG(0x6e0c, 80); 924 strcpy((void *) v, "bat_cover"); v += 3; 925 stw_p((uint16_t *) v + 0, 110); /* GPIO num ??? */ 926 stw_p((uint16_t *) v + 1, 1); /* GPIO num ??? */ 927 v += 2; 928 strcpy((void *) v, "cam_act"); v += 3; 929 stw_p((uint16_t *) v + 0, 95); /* GPIO num ??? */ 930 stw_p((uint16_t *) v + 1, 32); /* GPIO num ??? */ 931 v += 2; 932 strcpy((void *) v, "cam_turn"); v += 3; 933 stw_p((uint16_t *) v + 0, 12); /* GPIO num ??? */ 934 stw_p((uint16_t *) v + 1, 33); /* GPIO num ??? */ 935 v += 2; 936 strcpy((void *) v, "headphone"); v += 3; 937 stw_p((uint16_t *) v + 0, 107); /* GPIO num ??? */ 938 stw_p((uint16_t *) v + 1, 17); /* GPIO num ??? */ 939 v += 2; 940 941 /* Bluetooth */ 942 ADD_TAG(0x6e0e, 12); 943 stl_p(v++, 0x5c623d01); /* ??? */ 944 stl_p(v++, 0x00000201); /* ??? */ 945 stl_p(v++, 0x00000000); /* ??? */ 946 947 /* CX3110x WLAN settings */ 948 ADD_TAG(0x6e0f, 8); 949 stl_p(v++, 0x00610025); /* ??? */ 950 stl_p(v++, 0xffff0057); /* ??? */ 951 952 /* MMC host settings */ 953 ADD_TAG(0x6e10, 12); 954 stl_p(v++, 0xffff000f); /* ??? */ 955 stl_p(v++, 0xffffffff); /* ??? */ 956 stl_p(v++, 0x00000060); /* ??? */ 957 958 /* OneNAND chip select */ 959 ADD_TAG(0x6e11, 10); 960 stl_p(v++, 0x00000401); /* ??? */ 961 stl_p(v++, 0x0002003a); /* ??? */ 962 stl_p(v++, 0x00000002); /* ??? */ 963 964 /* TEA5761 sensor settings */ 965 ADD_TAG(0x6e12, 2); 966 stl_p(v++, 93); /* GPIO num ??? */ 967 968 #if 0 969 /* Unknown tag */ 970 ADD_TAG(6e09, 0); 971 972 /* Kernel UART / console */ 973 ADD_TAG(6e12, 0); 974 #endif 975 976 /* End of the list */ 977 stl_p(p++, 0x00000000); 978 stl_p(p++, 0x00000000); 979 } 980 981 /* This task is normally performed by the bootloader. If we're loading 982 * a kernel directly, we need to set up GPMC mappings ourselves. */ 983 static void n800_gpmc_init(struct n800_s *s) 984 { 985 uint32_t config7 = 986 (0xf << 8) | /* MASKADDRESS */ 987 (1 << 6) | /* CSVALID */ 988 (4 << 0); /* BASEADDRESS */ 989 990 cpu_physical_memory_write(0x6800a078, /* GPMC_CONFIG7_0 */ 991 &config7, sizeof(config7)); 992 } 993 994 /* Setup sequence done by the bootloader */ 995 static void n8x0_boot_init(void *opaque) 996 { 997 struct n800_s *s = (struct n800_s *) opaque; 998 uint32_t buf; 999 1000 /* PRCM setup */ 1001 #define omap_writel(addr, val) \ 1002 buf = (val); \ 1003 cpu_physical_memory_write(addr, &buf, sizeof(buf)) 1004 1005 omap_writel(0x48008060, 0x41); /* PRCM_CLKSRC_CTRL */ 1006 omap_writel(0x48008070, 1); /* PRCM_CLKOUT_CTRL */ 1007 omap_writel(0x48008078, 0); /* PRCM_CLKEMUL_CTRL */ 1008 omap_writel(0x48008090, 0); /* PRCM_VOLTSETUP */ 1009 omap_writel(0x48008094, 0); /* PRCM_CLKSSETUP */ 1010 omap_writel(0x48008098, 0); /* PRCM_POLCTRL */ 1011 omap_writel(0x48008140, 2); /* CM_CLKSEL_MPU */ 1012 omap_writel(0x48008148, 0); /* CM_CLKSTCTRL_MPU */ 1013 omap_writel(0x48008158, 1); /* RM_RSTST_MPU */ 1014 omap_writel(0x480081c8, 0x15); /* PM_WKDEP_MPU */ 1015 omap_writel(0x480081d4, 0x1d4); /* PM_EVGENCTRL_MPU */ 1016 omap_writel(0x480081d8, 0); /* PM_EVEGENONTIM_MPU */ 1017 omap_writel(0x480081dc, 0); /* PM_EVEGENOFFTIM_MPU */ 1018 omap_writel(0x480081e0, 0xc); /* PM_PWSTCTRL_MPU */ 1019 omap_writel(0x48008200, 0x047e7ff7); /* CM_FCLKEN1_CORE */ 1020 omap_writel(0x48008204, 0x00000004); /* CM_FCLKEN2_CORE */ 1021 omap_writel(0x48008210, 0x047e7ff1); /* CM_ICLKEN1_CORE */ 1022 omap_writel(0x48008214, 0x00000004); /* CM_ICLKEN2_CORE */ 1023 omap_writel(0x4800821c, 0x00000000); /* CM_ICLKEN4_CORE */ 1024 omap_writel(0x48008230, 0); /* CM_AUTOIDLE1_CORE */ 1025 omap_writel(0x48008234, 0); /* CM_AUTOIDLE2_CORE */ 1026 omap_writel(0x48008238, 7); /* CM_AUTOIDLE3_CORE */ 1027 omap_writel(0x4800823c, 0); /* CM_AUTOIDLE4_CORE */ 1028 omap_writel(0x48008240, 0x04360626); /* CM_CLKSEL1_CORE */ 1029 omap_writel(0x48008244, 0x00000014); /* CM_CLKSEL2_CORE */ 1030 omap_writel(0x48008248, 0); /* CM_CLKSTCTRL_CORE */ 1031 omap_writel(0x48008300, 0x00000000); /* CM_FCLKEN_GFX */ 1032 omap_writel(0x48008310, 0x00000000); /* CM_ICLKEN_GFX */ 1033 omap_writel(0x48008340, 0x00000001); /* CM_CLKSEL_GFX */ 1034 omap_writel(0x48008400, 0x00000004); /* CM_FCLKEN_WKUP */ 1035 omap_writel(0x48008410, 0x00000004); /* CM_ICLKEN_WKUP */ 1036 omap_writel(0x48008440, 0x00000000); /* CM_CLKSEL_WKUP */ 1037 omap_writel(0x48008500, 0x000000cf); /* CM_CLKEN_PLL */ 1038 omap_writel(0x48008530, 0x0000000c); /* CM_AUTOIDLE_PLL */ 1039 omap_writel(0x48008540, /* CM_CLKSEL1_PLL */ 1040 (0x78 << 12) | (6 << 8)); 1041 omap_writel(0x48008544, 2); /* CM_CLKSEL2_PLL */ 1042 1043 /* GPMC setup */ 1044 n800_gpmc_init(s); 1045 1046 /* Video setup */ 1047 n800_dss_init(&s->blizzard); 1048 1049 /* CPU setup */ 1050 s->mpu->cpu->env.GE = 0x5; 1051 1052 /* If the machine has a slided keyboard, open it */ 1053 if (s->kbd) { 1054 qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO)); 1055 } 1056 } 1057 1058 #define OMAP_TAG_NOKIA_BT 0x4e01 1059 #define OMAP_TAG_WLAN_CX3110X 0x4e02 1060 #define OMAP_TAG_CBUS 0x4e03 1061 #define OMAP_TAG_EM_ASIC_BB5 0x4e04 1062 1063 static struct omap_gpiosw_info_s { 1064 const char *name; 1065 int line; 1066 int type; 1067 } n800_gpiosw_info[] = { 1068 { 1069 "bat_cover", N800_BAT_COVER_GPIO, 1070 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, 1071 }, { 1072 "cam_act", N800_CAM_ACT_GPIO, 1073 OMAP_GPIOSW_TYPE_ACTIVITY, 1074 }, { 1075 "cam_turn", N800_CAM_TURN_GPIO, 1076 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED, 1077 }, { 1078 "headphone", N8X0_HEADPHONE_GPIO, 1079 OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, 1080 }, 1081 { NULL } 1082 }, n810_gpiosw_info[] = { 1083 { 1084 "gps_reset", N810_GPS_RESET_GPIO, 1085 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT, 1086 }, { 1087 "gps_wakeup", N810_GPS_WAKEUP_GPIO, 1088 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT, 1089 }, { 1090 "headphone", N8X0_HEADPHONE_GPIO, 1091 OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, 1092 }, { 1093 "kb_lock", N810_KB_LOCK_GPIO, 1094 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, 1095 }, { 1096 "sleepx_led", N810_SLEEPX_LED_GPIO, 1097 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED | OMAP_GPIOSW_OUTPUT, 1098 }, { 1099 "slide", N810_SLIDE_GPIO, 1100 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, 1101 }, 1102 { NULL } 1103 }; 1104 1105 static struct omap_partition_info_s { 1106 uint32_t offset; 1107 uint32_t size; 1108 int mask; 1109 const char *name; 1110 } n800_part_info[] = { 1111 { 0x00000000, 0x00020000, 0x3, "bootloader" }, 1112 { 0x00020000, 0x00060000, 0x0, "config" }, 1113 { 0x00080000, 0x00200000, 0x0, "kernel" }, 1114 { 0x00280000, 0x00200000, 0x3, "initfs" }, 1115 { 0x00480000, 0x0fb80000, 0x3, "rootfs" }, 1116 1117 { 0, 0, 0, NULL } 1118 }, n810_part_info[] = { 1119 { 0x00000000, 0x00020000, 0x3, "bootloader" }, 1120 { 0x00020000, 0x00060000, 0x0, "config" }, 1121 { 0x00080000, 0x00220000, 0x0, "kernel" }, 1122 { 0x002a0000, 0x00400000, 0x0, "initfs" }, 1123 { 0x006a0000, 0x0f960000, 0x0, "rootfs" }, 1124 1125 { 0, 0, 0, NULL } 1126 }; 1127 1128 static uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; 1129 1130 static int n8x0_atag_setup(void *p, int model) 1131 { 1132 uint8_t *b; 1133 uint16_t *w; 1134 uint32_t *l; 1135 struct omap_gpiosw_info_s *gpiosw; 1136 struct omap_partition_info_s *partition; 1137 const char *tag; 1138 1139 w = p; 1140 1141 stw_p(w++, OMAP_TAG_UART); /* u16 tag */ 1142 stw_p(w++, 4); /* u16 len */ 1143 stw_p(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */ 1144 w++; 1145 1146 #if 0 1147 stw_p(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */ 1148 stw_p(w++, 4); /* u16 len */ 1149 stw_p(w++, XLDR_LL_UART + 1); /* u8 console_uart */ 1150 stw_p(w++, 115200); /* u32 console_speed */ 1151 #endif 1152 1153 stw_p(w++, OMAP_TAG_LCD); /* u16 tag */ 1154 stw_p(w++, 36); /* u16 len */ 1155 strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */ 1156 w += 8; 1157 strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */ 1158 w += 8; 1159 stw_p(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */ 1160 stw_p(w++, 24); /* u8 data_lines */ 1161 1162 stw_p(w++, OMAP_TAG_CBUS); /* u16 tag */ 1163 stw_p(w++, 8); /* u16 len */ 1164 stw_p(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */ 1165 stw_p(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */ 1166 stw_p(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */ 1167 w++; 1168 1169 stw_p(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */ 1170 stw_p(w++, 4); /* u16 len */ 1171 stw_p(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */ 1172 stw_p(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */ 1173 1174 gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info; 1175 for (; gpiosw->name; gpiosw++) { 1176 stw_p(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */ 1177 stw_p(w++, 20); /* u16 len */ 1178 strcpy((void *) w, gpiosw->name); /* char name[12] */ 1179 w += 6; 1180 stw_p(w++, gpiosw->line); /* u16 gpio */ 1181 stw_p(w++, gpiosw->type); 1182 stw_p(w++, 0); 1183 stw_p(w++, 0); 1184 } 1185 1186 stw_p(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */ 1187 stw_p(w++, 12); /* u16 len */ 1188 b = (void *) w; 1189 stb_p(b++, 0x01); /* u8 chip_type (CSR) */ 1190 stb_p(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */ 1191 stb_p(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */ 1192 stb_p(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */ 1193 stb_p(b++, BT_UART + 1); /* u8 bt_uart */ 1194 memcpy(b, &n8x0_bd_addr, 6); /* u8 bd_addr[6] */ 1195 b += 6; 1196 stb_p(b++, 0x02); /* u8 bt_sysclk (38.4) */ 1197 w = (void *) b; 1198 1199 stw_p(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */ 1200 stw_p(w++, 8); /* u16 len */ 1201 stw_p(w++, 0x25); /* u8 chip_type */ 1202 stw_p(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */ 1203 stw_p(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */ 1204 stw_p(w++, -1); /* s16 spi_cs_gpio */ 1205 1206 stw_p(w++, OMAP_TAG_MMC); /* u16 tag */ 1207 stw_p(w++, 16); /* u16 len */ 1208 if (model == 810) { 1209 stw_p(w++, 0x23f); /* unsigned flags */ 1210 stw_p(w++, -1); /* s16 power_pin */ 1211 stw_p(w++, -1); /* s16 switch_pin */ 1212 stw_p(w++, -1); /* s16 wp_pin */ 1213 stw_p(w++, 0x240); /* unsigned flags */ 1214 stw_p(w++, 0xc000); /* s16 power_pin */ 1215 stw_p(w++, 0x0248); /* s16 switch_pin */ 1216 stw_p(w++, 0xc000); /* s16 wp_pin */ 1217 } else { 1218 stw_p(w++, 0xf); /* unsigned flags */ 1219 stw_p(w++, -1); /* s16 power_pin */ 1220 stw_p(w++, -1); /* s16 switch_pin */ 1221 stw_p(w++, -1); /* s16 wp_pin */ 1222 stw_p(w++, 0); /* unsigned flags */ 1223 stw_p(w++, 0); /* s16 power_pin */ 1224 stw_p(w++, 0); /* s16 switch_pin */ 1225 stw_p(w++, 0); /* s16 wp_pin */ 1226 } 1227 1228 stw_p(w++, OMAP_TAG_TEA5761); /* u16 tag */ 1229 stw_p(w++, 4); /* u16 len */ 1230 stw_p(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */ 1231 w++; 1232 1233 partition = (model == 810) ? n810_part_info : n800_part_info; 1234 for (; partition->name; partition++) { 1235 stw_p(w++, OMAP_TAG_PARTITION); /* u16 tag */ 1236 stw_p(w++, 28); /* u16 len */ 1237 strcpy((void *) w, partition->name); /* char name[16] */ 1238 l = (void *) (w + 8); 1239 stl_p(l++, partition->size); /* unsigned int size */ 1240 stl_p(l++, partition->offset); /* unsigned int offset */ 1241 stl_p(l++, partition->mask); /* unsigned int mask_flags */ 1242 w = (void *) l; 1243 } 1244 1245 stw_p(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */ 1246 stw_p(w++, 12); /* u16 len */ 1247 #if 0 1248 strcpy((void *) w, "por"); /* char reason_str[12] */ 1249 strcpy((void *) w, "charger"); /* char reason_str[12] */ 1250 strcpy((void *) w, "32wd_to"); /* char reason_str[12] */ 1251 strcpy((void *) w, "sw_rst"); /* char reason_str[12] */ 1252 strcpy((void *) w, "mbus"); /* char reason_str[12] */ 1253 strcpy((void *) w, "unknown"); /* char reason_str[12] */ 1254 strcpy((void *) w, "swdg_to"); /* char reason_str[12] */ 1255 strcpy((void *) w, "sec_vio"); /* char reason_str[12] */ 1256 strcpy((void *) w, "pwr_key"); /* char reason_str[12] */ 1257 strcpy((void *) w, "rtc_alarm"); /* char reason_str[12] */ 1258 #else 1259 strcpy((void *) w, "pwr_key"); /* char reason_str[12] */ 1260 #endif 1261 w += 6; 1262 1263 tag = (model == 810) ? "RX-44" : "RX-34"; 1264 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */ 1265 stw_p(w++, 24); /* u16 len */ 1266 strcpy((void *) w, "product"); /* char component[12] */ 1267 w += 6; 1268 strcpy((void *) w, tag); /* char version[12] */ 1269 w += 6; 1270 1271 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */ 1272 stw_p(w++, 24); /* u16 len */ 1273 strcpy((void *) w, "hw-build"); /* char component[12] */ 1274 w += 6; 1275 strcpy((void *) w, "QEMU "); 1276 pstrcat((void *) w, 12, qemu_hw_version()); /* char version[12] */ 1277 w += 6; 1278 1279 tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu"; 1280 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */ 1281 stw_p(w++, 24); /* u16 len */ 1282 strcpy((void *) w, "nolo"); /* char component[12] */ 1283 w += 6; 1284 strcpy((void *) w, tag); /* char version[12] */ 1285 w += 6; 1286 1287 return (void *) w - p; 1288 } 1289 1290 static int n800_atag_setup(const struct arm_boot_info *info, void *p) 1291 { 1292 return n8x0_atag_setup(p, 800); 1293 } 1294 1295 static int n810_atag_setup(const struct arm_boot_info *info, void *p) 1296 { 1297 return n8x0_atag_setup(p, 810); 1298 } 1299 1300 static void n8x0_init(MachineState *machine, 1301 struct arm_boot_info *binfo, int model) 1302 { 1303 struct n800_s *s = (struct n800_s *) g_malloc0(sizeof(*s)); 1304 MachineClass *mc = MACHINE_GET_CLASS(machine); 1305 1306 if (machine->ram_size != mc->default_ram_size) { 1307 char *sz = size_to_str(mc->default_ram_size); 1308 error_report("Invalid RAM size, should be %s", sz); 1309 g_free(sz); 1310 exit(EXIT_FAILURE); 1311 } 1312 binfo->ram_size = machine->ram_size; 1313 1314 memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE, 1315 machine->ram); 1316 1317 s->mpu = omap2420_mpu_init(machine->ram, machine->cpu_type); 1318 1319 /* Setup peripherals 1320 * 1321 * Believed external peripherals layout in the N810: 1322 * (spi bus 1) 1323 * tsc2005 1324 * lcd_mipid 1325 * (spi bus 2) 1326 * Conexant cx3110x (WLAN) 1327 * optional: pc2400m (WiMAX) 1328 * (i2c bus 0) 1329 * TLV320AIC33 (audio codec) 1330 * TCM825x (camera by Toshiba) 1331 * lp5521 (clever LEDs) 1332 * tsl2563 (light sensor, hwmon, model 7, rev. 0) 1333 * lm8323 (keypad, manf 00, rev 04) 1334 * (i2c bus 1) 1335 * tmp105 (temperature sensor, hwmon) 1336 * menelaus (pm) 1337 * (somewhere on i2c - maybe N800-only) 1338 * tea5761 (FM tuner) 1339 * (serial 0) 1340 * GPS 1341 * (some serial port) 1342 * csr41814 (Bluetooth) 1343 */ 1344 n8x0_gpio_setup(s); 1345 n8x0_nand_setup(s); 1346 n8x0_i2c_setup(s); 1347 if (model == 800) { 1348 n800_tsc_kbd_setup(s); 1349 } else if (model == 810) { 1350 n810_tsc_setup(s); 1351 n810_kbd_setup(s); 1352 } 1353 n8x0_spi_setup(s); 1354 n8x0_dss_setup(s); 1355 n8x0_cbus_setup(s); 1356 if (machine_usb(machine)) { 1357 n8x0_usb_setup(s); 1358 } 1359 1360 if (machine->kernel_filename) { 1361 /* Or at the linux loader. */ 1362 arm_load_kernel(s->mpu->cpu, machine, binfo); 1363 1364 qemu_register_reset(n8x0_boot_init, s); 1365 } 1366 1367 if (option_rom[0].name && 1368 (machine->boot_config.order[0] == 'n' || !machine->kernel_filename)) { 1369 uint8_t *nolo_tags = g_new(uint8_t, 0x10000); 1370 /* No, wait, better start at the ROM. */ 1371 s->mpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000; 1372 1373 /* 1374 * This is intended for loading the `secondary.bin' program from 1375 * Nokia images (the NOLO bootloader). The entry point seems 1376 * to be at OMAP2_Q2_BASE + 0x400000. 1377 * 1378 * The `2nd.bin' files contain some kind of earlier boot code and 1379 * for them the entry point needs to be set to OMAP2_SRAM_BASE. 1380 * 1381 * The code above is for loading the `zImage' file from Nokia 1382 * images. 1383 */ 1384 if (load_image_targphys(option_rom[0].name, 1385 OMAP2_Q2_BASE + 0x400000, 1386 machine->ram_size - 0x400000) < 0) { 1387 error_report("Failed to load secondary bootloader %s", 1388 option_rom[0].name); 1389 exit(EXIT_FAILURE); 1390 } 1391 1392 n800_setup_nolo_tags(nolo_tags); 1393 cpu_physical_memory_write(OMAP2_SRAM_BASE, nolo_tags, 0x10000); 1394 g_free(nolo_tags); 1395 } 1396 } 1397 1398 static struct arm_boot_info n800_binfo = { 1399 .loader_start = OMAP2_Q2_BASE, 1400 .board_id = 0x4f7, 1401 .atag_board = n800_atag_setup, 1402 }; 1403 1404 static struct arm_boot_info n810_binfo = { 1405 .loader_start = OMAP2_Q2_BASE, 1406 /* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not 1407 * used by some older versions of the bootloader and 5555 is used 1408 * instead (including versions that shipped with many devices). */ 1409 .board_id = 0x60c, 1410 .atag_board = n810_atag_setup, 1411 }; 1412 1413 static void n800_init(MachineState *machine) 1414 { 1415 n8x0_init(machine, &n800_binfo, 800); 1416 } 1417 1418 static void n810_init(MachineState *machine) 1419 { 1420 n8x0_init(machine, &n810_binfo, 810); 1421 } 1422 1423 static void n800_class_init(ObjectClass *oc, void *data) 1424 { 1425 MachineClass *mc = MACHINE_CLASS(oc); 1426 1427 mc->desc = "Nokia N800 tablet aka. RX-34 (OMAP2420)"; 1428 mc->init = n800_init; 1429 mc->default_boot_order = ""; 1430 mc->ignore_memory_transaction_failures = true; 1431 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2"); 1432 /* Actually two chips of 0x4000000 bytes each */ 1433 mc->default_ram_size = 0x08000000; 1434 mc->default_ram_id = "omap2.dram"; 1435 } 1436 1437 static const TypeInfo n800_type = { 1438 .name = MACHINE_TYPE_NAME("n800"), 1439 .parent = TYPE_MACHINE, 1440 .class_init = n800_class_init, 1441 }; 1442 1443 static void n810_class_init(ObjectClass *oc, void *data) 1444 { 1445 MachineClass *mc = MACHINE_CLASS(oc); 1446 1447 mc->desc = "Nokia N810 tablet aka. RX-44 (OMAP2420)"; 1448 mc->init = n810_init; 1449 mc->default_boot_order = ""; 1450 mc->ignore_memory_transaction_failures = true; 1451 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2"); 1452 /* Actually two chips of 0x4000000 bytes each */ 1453 mc->default_ram_size = 0x08000000; 1454 mc->default_ram_id = "omap2.dram"; 1455 } 1456 1457 static const TypeInfo n810_type = { 1458 .name = MACHINE_TYPE_NAME("n810"), 1459 .parent = TYPE_MACHINE, 1460 .class_init = n810_class_init, 1461 }; 1462 1463 static void nseries_machine_init(void) 1464 { 1465 type_register_static(&n800_type); 1466 type_register_static(&n810_type); 1467 } 1468 1469 type_init(nseries_machine_init) 1470